TY  - JOUR
AU  - Bobić, Biljana
AU  - Bobić, Ilija
AU  - Vencl, Aleksandar
AU  - Babić, Miroslav
AU  - Mitrovic, Slobodan
PY  - 2016
UR  - http://www.tribology.rs/journals/2016/2016-1.html
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/3652
AB  - The corrosion behavior of particulate ZA27/SiCp composites in an aerated sodium chloride solution was studied. The composites were synthesized via compocasting with addition of 1, 3 and 5 wt.% SiC particles in the matrix alloy. Composite samples were immersed for 30 days in the 3.5 wt.% NaCl solution open to the atmospheric air. Surface appearance and microstructure of the composites were examined by means of optical microscopy and scanning electron microscopy, while corrosion rates of the composites were determined using the weight loss method. It was revealed that SiC particles were not influenced by corrosion. General uniform corrosion occurred in the composite matrices, mainly in the region of the η phase. Local corrosion was noticed in micro-cracks and near clusters of particulate reinforcements. Results of microstructural examinations and immersion test indicate a slightly lower corrosion resistance of the ZA27/SiCp composites compared to that of the matrix alloy.
PB  - Serbia : University of Kragujevac
T2  - Tribology in Industry
T1  - Corrosion behavior of compocasted ZA27/SiCp composites in sodium chloride solution
VL  - 38
IS  - 1
SP  - 115
EP  - 120
UR  - https://hdl.handle.net/21.15107/rcub_cer_3652
ER  - 

@article{
author = "Bobić, Biljana and Bobić, Ilija and Vencl, Aleksandar and Babić, Miroslav and Mitrovic, Slobodan",
year = "2016",
abstract = "The corrosion behavior of particulate ZA27/SiCp composites in an aerated sodium chloride solution was studied. The composites were synthesized via compocasting with addition of 1, 3 and 5 wt.% SiC particles in the matrix alloy. Composite samples were immersed for 30 days in the 3.5 wt.% NaCl solution open to the atmospheric air. Surface appearance and microstructure of the composites were examined by means of optical microscopy and scanning electron microscopy, while corrosion rates of the composites were determined using the weight loss method. It was revealed that SiC particles were not influenced by corrosion. General uniform corrosion occurred in the composite matrices, mainly in the region of the η phase. Local corrosion was noticed in micro-cracks and near clusters of particulate reinforcements. Results of microstructural examinations and immersion test indicate a slightly lower corrosion resistance of the ZA27/SiCp composites compared to that of the matrix alloy.",
publisher = "Serbia : University of Kragujevac",
journal = "Tribology in Industry",
title = "Corrosion behavior of compocasted ZA27/SiCp composites in sodium chloride solution",
volume = "38",
number = "1",
pages = "115-120",
url = "https://hdl.handle.net/21.15107/rcub_cer_3652"
}

Bobić, B., Bobić, I., Vencl, A., Babić, M.,& Mitrovic, S.. (2016). Corrosion behavior of compocasted ZA27/SiCp composites in sodium chloride solution. in Tribology in Industry
Serbia : University of Kragujevac., 38(1), 115-120.
https://hdl.handle.net/21.15107/rcub_cer_3652

Bobić B, Bobić I, Vencl A, Babić M, Mitrovic S. Corrosion behavior of compocasted ZA27/SiCp composites in sodium chloride solution. in Tribology in Industry. 2016;38(1):115-120.
https://hdl.handle.net/21.15107/rcub_cer_3652 .

Bobić, Biljana, Bobić, Ilija, Vencl, Aleksandar, Babić, Miroslav, Mitrovic, Slobodan, "Corrosion behavior of compocasted ZA27/SiCp composites in sodium chloride solution" in Tribology in Industry, 38, no. 1 (2016):115-120,
https://hdl.handle.net/21.15107/rcub_cer_3652 .

TY  - JOUR
AU  - Bobić, Ilija
AU  - Ružić, Jovana
AU  - Bobić, Biljana
AU  - Babić, Miroslav
AU  - Vencl, Aleksandar
AU  - Mitrovic, Slobodan
PY  - 2014
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/1566
AB  - Hybrid A356/SiCp/Gr(p) composites were produced via compo-casting using the A356 aluminum alloy as the composite matrix, with silicon carbide microparticles (SiCp) and graphite macroparticles (Gr(p)) as reinforcements. The effect of the thixocasting process on the microstructure of a modified A356 alloy (with 0.03 mass% of strontium) was considered. The microstructures of the thixocast A356 alloy and the synthesized composite materials were examined by means of optical microscopy (OM), scanning electron microscopy (SEM), energy dispersive X-ray spectrometry (EDS) and X-ray diffraction (XRD). The fracture surfaces of the composite matrix and the composites were also analyzed. The thixocast A356 alloy and the composites were subjected to artificial aging after a solution heat treatment. Aging kinetics was followed by hardness measurements. Differential scanning calorimetry (DSC) was applied to reveal the presence of phases formed during artificial aging. The composites reached maximum hardness faster than the thixocast A356 alloy. The time required to attain peak hardness decreases with the increase in the content of particulate reinforcements.
PB  - Elsevier Science Sa, Lausanne
T2  - Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing
T1  - Microstructural characterization and artificial aging of compo-casted hybrid A356/SiCp/Gr(p) composites with graphite macroparticles
VL  - 612
SP  - 7
EP  - 15
DO  - 10.1016/j.msea.2014.06.028
ER  - 

@article{
author = "Bobić, Ilija and Ružić, Jovana and Bobić, Biljana and Babić, Miroslav and Vencl, Aleksandar and Mitrovic, Slobodan",
year = "2014",
abstract = "Hybrid A356/SiCp/Gr(p) composites were produced via compo-casting using the A356 aluminum alloy as the composite matrix, with silicon carbide microparticles (SiCp) and graphite macroparticles (Gr(p)) as reinforcements. The effect of the thixocasting process on the microstructure of a modified A356 alloy (with 0.03 mass% of strontium) was considered. The microstructures of the thixocast A356 alloy and the synthesized composite materials were examined by means of optical microscopy (OM), scanning electron microscopy (SEM), energy dispersive X-ray spectrometry (EDS) and X-ray diffraction (XRD). The fracture surfaces of the composite matrix and the composites were also analyzed. The thixocast A356 alloy and the composites were subjected to artificial aging after a solution heat treatment. Aging kinetics was followed by hardness measurements. Differential scanning calorimetry (DSC) was applied to reveal the presence of phases formed during artificial aging. The composites reached maximum hardness faster than the thixocast A356 alloy. The time required to attain peak hardness decreases with the increase in the content of particulate reinforcements.",
publisher = "Elsevier Science Sa, Lausanne",
journal = "Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing",
title = "Microstructural characterization and artificial aging of compo-casted hybrid A356/SiCp/Gr(p) composites with graphite macroparticles",
volume = "612",
pages = "7-15",
doi = "10.1016/j.msea.2014.06.028"
}

Bobić, I., Ružić, J., Bobić, B., Babić, M., Vencl, A.,& Mitrovic, S.. (2014). Microstructural characterization and artificial aging of compo-casted hybrid A356/SiCp/Gr(p) composites with graphite macroparticles. in Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing
Elsevier Science Sa, Lausanne., 612, 7-15.
https://doi.org/10.1016/j.msea.2014.06.028

Bobić I, Ružić J, Bobić B, Babić M, Vencl A, Mitrovic S. Microstructural characterization and artificial aging of compo-casted hybrid A356/SiCp/Gr(p) composites with graphite macroparticles. in Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing. 2014;612:7-15.
doi:10.1016/j.msea.2014.06.028 .

Bobić, Ilija, Ružić, Jovana, Bobić, Biljana, Babić, Miroslav, Vencl, Aleksandar, Mitrovic, Slobodan, "Microstructural characterization and artificial aging of compo-casted hybrid A356/SiCp/Gr(p) composites with graphite macroparticles" in Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 612 (2014):7-15,
https://doi.org/10.1016/j.msea.2014.06.028 . .