TY  - JOUR
AU  - Talijan, Nadežda
AU  - Menushenkov, Vladimir
AU  - Milutinović Nikolić, Aleksandra
AU  - Jovanović, Žarko
PY  - 1999
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/6781
AB  - Razmatran je uticaj procesnih promenljivih na mikrostrukturu i magnetna svojstva sinterovanih SmCo5 magneta. Neposredan uticaj mikrostrukture na magnetna svojstva sinterovanih uzoraka omogućava sagledavanje procesa dobijanja sinterovanih SmCo5 magneta u svetlu trijade "sinteza-struktura-svojstva.
Istraživani SmCo5 magneti su pripremani standardnim tehnikama P/M. Sinterovani uzorci podvrgnuti su SEM, mikrorendgenskoj analizi i ispitivanju magnetnih svojstava. Pogodnom matematičkom analizom utvrđena je distribucija i procentni udeo pojedinih faza. 
Konstatovano je da najbolja magnetna svojstva imaju uzorci sa najvećim udelom glavne magnetične faze i najmanjom zastupljenošću pora. S obzirom da je polazni materijal za sve dobijene uzorke prah istog kvaliteta i da su uslovi mlevenja, kompaktiranja i usmeravanja isti, jedini promenljivi procesni parametar su uslovi sinterovanja i termičke obrade. Najpovoljnija magnetna svojstva ostvarena su kod uzorka koji je sinterovan na 1140 °C, 45 minuta, uz definisan režim termičke obrade.
PB  - Savez inženjera metalurgije Srbije
T2  - Metalurgija - Journal of metallurgy
T1  - Međusobna zavisnost uslova sinterovanja, mikrostrukture i magnetnih svojstava sinterovanih SmCo5 magneta
VL  - 5
IS  - 2
SP  - 99
EP  - 105
UR  - https://hdl.handle.net/21.15107/rcub_cer_6781
ER  - 

@article{
author = "Talijan, Nadežda and Menushenkov, Vladimir and Milutinović Nikolić, Aleksandra and Jovanović, Žarko",
year = "1999",
abstract = "Razmatran je uticaj procesnih promenljivih na mikrostrukturu i magnetna svojstva sinterovanih SmCo5 magneta. Neposredan uticaj mikrostrukture na magnetna svojstva sinterovanih uzoraka omogućava sagledavanje procesa dobijanja sinterovanih SmCo5 magneta u svetlu trijade "sinteza-struktura-svojstva.
Istraživani SmCo5 magneti su pripremani standardnim tehnikama P/M. Sinterovani uzorci podvrgnuti su SEM, mikrorendgenskoj analizi i ispitivanju magnetnih svojstava. Pogodnom matematičkom analizom utvrđena je distribucija i procentni udeo pojedinih faza. 
Konstatovano je da najbolja magnetna svojstva imaju uzorci sa najvećim udelom glavne magnetične faze i najmanjom zastupljenošću pora. S obzirom da je polazni materijal za sve dobijene uzorke prah istog kvaliteta i da su uslovi mlevenja, kompaktiranja i usmeravanja isti, jedini promenljivi procesni parametar su uslovi sinterovanja i termičke obrade. Najpovoljnija magnetna svojstva ostvarena su kod uzorka koji je sinterovan na 1140 °C, 45 minuta, uz definisan režim termičke obrade.",
publisher = "Savez inženjera metalurgije Srbije",
journal = "Metalurgija - Journal of metallurgy",
title = "Međusobna zavisnost uslova sinterovanja, mikrostrukture i magnetnih svojstava sinterovanih SmCo5 magneta",
volume = "5",
number = "2",
pages = "99-105",
url = "https://hdl.handle.net/21.15107/rcub_cer_6781"
}

Talijan, N., Menushenkov, V., Milutinović Nikolić, A.,& Jovanović, Ž.. (1999). Međusobna zavisnost uslova sinterovanja, mikrostrukture i magnetnih svojstava sinterovanih SmCo5 magneta. in Metalurgija - Journal of metallurgy
Savez inženjera metalurgije Srbije., 5(2), 99-105.
https://hdl.handle.net/21.15107/rcub_cer_6781

Talijan N, Menushenkov V, Milutinović Nikolić A, Jovanović Ž. Međusobna zavisnost uslova sinterovanja, mikrostrukture i magnetnih svojstava sinterovanih SmCo5 magneta. in Metalurgija - Journal of metallurgy. 1999;5(2):99-105.
https://hdl.handle.net/21.15107/rcub_cer_6781 .

Talijan, Nadežda, Menushenkov, Vladimir, Milutinović Nikolić, Aleksandra, Jovanović, Žarko, "Međusobna zavisnost uslova sinterovanja, mikrostrukture i magnetnih svojstava sinterovanih SmCo5 magneta" in Metalurgija - Journal of metallurgy, 5, no. 2 (1999):99-105,
https://hdl.handle.net/21.15107/rcub_cer_6781 .

TY  - JOUR
AU  - Talijan, Nadežda
AU  - Milutinović Nikolić, Aleksandra
AU  - Stajić-Trošić, Jasna
AU  - Jovanović, Žarko
PY  - 1999
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/6264
AB  - During the investigation and design of laboratory model of a Sintered SmCo5 magnet, a group of methods for characterizing sintered and heat treated magnets was defined. The direct dependence of the magnetic properties of sintered magnets on the microstructure and phase composition gives special significance to the methods of scanning electron microscopy (SEM) with appropriate software for quantification of visual information (QVI) and X-ray diffraction analysis. The chosen characterization methods are discussed in this paper with a separate presentation of the SEM and X-ray diffraction methods in optimizing the sintering and heat treatment phases in the procedure for obtaining these magnets.
PB  - Association for ETRAN Society
T2  - Science of Sintering
T1  - The Characterization of Sintered SmCo5 Magnets
VL  - 31
IS  - 1
SP  - 43
EP  - 50
UR  - https://hdl.handle.net/21.15107/rcub_cer_6264
ER  - 

@article{
author = "Talijan, Nadežda and Milutinović Nikolić, Aleksandra and Stajić-Trošić, Jasna and Jovanović, Žarko",
year = "1999",
abstract = "During the investigation and design of laboratory model of a Sintered SmCo5 magnet, a group of methods for characterizing sintered and heat treated magnets was defined. The direct dependence of the magnetic properties of sintered magnets on the microstructure and phase composition gives special significance to the methods of scanning electron microscopy (SEM) with appropriate software for quantification of visual information (QVI) and X-ray diffraction analysis. The chosen characterization methods are discussed in this paper with a separate presentation of the SEM and X-ray diffraction methods in optimizing the sintering and heat treatment phases in the procedure for obtaining these magnets.",
publisher = "Association for ETRAN Society",
journal = "Science of Sintering",
title = "The Characterization of Sintered SmCo5 Magnets",
volume = "31",
number = "1",
pages = "43-50",
url = "https://hdl.handle.net/21.15107/rcub_cer_6264"
}

Talijan, N., Milutinović Nikolić, A., Stajić-Trošić, J.,& Jovanović, Ž.. (1999). The Characterization of Sintered SmCo5 Magnets. in Science of Sintering
Association for ETRAN Society., 31(1), 43-50.
https://hdl.handle.net/21.15107/rcub_cer_6264

Talijan N, Milutinović Nikolić A, Stajić-Trošić J, Jovanović Ž. The Characterization of Sintered SmCo5 Magnets. in Science of Sintering. 1999;31(1):43-50.
https://hdl.handle.net/21.15107/rcub_cer_6264 .

Talijan, Nadežda, Milutinović Nikolić, Aleksandra, Stajić-Trošić, Jasna, Jovanović, Žarko, "The Characterization of Sintered SmCo5 Magnets" in Science of Sintering, 31, no. 1 (1999):43-50,
https://hdl.handle.net/21.15107/rcub_cer_6264 .

TY  - JOUR
AU  - Talijan, Nadežda M.
AU  - Milutinović Nikolić, Aleksandra
AU  - Stajić-Trošić, Jasna
AU  - Jovanović, Žarko
PY  - 1997
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/4175
AB  - The  content of the SmCo5 phase, as the carrier of magnetic  properties, was controlled by X-ray diffraction analysis. The content of the SmCo5 phase, as a function of  sintering time and temperature, under constant heat treatment conditions, was observed through the intensity of its most significant  diffraction peak, which corresponds to the (111) plane. By correlating  these parameters  with a mathematical treatment, a mutual dependence was established. A regression dependence  was obtained that showed  that the intensity of the diffraction peak of the (111) plane of the SmCo5 phase depends upon the squares of both  the sintering time and temperature, for given heat treatment conditions. It is possible to optimize the sintering conditions by calculating values of sintering time and temperature for which this dependence has its maximum.
PB  - Sintering Society
T2  - Science of Sintering
T1  - X-Ray Analysis in the Optimization  of the Sintering Process of  SmCo5 Magnets
VL  - 29
IS  - 2
SP  - 69
EP  - 75
UR  - https://hdl.handle.net/21.15107/rcub_cer_4175
ER  - 

@article{
author = "Talijan, Nadežda M. and Milutinović Nikolić, Aleksandra and Stajić-Trošić, Jasna and Jovanović, Žarko",
year = "1997",
abstract = "The  content of the SmCo5 phase, as the carrier of magnetic  properties, was controlled by X-ray diffraction analysis. The content of the SmCo5 phase, as a function of  sintering time and temperature, under constant heat treatment conditions, was observed through the intensity of its most significant  diffraction peak, which corresponds to the (111) plane. By correlating  these parameters  with a mathematical treatment, a mutual dependence was established. A regression dependence  was obtained that showed  that the intensity of the diffraction peak of the (111) plane of the SmCo5 phase depends upon the squares of both  the sintering time and temperature, for given heat treatment conditions. It is possible to optimize the sintering conditions by calculating values of sintering time and temperature for which this dependence has its maximum.",
publisher = "Sintering Society",
journal = "Science of Sintering",
title = "X-Ray Analysis in the Optimization  of the Sintering Process of  SmCo5 Magnets",
volume = "29",
number = "2",
pages = "69-75",
url = "https://hdl.handle.net/21.15107/rcub_cer_4175"
}

Talijan, N. M., Milutinović Nikolić, A., Stajić-Trošić, J.,& Jovanović, Ž.. (1997). X-Ray Analysis in the Optimization  of the Sintering Process of  SmCo5 Magnets. in Science of Sintering
Sintering Society., 29(2), 69-75.
https://hdl.handle.net/21.15107/rcub_cer_4175

Talijan NM, Milutinović Nikolić A, Stajić-Trošić J, Jovanović Ž. X-Ray Analysis in the Optimization  of the Sintering Process of  SmCo5 Magnets. in Science of Sintering. 1997;29(2):69-75.
https://hdl.handle.net/21.15107/rcub_cer_4175 .

Talijan, Nadežda M., Milutinović Nikolić, Aleksandra, Stajić-Trošić, Jasna, Jovanović, Žarko, "X-Ray Analysis in the Optimization  of the Sintering Process of  SmCo5 Magnets" in Science of Sintering, 29, no. 2 (1997):69-75,
https://hdl.handle.net/21.15107/rcub_cer_4175 .

TY  - JOUR
AU  - Talijan, Nadežda M.
AU  - Milutinović Nikolić, Aleksandra
AU  - Jovanović, Žarko
PY  - 1996
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/4174
AB  - The dependence of magnetic properties of sintered magnetic materials, demands the quantification of the milling conditions. In this paper the part of the results of the investigation of the phase of milling of SmCo5 powder in investigated technological procedure for production of sintered SmCo5 magnets are presented. The dependence of particle size of SmCo5 powder and oxygen pick-of milling time has been investigated. By X-ray diffraction the occurrence of magnetic SmCo5 phase has been observed. According to experimental data, the optimal milling time has been established, obtaining  the required SmCo5 powder particle size and having the allowed oxygen content.
AB  - Зависност магнетних својстава синтерованих магнетних материјала захтева квантификацију услова глодања. У овом раду су представљени део резултата испитивања фазе млевења SmCO5  праха у истраженом технолошком поступку за производњу синтерованих SmCo5 магнета. Истражена је зависност величине честица SmCO5 праха и времена млевења при одабирању кисеоника. Дифракцијом Кс-зрака примећена је појава магнетне SmCO5  фазе. Према експерименталним подацима, успостављено је оптимално време млевења, добиjањем потребне величине честица праха SmCO5  и дозвољеним садржајем кисеоника.
PB  - Kiev, Ukraine : Nauka dumka
T2  - Poroshkovaya Metallurgiya
T1  - The influence of milling conditions on the properties of powder of intermetallic compound SmCo5
T1  - Uticaj uslova mlevenja na svojstva intermetalnog jedinjenja SmCo5
VL  - 5/6
SP  - 100
EP  - 103
UR  - https://hdl.handle.net/21.15107/rcub_cer_4174
ER  - 

@article{
author = "Talijan, Nadežda M. and Milutinović Nikolić, Aleksandra and Jovanović, Žarko",
year = "1996",
abstract = "The dependence of magnetic properties of sintered magnetic materials, demands the quantification of the milling conditions. In this paper the part of the results of the investigation of the phase of milling of SmCo5 powder in investigated technological procedure for production of sintered SmCo5 magnets are presented. The dependence of particle size of SmCo5 powder and oxygen pick-of milling time has been investigated. By X-ray diffraction the occurrence of magnetic SmCo5 phase has been observed. According to experimental data, the optimal milling time has been established, obtaining  the required SmCo5 powder particle size and having the allowed oxygen content., Зависност магнетних својстава синтерованих магнетних материјала захтева квантификацију услова глодања. У овом раду су представљени део резултата испитивања фазе млевења SmCO5  праха у истраженом технолошком поступку за производњу синтерованих SmCo5 магнета. Истражена је зависност величине честица SmCO5 праха и времена млевења при одабирању кисеоника. Дифракцијом Кс-зрака примећена је појава магнетне SmCO5  фазе. Према експерименталним подацима, успостављено је оптимално време млевења, добиjањем потребне величине честица праха SmCO5  и дозвољеним садржајем кисеоника.",
publisher = "Kiev, Ukraine : Nauka dumka",
journal = "Poroshkovaya Metallurgiya",
title = "The influence of milling conditions on the properties of powder of intermetallic compound SmCo5, Uticaj uslova mlevenja na svojstva intermetalnog jedinjenja SmCo5",
volume = "5/6",
pages = "100-103",
url = "https://hdl.handle.net/21.15107/rcub_cer_4174"
}

Talijan, N. M., Milutinović Nikolić, A.,& Jovanović, Ž.. (1996). The influence of milling conditions on the properties of powder of intermetallic compound SmCo5. in Poroshkovaya Metallurgiya
Kiev, Ukraine : Nauka dumka., 5/6, 100-103.
https://hdl.handle.net/21.15107/rcub_cer_4174

Talijan NM, Milutinović Nikolić A, Jovanović Ž. The influence of milling conditions on the properties of powder of intermetallic compound SmCo5. in Poroshkovaya Metallurgiya. 1996;5/6:100-103.
https://hdl.handle.net/21.15107/rcub_cer_4174 .

Talijan, Nadežda M., Milutinović Nikolić, Aleksandra, Jovanović, Žarko, "The influence of milling conditions on the properties of powder of intermetallic compound SmCo5" in Poroshkovaya Metallurgiya, 5/6 (1996):100-103,
https://hdl.handle.net/21.15107/rcub_cer_4174 .

TY  - JOUR
AU  - Talijan, Nadežda M.
AU  - Milutinović Nikolić, Aleksandra
AU  - Jovanović, Žarko
PY  - 1996
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/4165
AB  - Understanding of the thermal stability of intermetallic  SmCo5 powder is essential for designing the working atmosphere in all phases of the technological procedure  in the production of sintered SmCo5 magnets to obtain maximal magnetic properties. The thermal stability of the SmCo5 powder with defined chemical composition and particle size was investigated in the interval from 20 to 900*C. Commercial SmCo5 powder was used in this experiment. The powder was milled in anhydrous toluene in an agate mortar to fine powder of quality used in the production of sintered magnets.  All the experiments were carried out with  powder of an average particle size of 7.23*m, established by SEM. The  thermal stability of the SmCo5 powder in static air atmosphere  was investigated by thermogravimetric analysis  (TGA) using  a DuPont Thermal Analyzer. Investigation of the behavior of  SmCo5 powder during heating was carried out using new samples of  SmCo5 powder for each  of the investigated temperature cycles. It was found by TGA  that up to 200*C, the oxidation of SmCo5 was negligible. X-Ray diffraction of the thermogravimetric experimental residue of the SmCo5 powder, heated at 240*C, yielded only the presence of the SmCo5 phase. By X-ray diffraction different crystal forms were identified depending on the maximal heating temperature. The following phases were identified: Sm2O3, Co, CoO, Co3O4 and SmCoO3. According to TG and X-ray results, for each of the investigated temperatures, the corresponding chemical reactions were established. The experimental data from both the thermal and X-ray investigations confirm that the phases of pressing and aligning the SmCo5 powder, in the process of producing  sintered SmCo5 magnets, may be performed without a protective  atmosphere.
AB  - Истражена је могућност коришћења вакуума на граници између ниског и високог (10-3-10-4 bar) као заштитне атмосфере у фазама синтеровања и термичке обраде SmCo5 магнета. Испитан је утицај заштитне атмосфере на структурне промене SmCo5 магнета за различите температурне и временске интервале синтеровања, а за константну температуру и у време термичке обраде. Присуство оксидних и других инклузија у било ком делу синтерованих SmCo5 узорака, осим у површинском слоју, није доказано. Сканирајућом електронском микроскопијом (СЕМ), коришћењем Texture Analysis System-a ( TAS´+) мерена је дебљина оскидне зоне. Утврђен је регресиони модел према коме дебљина оксидне зоне расте са квадратом температуре синтеровања, а линеарно са временом синтеровања, за дефинисану температуру термичке обраде.
PB  - ETRAN Society
T2  - Science of Sintering
T1  - The influence of protective atmosphere on oxidation of sintered SmCo5 magnetic materials
VL  - 28
IS  - Special Issue
SP  - 179
EP  - 184
UR  - https://hdl.handle.net/21.15107/rcub_cer_4165
ER  - 

@article{
author = "Talijan, Nadežda M. and Milutinović Nikolić, Aleksandra and Jovanović, Žarko",
year = "1996",
abstract = "Understanding of the thermal stability of intermetallic  SmCo5 powder is essential for designing the working atmosphere in all phases of the technological procedure  in the production of sintered SmCo5 magnets to obtain maximal magnetic properties. The thermal stability of the SmCo5 powder with defined chemical composition and particle size was investigated in the interval from 20 to 900*C. Commercial SmCo5 powder was used in this experiment. The powder was milled in anhydrous toluene in an agate mortar to fine powder of quality used in the production of sintered magnets.  All the experiments were carried out with  powder of an average particle size of 7.23*m, established by SEM. The  thermal stability of the SmCo5 powder in static air atmosphere  was investigated by thermogravimetric analysis  (TGA) using  a DuPont Thermal Analyzer. Investigation of the behavior of  SmCo5 powder during heating was carried out using new samples of  SmCo5 powder for each  of the investigated temperature cycles. It was found by TGA  that up to 200*C, the oxidation of SmCo5 was negligible. X-Ray diffraction of the thermogravimetric experimental residue of the SmCo5 powder, heated at 240*C, yielded only the presence of the SmCo5 phase. By X-ray diffraction different crystal forms were identified depending on the maximal heating temperature. The following phases were identified: Sm2O3, Co, CoO, Co3O4 and SmCoO3. According to TG and X-ray results, for each of the investigated temperatures, the corresponding chemical reactions were established. The experimental data from both the thermal and X-ray investigations confirm that the phases of pressing and aligning the SmCo5 powder, in the process of producing  sintered SmCo5 magnets, may be performed without a protective  atmosphere., Истражена је могућност коришћења вакуума на граници између ниског и високог (10-3-10-4 bar) као заштитне атмосфере у фазама синтеровања и термичке обраде SmCo5 магнета. Испитан је утицај заштитне атмосфере на структурне промене SmCo5 магнета за различите температурне и временске интервале синтеровања, а за константну температуру и у време термичке обраде. Присуство оксидних и других инклузија у било ком делу синтерованих SmCo5 узорака, осим у површинском слоју, није доказано. Сканирајућом електронском микроскопијом (СЕМ), коришћењем Texture Analysis System-a ( TAS´+) мерена је дебљина оскидне зоне. Утврђен је регресиони модел према коме дебљина оксидне зоне расте са квадратом температуре синтеровања, а линеарно са временом синтеровања, за дефинисану температуру термичке обраде.",
publisher = "ETRAN Society",
journal = "Science of Sintering",
title = "The influence of protective atmosphere on oxidation of sintered SmCo5 magnetic materials",
volume = "28",
number = "Special Issue",
pages = "179-184",
url = "https://hdl.handle.net/21.15107/rcub_cer_4165"
}

Talijan, N. M., Milutinović Nikolić, A.,& Jovanović, Ž.. (1996). The influence of protective atmosphere on oxidation of sintered SmCo5 magnetic materials. in Science of Sintering
ETRAN Society., 28(Special Issue), 179-184.
https://hdl.handle.net/21.15107/rcub_cer_4165

Talijan NM, Milutinović Nikolić A, Jovanović Ž. The influence of protective atmosphere on oxidation of sintered SmCo5 magnetic materials. in Science of Sintering. 1996;28(Special Issue):179-184.
https://hdl.handle.net/21.15107/rcub_cer_4165 .

Talijan, Nadežda M., Milutinović Nikolić, Aleksandra, Jovanović, Žarko, "The influence of protective atmosphere on oxidation of sintered SmCo5 magnetic materials" in Science of Sintering, 28, no. Special Issue (1996):179-184,
https://hdl.handle.net/21.15107/rcub_cer_4165 .

TY  - JOUR
AU  - Talijan, Nadežda M.
AU  - Milutinović Nikolić, Aleksandra
AU  - Jovanović, Žarko
PY  - 1996
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/4136
AB  - Understanding of the thermal stability of intermetallic  SmCo5 powder is essential for designing the working atmosphere in all phases of the technological procedure  in the production of sintered SmCo5 magnets to obtain maximal magnetic properties. The thermal stability of the SmCo5 powder with defined chemical composition and particle size was investigated in the interval from 20 to 900*C. It was found by thermogravimetic analysis (TGA) that up to 240*C, the oxidation of SmCo5 does not occur. X-Ray diffraction of the thermogravimetric experimental residue of the SmCo5 powder, heated at 240*C, yielded only the presence of the SmCo5 phase. By X-ray diffraction analysis different crystal forms were identified depending on the maximal heating temperature. The following phases were identified: Sm2O3, Co, CoO, Co3O4 and SmCoO3. According to TG and X-ray results, for each of the investigated temperatures, the corresponding chemical reactions were established. The experimental data from both the thermal and X-ray investigations confirm that the phases of pressing and aligning the SmCo5 powder, in the process of producing  sintered SmCo5 magnets, may be performed without a protective  atmosphere.
PB  - Belgrade : Serbian Chemical Society / Beograd : Srpsko hemijsko društvo
T2  - Journal of the Serbian Chemical Society
T1  - Oxidative processes during heat treatment in intermetallic SmCo5 powder
T1  - Oksidacioni procesi pri zagrevanju praha intermetalnog jedinjenja SmCo5
VL  - 61
IS  - 3
SP  - 189
EP  - 195
UR  - https://hdl.handle.net/21.15107/rcub_cer_4136
ER  - 

@article{
author = "Talijan, Nadežda M. and Milutinović Nikolić, Aleksandra and Jovanović, Žarko",
year = "1996",
abstract = "Understanding of the thermal stability of intermetallic  SmCo5 powder is essential for designing the working atmosphere in all phases of the technological procedure  in the production of sintered SmCo5 magnets to obtain maximal magnetic properties. The thermal stability of the SmCo5 powder with defined chemical composition and particle size was investigated in the interval from 20 to 900*C. It was found by thermogravimetic analysis (TGA) that up to 240*C, the oxidation of SmCo5 does not occur. X-Ray diffraction of the thermogravimetric experimental residue of the SmCo5 powder, heated at 240*C, yielded only the presence of the SmCo5 phase. By X-ray diffraction analysis different crystal forms were identified depending on the maximal heating temperature. The following phases were identified: Sm2O3, Co, CoO, Co3O4 and SmCoO3. According to TG and X-ray results, for each of the investigated temperatures, the corresponding chemical reactions were established. The experimental data from both the thermal and X-ray investigations confirm that the phases of pressing and aligning the SmCo5 powder, in the process of producing  sintered SmCo5 magnets, may be performed without a protective  atmosphere.",
publisher = "Belgrade : Serbian Chemical Society / Beograd : Srpsko hemijsko društvo",
journal = "Journal of the Serbian Chemical Society",
title = "Oxidative processes during heat treatment in intermetallic SmCo5 powder, Oksidacioni procesi pri zagrevanju praha intermetalnog jedinjenja SmCo5",
volume = "61",
number = "3",
pages = "189-195",
url = "https://hdl.handle.net/21.15107/rcub_cer_4136"
}

Talijan, N. M., Milutinović Nikolić, A.,& Jovanović, Ž.. (1996). Oxidative processes during heat treatment in intermetallic SmCo5 powder. in Journal of the Serbian Chemical Society
Belgrade : Serbian Chemical Society / Beograd : Srpsko hemijsko društvo., 61(3), 189-195.
https://hdl.handle.net/21.15107/rcub_cer_4136

Talijan NM, Milutinović Nikolić A, Jovanović Ž. Oxidative processes during heat treatment in intermetallic SmCo5 powder. in Journal of the Serbian Chemical Society. 1996;61(3):189-195.
https://hdl.handle.net/21.15107/rcub_cer_4136 .

Talijan, Nadežda M., Milutinović Nikolić, Aleksandra, Jovanović, Žarko, "Oxidative processes during heat treatment in intermetallic SmCo5 powder" in Journal of the Serbian Chemical Society, 61, no. 3 (1996):189-195,
https://hdl.handle.net/21.15107/rcub_cer_4136 .