TY  - CONF
AU  - Ognjanović, Miloš
AU  - Dojčinović, Biljana
AU  - Stanković, Dalibor
AU  - Mirković, Marija
AU  - Vranješ-Đurić, Sanja
AU  - Antić, Bratislav
PY  - 2023
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/7042
AB  - Nanomaterials are intensively researched both from the fundamental aspect due to new properties at the nanoscale, as well as the aspect of their application in many areas of technology. Magnetic nanoparticles (MNPs) are being tested for use in the diagnosis and therapy of diseases. A new field of medicine, Magnetic nanomedicine is primarily based on the application of MNPs as drug carriers, diagnostic agents in Magnetic Resonance Imaging (MRI) and heat generators in magnetic hyperthermia. Among nanoparticles, magnetic nanoplatforms based on iron oxides for cancer diagnosis and therapy (Cancer nanomedicine) are the most researched and clinically tested. This study presents the results of research into the physicochemical properties of iron oxide nanoparticles prepared by the polyol route, as well as their testing for potential applications as agents in magnetic hyperthermia (MH) and radionuclide carriers (vectors) for the diagnosis and therapy of malignant diseases. Multicore iron oxide structures synthesized by the "polyol" method represent clusters of single-core nanoparticles or crystallites. The dimensions of the single core particles are \textasciitilde13.5 nm, while the nanoflowers formed by clustering are \textasciitilde25 nm, depending on the applied synthesis parameters. For targeted medical applications, nanoflowers are coated with different ligands in order to increase colloidal stability and biocompatibility. The best results were by coating MNPs with polyacrylic acid (PAA). The multifunctionality of nanoflowers was investigated by measuring their hyperthermic efficiency for applications in magnetic hyperthermia and radiolabeling with diagnostic (99mTc) and therapeutic radionuclides (177Lu, 90Y). In addition to traditional methods of cancer therapy (surgery, radiotherapy, and chemotherapy), new ways of therapy such as MH are constantly being developed. MH is a therapy based on the property of MNPs that when placed in an alternating (AC) magnetic field, transform the electromagnetic energy of the field into heat. When located inside a tumor, MNPs can locally generate a temperature of 42-46 °C and destroy cancer cells by heat. The hyperthermic efficiency of MNPs is expressed through the Intrinsic Loss Power (ILP) parameter. The measured ILP was 7.3 nHm2/kg which is considered one of the higher reported values found in the literature for iron oxides. Nanoflowers were radiolabeled with 99mTc, 177Lu, and 90Y radionuclides. The in vitro stability of radiolabeling was investigated. Good in vitro stability indicates that the formed radioactive particles can be used simultaneously for bi-modal cancer therapy (MH and radionuclide therapy) or for MH therapy and diagnostics (theranostics), in the case of labeling with 99mTc.
PB  - Association of Metallurgical Engineers of Serbia (AMES)
C3  - MME SEE : 5th Metallurgical and Materials Engineering Congress of South-East Europe : book of abstracts; June 7-10, Trebinje, Bosnia and Herzegovina
T1  - Multicore flower-like magnetite for potential application in cancer nanomedicine
SP  - 21
EP  - 21
UR  - https://hdl.handle.net/21.15107/rcub_cer_7042
ER  - 

@conference{
author = "Ognjanović, Miloš and Dojčinović, Biljana and Stanković, Dalibor and Mirković, Marija and Vranješ-Đurić, Sanja and Antić, Bratislav",
year = "2023",
abstract = "Nanomaterials are intensively researched both from the fundamental aspect due to new properties at the nanoscale, as well as the aspect of their application in many areas of technology. Magnetic nanoparticles (MNPs) are being tested for use in the diagnosis and therapy of diseases. A new field of medicine, Magnetic nanomedicine is primarily based on the application of MNPs as drug carriers, diagnostic agents in Magnetic Resonance Imaging (MRI) and heat generators in magnetic hyperthermia. Among nanoparticles, magnetic nanoplatforms based on iron oxides for cancer diagnosis and therapy (Cancer nanomedicine) are the most researched and clinically tested. This study presents the results of research into the physicochemical properties of iron oxide nanoparticles prepared by the polyol route, as well as their testing for potential applications as agents in magnetic hyperthermia (MH) and radionuclide carriers (vectors) for the diagnosis and therapy of malignant diseases. Multicore iron oxide structures synthesized by the "polyol" method represent clusters of single-core nanoparticles or crystallites. The dimensions of the single core particles are \textasciitilde13.5 nm, while the nanoflowers formed by clustering are \textasciitilde25 nm, depending on the applied synthesis parameters. For targeted medical applications, nanoflowers are coated with different ligands in order to increase colloidal stability and biocompatibility. The best results were by coating MNPs with polyacrylic acid (PAA). The multifunctionality of nanoflowers was investigated by measuring their hyperthermic efficiency for applications in magnetic hyperthermia and radiolabeling with diagnostic (99mTc) and therapeutic radionuclides (177Lu, 90Y). In addition to traditional methods of cancer therapy (surgery, radiotherapy, and chemotherapy), new ways of therapy such as MH are constantly being developed. MH is a therapy based on the property of MNPs that when placed in an alternating (AC) magnetic field, transform the electromagnetic energy of the field into heat. When located inside a tumor, MNPs can locally generate a temperature of 42-46 °C and destroy cancer cells by heat. The hyperthermic efficiency of MNPs is expressed through the Intrinsic Loss Power (ILP) parameter. The measured ILP was 7.3 nHm2/kg which is considered one of the higher reported values found in the literature for iron oxides. Nanoflowers were radiolabeled with 99mTc, 177Lu, and 90Y radionuclides. The in vitro stability of radiolabeling was investigated. Good in vitro stability indicates that the formed radioactive particles can be used simultaneously for bi-modal cancer therapy (MH and radionuclide therapy) or for MH therapy and diagnostics (theranostics), in the case of labeling with 99mTc.",
publisher = "Association of Metallurgical Engineers of Serbia (AMES)",
journal = "MME SEE : 5th Metallurgical and Materials Engineering Congress of South-East Europe : book of abstracts; June 7-10, Trebinje, Bosnia and Herzegovina",
title = "Multicore flower-like magnetite for potential application in cancer nanomedicine",
pages = "21-21",
url = "https://hdl.handle.net/21.15107/rcub_cer_7042"
}

Ognjanović, M., Dojčinović, B., Stanković, D., Mirković, M., Vranješ-Đurić, S.,& Antić, B.. (2023). Multicore flower-like magnetite for potential application in cancer nanomedicine. in MME SEE : 5th Metallurgical and Materials Engineering Congress of South-East Europe : book of abstracts; June 7-10, Trebinje, Bosnia and Herzegovina
Association of Metallurgical Engineers of Serbia (AMES)., 21-21.
https://hdl.handle.net/21.15107/rcub_cer_7042

Ognjanović M, Dojčinović B, Stanković D, Mirković M, Vranješ-Đurić S, Antić B. Multicore flower-like magnetite for potential application in cancer nanomedicine. in MME SEE : 5th Metallurgical and Materials Engineering Congress of South-East Europe : book of abstracts; June 7-10, Trebinje, Bosnia and Herzegovina. 2023;:21-21.
https://hdl.handle.net/21.15107/rcub_cer_7042 .

Ognjanović, Miloš, Dojčinović, Biljana, Stanković, Dalibor, Mirković, Marija, Vranješ-Đurić, Sanja, Antić, Bratislav, "Multicore flower-like magnetite for potential application in cancer nanomedicine" in MME SEE : 5th Metallurgical and Materials Engineering Congress of South-East Europe : book of abstracts; June 7-10, Trebinje, Bosnia and Herzegovina (2023):21-21,
https://hdl.handle.net/21.15107/rcub_cer_7042 .

TY  - CONF
AU  - Ognjanović, Miloš
AU  - Radović, Magdalena
AU  - Mirković, Marija
AU  - Vranješ-Đurić, Sanja
AU  - Dojčinović, Biljana
AU  - Stanković, Dalibor
AU  - Antić, Bratislav
PY  - 2023
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/7342
AB  - In the last decades, self-heating magnetic nanoparticles (MNPs) were engineered and investigated for magnetic hyperthermia (MH) and other applications such as catalysis and chemical synthesis. To be applied as nanoheaters for in vivo MH in cancer therapy, MNPs should have high heating efficiency expressed by Intrinsic Loss Power (ILP). One of the requirements for in vivo applications of MNPs is their non-toxicity. Hence, the most investigated MNPs for MH are based on iron oxides (magnetite and maghemite), which are non-toxic or slightly toxic. This work aimed to apply thepolyol-mediated protocol to engineer mixed Zn1-xMnxFe2O4 and analyze their heating abilities. To obtain a series of Zn1-xMnxFe2O4 samples with a specific nominal composition, the initial components, salts of Zn, Mn and Fe, were mixed in the appropriate stoichiometric ratio. The deviation from the target stoichiometry and the formation of samples with polyvalent ions and possibly vacancies were determined after ICP analysis. By analyzing TEM micrographs, we found that the change in the chemical composition does not affect the morphology. Multicore flower-like nanostructures with a size in the range of 47-63 nm were obtained. They consist of many cores (crystallites or nanoparticles) with a size of \textasciitilde10 nm. The samples show good colloidal stability, which is significant for their medical applications. Magnetization measurements in different DC fields showed that the samples are superparamagnetic at 300K and that the saturation magnetization values are in the range of \textasciitilde59-73 emu/g. The hyperthermic efficiency of the synthesized samples was tested in an external ac field of 252 kHz and a field strength of 15.9 kA/m. Significantly different values were obtained for the ILP parameter (in units nHm2/Kg): 5.77 (Zn0.098Mn0.447Fe2.455O4) ˃ 3.22 (Mn0.624Fe2.376O4) ˃ 2.04 (Zn0.182Mn0.344Fe2.474O4) ˃ 1.36 (Zn0.309Mn0.240Fe2.451O4) ˃ 1.01 (Zn0.394Mn0.138Fe2.468O4) ˃ 0.34 (Zn0.640Fe2.360O4). To explain the values of the ILP parameter, additional research is required, which includes the analysis of the influence of local defects and cation distribution on the magnetism of the investigated nanostructures. Also, significantly high ILP values indicate that some samples can be selected and further tested for in vitro/in vivo applications.
PB  - Society of Chemists and Technologists of Macedonia
C3  - 26th Congress of the Society of Chemists and Technologists of Macedonia : the book of abstracts; September 20-23, Ohrid, Macedonia
T1  - Engineering multi-core flower-like magnetic nanoparticles with high intrinsic loss power
SP  - 185
EP  - 185
UR  - https://hdl.handle.net/21.15107/rcub_cer_7342
ER  - 

@conference{
author = "Ognjanović, Miloš and Radović, Magdalena and Mirković, Marija and Vranješ-Đurić, Sanja and Dojčinović, Biljana and Stanković, Dalibor and Antić, Bratislav",
year = "2023",
abstract = "In the last decades, self-heating magnetic nanoparticles (MNPs) were engineered and investigated for magnetic hyperthermia (MH) and other applications such as catalysis and chemical synthesis. To be applied as nanoheaters for in vivo MH in cancer therapy, MNPs should have high heating efficiency expressed by Intrinsic Loss Power (ILP). One of the requirements for in vivo applications of MNPs is their non-toxicity. Hence, the most investigated MNPs for MH are based on iron oxides (magnetite and maghemite), which are non-toxic or slightly toxic. This work aimed to apply thepolyol-mediated protocol to engineer mixed Zn1-xMnxFe2O4 and analyze their heating abilities. To obtain a series of Zn1-xMnxFe2O4 samples with a specific nominal composition, the initial components, salts of Zn, Mn and Fe, were mixed in the appropriate stoichiometric ratio. The deviation from the target stoichiometry and the formation of samples with polyvalent ions and possibly vacancies were determined after ICP analysis. By analyzing TEM micrographs, we found that the change in the chemical composition does not affect the morphology. Multicore flower-like nanostructures with a size in the range of 47-63 nm were obtained. They consist of many cores (crystallites or nanoparticles) with a size of \textasciitilde10 nm. The samples show good colloidal stability, which is significant for their medical applications. Magnetization measurements in different DC fields showed that the samples are superparamagnetic at 300K and that the saturation magnetization values are in the range of \textasciitilde59-73 emu/g. The hyperthermic efficiency of the synthesized samples was tested in an external ac field of 252 kHz and a field strength of 15.9 kA/m. Significantly different values were obtained for the ILP parameter (in units nHm2/Kg): 5.77 (Zn0.098Mn0.447Fe2.455O4) ˃ 3.22 (Mn0.624Fe2.376O4) ˃ 2.04 (Zn0.182Mn0.344Fe2.474O4) ˃ 1.36 (Zn0.309Mn0.240Fe2.451O4) ˃ 1.01 (Zn0.394Mn0.138Fe2.468O4) ˃ 0.34 (Zn0.640Fe2.360O4). To explain the values of the ILP parameter, additional research is required, which includes the analysis of the influence of local defects and cation distribution on the magnetism of the investigated nanostructures. Also, significantly high ILP values indicate that some samples can be selected and further tested for in vitro/in vivo applications.",
publisher = "Society of Chemists and Technologists of Macedonia",
journal = "26th Congress of the Society of Chemists and Technologists of Macedonia : the book of abstracts; September 20-23, Ohrid, Macedonia",
title = "Engineering multi-core flower-like magnetic nanoparticles with high intrinsic loss power",
pages = "185-185",
url = "https://hdl.handle.net/21.15107/rcub_cer_7342"
}

Ognjanović, M., Radović, M., Mirković, M., Vranješ-Đurić, S., Dojčinović, B., Stanković, D.,& Antić, B.. (2023). Engineering multi-core flower-like magnetic nanoparticles with high intrinsic loss power. in 26th Congress of the Society of Chemists and Technologists of Macedonia : the book of abstracts; September 20-23, Ohrid, Macedonia
Society of Chemists and Technologists of Macedonia., 185-185.
https://hdl.handle.net/21.15107/rcub_cer_7342

Ognjanović M, Radović M, Mirković M, Vranješ-Đurić S, Dojčinović B, Stanković D, Antić B. Engineering multi-core flower-like magnetic nanoparticles with high intrinsic loss power. in 26th Congress of the Society of Chemists and Technologists of Macedonia : the book of abstracts; September 20-23, Ohrid, Macedonia. 2023;:185-185.
https://hdl.handle.net/21.15107/rcub_cer_7342 .

Ognjanović, Miloš, Radović, Magdalena, Mirković, Marija, Vranješ-Đurić, Sanja, Dojčinović, Biljana, Stanković, Dalibor, Antić, Bratislav, "Engineering multi-core flower-like magnetic nanoparticles with high intrinsic loss power" in 26th Congress of the Society of Chemists and Technologists of Macedonia : the book of abstracts; September 20-23, Ohrid, Macedonia (2023):185-185,
https://hdl.handle.net/21.15107/rcub_cer_7342 .

TY  - CONF
AU  - Ognjanović, Miloš
AU  - Stanojković, Tatjana
AU  - Dojčinović, Biljana
AU  - Radović, Magdalena
AU  - Mirković, Marija
AU  - Vranješ-Đurić, Sanja
AU  - Antić, Bratislav
PY  - 2023
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/7349
AB  - A series of MgxFe3-xO4 (x=0, 0.1, 0.2, 0.4, 0.6, 0.8, and 1) magnetic nanoparticles (MNP) were synthesized by a two-step procedure, a co-precipitation method followed by hydrothermal treatment in a microwave field. The MNP are single-core, with crystallite size gradually decreasing from 15.5(3) up to 2.5(3) nm with an increase ofx. TEM images show pseudospherical log-normally distributed particles with an average particle diameter of 19.8 nm and a polydispersity index of 26.1% for magnetite. The particle diameter decreases with the increase of magnesium (x) in the formula unit. The colloidal stability of MNP was achieved by their surface modification with citric acid (CA), oleic acid (OA) and polyethylene glycol (PEG). The cytotoxic activity of uncoated and coated Mg0.6Fe2.4O4 was tested against target malignant cells (HeLa, LC174, A549) and normal MRC5 cells. The investigated MNP show moderate cytotoxic activity against the tested malignant cells in vitro. In contrast, MNP didn’tshow any significant cytotoxic effect against normal cells. HeLa cells exhibited the highest susceptibility among the malignant cells. Mg0.6Fe2.4O4@OA show good cytotoxic activity against all examined malignant cells, significantly higher than other tested MNP. It can be seen that Mg0.6Fe2.4O4@PEG show a lower cytotoxic activity compared to all analyzed MNP. A direct method was used for labeling with radionuclide 90Y, which involves incubation of MNP with 90Y at a certain temperature and time. The labeling yield of the 90Y-coated MNP was determined by analyzing the radiochemical purity after labeling. 90YMg0.2Fe2.8O4@PEG were labeled in high yield (100%), while the yield for 90YMg0.2Fe2.8O4@CA was 83%. In vitro stability of 90Y-coated MNP at room temperature in physiological solution and human serum was monitored within 72 h from the moment of labeling by determining the radiochemical purity of ITLC-SG by radio chromatographic method. The stability of 90Y-Mg0.2Fe2.8O4@PEG was about 97%, while 90Y-Mg0.2Fe2.8O4@CA stability was 73%. The results of this study indicate that radiolabeled surface-modified (Mg, Fe)3O4 can be used as vectors in radionuclide therapy of malignant diseases.
PB  - Society of Chemists and Technologists of Macedonia
C3  - 26th Congress of the Society of Chemists and Technologists of Macedonia : the book of abstracts; September 20-23, Ohrid, Macedonia
T1  - Radiolabeled surface-modified single-core (Mg,Fe)3O4 colloidal nanoparticles as vectors in radionuclidetherapy of cancer
SP  - 186
EP  - 186
UR  - https://hdl.handle.net/21.15107/rcub_cer_7349
ER  - 

@conference{
author = "Ognjanović, Miloš and Stanojković, Tatjana and Dojčinović, Biljana and Radović, Magdalena and Mirković, Marija and Vranješ-Đurić, Sanja and Antić, Bratislav",
year = "2023",
abstract = "A series of MgxFe3-xO4 (x=0, 0.1, 0.2, 0.4, 0.6, 0.8, and 1) magnetic nanoparticles (MNP) were synthesized by a two-step procedure, a co-precipitation method followed by hydrothermal treatment in a microwave field. The MNP are single-core, with crystallite size gradually decreasing from 15.5(3) up to 2.5(3) nm with an increase ofx. TEM images show pseudospherical log-normally distributed particles with an average particle diameter of 19.8 nm and a polydispersity index of 26.1% for magnetite. The particle diameter decreases with the increase of magnesium (x) in the formula unit. The colloidal stability of MNP was achieved by their surface modification with citric acid (CA), oleic acid (OA) and polyethylene glycol (PEG). The cytotoxic activity of uncoated and coated Mg0.6Fe2.4O4 was tested against target malignant cells (HeLa, LC174, A549) and normal MRC5 cells. The investigated MNP show moderate cytotoxic activity against the tested malignant cells in vitro. In contrast, MNP didn’tshow any significant cytotoxic effect against normal cells. HeLa cells exhibited the highest susceptibility among the malignant cells. Mg0.6Fe2.4O4@OA show good cytotoxic activity against all examined malignant cells, significantly higher than other tested MNP. It can be seen that Mg0.6Fe2.4O4@PEG show a lower cytotoxic activity compared to all analyzed MNP. A direct method was used for labeling with radionuclide 90Y, which involves incubation of MNP with 90Y at a certain temperature and time. The labeling yield of the 90Y-coated MNP was determined by analyzing the radiochemical purity after labeling. 90YMg0.2Fe2.8O4@PEG were labeled in high yield (100%), while the yield for 90YMg0.2Fe2.8O4@CA was 83%. In vitro stability of 90Y-coated MNP at room temperature in physiological solution and human serum was monitored within 72 h from the moment of labeling by determining the radiochemical purity of ITLC-SG by radio chromatographic method. The stability of 90Y-Mg0.2Fe2.8O4@PEG was about 97%, while 90Y-Mg0.2Fe2.8O4@CA stability was 73%. The results of this study indicate that radiolabeled surface-modified (Mg, Fe)3O4 can be used as vectors in radionuclide therapy of malignant diseases.",
publisher = "Society of Chemists and Technologists of Macedonia",
journal = "26th Congress of the Society of Chemists and Technologists of Macedonia : the book of abstracts; September 20-23, Ohrid, Macedonia",
title = "Radiolabeled surface-modified single-core (Mg,Fe)3O4 colloidal nanoparticles as vectors in radionuclidetherapy of cancer",
pages = "186-186",
url = "https://hdl.handle.net/21.15107/rcub_cer_7349"
}

Ognjanović, M., Stanojković, T., Dojčinović, B., Radović, M., Mirković, M., Vranješ-Đurić, S.,& Antić, B.. (2023). Radiolabeled surface-modified single-core (Mg,Fe)3O4 colloidal nanoparticles as vectors in radionuclidetherapy of cancer. in 26th Congress of the Society of Chemists and Technologists of Macedonia : the book of abstracts; September 20-23, Ohrid, Macedonia
Society of Chemists and Technologists of Macedonia., 186-186.
https://hdl.handle.net/21.15107/rcub_cer_7349

Ognjanović M, Stanojković T, Dojčinović B, Radović M, Mirković M, Vranješ-Đurić S, Antić B. Radiolabeled surface-modified single-core (Mg,Fe)3O4 colloidal nanoparticles as vectors in radionuclidetherapy of cancer. in 26th Congress of the Society of Chemists and Technologists of Macedonia : the book of abstracts; September 20-23, Ohrid, Macedonia. 2023;:186-186.
https://hdl.handle.net/21.15107/rcub_cer_7349 .

Ognjanović, Miloš, Stanojković, Tatjana, Dojčinović, Biljana, Radović, Magdalena, Mirković, Marija, Vranješ-Đurić, Sanja, Antić, Bratislav, "Radiolabeled surface-modified single-core (Mg,Fe)3O4 colloidal nanoparticles as vectors in radionuclidetherapy of cancer" in 26th Congress of the Society of Chemists and Technologists of Macedonia : the book of abstracts; September 20-23, Ohrid, Macedonia (2023):186-186,
https://hdl.handle.net/21.15107/rcub_cer_7349 .

TY  - JOUR
AU  - Stanković, Dalibor M.
AU  - Milanović, Zorana
AU  - Švorc, Ljubomir
AU  - Stanković, Vesna
AU  - Janković, Drina
AU  - Mirković, Marija
AU  - Vranješ-Đurić, Sanja
PY  - 2021
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/4224
AB  - This work presents advanced electrochemical platform based on screen printed diamond electrode (SPDE) system for the single drop “point-of-care” testing. Proposed approach was applied for the quantification of doxorubicin hydrochloride (DOX) in biological fluids and pharmaceutical product. Using a single drop (~30 μL) of the tested solution at the electrode surface, DOX showed high electroactivity over a wide range of pHs. In these conditions, single oval shaped, well-defined and pH dependent oxidation peak was observed in the potential range from 0.5 V to 1.3 V. In the reverse scan, two cathodic peaks, were noted – around 0.3 V and – 0.5 V. Similarly, first reduction peak was pH dependent, while second one was independent in the studied range. Experimental conditions for DOX quantification were optimized and natures of the electrode reactions were investigated. Working linear range obtained for DOX detection was from 0.1 to 2.5 μM. Diffusion controlled electrode reaction reveal long life time of the proposed electrode as well high potential for practical application. Developed procedure was successfully applied for the DOX analysis in biological fluids – urine and pharmaceutical formulation. Obtained results clearly indicated that given procedure can be easily implemented for pharmaceutical control and medical analysis, in both, laboratory and field conditions
PB  - Elsevier
T2  - Diamond and Related Materials
T1  - Screen printed diamond electrode as efficient “point-of-care” platform for submicromolar determination of cytostatic drug in biological fluids and pharmaceutical product
VL  - 113
SP  - 108277
DO  - 10.1016/j.diamond.2021.108277
ER  - 

@article{
author = "Stanković, Dalibor M. and Milanović, Zorana and Švorc, Ljubomir and Stanković, Vesna and Janković, Drina and Mirković, Marija and Vranješ-Đurić, Sanja",
year = "2021",
abstract = "This work presents advanced electrochemical platform based on screen printed diamond electrode (SPDE) system for the single drop “point-of-care” testing. Proposed approach was applied for the quantification of doxorubicin hydrochloride (DOX) in biological fluids and pharmaceutical product. Using a single drop (~30 μL) of the tested solution at the electrode surface, DOX showed high electroactivity over a wide range of pHs. In these conditions, single oval shaped, well-defined and pH dependent oxidation peak was observed in the potential range from 0.5 V to 1.3 V. In the reverse scan, two cathodic peaks, were noted – around 0.3 V and – 0.5 V. Similarly, first reduction peak was pH dependent, while second one was independent in the studied range. Experimental conditions for DOX quantification were optimized and natures of the electrode reactions were investigated. Working linear range obtained for DOX detection was from 0.1 to 2.5 μM. Diffusion controlled electrode reaction reveal long life time of the proposed electrode as well high potential for practical application. Developed procedure was successfully applied for the DOX analysis in biological fluids – urine and pharmaceutical formulation. Obtained results clearly indicated that given procedure can be easily implemented for pharmaceutical control and medical analysis, in both, laboratory and field conditions",
publisher = "Elsevier",
journal = "Diamond and Related Materials",
title = "Screen printed diamond electrode as efficient “point-of-care” platform for submicromolar determination of cytostatic drug in biological fluids and pharmaceutical product",
volume = "113",
pages = "108277",
doi = "10.1016/j.diamond.2021.108277"
}

Stanković, D. M., Milanović, Z., Švorc, L., Stanković, V., Janković, D., Mirković, M.,& Vranješ-Đurić, S.. (2021). Screen printed diamond electrode as efficient “point-of-care” platform for submicromolar determination of cytostatic drug in biological fluids and pharmaceutical product. in Diamond and Related Materials
Elsevier., 113, 108277.
https://doi.org/10.1016/j.diamond.2021.108277

Stanković DM, Milanović Z, Švorc L, Stanković V, Janković D, Mirković M, Vranješ-Đurić S. Screen printed diamond electrode as efficient “point-of-care” platform for submicromolar determination of cytostatic drug in biological fluids and pharmaceutical product. in Diamond and Related Materials. 2021;113:108277.
doi:10.1016/j.diamond.2021.108277 .

Stanković, Dalibor M., Milanović, Zorana, Švorc, Ljubomir, Stanković, Vesna, Janković, Drina, Mirković, Marija, Vranješ-Đurić, Sanja, "Screen printed diamond electrode as efficient “point-of-care” platform for submicromolar determination of cytostatic drug in biological fluids and pharmaceutical product" in Diamond and Related Materials, 113 (2021):108277,
https://doi.org/10.1016/j.diamond.2021.108277 . .

TY  - JOUR
AU  - Hercigonja, Radmila
AU  - Vranješ-Đurić, Sanja
AU  - Mirković, Marija D.
AU  - Marković, Bojana
AU  - Maksin, Danijela
AU  - Marković, Bojana
AU  - Nastasović, Aleksandra
PY  - 2018
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/2290
AB  - The adsorption properties of two zeolite types, faujasite (NaY, ZnY, CoY) and LTA-4A zeolite (NaA, ZnA, CoA), towards technetium were studied in batch static experiments. The Si/Al ratio, acidity, dealumination, chargebalance cations of zeolite, contact time and temperature determined the adsorption efficiency. The maximum removal efficiency of 98.8% and K (d) value (2.06 x 10(-4) cm(3) g(-1)) was achieved using CoY (zeolite type Y). The kinetics of technetium adsorption followed the pseudo-second order model. The TcO2 adsorption is mainly due to the hydrogen bonds between protons of the zeolitic structural OH groups (Bronsted acid center) and oxygen from the TcO2 (-).
PB  - Dordrecht : Springer
T2  - Journal of Radioanalytical and Nuclear Chemistry
T1  - Technetium removal from the aqueous solution using zeolites A and Y containing transition metal ions Co2+ and Zn2+
VL  - 317
IS  - 1
SP  - 215
EP  - 225
DO  - 10.1007/s10967-018-5893-2
ER  - 

@article{
author = "Hercigonja, Radmila and Vranješ-Đurić, Sanja and Mirković, Marija D. and Marković, Bojana and Maksin, Danijela and Marković, Bojana and Nastasović, Aleksandra",
year = "2018",
abstract = "The adsorption properties of two zeolite types, faujasite (NaY, ZnY, CoY) and LTA-4A zeolite (NaA, ZnA, CoA), towards technetium were studied in batch static experiments. The Si/Al ratio, acidity, dealumination, chargebalance cations of zeolite, contact time and temperature determined the adsorption efficiency. The maximum removal efficiency of 98.8% and K (d) value (2.06 x 10(-4) cm(3) g(-1)) was achieved using CoY (zeolite type Y). The kinetics of technetium adsorption followed the pseudo-second order model. The TcO2 adsorption is mainly due to the hydrogen bonds between protons of the zeolitic structural OH groups (Bronsted acid center) and oxygen from the TcO2 (-).",
publisher = "Dordrecht : Springer",
journal = "Journal of Radioanalytical and Nuclear Chemistry",
title = "Technetium removal from the aqueous solution using zeolites A and Y containing transition metal ions Co2+ and Zn2+",
volume = "317",
number = "1",
pages = "215-225",
doi = "10.1007/s10967-018-5893-2"
}

Hercigonja, R., Vranješ-Đurić, S., Mirković, M. D., Marković, B., Maksin, D., Marković, B.,& Nastasović, A.. (2018). Technetium removal from the aqueous solution using zeolites A and Y containing transition metal ions Co2+ and Zn2+. in Journal of Radioanalytical and Nuclear Chemistry
Dordrecht : Springer., 317(1), 215-225.
https://doi.org/10.1007/s10967-018-5893-2

Hercigonja R, Vranješ-Đurić S, Mirković MD, Marković B, Maksin D, Marković B, Nastasović A. Technetium removal from the aqueous solution using zeolites A and Y containing transition metal ions Co2+ and Zn2+. in Journal of Radioanalytical and Nuclear Chemistry. 2018;317(1):215-225.
doi:10.1007/s10967-018-5893-2 .

Hercigonja, Radmila, Vranješ-Đurić, Sanja, Mirković, Marija D., Marković, Bojana, Maksin, Danijela, Marković, Bojana, Nastasović, Aleksandra, "Technetium removal from the aqueous solution using zeolites A and Y containing transition metal ions Co2+ and Zn2+" in Journal of Radioanalytical and Nuclear Chemistry, 317, no. 1 (2018):215-225,
https://doi.org/10.1007/s10967-018-5893-2 . .

TY  - JOUR
AU  - Mirković, Marija
AU  - Nikolic, Nadezda
AU  - Mijin, Dušan
AU  - Avramov Ivić, Milka
AU  - Kapor, Agnes
AU  - Tomić, Zoran D.
PY  - 2014
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/1588
AB  - The diimine dioxime ligand, 3,3'-(1,4-butanediyl-dinitrilo)bis-2-pentanone, 2,2'-dioxime (LH2), containing a N-4 donor set was prepared by the Schiff base condensation of 2-hydroxyimino-3-pentanone and 1,4-diaminobutane in two ways: in a protic and in an aprotic solvent. A higher yield of the (LH2) imine was obtained when the synthesis was performed using a protic solvent (C2H5OH) instead of aprotic benzene (78 and 30 %, respectively). The Cu(II) metal complex of diimine dioxime was synthesized in CH3OH from the perchlorate salt of LH2 in a 1:1 mole ratio. The isolated complex was characterized by the elemental analysis, IR spectroscopy and cyclic voltammetry. The structure of [Cu-2(LH)(2)](ClO4)(2) was determined by single-crystal X-ray diffraction analysis. Comparison with structurally related diimine dioxime Cu(II) complexes revealed the influence of a weak Cu center dot center dot center dot O(perchlorate) interaction on the geometry of the metallocycle.
PB  - Serbian Chemical Society
T2  - Journal of the Serbian Chemical Society
T1  - Synthesis, characterization and crystal structure of Cu(II) complex with a diimine-dioxime ligand, [Cu-2(LH)(2)](ClO4)(2). Influence of the weak Cu center dot center dot center dot O(perchlorate) interaction on the structure of the Cu2N2O2 metallocycle
VL  - 79
IS  - 5
SP  - 545
EP  - 556
DO  - 10.2298/JSC130910120M
ER  - 

@article{
author = "Mirković, Marija and Nikolic, Nadezda and Mijin, Dušan and Avramov Ivić, Milka and Kapor, Agnes and Tomić, Zoran D.",
year = "2014",
abstract = "The diimine dioxime ligand, 3,3'-(1,4-butanediyl-dinitrilo)bis-2-pentanone, 2,2'-dioxime (LH2), containing a N-4 donor set was prepared by the Schiff base condensation of 2-hydroxyimino-3-pentanone and 1,4-diaminobutane in two ways: in a protic and in an aprotic solvent. A higher yield of the (LH2) imine was obtained when the synthesis was performed using a protic solvent (C2H5OH) instead of aprotic benzene (78 and 30 %, respectively). The Cu(II) metal complex of diimine dioxime was synthesized in CH3OH from the perchlorate salt of LH2 in a 1:1 mole ratio. The isolated complex was characterized by the elemental analysis, IR spectroscopy and cyclic voltammetry. The structure of [Cu-2(LH)(2)](ClO4)(2) was determined by single-crystal X-ray diffraction analysis. Comparison with structurally related diimine dioxime Cu(II) complexes revealed the influence of a weak Cu center dot center dot center dot O(perchlorate) interaction on the geometry of the metallocycle.",
publisher = "Serbian Chemical Society",
journal = "Journal of the Serbian Chemical Society",
title = "Synthesis, characterization and crystal structure of Cu(II) complex with a diimine-dioxime ligand, [Cu-2(LH)(2)](ClO4)(2). Influence of the weak Cu center dot center dot center dot O(perchlorate) interaction on the structure of the Cu2N2O2 metallocycle",
volume = "79",
number = "5",
pages = "545-556",
doi = "10.2298/JSC130910120M"
}

Mirković, M., Nikolic, N., Mijin, D., Avramov Ivić, M., Kapor, A.,& Tomić, Z. D.. (2014). Synthesis, characterization and crystal structure of Cu(II) complex with a diimine-dioxime ligand, [Cu-2(LH)(2)](ClO4)(2). Influence of the weak Cu center dot center dot center dot O(perchlorate) interaction on the structure of the Cu2N2O2 metallocycle. in Journal of the Serbian Chemical Society
Serbian Chemical Society., 79(5), 545-556.
https://doi.org/10.2298/JSC130910120M

Mirković M, Nikolic N, Mijin D, Avramov Ivić M, Kapor A, Tomić ZD. Synthesis, characterization and crystal structure of Cu(II) complex with a diimine-dioxime ligand, [Cu-2(LH)(2)](ClO4)(2). Influence of the weak Cu center dot center dot center dot O(perchlorate) interaction on the structure of the Cu2N2O2 metallocycle. in Journal of the Serbian Chemical Society. 2014;79(5):545-556.
doi:10.2298/JSC130910120M .

Mirković, Marija, Nikolic, Nadezda, Mijin, Dušan, Avramov Ivić, Milka, Kapor, Agnes, Tomić, Zoran D., "Synthesis, characterization and crystal structure of Cu(II) complex with a diimine-dioxime ligand, [Cu-2(LH)(2)](ClO4)(2). Influence of the weak Cu center dot center dot center dot O(perchlorate) interaction on the structure of the Cu2N2O2 metallocycle" in Journal of the Serbian Chemical Society, 79, no. 5 (2014):545-556,
https://doi.org/10.2298/JSC130910120M . .

TY  - JOUR
AU  - Milutinović Nikolić, Aleksandra
AU  - Maksin, Danijela
AU  - Jović-Jovičić, Nataša
AU  - Mirkovic, M.
AU  - Stanković, Dragana
AU  - Mojović, Zorica
AU  - Banković, Predrag
PY  - 2014
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/1569
AB  - (99)Technetium is one of the largest components of nuclear waste material. In aqueous solutions Tc-99 is present as the pertechnetate oxoanion, (TcO4-)-Tc-99, which is highly soluble and mobile in groundwater under oxidizing conditions, thus posing a major environmental concern. In this study, a series of organo-modified bentonite clay samples was tested as adsorbents for the removal of radioactive (TcO4-)-Tc-99 from aqueous solution at room temperature. The influence of the hexadecyl trimethylammonium (HDTMA)/bentonite ratio on the adsorption ability of the organobentonites was investigated. It was found that the adsorbent in which the exchangeable cations were only partially substituted with HDTMA showed very low affinity toward pertechnetate. On the other hand, the adsorbents in which the HDTMA loading exceeded the cation exchange capacity (CEC) value had high efficiency. The behavior of such adsorbents was best described by a Freundlich isotherm, while for the sample in which the HDTMA loading was equal to the CEC, the linear adsorption isotherm was the most appropriate. The difference in adsorption performance of several adsorbents was discussed from the point of view of the interlayer arrangement of the HDTMA. The kinetics of pertechnetate adsorption on HDTMA-bentonites was tested and analyzed using different surface reaction- and diffusion-based kinetic models. For all the investigated adsorbents, the most appropriate kinetic model was the pseudo-second-order kinetics model. The obtained adsorption capacities were and HDTMA-bentonites with HDTMA loadings exceeding CEC value should be regarded as very promising adsorbents for the remediation of Tc-99 polluted waters.
PB  - Elsevier
T2  - Applied Clay Science
T1  - Removal of Tc-99(VII) by organo-modified bentonite
VL  - 95
SP  - 294
EP  - 302
DO  - 10.1016/j.clay.2014.04.027
ER  - 

@article{
author = "Milutinović Nikolić, Aleksandra and Maksin, Danijela and Jović-Jovičić, Nataša and Mirkovic, M. and Stanković, Dragana and Mojović, Zorica and Banković, Predrag",
year = "2014",
abstract = "(99)Technetium is one of the largest components of nuclear waste material. In aqueous solutions Tc-99 is present as the pertechnetate oxoanion, (TcO4-)-Tc-99, which is highly soluble and mobile in groundwater under oxidizing conditions, thus posing a major environmental concern. In this study, a series of organo-modified bentonite clay samples was tested as adsorbents for the removal of radioactive (TcO4-)-Tc-99 from aqueous solution at room temperature. The influence of the hexadecyl trimethylammonium (HDTMA)/bentonite ratio on the adsorption ability of the organobentonites was investigated. It was found that the adsorbent in which the exchangeable cations were only partially substituted with HDTMA showed very low affinity toward pertechnetate. On the other hand, the adsorbents in which the HDTMA loading exceeded the cation exchange capacity (CEC) value had high efficiency. The behavior of such adsorbents was best described by a Freundlich isotherm, while for the sample in which the HDTMA loading was equal to the CEC, the linear adsorption isotherm was the most appropriate. The difference in adsorption performance of several adsorbents was discussed from the point of view of the interlayer arrangement of the HDTMA. The kinetics of pertechnetate adsorption on HDTMA-bentonites was tested and analyzed using different surface reaction- and diffusion-based kinetic models. For all the investigated adsorbents, the most appropriate kinetic model was the pseudo-second-order kinetics model. The obtained adsorption capacities were and HDTMA-bentonites with HDTMA loadings exceeding CEC value should be regarded as very promising adsorbents for the remediation of Tc-99 polluted waters.",
publisher = "Elsevier",
journal = "Applied Clay Science",
title = "Removal of Tc-99(VII) by organo-modified bentonite",
volume = "95",
pages = "294-302",
doi = "10.1016/j.clay.2014.04.027"
}

Milutinović Nikolić, A., Maksin, D., Jović-Jovičić, N., Mirkovic, M., Stanković, D., Mojović, Z.,& Banković, P.. (2014). Removal of Tc-99(VII) by organo-modified bentonite. in Applied Clay Science
Elsevier., 95, 294-302.
https://doi.org/10.1016/j.clay.2014.04.027

Milutinović Nikolić A, Maksin D, Jović-Jovičić N, Mirkovic M, Stanković D, Mojović Z, Banković P. Removal of Tc-99(VII) by organo-modified bentonite. in Applied Clay Science. 2014;95:294-302.
doi:10.1016/j.clay.2014.04.027 .

Milutinović Nikolić, Aleksandra, Maksin, Danijela, Jović-Jovičić, Nataša, Mirkovic, M., Stanković, Dragana, Mojović, Zorica, Banković, Predrag, "Removal of Tc-99(VII) by organo-modified bentonite" in Applied Clay Science, 95 (2014):294-302,
https://doi.org/10.1016/j.clay.2014.04.027 . .