Kreculj, Dragan

Link to this page

Authority KeyName Variants
bd520771-d3f2-4e02-9917-756906f7f6de
  • Kreculj, Dragan (4)

Author's Bibliography

Application of Additive Technology and Reverse Engineering in the Realization of Damaged Obsolete Parts

Vorkapić, Miloš; Živojinović, Danijela; Kreculj, Dragan; Ivanov, Toni; Baltić, Marija; Simonović, Aleksandar

(Beograd : Mašinski fakultet, 2023)

TY  - JOUR
AU  - Vorkapić, Miloš
AU  - Živojinović, Danijela
AU  - Kreculj, Dragan
AU  - Ivanov, Toni
AU  - Baltić, Marija
AU  - Simonović, Aleksandar
PY  - 2023
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/5887
AB  - Reverse engineering (RE) aims to design a new replacement part based on
the existing part. The goal is to perform a quality reproduction of the
physical part with the best possible mechanical characteristics aiming to
find optimal solutions regarding the shape and dimensions of the part. The
procedure is implemented through a series of steps: creating a digital 3D
model, improving model parameters, and realizing products using additive
technologies. In this paper, a review and implementation of the funda–
mental methodologies of RE were carried out on the example of a damaged
protective cover with an unknown geometry and material essential for the
function of a discontinued device with no technical documentation and
spare parts. An optical scanning method, 3D CAD, FEA, and additive
manufacturing were used to realize the reproduced part. It was shown that
by utilizing RE the lifecycle of the device could be significantly extended
with minimal cost.
AB  - Реверзбилни инжењеринг (РЕ) има за циљ да
пројектује нови заменски део на основу постојећег
дела. Поступак се спроводи кроз низ корака: израда
дигиталног 3Д модела, побољшање и оптимизација
параметара модела и реализација производа
применом адитивних технологија. Циљ је да се
изврши квалитетна репродукција физичког дела са
најбољим могућим механичким карактеристикама у
циљу проналажења оптималних решења у погледу
облика и димензија дела. У овом раду је извршен
преглед и имплементација основних методологија
РЕ на примеру оштећеног заштитног поклопца
непознате геометрије и материјала од суштинског
значаја за функционисање уређаја који се не
производи, а при томе нема расположиве техничке
документације и резервних делова. У реализацији
репродукованог дела коришћена је метода оптичког
скенирања, 3D CAD, FEA и адитивна производња.
Показало се да се коришћењем РE може значајно
продужити животни циклус уређаја уз минималне
трошкове.
PB  - Beograd : Mašinski fakultet
T2  - FME Transactions
T1  - Application of Additive Technology and Reverse Engineering in the Realization of Damaged Obsolete Parts
T1  - Примена адитивне технологије и реверзибилног инжењерства у реализацији оштећених застарелих делова
VL  - 51
IS  - 1
SP  - 31
EP  - 38
DO  - 10.5937/fme2301031V
ER  - 
@article{
author = "Vorkapić, Miloš and Živojinović, Danijela and Kreculj, Dragan and Ivanov, Toni and Baltić, Marija and Simonović, Aleksandar",
year = "2023",
abstract = "Reverse engineering (RE) aims to design a new replacement part based on
the existing part. The goal is to perform a quality reproduction of the
physical part with the best possible mechanical characteristics aiming to
find optimal solutions regarding the shape and dimensions of the part. The
procedure is implemented through a series of steps: creating a digital 3D
model, improving model parameters, and realizing products using additive
technologies. In this paper, a review and implementation of the funda–
mental methodologies of RE were carried out on the example of a damaged
protective cover with an unknown geometry and material essential for the
function of a discontinued device with no technical documentation and
spare parts. An optical scanning method, 3D CAD, FEA, and additive
manufacturing were used to realize the reproduced part. It was shown that
by utilizing RE the lifecycle of the device could be significantly extended
with minimal cost., Реверзбилни инжењеринг (РЕ) има за циљ да
пројектује нови заменски део на основу постојећег
дела. Поступак се спроводи кроз низ корака: израда
дигиталног 3Д модела, побољшање и оптимизација
параметара модела и реализација производа
применом адитивних технологија. Циљ је да се
изврши квалитетна репродукција физичког дела са
најбољим могућим механичким карактеристикама у
циљу проналажења оптималних решења у погледу
облика и димензија дела. У овом раду је извршен
преглед и имплементација основних методологија
РЕ на примеру оштећеног заштитног поклопца
непознате геометрије и материјала од суштинског
значаја за функционисање уређаја који се не
производи, а при томе нема расположиве техничке
документације и резервних делова. У реализацији
репродукованог дела коришћена је метода оптичког
скенирања, 3D CAD, FEA и адитивна производња.
Показало се да се коришћењем РE може значајно
продужити животни циклус уређаја уз минималне
трошкове.",
publisher = "Beograd : Mašinski fakultet",
journal = "FME Transactions",
title = "Application of Additive Technology and Reverse Engineering in the Realization of Damaged Obsolete Parts, Примена адитивне технологије и реверзибилног инжењерства у реализацији оштећених застарелих делова",
volume = "51",
number = "1",
pages = "31-38",
doi = "10.5937/fme2301031V"
}
Vorkapić, M., Živojinović, D., Kreculj, D., Ivanov, T., Baltić, M.,& Simonović, A.. (2023). Application of Additive Technology and Reverse Engineering in the Realization of Damaged Obsolete Parts. in FME Transactions
Beograd : Mašinski fakultet., 51(1), 31-38.
https://doi.org/10.5937/fme2301031V
Vorkapić M, Živojinović D, Kreculj D, Ivanov T, Baltić M, Simonović A. Application of Additive Technology and Reverse Engineering in the Realization of Damaged Obsolete Parts. in FME Transactions. 2023;51(1):31-38.
doi:10.5937/fme2301031V .
Vorkapić, Miloš, Živojinović, Danijela, Kreculj, Dragan, Ivanov, Toni, Baltić, Marija, Simonović, Aleksandar, "Application of Additive Technology and Reverse Engineering in the Realization of Damaged Obsolete Parts" in FME Transactions, 51, no. 1 (2023):31-38,
https://doi.org/10.5937/fme2301031V . .
2
2

Upotreba 3D štampe u analizi dizajna realizovanog proizvoda: Slučaj - kutija malogabaritnog transmitera pritiska

Vorkapić, Miloš; Ivanov, Toni; Baltić, Marija; Kreculj, Dragan; Tanović, Dragoljub Lj.; Kovačević, Aleksandar M.

(Savez inženjera i tehničara Srbije, Beograd, Srbija, 2020)

TY  - JOUR
AU  - Vorkapić, Miloš
AU  - Ivanov, Toni
AU  - Baltić, Marija
AU  - Kreculj, Dragan
AU  - Tanović, Dragoljub Lj.
AU  - Kovačević, Aleksandar M.
PY  - 2020
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/3925
AB  - Aditivna proizvodnja uključuje izradu proizvoda složene geometrije u relativno malim količinama, kao i izradu alata i kalupa za masovnu proizvodnju. Aditivnom proizovnjom realizuju se modeli prema digitalnom prikazu, a primena je ogromna u različitim industrijskim sektorima. U poređenju sa tradicionalnom proizvodnjom, glavni parametri u odabiru aditivne tehnologije su: ušteda energije, smanjenje otpada, smanjenje upotrebe većeg broja alata, kao i optimizacija dizajna. Aditivna proizvodnja ili tehnologija 3D štampe rade na principu dodavanja materijala u slojevima, tj. model se formira od slojeva rastopljenog materijala koji se odmah hladi i očvršćava. 3D štampa omogućava čestu i jednostavnu modifikaciju modela na zahtev kupca, a pre ulaska modela u samu proizvodnju. Ovo čini komunikaciju na relaciji proizvođač-kupac dosta jednostavnom. Polazni materijal za izradu modela je polilaktična kiselina (PLA). To je ekološki termoplastični poliester koji se prirodno razgrađuje u prirodi. Na mehaničke karakteristike realizovanog modela od PLA značajno utiču različite tehnološke promenljive kao što su: prečnik brizgaljke, debljina definisanog sloja, procentualna vrednost ispune, veličina uzorka koji se puni, brzina punjenja i temperatura proizvodnje. Cilj ovog rada je da se prikaže postupak realizacije kutije elektronike za malogabaritni transmiter pritiska na 3D štampaču. Time se projektantu daje mogućnost da ispravi postojeće greške, modifikuje proizvod prema zahterima krajnjih korisnika i na kraju daje polazna osnova za realizaciju prototipa novog proizvoda.
AB  - Additive manufacturing involves manufacturing of products with complex geometry in relatively small quantities, as well as the tools and molds manufacturing for mass production. With additive manufacturing, digital models are being realized and implementation is huge in various industrial sectors. Compared to traditional manufacturing, the main parameters in the choice of additive technology are: energy savings, waste reduction, reduced use of more tools and optimization of design. Additive manufacturing or 3D printing technology works on the principle of adding material in layers, i.e. the model is formed from layers of molten material that is immediately cooled and solidified. 3D printing allows to work with customers to solve design problems before embarking on a launch production. The starting material for the model is polyactic acid (PLA). It is an eco-friendly thermoplastic polyester, that breaks down naturally. The mechanical characteristics of the realized PLA model are significantly influenced by various technological variables, such as following: nozzle diameter, thickness of defined layer, percentage of fill,
sample size to be filled, filling rate and production temperature. The aim of this paper is to present the process of realization of an electronics enclosure for a compact pressure transmitter on a 3D printer. This gives the designer the possibility to correct existing errors, modify the product according to the wishes of the end users and finally provides a starting point for the prototype of new product.
PB  - Savez inženjera i tehničara Srbije, Beograd, Srbija
T2  - Tehnika
T1  - Upotreba 3D štampe u analizi dizajna realizovanog proizvoda: Slučaj - kutija malogabaritnog transmitera pritiska
T1  - The usage of 3D printing in the analysis of the product design: Case – Electronic enclosure of compact pressure transmitter
VL  - 75
IS  - 2
SP  - 179
EP  - 186
DO  - 10.5937/tehnika2002179V
ER  - 
@article{
author = "Vorkapić, Miloš and Ivanov, Toni and Baltić, Marija and Kreculj, Dragan and Tanović, Dragoljub Lj. and Kovačević, Aleksandar M.",
year = "2020",
abstract = "Aditivna proizvodnja uključuje izradu proizvoda složene geometrije u relativno malim količinama, kao i izradu alata i kalupa za masovnu proizvodnju. Aditivnom proizovnjom realizuju se modeli prema digitalnom prikazu, a primena je ogromna u različitim industrijskim sektorima. U poređenju sa tradicionalnom proizvodnjom, glavni parametri u odabiru aditivne tehnologije su: ušteda energije, smanjenje otpada, smanjenje upotrebe većeg broja alata, kao i optimizacija dizajna. Aditivna proizvodnja ili tehnologija 3D štampe rade na principu dodavanja materijala u slojevima, tj. model se formira od slojeva rastopljenog materijala koji se odmah hladi i očvršćava. 3D štampa omogućava čestu i jednostavnu modifikaciju modela na zahtev kupca, a pre ulaska modela u samu proizvodnju. Ovo čini komunikaciju na relaciji proizvođač-kupac dosta jednostavnom. Polazni materijal za izradu modela je polilaktična kiselina (PLA). To je ekološki termoplastični poliester koji se prirodno razgrađuje u prirodi. Na mehaničke karakteristike realizovanog modela od PLA značajno utiču različite tehnološke promenljive kao što su: prečnik brizgaljke, debljina definisanog sloja, procentualna vrednost ispune, veličina uzorka koji se puni, brzina punjenja i temperatura proizvodnje. Cilj ovog rada je da se prikaže postupak realizacije kutije elektronike za malogabaritni transmiter pritiska na 3D štampaču. Time se projektantu daje mogućnost da ispravi postojeće greške, modifikuje proizvod prema zahterima krajnjih korisnika i na kraju daje polazna osnova za realizaciju prototipa novog proizvoda., Additive manufacturing involves manufacturing of products with complex geometry in relatively small quantities, as well as the tools and molds manufacturing for mass production. With additive manufacturing, digital models are being realized and implementation is huge in various industrial sectors. Compared to traditional manufacturing, the main parameters in the choice of additive technology are: energy savings, waste reduction, reduced use of more tools and optimization of design. Additive manufacturing or 3D printing technology works on the principle of adding material in layers, i.e. the model is formed from layers of molten material that is immediately cooled and solidified. 3D printing allows to work with customers to solve design problems before embarking on a launch production. The starting material for the model is polyactic acid (PLA). It is an eco-friendly thermoplastic polyester, that breaks down naturally. The mechanical characteristics of the realized PLA model are significantly influenced by various technological variables, such as following: nozzle diameter, thickness of defined layer, percentage of fill,
sample size to be filled, filling rate and production temperature. The aim of this paper is to present the process of realization of an electronics enclosure for a compact pressure transmitter on a 3D printer. This gives the designer the possibility to correct existing errors, modify the product according to the wishes of the end users and finally provides a starting point for the prototype of new product.",
publisher = "Savez inženjera i tehničara Srbije, Beograd, Srbija",
journal = "Tehnika",
title = "Upotreba 3D štampe u analizi dizajna realizovanog proizvoda: Slučaj - kutija malogabaritnog transmitera pritiska, The usage of 3D printing in the analysis of the product design: Case – Electronic enclosure of compact pressure transmitter",
volume = "75",
number = "2",
pages = "179-186",
doi = "10.5937/tehnika2002179V"
}
Vorkapić, M., Ivanov, T., Baltić, M., Kreculj, D., Tanović, D. Lj.,& Kovačević, A. M.. (2020). Upotreba 3D štampe u analizi dizajna realizovanog proizvoda: Slučaj - kutija malogabaritnog transmitera pritiska. in Tehnika
Savez inženjera i tehničara Srbije, Beograd, Srbija., 75(2), 179-186.
https://doi.org/10.5937/tehnika2002179V
Vorkapić M, Ivanov T, Baltić M, Kreculj D, Tanović DL, Kovačević AM. Upotreba 3D štampe u analizi dizajna realizovanog proizvoda: Slučaj - kutija malogabaritnog transmitera pritiska. in Tehnika. 2020;75(2):179-186.
doi:10.5937/tehnika2002179V .
Vorkapić, Miloš, Ivanov, Toni, Baltić, Marija, Kreculj, Dragan, Tanović, Dragoljub Lj., Kovačević, Aleksandar M., "Upotreba 3D štampe u analizi dizajna realizovanog proizvoda: Slučaj - kutija malogabaritnog transmitera pritiska" in Tehnika, 75, no. 2 (2020):179-186,
https://doi.org/10.5937/tehnika2002179V . .

Potencijal poljoprivredne biomase u sistemima proizvodnje biogasa u Republici Srbiji

Ećim-Đurić, Olivera; Kreculj, Dragan; Živojinović, Danijela; Vorkapić, Miloš

(Savez mašinskih i elektrotehničkih inženjera i tehničara Srbije - SMEITS, Beograd, 2020)

TY  - CONF
AU  - Ećim-Đurić, Olivera
AU  - Kreculj, Dragan
AU  - Živojinović, Danijela
AU  - Vorkapić, Miloš
PY  - 2020
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/3920
AB  - Biomasa predstavlja prema zvaničnim podacima najznačajniji potencijal obnovljivih izvora energije u Republici Srbiji. Ona čini oko 63% od ukupnog potencijala, ali za sada njena iskorišćenost nije na zadovoljavajućem nivou. Od ukupnih količina 14,2·104 TJ procenjuje se da je oko 9,6·104 TJ
neiskorišćeno. To je i dalje evidentno veliki raspoloživi potencijal, posebno u poljoprivrednoj biomasi, izuzimajući udeo biogoriva u sektoru saobraćaja, čiji potencijal na godišnjem nivou iznosi oko 7,1·104 TJ. Glavne prepreke za intenzivniju preradu biomase i dalje predstavljaju visoki troškovi manipulacije, dispergovanost zemljišnih poseda, a naročito vremenska neusklađenost u proizvodnji, preradi i korišćenju biomase, što svakako povećava troškove skladištenja. U dosadašnjim analizama, najširu upotrebu u domaćinstvima, biomasa ima u direktnom sagorevanju i proizvodnji toplotne energije, ili u proizvodnji peleta i briketa, gde je još uvek manje zastupljena u odnosu na šumsku biomasu. Iako u poslednjih nekoliko godina trend rasta energana na biogas raste, i ukupna instalisana snaga iznosi oko 20 MW, ovaj sektor u narednim godinama ima najveći potencijal za razvoj, posebno u lokalnim zajednicama koje su primarno okrenute poljoprivrednoj proizvodnji. Rad se bavi analizom stanja proizvodnje, prerade, transporta i mogućnosti primene biomase, u cilju kogenerativne proizvodnje električne i toplotne energije. Razmatra se i uticaj korišćenja biomase na zaštitu i održivost životne sredine, kroz analizu studije slučaja na primerima teritorijalnih jedinica u Vojvodini.
AB  - According to official data, biomass represents the most significant potential of renewable energy sources in the Republic of Serbia. It accounts for about 63% of the total potential, but for now its use is not at a satisfactory level. In total amounts of 14,2·104 TJ, it is estimated that about 9,6·104 TJ is unused. This is still evidently a large available potential, especially in agricultural biomass, with the exception of the binding share of biofuels in the transport sector, whose annual potential is around 7,1·104 TJ. The main obstacles for more intensive biomass processing continue to be the high costs of manipulation, the dispersion of land holdings and especially the time mismatch in the production, processing, and use of biomass, which certainly increases storage costs. In the former analyzes, the most widespread use in households, biomass has in direct combustion and production of thermal energy, or in the production of pellets and briquettes, where it is still less represented in relation to forest biomass. Although in the last few years the growth trend of biogas power plants is growing, and the total installed capacity is about 20 MW, this sector has the greatest potential for development in the coming years, especially in local communities, that are primarily focused on agricultural production. The paper deals with the condition analysis of the production, processing, transport, and the possibility of applying agricultural biomass, for the purpose of cogeneration electricity and heat production. The impact of the use of biomass on the protection and sustainability of the environment is also considered, through the analysis of a case study on the examples of territorial units in Vojvodina.
PB  - Savez mašinskih i elektrotehničkih inženjera i tehničara Srbije - SMEITS, Beograd
C3  - 8th International Conference on Renewable Electrical Power Sources (8. Međunarodna konferencija o obnovljivim izvorima električne energije), ICREPS 2020, October 16, Belgrade, Serbia
T1  - Potencijal poljoprivredne biomase u sistemima proizvodnje biogasa u Republici Srbiji
T1  - Potential of agricultural biomass in biogas production systems in the Republic of Serbia
SP  - 63
EP  - 70
UR  - https://hdl.handle.net/21.15107/rcub_cer_3920
ER  - 
@conference{
author = "Ećim-Đurić, Olivera and Kreculj, Dragan and Živojinović, Danijela and Vorkapić, Miloš",
year = "2020",
abstract = "Biomasa predstavlja prema zvaničnim podacima najznačajniji potencijal obnovljivih izvora energije u Republici Srbiji. Ona čini oko 63% od ukupnog potencijala, ali za sada njena iskorišćenost nije na zadovoljavajućem nivou. Od ukupnih količina 14,2·104 TJ procenjuje se da je oko 9,6·104 TJ
neiskorišćeno. To je i dalje evidentno veliki raspoloživi potencijal, posebno u poljoprivrednoj biomasi, izuzimajući udeo biogoriva u sektoru saobraćaja, čiji potencijal na godišnjem nivou iznosi oko 7,1·104 TJ. Glavne prepreke za intenzivniju preradu biomase i dalje predstavljaju visoki troškovi manipulacije, dispergovanost zemljišnih poseda, a naročito vremenska neusklađenost u proizvodnji, preradi i korišćenju biomase, što svakako povećava troškove skladištenja. U dosadašnjim analizama, najširu upotrebu u domaćinstvima, biomasa ima u direktnom sagorevanju i proizvodnji toplotne energije, ili u proizvodnji peleta i briketa, gde je još uvek manje zastupljena u odnosu na šumsku biomasu. Iako u poslednjih nekoliko godina trend rasta energana na biogas raste, i ukupna instalisana snaga iznosi oko 20 MW, ovaj sektor u narednim godinama ima najveći potencijal za razvoj, posebno u lokalnim zajednicama koje su primarno okrenute poljoprivrednoj proizvodnji. Rad se bavi analizom stanja proizvodnje, prerade, transporta i mogućnosti primene biomase, u cilju kogenerativne proizvodnje električne i toplotne energije. Razmatra se i uticaj korišćenja biomase na zaštitu i održivost životne sredine, kroz analizu studije slučaja na primerima teritorijalnih jedinica u Vojvodini., According to official data, biomass represents the most significant potential of renewable energy sources in the Republic of Serbia. It accounts for about 63% of the total potential, but for now its use is not at a satisfactory level. In total amounts of 14,2·104 TJ, it is estimated that about 9,6·104 TJ is unused. This is still evidently a large available potential, especially in agricultural biomass, with the exception of the binding share of biofuels in the transport sector, whose annual potential is around 7,1·104 TJ. The main obstacles for more intensive biomass processing continue to be the high costs of manipulation, the dispersion of land holdings and especially the time mismatch in the production, processing, and use of biomass, which certainly increases storage costs. In the former analyzes, the most widespread use in households, biomass has in direct combustion and production of thermal energy, or in the production of pellets and briquettes, where it is still less represented in relation to forest biomass. Although in the last few years the growth trend of biogas power plants is growing, and the total installed capacity is about 20 MW, this sector has the greatest potential for development in the coming years, especially in local communities, that are primarily focused on agricultural production. The paper deals with the condition analysis of the production, processing, transport, and the possibility of applying agricultural biomass, for the purpose of cogeneration electricity and heat production. The impact of the use of biomass on the protection and sustainability of the environment is also considered, through the analysis of a case study on the examples of territorial units in Vojvodina.",
publisher = "Savez mašinskih i elektrotehničkih inženjera i tehničara Srbije - SMEITS, Beograd",
journal = "8th International Conference on Renewable Electrical Power Sources (8. Međunarodna konferencija o obnovljivim izvorima električne energije), ICREPS 2020, October 16, Belgrade, Serbia",
title = "Potencijal poljoprivredne biomase u sistemima proizvodnje biogasa u Republici Srbiji, Potential of agricultural biomass in biogas production systems in the Republic of Serbia",
pages = "63-70",
url = "https://hdl.handle.net/21.15107/rcub_cer_3920"
}
Ećim-Đurić, O., Kreculj, D., Živojinović, D.,& Vorkapić, M.. (2020). Potencijal poljoprivredne biomase u sistemima proizvodnje biogasa u Republici Srbiji. in 8th International Conference on Renewable Electrical Power Sources (8. Međunarodna konferencija o obnovljivim izvorima električne energije), ICREPS 2020, October 16, Belgrade, Serbia
Savez mašinskih i elektrotehničkih inženjera i tehničara Srbije - SMEITS, Beograd., 63-70.
https://hdl.handle.net/21.15107/rcub_cer_3920
Ećim-Đurić O, Kreculj D, Živojinović D, Vorkapić M. Potencijal poljoprivredne biomase u sistemima proizvodnje biogasa u Republici Srbiji. in 8th International Conference on Renewable Electrical Power Sources (8. Međunarodna konferencija o obnovljivim izvorima električne energije), ICREPS 2020, October 16, Belgrade, Serbia. 2020;:63-70.
https://hdl.handle.net/21.15107/rcub_cer_3920 .
Ećim-Đurić, Olivera, Kreculj, Dragan, Živojinović, Danijela, Vorkapić, Miloš, "Potencijal poljoprivredne biomase u sistemima proizvodnje biogasa u Republici Srbiji" in 8th International Conference on Renewable Electrical Power Sources (8. Međunarodna konferencija o obnovljivim izvorima električne energije), ICREPS 2020, October 16, Belgrade, Serbia (2020):63-70,
https://hdl.handle.net/21.15107/rcub_cer_3920 .

Using QFD and AHP Tools in the Case of Industrial Transmitters Manufacturing

Ćoćkalo, Dragan; Vorkapić, Miloš; Kreculj, Dragan; Đorđević, Dejan; Frantlović, Miloš

(Serbia : University of Belgrade, Faculty of Mechanical Engineering, 2020)

TY  - JOUR
AU  - Ćoćkalo, Dragan
AU  - Vorkapić, Miloš
AU  - Kreculj, Dragan
AU  - Đorđević, Dejan
AU  - Frantlović, Miloš
PY  - 2020
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/3862
AB  - The analysis of a new product realization from the view of customer
requirements and a relevant technical response of a company is presented
in this paper. Two types of tools are used: QFD and AHP. HOQ within
QFD is used for modeling technical requirements on the basis of defined
customer demands. AHP serves as an addition in the process of technical
requirements definition, it is used as a strategy for fast response to
customer requirements. A comparison between leading foreign and
domestic producers of transmitters has also been presented. HOQ
realization on the example of intelligent pressure transmitter has shown
that design parameters were defined. The implementation of AHP
methodology has pointed at the significance of modular architecture for
transmitter realization. Original contribution of this work is reflected in
QFD analysis solutions – customer requirements were satisfied by giving
technical characteristics with the aim of a new product realization.
AB  - У овом раду представљена је анализа реализације
новог производа са аспекта потреба купаца и
релевантног техничког одговора компаније. Користе
се две врсте алата: QFD и АHP. HOQ у оквиру QFD
се користи за моделирање техничких захтева на
основу дефинисаних потреба клијената. AHP служи
као додатак у процесу дефинисања техничких
захтева, употребљава се као стратегија за брзо
реаговање на захтеве купаца. Такође је приказано
поређење водећих страних и домаћих произвођача
трансмитера. Реализација HOQ-а на примеру
интелигентног трансмитера притиска показала је да
су параметри дизајна дефинисани. Примена AHP
методологије указала је на значај модуларне
архитектуре за реализацију трансмитера.
Оригинални допринос овог рада огледа се у QFD
анализама - захтеви купаца су удовољени давањем
техничких карактеристика са циљем реализације
новог производа.
PB  - Serbia : University of Belgrade, Faculty of Mechanical Engineering
T2  - FME Transactions
T1  - Using QFD and AHP Tools in the Case of Industrial Transmitters Manufacturing
T1  - Кorišćenje QFD И AHP alata u slučaju proizvodnje industrijskih transmitera
IS  - 48
IS  - 1
SP  - 164
EP  - 172
DO  - 10.5937/fmet2001164C
ER  - 
@article{
author = "Ćoćkalo, Dragan and Vorkapić, Miloš and Kreculj, Dragan and Đorđević, Dejan and Frantlović, Miloš",
year = "2020",
abstract = "The analysis of a new product realization from the view of customer
requirements and a relevant technical response of a company is presented
in this paper. Two types of tools are used: QFD and AHP. HOQ within
QFD is used for modeling technical requirements on the basis of defined
customer demands. AHP serves as an addition in the process of technical
requirements definition, it is used as a strategy for fast response to
customer requirements. A comparison between leading foreign and
domestic producers of transmitters has also been presented. HOQ
realization on the example of intelligent pressure transmitter has shown
that design parameters were defined. The implementation of AHP
methodology has pointed at the significance of modular architecture for
transmitter realization. Original contribution of this work is reflected in
QFD analysis solutions – customer requirements were satisfied by giving
technical characteristics with the aim of a new product realization., У овом раду представљена је анализа реализације
новог производа са аспекта потреба купаца и
релевантног техничког одговора компаније. Користе
се две врсте алата: QFD и АHP. HOQ у оквиру QFD
се користи за моделирање техничких захтева на
основу дефинисаних потреба клијената. AHP служи
као додатак у процесу дефинисања техничких
захтева, употребљава се као стратегија за брзо
реаговање на захтеве купаца. Такође је приказано
поређење водећих страних и домаћих произвођача
трансмитера. Реализација HOQ-а на примеру
интелигентног трансмитера притиска показала је да
су параметри дизајна дефинисани. Примена AHP
методологије указала је на значај модуларне
архитектуре за реализацију трансмитера.
Оригинални допринос овог рада огледа се у QFD
анализама - захтеви купаца су удовољени давањем
техничких карактеристика са циљем реализације
новог производа.",
publisher = "Serbia : University of Belgrade, Faculty of Mechanical Engineering",
journal = "FME Transactions",
title = "Using QFD and AHP Tools in the Case of Industrial Transmitters Manufacturing, Кorišćenje QFD И AHP alata u slučaju proizvodnje industrijskih transmitera",
number = "48, 1",
pages = "164-172",
doi = "10.5937/fmet2001164C"
}
Ćoćkalo, D., Vorkapić, M., Kreculj, D., Đorđević, D.,& Frantlović, M.. (2020). Using QFD and AHP Tools in the Case of Industrial Transmitters Manufacturing. in FME Transactions
Serbia : University of Belgrade, Faculty of Mechanical Engineering.(48), 164-172.
https://doi.org/10.5937/fmet2001164C
Ćoćkalo D, Vorkapić M, Kreculj D, Đorđević D, Frantlović M. Using QFD and AHP Tools in the Case of Industrial Transmitters Manufacturing. in FME Transactions. 2020;(48):164-172.
doi:10.5937/fmet2001164C .
Ćoćkalo, Dragan, Vorkapić, Miloš, Kreculj, Dragan, Đorđević, Dejan, Frantlović, Miloš, "Using QFD and AHP Tools in the Case of Industrial Transmitters Manufacturing" in FME Transactions, no. 48 (2020):164-172,
https://doi.org/10.5937/fmet2001164C . .
6
6