TY  - JOUR
AU  - Milosavljević, Milan
AU  - Premović, Milena
AU  - Minić, Duško
AU  - Ćosović, Vladan
AU  - Đorđević, Aleksandar
AU  - Tomović, Milica
PY  - 2021
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/4765
AB  - Phase diagram of the Bi-Ce-Ge ternary system has been investigated experimentally and thermodynamically extrapolated by using Pandat software. Experimental results were obtained using differential thermal analysis (DTA), scanning electron microscopy (SEM) with energy dispersive spectrometry (EDS), and X-ray powder diffraction (XRD) methods. Examined ternary samples belong to two isothermal sections at 400 and 600 °C as well as three vertical sections Bi-CuGe, Cu-BiGe, and Ge-BiCu. No ternary compound has been detected in the equilibrated samples from the selected isothermal sections. Based on the presented experimental data and available literature data, description of the ternary system has been developed. A reasonable agreement between the experimental data and the calculated phase equilibria was obtained. As an example, ternary Cu80Bi10Ge10 alloy was selected for solidification simulations according to Scheil and Lever Rule assumptions as well as for simulation of the total fraction of each solid at different temperatures, latent heat, and total heat.
PB  - Brazil : SCI FLO
T2  - Materials Research
T1  - Experimental Investigation of Phase Equilibria in the Bi-Cu-Ge System
VL  - 24
IS  - 6
DO  - 10.1590/1980-5373-MR-2021-0201
ER  - 

@article{
author = "Milosavljević, Milan and Premović, Milena and Minić, Duško and Ćosović, Vladan and Đorđević, Aleksandar and Tomović, Milica",
year = "2021",
abstract = "Phase diagram of the Bi-Ce-Ge ternary system has been investigated experimentally and thermodynamically extrapolated by using Pandat software. Experimental results were obtained using differential thermal analysis (DTA), scanning electron microscopy (SEM) with energy dispersive spectrometry (EDS), and X-ray powder diffraction (XRD) methods. Examined ternary samples belong to two isothermal sections at 400 and 600 °C as well as three vertical sections Bi-CuGe, Cu-BiGe, and Ge-BiCu. No ternary compound has been detected in the equilibrated samples from the selected isothermal sections. Based on the presented experimental data and available literature data, description of the ternary system has been developed. A reasonable agreement between the experimental data and the calculated phase equilibria was obtained. As an example, ternary Cu80Bi10Ge10 alloy was selected for solidification simulations according to Scheil and Lever Rule assumptions as well as for simulation of the total fraction of each solid at different temperatures, latent heat, and total heat.",
publisher = "Brazil : SCI FLO",
journal = "Materials Research",
title = "Experimental Investigation of Phase Equilibria in the Bi-Cu-Ge System",
volume = "24",
number = "6",
doi = "10.1590/1980-5373-MR-2021-0201"
}

Milosavljević, M., Premović, M., Minić, D., Ćosović, V., Đorđević, A.,& Tomović, M.. (2021). Experimental Investigation of Phase Equilibria in the Bi-Cu-Ge System. in Materials Research
Brazil : SCI FLO., 24(6).
https://doi.org/10.1590/1980-5373-MR-2021-0201

Milosavljević M, Premović M, Minić D, Ćosović V, Đorđević A, Tomović M. Experimental Investigation of Phase Equilibria in the Bi-Cu-Ge System. in Materials Research. 2021;24(6).
doi:10.1590/1980-5373-MR-2021-0201 .

Milosavljević, Milan, Premović, Milena, Minić, Duško, Ćosović, Vladan, Đorđević, Aleksandar, Tomović, Milica, "Experimental Investigation of Phase Equilibria in the Bi-Cu-Ge System" in Materials Research, 24, no. 6 (2021),
https://doi.org/10.1590/1980-5373-MR-2021-0201 . .

TY  - CONF
AU  - Milosavljević, Milan
AU  - Polić, Suzana R.
PY  - 2019
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/7381
AB  - This paper examines the visuality from the aspect of semantic differences based on reflections of geometric similarities of two sculptural works: Barbara Hepworth (1903-1975) and Olga Jancic. Taking into consideration the case study of several works by these artists, the comparative analysis explores the issues of the following relationships of sculpture parameters in space: concave - convex, mass - volume, interior - exterior, openness - closedness. Starting from the influence by Henry Moore to the two artists, a multidisciplinary historical - artistic - biographical analysis is carried out in order to investigate the influence of the historical context for the creation of the sculptural opus Barbara Hepworth and Olga Jančić. The aim is to understand the semantic differences that arise on geometric similarities, as ideas of theses and antithesis that precede the realization of form.
AB  - Ovaj rad istražuje vizuelnost sa aspekta semantičkih razlika zasnovanih na odrazima geometrijskih sličnosti dva vajarska opusa: Barbare Hepvort (1903-1975) i Olge Jančić (1929-2012). Uzimajući za studiju slučaja više umetničkih dela ovih umetnica, komparativnom analizom istražujemo pitanja odnosa parametara skulpture u prostoru: konkavno - konveksno, masa - zapremina, unutrašnjost - spoljašnjost, otvorenost - zatvorenost. Polazeći od uticaja Henrija Mura na umetnice, vrši se multidisciplinarna istorijsko - umetničko - biografska analiza, kako bi se istražio uticaj istorijskog konteksta na stvaranje vajarskih opusa Barbare Hepvorth i Olge Jančić. Cilj je razumevanje semantičkih razlika koje nastaju na geometrijskim sličnostima, kao ideje teza i antiteza koje prethode realizaciji forme.
PB  - Beograd: Centralni Institut za konzervaciju / Belgrade: Central Institute for Conservation
PB  - Sopot: Scientific Association for the Development and Promotion of New Technologies
C3  - Proceedings of selected papers and abstracts - The Third International Students Scientific Conference "Multidisciplinary Approach to Contemporary Research - Cultural and Industrial Heritage"
T1  - Thesis and antithesis in visuality: one parallel, Barbara Hepwort and Olga Jančić
T1  - Teza i antiteza u vizuelnosti: jedna paralela, Barbara Hepwort i Olga Jančić
SP  - 242
EP  - 243
UR  - https://hdl.handle.net/21.15107/rcub_cer_7381
ER  - 

@conference{
author = "Milosavljević, Milan and Polić, Suzana R.",
year = "2019",
abstract = "This paper examines the visuality from the aspect of semantic differences based on reflections of geometric similarities of two sculptural works: Barbara Hepworth (1903-1975) and Olga Jancic. Taking into consideration the case study of several works by these artists, the comparative analysis explores the issues of the following relationships of sculpture parameters in space: concave - convex, mass - volume, interior - exterior, openness - closedness. Starting from the influence by Henry Moore to the two artists, a multidisciplinary historical - artistic - biographical analysis is carried out in order to investigate the influence of the historical context for the creation of the sculptural opus Barbara Hepworth and Olga Jančić. The aim is to understand the semantic differences that arise on geometric similarities, as ideas of theses and antithesis that precede the realization of form., Ovaj rad istražuje vizuelnost sa aspekta semantičkih razlika zasnovanih na odrazima geometrijskih sličnosti dva vajarska opusa: Barbare Hepvort (1903-1975) i Olge Jančić (1929-2012). Uzimajući za studiju slučaja više umetničkih dela ovih umetnica, komparativnom analizom istražujemo pitanja odnosa parametara skulpture u prostoru: konkavno - konveksno, masa - zapremina, unutrašnjost - spoljašnjost, otvorenost - zatvorenost. Polazeći od uticaja Henrija Mura na umetnice, vrši se multidisciplinarna istorijsko - umetničko - biografska analiza, kako bi se istražio uticaj istorijskog konteksta na stvaranje vajarskih opusa Barbare Hepvorth i Olge Jančić. Cilj je razumevanje semantičkih razlika koje nastaju na geometrijskim sličnostima, kao ideje teza i antiteza koje prethode realizaciji forme.",
publisher = "Beograd: Centralni Institut za konzervaciju / Belgrade: Central Institute for Conservation, Sopot: Scientific Association for the Development and Promotion of New Technologies",
journal = "Proceedings of selected papers and abstracts - The Third International Students Scientific Conference "Multidisciplinary Approach to Contemporary Research - Cultural and Industrial Heritage"",
title = "Thesis and antithesis in visuality: one parallel, Barbara Hepwort and Olga Jančić, Teza i antiteza u vizuelnosti: jedna paralela, Barbara Hepwort i Olga Jančić",
pages = "242-243",
url = "https://hdl.handle.net/21.15107/rcub_cer_7381"
}

Milosavljević, M.,& Polić, S. R.. (2019). Thesis and antithesis in visuality: one parallel, Barbara Hepwort and Olga Jančić. in Proceedings of selected papers and abstracts - The Third International Students Scientific Conference "Multidisciplinary Approach to Contemporary Research - Cultural and Industrial Heritage"
Beograd: Centralni Institut za konzervaciju / Belgrade: Central Institute for Conservation., 242-243.
https://hdl.handle.net/21.15107/rcub_cer_7381

Milosavljević M, Polić SR. Thesis and antithesis in visuality: one parallel, Barbara Hepwort and Olga Jančić. in Proceedings of selected papers and abstracts - The Third International Students Scientific Conference "Multidisciplinary Approach to Contemporary Research - Cultural and Industrial Heritage". 2019;:242-243.
https://hdl.handle.net/21.15107/rcub_cer_7381 .

Milosavljević, Milan, Polić, Suzana R., "Thesis and antithesis in visuality: one parallel, Barbara Hepwort and Olga Jančić" in Proceedings of selected papers and abstracts - The Third International Students Scientific Conference "Multidisciplinary Approach to Contemporary Research - Cultural and Industrial Heritage" (2019):242-243,
https://hdl.handle.net/21.15107/rcub_cer_7381 .

TY  - CONF
AU  - Polić-Radovanović, Suzana R.
AU  - Petronić, Sanja
AU  - Milosavljević, Anđelka
AU  - Srećković, Milesa
AU  - Milosavljević, Milan
AU  - Milosavljević, Jelena
PY  - 2012
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/6595
AB  - The traditional technologies are an important part in the protection of cultural heritage, because technological development always confirm the processes of defining of the different cultures identity. In this paper, in the context of sustainable development and environmental protection, we present the study of classical and innovative conservation model of traditional technology based on the examples Tripitaka Koreana, and works of British researchers Tim Noble, Sue Webster and David Clarke.
PB  - Užice: High Business-Technical School of Užice
C3  - Proceedings - 5th International Conference "Science and Higher Education in Function of Sustainable Development" – SED 2012, 04-05/10/2012, Užice, Serbia
T1  - Traditional technology, innovation and sustainable development
SP  - 166
EP  - 170
UR  - https://hdl.handle.net/21.15107/rcub_cer_6595
ER  - 

@conference{
author = "Polić-Radovanović, Suzana R. and Petronić, Sanja and Milosavljević, Anđelka and Srećković, Milesa and Milosavljević, Milan and Milosavljević, Jelena",
year = "2012",
abstract = "The traditional technologies are an important part in the protection of cultural heritage, because technological development always confirm the processes of defining of the different cultures identity. In this paper, in the context of sustainable development and environmental protection, we present the study of classical and innovative conservation model of traditional technology based on the examples Tripitaka Koreana, and works of British researchers Tim Noble, Sue Webster and David Clarke.",
publisher = "Užice: High Business-Technical School of Užice",
journal = "Proceedings - 5th International Conference "Science and Higher Education in Function of Sustainable Development" – SED 2012, 04-05/10/2012, Užice, Serbia",
title = "Traditional technology, innovation and sustainable development",
pages = "166-170",
url = "https://hdl.handle.net/21.15107/rcub_cer_6595"
}

Polić-Radovanović, S. R., Petronić, S., Milosavljević, A., Srećković, M., Milosavljević, M.,& Milosavljević, J.. (2012). Traditional technology, innovation and sustainable development. in Proceedings - 5th International Conference "Science and Higher Education in Function of Sustainable Development" – SED 2012, 04-05/10/2012, Užice, Serbia
Užice: High Business-Technical School of Užice., 166-170.
https://hdl.handle.net/21.15107/rcub_cer_6595

Polić-Radovanović SR, Petronić S, Milosavljević A, Srećković M, Milosavljević M, Milosavljević J. Traditional technology, innovation and sustainable development. in Proceedings - 5th International Conference "Science and Higher Education in Function of Sustainable Development" – SED 2012, 04-05/10/2012, Užice, Serbia. 2012;:166-170.
https://hdl.handle.net/21.15107/rcub_cer_6595 .

Polić-Radovanović, Suzana R., Petronić, Sanja, Milosavljević, Anđelka, Srećković, Milesa, Milosavljević, Milan, Milosavljević, Jelena, "Traditional technology, innovation and sustainable development" in Proceedings - 5th International Conference "Science and Higher Education in Function of Sustainable Development" – SED 2012, 04-05/10/2012, Užice, Serbia (2012):166-170,
https://hdl.handle.net/21.15107/rcub_cer_6595 .

TY  - JOUR
AU  - Polić-Radovanović, Suzana R.
AU  - Milosavljević, Anđelka
AU  - Petronić, Sanja
AU  - Drobnjak, Predrag
AU  - Milosavljević, Milan
PY  - 2012
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/7377
AB  - Energetske tehnologije predstavljaju integralni deo industrijskog nasleđa u okviru Evropskog puta industrijske baštine, koji obuhvata preko osam stotina gradova i mesta u 29 evropskih zemalja. Tema ove rute pokazuje ulogu industrijalizacije u ukupnoj evropskoj savremenoj istoriji, a način tretiranja industrijskih objekata čija je namena prevaziđena, govori o odnosu različitih evropskih sredina prema sostvenoj industrijskoj kulturi. Ovo istraživanje bavi se stanjem  energetskog industrijskog nasleđa u Srbiji, kao i mogućnošću njegovog inkorporiranja u Evropski put industrijske baštine, sa posebnim osvrtom na heritološke zahteve u procesu očuvanja.
AB  - Energy technologies are an integral part industrial heritage in the European path of industrial heritage, which includes over eight hundred cities and towns in 29 European countries. The theme of this route shows the role of total European industrialization in modern history, a method of protection of industrial facilities whose purpose is overcome, about the relationship of various European backgrounds to their own industrial culture. This research related to the industrial heritage in Serbia, and present well as the possibility of its incorporation into the European way of industrial heritage, with particular reference to heritological requirements in the preservation process.
PB  - Beograd: Savez energetičara
T2  - Energija, ekonomija, ekologija
T1  - Energetski kompleksi u evropskoj industrijskoj baštini
T1  - Energy complexes in European industial heritage
VL  - XIV
IS  - 3-4
SP  - 321
EP  - 327
UR  - https://hdl.handle.net/21.15107/rcub_cer_7377
ER  - 

@article{
author = "Polić-Radovanović, Suzana R. and Milosavljević, Anđelka and Petronić, Sanja and Drobnjak, Predrag and Milosavljević, Milan",
year = "2012",
abstract = "Energetske tehnologije predstavljaju integralni deo industrijskog nasleđa u okviru Evropskog puta industrijske baštine, koji obuhvata preko osam stotina gradova i mesta u 29 evropskih zemalja. Tema ove rute pokazuje ulogu industrijalizacije u ukupnoj evropskoj savremenoj istoriji, a način tretiranja industrijskih objekata čija je namena prevaziđena, govori o odnosu različitih evropskih sredina prema sostvenoj industrijskoj kulturi. Ovo istraživanje bavi se stanjem  energetskog industrijskog nasleđa u Srbiji, kao i mogućnošću njegovog inkorporiranja u Evropski put industrijske baštine, sa posebnim osvrtom na heritološke zahteve u procesu očuvanja., Energy technologies are an integral part industrial heritage in the European path of industrial heritage, which includes over eight hundred cities and towns in 29 European countries. The theme of this route shows the role of total European industrialization in modern history, a method of protection of industrial facilities whose purpose is overcome, about the relationship of various European backgrounds to their own industrial culture. This research related to the industrial heritage in Serbia, and present well as the possibility of its incorporation into the European way of industrial heritage, with particular reference to heritological requirements in the preservation process.",
publisher = "Beograd: Savez energetičara",
journal = "Energija, ekonomija, ekologija",
title = "Energetski kompleksi u evropskoj industrijskoj baštini, Energy complexes in European industial heritage",
volume = "XIV",
number = "3-4",
pages = "321-327",
url = "https://hdl.handle.net/21.15107/rcub_cer_7377"
}

Polić-Radovanović, S. R., Milosavljević, A., Petronić, S., Drobnjak, P.,& Milosavljević, M.. (2012). Energetski kompleksi u evropskoj industrijskoj baštini. in Energija, ekonomija, ekologija
Beograd: Savez energetičara., XIV(3-4), 321-327.
https://hdl.handle.net/21.15107/rcub_cer_7377

Polić-Radovanović SR, Milosavljević A, Petronić S, Drobnjak P, Milosavljević M. Energetski kompleksi u evropskoj industrijskoj baštini. in Energija, ekonomija, ekologija. 2012;XIV(3-4):321-327.
https://hdl.handle.net/21.15107/rcub_cer_7377 .

Polić-Radovanović, Suzana R., Milosavljević, Anđelka, Petronić, Sanja, Drobnjak, Predrag, Milosavljević, Milan, "Energetski kompleksi u evropskoj industrijskoj baštini" in Energija, ekonomija, ekologija, XIV, no. 3-4 (2012):321-327,
https://hdl.handle.net/21.15107/rcub_cer_7377 .

TY  - CONF
AU  - Polić-Radovanović, Suzana R.
AU  - Srećković, Milesa
AU  - Milosavljević, Milan
PY  - 2011
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/7385
AB  - Savremene tehnologije nalaze veliku primenu u oblasti zaštite kulturne baštine. Posebno interesantno polje odnosi se na izradu „beskontaktnih“ replika umetničkih i arheoloških predmeta, kao i na restauraciju oštećenih spomenika kulture i industrijske baštine. U radu je predstavljeno istraživanje semantike primena tehnika 3D laserskog skeniranja, CAD / CAM i CNC tehnologija u zaštiti kulturne baštine u kontekstu postindustrijskog društva.
AB  - The modern technologies are widely applaid in the field of cultural heritage. Particulary interesting field related to the production of „contactless“ replicas of art and archaeological objects, as well as the restoration of damaged cultural monuments and industrial heritage. This paper presents the research of semantics of the application of research techniques 3D laser scanning, CAD / CAM and CNC technology to protect cultural heritage in the context of postindustrial society.
PB  - Beograd: Univerzitet u Beogradu - Mašinski fakultet / Belgrade: University of Belgrade - Faculty of Mechanical Engineering
C3  - Proceedings - 24th simposium in 37th JUPITER CONFERENCE with foreign participants
T1  - 3D lasersko skeniranje, CAD / CAM i CNC tehnologije u zaštiti kulturne baštine
T1  - 3D Laser Scanning, CAD / CAM and CNC Technology in the field of Cultural Heritage
SP  - 2.74
EP  - 2.79
UR  - https://hdl.handle.net/21.15107/rcub_cer_7385
ER  - 

@conference{
author = "Polić-Radovanović, Suzana R. and Srećković, Milesa and Milosavljević, Milan",
year = "2011",
abstract = "Savremene tehnologije nalaze veliku primenu u oblasti zaštite kulturne baštine. Posebno interesantno polje odnosi se na izradu „beskontaktnih“ replika umetničkih i arheoloških predmeta, kao i na restauraciju oštećenih spomenika kulture i industrijske baštine. U radu je predstavljeno istraživanje semantike primena tehnika 3D laserskog skeniranja, CAD / CAM i CNC tehnologija u zaštiti kulturne baštine u kontekstu postindustrijskog društva., The modern technologies are widely applaid in the field of cultural heritage. Particulary interesting field related to the production of „contactless“ replicas of art and archaeological objects, as well as the restoration of damaged cultural monuments and industrial heritage. This paper presents the research of semantics of the application of research techniques 3D laser scanning, CAD / CAM and CNC technology to protect cultural heritage in the context of postindustrial society.",
publisher = "Beograd: Univerzitet u Beogradu - Mašinski fakultet / Belgrade: University of Belgrade - Faculty of Mechanical Engineering",
journal = "Proceedings - 24th simposium in 37th JUPITER CONFERENCE with foreign participants",
title = "3D lasersko skeniranje, CAD / CAM i CNC tehnologije u zaštiti kulturne baštine, 3D Laser Scanning, CAD / CAM and CNC Technology in the field of Cultural Heritage",
pages = "2.74-2.79",
url = "https://hdl.handle.net/21.15107/rcub_cer_7385"
}

Polić-Radovanović, S. R., Srećković, M.,& Milosavljević, M.. (2011). 3D lasersko skeniranje, CAD / CAM i CNC tehnologije u zaštiti kulturne baštine. in Proceedings - 24th simposium in 37th JUPITER CONFERENCE with foreign participants
Beograd: Univerzitet u Beogradu - Mašinski fakultet / Belgrade: University of Belgrade - Faculty of Mechanical Engineering., 2.74-2.79.
https://hdl.handle.net/21.15107/rcub_cer_7385

Polić-Radovanović SR, Srećković M, Milosavljević M. 3D lasersko skeniranje, CAD / CAM i CNC tehnologije u zaštiti kulturne baštine. in Proceedings - 24th simposium in 37th JUPITER CONFERENCE with foreign participants. 2011;:2.74-2.79.
https://hdl.handle.net/21.15107/rcub_cer_7385 .

Polić-Radovanović, Suzana R., Srećković, Milesa, Milosavljević, Milan, "3D lasersko skeniranje, CAD / CAM i CNC tehnologije u zaštiti kulturne baštine" in Proceedings - 24th simposium in 37th JUPITER CONFERENCE with foreign participants (2011):2.74-2.79,
https://hdl.handle.net/21.15107/rcub_cer_7385 .