TY  - JOUR
AU  - Đorđević, Aleksandar
AU  - Premović, Milena
AU  - Minić, Duško
AU  - Ćosović, Vladan
AU  - Živković, Milutin
AU  - Manasijević, Dragan
AU  - Kolarević, Milan
PY  - 2018
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/2305
AB  - The paper reports comparative experimental and thermodynamic calculation of a Cu-In-Ni ternary system. An isothermal section of the Cu-In-Ni system at 300 degrees C was extrapolated using optimized thermodynamic parameters for the constitutive binary systems from literature. Microstructural and phase composition analysis were carried out using scanning electron microscopy coupled with energy dispersive spectrometry (SEM-EDS) and X-ray powder diffraction (XRD) technique. Brinell hardness and electrical conductivity of a selected number of alloy samples with compositions along three vertical sections (Cu-In0.5Ni0.5, In-Cu0.8Ni0.2, and x(In) = 0.4) of the studied Cu-In-Ni system were experimentally determined. Based on the obtained experimental results and by using appropriate mathematical models values of hardness and electrical conductivity for the whole ternary system were predicted. A close agreement between calculations and experimental results was obtained both in case of thermodynamic, electrical conductivity and hardness predictions.
PB  - Universidade Federal de Sao Carlos
T2  - Materials Research-Ibero-American Journal of Materials
T1  - Experimental Evaluation of 300 degrees C section of Cu-In-Ni Phase Diagram, Hardness and Electrical Conductivity of Selected Alloy
VL  - 21
IS  - 3
SP  - e20170699
DO  - 10.1590/1980-5373-MR-2017-0699
ER  - 

@article{
author = "Đorđević, Aleksandar and Premović, Milena and Minić, Duško and Ćosović, Vladan and Živković, Milutin and Manasijević, Dragan and Kolarević, Milan",
year = "2018",
abstract = "The paper reports comparative experimental and thermodynamic calculation of a Cu-In-Ni ternary system. An isothermal section of the Cu-In-Ni system at 300 degrees C was extrapolated using optimized thermodynamic parameters for the constitutive binary systems from literature. Microstructural and phase composition analysis were carried out using scanning electron microscopy coupled with energy dispersive spectrometry (SEM-EDS) and X-ray powder diffraction (XRD) technique. Brinell hardness and electrical conductivity of a selected number of alloy samples with compositions along three vertical sections (Cu-In0.5Ni0.5, In-Cu0.8Ni0.2, and x(In) = 0.4) of the studied Cu-In-Ni system were experimentally determined. Based on the obtained experimental results and by using appropriate mathematical models values of hardness and electrical conductivity for the whole ternary system were predicted. A close agreement between calculations and experimental results was obtained both in case of thermodynamic, electrical conductivity and hardness predictions.",
publisher = "Universidade Federal de Sao Carlos",
journal = "Materials Research-Ibero-American Journal of Materials",
title = "Experimental Evaluation of 300 degrees C section of Cu-In-Ni Phase Diagram, Hardness and Electrical Conductivity of Selected Alloy",
volume = "21",
number = "3",
pages = "e20170699",
doi = "10.1590/1980-5373-MR-2017-0699"
}

Đorđević, A., Premović, M., Minić, D., Ćosović, V., Živković, M., Manasijević, D.,& Kolarević, M.. (2018). Experimental Evaluation of 300 degrees C section of Cu-In-Ni Phase Diagram, Hardness and Electrical Conductivity of Selected Alloy. in Materials Research-Ibero-American Journal of Materials
Universidade Federal de Sao Carlos., 21(3), e20170699.
https://doi.org/10.1590/1980-5373-MR-2017-0699

Đorđević A, Premović M, Minić D, Ćosović V, Živković M, Manasijević D, Kolarević M. Experimental Evaluation of 300 degrees C section of Cu-In-Ni Phase Diagram, Hardness and Electrical Conductivity of Selected Alloy. in Materials Research-Ibero-American Journal of Materials. 2018;21(3):e20170699.
doi:10.1590/1980-5373-MR-2017-0699 .

Đorđević, Aleksandar, Premović, Milena, Minić, Duško, Ćosović, Vladan, Živković, Milutin, Manasijević, Dragan, Kolarević, Milan, "Experimental Evaluation of 300 degrees C section of Cu-In-Ni Phase Diagram, Hardness and Electrical Conductivity of Selected Alloy" in Materials Research-Ibero-American Journal of Materials, 21, no. 3 (2018):e20170699,
https://doi.org/10.1590/1980-5373-MR-2017-0699 . .

TY  - JOUR
AU  - Minić, Duško
AU  - Premović, Milena
AU  - Kolarevic, Milan
AU  - Ćosović, Vladan
AU  - Manasijević, Dragan
AU  - Živković, Dragana
PY  - 2013
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/1202
AB  - Lead-free solders with copper are considered as a possible substitution for standard lead-tin solders. Ternary Bi-Cu-In system is a potential soldering material based on copper. For a more complete characterization of the ternary Bi-Cu-In system, alloys from the three vertical sections were investigated using microstructural analysis as well as by electrical conductivity and Brinell hardness measurements. The microstructures of the alloys were investigated at room temperature by application of scanning electron microscopy combined with energy dispersive spectrometry and optical microscopy. Isolines of electrical conductivity and hardness for the entire Bi-Cu-In system were calculated using regression models. In addition, a thermodynamic assessment of the system has been carried out by calculation of the isothermal section at 25 A degrees C and description of the liquidus surface using the CALPHAD method. Experimental and analytical results were found to be in a good agreement.
PB  - Springer, New York
T2  - Journal of Materials Engineering and Performance
T1  - Description of the Liquidus Surface and Characterization of Alloys of the Ternary Bi-Cu-In System
VL  - 22
IS  - 8
SP  - 2343
EP  - 2350
DO  - 10.1007/s11665-013-0493-3
ER  - 

@article{
author = "Minić, Duško and Premović, Milena and Kolarevic, Milan and Ćosović, Vladan and Manasijević, Dragan and Živković, Dragana",
year = "2013",
abstract = "Lead-free solders with copper are considered as a possible substitution for standard lead-tin solders. Ternary Bi-Cu-In system is a potential soldering material based on copper. For a more complete characterization of the ternary Bi-Cu-In system, alloys from the three vertical sections were investigated using microstructural analysis as well as by electrical conductivity and Brinell hardness measurements. The microstructures of the alloys were investigated at room temperature by application of scanning electron microscopy combined with energy dispersive spectrometry and optical microscopy. Isolines of electrical conductivity and hardness for the entire Bi-Cu-In system were calculated using regression models. In addition, a thermodynamic assessment of the system has been carried out by calculation of the isothermal section at 25 A degrees C and description of the liquidus surface using the CALPHAD method. Experimental and analytical results were found to be in a good agreement.",
publisher = "Springer, New York",
journal = "Journal of Materials Engineering and Performance",
title = "Description of the Liquidus Surface and Characterization of Alloys of the Ternary Bi-Cu-In System",
volume = "22",
number = "8",
pages = "2343-2350",
doi = "10.1007/s11665-013-0493-3"
}

Minić, D., Premović, M., Kolarevic, M., Ćosović, V., Manasijević, D.,& Živković, D.. (2013). Description of the Liquidus Surface and Characterization of Alloys of the Ternary Bi-Cu-In System. in Journal of Materials Engineering and Performance
Springer, New York., 22(8), 2343-2350.
https://doi.org/10.1007/s11665-013-0493-3

Minić D, Premović M, Kolarevic M, Ćosović V, Manasijević D, Živković D. Description of the Liquidus Surface and Characterization of Alloys of the Ternary Bi-Cu-In System. in Journal of Materials Engineering and Performance. 2013;22(8):2343-2350.
doi:10.1007/s11665-013-0493-3 .

Minić, Duško, Premović, Milena, Kolarevic, Milan, Ćosović, Vladan, Manasijević, Dragan, Živković, Dragana, "Description of the Liquidus Surface and Characterization of Alloys of the Ternary Bi-Cu-In System" in Journal of Materials Engineering and Performance, 22, no. 8 (2013):2343-2350,
https://doi.org/10.1007/s11665-013-0493-3 . .

TY  - JOUR
AU  - Minić, Duško
AU  - Kolarevic, Milan
AU  - Manasijević, Dragan
AU  - Ćosović, Vladan
AU  - Živković, Dragana
AU  - Talijan, Nadežda M.
AU  - Marković, Miljana
PY  - 2012
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/983
AB  - Given that Sn-based lead-free solders are considered as possible substitution for standard lead-tin solders, properties of the alloys from ternary Bi-Sb-Sn system were characterized by microstructural SEM-EDS analysis, Brinell hardness tests, and electrical conductivity measurements. Isothermal cross section at 298 K and liquidus surface projection were calculated by application of CALPHAD method and software package PANDAT 8.1. The experimentally determined phase compositions in analyzed microstructures were found to be in a good agreement with phases on calculated cross sections.
PB  - Walter De Gruyter & Co, Berlin
T2  - High Temperature Materials and Processes
T1  - Characterization of Alloys and Liquidus Projections of Ternary Bi-Sb-Sn system
VL  - 31
IS  - 1
SP  - 19
EP  - 25
DO  - 10.1515/HTMP.2011.124
ER  - 

@article{
author = "Minić, Duško and Kolarevic, Milan and Manasijević, Dragan and Ćosović, Vladan and Živković, Dragana and Talijan, Nadežda M. and Marković, Miljana",
year = "2012",
abstract = "Given that Sn-based lead-free solders are considered as possible substitution for standard lead-tin solders, properties of the alloys from ternary Bi-Sb-Sn system were characterized by microstructural SEM-EDS analysis, Brinell hardness tests, and electrical conductivity measurements. Isothermal cross section at 298 K and liquidus surface projection were calculated by application of CALPHAD method and software package PANDAT 8.1. The experimentally determined phase compositions in analyzed microstructures were found to be in a good agreement with phases on calculated cross sections.",
publisher = "Walter De Gruyter & Co, Berlin",
journal = "High Temperature Materials and Processes",
title = "Characterization of Alloys and Liquidus Projections of Ternary Bi-Sb-Sn system",
volume = "31",
number = "1",
pages = "19-25",
doi = "10.1515/HTMP.2011.124"
}

Minić, D., Kolarevic, M., Manasijević, D., Ćosović, V., Živković, D., Talijan, N. M.,& Marković, M.. (2012). Characterization of Alloys and Liquidus Projections of Ternary Bi-Sb-Sn system. in High Temperature Materials and Processes
Walter De Gruyter & Co, Berlin., 31(1), 19-25.
https://doi.org/10.1515/HTMP.2011.124

Minić D, Kolarevic M, Manasijević D, Ćosović V, Živković D, Talijan NM, Marković M. Characterization of Alloys and Liquidus Projections of Ternary Bi-Sb-Sn system. in High Temperature Materials and Processes. 2012;31(1):19-25.
doi:10.1515/HTMP.2011.124 .

Minić, Duško, Kolarevic, Milan, Manasijević, Dragan, Ćosović, Vladan, Živković, Dragana, Talijan, Nadežda M., Marković, Miljana, "Characterization of Alloys and Liquidus Projections of Ternary Bi-Sb-Sn system" in High Temperature Materials and Processes, 31, no. 1 (2012):19-25,
https://doi.org/10.1515/HTMP.2011.124 . .