Miličević, Dejan

Link to this page

Authority KeyName Variants
orcid::0000-0001-7746-0708
  • Miličević, Dejan (3)
  • Milicevic, Dejan S (2)
Projects

Author's Bibliography

Improvement of the epoxy coating properties by incorporation of polyaniline surface treated TiO2 nanoparticles previously modified with vitamin B6

Radoman, Tijana S; Džunuzović, Jasna; Grgur, Branimir N.; Gvozdenović, Milica M.; Jugović, Branimir; Milicevic, Dejan S; Džunuzović, Enis S.

(Elsevier Science Sa, Lausanne, 2016)

TY  - JOUR
AU  - Radoman, Tijana S
AU  - Džunuzović, Jasna
AU  - Grgur, Branimir N.
AU  - Gvozdenović, Milica M.
AU  - Jugović, Branimir
AU  - Milicevic, Dejan S
AU  - Džunuzović, Enis S.
PY  - 2016
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/1915
AB  - Novel TiO2-PANI core-shell nanocomposite, prepared by in situ oxidative polymerization of aniline in the presence of TiO2 nanoparticles surface modified with vitamin B6, was used to reinforce epoxy resin. The size of prepared TiO2 nanoparticles and TiO2-PANI nanocomposite were determined by a transmission electron microscopy (TEM). The surface modification of TiO2 nanoparticles was confirmed by FTIR and UV-vis spectroscopy, while the morphology of PANI and TiO2-PANI nanocomposite was investigated by scanning electron microscopy (SEM). The influence of TiO2-PANI nanocomposite on glass transition temperature, dielectric and dynamic mechanical properties, thermooxidative stability, mechanical and anticorrosion properties of epoxy based nanocomposites was investigated and compared to the properties of epoxy/PANI nanocomposites. It has been observed that the glass transition temperature of epoxy resin increases after introduction of PANI and TiO2-PANI nanocomposite, as well as with increasing their content. Prepared nanocomposites exhibited higher value of dielectric constant than pure epoxy resin. Epoxy based coating containing TiO2-PANI nanocomposite showed lower dielectric loss, higher hardness and better anticorrosion properties than pure epoxy resin and epoxy/PANI nanocomposite.
PB  - Elsevier Science Sa, Lausanne
T2  - Progress in Organic Coatings
T1  - Improvement of the epoxy coating properties by incorporation of polyaniline surface treated TiO2 nanoparticles previously modified with vitamin B6
VL  - 99
SP  - 346
EP  - 355
DO  - 10.1016/j.porgcoat.2016.06.014
ER  - 
@article{
author = "Radoman, Tijana S and Džunuzović, Jasna and Grgur, Branimir N. and Gvozdenović, Milica M. and Jugović, Branimir and Milicevic, Dejan S and Džunuzović, Enis S.",
year = "2016",
abstract = "Novel TiO2-PANI core-shell nanocomposite, prepared by in situ oxidative polymerization of aniline in the presence of TiO2 nanoparticles surface modified with vitamin B6, was used to reinforce epoxy resin. The size of prepared TiO2 nanoparticles and TiO2-PANI nanocomposite were determined by a transmission electron microscopy (TEM). The surface modification of TiO2 nanoparticles was confirmed by FTIR and UV-vis spectroscopy, while the morphology of PANI and TiO2-PANI nanocomposite was investigated by scanning electron microscopy (SEM). The influence of TiO2-PANI nanocomposite on glass transition temperature, dielectric and dynamic mechanical properties, thermooxidative stability, mechanical and anticorrosion properties of epoxy based nanocomposites was investigated and compared to the properties of epoxy/PANI nanocomposites. It has been observed that the glass transition temperature of epoxy resin increases after introduction of PANI and TiO2-PANI nanocomposite, as well as with increasing their content. Prepared nanocomposites exhibited higher value of dielectric constant than pure epoxy resin. Epoxy based coating containing TiO2-PANI nanocomposite showed lower dielectric loss, higher hardness and better anticorrosion properties than pure epoxy resin and epoxy/PANI nanocomposite.",
publisher = "Elsevier Science Sa, Lausanne",
journal = "Progress in Organic Coatings",
title = "Improvement of the epoxy coating properties by incorporation of polyaniline surface treated TiO2 nanoparticles previously modified with vitamin B6",
volume = "99",
pages = "346-355",
doi = "10.1016/j.porgcoat.2016.06.014"
}
Radoman, T. S., Džunuzović, J., Grgur, B. N., Gvozdenović, M. M., Jugović, B., Milicevic, D. S.,& Džunuzović, E. S.. (2016). Improvement of the epoxy coating properties by incorporation of polyaniline surface treated TiO2 nanoparticles previously modified with vitamin B6. in Progress in Organic Coatings
Elsevier Science Sa, Lausanne., 99, 346-355.
https://doi.org/10.1016/j.porgcoat.2016.06.014
Radoman TS, Džunuzović J, Grgur BN, Gvozdenović MM, Jugović B, Milicevic DS, Džunuzović ES. Improvement of the epoxy coating properties by incorporation of polyaniline surface treated TiO2 nanoparticles previously modified with vitamin B6. in Progress in Organic Coatings. 2016;99:346-355.
doi:10.1016/j.porgcoat.2016.06.014 .
Radoman, Tijana S, Džunuzović, Jasna, Grgur, Branimir N., Gvozdenović, Milica M., Jugović, Branimir, Milicevic, Dejan S, Džunuzović, Enis S., "Improvement of the epoxy coating properties by incorporation of polyaniline surface treated TiO2 nanoparticles previously modified with vitamin B6" in Progress in Organic Coatings, 99 (2016):346-355,
https://doi.org/10.1016/j.porgcoat.2016.06.014 . .
26
18
28

Improvement of epoxy resin properties by incorporation of TiO2 nanoparticles surface modified with gallic acid esters

Radoman, Tijana S; Džunuzović, Jasna; Jeremić, Katarina B.; Grgur, Branimir N.; Milicevic, Dejan S; Popović, Ivanka G.; Džunuzović, Enis S.

(Elsevier Sci Ltd, Oxford, 2014)

TY  - JOUR
AU  - Radoman, Tijana S
AU  - Džunuzović, Jasna
AU  - Jeremić, Katarina B.
AU  - Grgur, Branimir N.
AU  - Milicevic, Dejan S
AU  - Popović, Ivanka G.
AU  - Džunuzović, Enis S.
PY  - 2014
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/1552
AB  - Epoxy resin/titanium dioxide (epoxy/TiO2) nanocomposites were obtained by incorporation of TiO2 nanoparticles surface modified with gallic acid esters in epoxy resin. TiO2 nanoparticles were obtained by acid catalyzed hydrolysis of titanium isopropoxide and their structural characterization was performed by X-ray diffraction and transmission electron microscopy. Three gallic acid esters, having different hydrophobic part, were used for surface modification of the synthesized TiO2 nanoparticles: propyl, hexyl and lauryl gallate. The gallate chemisorption onto surface of TiO2 nanoparticles was confirmed by Fourier transform infrared and ultraviolet-visible spectroscopy, while the amount of surface-bonded gallates was determined using thermogravimetric analysis. The influence of the surface modified TiO2 nanoparticles, as well as the length of hydrophobic part of the gallate used for surface modification of TiO2 nanoparticles, on glass transition temperature, barrier, dielectric and anticorrosive properties of epoxy resin was investigated by differential scanning calorimetry, water vapor transmission test, dielectric spectroscopy, electrochemical impedance spectroscopy and polarization measurements. Incorporation of surface modified TiO2 nanoparticles in epoxy resin caused increase of glass transition temperature and decrease of the water vapor permeability of epoxy resin. The water vapor transmission rate of epoxy/TiO2 nanocomposites was reduced with increasing hydrophobic part chain length of gallate ligand. Dielectric constant of examined nanocomposites was influenced by gallate used for the modification of TiO2 nanoparticles. The nanocomposites have better anticorrosive properties than pure epoxy resin, because the surface modified TiO2 nanoparticles react as oxygen scavengers, which inhibit steel corrosion by cathodic mechanism.
PB  - Elsevier Sci Ltd, Oxford
T2  - Materials & Design
T1  - Improvement of epoxy resin properties by incorporation of TiO2 nanoparticles surface modified with gallic acid esters
VL  - 62
SP  - 158
EP  - 167
DO  - 10.1016/j.matdes.2014.05.015
ER  - 
@article{
author = "Radoman, Tijana S and Džunuzović, Jasna and Jeremić, Katarina B. and Grgur, Branimir N. and Milicevic, Dejan S and Popović, Ivanka G. and Džunuzović, Enis S.",
year = "2014",
abstract = "Epoxy resin/titanium dioxide (epoxy/TiO2) nanocomposites were obtained by incorporation of TiO2 nanoparticles surface modified with gallic acid esters in epoxy resin. TiO2 nanoparticles were obtained by acid catalyzed hydrolysis of titanium isopropoxide and their structural characterization was performed by X-ray diffraction and transmission electron microscopy. Three gallic acid esters, having different hydrophobic part, were used for surface modification of the synthesized TiO2 nanoparticles: propyl, hexyl and lauryl gallate. The gallate chemisorption onto surface of TiO2 nanoparticles was confirmed by Fourier transform infrared and ultraviolet-visible spectroscopy, while the amount of surface-bonded gallates was determined using thermogravimetric analysis. The influence of the surface modified TiO2 nanoparticles, as well as the length of hydrophobic part of the gallate used for surface modification of TiO2 nanoparticles, on glass transition temperature, barrier, dielectric and anticorrosive properties of epoxy resin was investigated by differential scanning calorimetry, water vapor transmission test, dielectric spectroscopy, electrochemical impedance spectroscopy and polarization measurements. Incorporation of surface modified TiO2 nanoparticles in epoxy resin caused increase of glass transition temperature and decrease of the water vapor permeability of epoxy resin. The water vapor transmission rate of epoxy/TiO2 nanocomposites was reduced with increasing hydrophobic part chain length of gallate ligand. Dielectric constant of examined nanocomposites was influenced by gallate used for the modification of TiO2 nanoparticles. The nanocomposites have better anticorrosive properties than pure epoxy resin, because the surface modified TiO2 nanoparticles react as oxygen scavengers, which inhibit steel corrosion by cathodic mechanism.",
publisher = "Elsevier Sci Ltd, Oxford",
journal = "Materials & Design",
title = "Improvement of epoxy resin properties by incorporation of TiO2 nanoparticles surface modified with gallic acid esters",
volume = "62",
pages = "158-167",
doi = "10.1016/j.matdes.2014.05.015"
}
Radoman, T. S., Džunuzović, J., Jeremić, K. B., Grgur, B. N., Milicevic, D. S., Popović, I. G.,& Džunuzović, E. S.. (2014). Improvement of epoxy resin properties by incorporation of TiO2 nanoparticles surface modified with gallic acid esters. in Materials & Design
Elsevier Sci Ltd, Oxford., 62, 158-167.
https://doi.org/10.1016/j.matdes.2014.05.015
Radoman TS, Džunuzović J, Jeremić KB, Grgur BN, Milicevic DS, Popović IG, Džunuzović ES. Improvement of epoxy resin properties by incorporation of TiO2 nanoparticles surface modified with gallic acid esters. in Materials & Design. 2014;62:158-167.
doi:10.1016/j.matdes.2014.05.015 .
Radoman, Tijana S, Džunuzović, Jasna, Jeremić, Katarina B., Grgur, Branimir N., Milicevic, Dejan S, Popović, Ivanka G., Džunuzović, Enis S., "Improvement of epoxy resin properties by incorporation of TiO2 nanoparticles surface modified with gallic acid esters" in Materials & Design, 62 (2014):158-167,
https://doi.org/10.1016/j.matdes.2014.05.015 . .
1
111
82
114

Uticaj starenja na morfološke i optičke karakteristike tankih filmova

Trifunović, Saša; Miličević, Dejan; Mićić, Maja; Mudrinić, Tihana; Suljovrujić, Edin

(Association of Chemical Engineers of Serbia, 2011)

TY  - JOUR
AU  - Trifunović, Saša
AU  - Miličević, Dejan
AU  - Mićić, Maja
AU  - Mudrinić, Tihana
AU  - Suljovrujić, Edin
PY  - 2011
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/7024
AB  - U ovom radu ispitivan je uticaj prirodnog starenja na morfološke i optičke karakteristikeTPD (N,N’-bis(3-metilfenil)-N,N’-difenilbenzidin) tankih filmova. Inicijalno, filmovi su pripremljeni fizičkom vakuumskom depozicijom pare, sa kosinusnom raspodelom debljine duž monokristalne SiO2 podloge. Morfologija tankih filmova proučavana je optičkom (OM) i „atomic force“ (AFM) mikroskopijom. Prostorno korelisana morfološka (AFM i OM) i optička (apsorbanca i fotoluminescencija) merenja primenjena su za određivanje uzajamne veze optičkih osobina i različitih morfologija filma. Promene u apsorpcionim i fotoluminescentnim spektrima čvrsto su povezane sa promenama u mikrostrukturi nastalim starenjem filmova. Bez obzira na morfološke i razlike u debljini filma (za dva reda veličine) svi filmovi neposredno nakon deponovanja pokazuju amorfno uređenje. Odležavanjem ovih filmova u normalnim atmosferskim uslovima (prirodno starenje) uočavaju se kako morfološke tako i promene u optičkim osobinama izazvane kristalizacijom. Svojstvo amorfnih TPD filmova da kristališu je takođe potvrđeno i diferencijalnom skanirajućom kalorimetrijom (DSC). Svi rezultati ukazuju na ograničenu mogućnost upotrebe TPD filmova u organskim elektroluminescentnim uređajima.
AB  - This paper presents the influence of ageing on the morphological and optical properties of TPD (N,N’-bis(3-methylphenil)-N,N’- diphenylbenzidine) thin films. Understanding of the nucleation mechanism and growth dynamics of molecular thin films is pivotal for controlling their morphology and the film interfacial properties, while the influence of ageing is essential for the potential commercial utilization. Initially, thin films were prepared using a combinatorial physical vapour deposition (CPVD) method, following a cosine-like distribution profile of thickness along monocrystal silica substrate. Morphology of thin films was investigated by using optical (OM) and atomic force microscopy (AFM). The link between optical properties and the resulting thin film morphology was made by spatially correlated morphological (AFM and OM) and optical (absorption and photoluminescence) measurements. The changes in the absorption and photoluminescence spectra are strongly connected to the ageing-induced changes in the microstructure of thin films. Regardless of morphological and differences in the film thickness (two orders of magnitude), all films show amorphous arrangement just after the deposition. Ageing of these films in regular atmosphere conditions results in morphological and changes in optical properties induced by the crystallization. The crystallization of initially amorphous samples was also confirmed by the differentional scanning calorimetry (DSC) measurements. All results indicate the limited possibility of using TPD films in organic electroluminescent devices.
PB  - Association of Chemical Engineers of Serbia
T2  - Hemijska industrija
T1  - Uticaj starenja na morfološke i optičke karakteristike tankih filmova
T1  - The Influence of Ageing on the Morphological and Optical Properties of Thin Tpd Films
VL  - 65
IS  - 1
SP  - 9
EP  - 13
DO  - 10.2298/HEMIND100519062T
ER  - 
@article{
author = "Trifunović, Saša and Miličević, Dejan and Mićić, Maja and Mudrinić, Tihana and Suljovrujić, Edin",
year = "2011",
abstract = "U ovom radu ispitivan je uticaj prirodnog starenja na morfološke i optičke karakteristikeTPD (N,N’-bis(3-metilfenil)-N,N’-difenilbenzidin) tankih filmova. Inicijalno, filmovi su pripremljeni fizičkom vakuumskom depozicijom pare, sa kosinusnom raspodelom debljine duž monokristalne SiO2 podloge. Morfologija tankih filmova proučavana je optičkom (OM) i „atomic force“ (AFM) mikroskopijom. Prostorno korelisana morfološka (AFM i OM) i optička (apsorbanca i fotoluminescencija) merenja primenjena su za određivanje uzajamne veze optičkih osobina i različitih morfologija filma. Promene u apsorpcionim i fotoluminescentnim spektrima čvrsto su povezane sa promenama u mikrostrukturi nastalim starenjem filmova. Bez obzira na morfološke i razlike u debljini filma (za dva reda veličine) svi filmovi neposredno nakon deponovanja pokazuju amorfno uređenje. Odležavanjem ovih filmova u normalnim atmosferskim uslovima (prirodno starenje) uočavaju se kako morfološke tako i promene u optičkim osobinama izazvane kristalizacijom. Svojstvo amorfnih TPD filmova da kristališu je takođe potvrđeno i diferencijalnom skanirajućom kalorimetrijom (DSC). Svi rezultati ukazuju na ograničenu mogućnost upotrebe TPD filmova u organskim elektroluminescentnim uređajima., This paper presents the influence of ageing on the morphological and optical properties of TPD (N,N’-bis(3-methylphenil)-N,N’- diphenylbenzidine) thin films. Understanding of the nucleation mechanism and growth dynamics of molecular thin films is pivotal for controlling their morphology and the film interfacial properties, while the influence of ageing is essential for the potential commercial utilization. Initially, thin films were prepared using a combinatorial physical vapour deposition (CPVD) method, following a cosine-like distribution profile of thickness along monocrystal silica substrate. Morphology of thin films was investigated by using optical (OM) and atomic force microscopy (AFM). The link between optical properties and the resulting thin film morphology was made by spatially correlated morphological (AFM and OM) and optical (absorption and photoluminescence) measurements. The changes in the absorption and photoluminescence spectra are strongly connected to the ageing-induced changes in the microstructure of thin films. Regardless of morphological and differences in the film thickness (two orders of magnitude), all films show amorphous arrangement just after the deposition. Ageing of these films in regular atmosphere conditions results in morphological and changes in optical properties induced by the crystallization. The crystallization of initially amorphous samples was also confirmed by the differentional scanning calorimetry (DSC) measurements. All results indicate the limited possibility of using TPD films in organic electroluminescent devices.",
publisher = "Association of Chemical Engineers of Serbia",
journal = "Hemijska industrija",
title = "Uticaj starenja na morfološke i optičke karakteristike tankih filmova, The Influence of Ageing on the Morphological and Optical Properties of Thin Tpd Films",
volume = "65",
number = "1",
pages = "9-13",
doi = "10.2298/HEMIND100519062T"
}
Trifunović, S., Miličević, D., Mićić, M., Mudrinić, T.,& Suljovrujić, E.. (2011). Uticaj starenja na morfološke i optičke karakteristike tankih filmova. in Hemijska industrija
Association of Chemical Engineers of Serbia., 65(1), 9-13.
https://doi.org/10.2298/HEMIND100519062T
Trifunović S, Miličević D, Mićić M, Mudrinić T, Suljovrujić E. Uticaj starenja na morfološke i optičke karakteristike tankih filmova. in Hemijska industrija. 2011;65(1):9-13.
doi:10.2298/HEMIND100519062T .
Trifunović, Saša, Miličević, Dejan, Mićić, Maja, Mudrinić, Tihana, Suljovrujić, Edin, "Uticaj starenja na morfološke i optičke karakteristike tankih filmova" in Hemijska industrija, 65, no. 1 (2011):9-13,
https://doi.org/10.2298/HEMIND100519062T . .

Uticaj gama zračenja na molekulsku masu i staklasti prelaz PLLA

Miličević, Dejan; Trifunović, Saša; Mudrinić, Tihana; Leskovac, Andreja; Ignjatović, Nenad; Dojčilović, Jablan; Suljovrujić, Edin

(Association of Chemical Engineers of Serbia, 2010)

TY  - JOUR
AU  - Miličević, Dejan
AU  - Trifunović, Saša
AU  - Mudrinić, Tihana
AU  - Leskovac, Andreja
AU  - Ignjatović, Nenad
AU  - Dojčilović, Jablan
AU  - Suljovrujić, Edin
PY  - 2010
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/7023
AB  - U ovom radu ispitivan je uticaj gama zračenja na molekulsku masu i staklasti prelaz poli-L-laktida (PLLA). S obzirom da je PLLA pri izlaganju visokoenergijskom zračenju sklon kidanju lanaca i velikoj degradaciji, promene u molekulskoj masi su određene primenom gel propusne hromatografije (GPC). Radijaciono-indukovane promene u staklastom prelazu su ispitane pomoću diferencijalno skenirajuće kalorimetrije (DSC). Prividna aktivaciona energija za staklasti prelaz, ΔH*, određena je na osnovu zavisnosti temperature staklastog prelaza, Tg, od brzine zagrevanja. Kidanje lanaca, uzrokovano zračenjem, glavni je razlog opadanja Tg i ΔH* sa apsorbovanom dozom. Izazvane promene u molekulskoj masi i temperaturi staklastog prelaza odigravaju se na predvidljiv i prilično precizan način. Stoga, gama zračenje može biti korišćeno nesamo za sterilizaciju nego i za dobijanje ovog biomaterijala poželjnih karakteristika.
AB  - The influence of gamma radiation on the structure and glass transition behaviour of poly-L-lactide (PLLA) has been studied. Since PLLA exposed to high-energy radiation in the presence of air is prone to chain scission reactions and large degradation, changes in molecular weight were obtained by the gel permeation chromatography (GPC). Alterations in the glass transition behaviour were investigated by differential scanning calorimetry (DSC). The apparent activation energy, ΔH*, for the glass transition was determined on the basis of the heating rate dependence of the glass transition temperature, Tg. Our findings support the fact that chain scission is the main reason for the decrease of Tg and ΔH* with the absorbed dose. At low doses, despite large changes in molecular weight, only small alterations are observed in the glass transition temperature and apparent activation energy. Further increase in the absorbed dose introduces not only significant changes in the molecular weight but also in the glass transition temperature and the activation energy. Such glass transition behavior is a manifestation of a well-known effect of molecular weight on Tg, postulated by the Fox–Flory equation. However, all the observed alterations are small and tolerable at absorbed doses required for sterilization (up to 25 kGy in most circumstances). Furthermore, this study reveals that the radiation-induced changes in the molecular weight and the glass transition temperature occur in a predictable and fairly accurate manner. Therefore, gamma radiation can be used not only for sterilization but also for tailoring desirable end-use properties of PLLA based implants.
PB  - Association of Chemical Engineers of Serbia
T2  - Hemijska industrija
T1  - Uticaj gama zračenja na molekulsku masu i staklasti prelaz PLLA
T1  - The Structure and Glass Transition Behaviour of PLLA under the Influence of Gamma Radiation
VL  - 64
IS  - 4
SP  - 275
EP  - 281
DO  - 10.2298/HEMIND100329020M
ER  - 
@article{
author = "Miličević, Dejan and Trifunović, Saša and Mudrinić, Tihana and Leskovac, Andreja and Ignjatović, Nenad and Dojčilović, Jablan and Suljovrujić, Edin",
year = "2010",
abstract = "U ovom radu ispitivan je uticaj gama zračenja na molekulsku masu i staklasti prelaz poli-L-laktida (PLLA). S obzirom da je PLLA pri izlaganju visokoenergijskom zračenju sklon kidanju lanaca i velikoj degradaciji, promene u molekulskoj masi su određene primenom gel propusne hromatografije (GPC). Radijaciono-indukovane promene u staklastom prelazu su ispitane pomoću diferencijalno skenirajuće kalorimetrije (DSC). Prividna aktivaciona energija za staklasti prelaz, ΔH*, određena je na osnovu zavisnosti temperature staklastog prelaza, Tg, od brzine zagrevanja. Kidanje lanaca, uzrokovano zračenjem, glavni je razlog opadanja Tg i ΔH* sa apsorbovanom dozom. Izazvane promene u molekulskoj masi i temperaturi staklastog prelaza odigravaju se na predvidljiv i prilično precizan način. Stoga, gama zračenje može biti korišćeno nesamo za sterilizaciju nego i za dobijanje ovog biomaterijala poželjnih karakteristika., The influence of gamma radiation on the structure and glass transition behaviour of poly-L-lactide (PLLA) has been studied. Since PLLA exposed to high-energy radiation in the presence of air is prone to chain scission reactions and large degradation, changes in molecular weight were obtained by the gel permeation chromatography (GPC). Alterations in the glass transition behaviour were investigated by differential scanning calorimetry (DSC). The apparent activation energy, ΔH*, for the glass transition was determined on the basis of the heating rate dependence of the glass transition temperature, Tg. Our findings support the fact that chain scission is the main reason for the decrease of Tg and ΔH* with the absorbed dose. At low doses, despite large changes in molecular weight, only small alterations are observed in the glass transition temperature and apparent activation energy. Further increase in the absorbed dose introduces not only significant changes in the molecular weight but also in the glass transition temperature and the activation energy. Such glass transition behavior is a manifestation of a well-known effect of molecular weight on Tg, postulated by the Fox–Flory equation. However, all the observed alterations are small and tolerable at absorbed doses required for sterilization (up to 25 kGy in most circumstances). Furthermore, this study reveals that the radiation-induced changes in the molecular weight and the glass transition temperature occur in a predictable and fairly accurate manner. Therefore, gamma radiation can be used not only for sterilization but also for tailoring desirable end-use properties of PLLA based implants.",
publisher = "Association of Chemical Engineers of Serbia",
journal = "Hemijska industrija",
title = "Uticaj gama zračenja na molekulsku masu i staklasti prelaz PLLA, The Structure and Glass Transition Behaviour of PLLA under the Influence of Gamma Radiation",
volume = "64",
number = "4",
pages = "275-281",
doi = "10.2298/HEMIND100329020M"
}
Miličević, D., Trifunović, S., Mudrinić, T., Leskovac, A., Ignjatović, N., Dojčilović, J.,& Suljovrujić, E.. (2010). Uticaj gama zračenja na molekulsku masu i staklasti prelaz PLLA. in Hemijska industrija
Association of Chemical Engineers of Serbia., 64(4), 275-281.
https://doi.org/10.2298/HEMIND100329020M
Miličević D, Trifunović S, Mudrinić T, Leskovac A, Ignjatović N, Dojčilović J, Suljovrujić E. Uticaj gama zračenja na molekulsku masu i staklasti prelaz PLLA. in Hemijska industrija. 2010;64(4):275-281.
doi:10.2298/HEMIND100329020M .
Miličević, Dejan, Trifunović, Saša, Mudrinić, Tihana, Leskovac, Andreja, Ignjatović, Nenad, Dojčilović, Jablan, Suljovrujić, Edin, "Uticaj gama zračenja na molekulsku masu i staklasti prelaz PLLA" in Hemijska industrija, 64, no. 4 (2010):275-281,
https://doi.org/10.2298/HEMIND100329020M . .

Microstructure and Crystallinity of oriented polyolefins

Mudrinić, Tihana; Miličević, Dejan; Leskovac, Andreja; Mitrić, Miodrag; Suljovrujić, Edin

(Institute of Technical Sciences of the Serbian Academy of Sciences and Arts, 2010)

TY  - CONF
AU  - Mudrinić, Tihana
AU  - Miličević, Dejan
AU  - Leskovac, Andreja
AU  - Mitrić, Miodrag
AU  - Suljovrujić, Edin
PY  - 2010
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/7004
AB  - The influence of orientation on polyolefins was studied in accordance with Peterlin’s molecular model of drawing. Isotactic polypropylene and low density, linear low density and high density polyethylenes were oriented via solid-state stretching at an elevated temperature. Orientation induced changes in the morphology were analyzed by optical and scanning electron microscopy. Differential scanning calorimetry and wide-angle X-ray diffraction were used to determine changes in the crystallinity where a two-stage evolution was revealed. The first stage is characterized by a significant increase in crystallinity while the following saturation occurs with a further draw ratio increase at the second one. The value of the critical draw ratio, which separates these two stages and corresponds to the transformation from the initial to the fully developed fibrillar structure, was influenced by the structural peculiarities of each polyolefin.
PB  - Institute of Technical Sciences of the Serbian Academy of Sciences and Arts
C3  - Program and the book of abstracts - IX Ninth Young Researchers’ Conference Materials Science and Engineering, December 20-22 2010, Belgrade, Serbia
T1  - Microstructure and Crystallinity of oriented polyolefins
SP  - 22
EP  - 22
UR  - https://hdl.handle.net/21.15107/rcub_cer_7004
ER  - 
@conference{
author = "Mudrinić, Tihana and Miličević, Dejan and Leskovac, Andreja and Mitrić, Miodrag and Suljovrujić, Edin",
year = "2010",
abstract = "The influence of orientation on polyolefins was studied in accordance with Peterlin’s molecular model of drawing. Isotactic polypropylene and low density, linear low density and high density polyethylenes were oriented via solid-state stretching at an elevated temperature. Orientation induced changes in the morphology were analyzed by optical and scanning electron microscopy. Differential scanning calorimetry and wide-angle X-ray diffraction were used to determine changes in the crystallinity where a two-stage evolution was revealed. The first stage is characterized by a significant increase in crystallinity while the following saturation occurs with a further draw ratio increase at the second one. The value of the critical draw ratio, which separates these two stages and corresponds to the transformation from the initial to the fully developed fibrillar structure, was influenced by the structural peculiarities of each polyolefin.",
publisher = "Institute of Technical Sciences of the Serbian Academy of Sciences and Arts",
journal = "Program and the book of abstracts - IX Ninth Young Researchers’ Conference Materials Science and Engineering, December 20-22 2010, Belgrade, Serbia",
title = "Microstructure and Crystallinity of oriented polyolefins",
pages = "22-22",
url = "https://hdl.handle.net/21.15107/rcub_cer_7004"
}
Mudrinić, T., Miličević, D., Leskovac, A., Mitrić, M.,& Suljovrujić, E.. (2010). Microstructure and Crystallinity of oriented polyolefins. in Program and the book of abstracts - IX Ninth Young Researchers’ Conference Materials Science and Engineering, December 20-22 2010, Belgrade, Serbia
Institute of Technical Sciences of the Serbian Academy of Sciences and Arts., 22-22.
https://hdl.handle.net/21.15107/rcub_cer_7004
Mudrinić T, Miličević D, Leskovac A, Mitrić M, Suljovrujić E. Microstructure and Crystallinity of oriented polyolefins. in Program and the book of abstracts - IX Ninth Young Researchers’ Conference Materials Science and Engineering, December 20-22 2010, Belgrade, Serbia. 2010;:22-22.
https://hdl.handle.net/21.15107/rcub_cer_7004 .
Mudrinić, Tihana, Miličević, Dejan, Leskovac, Andreja, Mitrić, Miodrag, Suljovrujić, Edin, "Microstructure and Crystallinity of oriented polyolefins" in Program and the book of abstracts - IX Ninth Young Researchers’ Conference Materials Science and Engineering, December 20-22 2010, Belgrade, Serbia (2010):22-22,
https://hdl.handle.net/21.15107/rcub_cer_7004 .