TY  - JOUR
AU  - Belošević, Srđan V.
AU  - Mladenović, Rastko
AU  - Dakić, Dragoljub
AU  - Paprika, Milijana
AU  - Erić, Aleksandar
AU  - Đurović, Dejan
AU  - Komatina, Mirko
AU  - Grbić, Boško
AU  - Radić, Nenad
PY  - 2007
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/309
AB  - A prototype of a solid fuel thermo-accumulating furnace has been developed. In order to achieve a higher combustion efficiency, a Pt/Al2O3 catalyst in the form of 3 ± 0.3 mm spheres was applied, which enabled further combustion of flue gases within the furnace. Experimental investigation of the influence of the catalyst on the conversion of CO has been done for different operation regimes and positions of the catalyst. Paper presents selected results regarding CO emission during wood and coal combustion. Investigations suggest a considerable effect of the catalyst and a strong influence of the catalyst position to CO emission reduction. The microstructure of the catalyst beads, characterized by selective chemisorption of CO, has shown the decrease of the number of Pt sites as a consequence of blockage by coke deposits formed during the combustion of solid fuel. .
AB  - U prototipu termo-akumulacione peći na čvrsto gorivo, primenjen je Pt/Al2O3 katalizator, u obliku sfera veličine 3 ± 0.3 mm, sa ciljem da poveća efikasnost sagorevanja i naknadno sagori gasove unutar peći. Uticaj katalizatora na konverziju CO je eksperimentalno ispitan pri različitim operacionim režimima peći i pozicijama katalizatora. Prikazani su rezultati promene emisije CO u toku sagorevanja drveta i uglja. Istraživanja su pokazala značajan efekat katalizatora na smanjenje emisije CO, kao i značaj položaja katalizatora. Mikrostruktura katalizatora, ispitana selektivnom hemisorpcijom CO, je pokazala da u toku sagorevanja čvrstih goriva u peći dolazi do deponovanja ugljenika na katalizatoru što dovodi do blokiranja i smanjenja broja Pt aktivnih centara. .
PB  - Serbian Chemical Society
T2  - Journal of the Serbian Chemical Society
T1  - Properties and efficiency of a Pt/Al2O3 catalyst applied in a solid fuel thermo-accumulating furnace
T1  - Osobine i efikasnost Pt/Al2O3 katalizatora u termo-akomulacionoj peći na čvrsto gorivo
VL  - 72
IS  - 8-9
SP  - 869
EP  - 878
DO  - 10.2298/JSC0709869B
ER  - 

@article{
author = "Belošević, Srđan V. and Mladenović, Rastko and Dakić, Dragoljub and Paprika, Milijana and Erić, Aleksandar and Đurović, Dejan and Komatina, Mirko and Grbić, Boško and Radić, Nenad",
year = "2007",
abstract = "A prototype of a solid fuel thermo-accumulating furnace has been developed. In order to achieve a higher combustion efficiency, a Pt/Al2O3 catalyst in the form of 3 ± 0.3 mm spheres was applied, which enabled further combustion of flue gases within the furnace. Experimental investigation of the influence of the catalyst on the conversion of CO has been done for different operation regimes and positions of the catalyst. Paper presents selected results regarding CO emission during wood and coal combustion. Investigations suggest a considerable effect of the catalyst and a strong influence of the catalyst position to CO emission reduction. The microstructure of the catalyst beads, characterized by selective chemisorption of CO, has shown the decrease of the number of Pt sites as a consequence of blockage by coke deposits formed during the combustion of solid fuel. ., U prototipu termo-akumulacione peći na čvrsto gorivo, primenjen je Pt/Al2O3 katalizator, u obliku sfera veličine 3 ± 0.3 mm, sa ciljem da poveća efikasnost sagorevanja i naknadno sagori gasove unutar peći. Uticaj katalizatora na konverziju CO je eksperimentalno ispitan pri različitim operacionim režimima peći i pozicijama katalizatora. Prikazani su rezultati promene emisije CO u toku sagorevanja drveta i uglja. Istraživanja su pokazala značajan efekat katalizatora na smanjenje emisije CO, kao i značaj položaja katalizatora. Mikrostruktura katalizatora, ispitana selektivnom hemisorpcijom CO, je pokazala da u toku sagorevanja čvrstih goriva u peći dolazi do deponovanja ugljenika na katalizatoru što dovodi do blokiranja i smanjenja broja Pt aktivnih centara. .",
publisher = "Serbian Chemical Society",
journal = "Journal of the Serbian Chemical Society",
title = "Properties and efficiency of a Pt/Al2O3 catalyst applied in a solid fuel thermo-accumulating furnace, Osobine i efikasnost Pt/Al2O3 katalizatora u termo-akomulacionoj peći na čvrsto gorivo",
volume = "72",
number = "8-9",
pages = "869-878",
doi = "10.2298/JSC0709869B"
}

Belošević, S. V., Mladenović, R., Dakić, D., Paprika, M., Erić, A., Đurović, D., Komatina, M., Grbić, B.,& Radić, N.. (2007). Properties and efficiency of a Pt/Al2O3 catalyst applied in a solid fuel thermo-accumulating furnace. in Journal of the Serbian Chemical Society
Serbian Chemical Society., 72(8-9), 869-878.
https://doi.org/10.2298/JSC0709869B

Belošević SV, Mladenović R, Dakić D, Paprika M, Erić A, Đurović D, Komatina M, Grbić B, Radić N. Properties and efficiency of a Pt/Al2O3 catalyst applied in a solid fuel thermo-accumulating furnace. in Journal of the Serbian Chemical Society. 2007;72(8-9):869-878.
doi:10.2298/JSC0709869B .

Belošević, Srđan V., Mladenović, Rastko, Dakić, Dragoljub, Paprika, Milijana, Erić, Aleksandar, Đurović, Dejan, Komatina, Mirko, Grbić, Boško, Radić, Nenad, "Properties and efficiency of a Pt/Al2O3 catalyst applied in a solid fuel thermo-accumulating furnace" in Journal of the Serbian Chemical Society, 72, no. 8-9 (2007):869-878,
https://doi.org/10.2298/JSC0709869B . .

TY  - JOUR
AU  - Dakić, Dragoljub
AU  - Belošević, Srđan
AU  - Mladenović, Rastko
AU  - Paprika, Milijana
AU  - Đurović, Dejan
AU  - Erić, Aleksandar
AU  - Komatina, Mirko
AU  - Grbić, Boško
AU  - Radić, Nenad
PY  - 2006
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/248
AB  - Many households in Serbia, using electric thermo-accumulation furnaces for heating, have been forced to find an alternative solution, due to a significant increase in electricity prices during the last decade. A possible solution is replacing electric heating appliances with the solid fuel-fired ones. A prototype of a new concept of thermo-accumulation solid fuel-fired furnace has been developed to meet these growing needs, providing electricity saving together with considerable environmental benefits. Two strategies for reduction of carbon monoxide emission are examined in the paper: application of Pt/Al2O3 catalyst, in the form of 3 ± 0.3 mm spheres, providing further combustion of flue gases within the furnace, as well as an additional emission reduction by means of the air excess control. Experimental investigations of the catalyst influence on the conversion of carbon monoxide have been done for different operation regimes and positions of the catalyst. The paper presents selected results regarding carbon monoxide emission during wood and coal combustion. Investigations suggest a considerable effect of the catalyst and a strong influence of the catalyst position within the furnace to carbon monoxide emission reduction. In addition, experimental tests have been conducted to asses the effect of the air excess control in the furnace on carbon monoxide emission. The amount of combustion air, the flue gas flow rate, and the fuel feeding regime have been adjusted in order to keep the flue gas oxygen content in a relatively narrow range, thus obtaining controlled combustion conditions and lower carbon monoxide emission. In this way, the furnace has been made able to respond to the changes in heating needs, fuel quality and other parameters, which is advantageous in comparison with similar solid-fuel fired furnaces.
PB  - VINCA Institute of Nuclear Sciences
T2  - Thermal Science
T1  - Reduction of carbon monoxide emission from a solid-fuel thermo-accumulation furnace
VL  - 10
IS  - 4
SP  - 107
EP  - 119
DO  - 10.2298/TSCI0604107D
ER  - 

@article{
author = "Dakić, Dragoljub and Belošević, Srđan and Mladenović, Rastko and Paprika, Milijana and Đurović, Dejan and Erić, Aleksandar and Komatina, Mirko and Grbić, Boško and Radić, Nenad",
year = "2006",
abstract = "Many households in Serbia, using electric thermo-accumulation furnaces for heating, have been forced to find an alternative solution, due to a significant increase in electricity prices during the last decade. A possible solution is replacing electric heating appliances with the solid fuel-fired ones. A prototype of a new concept of thermo-accumulation solid fuel-fired furnace has been developed to meet these growing needs, providing electricity saving together with considerable environmental benefits. Two strategies for reduction of carbon monoxide emission are examined in the paper: application of Pt/Al2O3 catalyst, in the form of 3 ± 0.3 mm spheres, providing further combustion of flue gases within the furnace, as well as an additional emission reduction by means of the air excess control. Experimental investigations of the catalyst influence on the conversion of carbon monoxide have been done for different operation regimes and positions of the catalyst. The paper presents selected results regarding carbon monoxide emission during wood and coal combustion. Investigations suggest a considerable effect of the catalyst and a strong influence of the catalyst position within the furnace to carbon monoxide emission reduction. In addition, experimental tests have been conducted to asses the effect of the air excess control in the furnace on carbon monoxide emission. The amount of combustion air, the flue gas flow rate, and the fuel feeding regime have been adjusted in order to keep the flue gas oxygen content in a relatively narrow range, thus obtaining controlled combustion conditions and lower carbon monoxide emission. In this way, the furnace has been made able to respond to the changes in heating needs, fuel quality and other parameters, which is advantageous in comparison with similar solid-fuel fired furnaces.",
publisher = "VINCA Institute of Nuclear Sciences",
journal = "Thermal Science",
title = "Reduction of carbon monoxide emission from a solid-fuel thermo-accumulation furnace",
volume = "10",
number = "4",
pages = "107-119",
doi = "10.2298/TSCI0604107D"
}

Dakić, D., Belošević, S., Mladenović, R., Paprika, M., Đurović, D., Erić, A., Komatina, M., Grbić, B.,& Radić, N.. (2006). Reduction of carbon monoxide emission from a solid-fuel thermo-accumulation furnace. in Thermal Science
VINCA Institute of Nuclear Sciences., 10(4), 107-119.
https://doi.org/10.2298/TSCI0604107D

Dakić D, Belošević S, Mladenović R, Paprika M, Đurović D, Erić A, Komatina M, Grbić B, Radić N. Reduction of carbon monoxide emission from a solid-fuel thermo-accumulation furnace. in Thermal Science. 2006;10(4):107-119.
doi:10.2298/TSCI0604107D .

Dakić, Dragoljub, Belošević, Srđan, Mladenović, Rastko, Paprika, Milijana, Đurović, Dejan, Erić, Aleksandar, Komatina, Mirko, Grbić, Boško, Radić, Nenad, "Reduction of carbon monoxide emission from a solid-fuel thermo-accumulation furnace" in Thermal Science, 10, no. 4 (2006):107-119,
https://doi.org/10.2298/TSCI0604107D . .

TY  - JOUR
AU  - Nikolić, Nebojša D.
AU  - Rakočević, Zlatko Lj.
AU  - Đurović, Dejan
AU  - Popov, Konstantin I.
PY  - 2006
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/4112
AB  - The zinc coatings electrode posited from solution containing dextrin/salicyl aldehyde mixture are
examined by the scanning tunneling microscopy (STM). It is shown that mirror brightness of these zinc deposits is associated with flat and mutually parallel hexagonal zinc crystals which are smooth at the atomic level. The mechanism of zinc electrodeposition with these additives is examined by the use of a possibility of STM software measurements based on root-mean-square roughness analysis of metal surfaces and known as scaling analysis. It is proposed that the zinc growth in the presence of these additives follows the Edwards–Wilkinson model.
PB  - MAIK "Nauka /Interperiodica" (Russia)
T2  - Russian Journal of Electrochemistry
T1  - Nanostructural Analysis of Mirror – Bright Zinc Coatings
VL  - 42
SP  - 1121
EP  - 1126
DO  - 10.1134/S102319350610020X
ER  - 

@article{
author = "Nikolić, Nebojša D. and Rakočević, Zlatko Lj. and Đurović, Dejan and Popov, Konstantin I.",
year = "2006",
abstract = "The zinc coatings electrode posited from solution containing dextrin/salicyl aldehyde mixture are
examined by the scanning tunneling microscopy (STM). It is shown that mirror brightness of these zinc deposits is associated with flat and mutually parallel hexagonal zinc crystals which are smooth at the atomic level. The mechanism of zinc electrodeposition with these additives is examined by the use of a possibility of STM software measurements based on root-mean-square roughness analysis of metal surfaces and known as scaling analysis. It is proposed that the zinc growth in the presence of these additives follows the Edwards–Wilkinson model.",
publisher = "MAIK "Nauka /Interperiodica" (Russia)",
journal = "Russian Journal of Electrochemistry",
title = "Nanostructural Analysis of Mirror – Bright Zinc Coatings",
volume = "42",
pages = "1121-1126",
doi = "10.1134/S102319350610020X"
}

Nikolić, N. D., Rakočević, Z. Lj., Đurović, D.,& Popov, K. I.. (2006). Nanostructural Analysis of Mirror – Bright Zinc Coatings. in Russian Journal of Electrochemistry
MAIK "Nauka /Interperiodica" (Russia)., 42, 1121-1126.
https://doi.org/10.1134/S102319350610020X

Nikolić ND, Rakočević ZL, Đurović D, Popov KI. Nanostructural Analysis of Mirror – Bright Zinc Coatings. in Russian Journal of Electrochemistry. 2006;42:1121-1126.
doi:10.1134/S102319350610020X .

Nikolić, Nebojša D., Rakočević, Zlatko Lj., Đurović, Dejan, Popov, Konstantin I., "Nanostructural Analysis of Mirror – Bright Zinc Coatings" in Russian Journal of Electrochemistry, 42 (2006):1121-1126,
https://doi.org/10.1134/S102319350610020X . .

TY  - JOUR
AU  - Obradović, Maja
AU  - Đurović, Dejan
AU  - Kowal, Andrzej
AU  - Petrović, Bisenija M.
AU  - Stojanović, V.
AU  - Maksimović, Miodrag D.
AU  - Stevanović, Rade M.
AU  - Despić, Aleksandar R.
PY  - 2005
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/199
AB  - The Ni-W alloys were electrochemically deposited from a ammonia-citrate electrolyte on rotation disc electrode with a replaceable steel disc, by direct and pulsed current. The aim of the paper is investigations of parameters of deposition, structure of alloys and temperature treatment on morphology and micro hardness of alloys.
AB  - Prevlake legure Ni-W su elektrohemijski taložene iz amonijačno-citratnog elektrolita, na rotirajuću disk elektrodu od čelika, konstantnom i pulsirajućom strujom. Cilj rada je ispitivanje uticaja parametara taloženja sastava legure i termičkog tretmana na morfologiju i mikrotvrdoću dobijenih prevlaka.
PB  - Belgrade, Serbia : Engineering Society for Corrosion
T2  - Zaštita materijala
T1  - Properties of Ni-W alloys electrochemically deposited by direct and pulse current
T1  - Karakteristike legura Ni-W elektrohemijski taloženih konstantnom i pulsirajućom strujom
VL  - 46
IS  - 3
SP  - 5
EP  - 12
UR  - https://hdl.handle.net/21.15107/rcub_cer_199
ER  - 

@article{
author = "Obradović, Maja and Đurović, Dejan and Kowal, Andrzej and Petrović, Bisenija M. and Stojanović, V. and Maksimović, Miodrag D. and Stevanović, Rade M. and Despić, Aleksandar R.",
year = "2005",
abstract = "The Ni-W alloys were electrochemically deposited from a ammonia-citrate electrolyte on rotation disc electrode with a replaceable steel disc, by direct and pulsed current. The aim of the paper is investigations of parameters of deposition, structure of alloys and temperature treatment on morphology and micro hardness of alloys., Prevlake legure Ni-W su elektrohemijski taložene iz amonijačno-citratnog elektrolita, na rotirajuću disk elektrodu od čelika, konstantnom i pulsirajućom strujom. Cilj rada je ispitivanje uticaja parametara taloženja sastava legure i termičkog tretmana na morfologiju i mikrotvrdoću dobijenih prevlaka.",
publisher = "Belgrade, Serbia : Engineering Society for Corrosion",
journal = "Zaštita materijala",
title = "Properties of Ni-W alloys electrochemically deposited by direct and pulse current, Karakteristike legura Ni-W elektrohemijski taloženih konstantnom i pulsirajućom strujom",
volume = "46",
number = "3",
pages = "5-12",
url = "https://hdl.handle.net/21.15107/rcub_cer_199"
}

Obradović, M., Đurović, D., Kowal, A., Petrović, B. M., Stojanović, V., Maksimović, M. D., Stevanović, R. M.,& Despić, A. R.. (2005). Properties of Ni-W alloys electrochemically deposited by direct and pulse current. in Zaštita materijala
Belgrade, Serbia : Engineering Society for Corrosion., 46(3), 5-12.
https://hdl.handle.net/21.15107/rcub_cer_199

Obradović M, Đurović D, Kowal A, Petrović BM, Stojanović V, Maksimović MD, Stevanović RM, Despić AR. Properties of Ni-W alloys electrochemically deposited by direct and pulse current. in Zaštita materijala. 2005;46(3):5-12.
https://hdl.handle.net/21.15107/rcub_cer_199 .

Obradović, Maja, Đurović, Dejan, Kowal, Andrzej, Petrović, Bisenija M., Stojanović, V., Maksimović, Miodrag D., Stevanović, Rade M., Despić, Aleksandar R., "Properties of Ni-W alloys electrochemically deposited by direct and pulse current" in Zaštita materijala, 46, no. 3 (2005):5-12,
https://hdl.handle.net/21.15107/rcub_cer_199 .

TY  - JOUR
AU  - Nikolić, Nebojša D.
AU  - Novaković, Goran
AU  - Rakočević, Zlatko Lj.
AU  - Đurović, Dejan
AU  - Popov, Konstantin I.
PY  - 2002
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/4106
AB  - Reflection and structural analyses of different copper and zinc coatings were performed. The coatings of copper obtained were from acid sulfate solutions in the absence and presence of thiourea. The coatings of zinc were obtained from acid sulfate solutions in the absence and presence of dextrin and furfural. They were examined by STM, X-ray diffraction (XRD) analysis, and measurements of the reflection of light from their surfaces were taken. Reflection of light from zinc and copper coatings obtained from corresponding pure sulfate solutions was mostly diffuse reflection. The copper coating obtained in the presence of thiourea and the zinc coating obtained in the presence of dextrin and furfural showed a high degree of mirror reflection, and based on structural analysis are characterised as mirror bright metal surfaces.
PB  - Elsevier
T2  - Surface and Coatings Technology
T1  - Comparative reflection and structural analyses of copper and zinc coatings electrodeposited from acid sulfate solutions without and with additives
VL  - 161
IS  - 2-3
SP  - 188
EP  - 194
DO  - 10.1016/S0257-8972(02)00517-0
ER  - 

@article{
author = "Nikolić, Nebojša D. and Novaković, Goran and Rakočević, Zlatko Lj. and Đurović, Dejan and Popov, Konstantin I.",
year = "2002",
abstract = "Reflection and structural analyses of different copper and zinc coatings were performed. The coatings of copper obtained were from acid sulfate solutions in the absence and presence of thiourea. The coatings of zinc were obtained from acid sulfate solutions in the absence and presence of dextrin and furfural. They were examined by STM, X-ray diffraction (XRD) analysis, and measurements of the reflection of light from their surfaces were taken. Reflection of light from zinc and copper coatings obtained from corresponding pure sulfate solutions was mostly diffuse reflection. The copper coating obtained in the presence of thiourea and the zinc coating obtained in the presence of dextrin and furfural showed a high degree of mirror reflection, and based on structural analysis are characterised as mirror bright metal surfaces.",
publisher = "Elsevier",
journal = "Surface and Coatings Technology",
title = "Comparative reflection and structural analyses of copper and zinc coatings electrodeposited from acid sulfate solutions without and with additives",
volume = "161",
number = "2-3",
pages = "188-194",
doi = "10.1016/S0257-8972(02)00517-0"
}

Nikolić, N. D., Novaković, G., Rakočević, Z. Lj., Đurović, D.,& Popov, K. I.. (2002). Comparative reflection and structural analyses of copper and zinc coatings electrodeposited from acid sulfate solutions without and with additives. in Surface and Coatings Technology
Elsevier., 161(2-3), 188-194.
https://doi.org/10.1016/S0257-8972(02)00517-0

Nikolić ND, Novaković G, Rakočević ZL, Đurović D, Popov KI. Comparative reflection and structural analyses of copper and zinc coatings electrodeposited from acid sulfate solutions without and with additives. in Surface and Coatings Technology. 2002;161(2-3):188-194.
doi:10.1016/S0257-8972(02)00517-0 .

Nikolić, Nebojša D., Novaković, Goran, Rakočević, Zlatko Lj., Đurović, Dejan, Popov, Konstantin I., "Comparative reflection and structural analyses of copper and zinc coatings electrodeposited from acid sulfate solutions without and with additives" in Surface and Coatings Technology, 161, no. 2-3 (2002):188-194,
https://doi.org/10.1016/S0257-8972(02)00517-0 . .

TY  - JOUR
AU  - Nikolić, Nebojša D.
AU  - Rakočević, Zlatko Lj.
AU  - Đurović, Dejan
AU  - Popov, Konstantin I.
PY  - 2002
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/52
AB  - The reflection and structural characteristics of the nickel coatings obtained in the presence of a basic brightening addition agent only, and of both a basic and top brightening addition agent are examined. It is shown that the nickel coating obtained in the presence of both a basic and top brightening addition agent fulfilled the conditions to be characterized as a mirror bright metal surface. The nickel coating obtained in the presence of a basic brightening addition agent only is characterized as a semi-bright metal surface.
AB  - Ispitane su refleksione i strukturne karakteristike prevlaka nikla dobijenih sa osnovnim, i sa osnovnim i vrhunskim dodacima za sjaj. Pokazano je da je prevlaka nikla dobijena sa osnovnim i vrhunskim dodacima za sjaj ispunila uslove da bude okarakterisana kao ogledalski sjajna površina. Prevlaka nikla dobijena samo sa osnovnim dodatkom za sjaj je okarakterisana kao polusjajna metalna površina.
PB  - Serbian Chemical Society
T2  - Journal of the Serbian Chemical Society
T1  - Reflection and structural characteristics of semi-bright and mirror bright nickel coatings
T1  - Refleksione i strukturne karakteristike polusjajnih i ogledalski sjajnih prevlaka nikla
VL  - 67
IS  - 6
SP  - 437
EP  - 443
DO  - 10.2298/JSC0206437N
ER  - 

@article{
author = "Nikolić, Nebojša D. and Rakočević, Zlatko Lj. and Đurović, Dejan and Popov, Konstantin I.",
year = "2002",
abstract = "The reflection and structural characteristics of the nickel coatings obtained in the presence of a basic brightening addition agent only, and of both a basic and top brightening addition agent are examined. It is shown that the nickel coating obtained in the presence of both a basic and top brightening addition agent fulfilled the conditions to be characterized as a mirror bright metal surface. The nickel coating obtained in the presence of a basic brightening addition agent only is characterized as a semi-bright metal surface., Ispitane su refleksione i strukturne karakteristike prevlaka nikla dobijenih sa osnovnim, i sa osnovnim i vrhunskim dodacima za sjaj. Pokazano je da je prevlaka nikla dobijena sa osnovnim i vrhunskim dodacima za sjaj ispunila uslove da bude okarakterisana kao ogledalski sjajna površina. Prevlaka nikla dobijena samo sa osnovnim dodatkom za sjaj je okarakterisana kao polusjajna metalna površina.",
publisher = "Serbian Chemical Society",
journal = "Journal of the Serbian Chemical Society",
title = "Reflection and structural characteristics of semi-bright and mirror bright nickel coatings, Refleksione i strukturne karakteristike polusjajnih i ogledalski sjajnih prevlaka nikla",
volume = "67",
number = "6",
pages = "437-443",
doi = "10.2298/JSC0206437N"
}

Nikolić, N. D., Rakočević, Z. Lj., Đurović, D.,& Popov, K. I.. (2002). Reflection and structural characteristics of semi-bright and mirror bright nickel coatings. in Journal of the Serbian Chemical Society
Serbian Chemical Society., 67(6), 437-443.
https://doi.org/10.2298/JSC0206437N

Nikolić ND, Rakočević ZL, Đurović D, Popov KI. Reflection and structural characteristics of semi-bright and mirror bright nickel coatings. in Journal of the Serbian Chemical Society. 2002;67(6):437-443.
doi:10.2298/JSC0206437N .

Nikolić, Nebojša D., Rakočević, Zlatko Lj., Đurović, Dejan, Popov, Konstantin I., "Reflection and structural characteristics of semi-bright and mirror bright nickel coatings" in Journal of the Serbian Chemical Society, 67, no. 6 (2002):437-443,
https://doi.org/10.2298/JSC0206437N . .

TY  - JOUR
AU  - Nikolić, Nebojša D.
AU  - Stojilković, Evica R.
AU  - Đurović, Dejan
AU  - Pavlović, Miomir
AU  - Knežević, Vida R.
PY  - 2000
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/4111
AB  - The preferred orientations of copper deposits obtained from acid sulfate solutions were examined. Mat deposits obtained in the absence of the additives and in the presence of disodium 2-naphtol-3,6-disulfonic acid possessed a weak (200) and (220) preferred orientation, respectively. Bright deposit obtained with thiourea only had (111) orientation, while the deposit obtained with mixture thiourea/disodium 2-naphtol-3,6-disulfonic acid exhibited predominant (111) orientation. Bright copper deposits had the preferred orientation in the closest-packed plane of f.c.c. copper lattice, i.e. in the (111) plane.
PB  - Switzerland :  Trans Tech Publications Ltd
T2  - Materials Science Forum
T1  - The Preferred Orientation of Bright Copper Deposits
VL  - 352
SP  - 73
EP  - 78
DO  - 10.4028/www.scientific.net/MSF.352.73
ER  - 

@article{
author = "Nikolić, Nebojša D. and Stojilković, Evica R. and Đurović, Dejan and Pavlović, Miomir and Knežević, Vida R.",
year = "2000",
abstract = "The preferred orientations of copper deposits obtained from acid sulfate solutions were examined. Mat deposits obtained in the absence of the additives and in the presence of disodium 2-naphtol-3,6-disulfonic acid possessed a weak (200) and (220) preferred orientation, respectively. Bright deposit obtained with thiourea only had (111) orientation, while the deposit obtained with mixture thiourea/disodium 2-naphtol-3,6-disulfonic acid exhibited predominant (111) orientation. Bright copper deposits had the preferred orientation in the closest-packed plane of f.c.c. copper lattice, i.e. in the (111) plane.",
publisher = "Switzerland :  Trans Tech Publications Ltd",
journal = "Materials Science Forum",
title = "The Preferred Orientation of Bright Copper Deposits",
volume = "352",
pages = "73-78",
doi = "10.4028/www.scientific.net/MSF.352.73"
}

Nikolić, N. D., Stojilković, E. R., Đurović, D., Pavlović, M.,& Knežević, V. R.. (2000). The Preferred Orientation of Bright Copper Deposits. in Materials Science Forum
Switzerland :  Trans Tech Publications Ltd., 352, 73-78.
https://doi.org/10.4028/www.scientific.net/MSF.352.73

Nikolić ND, Stojilković ER, Đurović D, Pavlović M, Knežević VR. The Preferred Orientation of Bright Copper Deposits. in Materials Science Forum. 2000;352:73-78.
doi:10.4028/www.scientific.net/MSF.352.73 .

Nikolić, Nebojša D., Stojilković, Evica R., Đurović, Dejan, Pavlović, Miomir, Knežević, Vida R., "The Preferred Orientation of Bright Copper Deposits" in Materials Science Forum, 352 (2000):73-78,
https://doi.org/10.4028/www.scientific.net/MSF.352.73 . .

TY  - JOUR
AU  - Nikolić, Nebojša D.
AU  - Popov, Konstantin I.
AU  - Rakočević, Zlatko Lj.
AU  - Đurović, Dejan
AU  - Pavlović, Miomir
AU  - Stojanović, Miodrag
PY  - 2000
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/3
AB  - The structures of bright zinc coatings obtained from acid sulfate solutions in the presenceof dextrin/salicylaldehyde mixture were examined. It was shown by the STM technique that the surfaces of bright zinc coatings are covered by hexagonal zinc crys­tals, the tops of planes of which are flat and mutually parallel and which exhibit smooth­ness on the atomic level. X-Ray diffraction (XRD) analysis of the bright zinc coatings showed that the zinc crystallites are oriented in the (110) plane only.
AB  - Ispitana je struktura sjajnih prevlaka cinka istaloženih iz kiselog sulfatnog elektrolita sa dodatkom dekstrina i salicil aldehida. Pokazano je da je površina sjajnih prevlaka pokrivena heksagonalnim kristalima cinka, čiji vrhovi su ravni i međusobno paralelni, i koji su glatki na atomskom nivou. Rendgensko-difrakciona analiza sjajnih prevlaka cinka je pokazala da su kristaliti cinka orijentisani samo u (110) ravni.
PB  - Serbian Chemical Society
T2  - Journal of the Serbian Chemical Society
T1  - The structure of bright zinc coatings
T1  - Struktura sjajnih prevlaka cinka
VL  - 65
IS  - 11
SP  - 819
EP  - 827
DO  - 10.2298/jsc0011819n
ER  - 

@article{
author = "Nikolić, Nebojša D. and Popov, Konstantin I. and Rakočević, Zlatko Lj. and Đurović, Dejan and Pavlović, Miomir and Stojanović, Miodrag",
year = "2000",
abstract = "The structures of bright zinc coatings obtained from acid sulfate solutions in the presenceof dextrin/salicylaldehyde mixture were examined. It was shown by the STM technique that the surfaces of bright zinc coatings are covered by hexagonal zinc crys­tals, the tops of planes of which are flat and mutually parallel and which exhibit smooth­ness on the atomic level. X-Ray diffraction (XRD) analysis of the bright zinc coatings showed that the zinc crystallites are oriented in the (110) plane only., Ispitana je struktura sjajnih prevlaka cinka istaloženih iz kiselog sulfatnog elektrolita sa dodatkom dekstrina i salicil aldehida. Pokazano je da je površina sjajnih prevlaka pokrivena heksagonalnim kristalima cinka, čiji vrhovi su ravni i međusobno paralelni, i koji su glatki na atomskom nivou. Rendgensko-difrakciona analiza sjajnih prevlaka cinka je pokazala da su kristaliti cinka orijentisani samo u (110) ravni.",
publisher = "Serbian Chemical Society",
journal = "Journal of the Serbian Chemical Society",
title = "The structure of bright zinc coatings, Struktura sjajnih prevlaka cinka",
volume = "65",
number = "11",
pages = "819-827",
doi = "10.2298/jsc0011819n"
}

Nikolić, N. D., Popov, K. I., Rakočević, Z. Lj., Đurović, D., Pavlović, M.,& Stojanović, M.. (2000). The structure of bright zinc coatings. in Journal of the Serbian Chemical Society
Serbian Chemical Society., 65(11), 819-827.
https://doi.org/10.2298/jsc0011819n

Nikolić ND, Popov KI, Rakočević ZL, Đurović D, Pavlović M, Stojanović M. The structure of bright zinc coatings. in Journal of the Serbian Chemical Society. 2000;65(11):819-827.
doi:10.2298/jsc0011819n .

Nikolić, Nebojša D., Popov, Konstantin I., Rakočević, Zlatko Lj., Đurović, Dejan, Pavlović, Miomir, Stojanović, Miodrag, "The structure of bright zinc coatings" in Journal of the Serbian Chemical Society, 65, no. 11 (2000):819-827,
https://doi.org/10.2298/jsc0011819n . .