TY  - JOUR
AU  - Jegdić, Bore
AU  - Bobić, Biljana
AU  - Bošnjakov, Milica
PY  - 2017
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/2086
AB  - This paper briefly describes the relationship between corrosion potential and different corrosion forms of metals and their welded joints. The nature of corrosion potential and the method of its measurement is also described. It is shown in a simple way how the tendency of welded joints to galvanic corrosion can be determined on the basis of the meausred corrosion potential value. It is also shown that different metallurgical and corrosion states of aluminim alloys can be evaluated using the measured value of corrosion potential. The tendency to intergranular corrosion in the welded joints of stainless steels can be predicted on the basis of corrosion potential. Due to a large number of corrosion potential measurement applications this work is divided into two parts (part I and part II).
AB  - U ovom radu opisana je veza između korozionog potencijala i različitih vidova korozije metala i njihovih zavarenih spojeva. Pored toga, opisana je priroda korozionog potencijala i postupak njegovog merenja.Na jednostavan način pokazano je kako se na osnovu vrednosti korozionog potencijala može odrediti sklonost zavarenih spojeva aluminijumskih legura i zavarenih spojeva ugljeničnih čelika prema galvanskoj koroziji. Takođe je pokazano kako sena osnovu merenja korozionog potencijala mogu odrediti različita metalurška i koroziona stanja aluminijumskih legura, kao i sklonost zavarenih spojeva nerđajućih čelika prema interkristalnoj koroziji. Zbog velikog broja primena merenja korozionog potencijala, rad je podeljen na dva dela (deo I i deo II).
PB  - DUZS - Društvo za unapređivanje zavarivanja u Srbiji, Beograd
T2  - Zavarivanje i zavarene konstrukcije
T1  - Reationship between corrosion potential and diferent corrosion forms of metals, alloys and theirs welded joints: Part I
T1  - Veza izmenu korozionog potencijala i različitih vidova korozije metala, legura i njihovih zavarenih spojeva - deo I
VL  - 62
IS  - 2
SP  - 65
EP  - 76
DO  - 10.5937/zzk1702065J
ER  - 

@article{
author = "Jegdić, Bore and Bobić, Biljana and Bošnjakov, Milica",
year = "2017",
abstract = "This paper briefly describes the relationship between corrosion potential and different corrosion forms of metals and their welded joints. The nature of corrosion potential and the method of its measurement is also described. It is shown in a simple way how the tendency of welded joints to galvanic corrosion can be determined on the basis of the meausred corrosion potential value. It is also shown that different metallurgical and corrosion states of aluminim alloys can be evaluated using the measured value of corrosion potential. The tendency to intergranular corrosion in the welded joints of stainless steels can be predicted on the basis of corrosion potential. Due to a large number of corrosion potential measurement applications this work is divided into two parts (part I and part II)., U ovom radu opisana je veza između korozionog potencijala i različitih vidova korozije metala i njihovih zavarenih spojeva. Pored toga, opisana je priroda korozionog potencijala i postupak njegovog merenja.Na jednostavan način pokazano je kako se na osnovu vrednosti korozionog potencijala može odrediti sklonost zavarenih spojeva aluminijumskih legura i zavarenih spojeva ugljeničnih čelika prema galvanskoj koroziji. Takođe je pokazano kako sena osnovu merenja korozionog potencijala mogu odrediti različita metalurška i koroziona stanja aluminijumskih legura, kao i sklonost zavarenih spojeva nerđajućih čelika prema interkristalnoj koroziji. Zbog velikog broja primena merenja korozionog potencijala, rad je podeljen na dva dela (deo I i deo II).",
publisher = "DUZS - Društvo za unapređivanje zavarivanja u Srbiji, Beograd",
journal = "Zavarivanje i zavarene konstrukcije",
title = "Reationship between corrosion potential and diferent corrosion forms of metals, alloys and theirs welded joints: Part I, Veza izmenu korozionog potencijala i različitih vidova korozije metala, legura i njihovih zavarenih spojeva - deo I",
volume = "62",
number = "2",
pages = "65-76",
doi = "10.5937/zzk1702065J"
}

Jegdić, B., Bobić, B.,& Bošnjakov, M.. (2017). Reationship between corrosion potential and diferent corrosion forms of metals, alloys and theirs welded joints: Part I. in Zavarivanje i zavarene konstrukcije
DUZS - Društvo za unapređivanje zavarivanja u Srbiji, Beograd., 62(2), 65-76.
https://doi.org/10.5937/zzk1702065J

Jegdić B, Bobić B, Bošnjakov M. Reationship between corrosion potential and diferent corrosion forms of metals, alloys and theirs welded joints: Part I. in Zavarivanje i zavarene konstrukcije. 2017;62(2):65-76.
doi:10.5937/zzk1702065J .

Jegdić, Bore, Bobić, Biljana, Bošnjakov, Milica, "Reationship between corrosion potential and diferent corrosion forms of metals, alloys and theirs welded joints: Part I" in Zavarivanje i zavarene konstrukcije, 62, no. 2 (2017):65-76,
https://doi.org/10.5937/zzk1702065J . .

TY  - JOUR
AU  - Jegdić, Bore
AU  - Bobić, Biljana
AU  - Bošnjakov, Milica
AU  - Behar, Alić
PY  - 2017
UR  - https://metall-mater-eng.com/index.php/home/article/view/274
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/3914
AB  - Pitting corrosion resistance and intergranular corrosion of the austenitic stainless steel X5Cr Ni18-10 were tested on the base metal, heat affected zone and weld metal. Testing of pitting corrosion was performed by the potentiodynamic polarization method, while testing of intergranular corrosion was performed by the method of electrochemical potentiokinetic reactivation with double loop. The base metal was completely resistant to intergranular corrosion, while the heat affected zone showed a slight susceptibility to intergranular corrosion. Indicators of pitting corrosion resistance for the weld metal and the base metal were very similar, but their values are significantly higher than the values for the heat affected zone. This was caused by reduction of the chromium concentration in the grain boundary areas in the heat affected zone, even though the carbon content in the examined stainless steel is low (0.04 wt. % C).
PB  - Serbia : Association of Metallurgical Engineers of Serbia
T2  - Metallurgical & Materials Engineering
T1  - Testing of intergranular and pitting corrosion in sensitized welded joints of austenitic stainless steel
VL  - 23
IS  - 2
SP  - 109
EP  - 117
DO  - 10.30544/274
ER  - 

@article{
author = "Jegdić, Bore and Bobić, Biljana and Bošnjakov, Milica and Behar, Alić",
year = "2017",
abstract = "Pitting corrosion resistance and intergranular corrosion of the austenitic stainless steel X5Cr Ni18-10 were tested on the base metal, heat affected zone and weld metal. Testing of pitting corrosion was performed by the potentiodynamic polarization method, while testing of intergranular corrosion was performed by the method of electrochemical potentiokinetic reactivation with double loop. The base metal was completely resistant to intergranular corrosion, while the heat affected zone showed a slight susceptibility to intergranular corrosion. Indicators of pitting corrosion resistance for the weld metal and the base metal were very similar, but their values are significantly higher than the values for the heat affected zone. This was caused by reduction of the chromium concentration in the grain boundary areas in the heat affected zone, even though the carbon content in the examined stainless steel is low (0.04 wt. % C).",
publisher = "Serbia : Association of Metallurgical Engineers of Serbia",
journal = "Metallurgical & Materials Engineering",
title = "Testing of intergranular and pitting corrosion in sensitized welded joints of austenitic stainless steel",
volume = "23",
number = "2",
pages = "109-117",
doi = "10.30544/274"
}

Jegdić, B., Bobić, B., Bošnjakov, M.,& Behar, A.. (2017). Testing of intergranular and pitting corrosion in sensitized welded joints of austenitic stainless steel. in Metallurgical & Materials Engineering
Serbia : Association of Metallurgical Engineers of Serbia., 23(2), 109-117.
https://doi.org/10.30544/274

Jegdić B, Bobić B, Bošnjakov M, Behar A. Testing of intergranular and pitting corrosion in sensitized welded joints of austenitic stainless steel. in Metallurgical & Materials Engineering. 2017;23(2):109-117.
doi:10.30544/274 .

Jegdić, Bore, Bobić, Biljana, Bošnjakov, Milica, Behar, Alić, "Testing of intergranular and pitting corrosion in sensitized welded joints of austenitic stainless steel" in Metallurgical & Materials Engineering, 23, no. 2 (2017):109-117,
https://doi.org/10.30544/274 . .