Linić, S., Linić, M., Radojković, B., Jegdić, B.,& Lučanin, V.. (2023). Metoda i program PATS za detekciju oblasti izražene turbulencije kod prirodne konvekcije. .
https://hdl.handle.net/21.15107/rcub_cer_7233

Linić S, Linić M, Radojković B, Jegdić B, Lučanin V. Metoda i program PATS za detekciju oblasti izražene turbulencije kod prirodne konvekcije. 2023;.
https://hdl.handle.net/21.15107/rcub_cer_7233 .

Linić, Suzana, Linić, Mihajlo, Radojković, Bojana, Jegdić, Bore, Lučanin, Vojkan, "Metoda i program PATS za detekciju oblasti izražene turbulencije kod prirodne konvekcije" (2023),
https://hdl.handle.net/21.15107/rcub_cer_7233 .

TY  - JOUR
AU  - Linić, Suzana
AU  - Lučanin, Vojkan J.
AU  - Živković, Srđan P.
AU  - Raković, Marko
AU  - Ristić, Slavica S.
AU  - Radojković, Bojana
AU  - Polić, Suzana R.
PY  - 2021
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/4240
AB  - A multidisciplinary research method was employed with the intention to create a series of bio-inspired flattened airfoils, observe their aerodynamic characteristics, and analyse their applicability to small devices or to designs of high-speed trains, within the shortest period in the conceptual stage. A research specimen of a kingfisher, selected for biomimicry, was examined with the following methods: visual inspection, analysis of photographs, manufacturing quality control measurement with a 3D laser scanner, and microscopy. A basic multi-arc-line profile, re-engineered from the overlapped specimen shape data and based on the observations, was used for designing a series of seven derived airfoils. The aerodynamic characteristics of the bio-inspired airfoils were obtained with the panel methods at low and moderate subsonic speeds, while the small transonic difference method was used in the high-subsonic speed range. Basic and ellipse-like airfoils produce higher total drag at low and moderate velocities and higher forebody drag in the high-subsonic range when compared to derived and parabola-like airfoils. The obtained critical Mach numbers are in the range from 0.76 to 0.78, where three bionic airfoils show values equal to or smaller than the values of ellipse- and parabola-like airfoils. The profile with the shortest bio-inspired relative chord has a higher critical Mach number value than the parabola-like profile. The sonic lines above these profiles appear at close positions. The applied set of examination methods of the bio-inspired design is not time consuming and produces sufficiently good results in the conceptual stage. Therefore, a further development of unique and adjusted numerical methods and codes at pre-computational fluid dynamics run is encouraged, together with shape parameterization.
PB  - Springer Nature Switzerland AG 2020
T2  - Journal of the Brazilian Society of Mechanical Sciences and Engineering
T1  - Multidisciplinary research method for designing and selection of bio-inspired profiles in the conceptual designing stage
VL  - 43
IS  - 1
SP  - 57
DO  - 10.1007/s40430-020-02789-2
ER  - 

@article{
author = "Linić, Suzana and Lučanin, Vojkan J. and Živković, Srđan P. and Raković, Marko and Ristić, Slavica S. and Radojković, Bojana and Polić, Suzana R.",
year = "2021",
abstract = "A multidisciplinary research method was employed with the intention to create a series of bio-inspired flattened airfoils, observe their aerodynamic characteristics, and analyse their applicability to small devices or to designs of high-speed trains, within the shortest period in the conceptual stage. A research specimen of a kingfisher, selected for biomimicry, was examined with the following methods: visual inspection, analysis of photographs, manufacturing quality control measurement with a 3D laser scanner, and microscopy. A basic multi-arc-line profile, re-engineered from the overlapped specimen shape data and based on the observations, was used for designing a series of seven derived airfoils. The aerodynamic characteristics of the bio-inspired airfoils were obtained with the panel methods at low and moderate subsonic speeds, while the small transonic difference method was used in the high-subsonic speed range. Basic and ellipse-like airfoils produce higher total drag at low and moderate velocities and higher forebody drag in the high-subsonic range when compared to derived and parabola-like airfoils. The obtained critical Mach numbers are in the range from 0.76 to 0.78, where three bionic airfoils show values equal to or smaller than the values of ellipse- and parabola-like airfoils. The profile with the shortest bio-inspired relative chord has a higher critical Mach number value than the parabola-like profile. The sonic lines above these profiles appear at close positions. The applied set of examination methods of the bio-inspired design is not time consuming and produces sufficiently good results in the conceptual stage. Therefore, a further development of unique and adjusted numerical methods and codes at pre-computational fluid dynamics run is encouraged, together with shape parameterization.",
publisher = "Springer Nature Switzerland AG 2020",
journal = "Journal of the Brazilian Society of Mechanical Sciences and Engineering",
title = "Multidisciplinary research method for designing and selection of bio-inspired profiles in the conceptual designing stage",
volume = "43",
number = "1",
pages = "57",
doi = "10.1007/s40430-020-02789-2"
}

Linić, S., Lučanin, V. J., Živković, S. P., Raković, M., Ristić, S. S., Radojković, B.,& Polić, S. R.. (2021). Multidisciplinary research method for designing and selection of bio-inspired profiles in the conceptual designing stage. in Journal of the Brazilian Society of Mechanical Sciences and Engineering
Springer Nature Switzerland AG 2020., 43(1), 57.
https://doi.org/10.1007/s40430-020-02789-2

Linić S, Lučanin VJ, Živković SP, Raković M, Ristić SS, Radojković B, Polić SR. Multidisciplinary research method for designing and selection of bio-inspired profiles in the conceptual designing stage. in Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2021;43(1):57.
doi:10.1007/s40430-020-02789-2 .

Linić, Suzana, Lučanin, Vojkan J., Živković, Srđan P., Raković, Marko, Ristić, Slavica S., Radojković, Bojana, Polić, Suzana R., "Multidisciplinary research method for designing and selection of bio-inspired profiles in the conceptual designing stage" in Journal of the Brazilian Society of Mechanical Sciences and Engineering, 43, no. 1 (2021):57,
https://doi.org/10.1007/s40430-020-02789-2 . .

TY  - JOUR
AU  - Marunkić, Dunja
AU  - Pejić, Jovanka
AU  - Jegdić, Bore
AU  - Linić, Suzana
AU  - Perišić, Jasmina
AU  - Radojković, Bojana
AU  - Marinković, Aleksandar D.
PY  - 2021
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/4787
AB  - The corrosion behavior of AA7049 aluminum alloy in NaCl solution in the presence of environmentally-friendly corrosion inhibitors (Ce-chloride, Ce-formate, Ce-acetate, and Ce-propionate) was analyzed. The chemical composition of intermetallic particles was evaluated by a Scanning Electron Microscope, equipped for Energy Dispersive Spectroscopy measurements, while the presence of cerium and type of functional groups in inhibitors surface layers were analyzed by X-ray Photoelectron Spectroscopy and Fourier-Transform Infrared Spectroscopy, respectively. Inhibitor efficiencies were tested by applying electrochemical techniques such as Electrochemical Impedance Spectroscopy and Linear Sweep Voltammetry. Ce-propionate showed a greater inhibitory effect than all other tested corrosion inhibitors. The inhibitory effect decreases in the following order: Ce-propionate > Ce-acetate > Ce-formate > Ce-chloride. Propionate anions have a higher water contact angle and also a longer aliphatic side chain than acetate and formate anions. The mechanism of inhibitory action of Ce-propionate and other tested corrosion inhibitors has been proposed.
PB  - IOP Publishing
T2  - Journal of Electrochemical Society
T1  - Inhibitory Effect of Cerium Salts of Lower Carboxylic Acids on Al-Zn-Mg-Cu Alloy in NaCl Solution
VL  - 168
IS  - 8
SP  - 081501
DO  - 10.1149/1945-7111/ac1895
ER  - 

@article{
author = "Marunkić, Dunja and Pejić, Jovanka and Jegdić, Bore and Linić, Suzana and Perišić, Jasmina and Radojković, Bojana and Marinković, Aleksandar D.",
year = "2021",
abstract = "The corrosion behavior of AA7049 aluminum alloy in NaCl solution in the presence of environmentally-friendly corrosion inhibitors (Ce-chloride, Ce-formate, Ce-acetate, and Ce-propionate) was analyzed. The chemical composition of intermetallic particles was evaluated by a Scanning Electron Microscope, equipped for Energy Dispersive Spectroscopy measurements, while the presence of cerium and type of functional groups in inhibitors surface layers were analyzed by X-ray Photoelectron Spectroscopy and Fourier-Transform Infrared Spectroscopy, respectively. Inhibitor efficiencies were tested by applying electrochemical techniques such as Electrochemical Impedance Spectroscopy and Linear Sweep Voltammetry. Ce-propionate showed a greater inhibitory effect than all other tested corrosion inhibitors. The inhibitory effect decreases in the following order: Ce-propionate > Ce-acetate > Ce-formate > Ce-chloride. Propionate anions have a higher water contact angle and also a longer aliphatic side chain than acetate and formate anions. The mechanism of inhibitory action of Ce-propionate and other tested corrosion inhibitors has been proposed.",
publisher = "IOP Publishing",
journal = "Journal of Electrochemical Society",
title = "Inhibitory Effect of Cerium Salts of Lower Carboxylic Acids on Al-Zn-Mg-Cu Alloy in NaCl Solution",
volume = "168",
number = "8",
pages = "081501",
doi = "10.1149/1945-7111/ac1895"
}

Marunkić, D., Pejić, J., Jegdić, B., Linić, S., Perišić, J., Radojković, B.,& Marinković, A. D.. (2021). Inhibitory Effect of Cerium Salts of Lower Carboxylic Acids on Al-Zn-Mg-Cu Alloy in NaCl Solution. in Journal of Electrochemical Society
IOP Publishing., 168(8), 081501.
https://doi.org/10.1149/1945-7111/ac1895

Marunkić D, Pejić J, Jegdić B, Linić S, Perišić J, Radojković B, Marinković AD. Inhibitory Effect of Cerium Salts of Lower Carboxylic Acids on Al-Zn-Mg-Cu Alloy in NaCl Solution. in Journal of Electrochemical Society. 2021;168(8):081501.
doi:10.1149/1945-7111/ac1895 .

Marunkić, Dunja, Pejić, Jovanka, Jegdić, Bore, Linić, Suzana, Perišić, Jasmina, Radojković, Bojana, Marinković, Aleksandar D., "Inhibitory Effect of Cerium Salts of Lower Carboxylic Acids on Al-Zn-Mg-Cu Alloy in NaCl Solution" in Journal of Electrochemical Society, 168, no. 8 (2021):081501,
https://doi.org/10.1149/1945-7111/ac1895 . .

TY  - JOUR
AU  - Linić, Suzana
AU  - Linić, Mihailo S.
AU  - Radojković, Bojana
AU  - Ristić, Slavica S.
AU  - Jegdić, Bore
PY  - 2021
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/4778
AB  - This paper presents a study of a free convection flow around the walls of a ventilation mill of the Thermal Power Plant “Kostolac B”, Kostolac, Serbia. A combined method consists of thermography and software post-processing, PATS. The PATS is specially developed for recognition of turbulence zones by the custom processing of large input data sets from thermal videos. The calculations determine maximum temperature fluctuation i.e. peak-to-peak fluctuation at every spot during the recording time. Three thermal videos of the walls were analyzed. Maximum temperature fluctuation occurred in the zones close to the obstacles, which are thus recognized as one of the main sources of turbulence. Besides, PATS has recognized fine camera oscillations and mechanical movements of a flexible material near the dozer wall. The detected zones of turbulence correspond to the previous studies and to the theory. The method shows good potential in the field of free convective flow research through the improvement of testing efficiency and cost savings. State-of-the-art thermograph cameras and updated software are recommended.
PB  - Serbia : Serbian Society of Heat Transfer Engineers
T2  - Thermal Science
T1  - Turbulence recognition in free convective flow by thermal - video post -processing in the case of a thermal power plant mill
VL  - 25
IS  - 4
SP  - 2447
EP  - 2458
DO  - 10.2298/TSCI200907341L
ER  - 

@article{
author = "Linić, Suzana and Linić, Mihailo S. and Radojković, Bojana and Ristić, Slavica S. and Jegdić, Bore",
year = "2021",
abstract = "This paper presents a study of a free convection flow around the walls of a ventilation mill of the Thermal Power Plant “Kostolac B”, Kostolac, Serbia. A combined method consists of thermography and software post-processing, PATS. The PATS is specially developed for recognition of turbulence zones by the custom processing of large input data sets from thermal videos. The calculations determine maximum temperature fluctuation i.e. peak-to-peak fluctuation at every spot during the recording time. Three thermal videos of the walls were analyzed. Maximum temperature fluctuation occurred in the zones close to the obstacles, which are thus recognized as one of the main sources of turbulence. Besides, PATS has recognized fine camera oscillations and mechanical movements of a flexible material near the dozer wall. The detected zones of turbulence correspond to the previous studies and to the theory. The method shows good potential in the field of free convective flow research through the improvement of testing efficiency and cost savings. State-of-the-art thermograph cameras and updated software are recommended.",
publisher = "Serbia : Serbian Society of Heat Transfer Engineers",
journal = "Thermal Science",
title = "Turbulence recognition in free convective flow by thermal - video post -processing in the case of a thermal power plant mill",
volume = "25",
number = "4",
pages = "2447-2458",
doi = "10.2298/TSCI200907341L"
}

Linić, S., Linić, M. S., Radojković, B., Ristić, S. S.,& Jegdić, B.. (2021). Turbulence recognition in free convective flow by thermal - video post -processing in the case of a thermal power plant mill. in Thermal Science
Serbia : Serbian Society of Heat Transfer Engineers., 25(4), 2447-2458.
https://doi.org/10.2298/TSCI200907341L

Linić S, Linić MS, Radojković B, Ristić SS, Jegdić B. Turbulence recognition in free convective flow by thermal - video post -processing in the case of a thermal power plant mill. in Thermal Science. 2021;25(4):2447-2458.
doi:10.2298/TSCI200907341L .

Linić, Suzana, Linić, Mihailo S., Radojković, Bojana, Ristić, Slavica S., Jegdić, Bore, "Turbulence recognition in free convective flow by thermal - video post -processing in the case of a thermal power plant mill" in Thermal Science, 25, no. 4 (2021):2447-2458,
https://doi.org/10.2298/TSCI200907341L . .

TY  - JOUR
AU  - Polić, Suzana R.
AU  - Ristić, Slavica
AU  - Radojković, Bojana M.
AU  - Linić, Suzana Lj.
PY  - 2020
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/5442
AB  - The removal of varnish is a very challenging task in the conservation of wooden artifacts. The results of experiments performed to investigate the suitability of lasers for cleaning aged varnish from bog oak wood (ebony) are presented in this paper. Optimal laser parameters for safe and efficient varnish ablation were determined in order to preserve the integrity of the original wooden substrate during the cleaning process. The ablation threshold for varnish and wood damage threshold was examined using Nd:YAG laser (1064, 532 and 355 nm) emitting pulses of nanosecond (8 ns) duration. Results of induced varnish removal and other morphological alterations to the wood surface were investigated by optical microscopy and colorimetry.
PB  - Scientific professional society for environmental protection of Serbia-ECOLOGICA
T2  - Ecologica
T1  - Laser cleaning of varnish from bog oak surface
VL  - 27
IS  - 100
SP  - 604
EP  - 609
UR  - https://hdl.handle.net/21.15107/rcub_cer_5442
ER  - 

@article{
author = "Polić, Suzana R. and Ristić, Slavica and Radojković, Bojana M. and Linić, Suzana Lj.",
year = "2020",
abstract = "The removal of varnish is a very challenging task in the conservation of wooden artifacts. The results of experiments performed to investigate the suitability of lasers for cleaning aged varnish from bog oak wood (ebony) are presented in this paper. Optimal laser parameters for safe and efficient varnish ablation were determined in order to preserve the integrity of the original wooden substrate during the cleaning process. The ablation threshold for varnish and wood damage threshold was examined using Nd:YAG laser (1064, 532 and 355 nm) emitting pulses of nanosecond (8 ns) duration. Results of induced varnish removal and other morphological alterations to the wood surface were investigated by optical microscopy and colorimetry.",
publisher = "Scientific professional society for environmental protection of Serbia-ECOLOGICA",
journal = "Ecologica",
title = "Laser cleaning of varnish from bog oak surface",
volume = "27",
number = "100",
pages = "604-609",
url = "https://hdl.handle.net/21.15107/rcub_cer_5442"
}

Polić, S. R., Ristić, S., Radojković, B. M.,& Linić, S. Lj.. (2020). Laser cleaning of varnish from bog oak surface. in Ecologica
Scientific professional society for environmental protection of Serbia-ECOLOGICA., 27(100), 604-609.
https://hdl.handle.net/21.15107/rcub_cer_5442

Polić SR, Ristić S, Radojković BM, Linić SL. Laser cleaning of varnish from bog oak surface. in Ecologica. 2020;27(100):604-609.
https://hdl.handle.net/21.15107/rcub_cer_5442 .

Polić, Suzana R., Ristić, Slavica, Radojković, Bojana M., Linić, Suzana Lj., "Laser cleaning of varnish from bog oak surface" in Ecologica, 27, no. 100 (2020):604-609,
https://hdl.handle.net/21.15107/rcub_cer_5442 .

TY  - CONF
AU  - Radojković, Bojana
AU  - Ristić, Slavica
AU  - Polić, Suzana R.
AU  - Linić, Suzana
PY  - 2020
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/4075
AB  - The  modern  military  industry  demands  the  most  innovative  and  high-quality  metals  and  alloys,  as  well  as 
processing technologies. Iron and its alloys are a common material used for different types of weapons and military 
equipment. Lasers have been widely used in the metal surface processing, but the changes that occur on laser treated metal 
surfaces have not yet been sufficiently investigated. A study of morphological and chemical changes on the metal surface 
induced by Nd:YAG laser treatment in ambient air is presented. A pulsed Nd:YAG laser (1064 nm, Gaussian spatial profile, 
FWHM  8 ns, energy up to 525 mJ, beam diameter of 1-10 mm and fluence up to 3.5 J/cm
2
) was used.  Micro-morphological 
analyses of sample surfaces before and after laser treatment process were performed by optical and SEM microscopies. 
EDX method was used for chemical analyses and Spectra colorimeter for investigation of induced color changes. The laser 
irradiation effects were studied as a function of two laser parameters, number of laser pulses and laser fluencies, around 
and over the damage threshold. The results show that there are significant differences depending on these laser parameters.
PB  - Belgrade : Military Technical Institute
C3  - Proceedings - 9th International Scientific Conference od Defensive Technologies OTEH 2020, Belgrade, 15-16 october 2020
T1  - Surface modification on iron induced by Nd:YAG pulsed laser treatment
VL  - 9
SP  - 369
EP  - 373
UR  - https://hdl.handle.net/21.15107/rcub_cer_4075
ER  - 

@conference{
author = "Radojković, Bojana and Ristić, Slavica and Polić, Suzana R. and Linić, Suzana",
year = "2020",
abstract = "The  modern  military  industry  demands  the  most  innovative  and  high-quality  metals  and  alloys,  as  well  as 
processing technologies. Iron and its alloys are a common material used for different types of weapons and military 
equipment. Lasers have been widely used in the metal surface processing, but the changes that occur on laser treated metal 
surfaces have not yet been sufficiently investigated. A study of morphological and chemical changes on the metal surface 
induced by Nd:YAG laser treatment in ambient air is presented. A pulsed Nd:YAG laser (1064 nm, Gaussian spatial profile, 
FWHM  8 ns, energy up to 525 mJ, beam diameter of 1-10 mm and fluence up to 3.5 J/cm
2
) was used.  Micro-morphological 
analyses of sample surfaces before and after laser treatment process were performed by optical and SEM microscopies. 
EDX method was used for chemical analyses and Spectra colorimeter for investigation of induced color changes. The laser 
irradiation effects were studied as a function of two laser parameters, number of laser pulses and laser fluencies, around 
and over the damage threshold. The results show that there are significant differences depending on these laser parameters.",
publisher = "Belgrade : Military Technical Institute",
journal = "Proceedings - 9th International Scientific Conference od Defensive Technologies OTEH 2020, Belgrade, 15-16 october 2020",
title = "Surface modification on iron induced by Nd:YAG pulsed laser treatment",
volume = "9",
pages = "369-373",
url = "https://hdl.handle.net/21.15107/rcub_cer_4075"
}

Radojković, B., Ristić, S., Polić, S. R.,& Linić, S.. (2020). Surface modification on iron induced by Nd:YAG pulsed laser treatment. in Proceedings - 9th International Scientific Conference od Defensive Technologies OTEH 2020, Belgrade, 15-16 october 2020
Belgrade : Military Technical Institute., 9, 369-373.
https://hdl.handle.net/21.15107/rcub_cer_4075

Radojković B, Ristić S, Polić SR, Linić S. Surface modification on iron induced by Nd:YAG pulsed laser treatment. in Proceedings - 9th International Scientific Conference od Defensive Technologies OTEH 2020, Belgrade, 15-16 october 2020. 2020;9:369-373.
https://hdl.handle.net/21.15107/rcub_cer_4075 .

Radojković, Bojana, Ristić, Slavica, Polić, Suzana R., Linić, Suzana, "Surface modification on iron induced by Nd:YAG pulsed laser treatment" in Proceedings - 9th International Scientific Conference od Defensive Technologies OTEH 2020, Belgrade, 15-16 october 2020, 9 (2020):369-373,
https://hdl.handle.net/21.15107/rcub_cer_4075 .

TY  - CHAP
AU  - Linić, Suzana
AU  - Lučanin, Vojkan
AU  - Živković, Srđan
AU  - Raković, Marko
AU  - Puharić, Mirjana
PY  - 2020
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/4056
AB  - In the times of significant development of high-speed train transportation and taking the primacy over the others. One of the major designing task is to predict accurately and fast the vehicle main performances, especially aerodinamics. Motivated by the bionic design of representative Japans train Shinkansen, the presented bionic design was based on the observations of the kingfisher from Serbian national heritage collection. The specimen beak shape has been measured by laser scanning, and converted to a mesh. Afterward, the longitudinal cross-section of the beak was implemented to a bionic high-speed train design. As the critical, the conditions of the trains forehead entering into the tunnel were selected, while the case scheme employed relative motion. The forehead contour distributions, obtained with computational fluid dynamics, were used for the prediction of the transition zone extension. The anomalies in surface temperature behavior were additionaly analyzed by pressure and density distribution inside the tunnel and over the forehead. Besides the gross time history of the pressure derivative of time is in correspondance with the referent, it was interpreted that the true biological form is not fully suitable for adoption for bionic design. The development of this design, employing contour simplification by the close parabolic function will continue in the future. This work suggests an ecconomic and efficient approach to analyze the results of the Reynolds-Averaged navier-Stokes equation adeqate for the concept design stage.
PB  - Springer
T2  - Lecture Notes in Networks and Systems - Experimental and Computational Investigations in Engineering
T1  - Experimental and Numerical Methods for Concept Design and Flow Transition Prediction on the Example of the Bionic High-speed Train
VL  - 153
SP  - 65
EP  - 82
DO  - 10.1007/978-3-030-58362-0_5
ER  - 

@inbook{
author = "Linić, Suzana and Lučanin, Vojkan and Živković, Srđan and Raković, Marko and Puharić, Mirjana",
year = "2020",
abstract = "In the times of significant development of high-speed train transportation and taking the primacy over the others. One of the major designing task is to predict accurately and fast the vehicle main performances, especially aerodinamics. Motivated by the bionic design of representative Japans train Shinkansen, the presented bionic design was based on the observations of the kingfisher from Serbian national heritage collection. The specimen beak shape has been measured by laser scanning, and converted to a mesh. Afterward, the longitudinal cross-section of the beak was implemented to a bionic high-speed train design. As the critical, the conditions of the trains forehead entering into the tunnel were selected, while the case scheme employed relative motion. The forehead contour distributions, obtained with computational fluid dynamics, were used for the prediction of the transition zone extension. The anomalies in surface temperature behavior were additionaly analyzed by pressure and density distribution inside the tunnel and over the forehead. Besides the gross time history of the pressure derivative of time is in correspondance with the referent, it was interpreted that the true biological form is not fully suitable for adoption for bionic design. The development of this design, employing contour simplification by the close parabolic function will continue in the future. This work suggests an ecconomic and efficient approach to analyze the results of the Reynolds-Averaged navier-Stokes equation adeqate for the concept design stage.",
publisher = "Springer",
journal = "Lecture Notes in Networks and Systems - Experimental and Computational Investigations in Engineering",
booktitle = "Experimental and Numerical Methods for Concept Design and Flow Transition Prediction on the Example of the Bionic High-speed Train",
volume = "153",
pages = "65-82",
doi = "10.1007/978-3-030-58362-0_5"
}

Linić, S., Lučanin, V., Živković, S., Raković, M.,& Puharić, M.. (2020). Experimental and Numerical Methods for Concept Design and Flow Transition Prediction on the Example of the Bionic High-speed Train. in Lecture Notes in Networks and Systems - Experimental and Computational Investigations in Engineering
Springer., 153, 65-82.
https://doi.org/10.1007/978-3-030-58362-0_5

Linić S, Lučanin V, Živković S, Raković M, Puharić M. Experimental and Numerical Methods for Concept Design and Flow Transition Prediction on the Example of the Bionic High-speed Train. in Lecture Notes in Networks and Systems - Experimental and Computational Investigations in Engineering. 2020;153:65-82.
doi:10.1007/978-3-030-58362-0_5 .

Linić, Suzana, Lučanin, Vojkan, Živković, Srđan, Raković, Marko, Puharić, Mirjana, "Experimental and Numerical Methods for Concept Design and Flow Transition Prediction on the Example of the Bionic High-speed Train" in Lecture Notes in Networks and Systems - Experimental and Computational Investigations in Engineering, 153 (2020):65-82,
https://doi.org/10.1007/978-3-030-58362-0_5 . .

TY  - JOUR
AU  - Jegdić, Bore
AU  - Bobić, Biljana
AU  - Linić, Suzana
PY  - 2020
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/3723
AB  - The paper analyses the corrosion behaviour of naturally and artificially aged
AA2024 alloy in NaCl solution and in the presence of an environment ‐ friendly
corrosion inhibitor, CeCl 3 . On the basis of the values of polarisation resistance
and  corrosion  current  density,  the  corrosion  resistance  of  the  protective
inhibitor film is established as well as the general corrosion resistance of this
aluminium  alloy.  Resistance  to  pit  formation  is  determined  based  on  the
difference in pitting and corrosion potentials while resistance to pit growth is
determined based on the amount of charge consumed during pit growth. A
scanning electron microscope is used to examine the morphology of the pits
formed during the pitting corrosion testing, as well as to determine the cerium
content on intermetallic particles and the matrix AA2024 alloy. The corrosion
behaviour of AA2024 alloy is investigated after different test periods in NaCl
solution  and  in  the  same  solution  with  the  CeCl 3 inhibitor.  The  corrosion
resistance of both tempers of AA2024 alloy is more than one order of magnitude
higher in the presence of CeCl 3 . An explanation of the observed differences in
the corrosion behaviour of the naturally and artificially aged AA2024 alloy is
proposed. Different corrosion behaviour of the alloy after different test periods
is also explained.
PB  - Wiley - VCH Verlag GmbH & Co
T2  - Materials and Corrosion
T1  - Corrosion behaviour of AA2024 aluminium alloy in different tempers in NaCl solution and with the CeCl3 corrosion inhibitor
VL  - 71
IS  - 3
SP  - 352
EP  - 364
DO  - 10.1002/maco.201911219
ER  - 

@article{
author = "Jegdić, Bore and Bobić, Biljana and Linić, Suzana",
year = "2020",
abstract = "The paper analyses the corrosion behaviour of naturally and artificially aged
AA2024 alloy in NaCl solution and in the presence of an environment ‐ friendly
corrosion inhibitor, CeCl 3 . On the basis of the values of polarisation resistance
and  corrosion  current  density,  the  corrosion  resistance  of  the  protective
inhibitor film is established as well as the general corrosion resistance of this
aluminium  alloy.  Resistance  to  pit  formation  is  determined  based  on  the
difference in pitting and corrosion potentials while resistance to pit growth is
determined based on the amount of charge consumed during pit growth. A
scanning electron microscope is used to examine the morphology of the pits
formed during the pitting corrosion testing, as well as to determine the cerium
content on intermetallic particles and the matrix AA2024 alloy. The corrosion
behaviour of AA2024 alloy is investigated after different test periods in NaCl
solution  and  in  the  same  solution  with  the  CeCl 3 inhibitor.  The  corrosion
resistance of both tempers of AA2024 alloy is more than one order of magnitude
higher in the presence of CeCl 3 . An explanation of the observed differences in
the corrosion behaviour of the naturally and artificially aged AA2024 alloy is
proposed. Different corrosion behaviour of the alloy after different test periods
is also explained.",
publisher = "Wiley - VCH Verlag GmbH & Co",
journal = "Materials and Corrosion",
title = "Corrosion behaviour of AA2024 aluminium alloy in different tempers in NaCl solution and with the CeCl3 corrosion inhibitor",
volume = "71",
number = "3",
pages = "352-364",
doi = "10.1002/maco.201911219"
}

Jegdić, B., Bobić, B.,& Linić, S.. (2020). Corrosion behaviour of AA2024 aluminium alloy in different tempers in NaCl solution and with the CeCl3 corrosion inhibitor. in Materials and Corrosion
Wiley - VCH Verlag GmbH & Co., 71(3), 352-364.
https://doi.org/10.1002/maco.201911219

Jegdić B, Bobić B, Linić S. Corrosion behaviour of AA2024 aluminium alloy in different tempers in NaCl solution and with the CeCl3 corrosion inhibitor. in Materials and Corrosion. 2020;71(3):352-364.
doi:10.1002/maco.201911219 .

Jegdić, Bore, Bobić, Biljana, Linić, Suzana, "Corrosion behaviour of AA2024 aluminium alloy in different tempers in NaCl solution and with the CeCl3 corrosion inhibitor" in Materials and Corrosion, 71, no. 3 (2020):352-364,
https://doi.org/10.1002/maco.201911219 . .

TY  - JOUR
AU  - Ristić, Slavica R.
AU  - Polić, Suzana R.
AU  - Knježević, Dragan M.
AU  - Radojković, Bojana
AU  - Linić, Suzana
AU  - Jegdić, Bore
PY  - 2019
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/3453
AB  - Inovativna tehnologija laserskog čišćenja različitih površina u industriji, uključuje integrisani pristup kontrole procesa interakcije laser-materijal i ispitivanja rezultata laserskog delovanja. Lasersko čišćenje ima značajne prednosti u odnosu na klasične metode čišćenja: ima veliku selektivnost, preciznost, efikasnost i pouzdanost u primeni kod različitih vrsta materijala. Termalna priroda procesa laserskog čišćenja unosi određeni rizik po predmete čišćenja, te su istraživanja optimizacije procesa u fokusu interesovanja velikog broja naučnika. U radu su prikazani rezultati laserskog čišćenja boje na bakarnoj površini i zaštitnog sloja na štampanoj pločici. Kontrola procesa laserskog čišćenja u realnom vremenu je vršena pomoću infracrvene kamere. Mikromorfološke promene čišćene površine su ispitivani optičkom mikroskopijom.
AB  - Innovative laser cleaning technology for various surfaces in the industry, includes an integrated
approach to controlling the process of laser-material interaction and testing laser treatment results.
Laser cleaning has significant advantages over conventional cleaning methods: it has high selectivity,
precision, efficiency and reliability in an application for different types of materials. The thermal nature
of the laser cleaning process brings a certain risk for cleaning objects, and the process optimization
research is in the focus of interest of a large number of scientists. This paper presents the results of laser
paint, on the copper surface, and the protective layer, on the printed circuit board, cleaning. The control
of the real-time laser cleaning process was carried out using an infrared camera. The
micromorphological characteristics of the cleaned surface were examined by optical microscopy
PB  - Beograd : Savez inženjera i tehničara Srbije
T2  - Tehnika
T1  - Termografija u kontroli efikasnosti i bezbednosti laserskog čišćenja
T1  - Thermography in control efficiency and safety of laser cleaning
VL  - 74
IS  - 5
SP  - 623
EP  - 629
DO  - 10.5937/tehnika1905623R
ER  - 

@article{
author = "Ristić, Slavica R. and Polić, Suzana R. and Knježević, Dragan M. and Radojković, Bojana and Linić, Suzana and Jegdić, Bore",
year = "2019",
abstract = "Inovativna tehnologija laserskog čišćenja različitih površina u industriji, uključuje integrisani pristup kontrole procesa interakcije laser-materijal i ispitivanja rezultata laserskog delovanja. Lasersko čišćenje ima značajne prednosti u odnosu na klasične metode čišćenja: ima veliku selektivnost, preciznost, efikasnost i pouzdanost u primeni kod različitih vrsta materijala. Termalna priroda procesa laserskog čišćenja unosi određeni rizik po predmete čišćenja, te su istraživanja optimizacije procesa u fokusu interesovanja velikog broja naučnika. U radu su prikazani rezultati laserskog čišćenja boje na bakarnoj površini i zaštitnog sloja na štampanoj pločici. Kontrola procesa laserskog čišćenja u realnom vremenu je vršena pomoću infracrvene kamere. Mikromorfološke promene čišćene površine su ispitivani optičkom mikroskopijom., Innovative laser cleaning technology for various surfaces in the industry, includes an integrated
approach to controlling the process of laser-material interaction and testing laser treatment results.
Laser cleaning has significant advantages over conventional cleaning methods: it has high selectivity,
precision, efficiency and reliability in an application for different types of materials. The thermal nature
of the laser cleaning process brings a certain risk for cleaning objects, and the process optimization
research is in the focus of interest of a large number of scientists. This paper presents the results of laser
paint, on the copper surface, and the protective layer, on the printed circuit board, cleaning. The control
of the real-time laser cleaning process was carried out using an infrared camera. The
micromorphological characteristics of the cleaned surface were examined by optical microscopy",
publisher = "Beograd : Savez inženjera i tehničara Srbije",
journal = "Tehnika",
title = "Termografija u kontroli efikasnosti i bezbednosti laserskog čišćenja, Thermography in control efficiency and safety of laser cleaning",
volume = "74",
number = "5",
pages = "623-629",
doi = "10.5937/tehnika1905623R"
}

Ristić, S. R., Polić, S. R., Knježević, D. M., Radojković, B., Linić, S.,& Jegdić, B.. (2019). Termografija u kontroli efikasnosti i bezbednosti laserskog čišćenja. in Tehnika
Beograd : Savez inženjera i tehničara Srbije., 74(5), 623-629.
https://doi.org/10.5937/tehnika1905623R

Ristić SR, Polić SR, Knježević DM, Radojković B, Linić S, Jegdić B. Termografija u kontroli efikasnosti i bezbednosti laserskog čišćenja. in Tehnika. 2019;74(5):623-629.
doi:10.5937/tehnika1905623R .

Ristić, Slavica R., Polić, Suzana R., Knježević, Dragan M., Radojković, Bojana, Linić, Suzana, Jegdić, Bore, "Termografija u kontroli efikasnosti i bezbednosti laserskog čišćenja" in Tehnika, 74, no. 5 (2019):623-629,
https://doi.org/10.5937/tehnika1905623R . .

TY  - CONF
AU  - Linić, Suzana Lj.
AU  - Radojković, Bojana M.
AU  - Ristić, Slavica
AU  - Vasović, Ivana V.
PY  - 2019
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/5444
AB  - The investigations of the turbulence in the flow are one of the most expensive, thus the improvement of existing ones and the research related to the new methods are in continual development. The multidisciplinary approach led to the application of the infrared thermography in the turbulent boundary layer observations with the endpoint goal of energy and cost savings in its early stages. This work presents the use of the industrial type infrared thermography for identification of the turbulent zones in the free convective flow, so far the less investigated problem related to convection heat transfer. It was shown that the transient spot temperature difference, measured on the complex geometry of the real-scale coal ventilation mill, of the Thermal plant “Kostolac B”, by an infrared camera, is a good parameter for identification of the most influenced positions by turbulence. The defined fields with maximal transient temperature difference are in accordance with theory and values calculated by numerical simulations for clean geometry, confirming the assumptions. The described method is also convenient for use in cases when the other methods are not applicable because of the complex geometry, unapproachable, or for the other similar reasons. The results from this work would support the more precise measurements with the research type infrared camera, the other methods for measurements.
PB  - Serbian Society of Mechanics
C3  - Proceedings - The 7th International congress of Serbian Society of Mechanics, 24.09-26/06, 2019, Sremski Karlovci
T1  - One method for ordering turbulence measuring places applied to free-convection flow around thermal plant coal mill
VL  - 7
SP  - p.M3g
UR  - https://hdl.handle.net/21.15107/rcub_cer_5444
ER  - 

@conference{
author = "Linić, Suzana Lj. and Radojković, Bojana M. and Ristić, Slavica and Vasović, Ivana V.",
year = "2019",
abstract = "The investigations of the turbulence in the flow are one of the most expensive, thus the improvement of existing ones and the research related to the new methods are in continual development. The multidisciplinary approach led to the application of the infrared thermography in the turbulent boundary layer observations with the endpoint goal of energy and cost savings in its early stages. This work presents the use of the industrial type infrared thermography for identification of the turbulent zones in the free convective flow, so far the less investigated problem related to convection heat transfer. It was shown that the transient spot temperature difference, measured on the complex geometry of the real-scale coal ventilation mill, of the Thermal plant “Kostolac B”, by an infrared camera, is a good parameter for identification of the most influenced positions by turbulence. The defined fields with maximal transient temperature difference are in accordance with theory and values calculated by numerical simulations for clean geometry, confirming the assumptions. The described method is also convenient for use in cases when the other methods are not applicable because of the complex geometry, unapproachable, or for the other similar reasons. The results from this work would support the more precise measurements with the research type infrared camera, the other methods for measurements.",
publisher = "Serbian Society of Mechanics",
journal = "Proceedings - The 7th International congress of Serbian Society of Mechanics, 24.09-26/06, 2019, Sremski Karlovci",
title = "One method for ordering turbulence measuring places applied to free-convection flow around thermal plant coal mill",
volume = "7",
pages = "p.M3g",
url = "https://hdl.handle.net/21.15107/rcub_cer_5444"
}

Linić, S. Lj., Radojković, B. M., Ristić, S.,& Vasović, I. V.. (2019). One method for ordering turbulence measuring places applied to free-convection flow around thermal plant coal mill. in Proceedings - The 7th International congress of Serbian Society of Mechanics, 24.09-26/06, 2019, Sremski Karlovci
Serbian Society of Mechanics., 7, p.M3g.
https://hdl.handle.net/21.15107/rcub_cer_5444

Linić SL, Radojković BM, Ristić S, Vasović IV. One method for ordering turbulence measuring places applied to free-convection flow around thermal plant coal mill. in Proceedings - The 7th International congress of Serbian Society of Mechanics, 24.09-26/06, 2019, Sremski Karlovci. 2019;7:p.M3g.
https://hdl.handle.net/21.15107/rcub_cer_5444 .

Linić, Suzana Lj., Radojković, Bojana M., Ristić, Slavica, Vasović, Ivana V., "One method for ordering turbulence measuring places applied to free-convection flow around thermal plant coal mill" in Proceedings - The 7th International congress of Serbian Society of Mechanics, 24.09-26/06, 2019, Sremski Karlovci, 7 (2019):p.M3g,
https://hdl.handle.net/21.15107/rcub_cer_5444 .

TY  - GEN
AU  - Radojković, Bojana
AU  - Ristić, Slavica
AU  - Polić, Suzana R.
AU  - Jegdić, Bore
AU  - Janićijević, Milovan
AU  - Linić, Suzana
PY  - 2018
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/5471
AB  - Ласерске технике су постале незамењиве у решавању најразличитијих конзерваторских проблема. Последњих тридесетак година користе се у процесу дијагностике стања, у процесу уклањања непожељних слојева, као и у санацији оштећења на предметима културног наслеђа.
Традиционалне методе чишћења у великом броју случајева имају делимичног успеха. Ласерско чишћење показује одређене предности као што су: велику селективност, прецизност, ефикасност и поузданост у примени код различитих врста материјала. Постоје и одређени ризици по предмете чишћења, те су истраживања оптимизације процеса у центру великог броја истраживања.
Суштина техничког решења је подизање степена безбедности ласерског чишћења артефаката непроцењиве вредности интеграцијом инфрацрвене термографије за континуални мониторинг расподеле температуре на површини објекта за време озрачавања ласером. Извршен је велики број експеримената, у примени ове технике када се чишћење врши Nd:YAG ласером, а добијени резултати показују да се применом инфрацрвене термографије могу елиминисати оштећења на основном материјалу, што је од посебног значаја код артефаката сложеног састава.
AB  - Laser techniques have become irreplaceable in solving a wide variety of conservation problems. For the last thirty years, lasers have been used in the diagnostic process, in the process of 
removing undesirable layers, as well as in repairing damages of cultural heritage objects. Because of the complexity of artifacts, traditional cleaning methods in many cases have partial success. Laser cleaning shows certain advantages such as: high selectivity, precision, efficiency and reliability in application in different types of materials. There are also certain risks for cleaning objects, and the studies of process optimization are the subject of a number researches. The essence of the technical solution is to raise the safety level of laser cleaning artifacts of priceless value by integrating infrared thermography for continuous monitoring of the temperature distribution on the surface of the object during laser irradiation. A large number of experiments with thermography monitoring during the Nd: YAG laser cleaning have been performed.The results show that the infrared thermography can eliminate damages to the base material, which is of particular importance in the complex artifacts.
PB  - Универзитет у Београду, Институт за хемију, технологију и металургију-институт од националног значаја за Републику Србију,
PB  - Централни институт за конзервацију Београд
T1  - Унапређење безбедности и технологије ласерског чишћења керамичких артефаката
UR  - https://hdl.handle.net/21.15107/rcub_cer_5471
ER  - 

@misc{
author = "Radojković, Bojana and Ristić, Slavica and Polić, Suzana R. and Jegdić, Bore and Janićijević, Milovan and Linić, Suzana",
year = "2018",
abstract = "Ласерске технике су постале незамењиве у решавању најразличитијих конзерваторских проблема. Последњих тридесетак година користе се у процесу дијагностике стања, у процесу уклањања непожељних слојева, као и у санацији оштећења на предметима културног наслеђа.
Традиционалне методе чишћења у великом броју случајева имају делимичног успеха. Ласерско чишћење показује одређене предности као што су: велику селективност, прецизност, ефикасност и поузданост у примени код различитих врста материјала. Постоје и одређени ризици по предмете чишћења, те су истраживања оптимизације процеса у центру великог броја истраживања.
Суштина техничког решења је подизање степена безбедности ласерског чишћења артефаката непроцењиве вредности интеграцијом инфрацрвене термографије за континуални мониторинг расподеле температуре на површини објекта за време озрачавања ласером. Извршен је велики број експеримената, у примени ове технике када се чишћење врши Nd:YAG ласером, а добијени резултати показују да се применом инфрацрвене термографије могу елиминисати оштећења на основном материјалу, што је од посебног значаја код артефаката сложеног састава., Laser techniques have become irreplaceable in solving a wide variety of conservation problems. For the last thirty years, lasers have been used in the diagnostic process, in the process of 
removing undesirable layers, as well as in repairing damages of cultural heritage objects. Because of the complexity of artifacts, traditional cleaning methods in many cases have partial success. Laser cleaning shows certain advantages such as: high selectivity, precision, efficiency and reliability in application in different types of materials. There are also certain risks for cleaning objects, and the studies of process optimization are the subject of a number researches. The essence of the technical solution is to raise the safety level of laser cleaning artifacts of priceless value by integrating infrared thermography for continuous monitoring of the temperature distribution on the surface of the object during laser irradiation. A large number of experiments with thermography monitoring during the Nd: YAG laser cleaning have been performed.The results show that the infrared thermography can eliminate damages to the base material, which is of particular importance in the complex artifacts.",
publisher = "Универзитет у Београду, Институт за хемију, технологију и металургију-институт од националног значаја за Републику Србију,, Централни институт за конзервацију Београд",
title = "Унапређење безбедности и технологије ласерског чишћења керамичких артефаката",
url = "https://hdl.handle.net/21.15107/rcub_cer_5471"
}

Radojković, B., Ristić, S., Polić, S. R., Jegdić, B., Janićijević, M.,& Linić, S.. (2018). Унапређење безбедности и технологије ласерског чишћења керамичких артефаката. 
Универзитет у Београду, Институт за хемију, технологију и металургију-институт од националног значаја за Републику Србију,..
https://hdl.handle.net/21.15107/rcub_cer_5471

Radojković B, Ristić S, Polić SR, Jegdić B, Janićijević M, Linić S. Унапређење безбедности и технологије ласерског чишћења керамичких артефаката. 2018;.
https://hdl.handle.net/21.15107/rcub_cer_5471 .

Radojković, Bojana, Ristić, Slavica, Polić, Suzana R., Jegdić, Bore, Janićijević, Milovan, Linić, Suzana, "Унапређење безбедности и технологије ласерског чишћења керамичких артефаката" (2018),
https://hdl.handle.net/21.15107/rcub_cer_5471 .

TY  - JOUR
AU  - Ristić, Slavica S.
AU  - Polić, Suzana R.
AU  - Radojković, Bojana
AU  - Linić, Suzana
AU  - Bikić, Vesna
AU  - Jegdić, Bore
AU  - Pavlović, Miloš
PY  - 2018
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/2280
AB  - The paper presents the results of laser cleaning of corrosive and other deposits on a metal archaeological artefact from the Danube. Nd: YAG laser, energy up to 750 mJ and wavelengths λ = 1064 nm and 532 nm is used. The cleaning efficiency was examined in the function of laser energy, wavelength, and number of pulses, i.e. the time of exposure and moist of the surface of the sample. The results of removal of unwanted layers from the surface of the artefact and morphological changes on the base material were examined by optical and scanning electronic microscopy (OM and SEM). Micro-chemical changes have been determined by energy dispersive X-ray analysis (EDX) and x-ray fluorescence spectrometry (XRF). It has been shown that λ = 532 nm has higher efficiency for cleaning this sample and that the surface moisture has very small influence on laser cleaning efficiency. Research carried out on the archaeological object from the Danube shows that the application of lasers in the cleaning of undesirable layers is very efficient, safe and environmentally friendly.
AB  - U radu su prikazani rezultati laserskog čišćenja korozivnih i drugih naslaga na metalnom arheološkom predmetu koji je nađen u Dunavu. Korišćen je Nd:YAG laser, energije do 750mJ i talasne dužine λ=1064nm i 532nm. Efikasnost čišćenja je ispitivana u funkciji energije lasera, talasne dužine, broja impulsa, odnosno vremena eksponiranja i vlažnosti površine uzorka. Rezultati skidanja nepoželjnih slojeva sa površine uzorka, kao i morfoloških promena na osnovnom materijalu, ispitivani su optičkom i skenirajućom elektronskom mikroskopijom ( OM i SEM), a ispitivanje mikrohemijskih promena izvršeno je pomoću energijske disperzione spektrometrijske analize (EDX) i rendgensko fluorescentnom spektroskopijom (XRF). Pokazano je da za čišćenje ovog uzorka veću efikasnost ima λ= 532nm i da je uticaj vlažnosti površine na efikasnost laserskog čišćenja veoma mali. Istraživanja obavljena na arheološkom uzorku iz Dunava, pokazuju da je primena lasera u čišćenju nepoželjnih slojeva veoma efikasna, bezbedna i ekološki prihvatljiva.
PB  - Belgrade, Serbia : Engineering Society for Corrosion
T2  - Zaštita materijala
T1  - Laser cleaning of the archaeological metal sample from the Danube
T1  - Istraživanje mogućnosti primene lasera u čišćenju arheoloških metalnih predmeta
VL  - 59
IS  - 3
SP  - 410
EP  - 421
DO  - 10.5937/zasmat1803410R
ER  - 

@article{
author = "Ristić, Slavica S. and Polić, Suzana R. and Radojković, Bojana and Linić, Suzana and Bikić, Vesna and Jegdić, Bore and Pavlović, Miloš",
year = "2018",
abstract = "The paper presents the results of laser cleaning of corrosive and other deposits on a metal archaeological artefact from the Danube. Nd: YAG laser, energy up to 750 mJ and wavelengths λ = 1064 nm and 532 nm is used. The cleaning efficiency was examined in the function of laser energy, wavelength, and number of pulses, i.e. the time of exposure and moist of the surface of the sample. The results of removal of unwanted layers from the surface of the artefact and morphological changes on the base material were examined by optical and scanning electronic microscopy (OM and SEM). Micro-chemical changes have been determined by energy dispersive X-ray analysis (EDX) and x-ray fluorescence spectrometry (XRF). It has been shown that λ = 532 nm has higher efficiency for cleaning this sample and that the surface moisture has very small influence on laser cleaning efficiency. Research carried out on the archaeological object from the Danube shows that the application of lasers in the cleaning of undesirable layers is very efficient, safe and environmentally friendly., U radu su prikazani rezultati laserskog čišćenja korozivnih i drugih naslaga na metalnom arheološkom predmetu koji je nađen u Dunavu. Korišćen je Nd:YAG laser, energije do 750mJ i talasne dužine λ=1064nm i 532nm. Efikasnost čišćenja je ispitivana u funkciji energije lasera, talasne dužine, broja impulsa, odnosno vremena eksponiranja i vlažnosti površine uzorka. Rezultati skidanja nepoželjnih slojeva sa površine uzorka, kao i morfoloških promena na osnovnom materijalu, ispitivani su optičkom i skenirajućom elektronskom mikroskopijom ( OM i SEM), a ispitivanje mikrohemijskih promena izvršeno je pomoću energijske disperzione spektrometrijske analize (EDX) i rendgensko fluorescentnom spektroskopijom (XRF). Pokazano je da za čišćenje ovog uzorka veću efikasnost ima λ= 532nm i da je uticaj vlažnosti površine na efikasnost laserskog čišćenja veoma mali. Istraživanja obavljena na arheološkom uzorku iz Dunava, pokazuju da je primena lasera u čišćenju nepoželjnih slojeva veoma efikasna, bezbedna i ekološki prihvatljiva.",
publisher = "Belgrade, Serbia : Engineering Society for Corrosion",
journal = "Zaštita materijala",
title = "Laser cleaning of the archaeological metal sample from the Danube, Istraživanje mogućnosti primene lasera u čišćenju arheoloških metalnih predmeta",
volume = "59",
number = "3",
pages = "410-421",
doi = "10.5937/zasmat1803410R"
}

Ristić, S. S., Polić, S. R., Radojković, B., Linić, S., Bikić, V., Jegdić, B.,& Pavlović, M.. (2018). Laser cleaning of the archaeological metal sample from the Danube. in Zaštita materijala
Belgrade, Serbia : Engineering Society for Corrosion., 59(3), 410-421.
https://doi.org/10.5937/zasmat1803410R

Ristić SS, Polić SR, Radojković B, Linić S, Bikić V, Jegdić B, Pavlović M. Laser cleaning of the archaeological metal sample from the Danube. in Zaštita materijala. 2018;59(3):410-421.
doi:10.5937/zasmat1803410R .

Ristić, Slavica S., Polić, Suzana R., Radojković, Bojana, Linić, Suzana, Bikić, Vesna, Jegdić, Bore, Pavlović, Miloš, "Laser cleaning of the archaeological metal sample from the Danube" in Zaštita materijala, 59, no. 3 (2018):410-421,
https://doi.org/10.5937/zasmat1803410R . .

TY  - JOUR
AU  - Linić, Suzana
AU  - Ocokoljić, Goran J.
AU  - Ristić, Slavica S.
AU  - Lučanin, Vojkan J.
AU  - Kozić, Mirko S.
AU  - Rašuo, Boško
AU  - Jegdić, Bore
PY  - 2018
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/2309
AB  - Methods of diagnosing aerodynamic characteristics are constantly developing in order to conduct the precise and energy efficient wind tunnel testing of transport vehicles in the prototype design early stages. This is of a special importance when facing the time/cost consumption problems of detection of the transition zone over the simplified design of the high-speed train. Herein the applied thermodynamics found a very significant role in the field of experimental aerodynamics. With the intention of detecting the boundary-layer transition zone the following measurements were applied: the infrared thermography, flow visualization, and drag force measurements. In addition, the CFD was applied to predict the flow behaviour and transition zone, solving PDE consisting of the Reynolds-averaged Navier-Stokes equations, energy equation, and the equation of state for an ideal gas employing density-based solver. The thermal imaging defined the transition zone by simple application, and fast recognition, while the transition bounds were defined in the analysis. The flow visualization confirmed thermography results and the method itself as favourable, especially in the most expensive early phases of redesigning for aerodynamically optimized and energy efficient solutions. The numerical method was confirmed by the experiments, resulting in acceptable differences in the definition of the transition zone. For a better understanding of the phenomenon, the overlapped implementation of the presented methods focused on forced convection showed as the best solution. Based on the experiences of this research, development of the additional equipment and adjustments will be introduced in the future experiments.
PB  - Belgrade : VINČA Institute of Nuclear Sciences
T2  - Thermal Science
T1  - Boundary-layer transition detection by thermography and numerical method around bionic train model in wind tunnel test
VL  - 22
IS  - 2
SP  - 1137
EP  - 1148
DO  - 10.2298/TSCI170619302L
ER  - 

@article{
author = "Linić, Suzana and Ocokoljić, Goran J. and Ristić, Slavica S. and Lučanin, Vojkan J. and Kozić, Mirko S. and Rašuo, Boško and Jegdić, Bore",
year = "2018",
abstract = "Methods of diagnosing aerodynamic characteristics are constantly developing in order to conduct the precise and energy efficient wind tunnel testing of transport vehicles in the prototype design early stages. This is of a special importance when facing the time/cost consumption problems of detection of the transition zone over the simplified design of the high-speed train. Herein the applied thermodynamics found a very significant role in the field of experimental aerodynamics. With the intention of detecting the boundary-layer transition zone the following measurements were applied: the infrared thermography, flow visualization, and drag force measurements. In addition, the CFD was applied to predict the flow behaviour and transition zone, solving PDE consisting of the Reynolds-averaged Navier-Stokes equations, energy equation, and the equation of state for an ideal gas employing density-based solver. The thermal imaging defined the transition zone by simple application, and fast recognition, while the transition bounds were defined in the analysis. The flow visualization confirmed thermography results and the method itself as favourable, especially in the most expensive early phases of redesigning for aerodynamically optimized and energy efficient solutions. The numerical method was confirmed by the experiments, resulting in acceptable differences in the definition of the transition zone. For a better understanding of the phenomenon, the overlapped implementation of the presented methods focused on forced convection showed as the best solution. Based on the experiences of this research, development of the additional equipment and adjustments will be introduced in the future experiments.",
publisher = "Belgrade : VINČA Institute of Nuclear Sciences",
journal = "Thermal Science",
title = "Boundary-layer transition detection by thermography and numerical method around bionic train model in wind tunnel test",
volume = "22",
number = "2",
pages = "1137-1148",
doi = "10.2298/TSCI170619302L"
}

Linić, S., Ocokoljić, G. J., Ristić, S. S., Lučanin, V. J., Kozić, M. S., Rašuo, B.,& Jegdić, B.. (2018). Boundary-layer transition detection by thermography and numerical method around bionic train model in wind tunnel test. in Thermal Science
Belgrade : VINČA Institute of Nuclear Sciences., 22(2), 1137-1148.
https://doi.org/10.2298/TSCI170619302L

Linić S, Ocokoljić GJ, Ristić SS, Lučanin VJ, Kozić MS, Rašuo B, Jegdić B. Boundary-layer transition detection by thermography and numerical method around bionic train model in wind tunnel test. in Thermal Science. 2018;22(2):1137-1148.
doi:10.2298/TSCI170619302L .

Linić, Suzana, Ocokoljić, Goran J., Ristić, Slavica S., Lučanin, Vojkan J., Kozić, Mirko S., Rašuo, Boško, Jegdić, Bore, "Boundary-layer transition detection by thermography and numerical method around bionic train model in wind tunnel test" in Thermal Science, 22, no. 2 (2018):1137-1148,
https://doi.org/10.2298/TSCI170619302L . .

TY  - JOUR
AU  - Kozić, M.
AU  - Ristić, Slavica S.
AU  - Katavic, B.
AU  - Jegdić, Bore
AU  - Prvulović, M.
AU  - Prokolab, M.
AU  - Linić, Suzana
PY  - 2017
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/2216
AB  - Numerical simulation of 3D multiphase flow is performed to determine the velocity field in the fan mill. The mixture model of the Euler-Euler approach is used. Recirculating gas is a primary phase that carries granular phases including the coal powder and sand. The latter causes heavy wear of mill impact plates. The optimal form of hardfacing geometry and technology has an impact both on velocity magnitude and direction of flow in such a way as to reduce plate wear. This paper presents results of surface modification (based on numerical simulation), implemented on impact plates of the fan mill in the Kostolac B power plant in Serbia. Fishbone hardfacing is made in order to increase the lifetime of impact plates and extend the period between overhauls of fan mills. The experimental tests of fishbone surfacing plates, in exploitation conditions, show that the applied modification, hardfacing technologies and coating materials, give expected results. The application of this hardfacing in the form of a fishbone is simpler, faster and more economical compared to complete overlaying and honeycomb impact plate surfacing. The relative weight loss of base plate after an 1440-hour period of exploitation is 8%, while the weight losses for the hard-faced plate is below 7%.
PB  - Society for Structural Integrity and Life, Institute for Material Testing
T2  - Structural Integrity and Life
T1  - Wear resistance improvement of thermal plant fan mill impact plates based on numerical flow simulation
VL  - 17
IS  - 3
SP  - 221
EP  - 228
UR  - https://hdl.handle.net/21.15107/rcub_cer_2216
ER  - 

@article{
author = "Kozić, M. and Ristić, Slavica S. and Katavic, B. and Jegdić, Bore and Prvulović, M. and Prokolab, M. and Linić, Suzana",
year = "2017",
abstract = "Numerical simulation of 3D multiphase flow is performed to determine the velocity field in the fan mill. The mixture model of the Euler-Euler approach is used. Recirculating gas is a primary phase that carries granular phases including the coal powder and sand. The latter causes heavy wear of mill impact plates. The optimal form of hardfacing geometry and technology has an impact both on velocity magnitude and direction of flow in such a way as to reduce plate wear. This paper presents results of surface modification (based on numerical simulation), implemented on impact plates of the fan mill in the Kostolac B power plant in Serbia. Fishbone hardfacing is made in order to increase the lifetime of impact plates and extend the period between overhauls of fan mills. The experimental tests of fishbone surfacing plates, in exploitation conditions, show that the applied modification, hardfacing technologies and coating materials, give expected results. The application of this hardfacing in the form of a fishbone is simpler, faster and more economical compared to complete overlaying and honeycomb impact plate surfacing. The relative weight loss of base plate after an 1440-hour period of exploitation is 8%, while the weight losses for the hard-faced plate is below 7%.",
publisher = "Society for Structural Integrity and Life, Institute for Material Testing",
journal = "Structural Integrity and Life",
title = "Wear resistance improvement of thermal plant fan mill impact plates based on numerical flow simulation",
volume = "17",
number = "3",
pages = "221-228",
url = "https://hdl.handle.net/21.15107/rcub_cer_2216"
}

Kozić, M., Ristić, S. S., Katavic, B., Jegdić, B., Prvulović, M., Prokolab, M.,& Linić, S.. (2017). Wear resistance improvement of thermal plant fan mill impact plates based on numerical flow simulation. in Structural Integrity and Life
Society for Structural Integrity and Life, Institute for Material Testing., 17(3), 221-228.
https://hdl.handle.net/21.15107/rcub_cer_2216

Kozić M, Ristić SS, Katavic B, Jegdić B, Prvulović M, Prokolab M, Linić S. Wear resistance improvement of thermal plant fan mill impact plates based on numerical flow simulation. in Structural Integrity and Life. 2017;17(3):221-228.
https://hdl.handle.net/21.15107/rcub_cer_2216 .

Kozić, M., Ristić, Slavica S., Katavic, B., Jegdić, Bore, Prvulović, M., Prokolab, M., Linić, Suzana, "Wear resistance improvement of thermal plant fan mill impact plates based on numerical flow simulation" in Structural Integrity and Life, 17, no. 3 (2017):221-228,
https://hdl.handle.net/21.15107/rcub_cer_2216 .