TY  - JOUR
AU  - Putić, Lana
AU  - Stajić-Trošić, Jasna
AU  - Ćosović, Vladan
AU  - Grujić, Aleksandar
AU  - Milanović, Jovana
AU  - Pilić, Branka
AU  - Stanković, Snežana
PY  - 2023
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/5252
AB  - This study investigates the effect of surface modification by deposition of electrospun fibers on properties and performance of three different microporous polypropylene/polyethylene (PP/PE) commercial nonwoven membrane supports (Novatexx 2430, 2465 and 2473). Polyamide (nylon 6) nanofiber webs with a small number of defects and fibers of about 100 nanometer diameter were successfully deposited onto a surface of the selected membrane supports. FESEM was used to examine microstructure and morphology of the unmodified substrates and the prepared composite two-layer membranes. DSC was applied to investigate thermal stability and FT-IR analysis to confirm the chemical composition of the studied membranes. Saline water permeability tests of the prepared two-layer composite membranes were carried out. The largest pressure difference was measured for PA nanofiber/Novatexx 2430 sample, which was ascribed to a denser net structure of the membrane support and possibly to the newly formed layer of dissolved salts on the membrane surface.
PB  - Taylor and Francis
T2  - Journal of the Textile Institute
T1  - Characterization of microporous PP/PE nonwoven mats surface modified by deposition of electrospun nanofibers
VL  - 114
IS  - 1
SP  - 110
EP  - 121
DO  - 10.1080/00405000.2021.2024343
ER  - 

@article{
author = "Putić, Lana and Stajić-Trošić, Jasna and Ćosović, Vladan and Grujić, Aleksandar and Milanović, Jovana and Pilić, Branka and Stanković, Snežana",
year = "2023",
abstract = "This study investigates the effect of surface modification by deposition of electrospun fibers on properties and performance of three different microporous polypropylene/polyethylene (PP/PE) commercial nonwoven membrane supports (Novatexx 2430, 2465 and 2473). Polyamide (nylon 6) nanofiber webs with a small number of defects and fibers of about 100 nanometer diameter were successfully deposited onto a surface of the selected membrane supports. FESEM was used to examine microstructure and morphology of the unmodified substrates and the prepared composite two-layer membranes. DSC was applied to investigate thermal stability and FT-IR analysis to confirm the chemical composition of the studied membranes. Saline water permeability tests of the prepared two-layer composite membranes were carried out. The largest pressure difference was measured for PA nanofiber/Novatexx 2430 sample, which was ascribed to a denser net structure of the membrane support and possibly to the newly formed layer of dissolved salts on the membrane surface.",
publisher = "Taylor and Francis",
journal = "Journal of the Textile Institute",
title = "Characterization of microporous PP/PE nonwoven mats surface modified by deposition of electrospun nanofibers",
volume = "114",
number = "1",
pages = "110-121",
doi = "10.1080/00405000.2021.2024343"
}

Putić, L., Stajić-Trošić, J., Ćosović, V., Grujić, A., Milanović, J., Pilić, B.,& Stanković, S.. (2023). Characterization of microporous PP/PE nonwoven mats surface modified by deposition of electrospun nanofibers. in Journal of the Textile Institute
Taylor and Francis., 114(1), 110-121.
https://doi.org/10.1080/00405000.2021.2024343

Putić L, Stajić-Trošić J, Ćosović V, Grujić A, Milanović J, Pilić B, Stanković S. Characterization of microporous PP/PE nonwoven mats surface modified by deposition of electrospun nanofibers. in Journal of the Textile Institute. 2023;114(1):110-121.
doi:10.1080/00405000.2021.2024343 .

Putić, Lana, Stajić-Trošić, Jasna, Ćosović, Vladan, Grujić, Aleksandar, Milanović, Jovana, Pilić, Branka, Stanković, Snežana, "Characterization of microporous PP/PE nonwoven mats surface modified by deposition of electrospun nanofibers" in Journal of the Textile Institute, 114, no. 1 (2023):110-121,
https://doi.org/10.1080/00405000.2021.2024343 . .

TY  - JOUR
AU  - Grujić, Aleksandar
AU  - Nedeljković, Dragutin
AU  - Stajić-Trošić, Jasna
AU  - Stijepović, Mirko
AU  - Alnouri, Sabla
AU  - Perišić, Srđan
PY  - 2023
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/6302
AB  - Polymer-bonded magnets are a class of composite material that combines the magnetic properties of metal particles and the molding possibility of a polymeric matrix. This class of materials has shown huge potential for various applications in industry and engineering. Traditional research in this field has so far mainly focused on mechanical, electrical or magnetic properties of the composite, or on particle size and distribution. This examination of synthesized Nd-Fe-B-epoxy composite materials includes the mutual comparison of impact toughness, fatigue, and the structural, thermal, dynamic-mechanical, and magnetic behavior of materials with different content of magnetic Nd-Fe-B particles, in a wide range from 5 to 95 wt.%. This paper tests the influence of the Nd-Fe-B content on impacting the toughness of the composite material, as this relationship has not been tested before. The results show that impact toughness decreases, while magnetic properties increase, along with increasing content of Nd-Fe-B. Based on the observed trends, selected samples have been analyzed in terms of crack growth rate behavior. Analysis of the fracture surface morphology reveals the formation of a stable and homogeneous composite material. The synthesis route, the applied methods of characterization and analysis, and the comparison of the obtained results can provide a composite material with optimum properties for a specific purpose.
PB  - Switzerland : Multidisciplinary Digital Publishing Institute (MDPI)
T2  - Polymers
T1  - Magneto-Mechanical and Thermal Properties of Nd-Fe-B-Epoxy-Bonded Composite Materials
VL  - 15
IS  - 8
SP  - 1894
DO  - 10.3390/polym15081894
ER  - 

@article{
author = "Grujić, Aleksandar and Nedeljković, Dragutin and Stajić-Trošić, Jasna and Stijepović, Mirko and Alnouri, Sabla and Perišić, Srđan",
year = "2023",
abstract = "Polymer-bonded magnets are a class of composite material that combines the magnetic properties of metal particles and the molding possibility of a polymeric matrix. This class of materials has shown huge potential for various applications in industry and engineering. Traditional research in this field has so far mainly focused on mechanical, electrical or magnetic properties of the composite, or on particle size and distribution. This examination of synthesized Nd-Fe-B-epoxy composite materials includes the mutual comparison of impact toughness, fatigue, and the structural, thermal, dynamic-mechanical, and magnetic behavior of materials with different content of magnetic Nd-Fe-B particles, in a wide range from 5 to 95 wt.%. This paper tests the influence of the Nd-Fe-B content on impacting the toughness of the composite material, as this relationship has not been tested before. The results show that impact toughness decreases, while magnetic properties increase, along with increasing content of Nd-Fe-B. Based on the observed trends, selected samples have been analyzed in terms of crack growth rate behavior. Analysis of the fracture surface morphology reveals the formation of a stable and homogeneous composite material. The synthesis route, the applied methods of characterization and analysis, and the comparison of the obtained results can provide a composite material with optimum properties for a specific purpose.",
publisher = "Switzerland : Multidisciplinary Digital Publishing Institute (MDPI)",
journal = "Polymers",
title = "Magneto-Mechanical and Thermal Properties of Nd-Fe-B-Epoxy-Bonded Composite Materials",
volume = "15",
number = "8",
pages = "1894",
doi = "10.3390/polym15081894"
}

Grujić, A., Nedeljković, D., Stajić-Trošić, J., Stijepović, M., Alnouri, S.,& Perišić, S.. (2023). Magneto-Mechanical and Thermal Properties of Nd-Fe-B-Epoxy-Bonded Composite Materials. in Polymers
Switzerland : Multidisciplinary Digital Publishing Institute (MDPI)., 15(8), 1894.
https://doi.org/10.3390/polym15081894

Grujić A, Nedeljković D, Stajić-Trošić J, Stijepović M, Alnouri S, Perišić S. Magneto-Mechanical and Thermal Properties of Nd-Fe-B-Epoxy-Bonded Composite Materials. in Polymers. 2023;15(8):1894.
doi:10.3390/polym15081894 .

Grujić, Aleksandar, Nedeljković, Dragutin, Stajić-Trošić, Jasna, Stijepović, Mirko, Alnouri, Sabla, Perišić, Srđan, "Magneto-Mechanical and Thermal Properties of Nd-Fe-B-Epoxy-Bonded Composite Materials" in Polymers, 15, no. 8 (2023):1894,
https://doi.org/10.3390/polym15081894 . .

TY  - JOUR
AU  - Stijepović, Mirko
AU  - Alnouri, Sabla
AU  - Stijepović, Vladimir
AU  - Stajić-Trošić, Jasna
AU  - Grozdanić, Nikola
AU  - Grujić, Aleksandar
PY  - 2022
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/5367
AB  - This paper introduces solute-solvent interactions onto a universal transport modeling approach that has been recently introduced for predicting RO membrane performance. The mathematical modeling framework utilizes chemical potential calculations rather than concentrations, and is based on the standard solution diffusion theory. Accounting for solute-solvent interactions were all based on a Maxwell-Stefan approach for reduced motion of particles in membrane pores. Overall, the proposed model is very effective in generating all the necessary parameters, especially for estimating the water permeability, as well as the various permeabilities associated with both, monovalent and divalent types of ion in the solution. Moreover, the effects of osmotic pressure on the respective species and water flux can be estimated. The proposed RO model was found to be very efficient in predicting the performance of various types of membranes, and its performance has been validated against available membrane performance data obtained from various sources. Since the attained model predictions are in very good agreement with actual membrane performance data, the proposed model can be considered as a very effective tool for use in commercial process simulator platforms.
PB  - Elsevier
T2  - Computers and Chemical Engineering
T1  - The development of a process simulator transport model for RO systems
VL  - 161
SP  - 107783
DO  - 10.1016/j.compchemeng.2022.107783
ER  - 

@article{
author = "Stijepović, Mirko and Alnouri, Sabla and Stijepović, Vladimir and Stajić-Trošić, Jasna and Grozdanić, Nikola and Grujić, Aleksandar",
year = "2022",
abstract = "This paper introduces solute-solvent interactions onto a universal transport modeling approach that has been recently introduced for predicting RO membrane performance. The mathematical modeling framework utilizes chemical potential calculations rather than concentrations, and is based on the standard solution diffusion theory. Accounting for solute-solvent interactions were all based on a Maxwell-Stefan approach for reduced motion of particles in membrane pores. Overall, the proposed model is very effective in generating all the necessary parameters, especially for estimating the water permeability, as well as the various permeabilities associated with both, monovalent and divalent types of ion in the solution. Moreover, the effects of osmotic pressure on the respective species and water flux can be estimated. The proposed RO model was found to be very efficient in predicting the performance of various types of membranes, and its performance has been validated against available membrane performance data obtained from various sources. Since the attained model predictions are in very good agreement with actual membrane performance data, the proposed model can be considered as a very effective tool for use in commercial process simulator platforms.",
publisher = "Elsevier",
journal = "Computers and Chemical Engineering",
title = "The development of a process simulator transport model for RO systems",
volume = "161",
pages = "107783",
doi = "10.1016/j.compchemeng.2022.107783"
}

Stijepović, M., Alnouri, S., Stijepović, V., Stajić-Trošić, J., Grozdanić, N.,& Grujić, A.. (2022). The development of a process simulator transport model for RO systems. in Computers and Chemical Engineering
Elsevier., 161, 107783.
https://doi.org/10.1016/j.compchemeng.2022.107783

Stijepović M, Alnouri S, Stijepović V, Stajić-Trošić J, Grozdanić N, Grujić A. The development of a process simulator transport model for RO systems. in Computers and Chemical Engineering. 2022;161:107783.
doi:10.1016/j.compchemeng.2022.107783 .

Stijepović, Mirko, Alnouri, Sabla, Stijepović, Vladimir, Stajić-Trošić, Jasna, Grozdanić, Nikola, Grujić, Aleksandar, "The development of a process simulator transport model for RO systems" in Computers and Chemical Engineering, 161 (2022):107783,
https://doi.org/10.1016/j.compchemeng.2022.107783 . .

TY  - JOUR
AU  - Putić, Lana
AU  - Alnouri, Sabla Y.
AU  - Stijepović, Vladimir
AU  - Stajić-Trošić, Jasna
AU  - Grujić, Aleksandar
AU  - Stijepović, Mirko Z.
PY  - 2021
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/4503
AB  - This paper presents a new transport model for reverse osmosis (RO) systems, which combines irreversible thermodynamics, together with solution-diffusion theory. The simplifications adopted by the classical theory for solution-diffusion mechanisms have been found to be quite lacking when it comes to predicting the separation of multicomponent mixtures. The presented model accounts for multicomponent computations through the application of thermodynamic property models, as a means to predict the various interactions amongst the species that are present in solution. The developed transport model is relatively easy to implement, and can be utilized alongside existing equipment and thermodynamic property models. The applicability of the model presented in this paper has been tested on three different case studies, including a case that investigates single component behavior and a case that investigates multicomponent behavior The proposed model shows very good agreement with experimental results.
PB  - Elsevier
T2  - Computers and Chemical Engineering
T1  - A universal transportation model for reverse osmosis systems
VL  - 148
SP  - 107264
DO  - 10.1016/j.compchemeng.2021.107264
ER  - 

@article{
author = "Putić, Lana and Alnouri, Sabla Y. and Stijepović, Vladimir and Stajić-Trošić, Jasna and Grujić, Aleksandar and Stijepović, Mirko Z.",
year = "2021",
abstract = "This paper presents a new transport model for reverse osmosis (RO) systems, which combines irreversible thermodynamics, together with solution-diffusion theory. The simplifications adopted by the classical theory for solution-diffusion mechanisms have been found to be quite lacking when it comes to predicting the separation of multicomponent mixtures. The presented model accounts for multicomponent computations through the application of thermodynamic property models, as a means to predict the various interactions amongst the species that are present in solution. The developed transport model is relatively easy to implement, and can be utilized alongside existing equipment and thermodynamic property models. The applicability of the model presented in this paper has been tested on three different case studies, including a case that investigates single component behavior and a case that investigates multicomponent behavior The proposed model shows very good agreement with experimental results.",
publisher = "Elsevier",
journal = "Computers and Chemical Engineering",
title = "A universal transportation model for reverse osmosis systems",
volume = "148",
pages = "107264",
doi = "10.1016/j.compchemeng.2021.107264"
}

Putić, L., Alnouri, S. Y., Stijepović, V., Stajić-Trošić, J., Grujić, A.,& Stijepović, M. Z.. (2021). A universal transportation model for reverse osmosis systems. in Computers and Chemical Engineering
Elsevier., 148, 107264.
https://doi.org/10.1016/j.compchemeng.2021.107264

Putić L, Alnouri SY, Stijepović V, Stajić-Trošić J, Grujić A, Stijepović MZ. A universal transportation model for reverse osmosis systems. in Computers and Chemical Engineering. 2021;148:107264.
doi:10.1016/j.compchemeng.2021.107264 .

Putić, Lana, Alnouri, Sabla Y., Stijepović, Vladimir, Stajić-Trošić, Jasna, Grujić, Aleksandar, Stijepović, Mirko Z., "A universal transportation model for reverse osmosis systems" in Computers and Chemical Engineering, 148 (2021):107264,
https://doi.org/10.1016/j.compchemeng.2021.107264 . .

TY  - JOUR
AU  - Ilić-Pajić, Jovana
AU  - Ivaniš, Gorica
AU  - Radović, Ivona
AU  - Grujić, Aleksandar
AU  - Stajić-Trošić, Jasna
AU  - Stijepović, Mirko Z.
AU  - Kijevčanin, Mirjana
PY  - 2020
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/3784
AB  - In order to reduce negative influence of fossil fuels on environment, use of various renewable resources is highly promoted. Terpenes, naturally occurring in plants, can be added to petroleum fuel as its substitute up to a certain share. Thermodynamic properties of a fuel under high pressure and moderate temperature conditions are of significant importance for engine efficiency. This work reports density measurements of pure p-cymene, α-pinene, limonene and citral at temperatures (293.15–413.15) K and pressures (0.1–60) MPa, applying an Anton Paar DMA HP measuring cell. Density data were fitted by modified Tammann-Tait equation where the absolute average percentage deviation between measured and calculated densities was about 0.010%. The obtained parameters were used to estimate the isothermal compressibility, the isobaric thermal expansion coefficient, the internal pressure, and the difference between specific heat capacity at constant pressure and at constant volume. For examined compounds, all thermodynamic properties, except the internal pressure, decrease with pressure rise along an isotherm and increase as temperature increases at a constant pressure. The intersection point of isotherms for the isobaric thermal expansion coefficient for pure citral was registered at pressure 47 MPa, while for other analyzed terpenes the intersection point is above 60 MPa, outside the measurements pressure range.
PB  - Elsevier
T2  - The Journal of Chemical Thermodynamics
T1  - Experimental densities and derived thermodynamic properties of pure p-cymene, α-pinene, limonene and citral under high pressure conditions
VL  - 144
SP  - 106065
DO  - 10.1016/j.jct.2020.106065
ER  - 

@article{
author = "Ilić-Pajić, Jovana and Ivaniš, Gorica and Radović, Ivona and Grujić, Aleksandar and Stajić-Trošić, Jasna and Stijepović, Mirko Z. and Kijevčanin, Mirjana",
year = "2020",
abstract = "In order to reduce negative influence of fossil fuels on environment, use of various renewable resources is highly promoted. Terpenes, naturally occurring in plants, can be added to petroleum fuel as its substitute up to a certain share. Thermodynamic properties of a fuel under high pressure and moderate temperature conditions are of significant importance for engine efficiency. This work reports density measurements of pure p-cymene, α-pinene, limonene and citral at temperatures (293.15–413.15) K and pressures (0.1–60) MPa, applying an Anton Paar DMA HP measuring cell. Density data were fitted by modified Tammann-Tait equation where the absolute average percentage deviation between measured and calculated densities was about 0.010%. The obtained parameters were used to estimate the isothermal compressibility, the isobaric thermal expansion coefficient, the internal pressure, and the difference between specific heat capacity at constant pressure and at constant volume. For examined compounds, all thermodynamic properties, except the internal pressure, decrease with pressure rise along an isotherm and increase as temperature increases at a constant pressure. The intersection point of isotherms for the isobaric thermal expansion coefficient for pure citral was registered at pressure 47 MPa, while for other analyzed terpenes the intersection point is above 60 MPa, outside the measurements pressure range.",
publisher = "Elsevier",
journal = "The Journal of Chemical Thermodynamics",
title = "Experimental densities and derived thermodynamic properties of pure p-cymene, α-pinene, limonene and citral under high pressure conditions",
volume = "144",
pages = "106065",
doi = "10.1016/j.jct.2020.106065"
}

Ilić-Pajić, J., Ivaniš, G., Radović, I., Grujić, A., Stajić-Trošić, J., Stijepović, M. Z.,& Kijevčanin, M.. (2020). Experimental densities and derived thermodynamic properties of pure p-cymene, α-pinene, limonene and citral under high pressure conditions. in The Journal of Chemical Thermodynamics
Elsevier., 144, 106065.
https://doi.org/10.1016/j.jct.2020.106065

Ilić-Pajić J, Ivaniš G, Radović I, Grujić A, Stajić-Trošić J, Stijepović MZ, Kijevčanin M. Experimental densities and derived thermodynamic properties of pure p-cymene, α-pinene, limonene and citral under high pressure conditions. in The Journal of Chemical Thermodynamics. 2020;144:106065.
doi:10.1016/j.jct.2020.106065 .

Ilić-Pajić, Jovana, Ivaniš, Gorica, Radović, Ivona, Grujić, Aleksandar, Stajić-Trošić, Jasna, Stijepović, Mirko Z., Kijevčanin, Mirjana, "Experimental densities and derived thermodynamic properties of pure p-cymene, α-pinene, limonene and citral under high pressure conditions" in The Journal of Chemical Thermodynamics, 144 (2020):106065,
https://doi.org/10.1016/j.jct.2020.106065 . .

TY  - JOUR
AU  - Stajčić, Aleksandar
AU  - Radović, Ivana
AU  - Ćosović, Vladan
AU  - Grujić, Aleksandar
AU  - Stajić-Trošić, Jasna
AU  - Jančić-Heinemann, Radmila
PY  - 2019
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/3232
AB  - This study presents preparation and characterization of ethyl cellulose based nanocomposites. Successful use of simple solvent casting technique provided nanocomposites with high loads of barium ferrite magnetic nanopowder in the polymer matrix, promising significant improvement of mechanical properties. Investigation of morphology revealed formation of agglomerates that are still on nanoscopic level. Nanocomposite thin films with a higher content of the magnetic powder showed substantial enhancement of break strength, elongation and microhardness compared to the pure ethyl cellulose, which was the primary aim of this research.
AB  - Ова студија представља припрему и карактеризацију нанокомпозита на бази етил целулозе. Успешна употреба једноставне технике изливања обезбедила је нанокомпозите са великим уделом магнетног нанопраха баријум ферита у полимерној матрици, обећавајући значајно побољшање механичких својстава. Истраживањем морфологије откривено је формирање агломерата који су и даље на наноскопском нивоу. Нанокомпозитни танки филмови са већим садржајем магнетног праха показали су значајно повећање прекидне чврстоће, издужења и микротврдоће у поређењу са чистом етил целулозом, што је био главни циљ овог истраживања.
PB  - Belgrade : Association for ETRAN Society
T2  - Science of Sintering
T1  - The influence of barium ferrite nanoparticles on morphological and mechanical properties of ethyl cellulose based nanocomposites
VL  - 51
IS  - 3
SP  - 277
EP  - 283
DO  - 10.2298/SOS1903277S
ER  - 

@article{
author = "Stajčić, Aleksandar and Radović, Ivana and Ćosović, Vladan and Grujić, Aleksandar and Stajić-Trošić, Jasna and Jančić-Heinemann, Radmila",
year = "2019",
abstract = "This study presents preparation and characterization of ethyl cellulose based nanocomposites. Successful use of simple solvent casting technique provided nanocomposites with high loads of barium ferrite magnetic nanopowder in the polymer matrix, promising significant improvement of mechanical properties. Investigation of morphology revealed formation of agglomerates that are still on nanoscopic level. Nanocomposite thin films with a higher content of the magnetic powder showed substantial enhancement of break strength, elongation and microhardness compared to the pure ethyl cellulose, which was the primary aim of this research., Ова студија представља припрему и карактеризацију нанокомпозита на бази етил целулозе. Успешна употреба једноставне технике изливања обезбедила је нанокомпозите са великим уделом магнетног нанопраха баријум ферита у полимерној матрици, обећавајући значајно побољшање механичких својстава. Истраживањем морфологије откривено је формирање агломерата који су и даље на наноскопском нивоу. Нанокомпозитни танки филмови са већим садржајем магнетног праха показали су значајно повећање прекидне чврстоће, издужења и микротврдоће у поређењу са чистом етил целулозом, што је био главни циљ овог истраживања.",
publisher = "Belgrade : Association for ETRAN Society",
journal = "Science of Sintering",
title = "The influence of barium ferrite nanoparticles on morphological and mechanical properties of ethyl cellulose based nanocomposites",
volume = "51",
number = "3",
pages = "277-283",
doi = "10.2298/SOS1903277S"
}

Stajčić, A., Radović, I., Ćosović, V., Grujić, A., Stajić-Trošić, J.,& Jančić-Heinemann, R.. (2019). The influence of barium ferrite nanoparticles on morphological and mechanical properties of ethyl cellulose based nanocomposites. in Science of Sintering
Belgrade : Association for ETRAN Society., 51(3), 277-283.
https://doi.org/10.2298/SOS1903277S

Stajčić A, Radović I, Ćosović V, Grujić A, Stajić-Trošić J, Jančić-Heinemann R. The influence of barium ferrite nanoparticles on morphological and mechanical properties of ethyl cellulose based nanocomposites. in Science of Sintering. 2019;51(3):277-283.
doi:10.2298/SOS1903277S .

Stajčić, Aleksandar, Radović, Ivana, Ćosović, Vladan, Grujić, Aleksandar, Stajić-Trošić, Jasna, Jančić-Heinemann, Radmila, "The influence of barium ferrite nanoparticles on morphological and mechanical properties of ethyl cellulose based nanocomposites" in Science of Sintering, 51, no. 3 (2019):277-283,
https://doi.org/10.2298/SOS1903277S . .

Stajčić, A., Popović, B., Vorkapić, M., Grujić, A.,& Stajić-Trošić, J.. (2019). Difuziona komora za ispitivanje separacionih svojstava membrana. 
University of Belgrade - Institute of Chemistry, Technology and Metallurgy..
https://hdl.handle.net/21.15107/rcub_cer_7140

Stajčić A, Popović B, Vorkapić M, Grujić A, Stajić-Trošić J. Difuziona komora za ispitivanje separacionih svojstava membrana. 2019;.
https://hdl.handle.net/21.15107/rcub_cer_7140 .

Stajčić, Aleksandar, Popović, Bogdan, Vorkapić, Miloš, Grujić, Aleksandar, Stajić-Trošić, Jasna, "Difuziona komora za ispitivanje separacionih svojstava membrana" (2019),
https://hdl.handle.net/21.15107/rcub_cer_7140 .

TY  - CONF
AU  - Putić, Lana
AU  - Kostić, Maja
AU  - Popović, Gordana
AU  - Stajić-Trošić, Jasna
AU  - Stanković, Snežana
PY  - 2019
UR  - https://www.shd.org.rs/index.php/abstracts-56
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/3294
AB  - The air permeability of textile fabrics is defined as the air passed over a surface under a certain pressure difference in a unit time. Air permeability is often used in evaluating the performance of clothing textiles and technical textiles such as air bags, sail cloth, parachutes sails and industrial textile filters. In practice, which does not have to include scientific research, it is necessary that all tests of textile materials are carried out according to the standards. In the case of air permeability, the most commonly used standard methods are ASTM D737 and ISO 9237 standards. The values of the tested property of a textile material vary very often depending on the device used and method applied. In this research, a comparison of the results of air permeability of some plain knitted fabrics was made, which were obtained using two different devices according to ASTM D737 and ISO 9237 methods. The results obtained indicated the differences in the values of air permeability for all the knitted fabrics. However, the same trend was observed in terms of the observed differences which was confirmed by the high value of the correlation coefficient (r=0.98).
AB  - Propustljivost vazduha tekstilnih materijala definiše se količinom vazduha koji pri konstantnom pritisku u jedinici vremena prođe kroz jedinicu površine materijala. Ovaj parametar se često koristi za ocenjivanje performansi odevnih tekstilnih materijala i tehničkog tekstila kao što su tkanine za vazdušne jastuke, jedra i padobrane, i industrijski tekstilni filteri. U stručnoj praksi, koja ne uključuje obavezno naučna istraživanja, neophodno je da se sva testiranja tekstilnih materijala vrše prema normama propisanim važećim standardima. Propustljivost vazduha tekstilnih materijala najčešće se ispituje standardnim metodama ASTM D737 i ISO 9237. Vrlo često se dešava da se kvantifikovane vrednosti ispitivanog svojstva tekstilnog materijala razlikuju u zavisnosti od upotrebljenog uređaja, odnosno primenjene standardne metode. Zbog toga je u okviru ovog istraživanja izvršeno poređenje rezultata propustljivosti vazduha grupe DL pletenina, koji su dobijeni primenom dva različita uređaja i dve standardizovane (ASTM D737 i ISO 9237) metode. Poređenjem dve grupe rezultata propustljivosti vazduha DL pletenina uočene su razlike u vrednosti ovog parametra kod svih ispitivanih pletenina. Ipak, zapažen je isti trend u pogledu uočenih razlika u propustljivosti vazduha pletenina, što je potvrđeno visokom vrednošću koeficijenta korelacije (r=0,98).
PB  - Serbian Chemical Society, Belgrade / Srpsko hemijsko društvo, Beograd
C3  - 56th Meeting of the Serbian chemical Society - Book of Abstracts / 56. Savetovanje Srpskog hemijskog društva - Kratki izvodi radova, Niš 7-8.9. 2019.
T1  - Comparison of methods for measurement of air permeability of textile materials
T1  - Poređenje metoda za merenje propustljivosti vazduha tekstilnih materijala
SP  - 41
UR  - https://hdl.handle.net/21.15107/rcub_cer_3294
ER  - 

@conference{
author = "Putić, Lana and Kostić, Maja and Popović, Gordana and Stajić-Trošić, Jasna and Stanković, Snežana",
year = "2019",
abstract = "The air permeability of textile fabrics is defined as the air passed over a surface under a certain pressure difference in a unit time. Air permeability is often used in evaluating the performance of clothing textiles and technical textiles such as air bags, sail cloth, parachutes sails and industrial textile filters. In practice, which does not have to include scientific research, it is necessary that all tests of textile materials are carried out according to the standards. In the case of air permeability, the most commonly used standard methods are ASTM D737 and ISO 9237 standards. The values of the tested property of a textile material vary very often depending on the device used and method applied. In this research, a comparison of the results of air permeability of some plain knitted fabrics was made, which were obtained using two different devices according to ASTM D737 and ISO 9237 methods. The results obtained indicated the differences in the values of air permeability for all the knitted fabrics. However, the same trend was observed in terms of the observed differences which was confirmed by the high value of the correlation coefficient (r=0.98)., Propustljivost vazduha tekstilnih materijala definiše se količinom vazduha koji pri konstantnom pritisku u jedinici vremena prođe kroz jedinicu površine materijala. Ovaj parametar se često koristi za ocenjivanje performansi odevnih tekstilnih materijala i tehničkog tekstila kao što su tkanine za vazdušne jastuke, jedra i padobrane, i industrijski tekstilni filteri. U stručnoj praksi, koja ne uključuje obavezno naučna istraživanja, neophodno je da se sva testiranja tekstilnih materijala vrše prema normama propisanim važećim standardima. Propustljivost vazduha tekstilnih materijala najčešće se ispituje standardnim metodama ASTM D737 i ISO 9237. Vrlo često se dešava da se kvantifikovane vrednosti ispitivanog svojstva tekstilnog materijala razlikuju u zavisnosti od upotrebljenog uređaja, odnosno primenjene standardne metode. Zbog toga je u okviru ovog istraživanja izvršeno poređenje rezultata propustljivosti vazduha grupe DL pletenina, koji su dobijeni primenom dva različita uređaja i dve standardizovane (ASTM D737 i ISO 9237) metode. Poređenjem dve grupe rezultata propustljivosti vazduha DL pletenina uočene su razlike u vrednosti ovog parametra kod svih ispitivanih pletenina. Ipak, zapažen je isti trend u pogledu uočenih razlika u propustljivosti vazduha pletenina, što je potvrđeno visokom vrednošću koeficijenta korelacije (r=0,98).",
publisher = "Serbian Chemical Society, Belgrade / Srpsko hemijsko društvo, Beograd",
journal = "56th Meeting of the Serbian chemical Society - Book of Abstracts / 56. Savetovanje Srpskog hemijskog društva - Kratki izvodi radova, Niš 7-8.9. 2019.",
title = "Comparison of methods for measurement of air permeability of textile materials, Poređenje metoda za merenje propustljivosti vazduha tekstilnih materijala",
pages = "41",
url = "https://hdl.handle.net/21.15107/rcub_cer_3294"
}

Putić, L., Kostić, M., Popović, G., Stajić-Trošić, J.,& Stanković, S.. (2019). Comparison of methods for measurement of air permeability of textile materials. in 56th Meeting of the Serbian chemical Society - Book of Abstracts / 56. Savetovanje Srpskog hemijskog društva - Kratki izvodi radova, Niš 7-8.9. 2019.
Serbian Chemical Society, Belgrade / Srpsko hemijsko društvo, Beograd., 41.
https://hdl.handle.net/21.15107/rcub_cer_3294

Putić L, Kostić M, Popović G, Stajić-Trošić J, Stanković S. Comparison of methods for measurement of air permeability of textile materials. in 56th Meeting of the Serbian chemical Society - Book of Abstracts / 56. Savetovanje Srpskog hemijskog društva - Kratki izvodi radova, Niš 7-8.9. 2019.. 2019;:41.
https://hdl.handle.net/21.15107/rcub_cer_3294 .

Putić, Lana, Kostić, Maja, Popović, Gordana, Stajić-Trošić, Jasna, Stanković, Snežana, "Comparison of methods for measurement of air permeability of textile materials" in 56th Meeting of the Serbian chemical Society - Book of Abstracts / 56. Savetovanje Srpskog hemijskog društva - Kratki izvodi radova, Niš 7-8.9. 2019. (2019):41,
https://hdl.handle.net/21.15107/rcub_cer_3294 .

TY  - JOUR
AU  - Stajčić, Aleksandar
AU  - Nedeljković, Dragutin
AU  - Panić, Vesna
AU  - Radović, Ivana
AU  - Grujić, Aleksandar
AU  - Stajić-Trošić, Jasna
AU  - Jančić-Heinemann, Radmila
PY  - 2018
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/2359
AB  - This study presents the route for preparation of the membrane-supporting materials with good mechanical behavior and adsorption properties that provide functionality and are easy to use in various environments. Polyethersulfone (PES) membrane-supported hydrogels were prepared via liquid phase inversion process with photopolymerization and monomer crosslinking. The obtained membranes had asymmetric structure containing dense skin on the top of a porous hydrogel as it is verified by scanning electron microscopy. Software analysis of the pore size revealed that fine pores enabled availability of the membrane active centers to metal cations. The membranes with a higher content of the polymer showed significantly improved mechanical properties compared with commonly used ion exchange membranes, which is crucial for the wastewater treatment application. Adsorption kinetics analysis showed that the hydrogel-rich bottom layer has significantly higher adsorption ability in comparison to the top layer. Adsorption kinetics of the bottom side was described by the first-order kinetics model, whereas for the the top side, phase-boundary controlled reaction model was used.
PB  - Hopkinton : Desalination Publications
T2  - Desalination and Water Treatment
T1  - Adsorption kinetics of polyethersulfone membrane-supported hydrogels
VL  - 131
SP  - 43
EP  - 49
DO  - 10.5004/dwt.2018.22959
ER  - 

@article{
author = "Stajčić, Aleksandar and Nedeljković, Dragutin and Panić, Vesna and Radović, Ivana and Grujić, Aleksandar and Stajić-Trošić, Jasna and Jančić-Heinemann, Radmila",
year = "2018",
abstract = "This study presents the route for preparation of the membrane-supporting materials with good mechanical behavior and adsorption properties that provide functionality and are easy to use in various environments. Polyethersulfone (PES) membrane-supported hydrogels were prepared via liquid phase inversion process with photopolymerization and monomer crosslinking. The obtained membranes had asymmetric structure containing dense skin on the top of a porous hydrogel as it is verified by scanning electron microscopy. Software analysis of the pore size revealed that fine pores enabled availability of the membrane active centers to metal cations. The membranes with a higher content of the polymer showed significantly improved mechanical properties compared with commonly used ion exchange membranes, which is crucial for the wastewater treatment application. Adsorption kinetics analysis showed that the hydrogel-rich bottom layer has significantly higher adsorption ability in comparison to the top layer. Adsorption kinetics of the bottom side was described by the first-order kinetics model, whereas for the the top side, phase-boundary controlled reaction model was used.",
publisher = "Hopkinton : Desalination Publications",
journal = "Desalination and Water Treatment",
title = "Adsorption kinetics of polyethersulfone membrane-supported hydrogels",
volume = "131",
pages = "43-49",
doi = "10.5004/dwt.2018.22959"
}

Stajčić, A., Nedeljković, D., Panić, V., Radović, I., Grujić, A., Stajić-Trošić, J.,& Jančić-Heinemann, R.. (2018). Adsorption kinetics of polyethersulfone membrane-supported hydrogels. in Desalination and Water Treatment
Hopkinton : Desalination Publications., 131, 43-49.
https://doi.org/10.5004/dwt.2018.22959

Stajčić A, Nedeljković D, Panić V, Radović I, Grujić A, Stajić-Trošić J, Jančić-Heinemann R. Adsorption kinetics of polyethersulfone membrane-supported hydrogels. in Desalination and Water Treatment. 2018;131:43-49.
doi:10.5004/dwt.2018.22959 .

Stajčić, Aleksandar, Nedeljković, Dragutin, Panić, Vesna, Radović, Ivana, Grujić, Aleksandar, Stajić-Trošić, Jasna, Jančić-Heinemann, Radmila, "Adsorption kinetics of polyethersulfone membrane-supported hydrogels" in Desalination and Water Treatment, 131 (2018):43-49,
https://doi.org/10.5004/dwt.2018.22959 . .

TY  - JOUR
AU  - Ilić-Pajić, Jovana
AU  - Stijepović, Mirko Z.
AU  - Ivaniš, Gorica
AU  - Radović, Ivona
AU  - Stajić-Trošić, Jasna
AU  - Kijevčanin, Mirjana
PY  - 2018
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/2334
AB  - SAFT equations of state have been widely used for the determination of different thermo-physical and phase equilibria properties. In order to use these equations as predictive models it is necessary to calculate the model parameters. In this work CK-SAFT and PC-SAFT equations of state were applied for the correlation of pure compounds densities in the wide ranges of temperature and pressure (288.15-413.15 K and 0.1-60 MPa, respectively). The calculations of densities for n-hexane, n-heptane, n-octane, toluene, dichloromethane and ethanol, under high pressure conditions, were performed with the new sets of parameters determined in this paper by CK-SAFT and PC-SAFT. Very good agreement between experimental and calculated density values was achieved, having absolute average percentage deviations lower than 0.5 %.
AB  - SAFT једначине стања се веома често користе за одређивање различитих термофизичких својстава, као и у описивању различитих равнотежа фаза. Да би се ови модели могли користити у предвиђању термодинамичких величина неопходно је претходно одредити параметре модела. У овом раду су коришћене CK-SAFT и PC-SAFT једначине
стања за одређивање густина чистих компонената у широком опсегу температура и притисака (288,15–413,15 K, односно 0,1–60 MPa). Прорачун густина n-хексана, n-хептана,
n-октана, толуена, дихлорметана и етанола је извршен на високим притисцима са сетовима параметара одређених у овом раду помоћу наведених CK-SAFT и PC-SAFT модела. 
Коришћењем добијених параметара постигнути су веома добри резултати са апсолутним средњим процентуалним грешкама мањим од 0,5 %.
PB  - Belgrade : Serbian Chemical Society
T2  - Journal of the Serbian Chemical Society
T1  - Modelling of pure components high pressures densities using CK-SAFT and PC-SAFT equations
T1  - Моделовање густина чистих компонената на високим притисцима применом ck-saft и pc-saft једначина стања
VL  - 83
IS  - 3
SP  - 331
EP  - 343
DO  - 10.2298/JSC170613096P
ER  - 

@article{
author = "Ilić-Pajić, Jovana and Stijepović, Mirko Z. and Ivaniš, Gorica and Radović, Ivona and Stajić-Trošić, Jasna and Kijevčanin, Mirjana",
year = "2018",
abstract = "SAFT equations of state have been widely used for the determination of different thermo-physical and phase equilibria properties. In order to use these equations as predictive models it is necessary to calculate the model parameters. In this work CK-SAFT and PC-SAFT equations of state were applied for the correlation of pure compounds densities in the wide ranges of temperature and pressure (288.15-413.15 K and 0.1-60 MPa, respectively). The calculations of densities for n-hexane, n-heptane, n-octane, toluene, dichloromethane and ethanol, under high pressure conditions, were performed with the new sets of parameters determined in this paper by CK-SAFT and PC-SAFT. Very good agreement between experimental and calculated density values was achieved, having absolute average percentage deviations lower than 0.5 %., SAFT једначине стања се веома често користе за одређивање различитих термофизичких својстава, као и у описивању различитих равнотежа фаза. Да би се ови модели могли користити у предвиђању термодинамичких величина неопходно је претходно одредити параметре модела. У овом раду су коришћене CK-SAFT и PC-SAFT једначине
стања за одређивање густина чистих компонената у широком опсегу температура и притисака (288,15–413,15 K, односно 0,1–60 MPa). Прорачун густина n-хексана, n-хептана,
n-октана, толуена, дихлорметана и етанола је извршен на високим притисцима са сетовима параметара одређених у овом раду помоћу наведених CK-SAFT и PC-SAFT модела. 
Коришћењем добијених параметара постигнути су веома добри резултати са апсолутним средњим процентуалним грешкама мањим од 0,5 %.",
publisher = "Belgrade : Serbian Chemical Society",
journal = "Journal of the Serbian Chemical Society",
title = "Modelling of pure components high pressures densities using CK-SAFT and PC-SAFT equations, Моделовање густина чистих компонената на високим притисцима применом ck-saft и pc-saft једначина стања",
volume = "83",
number = "3",
pages = "331-343",
doi = "10.2298/JSC170613096P"
}

Ilić-Pajić, J., Stijepović, M. Z., Ivaniš, G., Radović, I., Stajić-Trošić, J.,& Kijevčanin, M.. (2018). Modelling of pure components high pressures densities using CK-SAFT and PC-SAFT equations. in Journal of the Serbian Chemical Society
Belgrade : Serbian Chemical Society., 83(3), 331-343.
https://doi.org/10.2298/JSC170613096P

Ilić-Pajić J, Stijepović MZ, Ivaniš G, Radović I, Stajić-Trošić J, Kijevčanin M. Modelling of pure components high pressures densities using CK-SAFT and PC-SAFT equations. in Journal of the Serbian Chemical Society. 2018;83(3):331-343.
doi:10.2298/JSC170613096P .

Ilić-Pajić, Jovana, Stijepović, Mirko Z., Ivaniš, Gorica, Radović, Ivona, Stajić-Trošić, Jasna, Kijevčanin, Mirjana, "Modelling of pure components high pressures densities using CK-SAFT and PC-SAFT equations" in Journal of the Serbian Chemical Society, 83, no. 3 (2018):331-343,
https://doi.org/10.2298/JSC170613096P . .

TY  - JOUR
AU  - Grujić, Aleksandar
AU  - Ćosović, Vladan
AU  - Stajić-Trošić, Jasna
AU  - Ćosović, Aleksandar
AU  - Stijepović, Mirko
AU  - Putić, Lana
AU  - Žák, Tomáš
PY  - 2018
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/4747
AB  - In this study, electrospinning combined with sol-gel technique is applied in order to produce magnetic nickel ferrite (Ni-ferrite) nanofibers. The prepared Ni-ferrite gel was mixed with poly(vinylpyrrolidone) (PVP) solution which was used as a spinning aid to enable spinnability of the mixture. Structural and morphological characteristics of the asspun ferrite gel/PVP composite web structure and calcinated Ni-ferrite nanofibers were analyzed using scanning electron microscopy (SEM). Phase composition analysis was carried out by Fourier-transform infrared (FT-IR) spectroscopy, X-Ray diffraction analysis (XRD) and Fe-57 Mossbauer spectroscopy (MS). The obtained results suggest that the pure nanocrystalline NiFe2O4 dense mat to the almost coral-like structure of fibers with diameters ranging from hundreds of nanometers to few micrometers was obtained. The results of MS analysis revealed the existence of a crystallite size distribution within the material as well as the existence of a superparamagnetic fraction with very small crystallite sizes (<13nm). Magnetic behavior of the obtained material at elevated temperatures was also scrutinized using thermomagnetic measurements (TM) up to 800 degrees C.
PB  - Belgrade : Association of Metallurgical Engineers of Serbia
T2  - Metallurgical & Materials Engineering
T1  - Synthesis of NiFe2O4 nanofibers by joint sol-gel and electrospinning technique
VL  - 24
IS  - 3
SP  - 173
EP  - 180
DO  - 10.30544/387
ER  - 

@article{
author = "Grujić, Aleksandar and Ćosović, Vladan and Stajić-Trošić, Jasna and Ćosović, Aleksandar and Stijepović, Mirko and Putić, Lana and Žák, Tomáš",
year = "2018",
abstract = "In this study, electrospinning combined with sol-gel technique is applied in order to produce magnetic nickel ferrite (Ni-ferrite) nanofibers. The prepared Ni-ferrite gel was mixed with poly(vinylpyrrolidone) (PVP) solution which was used as a spinning aid to enable spinnability of the mixture. Structural and morphological characteristics of the asspun ferrite gel/PVP composite web structure and calcinated Ni-ferrite nanofibers were analyzed using scanning electron microscopy (SEM). Phase composition analysis was carried out by Fourier-transform infrared (FT-IR) spectroscopy, X-Ray diffraction analysis (XRD) and Fe-57 Mossbauer spectroscopy (MS). The obtained results suggest that the pure nanocrystalline NiFe2O4 dense mat to the almost coral-like structure of fibers with diameters ranging from hundreds of nanometers to few micrometers was obtained. The results of MS analysis revealed the existence of a crystallite size distribution within the material as well as the existence of a superparamagnetic fraction with very small crystallite sizes (<13nm). Magnetic behavior of the obtained material at elevated temperatures was also scrutinized using thermomagnetic measurements (TM) up to 800 degrees C.",
publisher = "Belgrade : Association of Metallurgical Engineers of Serbia",
journal = "Metallurgical & Materials Engineering",
title = "Synthesis of NiFe2O4 nanofibers by joint sol-gel and electrospinning technique",
volume = "24",
number = "3",
pages = "173-180",
doi = "10.30544/387"
}

Grujić, A., Ćosović, V., Stajić-Trošić, J., Ćosović, A., Stijepović, M., Putić, L.,& Žák, T.. (2018). Synthesis of NiFe2O4 nanofibers by joint sol-gel and electrospinning technique. in Metallurgical & Materials Engineering
Belgrade : Association of Metallurgical Engineers of Serbia., 24(3), 173-180.
https://doi.org/10.30544/387

Grujić A, Ćosović V, Stajić-Trošić J, Ćosović A, Stijepović M, Putić L, Žák T. Synthesis of NiFe2O4 nanofibers by joint sol-gel and electrospinning technique. in Metallurgical & Materials Engineering. 2018;24(3):173-180.
doi:10.30544/387 .

Grujić, Aleksandar, Ćosović, Vladan, Stajić-Trošić, Jasna, Ćosović, Aleksandar, Stijepović, Mirko, Putić, Lana, Žák, Tomáš, "Synthesis of NiFe2O4 nanofibers by joint sol-gel and electrospinning technique" in Metallurgical & Materials Engineering, 24, no. 3 (2018):173-180,
https://doi.org/10.30544/387 . .

TY  - JOUR
AU  - Grujić, Aleksandar
AU  - Stajić-Trošić, Jasna
AU  - Stijepović, Mirko Z.
AU  - Perišić, Srđan
AU  - Žák, Tomáš
PY  - 2017
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/2082
AB  - The Nd-Fe-B-barium ferrite hybrid composite materials with epoxy matrix presented in this paper cover maximum energy product from 1 to 13 MGOe. Mixture of magnetic particles is responsible for high magnetic quality, while the thermosetting resin plays a role in mechanical properties. Samples with various ratio of Nd-Fe-B to barium ferrite in constant weight of epoxy resin are examined by tensile strength measurements. Magnetic measurements carried out by using vibrating sample magnetometer (VSM) show typical hysteresis loop. A structural analysis of composite surface is conducted by scanning electron microscope (SEM). Uniform particle distribution of plate shape Nd-Fe-B particles and spherical barium ferrite agglomerates is essential for both, mechanical and magnetic properties of composite materials. Fine particles are incorporated in-between larger particles in epoxy bulk which lead to improving the properties.
AB  - U ovom radu proučavani su hibridni Nd-Fe-B-barijum ferit kompozitni materijali sa epoksi matricom čiji se maksimani energetski proizvod kreće od 1 do 13 MGOe. Odlična magnetna svojstva kompozita potiču od smeše magnetnih čestica, dok termoočvršćavajući polimer ima uticaj na mehanička svojstva. Uzorci sa različitim odnosom udela Nd-Fe-B i barijum ferita u konstantnoj masi epoksi veziva su ispitivani na zateznu čvrstoću. Magnetna merenja vršena pomoću vibracionog magnetometra (VSM) pokazuju karakteristučnu histerezisnu petlju. Strukturnu analizu na površini kompozita sprovedena pomoću skenirajuće elektronske mikroskopije (SEM). Uniformna raspodela pločastih Nd-Fe-B čestica i sferičnih aglomerata barijum ferita je veoma značajna i za mehanička i za magnetna svojstva kompozitnih materijala. Sitne čestice su inkorporirane između velikih čestica u masi epoksida što dovodi do poboljšanja svojstava.
PB  - Belgrade, Serbia : Engineering Society for Corrosion
T2  - Zaštita materijala
T1  - Tensile strength properties of hybrid magnetic composite materials
T1  - Zatezna čvrstoća hibridnih magnetnih kompozitnih materijala
VL  - 58
IS  - 4
SP  - 570
EP  - 575
DO  - 10.5937/ZasMat1704570G
ER  - 

@article{
author = "Grujić, Aleksandar and Stajić-Trošić, Jasna and Stijepović, Mirko Z. and Perišić, Srđan and Žák, Tomáš",
year = "2017",
abstract = "The Nd-Fe-B-barium ferrite hybrid composite materials with epoxy matrix presented in this paper cover maximum energy product from 1 to 13 MGOe. Mixture of magnetic particles is responsible for high magnetic quality, while the thermosetting resin plays a role in mechanical properties. Samples with various ratio of Nd-Fe-B to barium ferrite in constant weight of epoxy resin are examined by tensile strength measurements. Magnetic measurements carried out by using vibrating sample magnetometer (VSM) show typical hysteresis loop. A structural analysis of composite surface is conducted by scanning electron microscope (SEM). Uniform particle distribution of plate shape Nd-Fe-B particles and spherical barium ferrite agglomerates is essential for both, mechanical and magnetic properties of composite materials. Fine particles are incorporated in-between larger particles in epoxy bulk which lead to improving the properties., U ovom radu proučavani su hibridni Nd-Fe-B-barijum ferit kompozitni materijali sa epoksi matricom čiji se maksimani energetski proizvod kreće od 1 do 13 MGOe. Odlična magnetna svojstva kompozita potiču od smeše magnetnih čestica, dok termoočvršćavajući polimer ima uticaj na mehanička svojstva. Uzorci sa različitim odnosom udela Nd-Fe-B i barijum ferita u konstantnoj masi epoksi veziva su ispitivani na zateznu čvrstoću. Magnetna merenja vršena pomoću vibracionog magnetometra (VSM) pokazuju karakteristučnu histerezisnu petlju. Strukturnu analizu na površini kompozita sprovedena pomoću skenirajuće elektronske mikroskopije (SEM). Uniformna raspodela pločastih Nd-Fe-B čestica i sferičnih aglomerata barijum ferita je veoma značajna i za mehanička i za magnetna svojstva kompozitnih materijala. Sitne čestice su inkorporirane između velikih čestica u masi epoksida što dovodi do poboljšanja svojstava.",
publisher = "Belgrade, Serbia : Engineering Society for Corrosion",
journal = "Zaštita materijala",
title = "Tensile strength properties of hybrid magnetic composite materials, Zatezna čvrstoća hibridnih magnetnih kompozitnih materijala",
volume = "58",
number = "4",
pages = "570-575",
doi = "10.5937/ZasMat1704570G"
}

Grujić, A., Stajić-Trošić, J., Stijepović, M. Z., Perišić, S.,& Žák, T.. (2017). Tensile strength properties of hybrid magnetic composite materials. in Zaštita materijala
Belgrade, Serbia : Engineering Society for Corrosion., 58(4), 570-575.
https://doi.org/10.5937/ZasMat1704570G

Grujić A, Stajić-Trošić J, Stijepović MZ, Perišić S, Žák T. Tensile strength properties of hybrid magnetic composite materials. in Zaštita materijala. 2017;58(4):570-575.
doi:10.5937/ZasMat1704570G .

Grujić, Aleksandar, Stajić-Trošić, Jasna, Stijepović, Mirko Z., Perišić, Srđan, Žák, Tomáš, "Tensile strength properties of hybrid magnetic composite materials" in Zaštita materijala, 58, no. 4 (2017):570-575,
https://doi.org/10.5937/ZasMat1704570G . .

TY  - JOUR
AU  - Zarić, Milana
AU  - Stijepović, Mirko Z.
AU  - Linke, Patrick
AU  - Stajić-Trošić, Jasna
AU  - Bugarski, Branko
AU  - Kijevčanin, Mirjana
PY  - 2017
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/2235
AB  - In order to reduce the usage of fossil fuels in industrial sectors by meeting the requirements of production processes, new heat integration and heat recovery approaches are developed. The goal of this study is to develop an approach to increase energy efficiency of an industrial zone by recovering and reusing waste heat via indirect heat integration. Industrial zones usually consist of multiple independent plants, where each plant is supplied by an independent utility system, as a decentralized system. In this study, a new approach is developed to target minimum energy requirements where an industrial zone would be supplied by a centralized utility system instead of decentralized utility system. The approach assumes that all process plants in an industrial zone are linked through the central utility system. This method is formulated as a linear programming problem (LP). Moreover, the proposed method may be used for decision making related to energy integration strategy of an industrial zone. In addition, the proposed method was applied on a case study. The results revealed that saving of fossil fuel could be achieved.
PB  - Association of the Chemical Engineers of Serbia
T2  - Chemical Industry and Chemical Engineering Quarterly / CICEQ
T1  - Targeting heat recovery and reuse in industrial zone
VL  - 23
IS  - 1
SP  - 73
EP  - 82
DO  - 10.2298/CICEQ150622009Z
ER  - 

@article{
author = "Zarić, Milana and Stijepović, Mirko Z. and Linke, Patrick and Stajić-Trošić, Jasna and Bugarski, Branko and Kijevčanin, Mirjana",
year = "2017",
abstract = "In order to reduce the usage of fossil fuels in industrial sectors by meeting the requirements of production processes, new heat integration and heat recovery approaches are developed. The goal of this study is to develop an approach to increase energy efficiency of an industrial zone by recovering and reusing waste heat via indirect heat integration. Industrial zones usually consist of multiple independent plants, where each plant is supplied by an independent utility system, as a decentralized system. In this study, a new approach is developed to target minimum energy requirements where an industrial zone would be supplied by a centralized utility system instead of decentralized utility system. The approach assumes that all process plants in an industrial zone are linked through the central utility system. This method is formulated as a linear programming problem (LP). Moreover, the proposed method may be used for decision making related to energy integration strategy of an industrial zone. In addition, the proposed method was applied on a case study. The results revealed that saving of fossil fuel could be achieved.",
publisher = "Association of the Chemical Engineers of Serbia",
journal = "Chemical Industry and Chemical Engineering Quarterly / CICEQ",
title = "Targeting heat recovery and reuse in industrial zone",
volume = "23",
number = "1",
pages = "73-82",
doi = "10.2298/CICEQ150622009Z"
}

Zarić, M., Stijepović, M. Z., Linke, P., Stajić-Trošić, J., Bugarski, B.,& Kijevčanin, M.. (2017). Targeting heat recovery and reuse in industrial zone. in Chemical Industry and Chemical Engineering Quarterly / CICEQ
Association of the Chemical Engineers of Serbia., 23(1), 73-82.
https://doi.org/10.2298/CICEQ150622009Z

Zarić M, Stijepović MZ, Linke P, Stajić-Trošić J, Bugarski B, Kijevčanin M. Targeting heat recovery and reuse in industrial zone. in Chemical Industry and Chemical Engineering Quarterly / CICEQ. 2017;23(1):73-82.
doi:10.2298/CICEQ150622009Z .

Zarić, Milana, Stijepović, Mirko Z., Linke, Patrick, Stajić-Trošić, Jasna, Bugarski, Branko, Kijevčanin, Mirjana, "Targeting heat recovery and reuse in industrial zone" in Chemical Industry and Chemical Engineering Quarterly / CICEQ, 23, no. 1 (2017):73-82,
https://doi.org/10.2298/CICEQ150622009Z . .

TY  - JOUR
AU  - Brkic, Dominik
AU  - Nedeljković, Dragutin
AU  - Putić, Lana
AU  - Stajić-Trošić, Jasna
AU  - Stamenovic, Marina
PY  - 2016
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/2002
AB  - The natural balance in the Earth's atmosphere is significantly influenced by the human emission of the combustion products, mainly carbon dioxide. Therefore, strong efforts are directed in the direction of the reduction of that emission. The solution might be searched in the direction of the construction of the membrane that would be highly transparent to the carbon dioxide, but not transparent to the other gases commonly present in the waste gases (oxygen, nitrogen, hydrogen, methane). One of the feasible designs for this purpose is dense, non-porous membranes, with zeolite particles dispersed in the polymer matrix. Zeolite particles should increase the solubility of the carbon dioxide, and thus enhance its permeability. In this paper, the possibility of application of polyether-b-amide (with 60% of PEG) as a polymer matrix was tested. For the inorganic component, four different zeolite types with three different pore geometries were tested. The influence of the additive which was added in order to provide good contact between the highly polar and charged zeolite inorganic particle, and hydrophobic polymer chains was also tested.
PB  - Japan Inst Metals, Sendai
T2  - Materials Transactions
T1  - Gas Separation Properties of the Dense Polymer-Zeolite Powder Composite Membranes
VL  - 57
IS  - 3
SP  - 452
EP  - 456
DO  - 10.2320/matertrans.M2015387
ER  - 

@article{
author = "Brkic, Dominik and Nedeljković, Dragutin and Putić, Lana and Stajić-Trošić, Jasna and Stamenovic, Marina",
year = "2016",
abstract = "The natural balance in the Earth's atmosphere is significantly influenced by the human emission of the combustion products, mainly carbon dioxide. Therefore, strong efforts are directed in the direction of the reduction of that emission. The solution might be searched in the direction of the construction of the membrane that would be highly transparent to the carbon dioxide, but not transparent to the other gases commonly present in the waste gases (oxygen, nitrogen, hydrogen, methane). One of the feasible designs for this purpose is dense, non-porous membranes, with zeolite particles dispersed in the polymer matrix. Zeolite particles should increase the solubility of the carbon dioxide, and thus enhance its permeability. In this paper, the possibility of application of polyether-b-amide (with 60% of PEG) as a polymer matrix was tested. For the inorganic component, four different zeolite types with three different pore geometries were tested. The influence of the additive which was added in order to provide good contact between the highly polar and charged zeolite inorganic particle, and hydrophobic polymer chains was also tested.",
publisher = "Japan Inst Metals, Sendai",
journal = "Materials Transactions",
title = "Gas Separation Properties of the Dense Polymer-Zeolite Powder Composite Membranes",
volume = "57",
number = "3",
pages = "452-456",
doi = "10.2320/matertrans.M2015387"
}

Brkic, D., Nedeljković, D., Putić, L., Stajić-Trošić, J.,& Stamenovic, M.. (2016). Gas Separation Properties of the Dense Polymer-Zeolite Powder Composite Membranes. in Materials Transactions
Japan Inst Metals, Sendai., 57(3), 452-456.
https://doi.org/10.2320/matertrans.M2015387

Brkic D, Nedeljković D, Putić L, Stajić-Trošić J, Stamenovic M. Gas Separation Properties of the Dense Polymer-Zeolite Powder Composite Membranes. in Materials Transactions. 2016;57(3):452-456.
doi:10.2320/matertrans.M2015387 .

Brkic, Dominik, Nedeljković, Dragutin, Putić, Lana, Stajić-Trošić, Jasna, Stamenovic, Marina, "Gas Separation Properties of the Dense Polymer-Zeolite Powder Composite Membranes" in Materials Transactions, 57, no. 3 (2016):452-456,
https://doi.org/10.2320/matertrans.M2015387 . .

TY  - JOUR
AU  - Nedeljković, Dragutin
AU  - Stajčić, Aleksandar
AU  - Grujić, Aleksandar
AU  - Stijepović, Mirko Z.
AU  - Stajić-Trošić, Jasna
PY  - 2015
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/1637
AB  - The main task of the work is to construct the polymeric membrane that could be used for the waste gases treatment. For this purpose, membrane must have high permeability for the carbon dioxide and low permeability of the other gases commonly present in waste gases (hydrogen, oxygen, nitrogen and methane). The constructed membranes were of a dense type, based on a solubility/diffusivity mechanism. In order to enchase the permeability of carbon dioxide, four different zeolytes were added, and in order to improve mechanical stability two different additives were tested. Three zeolytes were with the 3-dimensional pores (ZSM5; Faujasite Linde type A) and one was with the 1-dimensional pores (Linde type L). As an additive, n-tetradecyldimethylamonium bromide - n-C14TMABr was tested. The aim of an additive was to provide good wetting of a highly electrically charged zeolyte particle by the hydrophobic polymer chains. The other examined additive was dimethylaminopyridine (DMAP) which should improve the solubility of carbon dioxide due to its alkali properties. The best results in carbon dioxide/hydrogen selectivity and permeability were obtained with the membrane constructed with PEBAX 1657 and surface treated zeolyte. The obtained permeability of carbon dioxide was 128 Barrer, and the carbon dioxide/hydrogen selectivity was 9.7.
AB  - Cilj istraživanja prikazanih u ovom radu je izrada polimerne membrane koja bi imala primenu u prečišćavanju otpadnih gasova. Membrana konstruisana za ovu primenu bi morala da ima visoku permeabilnost za ugljen-dioksid i nisku permeabilnost za druge gasove koji su standardno prisutni u otpadnim gasovima (vodonik, kiseonik, azot i metan). Dobijene membrane pripadaju tipu neporoznih membrana čija se permeabilnost bazira na mehanizmu rastvaranja i difuzije. U ovom radu, ispitivana je mogućnost primene poli(etilenoksida) - kopoli(ftalamida) za ovu svrhu. Da bi se povećala permeabilnost ugljen-dioksida, dodate su četiri različite vrste zeolitnih prahova, a u cilju poboljšanja mehaničkih svojstava, ispitivana su dva aditiva. Tri zeolitna praha korišćena u eksperimentu imaju trodimenzionalne pore (ZSM5, Faujasit i Linde zeolit tip A), a jedan prah je sa jednodimenzionalnim porama (Linde zeolit tip L). Kao aditiv je testiran n-tetradeciltrimetilamonijum bromid. Cilj dodavanja ovog aditiva je da omogući dobar kontakt između dugih, hidrofobnih polimernih lanaca i naelektrisanih čestica zeolita. Drugi ispitivani aditiv je dimetilaminopiridin, čija bi bazna svojstva trebalo da poboljšaju rastvorljovost ugljen dioksida. Najbolji rezultati su postignuti korišćenjem membrane konstruisane sa PEBAX 1657 polimerom i zeolitom u prisustvu aditiva.
PB  - Savez inženjera i tehničara Srbije
T2  - Tehnika
T1  - The application of the zeolyte powder for the construction of the dense composite membranes for the carbon-dioxide separation
T1  - Primena zeolitnih prahova za izradu kompozitnih polimernih membrana za separaciju ugljen-dioksida
VL  - 70
IS  - 2
SP  - 216
EP  - 222
DO  - 10.5937/tehnika1502216N
ER  - 

@article{
author = "Nedeljković, Dragutin and Stajčić, Aleksandar and Grujić, Aleksandar and Stijepović, Mirko Z. and Stajić-Trošić, Jasna",
year = "2015",
abstract = "The main task of the work is to construct the polymeric membrane that could be used for the waste gases treatment. For this purpose, membrane must have high permeability for the carbon dioxide and low permeability of the other gases commonly present in waste gases (hydrogen, oxygen, nitrogen and methane). The constructed membranes were of a dense type, based on a solubility/diffusivity mechanism. In order to enchase the permeability of carbon dioxide, four different zeolytes were added, and in order to improve mechanical stability two different additives were tested. Three zeolytes were with the 3-dimensional pores (ZSM5; Faujasite Linde type A) and one was with the 1-dimensional pores (Linde type L). As an additive, n-tetradecyldimethylamonium bromide - n-C14TMABr was tested. The aim of an additive was to provide good wetting of a highly electrically charged zeolyte particle by the hydrophobic polymer chains. The other examined additive was dimethylaminopyridine (DMAP) which should improve the solubility of carbon dioxide due to its alkali properties. The best results in carbon dioxide/hydrogen selectivity and permeability were obtained with the membrane constructed with PEBAX 1657 and surface treated zeolyte. The obtained permeability of carbon dioxide was 128 Barrer, and the carbon dioxide/hydrogen selectivity was 9.7., Cilj istraživanja prikazanih u ovom radu je izrada polimerne membrane koja bi imala primenu u prečišćavanju otpadnih gasova. Membrana konstruisana za ovu primenu bi morala da ima visoku permeabilnost za ugljen-dioksid i nisku permeabilnost za druge gasove koji su standardno prisutni u otpadnim gasovima (vodonik, kiseonik, azot i metan). Dobijene membrane pripadaju tipu neporoznih membrana čija se permeabilnost bazira na mehanizmu rastvaranja i difuzije. U ovom radu, ispitivana je mogućnost primene poli(etilenoksida) - kopoli(ftalamida) za ovu svrhu. Da bi se povećala permeabilnost ugljen-dioksida, dodate su četiri različite vrste zeolitnih prahova, a u cilju poboljšanja mehaničkih svojstava, ispitivana su dva aditiva. Tri zeolitna praha korišćena u eksperimentu imaju trodimenzionalne pore (ZSM5, Faujasit i Linde zeolit tip A), a jedan prah je sa jednodimenzionalnim porama (Linde zeolit tip L). Kao aditiv je testiran n-tetradeciltrimetilamonijum bromid. Cilj dodavanja ovog aditiva je da omogući dobar kontakt između dugih, hidrofobnih polimernih lanaca i naelektrisanih čestica zeolita. Drugi ispitivani aditiv je dimetilaminopiridin, čija bi bazna svojstva trebalo da poboljšaju rastvorljovost ugljen dioksida. Najbolji rezultati su postignuti korišćenjem membrane konstruisane sa PEBAX 1657 polimerom i zeolitom u prisustvu aditiva.",
publisher = "Savez inženjera i tehničara Srbije",
journal = "Tehnika",
title = "The application of the zeolyte powder for the construction of the dense composite membranes for the carbon-dioxide separation, Primena zeolitnih prahova za izradu kompozitnih polimernih membrana za separaciju ugljen-dioksida",
volume = "70",
number = "2",
pages = "216-222",
doi = "10.5937/tehnika1502216N"
}

Nedeljković, D., Stajčić, A., Grujić, A., Stijepović, M. Z.,& Stajić-Trošić, J.. (2015). The application of the zeolyte powder for the construction of the dense composite membranes for the carbon-dioxide separation. in Tehnika
Savez inženjera i tehničara Srbije., 70(2), 216-222.
https://doi.org/10.5937/tehnika1502216N

Nedeljković D, Stajčić A, Grujić A, Stijepović MZ, Stajić-Trošić J. The application of the zeolyte powder for the construction of the dense composite membranes for the carbon-dioxide separation. in Tehnika. 2015;70(2):216-222.
doi:10.5937/tehnika1502216N .

Nedeljković, Dragutin, Stajčić, Aleksandar, Grujić, Aleksandar, Stijepović, Mirko Z., Stajić-Trošić, Jasna, "The application of the zeolyte powder for the construction of the dense composite membranes for the carbon-dioxide separation" in Tehnika, 70, no. 2 (2015):216-222,
https://doi.org/10.5937/tehnika1502216N . .

TY  - JOUR
AU  - El, Swie H
AU  - Radojević, Vesna
AU  - Brajovic, L
AU  - Stajić-Trošić, Jasna
AU  - Ćosović, Vladan
AU  - Grujić, Aleksandar
AU  - Aleksić, Radoslav
PY  - 2015
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/1677
AB  - The commercial multi-mode optical fiber was coated with magnetic composite material prepared using Nd-Fe-B permanent magnet powder dispersed in poly (ethylene-co-vinyl acetate)-EVA. Characterization of microstructure, thermal stability and mechanical properties of the composite coatings with different Nd-Fe-B powder content were performed using Scanning Electron Microscope (SEM), Differential Scanning Calorimetry (DSC), and standard tensile tester, respectively. Experimental results show that composites with higher content of Nd-Fe-B powder have improved thermal and mechanical properties. Propagation characteristics of the constructed optical fiber magnetic sensing element (OFMSE) in the external magnetic field were investigated in relation to quality and composition of the applied composite coatings. The attenuation of optical signal with applied external magnetic field intensity was monitored and the results suggest that the sample with 50 wt-% of Nd-Fe-B provides the greatest sensitivity of the sensor element.
PB  - Inst Materials Physics
T2  - Digest Journal of Nanomaterials and Biostructures
T1  - Synthesis and performance of polymer based magnetic composite sensing element
VL  - 10
IS  - 4
SP  - 1475
EP  - 1483
UR  - https://hdl.handle.net/21.15107/rcub_cer_1677
ER  - 

@article{
author = "El, Swie H and Radojević, Vesna and Brajovic, L and Stajić-Trošić, Jasna and Ćosović, Vladan and Grujić, Aleksandar and Aleksić, Radoslav",
year = "2015",
abstract = "The commercial multi-mode optical fiber was coated with magnetic composite material prepared using Nd-Fe-B permanent magnet powder dispersed in poly (ethylene-co-vinyl acetate)-EVA. Characterization of microstructure, thermal stability and mechanical properties of the composite coatings with different Nd-Fe-B powder content were performed using Scanning Electron Microscope (SEM), Differential Scanning Calorimetry (DSC), and standard tensile tester, respectively. Experimental results show that composites with higher content of Nd-Fe-B powder have improved thermal and mechanical properties. Propagation characteristics of the constructed optical fiber magnetic sensing element (OFMSE) in the external magnetic field were investigated in relation to quality and composition of the applied composite coatings. The attenuation of optical signal with applied external magnetic field intensity was monitored and the results suggest that the sample with 50 wt-% of Nd-Fe-B provides the greatest sensitivity of the sensor element.",
publisher = "Inst Materials Physics",
journal = "Digest Journal of Nanomaterials and Biostructures",
title = "Synthesis and performance of polymer based magnetic composite sensing element",
volume = "10",
number = "4",
pages = "1475-1483",
url = "https://hdl.handle.net/21.15107/rcub_cer_1677"
}

El, S. H., Radojević, V., Brajovic, L., Stajić-Trošić, J., Ćosović, V., Grujić, A.,& Aleksić, R.. (2015). Synthesis and performance of polymer based magnetic composite sensing element. in Digest Journal of Nanomaterials and Biostructures
Inst Materials Physics., 10(4), 1475-1483.
https://hdl.handle.net/21.15107/rcub_cer_1677

El SH, Radojević V, Brajovic L, Stajić-Trošić J, Ćosović V, Grujić A, Aleksić R. Synthesis and performance of polymer based magnetic composite sensing element. in Digest Journal of Nanomaterials and Biostructures. 2015;10(4):1475-1483.
https://hdl.handle.net/21.15107/rcub_cer_1677 .

El, Swie H, Radojević, Vesna, Brajovic, L, Stajić-Trošić, Jasna, Ćosović, Vladan, Grujić, Aleksandar, Aleksić, Radoslav, "Synthesis and performance of polymer based magnetic composite sensing element" in Digest Journal of Nanomaterials and Biostructures, 10, no. 4 (2015):1475-1483,
https://hdl.handle.net/21.15107/rcub_cer_1677 .

TY  - JOUR
AU  - Pavlović, Miroslav M.
AU  - Ćosović, Vladan
AU  - Stajić-Trošić, Jasna
AU  - Janković, Zoran
AU  - Nikolić, Nebojša D.
AU  - Pavlović, Miomir
PY  - 2015
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/1686
AB  - In this manuscript the results of experimental studies of the properties of composite materials based on lignocellulosic matrix (LC) filled with electrolytic copper powder and chemically obtained silver powder are presented. Volume fractions of metal fillers in the composite materials in tested samples were varied in the range of 1.6-30% (v/v), and the samples were prepared by compression - cold pressing. Characterization included examination of the influence of particle size and morphology on the conductivity and percolation threshold of the composites using variety of testing techniques: SEM, TGA, DSC, particle size distribution and conductivity measurements. Thermal analysis of the prepared composites showed the improvement of the thermal characteristics of the composites. This was due to the presence of the metallic fillers which are very good thermal conductors, hence accumulating the emitted heat during TGA measurements primary to lignocellulosic matrix. On the other hand, there is no difference in the response with different metallic fillers and particles with different morphologies. Glass transition temperature is improved by 20ºC for all the composites.
AB  - U ovom radu su prikazani eksperimentalni rezultati istraživanja termijskih svojstava kompozitnih materijala na bazi lignocelulozne matrice (LC) punjenih elektrolitičkim bakarnim prahom i hemijski dobijenim srebrnim prahom. Udeo metalnih punilaca u kompozitnim materijalima u ispitnim uzorcima variran je u opsegu od 1.6-30% (v/v), a uzorci su pripremljeni hladnim presovanjem - kompaktiranjem pri različitim pritiscima. Karakterizacija i ispitivanje uticaja veličine i morfologije čestica na termijske karakteristike dobijenih kompozita. je uključivala različite tehnike ispitivanja: SEM, TGA, DSC, raspodelu veličina čestica i merenja provodnosti. Rezultati termijske analize pripremljenih kompozita pokazuju poboljšanje termalnih karakteristika samih kompozita usled prisustva metalnih punilaca koji su izrazito dobari termički provodnici, tako da se emitovana količina toplote tokom TGA merenja prvobitno akumulira u česticama punioca, pa tek potom dolazi do promene u samoj lignocelulozi. Sa druge strane, nema razlike u odgovoru kompozita sa različitim veličinama i vrstama čestica. Temperatura prelaska u staklasto stanje lignoceluloze kod svih pripremljenih kompozita je povećana za oko 20ºC.
PB  - Belgrade, Serbia : Engineering Society for Corrosion
T2  - Zaštita materijala
T1  - The effect of filler morphology on thermal characteristics of lignocellulose and metal powders composites
T1  - Uticaj morfologije punioca na termijske karakteristike kompozita lignoceluloze punjene metalnim prahovima
VL  - 56
IS  - 4
SP  - 471
EP  - 482
DO  - 10.5937/ZasMat1504471P
ER  - 

@article{
author = "Pavlović, Miroslav M. and Ćosović, Vladan and Stajić-Trošić, Jasna and Janković, Zoran and Nikolić, Nebojša D. and Pavlović, Miomir",
year = "2015",
abstract = "In this manuscript the results of experimental studies of the properties of composite materials based on lignocellulosic matrix (LC) filled with electrolytic copper powder and chemically obtained silver powder are presented. Volume fractions of metal fillers in the composite materials in tested samples were varied in the range of 1.6-30% (v/v), and the samples were prepared by compression - cold pressing. Characterization included examination of the influence of particle size and morphology on the conductivity and percolation threshold of the composites using variety of testing techniques: SEM, TGA, DSC, particle size distribution and conductivity measurements. Thermal analysis of the prepared composites showed the improvement of the thermal characteristics of the composites. This was due to the presence of the metallic fillers which are very good thermal conductors, hence accumulating the emitted heat during TGA measurements primary to lignocellulosic matrix. On the other hand, there is no difference in the response with different metallic fillers and particles with different morphologies. Glass transition temperature is improved by 20ºC for all the composites., U ovom radu su prikazani eksperimentalni rezultati istraživanja termijskih svojstava kompozitnih materijala na bazi lignocelulozne matrice (LC) punjenih elektrolitičkim bakarnim prahom i hemijski dobijenim srebrnim prahom. Udeo metalnih punilaca u kompozitnim materijalima u ispitnim uzorcima variran je u opsegu od 1.6-30% (v/v), a uzorci su pripremljeni hladnim presovanjem - kompaktiranjem pri različitim pritiscima. Karakterizacija i ispitivanje uticaja veličine i morfologije čestica na termijske karakteristike dobijenih kompozita. je uključivala različite tehnike ispitivanja: SEM, TGA, DSC, raspodelu veličina čestica i merenja provodnosti. Rezultati termijske analize pripremljenih kompozita pokazuju poboljšanje termalnih karakteristika samih kompozita usled prisustva metalnih punilaca koji su izrazito dobari termički provodnici, tako da se emitovana količina toplote tokom TGA merenja prvobitno akumulira u česticama punioca, pa tek potom dolazi do promene u samoj lignocelulozi. Sa druge strane, nema razlike u odgovoru kompozita sa različitim veličinama i vrstama čestica. Temperatura prelaska u staklasto stanje lignoceluloze kod svih pripremljenih kompozita je povećana za oko 20ºC.",
publisher = "Belgrade, Serbia : Engineering Society for Corrosion",
journal = "Zaštita materijala",
title = "The effect of filler morphology on thermal characteristics of lignocellulose and metal powders composites, Uticaj morfologije punioca na termijske karakteristike kompozita lignoceluloze punjene metalnim prahovima",
volume = "56",
number = "4",
pages = "471-482",
doi = "10.5937/ZasMat1504471P"
}

Pavlović, M. M., Ćosović, V., Stajić-Trošić, J., Janković, Z., Nikolić, N. D.,& Pavlović, M.. (2015). The effect of filler morphology on thermal characteristics of lignocellulose and metal powders composites. in Zaštita materijala
Belgrade, Serbia : Engineering Society for Corrosion., 56(4), 471-482.
https://doi.org/10.5937/ZasMat1504471P

Pavlović MM, Ćosović V, Stajić-Trošić J, Janković Z, Nikolić ND, Pavlović M. The effect of filler morphology on thermal characteristics of lignocellulose and metal powders composites. in Zaštita materijala. 2015;56(4):471-482.
doi:10.5937/ZasMat1504471P .

Pavlović, Miroslav M., Ćosović, Vladan, Stajić-Trošić, Jasna, Janković, Zoran, Nikolić, Nebojša D., Pavlović, Miomir, "The effect of filler morphology on thermal characteristics of lignocellulose and metal powders composites" in Zaštita materijala, 56, no. 4 (2015):471-482,
https://doi.org/10.5937/ZasMat1504471P . .

TY  - JOUR
AU  - Ilić-Pajić, Jovana
AU  - Grujić, Aleksandar
AU  - Stijepović, Mirko Z.
AU  - Stajić-Trošić, Jasna
AU  - Bugarski, Branko
PY  - 2015
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/1695
AB  - The aim of this paper is to obtain microbeads of natural polymers such as alginate and chitosan. These microbeads were used as potential carriers for the active ingredients so that in this study the diffusion of various substances from them is analyzed. Alginate microbeads were obtained by electrostatic droplet method. In the resulting microbeads was performed absorption of three tracer indicators with different molecular weight (acridine orange, blue dextran, methylene blue). The goal of the experiment is to monitor indicators release kinetics from microbeads. Based on these measurements the layoffs curve should give an answer on the impact of the molecular size of the three indicators on the diffusion rate of microbeads. In order to achieve the slow release of indicators alginate microbeads were coated with chitosan. Chitosan has an impact on reducing the porosity of gel, which further led to lower release tracer indicators of microbeads. Comparative analysis of the obtained layoffs curves answers about the impact on the process of obtaining micro diffusion rate indicator.
AB  - U ovom radu je prikazan proces sinteze mikročestica od prirodnih polimera, alginata i hitozana, kao i neka njihova svojstva. Osnovna primena ovih mikročestica je da se koriste kao potencijalni nosači za aktivne supstance. U tom smislu je ispitivana i difuzija različitih supstanci iz njih. Na alginatne mikročestice dobijene metodom elektrostatičke ekstruzije vršena je apsorpcija tri trejserska indikatora sa različitim molekulskim masama: akridin oranž, plavi dekstran i metilensko plavo. Praćenjem kinetike otpuštanja indikatora iz mikročestica konstruisane su krive otpuštanja koje daju informaciju o uticaju veličine molekula svakog od indikatora na brzinu difuzije iz mikročestica. Da bi se postiglo što sporije otpuštanje indikatora alginatne mikročestice su oblagane hitozanom. Hitozan ima uticaj na smanjenje poroznosti gela, što dovodi do sporijeg otpuštanja trejsersikh indikatora iz mikročestica. Uporedna analiza dobijenih krivih otpuštanja daje odgovor o uticaju postupka dobijanja mikročestica na brzinu difuzije indikatora.
PB  - Savez inženjera i tehničara Srbije
T2  - Tehnika
T1  - Effect of tracers molecular weight on the release process from alginate microbeads
T1  - Uticaj molekulske mase trejserskih indikatora na kontrolisano otpuštanje iz alginatnih mikročestica
VL  - 70
IS  - 3
SP  - 401
EP  - 405
DO  - 10.5937/tehnika1503401I
ER  - 

@article{
author = "Ilić-Pajić, Jovana and Grujić, Aleksandar and Stijepović, Mirko Z. and Stajić-Trošić, Jasna and Bugarski, Branko",
year = "2015",
abstract = "The aim of this paper is to obtain microbeads of natural polymers such as alginate and chitosan. These microbeads were used as potential carriers for the active ingredients so that in this study the diffusion of various substances from them is analyzed. Alginate microbeads were obtained by electrostatic droplet method. In the resulting microbeads was performed absorption of three tracer indicators with different molecular weight (acridine orange, blue dextran, methylene blue). The goal of the experiment is to monitor indicators release kinetics from microbeads. Based on these measurements the layoffs curve should give an answer on the impact of the molecular size of the three indicators on the diffusion rate of microbeads. In order to achieve the slow release of indicators alginate microbeads were coated with chitosan. Chitosan has an impact on reducing the porosity of gel, which further led to lower release tracer indicators of microbeads. Comparative analysis of the obtained layoffs curves answers about the impact on the process of obtaining micro diffusion rate indicator., U ovom radu je prikazan proces sinteze mikročestica od prirodnih polimera, alginata i hitozana, kao i neka njihova svojstva. Osnovna primena ovih mikročestica je da se koriste kao potencijalni nosači za aktivne supstance. U tom smislu je ispitivana i difuzija različitih supstanci iz njih. Na alginatne mikročestice dobijene metodom elektrostatičke ekstruzije vršena je apsorpcija tri trejserska indikatora sa različitim molekulskim masama: akridin oranž, plavi dekstran i metilensko plavo. Praćenjem kinetike otpuštanja indikatora iz mikročestica konstruisane su krive otpuštanja koje daju informaciju o uticaju veličine molekula svakog od indikatora na brzinu difuzije iz mikročestica. Da bi se postiglo što sporije otpuštanje indikatora alginatne mikročestice su oblagane hitozanom. Hitozan ima uticaj na smanjenje poroznosti gela, što dovodi do sporijeg otpuštanja trejsersikh indikatora iz mikročestica. Uporedna analiza dobijenih krivih otpuštanja daje odgovor o uticaju postupka dobijanja mikročestica na brzinu difuzije indikatora.",
publisher = "Savez inženjera i tehničara Srbije",
journal = "Tehnika",
title = "Effect of tracers molecular weight on the release process from alginate microbeads, Uticaj molekulske mase trejserskih indikatora na kontrolisano otpuštanje iz alginatnih mikročestica",
volume = "70",
number = "3",
pages = "401-405",
doi = "10.5937/tehnika1503401I"
}

Ilić-Pajić, J., Grujić, A., Stijepović, M. Z., Stajić-Trošić, J.,& Bugarski, B.. (2015). Effect of tracers molecular weight on the release process from alginate microbeads. in Tehnika
Savez inženjera i tehničara Srbije., 70(3), 401-405.
https://doi.org/10.5937/tehnika1503401I

Ilić-Pajić J, Grujić A, Stijepović MZ, Stajić-Trošić J, Bugarski B. Effect of tracers molecular weight on the release process from alginate microbeads. in Tehnika. 2015;70(3):401-405.
doi:10.5937/tehnika1503401I .

Ilić-Pajić, Jovana, Grujić, Aleksandar, Stijepović, Mirko Z., Stajić-Trošić, Jasna, Bugarski, Branko, "Effect of tracers molecular weight on the release process from alginate microbeads" in Tehnika, 70, no. 3 (2015):401-405,
https://doi.org/10.5937/tehnika1503401I . .

TY  - JOUR
AU  - Nedeljković, Dragutin
AU  - Stevanović, Marija P.
AU  - Stijepović, Mirko Z.
AU  - Stajčić, Aleksandar
AU  - Grujić, Aleksandar
AU  - Stajić-Trošić, Jasna
AU  - Stevanović, Jasmina
PY  - 2015
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/1733
AB  - The aim of this study was to construct a polymer-based mixed matrix membrane that could be used for waste gases treatment. Therefore, high permeability for the carbon dioxide and low permeability for other gases commonly present in the industrial combustion waste gases (nitrogen, oxygen, hydrogen and methane) are essential. These membranes belong to the group of dense composite membranes, whose separation is based on the solution diffusion mechanism. In this paper, feasibility of the application of poly(ethylene oxide)-copoly(phtalamide) was tested. In order to enhance the permeability of carbon dioxide, three different zeolites with two-dimensional pores (IHW, NSI and TER) were incorporated, and in order to improve compatibility between the inorganic particles and polymer chains, n-tetradecyldimethylamonium bromide (NTAB) was added. The best results in carbon dioxide/hydrogen selectivity were obtained with the membrane constructed with PEBAX 1657 and surface treated zeolites, while better results concerning selectivity were gained with membranes based on Polyactive.
AB  - Cilj ovog rada je bio da se konstruiše neporozna kompozitna membrana bazirana na polimernom matriksu koja može da bude upotrebljena za tretman otpadnih gasova. Za ovu svrhu, neophodno je da membrana ima visoku permeabilnost za ugljen-dioksid i nisku permeabilnost za druge gasove koji ne najčešće sreću u produktima sagorevanja (azot, kiseonik, vodonik, metan). Ove membrane pripadaju grupi neporoznih membrana i mehanizam separacije gasova je baziran na rastvorljivosti i difuziji. U ovom radu, testirana je mogućnost primene poli(etilenoksida)-kopoli(ftalamida). Da bi se povećala permeabilnost ugljen-dioksida, dodavana su tri različita zeolitna praha, a da bi se poboljšala kompatibilnost neorganskih čestica i polimernih lanaca, dodat je n-tetradeciltrimetilamonijum-bromid (NTAB). Ispitivani zeoliti pripadaju grupi sa dvodimenzionalnim porama (IHW, NSI i TER). Najbolji rezultati u separaciji ugljen-dioksida i vodonika su postignuti kod membrana baziranim na polimeru PEBAX 1657 i zeolitima uz dodatak aditiva. Sa druge strane, bolja selektivnost je postignuta kod membrana baziranih na Polyactive polimeru.
PB  - Association of the Chemical Engineers of Serbia
T2  - Chemical Industry and Chemical Engineering Quarterly / CICEQ
T1  - The possibility of application of zeolyte powders for the construction of membranes for carbon dioxide separation
T1  - Mogućnost primene zeolitnih prahova za konstrukciju membrana za izdvajanje ugljen-dioksida
VL  - 21
IS  - 2
SP  - 277
EP  - 284
DO  - 10.2298/CICEQ130924025N
ER  - 

@article{
author = "Nedeljković, Dragutin and Stevanović, Marija P. and Stijepović, Mirko Z. and Stajčić, Aleksandar and Grujić, Aleksandar and Stajić-Trošić, Jasna and Stevanović, Jasmina",
year = "2015",
abstract = "The aim of this study was to construct a polymer-based mixed matrix membrane that could be used for waste gases treatment. Therefore, high permeability for the carbon dioxide and low permeability for other gases commonly present in the industrial combustion waste gases (nitrogen, oxygen, hydrogen and methane) are essential. These membranes belong to the group of dense composite membranes, whose separation is based on the solution diffusion mechanism. In this paper, feasibility of the application of poly(ethylene oxide)-copoly(phtalamide) was tested. In order to enhance the permeability of carbon dioxide, three different zeolites with two-dimensional pores (IHW, NSI and TER) were incorporated, and in order to improve compatibility between the inorganic particles and polymer chains, n-tetradecyldimethylamonium bromide (NTAB) was added. The best results in carbon dioxide/hydrogen selectivity were obtained with the membrane constructed with PEBAX 1657 and surface treated zeolites, while better results concerning selectivity were gained with membranes based on Polyactive., Cilj ovog rada je bio da se konstruiše neporozna kompozitna membrana bazirana na polimernom matriksu koja može da bude upotrebljena za tretman otpadnih gasova. Za ovu svrhu, neophodno je da membrana ima visoku permeabilnost za ugljen-dioksid i nisku permeabilnost za druge gasove koji ne najčešće sreću u produktima sagorevanja (azot, kiseonik, vodonik, metan). Ove membrane pripadaju grupi neporoznih membrana i mehanizam separacije gasova je baziran na rastvorljivosti i difuziji. U ovom radu, testirana je mogućnost primene poli(etilenoksida)-kopoli(ftalamida). Da bi se povećala permeabilnost ugljen-dioksida, dodavana su tri različita zeolitna praha, a da bi se poboljšala kompatibilnost neorganskih čestica i polimernih lanaca, dodat je n-tetradeciltrimetilamonijum-bromid (NTAB). Ispitivani zeoliti pripadaju grupi sa dvodimenzionalnim porama (IHW, NSI i TER). Najbolji rezultati u separaciji ugljen-dioksida i vodonika su postignuti kod membrana baziranim na polimeru PEBAX 1657 i zeolitima uz dodatak aditiva. Sa druge strane, bolja selektivnost je postignuta kod membrana baziranih na Polyactive polimeru.",
publisher = "Association of the Chemical Engineers of Serbia",
journal = "Chemical Industry and Chemical Engineering Quarterly / CICEQ",
title = "The possibility of application of zeolyte powders for the construction of membranes for carbon dioxide separation, Mogućnost primene zeolitnih prahova za konstrukciju membrana za izdvajanje ugljen-dioksida",
volume = "21",
number = "2",
pages = "277-284",
doi = "10.2298/CICEQ130924025N"
}

Nedeljković, D., Stevanović, M. P., Stijepović, M. Z., Stajčić, A., Grujić, A., Stajić-Trošić, J.,& Stevanović, J.. (2015). The possibility of application of zeolyte powders for the construction of membranes for carbon dioxide separation. in Chemical Industry and Chemical Engineering Quarterly / CICEQ
Association of the Chemical Engineers of Serbia., 21(2), 277-284.
https://doi.org/10.2298/CICEQ130924025N

Nedeljković D, Stevanović MP, Stijepović MZ, Stajčić A, Grujić A, Stajić-Trošić J, Stevanović J. The possibility of application of zeolyte powders for the construction of membranes for carbon dioxide separation. in Chemical Industry and Chemical Engineering Quarterly / CICEQ. 2015;21(2):277-284.
doi:10.2298/CICEQ130924025N .

Nedeljković, Dragutin, Stevanović, Marija P., Stijepović, Mirko Z., Stajčić, Aleksandar, Grujić, Aleksandar, Stajić-Trošić, Jasna, Stevanović, Jasmina, "The possibility of application of zeolyte powders for the construction of membranes for carbon dioxide separation" in Chemical Industry and Chemical Engineering Quarterly / CICEQ, 21, no. 2 (2015):277-284,
https://doi.org/10.2298/CICEQ130924025N . .

TY  - JOUR
AU  - Stajčić, Aleksandar
AU  - Nastasović, Aleksandra
AU  - Stajić-Trošić, Jasna
AU  - Markovic, Jelena
AU  - Onjia, Antonije E.
AU  - Radovanović, Filip
PY  - 2015
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/1753
AB  - Polyethersulfone membranes with integrated negatively-charged hydrogel of crosslinked poly (acrylamido-2-methylpropane sulfonic acid) were prepared by a combination of a liquid phase inversion process with photopolymerization and crosslinking of functional monomers included in the casting solution. A designed experiment was conducted to select the optimal composition for preparing membranes with a sufficient degree of swelling and ion exchange capacity. Scanning electron microscopy images revealed an ultrafine hybrid structure with an interconnected network of submicron particles embedded within the microporous polyethersulfone support. An intramembrane diffusion model was used to describe kinetics of heavy metal sorption by these hydrogels and the calculated apparent diffusion coefficients were 2-3 times larger than in commercial ion-exchange resins. Equilibrium sorption of heavy metals was described using a semi-empirical Langmuir model.
PB  - Elsevier
T2  - Journal of Environmental Chemical Engineering
T1  - Novel membrane-supported hydrogel for removal of heavy metals
VL  - 3
IS  - 1
SP  - 453
EP  - 461
DO  - 10.1016/j.jece.2015.01.005
ER  - 

@article{
author = "Stajčić, Aleksandar and Nastasović, Aleksandra and Stajić-Trošić, Jasna and Markovic, Jelena and Onjia, Antonije E. and Radovanović, Filip",
year = "2015",
abstract = "Polyethersulfone membranes with integrated negatively-charged hydrogel of crosslinked poly (acrylamido-2-methylpropane sulfonic acid) were prepared by a combination of a liquid phase inversion process with photopolymerization and crosslinking of functional monomers included in the casting solution. A designed experiment was conducted to select the optimal composition for preparing membranes with a sufficient degree of swelling and ion exchange capacity. Scanning electron microscopy images revealed an ultrafine hybrid structure with an interconnected network of submicron particles embedded within the microporous polyethersulfone support. An intramembrane diffusion model was used to describe kinetics of heavy metal sorption by these hydrogels and the calculated apparent diffusion coefficients were 2-3 times larger than in commercial ion-exchange resins. Equilibrium sorption of heavy metals was described using a semi-empirical Langmuir model.",
publisher = "Elsevier",
journal = "Journal of Environmental Chemical Engineering",
title = "Novel membrane-supported hydrogel for removal of heavy metals",
volume = "3",
number = "1",
pages = "453-461",
doi = "10.1016/j.jece.2015.01.005"
}

Stajčić, A., Nastasović, A., Stajić-Trošić, J., Markovic, J., Onjia, A. E.,& Radovanović, F.. (2015). Novel membrane-supported hydrogel for removal of heavy metals. in Journal of Environmental Chemical Engineering
Elsevier., 3(1), 453-461.
https://doi.org/10.1016/j.jece.2015.01.005

Stajčić A, Nastasović A, Stajić-Trošić J, Markovic J, Onjia AE, Radovanović F. Novel membrane-supported hydrogel for removal of heavy metals. in Journal of Environmental Chemical Engineering. 2015;3(1):453-461.
doi:10.1016/j.jece.2015.01.005 .

Stajčić, Aleksandar, Nastasović, Aleksandra, Stajić-Trošić, Jasna, Markovic, Jelena, Onjia, Antonije E., Radovanović, Filip, "Novel membrane-supported hydrogel for removal of heavy metals" in Journal of Environmental Chemical Engineering, 3, no. 1 (2015):453-461,
https://doi.org/10.1016/j.jece.2015.01.005 . .

TY  - JOUR
AU  - Grujić, Aleksandar
AU  - Stijepović, Mirko
AU  - Stajić-Trošić, Jasna
AU  - Ilić, J.
AU  - Nedeljković, Dragutin
PY  - 2015
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/3961
AB  - In this study, design of lab scale device for determination of separation properties of membranes is presented and analyzed. Device operates with different gas pressure between chambers, whereby gas streams perpendicular to the membrane. Using appropriate acquisition system and applying mathematical formulas, mechanism for gas transfer through the membrane is determinate. Polymer membranes based on zeolite are synthesized and tested by lab scale device. The membranes with various content of zeolite are tested with CO2 gas until optimal composition of membrane components is established. Beside good mechanical and structural properties of applied membrane, suitable values of permeability with good agreement with the literature data are obtained.
AB  - U ovom radu je prikazano i analizirano konstrukcijsko rešenje laboratorijskog uređaja za određivanje separacionih svojstava membrana. Rad uređaja je baziran na razlici pritisaka između komora, pri čemu gas struji normalno na poprečni presek membrana. Odgovarajućim sistemom za akviziciju podataka i primenom odgovarajućih matematičkih formula određen je mehanizam prenosa kroz membranu. Polimerne membrane na bazi zeolita su sintetizovane i testirane na uređaju. Membrane sa različitim udelim zeolita su testirane na CO2 gas, dok nije ustanovljen optimalan sastav komponenti za sintezu membrana.Pored dobrih mehaničkih i strukturnih svojstava testirane membrane, dobijene su zadovoljavajuće vrednosti permeabilnosti koje su u saglasnosti sa drugim autorima.
PB  - Bosnia and Herzegovina : University of East Sarajevo, Faculty of Technology
T2  - Journal of Engineering & Processing Management
T1  - A method for determination of separation properties of membranes
T1  - Metod za određivanje separacionih svojstava membrana
VL  - 7
IS  - 1
SP  - 45
EP  - 54
DO  - 10.7251/JEPMEN1507045G
ER  - 

@article{
author = "Grujić, Aleksandar and Stijepović, Mirko and Stajić-Trošić, Jasna and Ilić, J. and Nedeljković, Dragutin",
year = "2015",
abstract = "In this study, design of lab scale device for determination of separation properties of membranes is presented and analyzed. Device operates with different gas pressure between chambers, whereby gas streams perpendicular to the membrane. Using appropriate acquisition system and applying mathematical formulas, mechanism for gas transfer through the membrane is determinate. Polymer membranes based on zeolite are synthesized and tested by lab scale device. The membranes with various content of zeolite are tested with CO2 gas until optimal composition of membrane components is established. Beside good mechanical and structural properties of applied membrane, suitable values of permeability with good agreement with the literature data are obtained., U ovom radu je prikazano i analizirano konstrukcijsko rešenje laboratorijskog uređaja za određivanje separacionih svojstava membrana. Rad uređaja je baziran na razlici pritisaka između komora, pri čemu gas struji normalno na poprečni presek membrana. Odgovarajućim sistemom za akviziciju podataka i primenom odgovarajućih matematičkih formula određen je mehanizam prenosa kroz membranu. Polimerne membrane na bazi zeolita su sintetizovane i testirane na uređaju. Membrane sa različitim udelim zeolita su testirane na CO2 gas, dok nije ustanovljen optimalan sastav komponenti za sintezu membrana.Pored dobrih mehaničkih i strukturnih svojstava testirane membrane, dobijene su zadovoljavajuće vrednosti permeabilnosti koje su u saglasnosti sa drugim autorima.",
publisher = "Bosnia and Herzegovina : University of East Sarajevo, Faculty of Technology",
journal = "Journal of Engineering & Processing Management",
title = "A method for determination of separation properties of membranes, Metod za određivanje separacionih svojstava membrana",
volume = "7",
number = "1",
pages = "45-54",
doi = "10.7251/JEPMEN1507045G"
}

Grujić, A., Stijepović, M., Stajić-Trošić, J., Ilić, J.,& Nedeljković, D.. (2015). A method for determination of separation properties of membranes. in Journal of Engineering & Processing Management
Bosnia and Herzegovina : University of East Sarajevo, Faculty of Technology., 7(1), 45-54.
https://doi.org/10.7251/JEPMEN1507045G

Grujić A, Stijepović M, Stajić-Trošić J, Ilić J, Nedeljković D. A method for determination of separation properties of membranes. in Journal of Engineering & Processing Management. 2015;7(1):45-54.
doi:10.7251/JEPMEN1507045G .

Grujić, Aleksandar, Stijepović, Mirko, Stajić-Trošić, Jasna, Ilić, J., Nedeljković, Dragutin, "A method for determination of separation properties of membranes" in Journal of Engineering & Processing Management, 7, no. 1 (2015):45-54,
https://doi.org/10.7251/JEPMEN1507045G . .

TY  - JOUR
AU  - Pavlović, Miroslav
AU  - Pavlović, Miomir
AU  - Aleksić, Radoslav
AU  - Nikolić, Nebojša D.
AU  - Stajić-Trošić, Jasna
AU  - Tomić, Milorad
PY  - 2014
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/6672
AB  - Ispitivana je električna provodljivost sistema baziranog na lignoceluloznom (LC) biopolimernom matriksu ispunjenog elektrohemijski dobijenim bakarnim prahom. Galvanostatski dobijen bakarni prah sa veoma poroznim, veoma dendritičnim i česticama sa velikom specifičnom površinom je korišćen kao punilac. Zapreminski udeo elektrohemijski dobijenog bakarnog praha je iznosio od 2.0 - 29.8 vol%. Analiza najznačajnijih osobina pripremljenih kompozita je obuhvatala merenja električne provodnosti, impedansnu spektroskopiju (IS) i strukturnu analizu. Značajan porast električne provodnosti se javlja kada udeo bakarnog praha dostigne vrednost perkolacionog praga (PP). Pokazano je da PP zavisi od oblika čestica i spatijalne distribucije. SEM analiza uzoraka je pokazala da čestice sa izraženim granicama zrna igraju veliku ulogu u pojavljivanju provodnih puteva i na elektroprovodljivost kompozita. Efekat pakovanja i izraženi međučestični kontantakti između čestica bakarnog praha sa velikom specifičnom površinom su doveli do pomeranja 
perkolacionog praga, koji za čestice 45 μm i pritisak od 27 MPa iznosi 7.2% v/v.
AB  - The electrical conductivity of the composite system based on lignocellulose (LC) biopolymer matrix electrodeposited copper powder filler has been studied. Highly porous, highly dendritic galvanostatically produced copper powder was used as filler since these particles have high values of specific area. Volume fraction of the electrodeposited copper powder was varied from 1.9 - 29.4 vol%. Analysis of the most significant properties of prepared composites and its components included impedance spectroscopy (IS) behavior, measurements of electrical conductivity, scanning electron microscopy (SEM) and structural analysis. The significant increase of the electrical conductivity could be observed as the copper powder content reaches the percolation threshold (PT). It was shown that PT depends on both particle shape and type of spatial distribution. IS measurements and SEM analysis have shown that particles having pronounced grain boundaries have great effect on appearance of electric conductive pathways thus on the composite conductivity. The packaging effect and more pronounced interpartical contact with copper powder particles lead to “movement” of PT, which for the particles <45 μm and highest processing pressure of 27 MPa was 7.2% (v/v). IS response of the composites showed existence of electrical 
conductive layers, each having different resistivity which increases towards interior of the composite.
PB  - Podgorica, Crna Gora : Crnogorsko društvo za koroziju, zaštitu materijala i zaštitu životne sredine
T2  - Zaštita materijala i životne sredine
T1  - Formiranje provodnih puteva kod lignoceluloznih kompozita punjenih elektrolitičkim bakarnim prahom
T1  - Formation of conductive pathways in electrolytic copper filled lignocellulose composites
VL  - III
IS  - 2
SP  - 62
EP  - 66
UR  - https://hdl.handle.net/21.15107/rcub_cer_6672
ER  - 

@article{
author = "Pavlović, Miroslav and Pavlović, Miomir and Aleksić, Radoslav and Nikolić, Nebojša D. and Stajić-Trošić, Jasna and Tomić, Milorad",
year = "2014",
abstract = "Ispitivana je električna provodljivost sistema baziranog na lignoceluloznom (LC) biopolimernom matriksu ispunjenog elektrohemijski dobijenim bakarnim prahom. Galvanostatski dobijen bakarni prah sa veoma poroznim, veoma dendritičnim i česticama sa velikom specifičnom površinom je korišćen kao punilac. Zapreminski udeo elektrohemijski dobijenog bakarnog praha je iznosio od 2.0 - 29.8 vol%. Analiza najznačajnijih osobina pripremljenih kompozita je obuhvatala merenja električne provodnosti, impedansnu spektroskopiju (IS) i strukturnu analizu. Značajan porast električne provodnosti se javlja kada udeo bakarnog praha dostigne vrednost perkolacionog praga (PP). Pokazano je da PP zavisi od oblika čestica i spatijalne distribucije. SEM analiza uzoraka je pokazala da čestice sa izraženim granicama zrna igraju veliku ulogu u pojavljivanju provodnih puteva i na elektroprovodljivost kompozita. Efekat pakovanja i izraženi međučestični kontantakti između čestica bakarnog praha sa velikom specifičnom površinom su doveli do pomeranja 
perkolacionog praga, koji za čestice 45 μm i pritisak od 27 MPa iznosi 7.2% v/v., The electrical conductivity of the composite system based on lignocellulose (LC) biopolymer matrix electrodeposited copper powder filler has been studied. Highly porous, highly dendritic galvanostatically produced copper powder was used as filler since these particles have high values of specific area. Volume fraction of the electrodeposited copper powder was varied from 1.9 - 29.4 vol%. Analysis of the most significant properties of prepared composites and its components included impedance spectroscopy (IS) behavior, measurements of electrical conductivity, scanning electron microscopy (SEM) and structural analysis. The significant increase of the electrical conductivity could be observed as the copper powder content reaches the percolation threshold (PT). It was shown that PT depends on both particle shape and type of spatial distribution. IS measurements and SEM analysis have shown that particles having pronounced grain boundaries have great effect on appearance of electric conductive pathways thus on the composite conductivity. The packaging effect and more pronounced interpartical contact with copper powder particles lead to “movement” of PT, which for the particles <45 μm and highest processing pressure of 27 MPa was 7.2% (v/v). IS response of the composites showed existence of electrical 
conductive layers, each having different resistivity which increases towards interior of the composite.",
publisher = "Podgorica, Crna Gora : Crnogorsko društvo za koroziju, zaštitu materijala i zaštitu životne sredine",
journal = "Zaštita materijala i životne sredine",
title = "Formiranje provodnih puteva kod lignoceluloznih kompozita punjenih elektrolitičkim bakarnim prahom, Formation of conductive pathways in electrolytic copper filled lignocellulose composites",
volume = "III",
number = "2",
pages = "62-66",
url = "https://hdl.handle.net/21.15107/rcub_cer_6672"
}

Pavlović, M., Pavlović, M., Aleksić, R., Nikolić, N. D., Stajić-Trošić, J.,& Tomić, M.. (2014). Formiranje provodnih puteva kod lignoceluloznih kompozita punjenih elektrolitičkim bakarnim prahom. in Zaštita materijala i životne sredine
Podgorica, Crna Gora : Crnogorsko društvo za koroziju, zaštitu materijala i zaštitu životne sredine., III(2), 62-66.
https://hdl.handle.net/21.15107/rcub_cer_6672

Pavlović M, Pavlović M, Aleksić R, Nikolić ND, Stajić-Trošić J, Tomić M. Formiranje provodnih puteva kod lignoceluloznih kompozita punjenih elektrolitičkim bakarnim prahom. in Zaštita materijala i životne sredine. 2014;III(2):62-66.
https://hdl.handle.net/21.15107/rcub_cer_6672 .

Pavlović, Miroslav, Pavlović, Miomir, Aleksić, Radoslav, Nikolić, Nebojša D., Stajić-Trošić, Jasna, Tomić, Milorad, "Formiranje provodnih puteva kod lignoceluloznih kompozita punjenih elektrolitičkim bakarnim prahom" in Zaštita materijala i životne sredine, III, no. 2 (2014):62-66,
https://hdl.handle.net/21.15107/rcub_cer_6672 .

TY  - JOUR
AU  - Nešić, Dejan M.
AU  - Stevanovic, D M
AU  - Djelic, M N
AU  - Mazic, S D
AU  - Stankovic, J B Trbojevic
AU  - Soldatovi, I I
AU  - Stajić-Trošić, Jasna
AU  - Starčević, V. P.
PY  - 2014
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/1472
AB  - The main purpose of this study was to evaluate specifically, ingestive behavior and bloodborne indicators of metabolic status, after daily intracerebroventricular (ICV) ghrelin injections, in rats of different ages. Four age ranges were tested: peripubertal (similar to 38 days), young (similar to 2 months), adult (similar to 7 months) and middle-aged (similar to 11 months). Multiple variables were measured, including body weight (BW), food and water intake (F, WI), and terminal blood levels of triglycerides (Tg), cholesterol (Chol), free fatty acids (FFA) and glucose (Glu). Five daily ICV injections of ghrelin or saline were administered (n = 8/group, 0.15 nmol of ghrelin in 5 mu L) to rats of different ages. After 5 days of treatment, ICV ghrelin resulted in an increased (p LT 0.05) absolute and relative BW, FI, WI and in elevated blood levels of Chol, Tg, and FFA as well, while blood Glu levels were decreased (p LT 0.05) within each of the four age-matched groups. Differences (p LT 0.05) in ghrelin effects over the ages included the following: relative FI was higher in 2 younger groups vs 2 older ones. Relative WI was higher in 2 younger groups vs 2 older ones. Tg, Chol and FFA in the oldest rats, both control and treated, were higher than corresponding values at the other 3 ages. The youngest age group had the lowest Glu after ghrelin.
PB  - Inst Materials Physics
T2  - Digest Journal of Nanomaterials and Biostructures
T1  - The effects of centrally applied ghrelin on appetite and metabolic parameters during aging
VL  - 9
IS  - 4
SP  - 1439
EP  - 1449
UR  - https://hdl.handle.net/21.15107/rcub_cer_1472
ER  - 

@article{
author = "Nešić, Dejan M. and Stevanovic, D M and Djelic, M N and Mazic, S D and Stankovic, J B Trbojevic and Soldatovi, I I and Stajić-Trošić, Jasna and Starčević, V. P.",
year = "2014",
abstract = "The main purpose of this study was to evaluate specifically, ingestive behavior and bloodborne indicators of metabolic status, after daily intracerebroventricular (ICV) ghrelin injections, in rats of different ages. Four age ranges were tested: peripubertal (similar to 38 days), young (similar to 2 months), adult (similar to 7 months) and middle-aged (similar to 11 months). Multiple variables were measured, including body weight (BW), food and water intake (F, WI), and terminal blood levels of triglycerides (Tg), cholesterol (Chol), free fatty acids (FFA) and glucose (Glu). Five daily ICV injections of ghrelin or saline were administered (n = 8/group, 0.15 nmol of ghrelin in 5 mu L) to rats of different ages. After 5 days of treatment, ICV ghrelin resulted in an increased (p LT 0.05) absolute and relative BW, FI, WI and in elevated blood levels of Chol, Tg, and FFA as well, while blood Glu levels were decreased (p LT 0.05) within each of the four age-matched groups. Differences (p LT 0.05) in ghrelin effects over the ages included the following: relative FI was higher in 2 younger groups vs 2 older ones. Relative WI was higher in 2 younger groups vs 2 older ones. Tg, Chol and FFA in the oldest rats, both control and treated, were higher than corresponding values at the other 3 ages. The youngest age group had the lowest Glu after ghrelin.",
publisher = "Inst Materials Physics",
journal = "Digest Journal of Nanomaterials and Biostructures",
title = "The effects of centrally applied ghrelin on appetite and metabolic parameters during aging",
volume = "9",
number = "4",
pages = "1439-1449",
url = "https://hdl.handle.net/21.15107/rcub_cer_1472"
}

Nešić, D. M., Stevanovic, D. M., Djelic, M. N., Mazic, S. D., Stankovic, J. B. T., Soldatovi, I. I., Stajić-Trošić, J.,& Starčević, V. P.. (2014). The effects of centrally applied ghrelin on appetite and metabolic parameters during aging. in Digest Journal of Nanomaterials and Biostructures
Inst Materials Physics., 9(4), 1439-1449.
https://hdl.handle.net/21.15107/rcub_cer_1472

Nešić DM, Stevanovic DM, Djelic MN, Mazic SD, Stankovic JBT, Soldatovi II, Stajić-Trošić J, Starčević VP. The effects of centrally applied ghrelin on appetite and metabolic parameters during aging. in Digest Journal of Nanomaterials and Biostructures. 2014;9(4):1439-1449.
https://hdl.handle.net/21.15107/rcub_cer_1472 .

Nešić, Dejan M., Stevanovic, D M, Djelic, M N, Mazic, S D, Stankovic, J B Trbojevic, Soldatovi, I I, Stajić-Trošić, Jasna, Starčević, V. P., "The effects of centrally applied ghrelin on appetite and metabolic parameters during aging" in Digest Journal of Nanomaterials and Biostructures, 9, no. 4 (2014):1439-1449,
https://hdl.handle.net/21.15107/rcub_cer_1472 .

TY  - JOUR
AU  - Stajić-Trošić, Jasna
AU  - Grujić, Aleksandar
AU  - Stijepović, Mirko Z.
AU  - Nedeljković, Dragutin
AU  - Stajčić, Aleksandar
AU  - Žak, Tomas
PY  - 2014
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/1476
AB  - Polymer bonded magnets are contemporary materials with a very large range of applications. The objective of this study is to assess how different content of Nd-Fe-B and/or barium ferrite particles affect on magnetic and morphological properties of bonded composite materials. Interactions between employed magnetic powders and interactions between magnetic powders and polymer binder are considered. For examination of the magnetic behavior Vibrating Sample Magnetometer (VSM) is used. Different shape and size of obtained hysteresis loops are used for comparison and prediction of polymer bonded materials properties.
AB  - Polimerom vezani magneti predstavljaju savremene materijale sa veoma širokim spektrom primene. Cilj ovog rada je da se analizira i prikaže kako različiti udeli čestica Nd-Fe-B i/ili barijum ferita utiču na magnetna i morfološka svojstva bonded kompozitnih materijala. Razmatrane su interakcije između primenjenih magnetnih prahova različitog tipa i interakcije između magnetnih prahova i polimerne matrice. Za merenje magnetnih svojstava kompozita korišćen je vibracioni magnetometar (VSM). Različiti oblici i veličine dobijenih histerezisnih petlji su poređeni i analizirani u cilju predviđanja magnetnog ponašanja kompozita.
PB  - Belgrade, Serbia : Engineering Society for Corrosion
T2  - Zaštita materijala
T1  - Magnetic behaviour of hybrid magnetic composite materials
T1  - Magnetno ponašanje hibridnih magnetnih kompozitnih materijala
VL  - 55
IS  - 2
SP  - 170
EP  - 172
DO  - 10.5937/ZasMat1402170S
ER  - 

@article{
author = "Stajić-Trošić, Jasna and Grujić, Aleksandar and Stijepović, Mirko Z. and Nedeljković, Dragutin and Stajčić, Aleksandar and Žak, Tomas",
year = "2014",
abstract = "Polymer bonded magnets are contemporary materials with a very large range of applications. The objective of this study is to assess how different content of Nd-Fe-B and/or barium ferrite particles affect on magnetic and morphological properties of bonded composite materials. Interactions between employed magnetic powders and interactions between magnetic powders and polymer binder are considered. For examination of the magnetic behavior Vibrating Sample Magnetometer (VSM) is used. Different shape and size of obtained hysteresis loops are used for comparison and prediction of polymer bonded materials properties., Polimerom vezani magneti predstavljaju savremene materijale sa veoma širokim spektrom primene. Cilj ovog rada je da se analizira i prikaže kako različiti udeli čestica Nd-Fe-B i/ili barijum ferita utiču na magnetna i morfološka svojstva bonded kompozitnih materijala. Razmatrane su interakcije između primenjenih magnetnih prahova različitog tipa i interakcije između magnetnih prahova i polimerne matrice. Za merenje magnetnih svojstava kompozita korišćen je vibracioni magnetometar (VSM). Različiti oblici i veličine dobijenih histerezisnih petlji su poređeni i analizirani u cilju predviđanja magnetnog ponašanja kompozita.",
publisher = "Belgrade, Serbia : Engineering Society for Corrosion",
journal = "Zaštita materijala",
title = "Magnetic behaviour of hybrid magnetic composite materials, Magnetno ponašanje hibridnih magnetnih kompozitnih materijala",
volume = "55",
number = "2",
pages = "170-172",
doi = "10.5937/ZasMat1402170S"
}

Stajić-Trošić, J., Grujić, A., Stijepović, M. Z., Nedeljković, D., Stajčić, A.,& Žak, T.. (2014). Magnetic behaviour of hybrid magnetic composite materials. in Zaštita materijala
Belgrade, Serbia : Engineering Society for Corrosion., 55(2), 170-172.
https://doi.org/10.5937/ZasMat1402170S

Stajić-Trošić J, Grujić A, Stijepović MZ, Nedeljković D, Stajčić A, Žak T. Magnetic behaviour of hybrid magnetic composite materials. in Zaštita materijala. 2014;55(2):170-172.
doi:10.5937/ZasMat1402170S .

Stajić-Trošić, Jasna, Grujić, Aleksandar, Stijepović, Mirko Z., Nedeljković, Dragutin, Stajčić, Aleksandar, Žak, Tomas, "Magnetic behaviour of hybrid magnetic composite materials" in Zaštita materijala, 55, no. 2 (2014):170-172,
https://doi.org/10.5937/ZasMat1402170S . .

TY  - JOUR
AU  - Markovic, B.
AU  - Živković, Dragana
AU  - Manasijević, Dragan
AU  - Sokic, M.
AU  - Minic, D.
AU  - Talijan, Nadežda M.
AU  - Stajić-Trošić, Jasna
PY  - 2014
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/1514
AB  - The Bi-Cu-Ni ternary system belongs to the group of potential Cu-Ni-based advanced lead-free solder materials for high temperature application. In this study microstructure investigation of the slow-cooled Bi-Cu-Ni samples was done using SEM-EDS analysis. The samples compositions were chosen along three cross-sections with molar ratio Cu:Ni=1:3, 1:1 and 3:1. The experimentally obtained phase structure was compared with the results of thermodynamic calculation according to CALPHAD method. Also, new results regarding thermal and electrical properties investigations of these alloys are presented in this paper, based on DSC and electroconductivity measurements.
PB  - Polish Acad Sciences Committee Metallurgy, Krakow
T2  - Archives of Metallurgy and Materials
T1  - Thermal, structural and electrical properties of some bi-cu-ni alloys
VL  - 59
IS  - 1
SP  - 117
EP  - 120
DO  - 10.2478/amm-2014-0018
ER  - 

@article{
author = "Markovic, B. and Živković, Dragana and Manasijević, Dragan and Sokic, M. and Minic, D. and Talijan, Nadežda M. and Stajić-Trošić, Jasna",
year = "2014",
abstract = "The Bi-Cu-Ni ternary system belongs to the group of potential Cu-Ni-based advanced lead-free solder materials for high temperature application. In this study microstructure investigation of the slow-cooled Bi-Cu-Ni samples was done using SEM-EDS analysis. The samples compositions were chosen along three cross-sections with molar ratio Cu:Ni=1:3, 1:1 and 3:1. The experimentally obtained phase structure was compared with the results of thermodynamic calculation according to CALPHAD method. Also, new results regarding thermal and electrical properties investigations of these alloys are presented in this paper, based on DSC and electroconductivity measurements.",
publisher = "Polish Acad Sciences Committee Metallurgy, Krakow",
journal = "Archives of Metallurgy and Materials",
title = "Thermal, structural and electrical properties of some bi-cu-ni alloys",
volume = "59",
number = "1",
pages = "117-120",
doi = "10.2478/amm-2014-0018"
}

Markovic, B., Živković, D., Manasijević, D., Sokic, M., Minic, D., Talijan, N. M.,& Stajić-Trošić, J.. (2014). Thermal, structural and electrical properties of some bi-cu-ni alloys. in Archives of Metallurgy and Materials
Polish Acad Sciences Committee Metallurgy, Krakow., 59(1), 117-120.
https://doi.org/10.2478/amm-2014-0018

Markovic B, Živković D, Manasijević D, Sokic M, Minic D, Talijan NM, Stajić-Trošić J. Thermal, structural and electrical properties of some bi-cu-ni alloys. in Archives of Metallurgy and Materials. 2014;59(1):117-120.
doi:10.2478/amm-2014-0018 .

Markovic, B., Živković, Dragana, Manasijević, Dragan, Sokic, M., Minic, D., Talijan, Nadežda M., Stajić-Trošić, Jasna, "Thermal, structural and electrical properties of some bi-cu-ni alloys" in Archives of Metallurgy and Materials, 59, no. 1 (2014):117-120,
https://doi.org/10.2478/amm-2014-0018 . .