TY  - JOUR
AU  - Janković, Zoran
AU  - Pavlović, Miroslav M.
AU  - Pantović Pavlović, Marijana
AU  - Pavlović, Miomir
AU  - Nikolić, Nebojša D.
AU  - Stevanović, Jasmina
AU  - Prsic, S.
PY  - 2018
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/2346
AB  - The results of experimental studies of the properties of composite materials based on poly(methylmetacrylate) (PMMA) matrices filled with electrolytic copper powder, having very high dendritic structure, are presented in this manuscript. Copper powder volume fractions used as filler in all prepared composites were varied in the range of 0.5 - 8.8 %(v/v). The samples were prepared by hot molding injection at 180 degrees C. Influence of particle size and morphology on the conductivity and percolation threshold and thermal properties of the composites were examined and characterization included: Scanning Electron Microscopy (SEM), Energy-dispersive X-ray spectroscopy (EDS), Thermogravimetric Analysis (TGA), Differential Scanning Calorimetry (DSC), Atomic Forces Microscopy (AFM). Composites have shown improvement of thermal characteristics in relation to pure polymer. Presence of three dimensional conductive pathways was confirmed. The obtained percolation threshold of 2.89 %(v/v) is about three times lower than the one stated in the literature, which is ascribed to different morphology of filler used in investigation.
PB  - Belgrade : ESG
T2  - International Journal of Electrochemical Science
T1  - Electrical and Thermal Properties of Poly(methylmetacrylate) Composites Filled With Electrolytic Copper Powder
VL  - 13
IS  - 1
SP  - 45
EP  - 57
DO  - 10.20964/2018.01.24
ER  - 

@article{
author = "Janković, Zoran and Pavlović, Miroslav M. and Pantović Pavlović, Marijana and Pavlović, Miomir and Nikolić, Nebojša D. and Stevanović, Jasmina and Prsic, S.",
year = "2018",
abstract = "The results of experimental studies of the properties of composite materials based on poly(methylmetacrylate) (PMMA) matrices filled with electrolytic copper powder, having very high dendritic structure, are presented in this manuscript. Copper powder volume fractions used as filler in all prepared composites were varied in the range of 0.5 - 8.8 %(v/v). The samples were prepared by hot molding injection at 180 degrees C. Influence of particle size and morphology on the conductivity and percolation threshold and thermal properties of the composites were examined and characterization included: Scanning Electron Microscopy (SEM), Energy-dispersive X-ray spectroscopy (EDS), Thermogravimetric Analysis (TGA), Differential Scanning Calorimetry (DSC), Atomic Forces Microscopy (AFM). Composites have shown improvement of thermal characteristics in relation to pure polymer. Presence of three dimensional conductive pathways was confirmed. The obtained percolation threshold of 2.89 %(v/v) is about three times lower than the one stated in the literature, which is ascribed to different morphology of filler used in investigation.",
publisher = "Belgrade : ESG",
journal = "International Journal of Electrochemical Science",
title = "Electrical and Thermal Properties of Poly(methylmetacrylate) Composites Filled With Electrolytic Copper Powder",
volume = "13",
number = "1",
pages = "45-57",
doi = "10.20964/2018.01.24"
}

Janković, Z., Pavlović, M. M., Pantović Pavlović, M., Pavlović, M., Nikolić, N. D., Stevanović, J.,& Prsic, S.. (2018). Electrical and Thermal Properties of Poly(methylmetacrylate) Composites Filled With Electrolytic Copper Powder. in International Journal of Electrochemical Science
Belgrade : ESG., 13(1), 45-57.
https://doi.org/10.20964/2018.01.24

Janković Z, Pavlović MM, Pantović Pavlović M, Pavlović M, Nikolić ND, Stevanović J, Prsic S. Electrical and Thermal Properties of Poly(methylmetacrylate) Composites Filled With Electrolytic Copper Powder. in International Journal of Electrochemical Science. 2018;13(1):45-57.
doi:10.20964/2018.01.24 .

Janković, Zoran, Pavlović, Miroslav M., Pantović Pavlović, Marijana, Pavlović, Miomir, Nikolić, Nebojša D., Stevanović, Jasmina, Prsic, S., "Electrical and Thermal Properties of Poly(methylmetacrylate) Composites Filled With Electrolytic Copper Powder" in International Journal of Electrochemical Science, 13, no. 1 (2018):45-57,
https://doi.org/10.20964/2018.01.24 . .