TY  - GEN
AU  - Jovanović, Aleksandar
AU  - Kovačina, Jovanka
AU  - Marinković, Aleksandar D.
AU  - Onjia, Antonije E.
AU  - Povrenović, Dragan
AU  - Trišović, Tomislav
PY  - 2019
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/3941
AB  - Usled razvoja industrije i rastom populacije tokom poslednjih godina javljaju se problemi u vezi sa otpadnim vodama iz proizvodnje koje je neophodno rešavati na ekološki i ekonomičan način. Sve otpadne vode iz postrojenja bez obzira kako su nastale sadrže štetne materije koje mogu da imaju i određen stepen toksičnih primesa, moraju se prečistiti ako njihov kvalitet ne odgovara zakonskim okvirima. Svrha tretmana otpadnih voda je uklanjanje štetnih materija čime se postiže smanjenje stepena njene zagađenosti, a istovremeno se ostvaruje i određen ekonomski i ekološki efekat. Ovo tehničko rešenje predstavlja optimizaciju procesa prečišćavanje otpadnih voda Fabrike streljačke municije u Uzićima. Otpadna voda je prečišćavana postupkom taloženja uz upotrebu kalcijum-oksida u cilju uklanjanja koloidnih materija i teških metala. Većina zagađujućih materija su organskog porekla i njihovo ukljanjanje vršeno je primenom naprednih oksidacionih procesa korišćenjem ozona i ozona u kombinaciji sa ultrazvukom u cilju postizanja kvaliteta vode koji odgovara zakonskoj regulativi. Unapređeni procesi oksidacije predstavljaju najefikasnije metode za uklanjanje i degradaciju teško rastvornih zagađujućih materija iz otpadnih voda. Proces prečišćavanja je optimizovan u odnosu na tehnološki postupak, koncentraciju, vreme tretmana i količinu primenjenog oksidacionog sredstva. Stepen zagađenosti vode organskim jedinjenjima je određivati na osnovu merenja HPK, BPK i koncentracije teških metala (olovo, gvožđe, hrom, bakar, cink, aluminijum).
AB  - Due to the development of industry and population growth in recent years, there are problems related to industrial wastewater that needs to be addressed in an environmentally friendly and economical way. All wastewater from plants, regardless of how it was generated, contains harmful substances that may have a certain degree of toxic impurities and must be treated if its quality does not meet the legal requirements. The purpose of wastewater treatment is the removal of harmful substances, which reduces the degree of its pollution, and at the same time achieves a certain economic and environmental effect. This technical solution ensures the optimization of the wastewater treatment process of the Ammunition Factory in Uzići. Wastewater is purified by a precipitation process using calcium oxide to remove colloidal substances and heavy metals. Most of the pollutants are of organic origin and their removal is performed by applying advanced oxidation processes using ozone and ozone in combination with ultrasound in order to achieve water quality that complies with legal regulations. Advanced oxidation processes are the most efficient methods for removing and degrading poorly soluble pollutants from wastewater. The purification process is optimized in terms of the technological process, concentration, treatment time and the amount of oxidizing agent applied. The degree of water pollution with organic compounds is determined on the basis of measurements of HPK, BOD and the concentration of heavy metals (lead, iron, chromium, copper, zinc, aluminum).
PB  - University of Belgrade, Faculty of Technology and Metallurgy
T1  - Optimizacija procesa prečišćavanja otpadnih voda iz Fabrike streljačke municije Uzići
UR  - https://hdl.handle.net/21.15107/rcub_cer_3941
ER  - 

@misc{
author = "Jovanović, Aleksandar and Kovačina, Jovanka and Marinković, Aleksandar D. and Onjia, Antonije E. and Povrenović, Dragan and Trišović, Tomislav",
year = "2019",
abstract = "Usled razvoja industrije i rastom populacije tokom poslednjih godina javljaju se problemi u vezi sa otpadnim vodama iz proizvodnje koje je neophodno rešavati na ekološki i ekonomičan način. Sve otpadne vode iz postrojenja bez obzira kako su nastale sadrže štetne materije koje mogu da imaju i određen stepen toksičnih primesa, moraju se prečistiti ako njihov kvalitet ne odgovara zakonskim okvirima. Svrha tretmana otpadnih voda je uklanjanje štetnih materija čime se postiže smanjenje stepena njene zagađenosti, a istovremeno se ostvaruje i određen ekonomski i ekološki efekat. Ovo tehničko rešenje predstavlja optimizaciju procesa prečišćavanje otpadnih voda Fabrike streljačke municije u Uzićima. Otpadna voda je prečišćavana postupkom taloženja uz upotrebu kalcijum-oksida u cilju uklanjanja koloidnih materija i teških metala. Većina zagađujućih materija su organskog porekla i njihovo ukljanjanje vršeno je primenom naprednih oksidacionih procesa korišćenjem ozona i ozona u kombinaciji sa ultrazvukom u cilju postizanja kvaliteta vode koji odgovara zakonskoj regulativi. Unapređeni procesi oksidacije predstavljaju najefikasnije metode za uklanjanje i degradaciju teško rastvornih zagađujućih materija iz otpadnih voda. Proces prečišćavanja je optimizovan u odnosu na tehnološki postupak, koncentraciju, vreme tretmana i količinu primenjenog oksidacionog sredstva. Stepen zagađenosti vode organskim jedinjenjima je određivati na osnovu merenja HPK, BPK i koncentracije teških metala (olovo, gvožđe, hrom, bakar, cink, aluminijum)., Due to the development of industry and population growth in recent years, there are problems related to industrial wastewater that needs to be addressed in an environmentally friendly and economical way. All wastewater from plants, regardless of how it was generated, contains harmful substances that may have a certain degree of toxic impurities and must be treated if its quality does not meet the legal requirements. The purpose of wastewater treatment is the removal of harmful substances, which reduces the degree of its pollution, and at the same time achieves a certain economic and environmental effect. This technical solution ensures the optimization of the wastewater treatment process of the Ammunition Factory in Uzići. Wastewater is purified by a precipitation process using calcium oxide to remove colloidal substances and heavy metals. Most of the pollutants are of organic origin and their removal is performed by applying advanced oxidation processes using ozone and ozone in combination with ultrasound in order to achieve water quality that complies with legal regulations. Advanced oxidation processes are the most efficient methods for removing and degrading poorly soluble pollutants from wastewater. The purification process is optimized in terms of the technological process, concentration, treatment time and the amount of oxidizing agent applied. The degree of water pollution with organic compounds is determined on the basis of measurements of HPK, BOD and the concentration of heavy metals (lead, iron, chromium, copper, zinc, aluminum).",
publisher = "University of Belgrade, Faculty of Technology and Metallurgy",
title = "Optimizacija procesa prečišćavanja otpadnih voda iz Fabrike streljačke municije Uzići",
url = "https://hdl.handle.net/21.15107/rcub_cer_3941"
}

Jovanović, A., Kovačina, J., Marinković, A. D., Onjia, A. E., Povrenović, D.,& Trišović, T.. (2019). Optimizacija procesa prečišćavanja otpadnih voda iz Fabrike streljačke municije Uzići. 
University of Belgrade, Faculty of Technology and Metallurgy..
https://hdl.handle.net/21.15107/rcub_cer_3941

Jovanović A, Kovačina J, Marinković AD, Onjia AE, Povrenović D, Trišović T. Optimizacija procesa prečišćavanja otpadnih voda iz Fabrike streljačke municije Uzići. 2019;.
https://hdl.handle.net/21.15107/rcub_cer_3941 .

Jovanović, Aleksandar, Kovačina, Jovanka, Marinković, Aleksandar D., Onjia, Antonije E., Povrenović, Dragan, Trišović, Tomislav, "Optimizacija procesa prečišćavanja otpadnih voda iz Fabrike streljačke municije Uzići" (2019),
https://hdl.handle.net/21.15107/rcub_cer_3941 .

TY  - JOUR
AU  - Jokić, Bojan
AU  - Džunuzović, Enis S.
AU  - Grgur, Branimir N.
AU  - Jugović, Branimir
AU  - Trišović, Tomislav
AU  - Stevanović, Jasmina
AU  - Gvozdenović, Milica M.
PY  - 2017
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/2173
AB  - Poly(aniline-co-(m-aminobenzoic acid)) was synthesized electrochemically at graphite electrode under galvanostatic conditions. Aqueous electrolyte for synthesis was consisted of HCl and different amount of aniline and m-aminobenzoic acid. The presence of the meta positioned carboxylic group in m-aminobenzoic acid influenced higher co-polymerization potential, different morphology and electrochemical behavior of copolymers compared to polyaniline. Electrochemical activity is achieved by proton exchange in neutral environment that can result in a faster charge/discharge process, which is in the case of PANI limited by slow anion exchange, making this material promising for consideration in super-capacitors and in biological system.
PB  - Springer, Dordrecht
T2  - Journal of Polymer Research
T1  - The influence of m-aminobenzoic acid on electrochemical synthesis and behavior of poly(aniline-co-(m-aminobenzoic acid)
VL  - 24
IS  - 9
DO  - 10.1007/s10965-017-1313-5
ER  - 

@article{
author = "Jokić, Bojan and Džunuzović, Enis S. and Grgur, Branimir N. and Jugović, Branimir and Trišović, Tomislav and Stevanović, Jasmina and Gvozdenović, Milica M.",
year = "2017",
abstract = "Poly(aniline-co-(m-aminobenzoic acid)) was synthesized electrochemically at graphite electrode under galvanostatic conditions. Aqueous electrolyte for synthesis was consisted of HCl and different amount of aniline and m-aminobenzoic acid. The presence of the meta positioned carboxylic group in m-aminobenzoic acid influenced higher co-polymerization potential, different morphology and electrochemical behavior of copolymers compared to polyaniline. Electrochemical activity is achieved by proton exchange in neutral environment that can result in a faster charge/discharge process, which is in the case of PANI limited by slow anion exchange, making this material promising for consideration in super-capacitors and in biological system.",
publisher = "Springer, Dordrecht",
journal = "Journal of Polymer Research",
title = "The influence of m-aminobenzoic acid on electrochemical synthesis and behavior of poly(aniline-co-(m-aminobenzoic acid)",
volume = "24",
number = "9",
doi = "10.1007/s10965-017-1313-5"
}

Jokić, B., Džunuzović, E. S., Grgur, B. N., Jugović, B., Trišović, T., Stevanović, J.,& Gvozdenović, M. M.. (2017). The influence of m-aminobenzoic acid on electrochemical synthesis and behavior of poly(aniline-co-(m-aminobenzoic acid). in Journal of Polymer Research
Springer, Dordrecht., 24(9).
https://doi.org/10.1007/s10965-017-1313-5

Jokić B, Džunuzović ES, Grgur BN, Jugović B, Trišović T, Stevanović J, Gvozdenović MM. The influence of m-aminobenzoic acid on electrochemical synthesis and behavior of poly(aniline-co-(m-aminobenzoic acid). in Journal of Polymer Research. 2017;24(9).
doi:10.1007/s10965-017-1313-5 .

Jokić, Bojan, Džunuzović, Enis S., Grgur, Branimir N., Jugović, Branimir, Trišović, Tomislav, Stevanović, Jasmina, Gvozdenović, Milica M., "The influence of m-aminobenzoic acid on electrochemical synthesis and behavior of poly(aniline-co-(m-aminobenzoic acid)" in Journal of Polymer Research, 24, no. 9 (2017),
https://doi.org/10.1007/s10965-017-1313-5 . .

TY  - CONF
AU  - Gvozdenović, Milica M.
AU  - Popović, N.
AU  - Stevanović, Jasmina
AU  - Grgur, Branimir N.
AU  - Trišović, Tomislav
AU  - Jugović, Branimir
PY  - 2014
UR  - http://dais.sanu.ac.rs/123456789/587
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/2621
AB  - Electroconducting polymers are promising materials to be used in various fields including: batteries, capacitors, electronic devices, corrosion, biosensors and sensors[1,6]. Polyaniline is probably the most investigated electroconducting polymer, due to low cost monomer, conductivity, environmental stability. Polyaniline can be obtained by chemical or electrochemical oxidative polymerization of aniline. Electrochemical synthesis is performed in anodic process directly from acidic aqueous electrolyte containing aniline. Polyaniline can be used as electrode material for electrochemical determination of ascorbic acid based on electrocatalytic oxidation of ascorbic acid.
PB  - Tatranské Matliare : Slovak Society of Chemical Engineering
C3  - Proceedings of the 41st International Conference of Slovak Society of Chemical Engineering
T1  - Electrochemical determination of ascorbic acid using electrochemically deposited polyaniline
SP  - 654
EP  - 657
UR  - https://hdl.handle.net/21.15107/rcub_dais_587
ER  - 

@conference{
author = "Gvozdenović, Milica M. and Popović, N. and Stevanović, Jasmina and Grgur, Branimir N. and Trišović, Tomislav and Jugović, Branimir",
year = "2014",
abstract = "Electroconducting polymers are promising materials to be used in various fields including: batteries, capacitors, electronic devices, corrosion, biosensors and sensors[1,6]. Polyaniline is probably the most investigated electroconducting polymer, due to low cost monomer, conductivity, environmental stability. Polyaniline can be obtained by chemical or electrochemical oxidative polymerization of aniline. Electrochemical synthesis is performed in anodic process directly from acidic aqueous electrolyte containing aniline. Polyaniline can be used as electrode material for electrochemical determination of ascorbic acid based on electrocatalytic oxidation of ascorbic acid.",
publisher = "Tatranské Matliare : Slovak Society of Chemical Engineering",
journal = "Proceedings of the 41st International Conference of Slovak Society of Chemical Engineering",
title = "Electrochemical determination of ascorbic acid using electrochemically deposited polyaniline",
pages = "654-657",
url = "https://hdl.handle.net/21.15107/rcub_dais_587"
}

Gvozdenović, M. M., Popović, N., Stevanović, J., Grgur, B. N., Trišović, T.,& Jugović, B.. (2014). Electrochemical determination of ascorbic acid using electrochemically deposited polyaniline. in Proceedings of the 41st International Conference of Slovak Society of Chemical Engineering
Tatranské Matliare : Slovak Society of Chemical Engineering., 654-657.
https://hdl.handle.net/21.15107/rcub_dais_587

Gvozdenović MM, Popović N, Stevanović J, Grgur BN, Trišović T, Jugović B. Electrochemical determination of ascorbic acid using electrochemically deposited polyaniline. in Proceedings of the 41st International Conference of Slovak Society of Chemical Engineering. 2014;:654-657.
https://hdl.handle.net/21.15107/rcub_dais_587 .

Gvozdenović, Milica M., Popović, N., Stevanović, Jasmina, Grgur, Branimir N., Trišović, Tomislav, Jugović, Branimir, "Electrochemical determination of ascorbic acid using electrochemically deposited polyaniline" in Proceedings of the 41st International Conference of Slovak Society of Chemical Engineering (2014):654-657,
https://hdl.handle.net/21.15107/rcub_dais_587 .

TY  - CONF
AU  - Gvozdenović, Milica M.
AU  - Jugović, Branimir
AU  - Jambrec, Daliborka
AU  - Grgur, Branimir N.
AU  - Trišović, Tomislav
AU  - Stevanović, Jasmina
PY  - 2012
UR  - http://dais.sanu.ac.rs/123456789/492
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/2597
AB  - Polyaniline (PANI) was electrochemically synthesized on graphite electrode galvanostaticaly from aqueous solution of 0.25 mol dm-3 aniline and 0.5 mol dm-3 p-toluenesulfonic acid. Charge capacity available for the exchange and the total theoretical weight of polyaniline polymerized on graphite electrode was determined. Characterization polianiline electrode was performed by cyclic voltametry in 0.5 mol dm-3 HCl. Based on the PANI electrodes behavior during the cyclization, was tested the possibility of practical application of polyaniline doped p-toluenesulfonic acid as the anode material of secondary electrochemical power sources.
PB  - Tatranské Matliare : Slovak Society of Chemical Engineering
C3  - Proceedings of the 39th International Conference of Slovak Society of Chemical Engineering
T1  - The influence of current density on charge/discharge characteristics of polyaniline electrode
SP  - 1467
EP  - 1471
UR  - https://hdl.handle.net/21.15107/rcub_dais_492
ER  - 

@conference{
author = "Gvozdenović, Milica M. and Jugović, Branimir and Jambrec, Daliborka and Grgur, Branimir N. and Trišović, Tomislav and Stevanović, Jasmina",
year = "2012",
abstract = "Polyaniline (PANI) was electrochemically synthesized on graphite electrode galvanostaticaly from aqueous solution of 0.25 mol dm-3 aniline and 0.5 mol dm-3 p-toluenesulfonic acid. Charge capacity available for the exchange and the total theoretical weight of polyaniline polymerized on graphite electrode was determined. Characterization polianiline electrode was performed by cyclic voltametry in 0.5 mol dm-3 HCl. Based on the PANI electrodes behavior during the cyclization, was tested the possibility of practical application of polyaniline doped p-toluenesulfonic acid as the anode material of secondary electrochemical power sources.",
publisher = "Tatranské Matliare : Slovak Society of Chemical Engineering",
journal = "Proceedings of the 39th International Conference of Slovak Society of Chemical Engineering",
title = "The influence of current density on charge/discharge characteristics of polyaniline electrode",
pages = "1467-1471",
url = "https://hdl.handle.net/21.15107/rcub_dais_492"
}

Gvozdenović, M. M., Jugović, B., Jambrec, D., Grgur, B. N., Trišović, T.,& Stevanović, J.. (2012). The influence of current density on charge/discharge characteristics of polyaniline electrode. in Proceedings of the 39th International Conference of Slovak Society of Chemical Engineering
Tatranské Matliare : Slovak Society of Chemical Engineering., 1467-1471.
https://hdl.handle.net/21.15107/rcub_dais_492

Gvozdenović MM, Jugović B, Jambrec D, Grgur BN, Trišović T, Stevanović J. The influence of current density on charge/discharge characteristics of polyaniline electrode. in Proceedings of the 39th International Conference of Slovak Society of Chemical Engineering. 2012;:1467-1471.
https://hdl.handle.net/21.15107/rcub_dais_492 .

Gvozdenović, Milica M., Jugović, Branimir, Jambrec, Daliborka, Grgur, Branimir N., Trišović, Tomislav, Stevanović, Jasmina, "The influence of current density on charge/discharge characteristics of polyaniline electrode" in Proceedings of the 39th International Conference of Slovak Society of Chemical Engineering (2012):1467-1471,
https://hdl.handle.net/21.15107/rcub_dais_492 .

TY  - JOUR
AU  - Gvozdenović, Milica M.
AU  - Jugović, Branimir
AU  - Trišović, Tomislav
AU  - Stevanović, Jasmina
AU  - Plazinić, Milan
AU  - Grgur, Branimir N.
PY  - 2012
UR  - http://dais.sanu.ac.rs/123456789/468
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/2847
AB  - Polyaniline (PANI) anode, electrochemically formed on graphite from aniline containing sulfuric acid solution, and electrochemically formed thin film lead dioxide cathode, were investigated for possible applications as electrode materials in PANI/H2SO4/PbO2 aqueous based rechargeable power sources. The stimulation of charge/discharge characteristics of the cell, based on half cell reactions investigations, was evaluated. Charging of the cell would occur in the voltage range of 1.20 and 1.70 V, while discharge is expected in the voltage range of 1.35 and 1.00 V.
PB  - Hunedoara : University Politehnica Timisoara,  Faculty of Engineering Hunedoara
T2  - Annals of the Faculty of Engineering Hunedoara: International Journal of Engineering
T1  - Electrochemical characteristics of polyaniline/lead-dioxide power source
VL  - 10
IS  - 3
SP  - 445
EP  - 448
UR  - https://hdl.handle.net/21.15107/rcub_dais_468
ER  - 

@article{
author = "Gvozdenović, Milica M. and Jugović, Branimir and Trišović, Tomislav and Stevanović, Jasmina and Plazinić, Milan and Grgur, Branimir N.",
year = "2012",
abstract = "Polyaniline (PANI) anode, electrochemically formed on graphite from aniline containing sulfuric acid solution, and electrochemically formed thin film lead dioxide cathode, were investigated for possible applications as electrode materials in PANI/H2SO4/PbO2 aqueous based rechargeable power sources. The stimulation of charge/discharge characteristics of the cell, based on half cell reactions investigations, was evaluated. Charging of the cell would occur in the voltage range of 1.20 and 1.70 V, while discharge is expected in the voltage range of 1.35 and 1.00 V.",
publisher = "Hunedoara : University Politehnica Timisoara,  Faculty of Engineering Hunedoara",
journal = "Annals of the Faculty of Engineering Hunedoara: International Journal of Engineering",
title = "Electrochemical characteristics of polyaniline/lead-dioxide power source",
volume = "10",
number = "3",
pages = "445-448",
url = "https://hdl.handle.net/21.15107/rcub_dais_468"
}

Gvozdenović, M. M., Jugović, B., Trišović, T., Stevanović, J., Plazinić, M.,& Grgur, B. N.. (2012). Electrochemical characteristics of polyaniline/lead-dioxide power source. in Annals of the Faculty of Engineering Hunedoara: International Journal of Engineering
Hunedoara : University Politehnica Timisoara,  Faculty of Engineering Hunedoara., 10(3), 445-448.
https://hdl.handle.net/21.15107/rcub_dais_468

Gvozdenović MM, Jugović B, Trišović T, Stevanović J, Plazinić M, Grgur BN. Electrochemical characteristics of polyaniline/lead-dioxide power source. in Annals of the Faculty of Engineering Hunedoara: International Journal of Engineering. 2012;10(3):445-448.
https://hdl.handle.net/21.15107/rcub_dais_468 .

Gvozdenović, Milica M., Jugović, Branimir, Trišović, Tomislav, Stevanović, Jasmina, Plazinić, Milan, Grgur, Branimir N., "Electrochemical characteristics of polyaniline/lead-dioxide power source" in Annals of the Faculty of Engineering Hunedoara: International Journal of Engineering, 10, no. 3 (2012):445-448,
https://hdl.handle.net/21.15107/rcub_dais_468 .

TY  - CONF
AU  - Gvozdenović, Milica M.
AU  - Jugović, Branimir
AU  - Jambrec, Daliborka
AU  - Grgur, Branimir N.
AU  - Trišović, Tomislav
AU  - Stevanović, Jasmina
PY  - 2012
UR  - http://dais.sanu.ac.rs/123456789/141
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/3150
AB  - Poster presented at the 39th International Conference of Slovak Society of Chemical Engineering, Tatranske Matliare, Slovakia, May 21–25, 2012
T1  - The influence of current density on charge/discharge characteristics of polyaniline electrode
UR  - https://hdl.handle.net/21.15107/rcub_dais_492
ER  - 

@conference{
author = "Gvozdenović, Milica M. and Jugović, Branimir and Jambrec, Daliborka and Grgur, Branimir N. and Trišović, Tomislav and Stevanović, Jasmina",
year = "2012",
abstract = "Poster presented at the 39th International Conference of Slovak Society of Chemical Engineering, Tatranske Matliare, Slovakia, May 21–25, 2012",
title = "The influence of current density on charge/discharge characteristics of polyaniline electrode",
url = "https://hdl.handle.net/21.15107/rcub_dais_492"
}

Gvozdenović, M. M., Jugović, B., Jambrec, D., Grgur, B. N., Trišović, T.,& Stevanović, J.. (2012). The influence of current density on charge/discharge characteristics of polyaniline electrode. .
https://hdl.handle.net/21.15107/rcub_dais_492

Gvozdenović MM, Jugović B, Jambrec D, Grgur BN, Trišović T, Stevanović J. The influence of current density on charge/discharge characteristics of polyaniline electrode. 2012;.
https://hdl.handle.net/21.15107/rcub_dais_492 .

Gvozdenović, Milica M., Jugović, Branimir, Jambrec, Daliborka, Grgur, Branimir N., Trišović, Tomislav, Stevanović, Jasmina, "The influence of current density on charge/discharge characteristics of polyaniline electrode" (2012),
https://hdl.handle.net/21.15107/rcub_dais_492 .

TY  - CONF
AU  - Trišović, Tomislav
AU  - Jugović, Branimir
AU  - Gvozdenović, Milica M.
AU  - Stevanović, Jasmina
AU  - Grgur, Branimir N.
PY  - 2011
UR  - http://dais.sanu.ac.rs/123456789/546
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/3149
AB  - Paper published in 43rd International October Conference on Mining and Metallurgy - IOC 2011, October 12-15, 2011, Kladovo, Serbia: Proceedings, Bor : Technical Faculty, 2011.
PB  - Bor : Technical Faculty
C3  - 43rd International October Conference on Mining and Metallurgy - IOC 2011, October 12-15, 2011, Kladovo, Serbia: Proceedings
T1  - Electrochemical Water Treatment Devices
SP  - 259
EP  - 262
UR  - https://hdl.handle.net/21.15107/rcub_dais_546
ER  - 

@conference{
author = "Trišović, Tomislav and Jugović, Branimir and Gvozdenović, Milica M. and Stevanović, Jasmina and Grgur, Branimir N.",
year = "2011",
abstract = "Paper published in 43rd International October Conference on Mining and Metallurgy - IOC 2011, October 12-15, 2011, Kladovo, Serbia: Proceedings, Bor : Technical Faculty, 2011.",
publisher = "Bor : Technical Faculty",
journal = "43rd International October Conference on Mining and Metallurgy - IOC 2011, October 12-15, 2011, Kladovo, Serbia: Proceedings",
title = "Electrochemical Water Treatment Devices",
pages = "259-262",
url = "https://hdl.handle.net/21.15107/rcub_dais_546"
}

Trišović, T., Jugović, B., Gvozdenović, M. M., Stevanović, J.,& Grgur, B. N.. (2011). Electrochemical Water Treatment Devices. in 43rd International October Conference on Mining and Metallurgy - IOC 2011, October 12-15, 2011, Kladovo, Serbia: Proceedings
Bor : Technical Faculty., 259-262.
https://hdl.handle.net/21.15107/rcub_dais_546

Trišović T, Jugović B, Gvozdenović MM, Stevanović J, Grgur BN. Electrochemical Water Treatment Devices. in 43rd International October Conference on Mining and Metallurgy - IOC 2011, October 12-15, 2011, Kladovo, Serbia: Proceedings. 2011;:259-262.
https://hdl.handle.net/21.15107/rcub_dais_546 .

Trišović, Tomislav, Jugović, Branimir, Gvozdenović, Milica M., Stevanović, Jasmina, Grgur, Branimir N., "Electrochemical Water Treatment Devices" in 43rd International October Conference on Mining and Metallurgy - IOC 2011, October 12-15, 2011, Kladovo, Serbia: Proceedings (2011):259-262,
https://hdl.handle.net/21.15107/rcub_dais_546 .

TY  - JOUR
AU  - Gvozdenović, Milica M.
AU  - Jugović, Branimir
AU  - Stevanović, Jasmina
AU  - Grgur, Branimir N.
AU  - Trišović, Tomislav
AU  - Jugovic, Zvonimir S.
PY  - 2011
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/806
AB  - Electrochemical polymerization of polyaniline (PANI) coating on copper electrode was performed galvanostatically in the current density range between 0.50 and 1.25 mA cm(-2), from aqueous solution of 0.3 mol dm(-3) sodium benzoate and 0.2 mol dm(-3) aniline. The corrosion behavior of PANI coated copper and copper electrode exposed to 0.5 mol dm(-3) sodium chloride solution was investigated by potentiodynamic and electrochemical impedance spectroscopy techniques. It was observed that thin PANI (5 mu m) coating had provided efficient protection (similar to 96%) to copper in 0.5 mol dm(-3) sodium chloride solution. Unusual initial impedance behavior to that normally observed with conventional organic coatings was attributed to dedoping of benzoate anions from the polymer coating.
PB  - Elsevier Science Sa, Lausanne
T2  - Synthetic Metals
T1  - Electrochemical synthesis and corrosion behavior of polyaniline-benzoate coating on copper
VL  - 161
IS  - 13-14
SP  - 1313
EP  - 1318
DO  - 10.1016/j.synthmet.2011.04.029
ER  - 

@article{
author = "Gvozdenović, Milica M. and Jugović, Branimir and Stevanović, Jasmina and Grgur, Branimir N. and Trišović, Tomislav and Jugovic, Zvonimir S.",
year = "2011",
abstract = "Electrochemical polymerization of polyaniline (PANI) coating on copper electrode was performed galvanostatically in the current density range between 0.50 and 1.25 mA cm(-2), from aqueous solution of 0.3 mol dm(-3) sodium benzoate and 0.2 mol dm(-3) aniline. The corrosion behavior of PANI coated copper and copper electrode exposed to 0.5 mol dm(-3) sodium chloride solution was investigated by potentiodynamic and electrochemical impedance spectroscopy techniques. It was observed that thin PANI (5 mu m) coating had provided efficient protection (similar to 96%) to copper in 0.5 mol dm(-3) sodium chloride solution. Unusual initial impedance behavior to that normally observed with conventional organic coatings was attributed to dedoping of benzoate anions from the polymer coating.",
publisher = "Elsevier Science Sa, Lausanne",
journal = "Synthetic Metals",
title = "Electrochemical synthesis and corrosion behavior of polyaniline-benzoate coating on copper",
volume = "161",
number = "13-14",
pages = "1313-1318",
doi = "10.1016/j.synthmet.2011.04.029"
}

Gvozdenović, M. M., Jugović, B., Stevanović, J., Grgur, B. N., Trišović, T.,& Jugovic, Z. S.. (2011). Electrochemical synthesis and corrosion behavior of polyaniline-benzoate coating on copper. in Synthetic Metals
Elsevier Science Sa, Lausanne., 161(13-14), 1313-1318.
https://doi.org/10.1016/j.synthmet.2011.04.029

Gvozdenović MM, Jugović B, Stevanović J, Grgur BN, Trišović T, Jugovic ZS. Electrochemical synthesis and corrosion behavior of polyaniline-benzoate coating on copper. in Synthetic Metals. 2011;161(13-14):1313-1318.
doi:10.1016/j.synthmet.2011.04.029 .

Gvozdenović, Milica M., Jugović, Branimir, Stevanović, Jasmina, Grgur, Branimir N., Trišović, Tomislav, Jugovic, Zvonimir S., "Electrochemical synthesis and corrosion behavior of polyaniline-benzoate coating on copper" in Synthetic Metals, 161, no. 13-14 (2011):1313-1318,
https://doi.org/10.1016/j.synthmet.2011.04.029 . .

TY  - JOUR
AU  - Gvozdenović, Milica M.
AU  - Jugović, Branimir
AU  - Trišović, Tomislav
AU  - Stevanović, Jasmina
AU  - Grgur, Branimir N.
PY  - 2011
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/939
AB  - Polyaniline electrode (PANI) was formed electrochemically at graphite electrode. Electrochemical polymerization was performed at constant current density of 2.0 mA cm-2 from aqueous solution of 1.0 mol dm -3 HCl with addition of 0.25 mol dm-3 aniline monomer. Electrochemical characterization of the PANI electrode in chloride and chloride/citrate electrolyte was performed using cyclic voltammetry and galvanostatic measurement in order to study the influence of citrate ions on charge/discharge capability and cycling efficiency. It was observed that, for anodic potential 0.32 V, higher electrode capacity of PANI electrode in chloride/citrate electrolyte was obtained, comparing to chloride electrolyte, indicating positive effect of citrate ions on cycling characteristics. On the other hand, for higher anodic potential limit of 0.50 V, faster decrease of the electrode capacity in chloride/citrate electrolyte was observed. It was suggested that influence of both chloride and citrate anions had exhibited influence on electrochemical behavior of PANI electrode in citrate containing electrolyte.
T2  - Materials Chemistry and Physics
T1  - Electrochemical characterization of polyaniline electrode in ammonium citrate containing electrolyte
VL  - 125
IS  - 3
SP  - 601
EP  - 605
DO  - 10.1016/j.matchemphys.2010.10.011
ER  - 

@article{
author = "Gvozdenović, Milica M. and Jugović, Branimir and Trišović, Tomislav and Stevanović, Jasmina and Grgur, Branimir N.",
year = "2011",
abstract = "Polyaniline electrode (PANI) was formed electrochemically at graphite electrode. Electrochemical polymerization was performed at constant current density of 2.0 mA cm-2 from aqueous solution of 1.0 mol dm -3 HCl with addition of 0.25 mol dm-3 aniline monomer. Electrochemical characterization of the PANI electrode in chloride and chloride/citrate electrolyte was performed using cyclic voltammetry and galvanostatic measurement in order to study the influence of citrate ions on charge/discharge capability and cycling efficiency. It was observed that, for anodic potential 0.32 V, higher electrode capacity of PANI electrode in chloride/citrate electrolyte was obtained, comparing to chloride electrolyte, indicating positive effect of citrate ions on cycling characteristics. On the other hand, for higher anodic potential limit of 0.50 V, faster decrease of the electrode capacity in chloride/citrate electrolyte was observed. It was suggested that influence of both chloride and citrate anions had exhibited influence on electrochemical behavior of PANI electrode in citrate containing electrolyte.",
journal = "Materials Chemistry and Physics",
title = "Electrochemical characterization of polyaniline electrode in ammonium citrate containing electrolyte",
volume = "125",
number = "3",
pages = "601-605",
doi = "10.1016/j.matchemphys.2010.10.011"
}

Gvozdenović, M. M., Jugović, B., Trišović, T., Stevanović, J.,& Grgur, B. N.. (2011). Electrochemical characterization of polyaniline electrode in ammonium citrate containing electrolyte. in Materials Chemistry and Physics, 125(3), 601-605.
https://doi.org/10.1016/j.matchemphys.2010.10.011

Gvozdenović MM, Jugović B, Trišović T, Stevanović J, Grgur BN. Electrochemical characterization of polyaniline electrode in ammonium citrate containing electrolyte. in Materials Chemistry and Physics. 2011;125(3):601-605.
doi:10.1016/j.matchemphys.2010.10.011 .

Gvozdenović, Milica M., Jugović, Branimir, Trišović, Tomislav, Stevanović, Jasmina, Grgur, Branimir N., "Electrochemical characterization of polyaniline electrode in ammonium citrate containing electrolyte" in Materials Chemistry and Physics, 125, no. 3 (2011):601-605,
https://doi.org/10.1016/j.matchemphys.2010.10.011 . .

TY  - CONF
AU  - Jugović, Branimir
AU  - Gvozdenović, Milica M.
AU  - Trišović, Tomislav
AU  - Stevanović, Jasmina
AU  - Grgur, Branimir N.
PY  - 2011
UR  - http://dais.sanu.ac.rs/123456789/548
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/2616
AB  - Polyaniline electrode, was obtained by electrochemical polymerization at constant current density of 2.0 mA cm-2 from aqueous solution of 1.0 mol dm-3 HCl containing 0.25 mol dm-3 aniline. Electrochemical characterization of the polyaniline electrode in chloride and chloride/citrate electrolyte, for different anodic potential limits, was performed using cyclic voltammetry and galvanostatic measurements. It was observed that for anodic potential 0.32 V, higher electrode capacity in chloride/citrate was obtained. For anodic potential limit of 0.50 V, faster decrease of theelectrode capacity in chloride/citrate electrolyte was also observed. It was suggested that influence of both chloride and citrate anions has to be taken into account.
PB  - Tatranské Matliare : Slovak Society of Chemical Engineering
C3  - Proceedings of the 38th International Conference of Slovak Society of Chemical Engineering
T1  - Electrochemical behavior of polyaniline in chloride/citrate electrolyte
SP  - 963
EP  - 967
UR  - https://hdl.handle.net/21.15107/rcub_dais_548
ER  - 

@conference{
author = "Jugović, Branimir and Gvozdenović, Milica M. and Trišović, Tomislav and Stevanović, Jasmina and Grgur, Branimir N.",
year = "2011",
abstract = "Polyaniline electrode, was obtained by electrochemical polymerization at constant current density of 2.0 mA cm-2 from aqueous solution of 1.0 mol dm-3 HCl containing 0.25 mol dm-3 aniline. Electrochemical characterization of the polyaniline electrode in chloride and chloride/citrate electrolyte, for different anodic potential limits, was performed using cyclic voltammetry and galvanostatic measurements. It was observed that for anodic potential 0.32 V, higher electrode capacity in chloride/citrate was obtained. For anodic potential limit of 0.50 V, faster decrease of theelectrode capacity in chloride/citrate electrolyte was also observed. It was suggested that influence of both chloride and citrate anions has to be taken into account.",
publisher = "Tatranské Matliare : Slovak Society of Chemical Engineering",
journal = "Proceedings of the 38th International Conference of Slovak Society of Chemical Engineering",
title = "Electrochemical behavior of polyaniline in chloride/citrate electrolyte",
pages = "963-967",
url = "https://hdl.handle.net/21.15107/rcub_dais_548"
}

Jugović, B., Gvozdenović, M. M., Trišović, T., Stevanović, J.,& Grgur, B. N.. (2011). Electrochemical behavior of polyaniline in chloride/citrate electrolyte. in Proceedings of the 38th International Conference of Slovak Society of Chemical Engineering
Tatranské Matliare : Slovak Society of Chemical Engineering., 963-967.
https://hdl.handle.net/21.15107/rcub_dais_548

Jugović B, Gvozdenović MM, Trišović T, Stevanović J, Grgur BN. Electrochemical behavior of polyaniline in chloride/citrate electrolyte. in Proceedings of the 38th International Conference of Slovak Society of Chemical Engineering. 2011;:963-967.
https://hdl.handle.net/21.15107/rcub_dais_548 .

Jugović, Branimir, Gvozdenović, Milica M., Trišović, Tomislav, Stevanović, Jasmina, Grgur, Branimir N., "Electrochemical behavior of polyaniline in chloride/citrate electrolyte" in Proceedings of the 38th International Conference of Slovak Society of Chemical Engineering (2011):963-967,
https://hdl.handle.net/21.15107/rcub_dais_548 .

TY  - CHAP
AU  - Gvozdenović, Milica M.
AU  - Jugović, Branimir
AU  - Stevanović, Jasmina
AU  - Trišović, Tomislav
AU  - Grgur, Branimir N.
PY  - 2011
UR  - http://dais.sanu.ac.rs/123456789/254
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/3147
AB  - In recent years, great focus has been placed upon polymer thin films. These polymer thin films are important in many technological applications, ranging from coatings and adhesives to organic electronic devices, including sensors and detectors. Electrochemical polymerization is preferable, especially if the polymeric product is intended for use as polymer thin films, because electrogeneration allows fine control over the film thickness, an important parameter for fabrication of devices. Moreover, it was demonstrated that it is possible to modify the material properties by parameter control of the electrodeposition process. Electrochemistry is an excellent tool, not only for synthesis, but also for characterization and application of various types of materials. This book provides a timely overview of a current state of knowledge regarding the use of electropolymerization for new materials preparation, including conducting polymers and various possibilities of applications.
PB  - Rijeka: InTech
T2  - Electropolymerization
T1  - Electrochemical Polymerization of Aniline
SP  - 77
EP  - 96
DO  - 10.5772/28293
ER  - 

@inbook{
author = "Gvozdenović, Milica M. and Jugović, Branimir and Stevanović, Jasmina and Trišović, Tomislav and Grgur, Branimir N.",
year = "2011",
abstract = "In recent years, great focus has been placed upon polymer thin films. These polymer thin films are important in many technological applications, ranging from coatings and adhesives to organic electronic devices, including sensors and detectors. Electrochemical polymerization is preferable, especially if the polymeric product is intended for use as polymer thin films, because electrogeneration allows fine control over the film thickness, an important parameter for fabrication of devices. Moreover, it was demonstrated that it is possible to modify the material properties by parameter control of the electrodeposition process. Electrochemistry is an excellent tool, not only for synthesis, but also for characterization and application of various types of materials. This book provides a timely overview of a current state of knowledge regarding the use of electropolymerization for new materials preparation, including conducting polymers and various possibilities of applications.",
publisher = "Rijeka: InTech",
journal = "Electropolymerization",
booktitle = "Electrochemical Polymerization of Aniline",
pages = "77-96",
doi = "10.5772/28293"
}

Gvozdenović, M. M., Jugović, B., Stevanović, J., Trišović, T.,& Grgur, B. N.. (2011). Electrochemical Polymerization of Aniline. in Electropolymerization
Rijeka: InTech., 77-96.
https://doi.org/10.5772/28293

Gvozdenović MM, Jugović B, Stevanović J, Trišović T, Grgur BN. Electrochemical Polymerization of Aniline. in Electropolymerization. 2011;:77-96.
doi:10.5772/28293 .

Gvozdenović, Milica M., Jugović, Branimir, Stevanović, Jasmina, Trišović, Tomislav, Grgur, Branimir N., "Electrochemical Polymerization of Aniline" in Electropolymerization (2011):77-96,
https://doi.org/10.5772/28293 . .

TY  - CONF
AU  - Gvozdenović, Milica M.
AU  - Jugović, Branimir
AU  - Stevanović, Jasmina
AU  - Trišović, Tomislav
AU  - Grgur, Branimir N.
PY  - 2011
UR  - http://dais.sanu.ac.rs/123456789/547
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/3148
AB  - Paper published in 43rd International October Conference on Mining and Metallurgy - IOC 2011, October 12-15, 2011, Kladovo, Serbia: Proceedings, Bor : Technical Faculty, 2011.
PB  - Bor: Technical Faculty
C3  - 43rd International October Conference on Mining and Metallurgy - IOC 2011, October 12-15, 2011, Kladovo, Serbia: Proceedings
T1  - Electrochemical Polymerization of Protective Polyaniline Coating on Copper
SP  - 87
EP  - 90
UR  - https://hdl.handle.net/21.15107/rcub_dais_547
ER  - 

@conference{
author = "Gvozdenović, Milica M. and Jugović, Branimir and Stevanović, Jasmina and Trišović, Tomislav and Grgur, Branimir N.",
year = "2011",
abstract = "Paper published in 43rd International October Conference on Mining and Metallurgy - IOC 2011, October 12-15, 2011, Kladovo, Serbia: Proceedings, Bor : Technical Faculty, 2011.",
publisher = "Bor: Technical Faculty",
journal = "43rd International October Conference on Mining and Metallurgy - IOC 2011, October 12-15, 2011, Kladovo, Serbia: Proceedings",
title = "Electrochemical Polymerization of Protective Polyaniline Coating on Copper",
pages = "87-90",
url = "https://hdl.handle.net/21.15107/rcub_dais_547"
}

Gvozdenović, M. M., Jugović, B., Stevanović, J., Trišović, T.,& Grgur, B. N.. (2011). Electrochemical Polymerization of Protective Polyaniline Coating on Copper. in 43rd International October Conference on Mining and Metallurgy - IOC 2011, October 12-15, 2011, Kladovo, Serbia: Proceedings
Bor: Technical Faculty., 87-90.
https://hdl.handle.net/21.15107/rcub_dais_547

Gvozdenović MM, Jugović B, Stevanović J, Trišović T, Grgur BN. Electrochemical Polymerization of Protective Polyaniline Coating on Copper. in 43rd International October Conference on Mining and Metallurgy - IOC 2011, October 12-15, 2011, Kladovo, Serbia: Proceedings. 2011;:87-90.
https://hdl.handle.net/21.15107/rcub_dais_547 .

Gvozdenović, Milica M., Jugović, Branimir, Stevanović, Jasmina, Trišović, Tomislav, Grgur, Branimir N., "Electrochemical Polymerization of Protective Polyaniline Coating on Copper" in 43rd International October Conference on Mining and Metallurgy - IOC 2011, October 12-15, 2011, Kladovo, Serbia: Proceedings (2011):87-90,
https://hdl.handle.net/21.15107/rcub_dais_547 .

TY  - CONF
AU  - Jugović, Branimir
AU  - Gvozdenović, Milica M.
AU  - Trišović, Tomislav
AU  - Stevanović, Jasmina
AU  - Grgur, Branimir N.
PY  - 2011
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/3996
AB  - Poster presented at the 38th International Conference of Slovak Society of Chemical Engineering, Tatranske Matliare, Slovakia, May 23–27, 2011
T1  - Electrochemical behavior of polyaniline in chloride/citrate electrolyte
UR  - https://hdl.handle.net/21.15107/rcub_dais_548
ER  - 

@conference{
author = "Jugović, Branimir and Gvozdenović, Milica M. and Trišović, Tomislav and Stevanović, Jasmina and Grgur, Branimir N.",
year = "2011",
abstract = "Poster presented at the 38th International Conference of Slovak Society of Chemical Engineering, Tatranske Matliare, Slovakia, May 23–27, 2011",
title = "Electrochemical behavior of polyaniline in chloride/citrate electrolyte",
url = "https://hdl.handle.net/21.15107/rcub_dais_548"
}

Jugović, B., Gvozdenović, M. M., Trišović, T., Stevanović, J.,& Grgur, B. N.. (2011). Electrochemical behavior of polyaniline in chloride/citrate electrolyte. .
https://hdl.handle.net/21.15107/rcub_dais_548

Jugović B, Gvozdenović MM, Trišović T, Stevanović J, Grgur BN. Electrochemical behavior of polyaniline in chloride/citrate electrolyte. 2011;.
https://hdl.handle.net/21.15107/rcub_dais_548 .

Jugović, Branimir, Gvozdenović, Milica M., Trišović, Tomislav, Stevanović, Jasmina, Grgur, Branimir N., "Electrochemical behavior of polyaniline in chloride/citrate electrolyte" (2011),
https://hdl.handle.net/21.15107/rcub_dais_548 .

TY  - CONF
AU  - Gvozdenović, Milica M.
AU  - Trišović, Tomislav
AU  - Stevanović, Jasmina
AU  - Jugović, Branimir
AU  - Grgur, Branimir N.
PY  - 2010
UR  - http://dais.sanu.ac.rs/123456789/3497
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/2610
AB  - Polyaniline (PANI) anode, electrochemically synthesized on graphite electrode from sulfuric acid solution, and electrochemically formed thin film lead dioxide cathode, were investigated for possible applications as electrode materials in PANI | H2SO4 | PbO2 aqueous based rechargeable power sources. The stimulation of charge/discharge characteristics of the cell, based on half cell reactions investigations, was evaluated. Charging of the cell would occur in the voltage range of 1.2 and 1.7 V, while discharge would occur in the range of 1.3 and 1 V.
PB  - Tatranské Matliare : Slovak Society of Chemical Engineering
C3  - Proceedings of the 37th International Conference of Slovak Society of Chemical Engineering
T1  - Characteristics of polyaniline lead - dioxide power sources
SP  - 871
EP  - 875
UR  - https://hdl.handle.net/21.15107/rcub_dais_3497
ER  - 

@conference{
author = "Gvozdenović, Milica M. and Trišović, Tomislav and Stevanović, Jasmina and Jugović, Branimir and Grgur, Branimir N.",
year = "2010",
abstract = "Polyaniline (PANI) anode, electrochemically synthesized on graphite electrode from sulfuric acid solution, and electrochemically formed thin film lead dioxide cathode, were investigated for possible applications as electrode materials in PANI | H2SO4 | PbO2 aqueous based rechargeable power sources. The stimulation of charge/discharge characteristics of the cell, based on half cell reactions investigations, was evaluated. Charging of the cell would occur in the voltage range of 1.2 and 1.7 V, while discharge would occur in the range of 1.3 and 1 V.",
publisher = "Tatranské Matliare : Slovak Society of Chemical Engineering",
journal = "Proceedings of the 37th International Conference of Slovak Society of Chemical Engineering",
title = "Characteristics of polyaniline lead - dioxide power sources",
pages = "871-875",
url = "https://hdl.handle.net/21.15107/rcub_dais_3497"
}

Gvozdenović, M. M., Trišović, T., Stevanović, J., Jugović, B.,& Grgur, B. N.. (2010). Characteristics of polyaniline lead - dioxide power sources. in Proceedings of the 37th International Conference of Slovak Society of Chemical Engineering
Tatranské Matliare : Slovak Society of Chemical Engineering., 871-875.
https://hdl.handle.net/21.15107/rcub_dais_3497

Gvozdenović MM, Trišović T, Stevanović J, Jugović B, Grgur BN. Characteristics of polyaniline lead - dioxide power sources. in Proceedings of the 37th International Conference of Slovak Society of Chemical Engineering. 2010;:871-875.
https://hdl.handle.net/21.15107/rcub_dais_3497 .

Gvozdenović, Milica M., Trišović, Tomislav, Stevanović, Jasmina, Jugović, Branimir, Grgur, Branimir N., "Characteristics of polyaniline lead - dioxide power sources" in Proceedings of the 37th International Conference of Slovak Society of Chemical Engineering (2010):871-875,
https://hdl.handle.net/21.15107/rcub_dais_3497 .

TY  - CONF
AU  - Jugović, Branimir
AU  - Trišović, Tomislav
AU  - Stevanović, Jasmina
AU  - Gvozdenović, Milica M.
AU  - Grgur, Branimir N.
PY  - 2010
UR  - http://dais.sanu.ac.rs/123456789/3498
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/2613
AB  - Electrochemical behavior of zinc and polyaniline (PANI) electrode polymerized from 0.1 M HCl and 0.1 M aniline on graphite electrode, in 0.2 M ZnCl2 and 0.50 M NH4Cl (chloride electrolyte) and with addition of 0.33 M Na-citrate (chloride/citrate electrolyte) were investigated. In the chloride/citrate comparing with chloride containing electrolyte for the zinc electrode negative shift of the open circuit potential of 150 mV, decreases of exchange current density for more than order of magnitude and increase of cathodic Tafel slope, due to the zinc ions complexation, were observed. In citrate/chloride electrolyte zinc dendrite formation were completely suppressed. PANI electrodes show better discharge characteristic in chloride/citrate electrolyte with determined maximum discharge capacity of 164 mAh g-1.
PB  - Tatranské Matliare : Slovak Society of Chemical Engineering
C3  - Proceedings of the 37th International Conference of Slovak Society of Chemical Engineering
T1  - Improved electrolyte for zinc-polyaniline batteries
SP  - 866
EP  - 870
UR  - https://hdl.handle.net/21.15107/rcub_dais_3498
ER  - 

@conference{
author = "Jugović, Branimir and Trišović, Tomislav and Stevanović, Jasmina and Gvozdenović, Milica M. and Grgur, Branimir N.",
year = "2010",
abstract = "Electrochemical behavior of zinc and polyaniline (PANI) electrode polymerized from 0.1 M HCl and 0.1 M aniline on graphite electrode, in 0.2 M ZnCl2 and 0.50 M NH4Cl (chloride electrolyte) and with addition of 0.33 M Na-citrate (chloride/citrate electrolyte) were investigated. In the chloride/citrate comparing with chloride containing electrolyte for the zinc electrode negative shift of the open circuit potential of 150 mV, decreases of exchange current density for more than order of magnitude and increase of cathodic Tafel slope, due to the zinc ions complexation, were observed. In citrate/chloride electrolyte zinc dendrite formation were completely suppressed. PANI electrodes show better discharge characteristic in chloride/citrate electrolyte with determined maximum discharge capacity of 164 mAh g-1.",
publisher = "Tatranské Matliare : Slovak Society of Chemical Engineering",
journal = "Proceedings of the 37th International Conference of Slovak Society of Chemical Engineering",
title = "Improved electrolyte for zinc-polyaniline batteries",
pages = "866-870",
url = "https://hdl.handle.net/21.15107/rcub_dais_3498"
}

Jugović, B., Trišović, T., Stevanović, J., Gvozdenović, M. M.,& Grgur, B. N.. (2010). Improved electrolyte for zinc-polyaniline batteries. in Proceedings of the 37th International Conference of Slovak Society of Chemical Engineering
Tatranské Matliare : Slovak Society of Chemical Engineering., 866-870.
https://hdl.handle.net/21.15107/rcub_dais_3498

Jugović B, Trišović T, Stevanović J, Gvozdenović MM, Grgur BN. Improved electrolyte for zinc-polyaniline batteries. in Proceedings of the 37th International Conference of Slovak Society of Chemical Engineering. 2010;:866-870.
https://hdl.handle.net/21.15107/rcub_dais_3498 .

Jugović, Branimir, Trišović, Tomislav, Stevanović, Jasmina, Gvozdenović, Milica M., Grgur, Branimir N., "Improved electrolyte for zinc-polyaniline batteries" in Proceedings of the 37th International Conference of Slovak Society of Chemical Engineering (2010):866-870,
https://hdl.handle.net/21.15107/rcub_dais_3498 .

TY  - CONF
AU  - Gvozdenović, Milica M.
AU  - Jugović, Branimir
AU  - Trišović, Tomislav
AU  - Stevanović, Jasmina
AU  - Grgur, Branimir N.
PY  - 2010
UR  - http://dais.sanu.ac.rs/123456789/3514
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/2614
AB  - Polyaniline (PANI) electrode was formed by electrochemical synthesis on graphite under galvanostatic condition at current density of 2.0 mA cm-2 from aqueous solution of 1.0 mol dm-3 HCl and 0.25 mol dm-3 aniline. Electrochemical characterization of the PANI electrode was performed in 0.5 mol dm-3 HCl using cyclic voltammetry and galvanostatic measurements. The overall charge capacity of the PANI electrode was estimated to be 0.154 mA h cm-2, corresponding to 25 % of the theoretical mass of PANI available for the dopant exchange. It was observed that during initial cyclization at low pH, the extent of PANI degradation products was insignificant and practically had no influence on the charge/discharge characteristics of the PANI electrode.
PB  - Nice : International Society of Electrochemistry
C3  - The 61st Annual Meeting of the International Society of Electrochemistry: Electrochemistry from Biology to Physics September 26th - October 1st, 2010, Nice, France: Book of Abstracts
T1  - Electrochemical characterization of polyaniline electrode for use in electrochemical power sources
SP  - s05-P-049
UR  - https://hdl.handle.net/21.15107/rcub_dais_3514
ER  - 

@conference{
author = "Gvozdenović, Milica M. and Jugović, Branimir and Trišović, Tomislav and Stevanović, Jasmina and Grgur, Branimir N.",
year = "2010",
abstract = "Polyaniline (PANI) electrode was formed by electrochemical synthesis on graphite under galvanostatic condition at current density of 2.0 mA cm-2 from aqueous solution of 1.0 mol dm-3 HCl and 0.25 mol dm-3 aniline. Electrochemical characterization of the PANI electrode was performed in 0.5 mol dm-3 HCl using cyclic voltammetry and galvanostatic measurements. The overall charge capacity of the PANI electrode was estimated to be 0.154 mA h cm-2, corresponding to 25 % of the theoretical mass of PANI available for the dopant exchange. It was observed that during initial cyclization at low pH, the extent of PANI degradation products was insignificant and practically had no influence on the charge/discharge characteristics of the PANI electrode.",
publisher = "Nice : International Society of Electrochemistry",
journal = "The 61st Annual Meeting of the International Society of Electrochemistry: Electrochemistry from Biology to Physics September 26th - October 1st, 2010, Nice, France: Book of Abstracts",
title = "Electrochemical characterization of polyaniline electrode for use in electrochemical power sources",
pages = "s05-P-049",
url = "https://hdl.handle.net/21.15107/rcub_dais_3514"
}

Gvozdenović, M. M., Jugović, B., Trišović, T., Stevanović, J.,& Grgur, B. N.. (2010). Electrochemical characterization of polyaniline electrode for use in electrochemical power sources. in The 61st Annual Meeting of the International Society of Electrochemistry: Electrochemistry from Biology to Physics September 26th - October 1st, 2010, Nice, France: Book of Abstracts
Nice : International Society of Electrochemistry., s05-P-049.
https://hdl.handle.net/21.15107/rcub_dais_3514

Gvozdenović MM, Jugović B, Trišović T, Stevanović J, Grgur BN. Electrochemical characterization of polyaniline electrode for use in electrochemical power sources. in The 61st Annual Meeting of the International Society of Electrochemistry: Electrochemistry from Biology to Physics September 26th - October 1st, 2010, Nice, France: Book of Abstracts. 2010;:s05-P-049.
https://hdl.handle.net/21.15107/rcub_dais_3514 .

Gvozdenović, Milica M., Jugović, Branimir, Trišović, Tomislav, Stevanović, Jasmina, Grgur, Branimir N., "Electrochemical characterization of polyaniline electrode for use in electrochemical power sources" in The 61st Annual Meeting of the International Society of Electrochemistry: Electrochemistry from Biology to Physics September 26th - October 1st, 2010, Nice, France: Book of Abstracts (2010):s05-P-049,
https://hdl.handle.net/21.15107/rcub_dais_3514 .

TY  - CONF
AU  - Jugović, Branimir
AU  - Gvozdenović, Milica M.
AU  - Stevanović, Jasmina
AU  - Trišović, Tomislav
AU  - Grgur, Branimir N.
PY  - 2010
UR  - http://dais.sanu.ac.rs/123456789/3511
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/2615
AB  - Polyaniline electrode, was obtained by electrochemical polymerization at constant current density of 2.0 mA cm-2 from aqueous solution of 1.0 mol dm-3 HCl containing 0.25 mol dm-3 aniline. Electrochemical characterization of the polyaniline electrode in chloride and chloride/citrate electrolyte, for different anodic potential limits, was performed using cyclic voltammetry and galvanostatic measurements. It was observed that for anodic potential 0.32 V, higher electrode capacity in chloride/citrate was obtained. For anodic potential limit of 0.50 V, faster decrease of the electrode capacity in chloride/citrate electrolyte was also observed. It was suggested that influence of both chloride and citrate anions has to be taken into account.
PB  - Nice : International Society of Electrochemistry
C3  - The 61st Annual Meeting of the International Society of Electrochemistry: Electrochemistry from Biology to Physics September 26th - October 1st, 2010, Nice, France: Book of Abstracts
T1  - Electrochemical characterization of electrochemically polymerized polyaniline in citrate containing electrolyte
SP  - s05-P-054
UR  - https://hdl.handle.net/21.15107/rcub_dais_3511
ER  - 

@conference{
author = "Jugović, Branimir and Gvozdenović, Milica M. and Stevanović, Jasmina and Trišović, Tomislav and Grgur, Branimir N.",
year = "2010",
abstract = "Polyaniline electrode, was obtained by electrochemical polymerization at constant current density of 2.0 mA cm-2 from aqueous solution of 1.0 mol dm-3 HCl containing 0.25 mol dm-3 aniline. Electrochemical characterization of the polyaniline electrode in chloride and chloride/citrate electrolyte, for different anodic potential limits, was performed using cyclic voltammetry and galvanostatic measurements. It was observed that for anodic potential 0.32 V, higher electrode capacity in chloride/citrate was obtained. For anodic potential limit of 0.50 V, faster decrease of the electrode capacity in chloride/citrate electrolyte was also observed. It was suggested that influence of both chloride and citrate anions has to be taken into account.",
publisher = "Nice : International Society of Electrochemistry",
journal = "The 61st Annual Meeting of the International Society of Electrochemistry: Electrochemistry from Biology to Physics September 26th - October 1st, 2010, Nice, France: Book of Abstracts",
title = "Electrochemical characterization of electrochemically polymerized polyaniline in citrate containing electrolyte",
pages = "s05-P-054",
url = "https://hdl.handle.net/21.15107/rcub_dais_3511"
}

Jugović, B., Gvozdenović, M. M., Stevanović, J., Trišović, T.,& Grgur, B. N.. (2010). Electrochemical characterization of electrochemically polymerized polyaniline in citrate containing electrolyte. in The 61st Annual Meeting of the International Society of Electrochemistry: Electrochemistry from Biology to Physics September 26th - October 1st, 2010, Nice, France: Book of Abstracts
Nice : International Society of Electrochemistry., s05-P-054.
https://hdl.handle.net/21.15107/rcub_dais_3511

Jugović B, Gvozdenović MM, Stevanović J, Trišović T, Grgur BN. Electrochemical characterization of electrochemically polymerized polyaniline in citrate containing electrolyte. in The 61st Annual Meeting of the International Society of Electrochemistry: Electrochemistry from Biology to Physics September 26th - October 1st, 2010, Nice, France: Book of Abstracts. 2010;:s05-P-054.
https://hdl.handle.net/21.15107/rcub_dais_3511 .

Jugović, Branimir, Gvozdenović, Milica M., Stevanović, Jasmina, Trišović, Tomislav, Grgur, Branimir N., "Electrochemical characterization of electrochemically polymerized polyaniline in citrate containing electrolyte" in The 61st Annual Meeting of the International Society of Electrochemistry: Electrochemistry from Biology to Physics September 26th - October 1st, 2010, Nice, France: Book of Abstracts (2010):s05-P-054,
https://hdl.handle.net/21.15107/rcub_dais_3511 .

TY  - CONF
AU  - Jugović, Branimir
AU  - Trišović, Tomislav
AU  - Stevanović, Jasmina
AU  - Gvozdenović, Milica M.
AU  - Grgur, Branimir N.
PY  - 2010
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/3997
AB  - Poster presented at the 37th International conference of the Slovak Society of Chemical Engineering, Vysoké Tatry, Slovakia, May 24-28, 2010
AB  - Electrochemical behavior of zinc and polyaniline (PANI) electrode polymerized from 0.1 M HCl and 0.1 M aniline on graphite electrode, in 0.2 M ZnCl2 and 0.50 M NH4Cl (chloride electrolyte) and with addition of 0.33 M Na-citrate (chloride/citrate electrolyte) were investigated. In the chloride/citrate comparing with chloride containing electrolyte for the zinc electrode negative shift of the open circuit potential of 150 mV, decreases of exchange current density for more than order of magnitude and increase of cathodic Tafel slope, due to the zinc ions complexation, were observed. In citrate/chloride electrolyte zinc dendrite formation were completely suppressed. PANI electrodes show better discharge characteristic in chloride/citrate electrolyte with determined maximum discharge capacity of 164 mAh g-1
T1  - Improved electrolyte for zinc-polyaniline batteries
UR  - https://hdl.handle.net/21.15107/rcub_dais_3498
ER  - 

@conference{
author = "Jugović, Branimir and Trišović, Tomislav and Stevanović, Jasmina and Gvozdenović, Milica M. and Grgur, Branimir N.",
year = "2010",
abstract = "Poster presented at the 37th International conference of the Slovak Society of Chemical Engineering, Vysoké Tatry, Slovakia, May 24-28, 2010, Electrochemical behavior of zinc and polyaniline (PANI) electrode polymerized from 0.1 M HCl and 0.1 M aniline on graphite electrode, in 0.2 M ZnCl2 and 0.50 M NH4Cl (chloride electrolyte) and with addition of 0.33 M Na-citrate (chloride/citrate electrolyte) were investigated. In the chloride/citrate comparing with chloride containing electrolyte for the zinc electrode negative shift of the open circuit potential of 150 mV, decreases of exchange current density for more than order of magnitude and increase of cathodic Tafel slope, due to the zinc ions complexation, were observed. In citrate/chloride electrolyte zinc dendrite formation were completely suppressed. PANI electrodes show better discharge characteristic in chloride/citrate electrolyte with determined maximum discharge capacity of 164 mAh g-1",
title = "Improved electrolyte for zinc-polyaniline batteries",
url = "https://hdl.handle.net/21.15107/rcub_dais_3498"
}

Jugović, B., Trišović, T., Stevanović, J., Gvozdenović, M. M.,& Grgur, B. N.. (2010). Improved electrolyte for zinc-polyaniline batteries. .
https://hdl.handle.net/21.15107/rcub_dais_3498

Jugović B, Trišović T, Stevanović J, Gvozdenović MM, Grgur BN. Improved electrolyte for zinc-polyaniline batteries. 2010;.
https://hdl.handle.net/21.15107/rcub_dais_3498 .

Jugović, Branimir, Trišović, Tomislav, Stevanović, Jasmina, Gvozdenović, Milica M., Grgur, Branimir N., "Improved electrolyte for zinc-polyaniline batteries" (2010),
https://hdl.handle.net/21.15107/rcub_dais_3498 .

TY  - JOUR
AU  - Jugović, Branimir
AU  - Gvozdenović, Milica M.
AU  - Stevanović, Jasmina
AU  - Trišović, Tomislav
AU  - Grgur, Branimir N.
PY  - 2009
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/507
AB  - Polyaniline (PANI) on graphite electrode was synthesized electrochemically under galvanostatic condition at current density of 2.0 mA cm-2 from aqueous solution of 1.0 moldm-3 HCl and 0.25 mol dm-3 aniline monomer. Electrochemical characterization of the PANI electrode was performed in 0.5 mol dm-3 HCl using cyclic voltammetry and galvanostatic measurements. The overall charge capacity of the PANI electrode was estimated to be 0.154 mA h cm-2, which corresponds to 25% of the theoretical mass of PANI available for doping exchange. It was observed that during initial cyclization at low pH, the extent of PANI degradation products was insigni cant and practically had no infuence on the charge/discharge characteristics of the PANI electrode. .
AB  - Polianilin na grafitnoj elektrodi je sintetisan elektrohemijski pod galvanostatskim režimom taloženja pri gustini struje od 2.0 mA cm-1 iz rastvora 1.0 mol dm-3 HCl i 0.25 mol dm-3 anilina. Elektrohemijska karakterizacija PANI elektrode je urađena u rastvoru 0.5 M HCl cikličnom voltametrijom i galvanostatskim merenjima. Kapacitet PANI elektrode je izračunat na 0.154 mA h cm-2 što odgovara 25 % od teoretske mase PANI koja može da razmeni dopante. Tokom ciklizacije pri niskim rN vrednostima udeo udeo degradacionih produkata je mali i nema uticaj na kapacitet PANI elektrode. .
PB  - Belgrade, Serbia : Engineering Society for Corrosion
T2  - Zaštita materijala
T1  - Characterization of electrochemically synthesized pani on graphite electrode for potential use in electrochemical power sources
T1  - Elektrohemijska sinteza i karakterizacija elektrode od polianilina za potencijalnu upotrebu u elektrohemijskim izvorima energije
VL  - 50
IS  - 1
SP  - 29
EP  - 33
UR  - https://hdl.handle.net/21.15107/rcub_dais_4842
ER  - 

@article{
author = "Jugović, Branimir and Gvozdenović, Milica M. and Stevanović, Jasmina and Trišović, Tomislav and Grgur, Branimir N.",
year = "2009",
abstract = "Polyaniline (PANI) on graphite electrode was synthesized electrochemically under galvanostatic condition at current density of 2.0 mA cm-2 from aqueous solution of 1.0 moldm-3 HCl and 0.25 mol dm-3 aniline monomer. Electrochemical characterization of the PANI electrode was performed in 0.5 mol dm-3 HCl using cyclic voltammetry and galvanostatic measurements. The overall charge capacity of the PANI electrode was estimated to be 0.154 mA h cm-2, which corresponds to 25% of the theoretical mass of PANI available for doping exchange. It was observed that during initial cyclization at low pH, the extent of PANI degradation products was insigni cant and practically had no infuence on the charge/discharge characteristics of the PANI electrode. ., Polianilin na grafitnoj elektrodi je sintetisan elektrohemijski pod galvanostatskim režimom taloženja pri gustini struje od 2.0 mA cm-1 iz rastvora 1.0 mol dm-3 HCl i 0.25 mol dm-3 anilina. Elektrohemijska karakterizacija PANI elektrode je urađena u rastvoru 0.5 M HCl cikličnom voltametrijom i galvanostatskim merenjima. Kapacitet PANI elektrode je izračunat na 0.154 mA h cm-2 što odgovara 25 % od teoretske mase PANI koja može da razmeni dopante. Tokom ciklizacije pri niskim rN vrednostima udeo udeo degradacionih produkata je mali i nema uticaj na kapacitet PANI elektrode. .",
publisher = "Belgrade, Serbia : Engineering Society for Corrosion",
journal = "Zaštita materijala",
title = "Characterization of electrochemically synthesized pani on graphite electrode for potential use in electrochemical power sources, Elektrohemijska sinteza i karakterizacija elektrode od polianilina za potencijalnu upotrebu u elektrohemijskim izvorima energije",
volume = "50",
number = "1",
pages = "29-33",
url = "https://hdl.handle.net/21.15107/rcub_dais_4842"
}

Jugović, B., Gvozdenović, M. M., Stevanović, J., Trišović, T.,& Grgur, B. N.. (2009). Characterization of electrochemically synthesized pani on graphite electrode for potential use in electrochemical power sources. in Zaštita materijala
Belgrade, Serbia : Engineering Society for Corrosion., 50(1), 29-33.
https://hdl.handle.net/21.15107/rcub_dais_4842

Jugović B, Gvozdenović MM, Stevanović J, Trišović T, Grgur BN. Characterization of electrochemically synthesized pani on graphite electrode for potential use in electrochemical power sources. in Zaštita materijala. 2009;50(1):29-33.
https://hdl.handle.net/21.15107/rcub_dais_4842 .

Jugović, Branimir, Gvozdenović, Milica M., Stevanović, Jasmina, Trišović, Tomislav, Grgur, Branimir N., "Characterization of electrochemically synthesized pani on graphite electrode for potential use in electrochemical power sources" in Zaštita materijala, 50, no. 1 (2009):29-33,
https://hdl.handle.net/21.15107/rcub_dais_4842 .

TY  - JOUR
AU  - Jugović, Branimir
AU  - Gvozdenović, Milica M.
AU  - Stevanović, Jasmina
AU  - Trišović, Tomislav
AU  - Grgur, Branimir N.
PY  - 2009
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/538
AB  - Corrosion behavior of magnesium, aluminum and zinc in 0.2 mol dm(-3) NH4Cl; 0.1 mol dm(-3) NH4Cl with addition of 0.1 mol dm(-3) Na-citrate and corrosion behavior of zinc in 0.3 mol dm-3 NH4Cl with addition of 0.8 mol dm(-3) Na-citrate and different concentration of ZnCl2 were investigated. Corrosion current densities were determinated from the mass lost and from potentiodynamic (1 mV s(-1)) measurements. It was concluded that magnesium and aluminum are not suitable anodic materials for use in primary electrochemical power sources. On the other hand, it was concluded that zinc could be considered as possible anodic material in both primary and secondary electrochemical power sources.
PB  - Elsevier Sci Ltd, Oxford
T2  - Materials & Design
T1  - Corrosion behavior of magnesium, aluminum and zinc as anodic materials in chloride based electrolytes for use in primary and secondary electrochemical power sources
VL  - 30
IS  - 8
SP  - 3291
EP  - 3294
DO  - 10.1016/j.matdes.2008.12.019
ER  - 

@article{
author = "Jugović, Branimir and Gvozdenović, Milica M. and Stevanović, Jasmina and Trišović, Tomislav and Grgur, Branimir N.",
year = "2009",
abstract = "Corrosion behavior of magnesium, aluminum and zinc in 0.2 mol dm(-3) NH4Cl; 0.1 mol dm(-3) NH4Cl with addition of 0.1 mol dm(-3) Na-citrate and corrosion behavior of zinc in 0.3 mol dm-3 NH4Cl with addition of 0.8 mol dm(-3) Na-citrate and different concentration of ZnCl2 were investigated. Corrosion current densities were determinated from the mass lost and from potentiodynamic (1 mV s(-1)) measurements. It was concluded that magnesium and aluminum are not suitable anodic materials for use in primary electrochemical power sources. On the other hand, it was concluded that zinc could be considered as possible anodic material in both primary and secondary electrochemical power sources.",
publisher = "Elsevier Sci Ltd, Oxford",
journal = "Materials & Design",
title = "Corrosion behavior of magnesium, aluminum and zinc as anodic materials in chloride based electrolytes for use in primary and secondary electrochemical power sources",
volume = "30",
number = "8",
pages = "3291-3294",
doi = "10.1016/j.matdes.2008.12.019"
}

Jugović, B., Gvozdenović, M. M., Stevanović, J., Trišović, T.,& Grgur, B. N.. (2009). Corrosion behavior of magnesium, aluminum and zinc as anodic materials in chloride based electrolytes for use in primary and secondary electrochemical power sources. in Materials & Design
Elsevier Sci Ltd, Oxford., 30(8), 3291-3294.
https://doi.org/10.1016/j.matdes.2008.12.019

Jugović B, Gvozdenović MM, Stevanović J, Trišović T, Grgur BN. Corrosion behavior of magnesium, aluminum and zinc as anodic materials in chloride based electrolytes for use in primary and secondary electrochemical power sources. in Materials & Design. 2009;30(8):3291-3294.
doi:10.1016/j.matdes.2008.12.019 .

Jugović, Branimir, Gvozdenović, Milica M., Stevanović, Jasmina, Trišović, Tomislav, Grgur, Branimir N., "Corrosion behavior of magnesium, aluminum and zinc as anodic materials in chloride based electrolytes for use in primary and secondary electrochemical power sources" in Materials & Design, 30, no. 8 (2009):3291-3294,
https://doi.org/10.1016/j.matdes.2008.12.019 . .

TY  - JOUR
AU  - Jugović, Branimir
AU  - Gvozdenović, Milica M.
AU  - Stevanović, Jasmina
AU  - Trišović, Tomislav
AU  - Grgur, Branimir N.
PY  - 2009
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/599
AB  - Polyaniline (PANI) on graphite electrode was synthesized electrochemically under galvanostatic condition at current density of 2.0 mA cm-2 from aqueous solution of 1.0 mol dm-3 HCl and 0.25 mol dm-3 aniline monomer. Electrochemical characterization of the PANI electrode was performed in 0.5 mol dm-3 HCl using cyclic voltammetry and galvanostatic measurements. The overall charge capacity of the PANI electrode was estimated to be 0.154 mAh cm-2, which corresponds to 25% of the theoretical mass of PANI available for doping exchange. It was observed that during initial cyclization at low pH, the extent of PANI degradation products was insignificant and practically had no influence on the charge/discharge characteristics of the PANI electrode.
T2  - Materials Chemistry and Physics
T1  - Characterization of electrochemically synthesized PANI on graphite electrode for potential use in electrochemical power sources
VL  - 114
IS  - 2-3
SP  - 939
EP  - 942
DO  - 10.1016/j.matchemphys.2008.10.069
ER  - 

@article{
author = "Jugović, Branimir and Gvozdenović, Milica M. and Stevanović, Jasmina and Trišović, Tomislav and Grgur, Branimir N.",
year = "2009",
abstract = "Polyaniline (PANI) on graphite electrode was synthesized electrochemically under galvanostatic condition at current density of 2.0 mA cm-2 from aqueous solution of 1.0 mol dm-3 HCl and 0.25 mol dm-3 aniline monomer. Electrochemical characterization of the PANI electrode was performed in 0.5 mol dm-3 HCl using cyclic voltammetry and galvanostatic measurements. The overall charge capacity of the PANI electrode was estimated to be 0.154 mAh cm-2, which corresponds to 25% of the theoretical mass of PANI available for doping exchange. It was observed that during initial cyclization at low pH, the extent of PANI degradation products was insignificant and practically had no influence on the charge/discharge characteristics of the PANI electrode.",
journal = "Materials Chemistry and Physics",
title = "Characterization of electrochemically synthesized PANI on graphite electrode for potential use in electrochemical power sources",
volume = "114",
number = "2-3",
pages = "939-942",
doi = "10.1016/j.matchemphys.2008.10.069"
}

Jugović, B., Gvozdenović, M. M., Stevanović, J., Trišović, T.,& Grgur, B. N.. (2009). Characterization of electrochemically synthesized PANI on graphite electrode for potential use in electrochemical power sources. in Materials Chemistry and Physics, 114(2-3), 939-942.
https://doi.org/10.1016/j.matchemphys.2008.10.069

Jugović B, Gvozdenović MM, Stevanović J, Trišović T, Grgur BN. Characterization of electrochemically synthesized PANI on graphite electrode for potential use in electrochemical power sources. in Materials Chemistry and Physics. 2009;114(2-3):939-942.
doi:10.1016/j.matchemphys.2008.10.069 .

Jugović, Branimir, Gvozdenović, Milica M., Stevanović, Jasmina, Trišović, Tomislav, Grgur, Branimir N., "Characterization of electrochemically synthesized PANI on graphite electrode for potential use in electrochemical power sources" in Materials Chemistry and Physics, 114, no. 2-3 (2009):939-942,
https://doi.org/10.1016/j.matchemphys.2008.10.069 . .

TY  - JOUR
AU  - Jugović, Branimir
AU  - Trišović, Tomislav
AU  - Stevanović, Jasmina
AU  - Gvozdenović, Milica M.
AU  - Grgur, Branimir N.
PY  - 2009
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/614
AB  - Electrochemical behavior of zinc and thin polyaniline (PANI) electrodes in citrate/chloride-contained electrolyte has been investigated by the means of electrolyte composition optimization. Electrolyte contained 0.8 M sodium citrate, 0.3 M ammonium chloride, and ~0.3 M zinc chloride has been found to be an optimum electrolyte for the further applications in the real zinc-polyaniline citrate/chloride-based secondary cell.
T2  - Journal of Applied Electrochemistry
T1  - Citrate-based zinc-polyaniline secondary cell: Part I: Optimization of the citrate/chloride electrolyte
VL  - 39
IS  - 12
SP  - 2521
EP  - 2528
DO  - 10.1007/s10800-009-9946-7
ER  - 

@article{
author = "Jugović, Branimir and Trišović, Tomislav and Stevanović, Jasmina and Gvozdenović, Milica M. and Grgur, Branimir N.",
year = "2009",
abstract = "Electrochemical behavior of zinc and thin polyaniline (PANI) electrodes in citrate/chloride-contained electrolyte has been investigated by the means of electrolyte composition optimization. Electrolyte contained 0.8 M sodium citrate, 0.3 M ammonium chloride, and ~0.3 M zinc chloride has been found to be an optimum electrolyte for the further applications in the real zinc-polyaniline citrate/chloride-based secondary cell.",
journal = "Journal of Applied Electrochemistry",
title = "Citrate-based zinc-polyaniline secondary cell: Part I: Optimization of the citrate/chloride electrolyte",
volume = "39",
number = "12",
pages = "2521-2528",
doi = "10.1007/s10800-009-9946-7"
}

Jugović, B., Trišović, T., Stevanović, J., Gvozdenović, M. M.,& Grgur, B. N.. (2009). Citrate-based zinc-polyaniline secondary cell: Part I: Optimization of the citrate/chloride electrolyte. in Journal of Applied Electrochemistry, 39(12), 2521-2528.
https://doi.org/10.1007/s10800-009-9946-7

Jugović B, Trišović T, Stevanović J, Gvozdenović MM, Grgur BN. Citrate-based zinc-polyaniline secondary cell: Part I: Optimization of the citrate/chloride electrolyte. in Journal of Applied Electrochemistry. 2009;39(12):2521-2528.
doi:10.1007/s10800-009-9946-7 .

Jugović, Branimir, Trišović, Tomislav, Stevanović, Jasmina, Gvozdenović, Milica M., Grgur, Branimir N., "Citrate-based zinc-polyaniline secondary cell: Part I: Optimization of the citrate/chloride electrolyte" in Journal of Applied Electrochemistry, 39, no. 12 (2009):2521-2528,
https://doi.org/10.1007/s10800-009-9946-7 . .