TY  - JOUR
AU  - Sentić, Milica
AU  - Trajković, Ivana
AU  - Manojlović, Dragan
AU  - Stanković, Dalibor
AU  - Nikolić, Maria Vesna
AU  - Šojić, Nešo
AU  - Vidić, Jasmina
PY  - 2023
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/7109
AB  - Modern lifestyle has increased our utilization of pollutants such as heavy metals, aromatic 17 compounds, and contaminants of rising concern involving pharmaceutical and personal products 18 and other materials that may have an important environmental impact. Especially, the ultimate re-19 sults of intense use of highly stable materials, such as heavy metals and chemical restudies are that 20 they turn into waste materials which, when discharged, accumulate in the environment water bod-21 ies. In this context, the present review presents application of metal-organic frameworks (MOFs) in 22 electrochemiluminescent (ECL) sensing for water pollutant detection. MOF composites applied as 23 innovative luminophore or luminophore carriers, materials for electrode modification and enhance-24 ment of co-reaction in ECL sensors have enabled sensitive monitoring of some most common con-25 taminants of emerging concern such as heavy metals, volatile organic compounds, pharmaceuticals, 26 industrial chemicals and cyanotoxins. Moreover, we provide future trends and prospects associated 27 with ECL MOF-composites for environmental sensing.
PB  - MDPI
T2  - Materials
T1  - Luminescent Metal-Organic Frameworks for Electrochemiluminescent Detection of Water Pollutants
VL  - 16
IS  - 23
SP  - 7502
DO  - 10.3390/ma16237502
ER  - 

@article{
author = "Sentić, Milica and Trajković, Ivana and Manojlović, Dragan and Stanković, Dalibor and Nikolić, Maria Vesna and Šojić, Nešo and Vidić, Jasmina",
year = "2023",
abstract = "Modern lifestyle has increased our utilization of pollutants such as heavy metals, aromatic 17 compounds, and contaminants of rising concern involving pharmaceutical and personal products 18 and other materials that may have an important environmental impact. Especially, the ultimate re-19 sults of intense use of highly stable materials, such as heavy metals and chemical restudies are that 20 they turn into waste materials which, when discharged, accumulate in the environment water bod-21 ies. In this context, the present review presents application of metal-organic frameworks (MOFs) in 22 electrochemiluminescent (ECL) sensing for water pollutant detection. MOF composites applied as 23 innovative luminophore or luminophore carriers, materials for electrode modification and enhance-24 ment of co-reaction in ECL sensors have enabled sensitive monitoring of some most common con-25 taminants of emerging concern such as heavy metals, volatile organic compounds, pharmaceuticals, 26 industrial chemicals and cyanotoxins. Moreover, we provide future trends and prospects associated 27 with ECL MOF-composites for environmental sensing.",
publisher = "MDPI",
journal = "Materials",
title = "Luminescent Metal-Organic Frameworks for Electrochemiluminescent Detection of Water Pollutants",
volume = "16",
number = "23",
pages = "7502",
doi = "10.3390/ma16237502"
}

Sentić, M., Trajković, I., Manojlović, D., Stanković, D., Nikolić, M. V., Šojić, N.,& Vidić, J.. (2023). Luminescent Metal-Organic Frameworks for Electrochemiluminescent Detection of Water Pollutants. in Materials
MDPI., 16(23), 7502.
https://doi.org/10.3390/ma16237502

Sentić M, Trajković I, Manojlović D, Stanković D, Nikolić MV, Šojić N, Vidić J. Luminescent Metal-Organic Frameworks for Electrochemiluminescent Detection of Water Pollutants. in Materials. 2023;16(23):7502.
doi:10.3390/ma16237502 .

Sentić, Milica, Trajković, Ivana, Manojlović, Dragan, Stanković, Dalibor, Nikolić, Maria Vesna, Šojić, Nešo, Vidić, Jasmina, "Luminescent Metal-Organic Frameworks for Electrochemiluminescent Detection of Water Pollutants" in Materials, 16, no. 23 (2023):7502,
https://doi.org/10.3390/ma16237502 . .

TY  - CONF
AU  - Dojčinović, Milena
AU  - Vasiljević, Zorka Z
AU  - Tadic, Nenad
AU  - Krstić, Jugoslav
AU  - Nikolić, Maria Vesna
PY  - 2022
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/6765
AB  - Transition metal oxides (TMOs) are promising materials because of their specific properties enabling their application in energy solutions, such as their pseudocapacitive behavior enabling utilization as electrode materials in supercapacitors. Activated carbon is a material well known as an electric double layer capacitor (EDLC). Bringing together the two different capacitor materials- TMOs as pseudocapacitors and carbon materials as EDL capacitors is the goal for generating future generation supercapacitors. Nickel manganite is a material of interest because of various oxidation states of manganese which provide its reactivity in oxidoreduction reactions, enhancing the pseudocapacitive behavior. Herein, we synthesized nano-sized nickel manganite by a sol-gel combustion synthesis process using glycine as fuel and subsequent calcination process. The structure and morphology of synthesized material was investigated via XRD, FESEM, and FTIR spectroscopy. Specific surface area and was determined from measured nitrogen  desorption/desorption isotherms. Activated carbon was obtained by pyrolytic carbonization of alginate hydrogel in nitrogen atmosphere and activation with KOH. The material was combined with synthesized NiMn2O4 nanopowder and tested as supercapacitor electrode. The second alternative was incorporating NiMn2O4 powder into alginate hydrogel, followed by pyrolysis in nitrogen atmosphere to obtain a NiMn2O4 -activatedcarbon composite. The obtained materials were electrochemically characterized with cyclic voltammetry (LV) and galvanostatic chronopotentiometry to get galvanostatic charge-discharge curves. We calculated high specific capacitance values ranging to several hundred F/g, showing our hybrid material is a promising electrode in a supercapacitor system.
PB  - Krakow : Agencja Reklamowa EURO GRAPHIC
PB  - Krakow : Polskie Towarzystwo Ceramiczne
C3  - Abstract Book - Ceramics in Europe 2022, 10-14 July, 2022, Krakow
T1  - Alginate-derived activated carbon hybridized with NiMn2O4 for use in supercapacitors
SP  - 404
UR  - https://hdl.handle.net/21.15107/rcub_cer_6765
ER  - 

@conference{
author = "Dojčinović, Milena and Vasiljević, Zorka Z and Tadic, Nenad and Krstić, Jugoslav and Nikolić, Maria Vesna",
year = "2022",
abstract = "Transition metal oxides (TMOs) are promising materials because of their specific properties enabling their application in energy solutions, such as their pseudocapacitive behavior enabling utilization as electrode materials in supercapacitors. Activated carbon is a material well known as an electric double layer capacitor (EDLC). Bringing together the two different capacitor materials- TMOs as pseudocapacitors and carbon materials as EDL capacitors is the goal for generating future generation supercapacitors. Nickel manganite is a material of interest because of various oxidation states of manganese which provide its reactivity in oxidoreduction reactions, enhancing the pseudocapacitive behavior. Herein, we synthesized nano-sized nickel manganite by a sol-gel combustion synthesis process using glycine as fuel and subsequent calcination process. The structure and morphology of synthesized material was investigated via XRD, FESEM, and FTIR spectroscopy. Specific surface area and was determined from measured nitrogen  desorption/desorption isotherms. Activated carbon was obtained by pyrolytic carbonization of alginate hydrogel in nitrogen atmosphere and activation with KOH. The material was combined with synthesized NiMn2O4 nanopowder and tested as supercapacitor electrode. The second alternative was incorporating NiMn2O4 powder into alginate hydrogel, followed by pyrolysis in nitrogen atmosphere to obtain a NiMn2O4 -activatedcarbon composite. The obtained materials were electrochemically characterized with cyclic voltammetry (LV) and galvanostatic chronopotentiometry to get galvanostatic charge-discharge curves. We calculated high specific capacitance values ranging to several hundred F/g, showing our hybrid material is a promising electrode in a supercapacitor system.",
publisher = "Krakow : Agencja Reklamowa EURO GRAPHIC, Krakow : Polskie Towarzystwo Ceramiczne",
journal = "Abstract Book - Ceramics in Europe 2022, 10-14 July, 2022, Krakow",
title = "Alginate-derived activated carbon hybridized with NiMn2O4 for use in supercapacitors",
pages = "404",
url = "https://hdl.handle.net/21.15107/rcub_cer_6765"
}

Dojčinović, M., Vasiljević, Z. Z., Tadic, N., Krstić, J.,& Nikolić, M. V.. (2022). Alginate-derived activated carbon hybridized with NiMn2O4 for use in supercapacitors. in Abstract Book - Ceramics in Europe 2022, 10-14 July, 2022, Krakow
Krakow : Agencja Reklamowa EURO GRAPHIC., 404.
https://hdl.handle.net/21.15107/rcub_cer_6765

Dojčinović M, Vasiljević ZZ, Tadic N, Krstić J, Nikolić MV. Alginate-derived activated carbon hybridized with NiMn2O4 for use in supercapacitors. in Abstract Book - Ceramics in Europe 2022, 10-14 July, 2022, Krakow. 2022;:404.
https://hdl.handle.net/21.15107/rcub_cer_6765 .

Dojčinović, Milena, Vasiljević, Zorka Z, Tadic, Nenad, Krstić, Jugoslav, Nikolić, Maria Vesna, "Alginate-derived activated carbon hybridized with NiMn2O4 for use in supercapacitors" in Abstract Book - Ceramics in Europe 2022, 10-14 July, 2022, Krakow (2022):404,
https://hdl.handle.net/21.15107/rcub_cer_6765 .

TY  - JOUR
AU  - Nikolić, Maria Vesna
AU  - Krstić, Jugoslav
AU  - Labus, Nebojša
AU  - Luković, Miloljub
AU  - Dojčinović, Milena P.
AU  - Radovanović, Milan
AU  - Tadić, Nenad
PY  - 2020
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/3573
AB  - Iron manganite (FeMnO3) powder with a cubic (bixbyite,
−
Ia3) crystal structure was obtained by a solid state
reaction. Thick film paste (powder+organic vehicles) was screen printed on alumina substrate with test interdigitated
PdAg electrodes. Significant porosity (60.6%) composed of macropores (larger than 100 nm) was
determined by Hg porosimetry, changing only slightly from the first extrusion run indicating a stable pore
system. Hg porosimetry evaluation of thick film samples enabled estimation of true textural parameters of the
thick film compared to powder. Impedance response of the thick film sensor was monitored in a humidity
chamber in the relative humidity (RH) range 30–90%, at room temperature (25 °C) and frequency range from
42 Hz to 1 MHz. At 100 Hz the impedance reduced from 10.41 MΩ for RH 30% to 0.68 MΩ for RH 90%. Analysis
of complex impedance using an equivalent circuit showed the dominant influence of grain boundaries. The
sensor response and recovery was fast (several seconds) and a relatively low hysteresis value of 2.8% was
obtained.
PB  - Elsevier
T2  - Materials Science and Engineering B: Solid-State Materials for Advanced Technology
T1  - Structural, morphological and textural properties of iron manganite (FeMnO3) thick films applied for humidity sensing
VL  - 257
SP  - 114547
DO  - 10.1016/j.mseb.2020.114547
ER  - 

@article{
author = "Nikolić, Maria Vesna and Krstić, Jugoslav and Labus, Nebojša and Luković, Miloljub and Dojčinović, Milena P. and Radovanović, Milan and Tadić, Nenad",
year = "2020",
abstract = "Iron manganite (FeMnO3) powder with a cubic (bixbyite,
−
Ia3) crystal structure was obtained by a solid state
reaction. Thick film paste (powder+organic vehicles) was screen printed on alumina substrate with test interdigitated
PdAg electrodes. Significant porosity (60.6%) composed of macropores (larger than 100 nm) was
determined by Hg porosimetry, changing only slightly from the first extrusion run indicating a stable pore
system. Hg porosimetry evaluation of thick film samples enabled estimation of true textural parameters of the
thick film compared to powder. Impedance response of the thick film sensor was monitored in a humidity
chamber in the relative humidity (RH) range 30–90%, at room temperature (25 °C) and frequency range from
42 Hz to 1 MHz. At 100 Hz the impedance reduced from 10.41 MΩ for RH 30% to 0.68 MΩ for RH 90%. Analysis
of complex impedance using an equivalent circuit showed the dominant influence of grain boundaries. The
sensor response and recovery was fast (several seconds) and a relatively low hysteresis value of 2.8% was
obtained.",
publisher = "Elsevier",
journal = "Materials Science and Engineering B: Solid-State Materials for Advanced Technology",
title = "Structural, morphological and textural properties of iron manganite (FeMnO3) thick films applied for humidity sensing",
volume = "257",
pages = "114547",
doi = "10.1016/j.mseb.2020.114547"
}

Nikolić, M. V., Krstić, J., Labus, N., Luković, M., Dojčinović, M. P., Radovanović, M.,& Tadić, N.. (2020). Structural, morphological and textural properties of iron manganite (FeMnO3) thick films applied for humidity sensing. in Materials Science and Engineering B: Solid-State Materials for Advanced Technology
Elsevier., 257, 114547.
https://doi.org/10.1016/j.mseb.2020.114547

Nikolić MV, Krstić J, Labus N, Luković M, Dojčinović MP, Radovanović M, Tadić N. Structural, morphological and textural properties of iron manganite (FeMnO3) thick films applied for humidity sensing. in Materials Science and Engineering B: Solid-State Materials for Advanced Technology. 2020;257:114547.
doi:10.1016/j.mseb.2020.114547 .

Nikolić, Maria Vesna, Krstić, Jugoslav, Labus, Nebojša, Luković, Miloljub, Dojčinović, Milena P., Radovanović, Milan, Tadić, Nenad, "Structural, morphological and textural properties of iron manganite (FeMnO3) thick films applied for humidity sensing" in Materials Science and Engineering B: Solid-State Materials for Advanced Technology, 257 (2020):114547,
https://doi.org/10.1016/j.mseb.2020.114547 . .

TY  - JOUR
AU  - Vasiljević, Zorka
AU  - Dojčinović, Milena P.
AU  - Krstić, Jugoslav
AU  - Ribić, Vesna
AU  - Tadić, Nenad
AU  - Ognjanović, Miloš
AU  - Auger, Sandrine
AU  - Vidić, Jasmina
AU  - Nikolić, Maria Vesna
PY  - 2020
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/3572
AB  - Nanocrystalline iron manganite powder was synthesized using the sol–gel combustion process, with
glycine as fuel. It was further calcined at 900  C for 8 h, resulting in the formation of a loose cubic
FeMnO3 powder with a small specific surface area, net-like structure and plate-like particles as
confirmed by XRD, N2 physisorption, FESEM and TEM analyses. The metal ion release was studied by
ICP-OES and showed that less than 10 ppb of Fe or Mn ions were released by leaching in water, but
0.36 ppm Fe and 3.69 ppm Mn was found in LB (Luria–Bertani) bacterial medium. The generation of
reactive oxygen species (ROS) was monitored in distilled water and bacterial medium and showed that
FeMnO3 particles do not generate O2c
  ions with or without UV irradiation, but synthesize H2O2 and
show an antioxidative effect. Besides the higher stability of FeMnO3 particles in aqueous solution they
showed an inhibitory effect on Bacillus subtilis growth in LB medium even at low concentrations
(0.01 mg ml 1), but not in BHI medium even at 1 mg ml 1. This study points out that the mechanism of
antibacterial action of engineered metal oxides needs continued investigation and specific experimental
controls
PB  - London : Royal Society of Chemistry
T2  - RSC Advances
T1  - Synthesis and antibacterial activity of iron manganite (FeMnO3) particles against the environmental bacterium Bacillus subtilis
VL  - 10
IS  - 23
SP  - 13879
EP  - 13888
DO  - 10.1039/d0ra01809k
ER  - 

@article{
author = "Vasiljević, Zorka and Dojčinović, Milena P. and Krstić, Jugoslav and Ribić, Vesna and Tadić, Nenad and Ognjanović, Miloš and Auger, Sandrine and Vidić, Jasmina and Nikolić, Maria Vesna",
year = "2020",
abstract = "Nanocrystalline iron manganite powder was synthesized using the sol–gel combustion process, with
glycine as fuel. It was further calcined at 900  C for 8 h, resulting in the formation of a loose cubic
FeMnO3 powder with a small specific surface area, net-like structure and plate-like particles as
confirmed by XRD, N2 physisorption, FESEM and TEM analyses. The metal ion release was studied by
ICP-OES and showed that less than 10 ppb of Fe or Mn ions were released by leaching in water, but
0.36 ppm Fe and 3.69 ppm Mn was found in LB (Luria–Bertani) bacterial medium. The generation of
reactive oxygen species (ROS) was monitored in distilled water and bacterial medium and showed that
FeMnO3 particles do not generate O2c
  ions with or without UV irradiation, but synthesize H2O2 and
show an antioxidative effect. Besides the higher stability of FeMnO3 particles in aqueous solution they
showed an inhibitory effect on Bacillus subtilis growth in LB medium even at low concentrations
(0.01 mg ml 1), but not in BHI medium even at 1 mg ml 1. This study points out that the mechanism of
antibacterial action of engineered metal oxides needs continued investigation and specific experimental
controls",
publisher = "London : Royal Society of Chemistry",
journal = "RSC Advances",
title = "Synthesis and antibacterial activity of iron manganite (FeMnO3) particles against the environmental bacterium Bacillus subtilis",
volume = "10",
number = "23",
pages = "13879-13888",
doi = "10.1039/d0ra01809k"
}

Vasiljević, Z., Dojčinović, M. P., Krstić, J., Ribić, V., Tadić, N., Ognjanović, M., Auger, S., Vidić, J.,& Nikolić, M. V.. (2020). Synthesis and antibacterial activity of iron manganite (FeMnO3) particles against the environmental bacterium Bacillus subtilis. in RSC Advances
London : Royal Society of Chemistry., 10(23), 13879-13888.
https://doi.org/10.1039/d0ra01809k

Vasiljević Z, Dojčinović MP, Krstić J, Ribić V, Tadić N, Ognjanović M, Auger S, Vidić J, Nikolić MV. Synthesis and antibacterial activity of iron manganite (FeMnO3) particles against the environmental bacterium Bacillus subtilis. in RSC Advances. 2020;10(23):13879-13888.
doi:10.1039/d0ra01809k .

Vasiljević, Zorka, Dojčinović, Milena P., Krstić, Jugoslav, Ribić, Vesna, Tadić, Nenad, Ognjanović, Miloš, Auger, Sandrine, Vidić, Jasmina, Nikolić, Maria Vesna, "Synthesis and antibacterial activity of iron manganite (FeMnO3) particles against the environmental bacterium Bacillus subtilis" in RSC Advances, 10, no. 23 (2020):13879-13888,
https://doi.org/10.1039/d0ra01809k . .

TY  - JOUR
AU  - Nikolić, Maria Vesna
AU  - Krstić, Jugoslav
AU  - Labus, Nebojša
AU  - Luković, Miloljub
AU  - Dojčinović, Milena P.
AU  - Radovanović, Milan
AU  - Tadić, Nenad
PY  - 2020
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/4278
AB  - Iron manganite (FeMnO3) powder with a cubic (bixbyite,−Ia3) crystal structure was obtained by a solid statereaction. Thick film paste (powder+organic vehicles) was screen printed on alumina substrate with test interdigitatedPdAg electrodes. Significant porosity (60.6%) composed of macropores (larger than 100 nm) wasdetermined by Hg porosimetry, changing only slightly from the first extrusion run indicating a stable poresystem. Hg porosimetry evaluation of thick film samples enabled estimation of true textural parameters of thethick film compared to powder. Impedance response of the thick film sensor was monitored in a humiditychamber in the relative humidity (RH) range 30–90%, at room temperature (25 °C) and frequency range from42 Hz to 1 MHz. At 100 Hz the impedance reduced from 10.41 MΩ for RH 30% to 0.68 MΩ for RH 90%. Analysisof complex impedance using an equivalent circuit showed the dominant influence of grain boundaries. Thesensor response and recovery was fast (several seconds) and a relatively low hysteresis value of 2.8% wasobtained.
PB  - Elsevier
T2  - Materials Science and Engineering B: Solid-State Materials for Advanced Technology
T1  - Structural, morphological and textural properties of iron manganite (FeMnO3) thick films applied for humidity sensing
VL  - 257
SP  - 114547
DO  - 10.1016/j.mseb.2020.114547
ER  - 

@article{
author = "Nikolić, Maria Vesna and Krstić, Jugoslav and Labus, Nebojša and Luković, Miloljub and Dojčinović, Milena P. and Radovanović, Milan and Tadić, Nenad",
year = "2020",
abstract = "Iron manganite (FeMnO3) powder with a cubic (bixbyite,−Ia3) crystal structure was obtained by a solid statereaction. Thick film paste (powder+organic vehicles) was screen printed on alumina substrate with test interdigitatedPdAg electrodes. Significant porosity (60.6%) composed of macropores (larger than 100 nm) wasdetermined by Hg porosimetry, changing only slightly from the first extrusion run indicating a stable poresystem. Hg porosimetry evaluation of thick film samples enabled estimation of true textural parameters of thethick film compared to powder. Impedance response of the thick film sensor was monitored in a humiditychamber in the relative humidity (RH) range 30–90%, at room temperature (25 °C) and frequency range from42 Hz to 1 MHz. At 100 Hz the impedance reduced from 10.41 MΩ for RH 30% to 0.68 MΩ for RH 90%. Analysisof complex impedance using an equivalent circuit showed the dominant influence of grain boundaries. Thesensor response and recovery was fast (several seconds) and a relatively low hysteresis value of 2.8% wasobtained.",
publisher = "Elsevier",
journal = "Materials Science and Engineering B: Solid-State Materials for Advanced Technology",
title = "Structural, morphological and textural properties of iron manganite (FeMnO3) thick films applied for humidity sensing",
volume = "257",
pages = "114547",
doi = "10.1016/j.mseb.2020.114547"
}

Nikolić, M. V., Krstić, J., Labus, N., Luković, M., Dojčinović, M. P., Radovanović, M.,& Tadić, N.. (2020). Structural, morphological and textural properties of iron manganite (FeMnO3) thick films applied for humidity sensing. in Materials Science and Engineering B: Solid-State Materials for Advanced Technology
Elsevier., 257, 114547.
https://doi.org/10.1016/j.mseb.2020.114547

Nikolić MV, Krstić J, Labus N, Luković M, Dojčinović MP, Radovanović M, Tadić N. Structural, morphological and textural properties of iron manganite (FeMnO3) thick films applied for humidity sensing. in Materials Science and Engineering B: Solid-State Materials for Advanced Technology. 2020;257:114547.
doi:10.1016/j.mseb.2020.114547 .

Nikolić, Maria Vesna, Krstić, Jugoslav, Labus, Nebojša, Luković, Miloljub, Dojčinović, Milena P., Radovanović, Milan, Tadić, Nenad, "Structural, morphological and textural properties of iron manganite (FeMnO3) thick films applied for humidity sensing" in Materials Science and Engineering B: Solid-State Materials for Advanced Technology, 257 (2020):114547,
https://doi.org/10.1016/j.mseb.2020.114547 . .

TY  - JOUR
AU  - Nikolić, Maria Vesna
AU  - Vasiljević, Zorka
AU  - Luković, Miloljub
AU  - Pavlović, Vera P.
AU  - Krstić, Jugoslav
AU  - Vujančević, Jelena
AU  - Tadić, Nenad
AU  - Vlahović, Branislav
AU  - Pavlović, Vladimir B.
PY  - 2019
UR  - https://ceramics.onlinelibrary.wiley.com/doi/abs/10.1111/ijac.13190
UR  - http://dais.sanu.ac.rs/123456789/4848
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/2603
AB  - Zinc ferrite nanocrystalline powder was obtained by solid state synthesis of starting zinc oxide and hematite nanopowders. Field emission scanning electron microscopy (FESEM and transmission electron microscopy (TEM), X‐ray diffraction (XRD), X‐ray photoelectron spectroscopy (XPS) and Raman spectroscopy confirmed the formation of nanocrystalline zinc‐ferrite powder with a mixed spinel structure with small amounts of remaining zinc oxide and hematite as impurities. Thick film paste was formed and screen printed on test interdigitated PdAg electrodes on alumina substrate. Formation of a porous nanocrystalline structure was confirmed by scanning electron microscopy (SEM) and Hg porosimetry. Humidity sensing properties of zinc ferrite thick films were investigated by monitoring the change in impedance in the relative humidity interval 30‐90% in the frequency range 42 Hz – 1 MHz at room temperature (25 °C) and 50 °C. At 42 Hz at both analyzed temperatures the impedance reduced ~ 46 times in the humidity range 30‐90%. The dominant influence of grain boundaries was confirmed by analysis of complex impedance with an equivalent circuit.
PB  - John Wiley & Sons, Inc.
T2  - International Journal of Applied Ceramic Technology
T1  - Investigation of ZnFe2O4 spinel ferrite nanocrystalline screen‐printed thick films for application in humidity sensing
DO  - 10.1111/ijac.13190
ER  - 

@article{
author = "Nikolić, Maria Vesna and Vasiljević, Zorka and Luković, Miloljub and Pavlović, Vera P. and Krstić, Jugoslav and Vujančević, Jelena and Tadić, Nenad and Vlahović, Branislav and Pavlović, Vladimir B.",
year = "2019",
abstract = "Zinc ferrite nanocrystalline powder was obtained by solid state synthesis of starting zinc oxide and hematite nanopowders. Field emission scanning electron microscopy (FESEM and transmission electron microscopy (TEM), X‐ray diffraction (XRD), X‐ray photoelectron spectroscopy (XPS) and Raman spectroscopy confirmed the formation of nanocrystalline zinc‐ferrite powder with a mixed spinel structure with small amounts of remaining zinc oxide and hematite as impurities. Thick film paste was formed and screen printed on test interdigitated PdAg electrodes on alumina substrate. Formation of a porous nanocrystalline structure was confirmed by scanning electron microscopy (SEM) and Hg porosimetry. Humidity sensing properties of zinc ferrite thick films were investigated by monitoring the change in impedance in the relative humidity interval 30‐90% in the frequency range 42 Hz – 1 MHz at room temperature (25 °C) and 50 °C. At 42 Hz at both analyzed temperatures the impedance reduced ~ 46 times in the humidity range 30‐90%. The dominant influence of grain boundaries was confirmed by analysis of complex impedance with an equivalent circuit.",
publisher = "John Wiley & Sons, Inc.",
journal = "International Journal of Applied Ceramic Technology",
title = "Investigation of ZnFe2O4 spinel ferrite nanocrystalline screen‐printed thick films for application in humidity sensing",
doi = "10.1111/ijac.13190"
}

Nikolić, M. V., Vasiljević, Z., Luković, M., Pavlović, V. P., Krstić, J., Vujančević, J., Tadić, N., Vlahović, B.,& Pavlović, V. B.. (2019). Investigation of ZnFe2O4 spinel ferrite nanocrystalline screen‐printed thick films for application in humidity sensing. in International Journal of Applied Ceramic Technology
John Wiley & Sons, Inc...
https://doi.org/10.1111/ijac.13190

Nikolić MV, Vasiljević Z, Luković M, Pavlović VP, Krstić J, Vujančević J, Tadić N, Vlahović B, Pavlović VB. Investigation of ZnFe2O4 spinel ferrite nanocrystalline screen‐printed thick films for application in humidity sensing. in International Journal of Applied Ceramic Technology. 2019;.
doi:10.1111/ijac.13190 .

Nikolić, Maria Vesna, Vasiljević, Zorka, Luković, Miloljub, Pavlović, Vera P., Krstić, Jugoslav, Vujančević, Jelena, Tadić, Nenad, Vlahović, Branislav, Pavlović, Vladimir B., "Investigation of ZnFe2O4 spinel ferrite nanocrystalline screen‐printed thick films for application in humidity sensing" in International Journal of Applied Ceramic Technology (2019),
https://doi.org/10.1111/ijac.13190 . .

TY  - JOUR
AU  - Nikolić, Maria Vesna
AU  - Vasiljević, Zorka
AU  - Luković, Miloljub
AU  - Pavlović, Vera P.
AU  - Krstić, Jugoslav
AU  - Vujančević, Jelena
AU  - Tadić, Nenad
AU  - Vlahović, Branislav
AU  - Pavlović, Vladimir B.
PY  - 2019
UR  - https://ceramics.onlinelibrary.wiley.com/doi/abs/10.1111/ijac.13190
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/2851
AB  - Zinc ferrite nanocrystalline powder was obtained by solid state synthesis of starting zinc oxide and hematite nanopowders. Field emission scanning electron microscopy (FESEM and transmission electron microscopy (TEM), X‐ray diffraction (XRD), X‐ray photoelectron spectroscopy (XPS) and Raman spectroscopy confirmed the formation of nanocrystalline zinc‐ferrite powder with a mixed spinel structure with small amounts of remaining zinc oxide and hematite as impurities. Thick film paste was formed and screen printed on test interdigitated PdAg electrodes on alumina substrate. Formation of a porous nanocrystalline structure was confirmed by scanning electron microscopy (SEM) and Hg porosimetry. Humidity sensing properties of zinc ferrite thick films were investigated by monitoring the change in impedance in the relative humidity interval 30‐90% in the frequency range 42 Hz – 1 MHz at room temperature (25 °C) and 50 °C. At 42 Hz at both analyzed temperatures the impedance reduced ~ 46 times in the humidity range 30‐90%. The dominant influence of grain boundaries was confirmed by analysis of complex impedance with an equivalent circuit.
PB  - John Wiley & Sons, Inc.
T2  - International Journal of Applied Ceramic Technology
T1  - Investigation of ZnFe2O4 spinel ferrite nanocrystalline screen‐printed thick films for application in humidity sensing
VL  - 16
IS  - 3
SP  - 981
EP  - 993
DO  - 10.1111/ijac.13190
ER  - 

@article{
author = "Nikolić, Maria Vesna and Vasiljević, Zorka and Luković, Miloljub and Pavlović, Vera P. and Krstić, Jugoslav and Vujančević, Jelena and Tadić, Nenad and Vlahović, Branislav and Pavlović, Vladimir B.",
year = "2019",
abstract = "Zinc ferrite nanocrystalline powder was obtained by solid state synthesis of starting zinc oxide and hematite nanopowders. Field emission scanning electron microscopy (FESEM and transmission electron microscopy (TEM), X‐ray diffraction (XRD), X‐ray photoelectron spectroscopy (XPS) and Raman spectroscopy confirmed the formation of nanocrystalline zinc‐ferrite powder with a mixed spinel structure with small amounts of remaining zinc oxide and hematite as impurities. Thick film paste was formed and screen printed on test interdigitated PdAg electrodes on alumina substrate. Formation of a porous nanocrystalline structure was confirmed by scanning electron microscopy (SEM) and Hg porosimetry. Humidity sensing properties of zinc ferrite thick films were investigated by monitoring the change in impedance in the relative humidity interval 30‐90% in the frequency range 42 Hz – 1 MHz at room temperature (25 °C) and 50 °C. At 42 Hz at both analyzed temperatures the impedance reduced ~ 46 times in the humidity range 30‐90%. The dominant influence of grain boundaries was confirmed by analysis of complex impedance with an equivalent circuit.",
publisher = "John Wiley & Sons, Inc.",
journal = "International Journal of Applied Ceramic Technology",
title = "Investigation of ZnFe2O4 spinel ferrite nanocrystalline screen‐printed thick films for application in humidity sensing",
volume = "16",
number = "3",
pages = "981-993",
doi = "10.1111/ijac.13190"
}

Nikolić, M. V., Vasiljević, Z., Luković, M., Pavlović, V. P., Krstić, J., Vujančević, J., Tadić, N., Vlahović, B.,& Pavlović, V. B.. (2019). Investigation of ZnFe2O4 spinel ferrite nanocrystalline screen‐printed thick films for application in humidity sensing. in International Journal of Applied Ceramic Technology
John Wiley & Sons, Inc.., 16(3), 981-993.
https://doi.org/10.1111/ijac.13190

Nikolić MV, Vasiljević Z, Luković M, Pavlović VP, Krstić J, Vujančević J, Tadić N, Vlahović B, Pavlović VB. Investigation of ZnFe2O4 spinel ferrite nanocrystalline screen‐printed thick films for application in humidity sensing. in International Journal of Applied Ceramic Technology. 2019;16(3):981-993.
doi:10.1111/ijac.13190 .

Nikolić, Maria Vesna, Vasiljević, Zorka, Luković, Miloljub, Pavlović, Vera P., Krstić, Jugoslav, Vujančević, Jelena, Tadić, Nenad, Vlahović, Branislav, Pavlović, Vladimir B., "Investigation of ZnFe2O4 spinel ferrite nanocrystalline screen‐printed thick films for application in humidity sensing" in International Journal of Applied Ceramic Technology, 16, no. 3 (2019):981-993,
https://doi.org/10.1111/ijac.13190 . .

TY  - JOUR
AU  - Nikolić, Maria Vesna
AU  - Vasiljević, Zorka
AU  - Luković, Miloljub
AU  - Pavlović, Vera P.
AU  - Vujancevic, J.
AU  - Radovanović, M.
AU  - Krstić, Jugoslav
AU  - Vlahovic, B.
AU  - Pavlović, Vladimir B.
PY  - 2018
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/4277
AB  - Pseudobrookite based nanopowder was obtained by solid state synthesis of starting hematite and anatase nanopowders in the weight ratio 55:45. Structural and morphological properties were analyzed using X-ray diffraction (XRD), BET, X-ray photoelectron spectroscopy (XPS), Raman spectroscopy, UV/Vis diffuse reflectance spectroscopy, Field emission scanning electron microscopy (FESEM) and Transmission electron microscopy (TEM) confirming the formation of nanocrystalline pseudobrookite. The obtained powder was mixed with a binder (ethyl cellulose), dispersant (α-terpinol) and adhesion agents (acetic acid and distilled water) to obtain a thick film paste. It was screen printed on alumina substrate with interdigitated PdAg electrodes and fired at 600 °C for 30 min. Formation of a porous nanocrystalline thick film structure was shown using Scanning electron microscopy (SEM), while Hall measurements enabled determination of carrier mobility. Change of impedance response in the frequency range 42 Hz–1 MHz with humidity was analyzed at room temperature (25 °C) and 50 °C in the relative humidity range 30–90% and 40–90%, respectively. At 42 Hz, and room temperature the impedance reduced ∼28 times, while at 50 °C it reduced ∼147 times in the relative humidity range 40–90%. The sensor showed rapid response (16 s) and relatively low hysteresis (8.39% at 25 °C and 2.64% at 50 °C) showing that this is a promising material for application in humidity sensing.
PB  - Elsevier
T2  - Sensors and Actuators, B: Chemical
T1  - Humidity sensing properties of nanocrystalline pseudobrookite (Fe2TiO5) based thick films
VL  - 277
SP  - 654
EP  - 664
DO  - 10.1016/j.snb.2018.09.063
ER  - 

@article{
author = "Nikolić, Maria Vesna and Vasiljević, Zorka and Luković, Miloljub and Pavlović, Vera P. and Vujancevic, J. and Radovanović, M. and Krstić, Jugoslav and Vlahovic, B. and Pavlović, Vladimir B.",
year = "2018",
abstract = "Pseudobrookite based nanopowder was obtained by solid state synthesis of starting hematite and anatase nanopowders in the weight ratio 55:45. Structural and morphological properties were analyzed using X-ray diffraction (XRD), BET, X-ray photoelectron spectroscopy (XPS), Raman spectroscopy, UV/Vis diffuse reflectance spectroscopy, Field emission scanning electron microscopy (FESEM) and Transmission electron microscopy (TEM) confirming the formation of nanocrystalline pseudobrookite. The obtained powder was mixed with a binder (ethyl cellulose), dispersant (α-terpinol) and adhesion agents (acetic acid and distilled water) to obtain a thick film paste. It was screen printed on alumina substrate with interdigitated PdAg electrodes and fired at 600 °C for 30 min. Formation of a porous nanocrystalline thick film structure was shown using Scanning electron microscopy (SEM), while Hall measurements enabled determination of carrier mobility. Change of impedance response in the frequency range 42 Hz–1 MHz with humidity was analyzed at room temperature (25 °C) and 50 °C in the relative humidity range 30–90% and 40–90%, respectively. At 42 Hz, and room temperature the impedance reduced ∼28 times, while at 50 °C it reduced ∼147 times in the relative humidity range 40–90%. The sensor showed rapid response (16 s) and relatively low hysteresis (8.39% at 25 °C and 2.64% at 50 °C) showing that this is a promising material for application in humidity sensing.",
publisher = "Elsevier",
journal = "Sensors and Actuators, B: Chemical",
title = "Humidity sensing properties of nanocrystalline pseudobrookite (Fe2TiO5) based thick films",
volume = "277",
pages = "654-664",
doi = "10.1016/j.snb.2018.09.063"
}

Nikolić, M. V., Vasiljević, Z., Luković, M., Pavlović, V. P., Vujancevic, J., Radovanović, M., Krstić, J., Vlahovic, B.,& Pavlović, V. B.. (2018). Humidity sensing properties of nanocrystalline pseudobrookite (Fe2TiO5) based thick films. in Sensors and Actuators, B: Chemical
Elsevier., 277, 654-664.
https://doi.org/10.1016/j.snb.2018.09.063

Nikolić MV, Vasiljević Z, Luković M, Pavlović VP, Vujancevic J, Radovanović M, Krstić J, Vlahovic B, Pavlović VB. Humidity sensing properties of nanocrystalline pseudobrookite (Fe2TiO5) based thick films. in Sensors and Actuators, B: Chemical. 2018;277:654-664.
doi:10.1016/j.snb.2018.09.063 .

Nikolić, Maria Vesna, Vasiljević, Zorka, Luković, Miloljub, Pavlović, Vera P., Vujancevic, J., Radovanović, M., Krstić, Jugoslav, Vlahovic, B., Pavlović, Vladimir B., "Humidity sensing properties of nanocrystalline pseudobrookite (Fe2TiO5) based thick films" in Sensors and Actuators, B: Chemical, 277 (2018):654-664,
https://doi.org/10.1016/j.snb.2018.09.063 . .

TY  - JOUR
AU  - Nikolić, Maria Vesna
AU  - Vasiljević, Zorka
AU  - Luković, Miloljub
AU  - Pavlović, Vera P.
AU  - Vujancevic, J.
AU  - Radovanović, M.
AU  - Krstić, Jugoslav
AU  - Vlahovic, B.
AU  - Pavlović, Vladimir B.
PY  - 2018
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/2414
AB  - Pseudobrookite based nanopowder was obtained by solid state synthesis of starting hematite and anatase nanopowders in the weight ratio 55:45. Structural and morphological properties were analyzed using X-ray diffraction (XRD), BET, X-ray photoelectron spectroscopy (XPS), Raman spectroscopy, UV/Vis diffuse reflectance spectroscopy, Field emission scanning electron microscopy (FESEM) and Transmission electron microscopy (TEM) confirming the formation of nanocrystalline pseudobrookite. The obtained powder was mixed with a binder (ethyl cellulose), dispersant (α-terpinol) and adhesion agents (acetic acid and distilled water) to obtain a thick film paste. It was screen printed on alumina substrate with interdigitated PdAg electrodes and fired at 600 °C for 30 min. Formation of a porous nanocrystalline thick film structure was shown using Scanning electron microscopy (SEM), while Hall measurements enabled determination of carrier mobility. Change of impedance response in the frequency range 42 Hz–1 MHz with humidity was analyzed at room temperature (25 °C) and 50 °C in the relative humidity range 30–90% and 40–90%, respectively. At 42 Hz, and room temperature the impedance reduced ∼28 times, while at 50 °C it reduced ∼147 times in the relative humidity range 40–90%. The sensor showed rapid response (16 s) and relatively low hysteresis (8.39% at 25 °C and 2.64% at 50 °C) showing that this is a promising material for application in humidity sensing.
PB  - Elsevier
T2  - Sensors and Actuators, B: Chemical
T1  - Humidity sensing properties of nanocrystalline pseudobrookite (Fe2TiO5) based thick films
VL  - 277
SP  - 654
EP  - 664
DO  - 10.1016/j.snb.2018.09.063
ER  - 

@article{
author = "Nikolić, Maria Vesna and Vasiljević, Zorka and Luković, Miloljub and Pavlović, Vera P. and Vujancevic, J. and Radovanović, M. and Krstić, Jugoslav and Vlahovic, B. and Pavlović, Vladimir B.",
year = "2018",
abstract = "Pseudobrookite based nanopowder was obtained by solid state synthesis of starting hematite and anatase nanopowders in the weight ratio 55:45. Structural and morphological properties were analyzed using X-ray diffraction (XRD), BET, X-ray photoelectron spectroscopy (XPS), Raman spectroscopy, UV/Vis diffuse reflectance spectroscopy, Field emission scanning electron microscopy (FESEM) and Transmission electron microscopy (TEM) confirming the formation of nanocrystalline pseudobrookite. The obtained powder was mixed with a binder (ethyl cellulose), dispersant (α-terpinol) and adhesion agents (acetic acid and distilled water) to obtain a thick film paste. It was screen printed on alumina substrate with interdigitated PdAg electrodes and fired at 600 °C for 30 min. Formation of a porous nanocrystalline thick film structure was shown using Scanning electron microscopy (SEM), while Hall measurements enabled determination of carrier mobility. Change of impedance response in the frequency range 42 Hz–1 MHz with humidity was analyzed at room temperature (25 °C) and 50 °C in the relative humidity range 30–90% and 40–90%, respectively. At 42 Hz, and room temperature the impedance reduced ∼28 times, while at 50 °C it reduced ∼147 times in the relative humidity range 40–90%. The sensor showed rapid response (16 s) and relatively low hysteresis (8.39% at 25 °C and 2.64% at 50 °C) showing that this is a promising material for application in humidity sensing.",
publisher = "Elsevier",
journal = "Sensors and Actuators, B: Chemical",
title = "Humidity sensing properties of nanocrystalline pseudobrookite (Fe2TiO5) based thick films",
volume = "277",
pages = "654-664",
doi = "10.1016/j.snb.2018.09.063"
}

Nikolić, M. V., Vasiljević, Z., Luković, M., Pavlović, V. P., Vujancevic, J., Radovanović, M., Krstić, J., Vlahovic, B.,& Pavlović, V. B.. (2018). Humidity sensing properties of nanocrystalline pseudobrookite (Fe2TiO5) based thick films. in Sensors and Actuators, B: Chemical
Elsevier., 277, 654-664.
https://doi.org/10.1016/j.snb.2018.09.063

Nikolić MV, Vasiljević Z, Luković M, Pavlović VP, Vujancevic J, Radovanović M, Krstić J, Vlahovic B, Pavlović VB. Humidity sensing properties of nanocrystalline pseudobrookite (Fe2TiO5) based thick films. in Sensors and Actuators, B: Chemical. 2018;277:654-664.
doi:10.1016/j.snb.2018.09.063 .

Nikolić, Maria Vesna, Vasiljević, Zorka, Luković, Miloljub, Pavlović, Vera P., Vujancevic, J., Radovanović, M., Krstić, Jugoslav, Vlahovic, B., Pavlović, Vladimir B., "Humidity sensing properties of nanocrystalline pseudobrookite (Fe2TiO5) based thick films" in Sensors and Actuators, B: Chemical, 277 (2018):654-664,
https://doi.org/10.1016/j.snb.2018.09.063 . .

TY  - CONF
AU  - Labus, Nebojša
AU  - Marković, Smilja B.
AU  - Nikolić, Maria Vesna
AU  - Krstić, Jugoslav
AU  - Pavlović, Vladimir B.
PY  - 2018
UR  - http://dais.sanu.ac.rs/123456789/4099
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/2612
AB  - During the compaction of the powder mixture of ZnO and Mn2O3 (MnCO3) and Fe2O3 compacts were find fragile for further handling. Poly vinyl alcohol PVA was used as a binder in an unusual 20% PVA content. We made as well 2% PVA with 0.6% Poly ethylene glycol PEG and 20% PVA with 6 % PEG. Binder was wrapped over the powder by suspension forming in the polymer water solution and drying afterwards until all water content evaporates. On the these obtained powders employed characterization techniques were: Fourier transformed Infra red FTIR spectra with ATR attenuated total reflection technique as well as differential thermal analysis DTA on the device with low temperature sensitivity and TEM transmition electron microscopy. All binder concentrations gave compacts with good mechanical properties, that can be handled with ease but with adding, a PEG as plasticizer the operating of the anvil and piston were extremely difficult due to friction.
PB  - Belgrade : Serbian Ceramic Society
C3  - Program and the Book of Abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application VII : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 17-19 September 2018
T1  - Polyvinyl alcohol PVA with poly ethylene Glycol PEG added as a binder for the powder compaction
SP  - 83
EP  - 83
UR  - https://hdl.handle.net/21.15107/rcub_dais_4099
ER  - 

@conference{
author = "Labus, Nebojša and Marković, Smilja B. and Nikolić, Maria Vesna and Krstić, Jugoslav and Pavlović, Vladimir B.",
year = "2018",
abstract = "During the compaction of the powder mixture of ZnO and Mn2O3 (MnCO3) and Fe2O3 compacts were find fragile for further handling. Poly vinyl alcohol PVA was used as a binder in an unusual 20% PVA content. We made as well 2% PVA with 0.6% Poly ethylene glycol PEG and 20% PVA with 6 % PEG. Binder was wrapped over the powder by suspension forming in the polymer water solution and drying afterwards until all water content evaporates. On the these obtained powders employed characterization techniques were: Fourier transformed Infra red FTIR spectra with ATR attenuated total reflection technique as well as differential thermal analysis DTA on the device with low temperature sensitivity and TEM transmition electron microscopy. All binder concentrations gave compacts with good mechanical properties, that can be handled with ease but with adding, a PEG as plasticizer the operating of the anvil and piston were extremely difficult due to friction.",
publisher = "Belgrade : Serbian Ceramic Society",
journal = "Program and the Book of Abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application VII : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 17-19 September 2018",
title = "Polyvinyl alcohol PVA with poly ethylene Glycol PEG added as a binder for the powder compaction",
pages = "83-83",
url = "https://hdl.handle.net/21.15107/rcub_dais_4099"
}

Labus, N., Marković, S. B., Nikolić, M. V., Krstić, J.,& Pavlović, V. B.. (2018). Polyvinyl alcohol PVA with poly ethylene Glycol PEG added as a binder for the powder compaction. in Program and the Book of Abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application VII : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 17-19 September 2018
Belgrade : Serbian Ceramic Society., 83-83.
https://hdl.handle.net/21.15107/rcub_dais_4099

Labus N, Marković SB, Nikolić MV, Krstić J, Pavlović VB. Polyvinyl alcohol PVA with poly ethylene Glycol PEG added as a binder for the powder compaction. in Program and the Book of Abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application VII : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 17-19 September 2018. 2018;:83-83.
https://hdl.handle.net/21.15107/rcub_dais_4099 .

Labus, Nebojša, Marković, Smilja B., Nikolić, Maria Vesna, Krstić, Jugoslav, Pavlović, Vladimir B., "Polyvinyl alcohol PVA with poly ethylene Glycol PEG added as a binder for the powder compaction" in Program and the Book of Abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application VII : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 17-19 September 2018 (2018):83-83,
https://hdl.handle.net/21.15107/rcub_dais_4099 .

TY  - CONF
AU  - Labus, Nebojša
AU  - Marković, Smilja B.
AU  - Nikolić, Maria Vesna
AU  - Krstić, Jugoslav
AU  - Pavlović, Vladimir B.
PY  - 2018
UR  - http://dais.sanu.ac.rs/123456789/4065
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/2627
T1  - Poly vinyl alcohol PVA with poly ethylene glycol PEG added as a binder for the powder compaction
UR  - https://hdl.handle.net/21.15107/rcub_dais_4065
ER  - 

@conference{
author = "Labus, Nebojša and Marković, Smilja B. and Nikolić, Maria Vesna and Krstić, Jugoslav and Pavlović, Vladimir B.",
year = "2018",
title = "Poly vinyl alcohol PVA with poly ethylene glycol PEG added as a binder for the powder compaction",
url = "https://hdl.handle.net/21.15107/rcub_dais_4065"
}

Labus, N., Marković, S. B., Nikolić, M. V., Krstić, J.,& Pavlović, V. B.. (2018). Poly vinyl alcohol PVA with poly ethylene glycol PEG added as a binder for the powder compaction. .
https://hdl.handle.net/21.15107/rcub_dais_4065

Labus N, Marković SB, Nikolić MV, Krstić J, Pavlović VB. Poly vinyl alcohol PVA with poly ethylene glycol PEG added as a binder for the powder compaction. 2018;.
https://hdl.handle.net/21.15107/rcub_dais_4065 .

Labus, Nebojša, Marković, Smilja B., Nikolić, Maria Vesna, Krstić, Jugoslav, Pavlović, Vladimir B., "Poly vinyl alcohol PVA with poly ethylene glycol PEG added as a binder for the powder compaction" (2018),
https://hdl.handle.net/21.15107/rcub_dais_4065 .

TY  - JOUR
AU  - Vujković, Milica
AU  - Nedić, Zoran
AU  - Tančić, Pavle
AU  - Aleksić, Obrad
AU  - Nikolić, Maria Vesna
AU  - Mioč, Ubavka
AU  - Mentus, Slavko
PY  - 2016
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/5899
AB  - Monophosphate bronze (PW8O26, WPB) was synthesized by low-temperature (650 °C) heating of 12-tungstophosphoric acid (WPA). Its lithiated derivative with a low lithium content (Li3-WPB) was synthesized by heating lithium salt of WPA at 650 °C. Its lithiated derivative with a high lithium content was synthesized by mechanochemical lithiation of Li3WPB (Li n -WPB) (n > 3), followed by heat treatment at 650 °C. X-ray powder diffraction analysis confirmed that the bronze structure changed with the increase of the incorporated lithium content. These bronzes were investigated from the aspect of lithiation/delithiation kinetics in an aqueous saturated LiNO3 electrolyte solution. By cyclic voltammetry, both the kinetics of intercalation/deintercalation and the coulombic capacity were found to decrease with the increase of initial lithium content, in agreement with literature data for electrochemically lithiated tungstophosphate bronzes. Monoclinic lithium-free bronze PW8O26, as the most promising material, was subjected to a further detailed galvanostatic investigation coupled with the LiFe0.95V0.05PO4/C composite as a cathode material in an aqueous battery. In comparison to its behavior in an organic electrolyte, a considerably lower initial capacity of the bronze electrode was measured. However, its cyclic stability was much better in an aqueous than in an organic electrolyte.
PB  - Springer
T2  - Journal of Materials Science
T1  - Electrochemical lithiation/delithiation kinetics and capacity of phosphate tungsten bronze and its chemically pre-lithiated derivatives in aqueous solutions
VL  - 51
IS  - 5
SP  - 2481
EP  - 2489
DO  - 10.1007/s10853-015-9560-5
ER  - 

@article{
author = "Vujković, Milica and Nedić, Zoran and Tančić, Pavle and Aleksić, Obrad and Nikolić, Maria Vesna and Mioč, Ubavka and Mentus, Slavko",
year = "2016",
abstract = "Monophosphate bronze (PW8O26, WPB) was synthesized by low-temperature (650 °C) heating of 12-tungstophosphoric acid (WPA). Its lithiated derivative with a low lithium content (Li3-WPB) was synthesized by heating lithium salt of WPA at 650 °C. Its lithiated derivative with a high lithium content was synthesized by mechanochemical lithiation of Li3WPB (Li n -WPB) (n > 3), followed by heat treatment at 650 °C. X-ray powder diffraction analysis confirmed that the bronze structure changed with the increase of the incorporated lithium content. These bronzes were investigated from the aspect of lithiation/delithiation kinetics in an aqueous saturated LiNO3 electrolyte solution. By cyclic voltammetry, both the kinetics of intercalation/deintercalation and the coulombic capacity were found to decrease with the increase of initial lithium content, in agreement with literature data for electrochemically lithiated tungstophosphate bronzes. Monoclinic lithium-free bronze PW8O26, as the most promising material, was subjected to a further detailed galvanostatic investigation coupled with the LiFe0.95V0.05PO4/C composite as a cathode material in an aqueous battery. In comparison to its behavior in an organic electrolyte, a considerably lower initial capacity of the bronze electrode was measured. However, its cyclic stability was much better in an aqueous than in an organic electrolyte.",
publisher = "Springer",
journal = "Journal of Materials Science",
title = "Electrochemical lithiation/delithiation kinetics and capacity of phosphate tungsten bronze and its chemically pre-lithiated derivatives in aqueous solutions",
volume = "51",
number = "5",
pages = "2481-2489",
doi = "10.1007/s10853-015-9560-5"
}

Vujković, M., Nedić, Z., Tančić, P., Aleksić, O., Nikolić, M. V., Mioč, U.,& Mentus, S.. (2016). Electrochemical lithiation/delithiation kinetics and capacity of phosphate tungsten bronze and its chemically pre-lithiated derivatives in aqueous solutions. in Journal of Materials Science
Springer., 51(5), 2481-2489.
https://doi.org/10.1007/s10853-015-9560-5

Vujković M, Nedić Z, Tančić P, Aleksić O, Nikolić MV, Mioč U, Mentus S. Electrochemical lithiation/delithiation kinetics and capacity of phosphate tungsten bronze and its chemically pre-lithiated derivatives in aqueous solutions. in Journal of Materials Science. 2016;51(5):2481-2489.
doi:10.1007/s10853-015-9560-5 .

Vujković, Milica, Nedić, Zoran, Tančić, Pavle, Aleksić, Obrad, Nikolić, Maria Vesna, Mioč, Ubavka, Mentus, Slavko, "Electrochemical lithiation/delithiation kinetics and capacity of phosphate tungsten bronze and its chemically pre-lithiated derivatives in aqueous solutions" in Journal of Materials Science, 51, no. 5 (2016):2481-2489,
https://doi.org/10.1007/s10853-015-9560-5 . .

TY  - CONF
AU  - Vasiljević, Zorka
AU  - Vasiljević-Radović, Dana
AU  - Nikolić, Maria Vesna
AU  - Labus, Nebojša
PY  - 2015
UR  - http://dais.sanu.ac.rs/123456789/15426
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/2865
AB  - Metastabile nanopowder ZnTiO3 pressed into cylindrical compacts at 200 MPa was submitted to conventional heating with isothermal holding at 931oC for 10 minutes, 25 minutes and 40 minutes. Same compacts were heated with two-step sintering schedule with maximal 912oC and isothermal holding at 896oC, for approximately the same holding times as with isothermal. Shrinkage during heating was monitored with dilatometric device, while microstructure was determined with atomic force microscopy. XRD patterns were collected for the most prominent samples. Sintered specimens microstructure showed differences introduced during last sintering stage by two heating schedules.
PB  - Belgrade : Institute for Multidisciplinary Research, University of Belgrade
C3  - Programme and the Book of Abstracts / 3rd Conference of the Serbian Society for Ceramic Materials, 3CSCS-2015, June 15-17, 2015, Belgrade, Serbia
T1  - Two step sintering of the ZnTiO3 nanopowder
SP  - 101
EP  - 101
UR  - https://hdl.handle.net/21.15107/rcub_dais_15426
ER  - 

@conference{
author = "Vasiljević, Zorka and Vasiljević-Radović, Dana and Nikolić, Maria Vesna and Labus, Nebojša",
year = "2015",
abstract = "Metastabile nanopowder ZnTiO3 pressed into cylindrical compacts at 200 MPa was submitted to conventional heating with isothermal holding at 931oC for 10 minutes, 25 minutes and 40 minutes. Same compacts were heated with two-step sintering schedule with maximal 912oC and isothermal holding at 896oC, for approximately the same holding times as with isothermal. Shrinkage during heating was monitored with dilatometric device, while microstructure was determined with atomic force microscopy. XRD patterns were collected for the most prominent samples. Sintered specimens microstructure showed differences introduced during last sintering stage by two heating schedules.",
publisher = "Belgrade : Institute for Multidisciplinary Research, University of Belgrade",
journal = "Programme and the Book of Abstracts / 3rd Conference of the Serbian Society for Ceramic Materials, 3CSCS-2015, June 15-17, 2015, Belgrade, Serbia",
title = "Two step sintering of the ZnTiO3 nanopowder",
pages = "101-101",
url = "https://hdl.handle.net/21.15107/rcub_dais_15426"
}

Vasiljević, Z., Vasiljević-Radović, D., Nikolić, M. V.,& Labus, N.. (2015). Two step sintering of the ZnTiO3 nanopowder. in Programme and the Book of Abstracts / 3rd Conference of the Serbian Society for Ceramic Materials, 3CSCS-2015, June 15-17, 2015, Belgrade, Serbia
Belgrade : Institute for Multidisciplinary Research, University of Belgrade., 101-101.
https://hdl.handle.net/21.15107/rcub_dais_15426

Vasiljević Z, Vasiljević-Radović D, Nikolić MV, Labus N. Two step sintering of the ZnTiO3 nanopowder. in Programme and the Book of Abstracts / 3rd Conference of the Serbian Society for Ceramic Materials, 3CSCS-2015, June 15-17, 2015, Belgrade, Serbia. 2015;:101-101.
https://hdl.handle.net/21.15107/rcub_dais_15426 .

Vasiljević, Zorka, Vasiljević-Radović, Dana, Nikolić, Maria Vesna, Labus, Nebojša, "Two step sintering of the ZnTiO3 nanopowder" in Programme and the Book of Abstracts / 3rd Conference of the Serbian Society for Ceramic Materials, 3CSCS-2015, June 15-17, 2015, Belgrade, Serbia (2015):101-101,
https://hdl.handle.net/21.15107/rcub_dais_15426 .

TY  - CONF
AU  - Labus, Nebojša
AU  - Krstić, Jugoslav
AU  - Peleš, Adriana
AU  - Živojinović, Jelena
AU  - Nikolić, Maria Vesna
PY  - 2013
UR  - http://dais.sanu.ac.rs/123456789/411
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/4279
AB  - Nanopowder density, as well as compact density, is due to powder particle size, different in their values, compared to micron powders. Also, the technique used for density determination induces large mutual value discrepancies. Scanning electron micrographs of as received powder are presented as an illustration of the shape and size of powder particles and agglomerates. The density of the loose powder pretreated differently was determined using mercury porosimetry and He pycnometry. The methods used for determining the apparent density of the compacts were pycnometry with water as the wetting liquid, mercury porosimetry and also a new approach using a combination of mercury pycnometry along with nitrogen adsorption. Bulk densities of compacts were determined by dimension measurement and mercury pycnometry. Conclusions about nanopowder usage as a charge for dry compaction as well as the most appropriate way for the determination of compact and powder densities are shown.
PB  - Belgrade : Serbian Ceramic Society
C3  - Advanced Ceramics and Application : new frontiers in multifunctional material science and processing : program and the book of abstracts : II Serbian Ceramic Society Conference, Sep 30th-Oct 1st, 2013, Belgrade
T1  - Density of the ZnTiO3 nanopowder as a loose powder and as a compact obtained by different methods
SP  - 18
EP  - 18
UR  - https://hdl.handle.net/21.15107/rcub_dais_411
ER  - 

@conference{
author = "Labus, Nebojša and Krstić, Jugoslav and Peleš, Adriana and Živojinović, Jelena and Nikolić, Maria Vesna",
year = "2013",
abstract = "Nanopowder density, as well as compact density, is due to powder particle size, different in their values, compared to micron powders. Also, the technique used for density determination induces large mutual value discrepancies. Scanning electron micrographs of as received powder are presented as an illustration of the shape and size of powder particles and agglomerates. The density of the loose powder pretreated differently was determined using mercury porosimetry and He pycnometry. The methods used for determining the apparent density of the compacts were pycnometry with water as the wetting liquid, mercury porosimetry and also a new approach using a combination of mercury pycnometry along with nitrogen adsorption. Bulk densities of compacts were determined by dimension measurement and mercury pycnometry. Conclusions about nanopowder usage as a charge for dry compaction as well as the most appropriate way for the determination of compact and powder densities are shown.",
publisher = "Belgrade : Serbian Ceramic Society",
journal = "Advanced Ceramics and Application : new frontiers in multifunctional material science and processing : program and the book of abstracts : II Serbian Ceramic Society Conference, Sep 30th-Oct 1st, 2013, Belgrade",
title = "Density of the ZnTiO3 nanopowder as a loose powder and as a compact obtained by different methods",
pages = "18-18",
url = "https://hdl.handle.net/21.15107/rcub_dais_411"
}

Labus, N., Krstić, J., Peleš, A., Živojinović, J.,& Nikolić, M. V.. (2013). Density of the ZnTiO3 nanopowder as a loose powder and as a compact obtained by different methods. in Advanced Ceramics and Application : new frontiers in multifunctional material science and processing : program and the book of abstracts : II Serbian Ceramic Society Conference, Sep 30th-Oct 1st, 2013, Belgrade
Belgrade : Serbian Ceramic Society., 18-18.
https://hdl.handle.net/21.15107/rcub_dais_411

Labus N, Krstić J, Peleš A, Živojinović J, Nikolić MV. Density of the ZnTiO3 nanopowder as a loose powder and as a compact obtained by different methods. in Advanced Ceramics and Application : new frontiers in multifunctional material science and processing : program and the book of abstracts : II Serbian Ceramic Society Conference, Sep 30th-Oct 1st, 2013, Belgrade. 2013;:18-18.
https://hdl.handle.net/21.15107/rcub_dais_411 .

Labus, Nebojša, Krstić, Jugoslav, Peleš, Adriana, Živojinović, Jelena, Nikolić, Maria Vesna, "Density of the ZnTiO3 nanopowder as a loose powder and as a compact obtained by different methods" in Advanced Ceramics and Application : new frontiers in multifunctional material science and processing : program and the book of abstracts : II Serbian Ceramic Society Conference, Sep 30th-Oct 1st, 2013, Belgrade (2013):18-18,
https://hdl.handle.net/21.15107/rcub_dais_411 .

TY  - JOUR
AU  - Labus, Nebojša
AU  - Krstić, Jugoslav
AU  - Marković, Smilja B.
AU  - Vasiljević-Radović, Dana
AU  - Nikolić, Maria Vesna
AU  - Pavlovic, V.
PY  - 2013
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/1184
AB  - ZnTiO3 nanopowder as a constitutive component in compact production was primarily characterized. Scanning electron micrographs of as received powder were recorded. Mercury porosimetry and nitrogen adsorption were also performed on loose powder. Particle size distribution in a water powder suspension was determined with a laser particle size analyser. Compaction was performed on different pressures in a range from 100 to 400 MPa using the uniaxial double sided compaction technique without binder and lubricant. Micrographs of compacted specimens were obtained using scanning electron microscopy and atomic force microscopy. Pore size distribution was also determined by mercury porosimetry and nitrogen adsorption. Results revealed that with increasing pressure during compaction interagglomerate pores diminish in size until they reach some critical diameter related to the intra-agglomerate pore size.
AB  - ZnTiO3 nanoprah predstavlja materijal koji se koristi pri procesu presovanja i karakterisan je nepresovan i netretiran posebno. Snimljene su skanirajuće elektronske mikrografije praha. Metode živine porozimetrije i adsorpcije azota takođe su primenjene na prahu. Raspodela veličine čestica praha u vodenoj suspenziji određena je laserskim meračem veličine čestica. Presovanje je rađeno tehnikom jednoosnog dvostranog presovanja u opsegu pritisaka od 100 do 400 MPa bez korišćenja veziva i podmazivača. Mikrografije ispresaka dobijene su skanirajućom elektronskom mikroskopijom i mikroskopijom međuatomske interakcije. Raspodela veličine pora određena je živinom porozimetrijom kao i adsorpcijom azota. Rezultati su pokazali da se sa povećanjem pritiska tokom presovanja pore između aglomerata smanjuju dok ne dosegnu neki kritični prečnik koji odgovara veličini pora unutar aglomerata.
PB  - International Institute for the Science of Sintering, Beograd
T2  - Science of Sintering
T1  - ZnTiO3 ceramic nanopowder microstructure changes during compaction
VL  - 45
IS  - 2
SP  - 209
EP  - 221
DO  - 10.2298/SOS1302209L
ER  - 

@article{
author = "Labus, Nebojša and Krstić, Jugoslav and Marković, Smilja B. and Vasiljević-Radović, Dana and Nikolić, Maria Vesna and Pavlovic, V.",
year = "2013",
abstract = "ZnTiO3 nanopowder as a constitutive component in compact production was primarily characterized. Scanning electron micrographs of as received powder were recorded. Mercury porosimetry and nitrogen adsorption were also performed on loose powder. Particle size distribution in a water powder suspension was determined with a laser particle size analyser. Compaction was performed on different pressures in a range from 100 to 400 MPa using the uniaxial double sided compaction technique without binder and lubricant. Micrographs of compacted specimens were obtained using scanning electron microscopy and atomic force microscopy. Pore size distribution was also determined by mercury porosimetry and nitrogen adsorption. Results revealed that with increasing pressure during compaction interagglomerate pores diminish in size until they reach some critical diameter related to the intra-agglomerate pore size., ZnTiO3 nanoprah predstavlja materijal koji se koristi pri procesu presovanja i karakterisan je nepresovan i netretiran posebno. Snimljene su skanirajuće elektronske mikrografije praha. Metode živine porozimetrije i adsorpcije azota takođe su primenjene na prahu. Raspodela veličine čestica praha u vodenoj suspenziji određena je laserskim meračem veličine čestica. Presovanje je rađeno tehnikom jednoosnog dvostranog presovanja u opsegu pritisaka od 100 do 400 MPa bez korišćenja veziva i podmazivača. Mikrografije ispresaka dobijene su skanirajućom elektronskom mikroskopijom i mikroskopijom međuatomske interakcije. Raspodela veličine pora određena je živinom porozimetrijom kao i adsorpcijom azota. Rezultati su pokazali da se sa povećanjem pritiska tokom presovanja pore između aglomerata smanjuju dok ne dosegnu neki kritični prečnik koji odgovara veličini pora unutar aglomerata.",
publisher = "International Institute for the Science of Sintering, Beograd",
journal = "Science of Sintering",
title = "ZnTiO3 ceramic nanopowder microstructure changes during compaction",
volume = "45",
number = "2",
pages = "209-221",
doi = "10.2298/SOS1302209L"
}

Labus, N., Krstić, J., Marković, S. B., Vasiljević-Radović, D., Nikolić, M. V.,& Pavlovic, V.. (2013). ZnTiO3 ceramic nanopowder microstructure changes during compaction. in Science of Sintering
International Institute for the Science of Sintering, Beograd., 45(2), 209-221.
https://doi.org/10.2298/SOS1302209L

Labus N, Krstić J, Marković SB, Vasiljević-Radović D, Nikolić MV, Pavlovic V. ZnTiO3 ceramic nanopowder microstructure changes during compaction. in Science of Sintering. 2013;45(2):209-221.
doi:10.2298/SOS1302209L .

Labus, Nebojša, Krstić, Jugoslav, Marković, Smilja B., Vasiljević-Radović, Dana, Nikolić, Maria Vesna, Pavlovic, V., "ZnTiO3 ceramic nanopowder microstructure changes during compaction" in Science of Sintering, 45, no. 2 (2013):209-221,
https://doi.org/10.2298/SOS1302209L . .

TY  - JOUR
AU  - Nikolic, P. M.
AU  - Paraskevopoulos, Konstantinos M.
AU  - Aleksić, Obrad S.
AU  - Vujatovic, S. S.
AU  - Vasiljević-Radović, Dana
AU  - Zorba, T. T.
AU  - Blagojevic, V.
AU  - Nikolic, N.
AU  - Radovanović, M.
AU  - Nikolić, Maria Vesna
PY  - 2012
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/942
AB  - Single crystal samples of PbTe doped with PbI2 were made using the Bridgman technique. Far infrared reflectivity diagrams of PbTe doped with 0.4 at% and 0.6 at% Iodine were measured and numerically analyzed. A plasma resonance at about 650 cm(-1) with the reflectivity minima very close to zero was observed for both samples. Thermal diffusivity was determined for the same samples using the photoacoustic method with a transmission detection configuration and the values of the minority free carrier (holes) mobility were calculated.
PB  - National Institute of Optoelectronics
T2  - Optoelectronics and Advanced Materials, Rapid Communications
T1  - Far infrared and photoacoustic characterization of iodine doped PbTe
VL  - 6
IS  - 3-4
SP  - 352
EP  - 356
UR  - https://hdl.handle.net/21.15107/rcub_cer_942
ER  - 

@article{
author = "Nikolic, P. M. and Paraskevopoulos, Konstantinos M. and Aleksić, Obrad S. and Vujatovic, S. S. and Vasiljević-Radović, Dana and Zorba, T. T. and Blagojevic, V. and Nikolic, N. and Radovanović, M. and Nikolić, Maria Vesna",
year = "2012",
abstract = "Single crystal samples of PbTe doped with PbI2 were made using the Bridgman technique. Far infrared reflectivity diagrams of PbTe doped with 0.4 at% and 0.6 at% Iodine were measured and numerically analyzed. A plasma resonance at about 650 cm(-1) with the reflectivity minima very close to zero was observed for both samples. Thermal diffusivity was determined for the same samples using the photoacoustic method with a transmission detection configuration and the values of the minority free carrier (holes) mobility were calculated.",
publisher = "National Institute of Optoelectronics",
journal = "Optoelectronics and Advanced Materials, Rapid Communications",
title = "Far infrared and photoacoustic characterization of iodine doped PbTe",
volume = "6",
number = "3-4",
pages = "352-356",
url = "https://hdl.handle.net/21.15107/rcub_cer_942"
}

Nikolic, P. M., Paraskevopoulos, K. M., Aleksić, O. S., Vujatovic, S. S., Vasiljević-Radović, D., Zorba, T. T., Blagojevic, V., Nikolic, N., Radovanović, M.,& Nikolić, M. V.. (2012). Far infrared and photoacoustic characterization of iodine doped PbTe. in Optoelectronics and Advanced Materials, Rapid Communications
National Institute of Optoelectronics., 6(3-4), 352-356.
https://hdl.handle.net/21.15107/rcub_cer_942

Nikolic PM, Paraskevopoulos KM, Aleksić OS, Vujatovic SS, Vasiljević-Radović D, Zorba TT, Blagojevic V, Nikolic N, Radovanović M, Nikolić MV. Far infrared and photoacoustic characterization of iodine doped PbTe. in Optoelectronics and Advanced Materials, Rapid Communications. 2012;6(3-4):352-356.
https://hdl.handle.net/21.15107/rcub_cer_942 .

Nikolic, P. M., Paraskevopoulos, Konstantinos M., Aleksić, Obrad S., Vujatovic, S. S., Vasiljević-Radović, Dana, Zorba, T. T., Blagojevic, V., Nikolic, N., Radovanović, M., Nikolić, Maria Vesna, "Far infrared and photoacoustic characterization of iodine doped PbTe" in Optoelectronics and Advanced Materials, Rapid Communications, 6, no. 3-4 (2012):352-356,
https://hdl.handle.net/21.15107/rcub_cer_942 .

TY  - JOUR
AU  - Nikolic, P. M.
AU  - Paraskevopoulos, Konstantinos M.
AU  - Zachariadis, G.
AU  - Valasiadis, O.
AU  - Zorba, T. T.
AU  - Vujatovic, S. S.
AU  - Nikolic, N.
AU  - Aleksić, Obrad S.
AU  - Ivetic, T.
AU  - Cvetković, Olga
AU  - Blagojevic, V.
AU  - Nikolić, Maria Vesna
PY  - 2012
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/1007
AB  - PbTe single crystals, doped with B, were grown using the Bridgman method. Far infrared spectra were measured in the temperature range between 10 K and room temperature. The experimental spectra were numerically analyzed, and optical parameters were calculated. Local impurity modes of boron were observed at about 150 and 240 cm(-1). For all samples, after FIR measurements, the content of boron was measured using inductively coupled plasma atomic emission spectrometry. Optical mobility of free carriers was calculated and it was the highest for the sample with only 0.014 at.% of boron in PbTe. A negative photoconductivity effect at 130 K for PbTe + B was also observed.
PB  - Springer, New York
T2  - Journal of Materials Science
T1  - Far infrared study of local impurity modes of Boron-doped PbTe
VL  - 47
IS  - 5
SP  - 2384
EP  - 2389
DO  - 10.1007/s10853-011-6057-8
ER  - 

@article{
author = "Nikolic, P. M. and Paraskevopoulos, Konstantinos M. and Zachariadis, G. and Valasiadis, O. and Zorba, T. T. and Vujatovic, S. S. and Nikolic, N. and Aleksić, Obrad S. and Ivetic, T. and Cvetković, Olga and Blagojevic, V. and Nikolić, Maria Vesna",
year = "2012",
abstract = "PbTe single crystals, doped with B, were grown using the Bridgman method. Far infrared spectra were measured in the temperature range between 10 K and room temperature. The experimental spectra were numerically analyzed, and optical parameters were calculated. Local impurity modes of boron were observed at about 150 and 240 cm(-1). For all samples, after FIR measurements, the content of boron was measured using inductively coupled plasma atomic emission spectrometry. Optical mobility of free carriers was calculated and it was the highest for the sample with only 0.014 at.% of boron in PbTe. A negative photoconductivity effect at 130 K for PbTe + B was also observed.",
publisher = "Springer, New York",
journal = "Journal of Materials Science",
title = "Far infrared study of local impurity modes of Boron-doped PbTe",
volume = "47",
number = "5",
pages = "2384-2389",
doi = "10.1007/s10853-011-6057-8"
}

Nikolic, P. M., Paraskevopoulos, K. M., Zachariadis, G., Valasiadis, O., Zorba, T. T., Vujatovic, S. S., Nikolic, N., Aleksić, O. S., Ivetic, T., Cvetković, O., Blagojevic, V.,& Nikolić, M. V.. (2012). Far infrared study of local impurity modes of Boron-doped PbTe. in Journal of Materials Science
Springer, New York., 47(5), 2384-2389.
https://doi.org/10.1007/s10853-011-6057-8

Nikolic PM, Paraskevopoulos KM, Zachariadis G, Valasiadis O, Zorba TT, Vujatovic SS, Nikolic N, Aleksić OS, Ivetic T, Cvetković O, Blagojevic V, Nikolić MV. Far infrared study of local impurity modes of Boron-doped PbTe. in Journal of Materials Science. 2012;47(5):2384-2389.
doi:10.1007/s10853-011-6057-8 .

Nikolic, P. M., Paraskevopoulos, Konstantinos M., Zachariadis, G., Valasiadis, O., Zorba, T. T., Vujatovic, S. S., Nikolic, N., Aleksić, Obrad S., Ivetic, T., Cvetković, Olga, Blagojevic, V., Nikolić, Maria Vesna, "Far infrared study of local impurity modes of Boron-doped PbTe" in Journal of Materials Science, 47, no. 5 (2012):2384-2389,
https://doi.org/10.1007/s10853-011-6057-8 . .

TY  - CONF
AU  - Nikolić, Maria Vesna
AU  - Aleksić, Obrad S.
AU  - Vasiljević-Radović, Dana
AU  - Nikolic, N.
PY  - 2012
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/1150
UR  - https://www.epma.com/publications/euro-pm-proceedings/product/ep12442
AB  - Multipolar anisotropy was induced in strontium hexaferrite green samples in a high intensity magnetic field during feedstock injection by PIM (powder injection molding) technology. Strontium hexaferrite particles in the melted feedstock were multipolarly aligned into four semi-circular paths that were circularly closed through a multipolar electromagnet. After debinding (with acetone and thermally) and sintering (optimized to obtain maximal values of the (BH)max product), samples were multipolarly magnetized again to form four poles on the outer surface of the sample. Multipolar anisotropy of the samples was observed and analyzed in detail by SEM and AFM (crystalline alignment) and by MFM (magnetical alignment).
C3  - Proceedings of the International  Euro Powder Metallurgy Congress and Exhibition, Euro PM 2012
T1  - Multipolar anisotropy and domain semicircular alignment in sintered strontium hexaferrite shaped by PIM technology
VL  - 3
UR  - https://hdl.handle.net/21.15107/rcub_cer_1150
ER  - 

@conference{
author = "Nikolić, Maria Vesna and Aleksić, Obrad S. and Vasiljević-Radović, Dana and Nikolic, N.",
year = "2012",
abstract = "Multipolar anisotropy was induced in strontium hexaferrite green samples in a high intensity magnetic field during feedstock injection by PIM (powder injection molding) technology. Strontium hexaferrite particles in the melted feedstock were multipolarly aligned into four semi-circular paths that were circularly closed through a multipolar electromagnet. After debinding (with acetone and thermally) and sintering (optimized to obtain maximal values of the (BH)max product), samples were multipolarly magnetized again to form four poles on the outer surface of the sample. Multipolar anisotropy of the samples was observed and analyzed in detail by SEM and AFM (crystalline alignment) and by MFM (magnetical alignment).",
journal = "Proceedings of the International  Euro Powder Metallurgy Congress and Exhibition, Euro PM 2012",
title = "Multipolar anisotropy and domain semicircular alignment in sintered strontium hexaferrite shaped by PIM technology",
volume = "3",
url = "https://hdl.handle.net/21.15107/rcub_cer_1150"
}

Nikolić, M. V., Aleksić, O. S., Vasiljević-Radović, D.,& Nikolic, N.. (2012). Multipolar anisotropy and domain semicircular alignment in sintered strontium hexaferrite shaped by PIM technology. in Proceedings of the International  Euro Powder Metallurgy Congress and Exhibition, Euro PM 2012, 3.
https://hdl.handle.net/21.15107/rcub_cer_1150

Nikolić MV, Aleksić OS, Vasiljević-Radović D, Nikolic N. Multipolar anisotropy and domain semicircular alignment in sintered strontium hexaferrite shaped by PIM technology. in Proceedings of the International  Euro Powder Metallurgy Congress and Exhibition, Euro PM 2012. 2012;3.
https://hdl.handle.net/21.15107/rcub_cer_1150 .

Nikolić, Maria Vesna, Aleksić, Obrad S., Vasiljević-Radović, Dana, Nikolic, N., "Multipolar anisotropy and domain semicircular alignment in sintered strontium hexaferrite shaped by PIM technology" in Proceedings of the International  Euro Powder Metallurgy Congress and Exhibition, Euro PM 2012, 3 (2012),
https://hdl.handle.net/21.15107/rcub_cer_1150 .

TY  - JOUR
AU  - Nikolic, P. M.
AU  - Paraskevopoulos, Konstantinos M.
AU  - Pavlidou, E.
AU  - Zorba, T. T.
AU  - Ivetic, T.
AU  - Vujatovic, S. S.
AU  - Aleksić, Obrad S.
AU  - Nikolic, N.
AU  - Cvetković, Olga
AU  - Blagojevic, V.
AU  - Nikolić, Maria Vesna
PY  - 2011
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/926
AB  - Far infrared reflectivity spectra of polycrystalline In1-xGaxSb were measured and numerically analyzed using the classical dispersion formula and also a fitting procedure based on the modified plasmon-phonon interaction model in the temperature range from 10 K to 300 K. Optical parameters were calculated and discussed. A local mode belonging to the GaSb rich end and two-mode behavior were observed at low temperatures.
PB  - Elsevier Science Sa, Lausanne
T2  - Materials Chemistry and Physics
T1  - Temperature dependence of In1-xGaxSb reflectivity in the far infrared
VL  - 125
IS  - 1-2
SP  - 72
EP  - 76
DO  - 10.1016/j.matchemphys.2010.08.073
ER  - 

@article{
author = "Nikolic, P. M. and Paraskevopoulos, Konstantinos M. and Pavlidou, E. and Zorba, T. T. and Ivetic, T. and Vujatovic, S. S. and Aleksić, Obrad S. and Nikolic, N. and Cvetković, Olga and Blagojevic, V. and Nikolić, Maria Vesna",
year = "2011",
abstract = "Far infrared reflectivity spectra of polycrystalline In1-xGaxSb were measured and numerically analyzed using the classical dispersion formula and also a fitting procedure based on the modified plasmon-phonon interaction model in the temperature range from 10 K to 300 K. Optical parameters were calculated and discussed. A local mode belonging to the GaSb rich end and two-mode behavior were observed at low temperatures.",
publisher = "Elsevier Science Sa, Lausanne",
journal = "Materials Chemistry and Physics",
title = "Temperature dependence of In1-xGaxSb reflectivity in the far infrared",
volume = "125",
number = "1-2",
pages = "72-76",
doi = "10.1016/j.matchemphys.2010.08.073"
}

Nikolic, P. M., Paraskevopoulos, K. M., Pavlidou, E., Zorba, T. T., Ivetic, T., Vujatovic, S. S., Aleksić, O. S., Nikolic, N., Cvetković, O., Blagojevic, V.,& Nikolić, M. V.. (2011). Temperature dependence of In1-xGaxSb reflectivity in the far infrared. in Materials Chemistry and Physics
Elsevier Science Sa, Lausanne., 125(1-2), 72-76.
https://doi.org/10.1016/j.matchemphys.2010.08.073

Nikolic PM, Paraskevopoulos KM, Pavlidou E, Zorba TT, Ivetic T, Vujatovic SS, Aleksić OS, Nikolic N, Cvetković O, Blagojevic V, Nikolić MV. Temperature dependence of In1-xGaxSb reflectivity in the far infrared. in Materials Chemistry and Physics. 2011;125(1-2):72-76.
doi:10.1016/j.matchemphys.2010.08.073 .

Nikolic, P. M., Paraskevopoulos, Konstantinos M., Pavlidou, E., Zorba, T. T., Ivetic, T., Vujatovic, S. S., Aleksić, Obrad S., Nikolic, N., Cvetković, Olga, Blagojevic, V., Nikolić, Maria Vesna, "Temperature dependence of In1-xGaxSb reflectivity in the far infrared" in Materials Chemistry and Physics, 125, no. 1-2 (2011):72-76,
https://doi.org/10.1016/j.matchemphys.2010.08.073 . .

TY  - JOUR
AU  - Nikolic, P. M.
AU  - Vujatovic, S. S.
AU  - Ivetic, T.
AU  - Nikolić, Maria Vesna
AU  - Cvetković, Olga
AU  - Aleksić, Obrad S.
AU  - Blagojevic, V.
AU  - Branković, Goran
AU  - Nikolic, N.
PY  - 2010
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/636
AB  - A single crystal Bi0.9Sb0.1 ingot was synthesized using the Bridgman technique. Thermal diffusivity and electronic transport properties of single crystal cleaved plates (00l) were determined from PA photoacoustic phase and amplitude spectra obtained using the photoacoustic method with a transmission detection configuration. Both the PA phase and amplitude were measured versus the modulation frequency and numerically analyzed. EDS analyses done to determine chemical composition of the studied samples as well as to check sample homogeneity. Hall effect measurements data were used for the photoacustic measurements.
AB  - Monokristalni ingot Bi0.9Sb0.1 sastava je sisntetisan Brižmanovom tehnikom. Toplotna difuzivnost i elektronske transportne osobine pločice monokrisatala sečene paralelno plosni (00l) određene su iz fotoakustičnih (PA) spektara amplituda i faza primenom metoda fotoakustike za transmisionu detekciju. PA faze i amplitude merene su sa promenom modulacione frekvencije i numerički analizirane. Mikrohemijskom elektronskom analizom EDS metodom određen je hemijski sastav i homogenost uzoraka. Podaci merenja holovog efekta korišćeni su kao polazni parametri za utačnjavanje fotoakustičnih dijagrama.
PB  - International Institute for the Science of Sintering, Beograd
T2  - Science of Sintering
T1  - Thermal diffusivity of single crystal Bi0.9Sb0.1
VL  - 42
IS  - 1
SP  - 45
EP  - 50
DO  - 10.2298/SOS1001045N
ER  - 

@article{
author = "Nikolic, P. M. and Vujatovic, S. S. and Ivetic, T. and Nikolić, Maria Vesna and Cvetković, Olga and Aleksić, Obrad S. and Blagojevic, V. and Branković, Goran and Nikolic, N.",
year = "2010",
abstract = "A single crystal Bi0.9Sb0.1 ingot was synthesized using the Bridgman technique. Thermal diffusivity and electronic transport properties of single crystal cleaved plates (00l) were determined from PA photoacoustic phase and amplitude spectra obtained using the photoacoustic method with a transmission detection configuration. Both the PA phase and amplitude were measured versus the modulation frequency and numerically analyzed. EDS analyses done to determine chemical composition of the studied samples as well as to check sample homogeneity. Hall effect measurements data were used for the photoacustic measurements., Monokristalni ingot Bi0.9Sb0.1 sastava je sisntetisan Brižmanovom tehnikom. Toplotna difuzivnost i elektronske transportne osobine pločice monokrisatala sečene paralelno plosni (00l) određene su iz fotoakustičnih (PA) spektara amplituda i faza primenom metoda fotoakustike za transmisionu detekciju. PA faze i amplitude merene su sa promenom modulacione frekvencije i numerički analizirane. Mikrohemijskom elektronskom analizom EDS metodom određen je hemijski sastav i homogenost uzoraka. Podaci merenja holovog efekta korišćeni su kao polazni parametri za utačnjavanje fotoakustičnih dijagrama.",
publisher = "International Institute for the Science of Sintering, Beograd",
journal = "Science of Sintering",
title = "Thermal diffusivity of single crystal Bi0.9Sb0.1",
volume = "42",
number = "1",
pages = "45-50",
doi = "10.2298/SOS1001045N"
}

Nikolic, P. M., Vujatovic, S. S., Ivetic, T., Nikolić, M. V., Cvetković, O., Aleksić, O. S., Blagojevic, V., Branković, G.,& Nikolic, N.. (2010). Thermal diffusivity of single crystal Bi0.9Sb0.1. in Science of Sintering
International Institute for the Science of Sintering, Beograd., 42(1), 45-50.
https://doi.org/10.2298/SOS1001045N

Nikolic PM, Vujatovic SS, Ivetic T, Nikolić MV, Cvetković O, Aleksić OS, Blagojevic V, Branković G, Nikolic N. Thermal diffusivity of single crystal Bi0.9Sb0.1. in Science of Sintering. 2010;42(1):45-50.
doi:10.2298/SOS1001045N .

Nikolic, P. M., Vujatovic, S. S., Ivetic, T., Nikolić, Maria Vesna, Cvetković, Olga, Aleksić, Obrad S., Blagojevic, V., Branković, Goran, Nikolic, N., "Thermal diffusivity of single crystal Bi0.9Sb0.1" in Science of Sintering, 42, no. 1 (2010):45-50,
https://doi.org/10.2298/SOS1001045N . .

TY  - JOUR
AU  - Ivetić, T.
AU  - Vuković, Zorica
AU  - Nikolić, Maria Vesna
AU  - Pavlović, Vladimir B.
AU  - Nikolić, J.R.
AU  - Minić, D.
AU  - Ristić, M.M.
PY  - 2008
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/462
AB  - Powder mixtures of zinc oxide and tin oxide in the molar ratio, ZnO:SnO2 = 2:1, were mechanically activated in a planetary ball mill in the time intervals of 0-160 min. The adsorption-desorption isotherms, specific surface area, pore volume and pore size distribution spectra of mechanically activated powder mixtures were established by N2 adsorption at 77 K. Microstructure analysis was performed using scanning electron microscopy (SEM) and digital pattern recognition (DPR) microstructure quantity analysis. The phase composition of the mixed powders was determined by X-ray analysis. Mechanochemical activation of the ZnO-SnO2 system resulted in fine grinding of the starting particles and generation of contacts between them, mass transfer at contacts zones and formation of Zn2SnO4 spinel, which was observed after 40 min of activation.
PB  - Elsevier Sci Ltd, Oxford
T2  - Ceramics International
T1  - Morphology investigation of mechanically activated ZnO-SnO2 system
VL  - 34
IS  - 3
SP  - 639
EP  - 643
DO  - 10.1016/j.ceramint.2007.01.003
ER  - 

@article{
author = "Ivetić, T. and Vuković, Zorica and Nikolić, Maria Vesna and Pavlović, Vladimir B. and Nikolić, J.R. and Minić, D. and Ristić, M.M.",
year = "2008",
abstract = "Powder mixtures of zinc oxide and tin oxide in the molar ratio, ZnO:SnO2 = 2:1, were mechanically activated in a planetary ball mill in the time intervals of 0-160 min. The adsorption-desorption isotherms, specific surface area, pore volume and pore size distribution spectra of mechanically activated powder mixtures were established by N2 adsorption at 77 K. Microstructure analysis was performed using scanning electron microscopy (SEM) and digital pattern recognition (DPR) microstructure quantity analysis. The phase composition of the mixed powders was determined by X-ray analysis. Mechanochemical activation of the ZnO-SnO2 system resulted in fine grinding of the starting particles and generation of contacts between them, mass transfer at contacts zones and formation of Zn2SnO4 spinel, which was observed after 40 min of activation.",
publisher = "Elsevier Sci Ltd, Oxford",
journal = "Ceramics International",
title = "Morphology investigation of mechanically activated ZnO-SnO2 system",
volume = "34",
number = "3",
pages = "639-643",
doi = "10.1016/j.ceramint.2007.01.003"
}

Ivetić, T., Vuković, Z., Nikolić, M. V., Pavlović, V. B., Nikolić, J.R., Minić, D.,& Ristić, M.M.. (2008). Morphology investigation of mechanically activated ZnO-SnO2 system. in Ceramics International
Elsevier Sci Ltd, Oxford., 34(3), 639-643.
https://doi.org/10.1016/j.ceramint.2007.01.003

Ivetić T, Vuković Z, Nikolić MV, Pavlović VB, Nikolić J, Minić D, Ristić M. Morphology investigation of mechanically activated ZnO-SnO2 system. in Ceramics International. 2008;34(3):639-643.
doi:10.1016/j.ceramint.2007.01.003 .

Ivetić, T., Vuković, Zorica, Nikolić, Maria Vesna, Pavlović, Vladimir B., Nikolić, J.R., Minić, D., Ristić, M.M., "Morphology investigation of mechanically activated ZnO-SnO2 system" in Ceramics International, 34, no. 3 (2008):639-643,
https://doi.org/10.1016/j.ceramint.2007.01.003 . .

TY  - JOUR
AU  - Nikolić, Maria Vesna
AU  - Ivetić, Tamara
AU  - Young, D.L.
AU  - Paraskevopoulos, Konstantinos M.
AU  - Zorba, Triantafyllia T.
AU  - Blagojević, Vladimir
AU  - Nikolić, Pantelija M.
AU  - Vasiljević-Radović, Dana
AU  - Ristić, Momčilo M.
PY  - 2007
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/7482
AB  - Room temperature far infrared reflectivity spectra of single phase spinel zinc-stannate thin films, prepared by rf magnetron sputtering on a glass substrate, and bulk sintered samples were measured. The sintered samples were obtained by mechanical activation of starting ZnO and SnO2 powders for 10 min followed by sintering at 1300 °C for 2 h. The reflectivity diagrams obtained for bulk samples were numerically analyzed using the four-parameter model of coupled oscillators. The optical parameters were determined for six observed ionic oscillators belonging to the spinel structure and two additional oscillators originating from the sintering procedure resulting from pores and grain boundaries. The reflectivity diagrams obtained for thin film samples were analyzed using the four-parameter model for optical phonons with a standard optical multi-layer technique.
PB  - Elsevier
T2  - Materials Science and Engineering B-Solid State Materials for Advanced Technology
T1  - Far infrared properties of bulk sintered and thin film Zn2SnO4
VL  - 138
IS  - 1
SP  - 7
EP  - 11
DO  - 10.1016/j.mseb.2006.12.005
ER  - 

@article{
author = "Nikolić, Maria Vesna and Ivetić, Tamara and Young, D.L. and Paraskevopoulos, Konstantinos M. and Zorba, Triantafyllia T. and Blagojević, Vladimir and Nikolić, Pantelija M. and Vasiljević-Radović, Dana and Ristić, Momčilo M.",
year = "2007",
abstract = "Room temperature far infrared reflectivity spectra of single phase spinel zinc-stannate thin films, prepared by rf magnetron sputtering on a glass substrate, and bulk sintered samples were measured. The sintered samples were obtained by mechanical activation of starting ZnO and SnO2 powders for 10 min followed by sintering at 1300 °C for 2 h. The reflectivity diagrams obtained for bulk samples were numerically analyzed using the four-parameter model of coupled oscillators. The optical parameters were determined for six observed ionic oscillators belonging to the spinel structure and two additional oscillators originating from the sintering procedure resulting from pores and grain boundaries. The reflectivity diagrams obtained for thin film samples were analyzed using the four-parameter model for optical phonons with a standard optical multi-layer technique.",
publisher = "Elsevier",
journal = "Materials Science and Engineering B-Solid State Materials for Advanced Technology",
title = "Far infrared properties of bulk sintered and thin film Zn2SnO4",
volume = "138",
number = "1",
pages = "7-11",
doi = "10.1016/j.mseb.2006.12.005"
}

Nikolić, M. V., Ivetić, T., Young, D.L., Paraskevopoulos, K. M., Zorba, T. T., Blagojević, V., Nikolić, P. M., Vasiljević-Radović, D.,& Ristić, M. M.. (2007). Far infrared properties of bulk sintered and thin film Zn2SnO4. in Materials Science and Engineering B-Solid State Materials for Advanced Technology
Elsevier., 138(1), 7-11.
https://doi.org/10.1016/j.mseb.2006.12.005

Nikolić MV, Ivetić T, Young D, Paraskevopoulos KM, Zorba TT, Blagojević V, Nikolić PM, Vasiljević-Radović D, Ristić MM. Far infrared properties of bulk sintered and thin film Zn2SnO4. in Materials Science and Engineering B-Solid State Materials for Advanced Technology. 2007;138(1):7-11.
doi:10.1016/j.mseb.2006.12.005 .

Nikolić, Maria Vesna, Ivetić, Tamara, Young, D.L., Paraskevopoulos, Konstantinos M., Zorba, Triantafyllia T., Blagojević, Vladimir, Nikolić, Pantelija M., Vasiljević-Radović, Dana, Ristić, Momčilo M., "Far infrared properties of bulk sintered and thin film Zn2SnO4" in Materials Science and Engineering B-Solid State Materials for Advanced Technology, 138, no. 1 (2007):7-11,
https://doi.org/10.1016/j.mseb.2006.12.005 . .

TY  - JOUR
AU  - Nikolić, Maria Vesna
AU  - Blagojević, Vladimir D.
AU  - Paraskevopoulos, Konstantinos M.
AU  - Zorba, T.
AU  - Vasiljević-Radović, Dana
AU  - Nikolić, Pantelija M.
AU  - Ristić, Momčilo M.
PY  - 2007
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/4269
AB  - Far infrared reflection spectra of NiO polycrystals sintered at 1100 °C for various times (30–240 min) were measured at room temperature using a FTIR Spectrometer—Brucker 113V. The measured spectra depended on the sintering time due to differences in the microstructural morphology of the material and were compared with the NiO single crystal reflectivity diagram. Numerical analyses of the experimental spectra were performed using Kramers-Kronig analysis, a four-parameter model of coupled oscillators and the effective medium modeling theory. In the three-component effective medium model based on Bruggeman's theory we assumed the presence of pores, intergranular material and crystalline grains. The intergranular material and crystalline grains were defined as single and coupled ionic oscillators.
PB  - Elsevier
T2  - Journal of the European Ceramic Society
T1  - Far infrared properties of sintered NiO
VL  - 27
IS  - 2-3
SP  - 469
EP  - 474
DO  - 10.1016/j.jeurceramsoc.2006.04.065
ER  - 

@article{
author = "Nikolić, Maria Vesna and Blagojević, Vladimir D. and Paraskevopoulos, Konstantinos M. and Zorba, T. and Vasiljević-Radović, Dana and Nikolić, Pantelija M. and Ristić, Momčilo M.",
year = "2007",
abstract = "Far infrared reflection spectra of NiO polycrystals sintered at 1100 °C for various times (30–240 min) were measured at room temperature using a FTIR Spectrometer—Brucker 113V. The measured spectra depended on the sintering time due to differences in the microstructural morphology of the material and were compared with the NiO single crystal reflectivity diagram. Numerical analyses of the experimental spectra were performed using Kramers-Kronig analysis, a four-parameter model of coupled oscillators and the effective medium modeling theory. In the three-component effective medium model based on Bruggeman's theory we assumed the presence of pores, intergranular material and crystalline grains. The intergranular material and crystalline grains were defined as single and coupled ionic oscillators.",
publisher = "Elsevier",
journal = "Journal of the European Ceramic Society",
title = "Far infrared properties of sintered NiO",
volume = "27",
number = "2-3",
pages = "469-474",
doi = "10.1016/j.jeurceramsoc.2006.04.065"
}

Nikolić, M. V., Blagojević, V. D., Paraskevopoulos, K. M., Zorba, T., Vasiljević-Radović, D., Nikolić, P. M.,& Ristić, M. M.. (2007). Far infrared properties of sintered NiO. in Journal of the European Ceramic Society
Elsevier., 27(2-3), 469-474.
https://doi.org/10.1016/j.jeurceramsoc.2006.04.065

Nikolić MV, Blagojević VD, Paraskevopoulos KM, Zorba T, Vasiljević-Radović D, Nikolić PM, Ristić MM. Far infrared properties of sintered NiO. in Journal of the European Ceramic Society. 2007;27(2-3):469-474.
doi:10.1016/j.jeurceramsoc.2006.04.065 .

Nikolić, Maria Vesna, Blagojević, Vladimir D., Paraskevopoulos, Konstantinos M., Zorba, T., Vasiljević-Radović, Dana, Nikolić, Pantelija M., Ristić, Momčilo M., "Far infrared properties of sintered NiO" in Journal of the European Ceramic Society, 27, no. 2-3 (2007):469-474,
https://doi.org/10.1016/j.jeurceramsoc.2006.04.065 . .

TY  - JOUR
AU  - Nikolić, Pantelija M.
AU  - Koenig, W
AU  - Vujatović, Stevan S.
AU  - Blagojević, Vladimir
AU  - Luković, Danijela
AU  - Savić, Slavica M.
AU  - Radulović, Katarina
AU  - Urošević, Dragan
AU  - Nikolić, Maria Vesna
PY  - 2007
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/5687
AB  - Single crystal samples of lead telluride doped with cerium were made using the Bridgman method. Far infrared reflectivity spectra in the temperature range from 10 to 300 K are presented. The experimental data were numerically analyzed using a fitting procedure based on the plasmon–phonon interaction model and optical parameters were determined. Two additional local modes were observed at about 138 and 337 cm−1. The origin of these local vibrational impurity modes was discussed.
PB  - Elsevier
T2  - Journal of Alloys and Compounds
T1  - Far infrared properties of PbTe doped with cerium
VL  - 433
IS  - 1-2
SP  - 292
EP  - 295
DO  - 10.1016/j.jallcom.2006.06.066
ER  - 

@article{
author = "Nikolić, Pantelija M. and Koenig, W and Vujatović, Stevan S. and Blagojević, Vladimir and Luković, Danijela and Savić, Slavica M. and Radulović, Katarina and Urošević, Dragan and Nikolić, Maria Vesna",
year = "2007",
abstract = "Single crystal samples of lead telluride doped with cerium were made using the Bridgman method. Far infrared reflectivity spectra in the temperature range from 10 to 300 K are presented. The experimental data were numerically analyzed using a fitting procedure based on the plasmon–phonon interaction model and optical parameters were determined. Two additional local modes were observed at about 138 and 337 cm−1. The origin of these local vibrational impurity modes was discussed.",
publisher = "Elsevier",
journal = "Journal of Alloys and Compounds",
title = "Far infrared properties of PbTe doped with cerium",
volume = "433",
number = "1-2",
pages = "292-295",
doi = "10.1016/j.jallcom.2006.06.066"
}

Nikolić, P. M., Koenig, W., Vujatović, S. S., Blagojević, V., Luković, D., Savić, S. M., Radulović, K., Urošević, D.,& Nikolić, M. V.. (2007). Far infrared properties of PbTe doped with cerium. in Journal of Alloys and Compounds
Elsevier., 433(1-2), 292-295.
https://doi.org/10.1016/j.jallcom.2006.06.066

Nikolić PM, Koenig W, Vujatović SS, Blagojević V, Luković D, Savić SM, Radulović K, Urošević D, Nikolić MV. Far infrared properties of PbTe doped with cerium. in Journal of Alloys and Compounds. 2007;433(1-2):292-295.
doi:10.1016/j.jallcom.2006.06.066 .

Nikolić, Pantelija M., Koenig, W, Vujatović, Stevan S., Blagojević, Vladimir, Luković, Danijela, Savić, Slavica M., Radulović, Katarina, Urošević, Dragan, Nikolić, Maria Vesna, "Far infrared properties of PbTe doped with cerium" in Journal of Alloys and Compounds, 433, no. 1-2 (2007):292-295,
https://doi.org/10.1016/j.jallcom.2006.06.066 . .

TY  - JOUR
AU  - Nikolić, Maria Vesna
AU  - Nikolić, Pantelija M.
AU  - Blagojević, Vladimir
AU  - Paraskevopoulos, Konstantinos M.
AU  - Zorba, Triantafyllia T.
AU  - Vasiljević-Radović, Dana
AU  - Ristić, Momčilo M.
PY  - 2006
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/7485
AB  - Far-infrared reflection spectra of sintered α-MnSe were measured at room temperature. The measured spectrum had one pronounced peak in accordance with literature data and group theory estimation and one smaller peak resulting from the applied sintering procedure. The measured reflection spectrum was analyzed using Kramers–Kronig analysis and a three-component effective medium model based on Bruggeman's theory assuming the presence of a small amount of pores, dominant crystalline grains and intergranular material. In the model the crystalline grains were modeled as a single oscillator appropriate to the single crystal and the intergranular material was also defined as a single ionic oscillator.
PB  - De Gruyter
T2  - International Journal of Materials Research
T1  - Infrared properties of sintered α-MnSe
VL  - 97
IS  - 5
SP  - 666
EP  - 669
DO  - 10.3139/146.101288
ER  - 

@article{
author = "Nikolić, Maria Vesna and Nikolić, Pantelija M. and Blagojević, Vladimir and Paraskevopoulos, Konstantinos M. and Zorba, Triantafyllia T. and Vasiljević-Radović, Dana and Ristić, Momčilo M.",
year = "2006",
abstract = "Far-infrared reflection spectra of sintered α-MnSe were measured at room temperature. The measured spectrum had one pronounced peak in accordance with literature data and group theory estimation and one smaller peak resulting from the applied sintering procedure. The measured reflection spectrum was analyzed using Kramers–Kronig analysis and a three-component effective medium model based on Bruggeman's theory assuming the presence of a small amount of pores, dominant crystalline grains and intergranular material. In the model the crystalline grains were modeled as a single oscillator appropriate to the single crystal and the intergranular material was also defined as a single ionic oscillator.",
publisher = "De Gruyter",
journal = "International Journal of Materials Research",
title = "Infrared properties of sintered α-MnSe",
volume = "97",
number = "5",
pages = "666-669",
doi = "10.3139/146.101288"
}

Nikolić, M. V., Nikolić, P. M., Blagojević, V., Paraskevopoulos, K. M., Zorba, T. T., Vasiljević-Radović, D.,& Ristić, M. M.. (2006). Infrared properties of sintered α-MnSe. in International Journal of Materials Research
De Gruyter., 97(5), 666-669.
https://doi.org/10.3139/146.101288

Nikolić MV, Nikolić PM, Blagojević V, Paraskevopoulos KM, Zorba TT, Vasiljević-Radović D, Ristić MM. Infrared properties of sintered α-MnSe. in International Journal of Materials Research. 2006;97(5):666-669.
doi:10.3139/146.101288 .

Nikolić, Maria Vesna, Nikolić, Pantelija M., Blagojević, Vladimir, Paraskevopoulos, Konstantinos M., Zorba, Triantafyllia T., Vasiljević-Radović, Dana, Ristić, Momčilo M., "Infrared properties of sintered α-MnSe" in International Journal of Materials Research, 97, no. 5 (2006):666-669,
https://doi.org/10.3139/146.101288 . .