TY  - CONF
AU  - Srećković, Milesa
AU  - Janićijević, Aco
AU  - Janićijević, Milovan
AU  - Pantelić, Slađana
AU  - Nedić, Zoran
AU  - Fidanovski, Zoran
AU  - Polić, Suzana R.
PY  - 2023
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/6446
AB  - Interakcija lasera sa materijalom je već dugo godina aktuelna sa mnogo rešenja, koja su postala komercijalna i gde se i ne stavlja u prvi plan da je reč o laserskom izvoru. To se utapa u elionska rešenja i poređenja delovanja snopova plazme, vode, neutrona, mikrotalasa. Razvijaju se osnovni teorijski i prakrtični evaluirani modeli. U modeliranju, modeli se dalje razvijaju, često se odmah prelazi na numeriku i u zavisnosti od energije / snage, repeticije radne laserske stanice, mogu se birati aproksimacije. U radu će se na osnovu eksperimentalnih izlaganja snopovima formirati niz pretpostavki o predviđanju i  krojenju svojstava starog materijala mogućim novim, izazvanim modifikacijama različitim tehnikama. Posebno će se razmotriti i slučajevi gde se ne zanemaruju efekti uzmaka i ovaj pristup je takođe prikazan, kao i sprega sa akustičnim pojavama. Svojstva materijala biće pokrivena novim spektroskopskim podacima, odnosno komparativnošću ili sagledavanjem materijala iz različitih uglova gledanja, pri čemu podudaranje / nepodudaranje sa teorijskim prilazom, samo po sebi, daje novi pogled na materijale. S druge strane, traže se paralelni procesi koji su prisutni tokom interakcije , ali usled pojave nelinearnih efekata pri većim intenzitetima dolazi do promene mesta raznih pragova za njihovo nastupanje (kao stimulativni procesi, indukovani, i koji se pojavljuju pored spontanih). Kako se i sam lasing pojavljuje kao deo interakcije stimulisane svetlosti / zračenja sa materijalom, posmatra se i pitanje  koeficijenata korisnog dejstva lasera i pragovi lasing-а. Postavlja se i paralela interferometrija / holografija / tomografija sa atributom laserska. Izveli smo naše simulacije za neke od procesa interakcije / rasejanja i eksperimentalne ekspozicije različitim tipovima lasera.
AB  - The interaction of lasers with material has been current for many years with many solutions,which have become commercial and where it is not brought to the fore that it is a laser source. It is drowned in elion solutions and compares the effects of plasma beams, water, neutrons, microwaves. Basic theoretical and practical evaluated models are developed. In modeling, models are further developed, often immediately switching to numerics and depending on the energy /power, repetitions of the working laser station, approximations could be chosen. In the paper, on the basis of experimental exposures to beams, a series of assumptions will be formed about the forecast and tailoring of the properties of the old material with possible new ones, caused by modifications with various techniques. Special consideration will also be given to cases where the effects of recoil are not neglected and this approach is also shown, as well as coupling with acoustic phenomena. The properties of materials will be covered with new spectroscopic data, or the comparability or seeing of materials from various angles of view, where matching / non-matching with the theoretical approach, in itself, gives a new view of materials. On the other hand, parallel processes are sought, which are present during the interaction, but due to the appearance of non- linear effects at higher intensities, there is a change in the place of various thresholds for their occurrence (as stimulating processes, induced, which appear in addition  to spontaneous ones). As lasing itself appears as part of the interaction of stimulated light /radiation with the material, the question of the coefficients of the useful effect of the laser and the thresholds of lasing is also observed. Parallel interferometry / holography / tomography with laser attribute is also set up. We performed our simulations for some of the interaction / scattering processes and experimental exposures to different types of lasers.
PB  - Бања Лука: Академија наука и умјетности Републике Српске / Banja Luka : Academy of Sciences and Arts of the Republic of Srpska
C3  - Međunarodni naučni skup Savremeni materijali: zbornik radova
T1  - Materijali, novi tehnološki trendovi, modelovanje interakcije i uloga kvantnih generatora - lasera danas
T1  - Materials, new technological trends, interaction modeling and the role of quantum generators - lasers today
VL  - 15
SP  - 47
EP  - 68
UR  - https://hdl.handle.net/21.15107/rcub_cer_6446
ER  - 

@conference{
author = "Srećković, Milesa and Janićijević, Aco and Janićijević, Milovan and Pantelić, Slađana and Nedić, Zoran and Fidanovski, Zoran and Polić, Suzana R.",
year = "2023",
abstract = "Interakcija lasera sa materijalom je već dugo godina aktuelna sa mnogo rešenja, koja su postala komercijalna i gde se i ne stavlja u prvi plan da je reč o laserskom izvoru. To se utapa u elionska rešenja i poređenja delovanja snopova plazme, vode, neutrona, mikrotalasa. Razvijaju se osnovni teorijski i prakrtični evaluirani modeli. U modeliranju, modeli se dalje razvijaju, često se odmah prelazi na numeriku i u zavisnosti od energije / snage, repeticije radne laserske stanice, mogu se birati aproksimacije. U radu će se na osnovu eksperimentalnih izlaganja snopovima formirati niz pretpostavki o predviđanju i  krojenju svojstava starog materijala mogućim novim, izazvanim modifikacijama različitim tehnikama. Posebno će se razmotriti i slučajevi gde se ne zanemaruju efekti uzmaka i ovaj pristup je takođe prikazan, kao i sprega sa akustičnim pojavama. Svojstva materijala biće pokrivena novim spektroskopskim podacima, odnosno komparativnošću ili sagledavanjem materijala iz različitih uglova gledanja, pri čemu podudaranje / nepodudaranje sa teorijskim prilazom, samo po sebi, daje novi pogled na materijale. S druge strane, traže se paralelni procesi koji su prisutni tokom interakcije , ali usled pojave nelinearnih efekata pri većim intenzitetima dolazi do promene mesta raznih pragova za njihovo nastupanje (kao stimulativni procesi, indukovani, i koji se pojavljuju pored spontanih). Kako se i sam lasing pojavljuje kao deo interakcije stimulisane svetlosti / zračenja sa materijalom, posmatra se i pitanje  koeficijenata korisnog dejstva lasera i pragovi lasing-а. Postavlja se i paralela interferometrija / holografija / tomografija sa atributom laserska. Izveli smo naše simulacije za neke od procesa interakcije / rasejanja i eksperimentalne ekspozicije različitim tipovima lasera., The interaction of lasers with material has been current for many years with many solutions,which have become commercial and where it is not brought to the fore that it is a laser source. It is drowned in elion solutions and compares the effects of plasma beams, water, neutrons, microwaves. Basic theoretical and practical evaluated models are developed. In modeling, models are further developed, often immediately switching to numerics and depending on the energy /power, repetitions of the working laser station, approximations could be chosen. In the paper, on the basis of experimental exposures to beams, a series of assumptions will be formed about the forecast and tailoring of the properties of the old material with possible new ones, caused by modifications with various techniques. Special consideration will also be given to cases where the effects of recoil are not neglected and this approach is also shown, as well as coupling with acoustic phenomena. The properties of materials will be covered with new spectroscopic data, or the comparability or seeing of materials from various angles of view, where matching / non-matching with the theoretical approach, in itself, gives a new view of materials. On the other hand, parallel processes are sought, which are present during the interaction, but due to the appearance of non- linear effects at higher intensities, there is a change in the place of various thresholds for their occurrence (as stimulating processes, induced, which appear in addition  to spontaneous ones). As lasing itself appears as part of the interaction of stimulated light /radiation with the material, the question of the coefficients of the useful effect of the laser and the thresholds of lasing is also observed. Parallel interferometry / holography / tomography with laser attribute is also set up. We performed our simulations for some of the interaction / scattering processes and experimental exposures to different types of lasers.",
publisher = "Бања Лука: Академија наука и умјетности Републике Српске / Banja Luka : Academy of Sciences and Arts of the Republic of Srpska",
journal = "Međunarodni naučni skup Savremeni materijali: zbornik radova",
title = "Materijali, novi tehnološki trendovi, modelovanje interakcije i uloga kvantnih generatora - lasera danas, Materials, new technological trends, interaction modeling and the role of quantum generators - lasers today",
volume = "15",
pages = "47-68",
url = "https://hdl.handle.net/21.15107/rcub_cer_6446"
}

Srećković, M., Janićijević, A., Janićijević, M., Pantelić, S., Nedić, Z., Fidanovski, Z.,& Polić, S. R.. (2023). Materijali, novi tehnološki trendovi, modelovanje interakcije i uloga kvantnih generatora - lasera danas. in Međunarodni naučni skup Savremeni materijali: zbornik radova
Бања Лука: Академија наука и умјетности Републике Српске / Banja Luka : Academy of Sciences and Arts of the Republic of Srpska., 15, 47-68.
https://hdl.handle.net/21.15107/rcub_cer_6446

Srećković M, Janićijević A, Janićijević M, Pantelić S, Nedić Z, Fidanovski Z, Polić SR. Materijali, novi tehnološki trendovi, modelovanje interakcije i uloga kvantnih generatora - lasera danas. in Međunarodni naučni skup Savremeni materijali: zbornik radova. 2023;15:47-68.
https://hdl.handle.net/21.15107/rcub_cer_6446 .

Srećković, Milesa, Janićijević, Aco, Janićijević, Milovan, Pantelić, Slađana, Nedić, Zoran, Fidanovski, Zoran, Polić, Suzana R., "Materijali, novi tehnološki trendovi, modelovanje interakcije i uloga kvantnih generatora - lasera danas" in Međunarodni naučni skup Savremeni materijali: zbornik radova, 15 (2023):47-68,
https://hdl.handle.net/21.15107/rcub_cer_6446 .

TY  - CONF
AU  - Srećković, Milesa
AU  - Zarubica, Veljko
AU  - Kovačević, Aleksander
AU  - Davidović, Milena
AU  - Polić, Suzana R.
PY  - 2022
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/5970
AB  - Ljudski osećaj za boje ima mnogo aspekata,
počevši od čovekovog poimanja sveta oko sebe, do medicinskih
pojmova koji uključuju i daltonizam, ali (u svakodnevici)
najpozitivniji, najhumaniji je čovekov osećaj za deo dana ili noći
(meseca ili godine), za uživanje u heritološkom blagu, koje su
nam ostavili preci, ali ne samo crno-belo. Istraživanja, kojima je
procenjivan ljudski vek, postojanje i razvoj humanih bića, kao i
nastajanje i evolucija flore i faune, sve ovo mora da bude
tretirano multidisciplinarno, bez obzira da li se polazi od stena,
stalaktita i stalagmita, morskih dubina, tragova u atmosferi ili
potrage za planetom koja je slična Zemlji. U radu se daje
nekoliko prilaza boji i kolorimetriji, sa aspekta raznih naučnih
disciplina. Prikazuje se uloga lasera u novim problematikama,
kvantitativne definicije boje i njenih pokazatelja. U području
merenja, daje se prilaz sa aspekta filtera i korektnog opisa stanja
i delovanja odabranih filtera sa savremenim izražavanjima
rezultata, kao i merne metode. Konstatacija boje i njena
deskripcija, ima veliku ulogu u svakodnevnom životu, kao i u
pojedinim tehničkim i mass media primenama, uključivši i
humanističke i tehničke nauke.
AB  - The human sense of color has many aspects, from man's
understanding of the world around him to medical terms that include
colorblind people, but (in everyday life) the most humane is man's
sense of that part of the day or night (month or year), to enjoy
heritage , left to us by our ancestors. Research assessing human life
span, the existence and development of human beings, as well as the
origin and evolution of flora and fauna, all this must be treated multi
disciplinary, whether we start from rocks, stalactites and stalagmites,
sea depths, atmospheric traces or the search for an Earth-like planet.
The paper gives several approaches to color and colorimetry, from
the aspect of various scientific disciplines. The role of lasers in new
problems, quantitative definitions of color and its indicators are
presented, and in the field of measurement, an approach is given
from the aspect of filters and a correct description of the condition
and operation of selected filters with modern expression of results
and measurement methods. The perception of color and its
description play a major role in everyday life, as well as in certain
technical and mass media applications, including the social and
technical sciences.
PB  - Belgrade : ETRAN Society / Београд : Друштво за ЕТРАН
C3  - Proceedings - LXVI ETRAN Conference, 6 ‐ 9 June, 2022, Novi Pazar, Serbia
T1  - Deskripcija, heritologija i metrologija boje
T1  - Description, heritology and color metrology
SP  - SSHE1.5 Page 1
EP  - SSHE1.5 Page 5
UR  - https://hdl.handle.net/21.15107/rcub_cer_5970
ER  - 

@conference{
author = "Srećković, Milesa and Zarubica, Veljko and Kovačević, Aleksander and Davidović, Milena and Polić, Suzana R.",
year = "2022",
abstract = "Ljudski osećaj za boje ima mnogo aspekata,
počevši od čovekovog poimanja sveta oko sebe, do medicinskih
pojmova koji uključuju i daltonizam, ali (u svakodnevici)
najpozitivniji, najhumaniji je čovekov osećaj za deo dana ili noći
(meseca ili godine), za uživanje u heritološkom blagu, koje su
nam ostavili preci, ali ne samo crno-belo. Istraživanja, kojima je
procenjivan ljudski vek, postojanje i razvoj humanih bića, kao i
nastajanje i evolucija flore i faune, sve ovo mora da bude
tretirano multidisciplinarno, bez obzira da li se polazi od stena,
stalaktita i stalagmita, morskih dubina, tragova u atmosferi ili
potrage za planetom koja je slična Zemlji. U radu se daje
nekoliko prilaza boji i kolorimetriji, sa aspekta raznih naučnih
disciplina. Prikazuje se uloga lasera u novim problematikama,
kvantitativne definicije boje i njenih pokazatelja. U području
merenja, daje se prilaz sa aspekta filtera i korektnog opisa stanja
i delovanja odabranih filtera sa savremenim izražavanjima
rezultata, kao i merne metode. Konstatacija boje i njena
deskripcija, ima veliku ulogu u svakodnevnom životu, kao i u
pojedinim tehničkim i mass media primenama, uključivši i
humanističke i tehničke nauke., The human sense of color has many aspects, from man's
understanding of the world around him to medical terms that include
colorblind people, but (in everyday life) the most humane is man's
sense of that part of the day or night (month or year), to enjoy
heritage , left to us by our ancestors. Research assessing human life
span, the existence and development of human beings, as well as the
origin and evolution of flora and fauna, all this must be treated multi
disciplinary, whether we start from rocks, stalactites and stalagmites,
sea depths, atmospheric traces or the search for an Earth-like planet.
The paper gives several approaches to color and colorimetry, from
the aspect of various scientific disciplines. The role of lasers in new
problems, quantitative definitions of color and its indicators are
presented, and in the field of measurement, an approach is given
from the aspect of filters and a correct description of the condition
and operation of selected filters with modern expression of results
and measurement methods. The perception of color and its
description play a major role in everyday life, as well as in certain
technical and mass media applications, including the social and
technical sciences.",
publisher = "Belgrade : ETRAN Society / Београд : Друштво за ЕТРАН",
journal = "Proceedings - LXVI ETRAN Conference, 6 ‐ 9 June, 2022, Novi Pazar, Serbia",
title = "Deskripcija, heritologija i metrologija boje, Description, heritology and color metrology",
pages = "SSHE1.5 Page 1-SSHE1.5 Page 5",
url = "https://hdl.handle.net/21.15107/rcub_cer_5970"
}

Srećković, M., Zarubica, V., Kovačević, A., Davidović, M.,& Polić, S. R.. (2022). Deskripcija, heritologija i metrologija boje. in Proceedings - LXVI ETRAN Conference, 6 ‐ 9 June, 2022, Novi Pazar, Serbia
Belgrade : ETRAN Society / Београд : Друштво за ЕТРАН., SSHE1.5 Page 1-SSHE1.5 Page 5.
https://hdl.handle.net/21.15107/rcub_cer_5970

Srećković M, Zarubica V, Kovačević A, Davidović M, Polić SR. Deskripcija, heritologija i metrologija boje. in Proceedings - LXVI ETRAN Conference, 6 ‐ 9 June, 2022, Novi Pazar, Serbia. 2022;:SSHE1.5 Page 1-SSHE1.5 Page 5.
https://hdl.handle.net/21.15107/rcub_cer_5970 .

Srećković, Milesa, Zarubica, Veljko, Kovačević, Aleksander, Davidović, Milena, Polić, Suzana R., "Deskripcija, heritologija i metrologija boje" in Proceedings - LXVI ETRAN Conference, 6 ‐ 9 June, 2022, Novi Pazar, Serbia (2022):SSHE1.5 Page 1-SSHE1.5 Page 5,
https://hdl.handle.net/21.15107/rcub_cer_5970 .

TY  - CONF
AU  - Polić, Suzana R.
AU  - Srećković, Milesa
AU  - Stević, Zoran
AU  - Malović, Miodrag
AU  - Đurić, Miloš
PY  - 2022
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/5969
AB  - Heritološki fenomeni u oblasti istraživanja kompozitnih umetničkih dela, u vezi sa raznovrsnošću pristupa u kvalitativnim i kvantitativnim kriterijumima za izbor materijala, postavljaju složene zadatke u primeni instrumentalnih metoda, koje prethode izradi protokola za konzervaciju-restauraciju predmeta kulturne baštine. U ovom radu u fokusu je problem heritološke abdukcije, u heurističkoj proceni broja neophodnih analiza, odnosno deficita podataka u fragmentarnim strukturama koje su izraz umetničkog spontaniteta, a sa akcentom na fenomen praemissa minor u traganju za metodološki čvrstom platformom za interpretaciju podataka.
AB  - Taking into account the diversity of approaches in qualitative and quantitative criteria for material selection heritology phenomena in the field of research of composite art works set complex tasks in the application of instrumental methods, which precede the development of protocols for conservation and restoration of cultural heritage. The focus of this paper is on the problem of heritology abduction, particularly in the domain of heuristic assessment concerning the number of necessary analyses, i.e. the deficit of data in fragmentary structures, these being expressions of artistic spontaneity. At the same time, the paper also tackles the phenomenon of minor assumptions while pursuing a methodologically sound platform for interpreting data.
PB  - Belgrade : ETRAN Society / Београд : Друштво за ЕТРАН
C3  - Proceedings - LXVI ETRAN Conference, 6 ‐ 9 June, 2022, Novi Pazar, Serbia
T1  - Problem heritološke abdukcije u vezi sa instrumentalnim analizama materijala kulturne baštine
T1  - The problem of heritology abduction through instrumental analysis of cultural heritage materials
SP  - SSHE1.4 Page 1
EP  - SSHE1.4 Page 6
UR  - https://hdl.handle.net/21.15107/rcub_cer_5969
ER  - 

@conference{
author = "Polić, Suzana R. and Srećković, Milesa and Stević, Zoran and Malović, Miodrag and Đurić, Miloš",
year = "2022",
abstract = "Heritološki fenomeni u oblasti istraživanja kompozitnih umetničkih dela, u vezi sa raznovrsnošću pristupa u kvalitativnim i kvantitativnim kriterijumima za izbor materijala, postavljaju složene zadatke u primeni instrumentalnih metoda, koje prethode izradi protokola za konzervaciju-restauraciju predmeta kulturne baštine. U ovom radu u fokusu je problem heritološke abdukcije, u heurističkoj proceni broja neophodnih analiza, odnosno deficita podataka u fragmentarnim strukturama koje su izraz umetničkog spontaniteta, a sa akcentom na fenomen praemissa minor u traganju za metodološki čvrstom platformom za interpretaciju podataka., Taking into account the diversity of approaches in qualitative and quantitative criteria for material selection heritology phenomena in the field of research of composite art works set complex tasks in the application of instrumental methods, which precede the development of protocols for conservation and restoration of cultural heritage. The focus of this paper is on the problem of heritology abduction, particularly in the domain of heuristic assessment concerning the number of necessary analyses, i.e. the deficit of data in fragmentary structures, these being expressions of artistic spontaneity. At the same time, the paper also tackles the phenomenon of minor assumptions while pursuing a methodologically sound platform for interpreting data.",
publisher = "Belgrade : ETRAN Society / Београд : Друштво за ЕТРАН",
journal = "Proceedings - LXVI ETRAN Conference, 6 ‐ 9 June, 2022, Novi Pazar, Serbia",
title = "Problem heritološke abdukcije u vezi sa instrumentalnim analizama materijala kulturne baštine, The problem of heritology abduction through instrumental analysis of cultural heritage materials",
pages = "SSHE1.4 Page 1-SSHE1.4 Page 6",
url = "https://hdl.handle.net/21.15107/rcub_cer_5969"
}

Polić, S. R., Srećković, M., Stević, Z., Malović, M.,& Đurić, M.. (2022). Problem heritološke abdukcije u vezi sa instrumentalnim analizama materijala kulturne baštine. in Proceedings - LXVI ETRAN Conference, 6 ‐ 9 June, 2022, Novi Pazar, Serbia
Belgrade : ETRAN Society / Београд : Друштво за ЕТРАН., SSHE1.4 Page 1-SSHE1.4 Page 6.
https://hdl.handle.net/21.15107/rcub_cer_5969

Polić SR, Srećković M, Stević Z, Malović M, Đurić M. Problem heritološke abdukcije u vezi sa instrumentalnim analizama materijala kulturne baštine. in Proceedings - LXVI ETRAN Conference, 6 ‐ 9 June, 2022, Novi Pazar, Serbia. 2022;:SSHE1.4 Page 1-SSHE1.4 Page 6.
https://hdl.handle.net/21.15107/rcub_cer_5969 .

Polić, Suzana R., Srećković, Milesa, Stević, Zoran, Malović, Miodrag, Đurić, Miloš, "Problem heritološke abdukcije u vezi sa instrumentalnim analizama materijala kulturne baštine" in Proceedings - LXVI ETRAN Conference, 6 ‐ 9 June, 2022, Novi Pazar, Serbia (2022):SSHE1.4 Page 1-SSHE1.4 Page 6,
https://hdl.handle.net/21.15107/rcub_cer_5969 .

TY  - CONF
AU  - Polić, Suzana R.
AU  - Srećković, Milesa
AU  - Stević, Zoran
AU  - Bojanić, Slobodan
AU  - Tomić, Željka
PY  - 2022
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/5968
AB  - Primena veštačke inteligencije u zaštiti kulturne baštine, na ovom stepenu razvoja, odnosi se prevashodno na domen akvizicije podataka, koji mogu biti od značaja za stvaranje šire slike o sredstvima i metodama realizacije umetničkih dela. U ovom radu, istražuje se pitanje integracije naučnih znanja u kontekstu primene veštačke inteligencije, u vezi sa delima velikih formata, i to u domenima specifikuma organizacije materije, diferencijacije komponenti i njihovih elemenata, strukturnih planova i matrica koje daju kvalitet unutrašnje koherencije i grade performativnu snagu dela. Multidisciplinarna opservacija treba da doprinese procesu objektivizacije znanja, do koje se, prirodom predmeta istraživanja, može doći samo integracijom elemenata više nauka i naučnih disciplina.
AB  - The application of artificial intelligence in cultural heritage, at this degree of development, refers primarily to the domain of data acquisitions that may be important for the creation of a wider image on the funds and methods of the implementation of works of art. In this paper, the issue of integration of scientific knowledge is investigated in the context of the application of artificial intelligence regarding the works of large formats. It is the domains of the specifics of the organization of matter, the differentiation of components and their elements, structural plans and matrix that give the quality of internal coherence and build the performative power of the work. Multidisciplinary observation should contribute to the process of objectifying the knowledge, to which the nature of the course of research, can only be reached by the integration of elements of several sciences and scientific disciplines.
PB  - Belgrade : ETRAN Society / Београд : Друштво за ЕТРАН
C3  - Proceedings - LXVI ETRAN Conference, 6 ‐ 9, June, 2022, Novi Pazar, Serbia
T1  - Integracije naučnih znanja u primeni veštačke inteligencije u heritološkim problemima
T1  - Integration of scientific knowledge in the application of artificial intelligence in heritological problems
SP  - SSHE1.3 Page 1
EP  - SSHE1.3 Page 4
UR  - https://hdl.handle.net/21.15107/rcub_cer_5968
ER  - 

@conference{
author = "Polić, Suzana R. and Srećković, Milesa and Stević, Zoran and Bojanić, Slobodan and Tomić, Željka",
year = "2022",
abstract = "Primena veštačke inteligencije u zaštiti kulturne baštine, na ovom stepenu razvoja, odnosi se prevashodno na domen akvizicije podataka, koji mogu biti od značaja za stvaranje šire slike o sredstvima i metodama realizacije umetničkih dela. U ovom radu, istražuje se pitanje integracije naučnih znanja u kontekstu primene veštačke inteligencije, u vezi sa delima velikih formata, i to u domenima specifikuma organizacije materije, diferencijacije komponenti i njihovih elemenata, strukturnih planova i matrica koje daju kvalitet unutrašnje koherencije i grade performativnu snagu dela. Multidisciplinarna opservacija treba da doprinese procesu objektivizacije znanja, do koje se, prirodom predmeta istraživanja, može doći samo integracijom elemenata više nauka i naučnih disciplina., The application of artificial intelligence in cultural heritage, at this degree of development, refers primarily to the domain of data acquisitions that may be important for the creation of a wider image on the funds and methods of the implementation of works of art. In this paper, the issue of integration of scientific knowledge is investigated in the context of the application of artificial intelligence regarding the works of large formats. It is the domains of the specifics of the organization of matter, the differentiation of components and their elements, structural plans and matrix that give the quality of internal coherence and build the performative power of the work. Multidisciplinary observation should contribute to the process of objectifying the knowledge, to which the nature of the course of research, can only be reached by the integration of elements of several sciences and scientific disciplines.",
publisher = "Belgrade : ETRAN Society / Београд : Друштво за ЕТРАН",
journal = "Proceedings - LXVI ETRAN Conference, 6 ‐ 9, June, 2022, Novi Pazar, Serbia",
title = "Integracije naučnih znanja u primeni veštačke inteligencije u heritološkim problemima, Integration of scientific knowledge in the application of artificial intelligence in heritological problems",
pages = "SSHE1.3 Page 1-SSHE1.3 Page 4",
url = "https://hdl.handle.net/21.15107/rcub_cer_5968"
}

Polić, S. R., Srećković, M., Stević, Z., Bojanić, S.,& Tomić, Ž.. (2022). Integracije naučnih znanja u primeni veštačke inteligencije u heritološkim problemima. in Proceedings - LXVI ETRAN Conference, 6 ‐ 9, June, 2022, Novi Pazar, Serbia
Belgrade : ETRAN Society / Београд : Друштво за ЕТРАН., SSHE1.3 Page 1-SSHE1.3 Page 4.
https://hdl.handle.net/21.15107/rcub_cer_5968

Polić SR, Srećković M, Stević Z, Bojanić S, Tomić Ž. Integracije naučnih znanja u primeni veštačke inteligencije u heritološkim problemima. in Proceedings - LXVI ETRAN Conference, 6 ‐ 9, June, 2022, Novi Pazar, Serbia. 2022;:SSHE1.3 Page 1-SSHE1.3 Page 4.
https://hdl.handle.net/21.15107/rcub_cer_5968 .

Polić, Suzana R., Srećković, Milesa, Stević, Zoran, Bojanić, Slobodan, Tomić, Željka, "Integracije naučnih znanja u primeni veštačke inteligencije u heritološkim problemima" in Proceedings - LXVI ETRAN Conference, 6 ‐ 9, June, 2022, Novi Pazar, Serbia (2022):SSHE1.3 Page 1-SSHE1.3 Page 4,
https://hdl.handle.net/21.15107/rcub_cer_5968 .

TY  - CONF
AU  - Srećković, Milesa
AU  - Polić, Suzana R.
AU  - Stević, Zoran
AU  - Zarubica, Veljko
AU  - Ostojić, Stanko
PY  - 2022
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/5935
AB  - Kritička preispitivanja postupaka koji se delovanjem na materijale primenjuju u konzervaciji-restauraciji predmeta kulturne baštine, obuhvataju opšta i pojedinačna pitanja o upotrebi novih tehnologija, posebno lasera, u odnosu na klasične prilaze problematici zaštite artefakata, koji imaju arheološku, istorijsku ili umetničku vrednost. Pitanje etičnosti posmatra se sa više aspekata, koji se odnose na materijalna i nematerijalna postupanja prema predmetima zaštite, u smislu ispunjavanja zadate funkcije odabrane tehnike, a pod uslovima najvišeg stepena bezbednosti i ekološke zaštite. U ovom radu u fokusu istraživanja je karakterizacija proto-konceptualnih rešenja u primeni lasera na materijalima predmeta baštine, sa ciljem utvrđivanja eksplikatornih razlika u obrazlaganju potreba za primenu klasičnih pristupa konzervaciji-restauraciji kulturnog nasleđa, sa posebnim osvrtom u domenu tautoloških praksi
AB  - Critical re-examinations of the procedures applied on materials during the conservation-restoration of cultural heritage objects, including general and individual questions about the use of new technologies, especially lasers, in relation to classical approaches to the protection of artifacts of archaeological, historical or artistic value. The issue of ethics is viewed from several aspects related to tangible and intangible actions towards objects of protection, in terms of fulfilling the given function of the chosen technique, and under the conditions of the highest degree of safety and environmental protection. This paper focuses on the characterization of proto-conceptual solutions in the application of lasers on heritage materials, with the aim of determining explicative differences in explaining the need for classical approaches to conservation-restoration of cultural heritage, with special reference to tautological practices.
PB  - Belgrade : ETRAN Society
C3  - Proceedings - LXVI ETRAN Conference, 6 ‐ 9, June, 2022, Novi Pazar, Serbia
T1  - Proto-konceptualna rešenja u primeni lasera u heritologiji
T1  - Proto-conceptual solutions in the application of lasers in heritology
SP  - SSHE1.6.1
EP  - SSHE1.6.4
UR  - https://hdl.handle.net/21.15107/rcub_cer_5935
ER  - 

@conference{
author = "Srećković, Milesa and Polić, Suzana R. and Stević, Zoran and Zarubica, Veljko and Ostojić, Stanko",
year = "2022",
abstract = "Kritička preispitivanja postupaka koji se delovanjem na materijale primenjuju u konzervaciji-restauraciji predmeta kulturne baštine, obuhvataju opšta i pojedinačna pitanja o upotrebi novih tehnologija, posebno lasera, u odnosu na klasične prilaze problematici zaštite artefakata, koji imaju arheološku, istorijsku ili umetničku vrednost. Pitanje etičnosti posmatra se sa više aspekata, koji se odnose na materijalna i nematerijalna postupanja prema predmetima zaštite, u smislu ispunjavanja zadate funkcije odabrane tehnike, a pod uslovima najvišeg stepena bezbednosti i ekološke zaštite. U ovom radu u fokusu istraživanja je karakterizacija proto-konceptualnih rešenja u primeni lasera na materijalima predmeta baštine, sa ciljem utvrđivanja eksplikatornih razlika u obrazlaganju potreba za primenu klasičnih pristupa konzervaciji-restauraciji kulturnog nasleđa, sa posebnim osvrtom u domenu tautoloških praksi, Critical re-examinations of the procedures applied on materials during the conservation-restoration of cultural heritage objects, including general and individual questions about the use of new technologies, especially lasers, in relation to classical approaches to the protection of artifacts of archaeological, historical or artistic value. The issue of ethics is viewed from several aspects related to tangible and intangible actions towards objects of protection, in terms of fulfilling the given function of the chosen technique, and under the conditions of the highest degree of safety and environmental protection. This paper focuses on the characterization of proto-conceptual solutions in the application of lasers on heritage materials, with the aim of determining explicative differences in explaining the need for classical approaches to conservation-restoration of cultural heritage, with special reference to tautological practices.",
publisher = "Belgrade : ETRAN Society",
journal = "Proceedings - LXVI ETRAN Conference, 6 ‐ 9, June, 2022, Novi Pazar, Serbia",
title = "Proto-konceptualna rešenja u primeni lasera u heritologiji, Proto-conceptual solutions in the application of lasers in heritology",
pages = "SSHE1.6.1-SSHE1.6.4",
url = "https://hdl.handle.net/21.15107/rcub_cer_5935"
}

Srećković, M., Polić, S. R., Stević, Z., Zarubica, V.,& Ostojić, S.. (2022). Proto-konceptualna rešenja u primeni lasera u heritologiji. in Proceedings - LXVI ETRAN Conference, 6 ‐ 9, June, 2022, Novi Pazar, Serbia
Belgrade : ETRAN Society., SSHE1.6.1-SSHE1.6.4.
https://hdl.handle.net/21.15107/rcub_cer_5935

Srećković M, Polić SR, Stević Z, Zarubica V, Ostojić S. Proto-konceptualna rešenja u primeni lasera u heritologiji. in Proceedings - LXVI ETRAN Conference, 6 ‐ 9, June, 2022, Novi Pazar, Serbia. 2022;:SSHE1.6.1-SSHE1.6.4.
https://hdl.handle.net/21.15107/rcub_cer_5935 .

Srećković, Milesa, Polić, Suzana R., Stević, Zoran, Zarubica, Veljko, Ostojić, Stanko, "Proto-konceptualna rešenja u primeni lasera u heritologiji" in Proceedings - LXVI ETRAN Conference, 6 ‐ 9, June, 2022, Novi Pazar, Serbia (2022):SSHE1.6.1-SSHE1.6.4,
https://hdl.handle.net/21.15107/rcub_cer_5935 .

TY  - CONF
AU  - Srećković, Milesa
AU  - Karastojković, Zoran
AU  - Ivanović, Nenad
AU  - Pantelić, Slađana
AU  - Polić, Suzana R.
AU  - Ostojić, Stanko
AU  - Kovačević, Aleksander
PY  - 2019
UR  - https://www.izdanja.smeits.rs/index.php/mkoiee/article/view/5932
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/6390
AB  - Mnogobrojni metodi transformacije energije, koji se danas koriste praktično u mass media i istraživanjima u raznim savremenim disciplinama zaslužuju analize sa nekoliko aspekata. Jedan od aspekata praktične prirode je poboljšanje karakteristika konstruisanih /ostvarenih senzora i komponenata u praksi, a drugi pitanje transformacije energije i filozofski posmatranog ,,pozitivnog ili negativnog pravca’’. U radu se analiziraju odabrani problemi i problematike, sa teorijske i praktične tačke gledišta, potkrepljene i eksperimentalnim pristupom.
AB  - Versatile methods of energy transformation, among which some of them currently are used even in mass media and in researches at different contemporary disciplines, deserve further analyzing from few aspects. One of the practical approaches is improving the characteristics of designed sensors or components which are present in praxis, while the other is the question of transforming of energy, as some would to say ''from the philosophical view as positive or negative direction“. In this paper are analyzing the chosen problems from the theoretical and practical view points.
PB  - Beograd: Savez mašinskih i elektrotehičkih inženjera i tehničara Srbije (SMEITS) = Belgrade:Union of Mechanical and Electrical Engineers and Technicians of Serbia
C3  - Proceedings - 7th International Conference on Renewable Electrical Power Sources, October 17-18. 2019, Belgrade / Zbornik Međunarodne konferencije o obnovljivim izvorima električne energije – MKOIEE
T1  - Izabrani problemi današnjice u oblasti koherentne optike, fotofizike i interakcije sa elionskim zračenjem
T1  - Chosen contemporary problems in fields of coherent optics, photophysics and interactions with elion radiation
VL  - 7
IS  - 1
SP  - 83
EP  - 99
UR  - https://hdl.handle.net/21.15107/rcub_cer_6390
ER  - 

@conference{
author = "Srećković, Milesa and Karastojković, Zoran and Ivanović, Nenad and Pantelić, Slađana and Polić, Suzana R. and Ostojić, Stanko and Kovačević, Aleksander",
year = "2019",
abstract = "Mnogobrojni metodi transformacije energije, koji se danas koriste praktično u mass media i istraživanjima u raznim savremenim disciplinama zaslužuju analize sa nekoliko aspekata. Jedan od aspekata praktične prirode je poboljšanje karakteristika konstruisanih /ostvarenih senzora i komponenata u praksi, a drugi pitanje transformacije energije i filozofski posmatranog ,,pozitivnog ili negativnog pravca’’. U radu se analiziraju odabrani problemi i problematike, sa teorijske i praktične tačke gledišta, potkrepljene i eksperimentalnim pristupom., Versatile methods of energy transformation, among which some of them currently are used even in mass media and in researches at different contemporary disciplines, deserve further analyzing from few aspects. One of the practical approaches is improving the characteristics of designed sensors or components which are present in praxis, while the other is the question of transforming of energy, as some would to say ''from the philosophical view as positive or negative direction“. In this paper are analyzing the chosen problems from the theoretical and practical view points.",
publisher = "Beograd: Savez mašinskih i elektrotehičkih inženjera i tehničara Srbije (SMEITS) = Belgrade:Union of Mechanical and Electrical Engineers and Technicians of Serbia",
journal = "Proceedings - 7th International Conference on Renewable Electrical Power Sources, October 17-18. 2019, Belgrade / Zbornik Međunarodne konferencije o obnovljivim izvorima električne energije – MKOIEE",
title = "Izabrani problemi današnjice u oblasti koherentne optike, fotofizike i interakcije sa elionskim zračenjem, Chosen contemporary problems in fields of coherent optics, photophysics and interactions with elion radiation",
volume = "7",
number = "1",
pages = "83-99",
url = "https://hdl.handle.net/21.15107/rcub_cer_6390"
}

Srećković, M., Karastojković, Z., Ivanović, N., Pantelić, S., Polić, S. R., Ostojić, S.,& Kovačević, A.. (2019). Izabrani problemi današnjice u oblasti koherentne optike, fotofizike i interakcije sa elionskim zračenjem. in Proceedings - 7th International Conference on Renewable Electrical Power Sources, October 17-18. 2019, Belgrade / Zbornik Međunarodne konferencije o obnovljivim izvorima električne energije – MKOIEE
Beograd: Savez mašinskih i elektrotehičkih inženjera i tehničara Srbije (SMEITS) = Belgrade:Union of Mechanical and Electrical Engineers and Technicians of Serbia., 7(1), 83-99.
https://hdl.handle.net/21.15107/rcub_cer_6390

Srećković M, Karastojković Z, Ivanović N, Pantelić S, Polić SR, Ostojić S, Kovačević A. Izabrani problemi današnjice u oblasti koherentne optike, fotofizike i interakcije sa elionskim zračenjem. in Proceedings - 7th International Conference on Renewable Electrical Power Sources, October 17-18. 2019, Belgrade / Zbornik Međunarodne konferencije o obnovljivim izvorima električne energije – MKOIEE. 2019;7(1):83-99.
https://hdl.handle.net/21.15107/rcub_cer_6390 .

Srećković, Milesa, Karastojković, Zoran, Ivanović, Nenad, Pantelić, Slađana, Polić, Suzana R., Ostojić, Stanko, Kovačević, Aleksander, "Izabrani problemi današnjice u oblasti koherentne optike, fotofizike i interakcije sa elionskim zračenjem" in Proceedings - 7th International Conference on Renewable Electrical Power Sources, October 17-18. 2019, Belgrade / Zbornik Međunarodne konferencije o obnovljivim izvorima električne energije – MKOIEE, 7, no. 1 (2019):83-99,
https://hdl.handle.net/21.15107/rcub_cer_6390 .

TY  - CONF
AU  - Petronić, Sanja
AU  - Polić, Suzana R.
AU  - Dragović, Magdalena
AU  - Srećković, Milesa
AU  - Milosavljević, Anđelka
PY  - 2019
UR  - https://www.izdanja.smeits.rs/index.php/mkoiee/article/view/5957
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/6391
AB  - Dokument o politici za integraciju perspektive održivog razvoja u Konvenciju o svetskoj baštini, koji je usvojila Generalna skupština država članica (UNESCO, 2015), ističe značaj primene obnovljivih izvora energije u oblasti zaštite kulturnog nasleđa. Komparativnom analizom naučnih rezultata u međunarodnoj praksi o primeni obnovljivih izvora energije u zaštiti baštine, u ovom radu istražuju se distinkcije značajne za formulisanje semantičkog plana primene obnovljivih izvora energije u zaštiti baštine, sa akcentima na parametrima ograničenosti i funkcionalnosti primene na značajnim objektima kulturnog nasleđa.
AB  - Policy document on the integration of a sustainable development perspective into the World Heritage Convention, adopted by the General Assembly of States Parties (UNESCO, 2015), empha-sizes the importance of implementing renewable sources of energy into the field of cultural heritage protection. Comparative analysis of scientific results in international practice on the application of renewable energy sources in heritage protection, in this paper explores the distinctions important for formulating a semantic plan for the application of renewable energy sources in heritage protec-tion, with emphasis on the parameters of limitations and functional applicability for significant cul-tural heritage objects.
PB  - Beograd: Savez mašinskih i elektrotehičkih inženjera i tehničara Srbije (SMEITS) = Belgrade:Union of Mechanical and Electrical Engineers and Technicians of Serbia
C3  - Proceedings - 7th International Conference on Renewable Electrical Power Sources, October 17-18. 2019, Belgrade / Zbornik Međunarodne konferencije o obnovljivim izvorima električne energije – MKOIEE
T1  - Distinkcije o obnovljivim izvorima energije  i zaštiti kulturnog nasleđa
T1  - Distinctions on renewable energy sources and cultural heritage protection
VL  - 7
IS  - 1
SP  - 257
EP  - 263
UR  - https://hdl.handle.net/21.15107/rcub_cer_6391
ER  - 

@conference{
author = "Petronić, Sanja and Polić, Suzana R. and Dragović, Magdalena and Srećković, Milesa and Milosavljević, Anđelka",
year = "2019",
abstract = "Dokument o politici za integraciju perspektive održivog razvoja u Konvenciju o svetskoj baštini, koji je usvojila Generalna skupština država članica (UNESCO, 2015), ističe značaj primene obnovljivih izvora energije u oblasti zaštite kulturnog nasleđa. Komparativnom analizom naučnih rezultata u međunarodnoj praksi o primeni obnovljivih izvora energije u zaštiti baštine, u ovom radu istražuju se distinkcije značajne za formulisanje semantičkog plana primene obnovljivih izvora energije u zaštiti baštine, sa akcentima na parametrima ograničenosti i funkcionalnosti primene na značajnim objektima kulturnog nasleđa., Policy document on the integration of a sustainable development perspective into the World Heritage Convention, adopted by the General Assembly of States Parties (UNESCO, 2015), empha-sizes the importance of implementing renewable sources of energy into the field of cultural heritage protection. Comparative analysis of scientific results in international practice on the application of renewable energy sources in heritage protection, in this paper explores the distinctions important for formulating a semantic plan for the application of renewable energy sources in heritage protec-tion, with emphasis on the parameters of limitations and functional applicability for significant cul-tural heritage objects.",
publisher = "Beograd: Savez mašinskih i elektrotehičkih inženjera i tehničara Srbije (SMEITS) = Belgrade:Union of Mechanical and Electrical Engineers and Technicians of Serbia",
journal = "Proceedings - 7th International Conference on Renewable Electrical Power Sources, October 17-18. 2019, Belgrade / Zbornik Međunarodne konferencije o obnovljivim izvorima električne energije – MKOIEE",
title = "Distinkcije o obnovljivim izvorima energije  i zaštiti kulturnog nasleđa, Distinctions on renewable energy sources and cultural heritage protection",
volume = "7",
number = "1",
pages = "257-263",
url = "https://hdl.handle.net/21.15107/rcub_cer_6391"
}

Petronić, S., Polić, S. R., Dragović, M., Srećković, M.,& Milosavljević, A.. (2019). Distinkcije o obnovljivim izvorima energije  i zaštiti kulturnog nasleđa. in Proceedings - 7th International Conference on Renewable Electrical Power Sources, October 17-18. 2019, Belgrade / Zbornik Međunarodne konferencije o obnovljivim izvorima električne energije – MKOIEE
Beograd: Savez mašinskih i elektrotehičkih inženjera i tehničara Srbije (SMEITS) = Belgrade:Union of Mechanical and Electrical Engineers and Technicians of Serbia., 7(1), 257-263.
https://hdl.handle.net/21.15107/rcub_cer_6391

Petronić S, Polić SR, Dragović M, Srećković M, Milosavljević A. Distinkcije o obnovljivim izvorima energije  i zaštiti kulturnog nasleđa. in Proceedings - 7th International Conference on Renewable Electrical Power Sources, October 17-18. 2019, Belgrade / Zbornik Međunarodne konferencije o obnovljivim izvorima električne energije – MKOIEE. 2019;7(1):257-263.
https://hdl.handle.net/21.15107/rcub_cer_6391 .

Petronić, Sanja, Polić, Suzana R., Dragović, Magdalena, Srećković, Milesa, Milosavljević, Anđelka, "Distinkcije o obnovljivim izvorima energije  i zaštiti kulturnog nasleđa" in Proceedings - 7th International Conference on Renewable Electrical Power Sources, October 17-18. 2019, Belgrade / Zbornik Međunarodne konferencije o obnovljivim izvorima električne energije – MKOIEE, 7, no. 1 (2019):257-263,
https://hdl.handle.net/21.15107/rcub_cer_6391 .

TY  - CONF
AU  - Milosavljević, Anđelka
AU  - Polić, Suzana R.
AU  - Srećković, Milesa
AU  - Petronić, Sanja
AU  - Vasiljević, Darko
AU  - Bekrić, Dragoljub
AU  - Nasradin, Dušan
PY  - 2018
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/6190
AB  - Nickel-based superalloys are used in load-bearing structures at elevated temperature and pressure and in harsh environment. Nickel based superalloys have good mechanical properties, good oxidation and corrosion resistance. Among the most demanding applications for a structural material are those in the turbine engines, in first place for turbine blades. Nickel based superalloys consist of nickel solid solution, strengthening ϒ’ phase (Ni3Al) and carbides. At room temperature turbine blades are paramagnetic. The earlier studies reported increase in magnetic properties of Ni3Al after induced deformation. In this paper, the magnetic properties of nickel based superalloy after deformation induced by laser waves are investigated and discussed. Mechanical characteristics are analyzed with regards to changes of magnetics properties.
PB  - Belgrade: Materials Research Society of Serbia
C3  - The Twentieth annual conference YUCOMAT 2018, Programme & Book of abstract
T1  - Magnetic and mechanical characteristics of nickel-based superalloy after laser induced deformation
SP  - 120
UR  - https://hdl.handle.net/21.15107/rcub_cer_6190
ER  - 

@conference{
author = "Milosavljević, Anđelka and Polić, Suzana R. and Srećković, Milesa and Petronić, Sanja and Vasiljević, Darko and Bekrić, Dragoljub and Nasradin, Dušan",
year = "2018",
abstract = "Nickel-based superalloys are used in load-bearing structures at elevated temperature and pressure and in harsh environment. Nickel based superalloys have good mechanical properties, good oxidation and corrosion resistance. Among the most demanding applications for a structural material are those in the turbine engines, in first place for turbine blades. Nickel based superalloys consist of nickel solid solution, strengthening ϒ’ phase (Ni3Al) and carbides. At room temperature turbine blades are paramagnetic. The earlier studies reported increase in magnetic properties of Ni3Al after induced deformation. In this paper, the magnetic properties of nickel based superalloy after deformation induced by laser waves are investigated and discussed. Mechanical characteristics are analyzed with regards to changes of magnetics properties.",
publisher = "Belgrade: Materials Research Society of Serbia",
journal = "The Twentieth annual conference YUCOMAT 2018, Programme & Book of abstract",
title = "Magnetic and mechanical characteristics of nickel-based superalloy after laser induced deformation",
pages = "120",
url = "https://hdl.handle.net/21.15107/rcub_cer_6190"
}

Milosavljević, A., Polić, S. R., Srećković, M., Petronić, S., Vasiljević, D., Bekrić, D.,& Nasradin, D.. (2018). Magnetic and mechanical characteristics of nickel-based superalloy after laser induced deformation. in The Twentieth annual conference YUCOMAT 2018, Programme & Book of abstract
Belgrade: Materials Research Society of Serbia., 120.
https://hdl.handle.net/21.15107/rcub_cer_6190

Milosavljević A, Polić SR, Srećković M, Petronić S, Vasiljević D, Bekrić D, Nasradin D. Magnetic and mechanical characteristics of nickel-based superalloy after laser induced deformation. in The Twentieth annual conference YUCOMAT 2018, Programme & Book of abstract. 2018;:120.
https://hdl.handle.net/21.15107/rcub_cer_6190 .

Milosavljević, Anđelka, Polić, Suzana R., Srećković, Milesa, Petronić, Sanja, Vasiljević, Darko, Bekrić, Dragoljub, Nasradin, Dušan, "Magnetic and mechanical characteristics of nickel-based superalloy after laser induced deformation" in The Twentieth annual conference YUCOMAT 2018, Programme & Book of abstract (2018):120,
https://hdl.handle.net/21.15107/rcub_cer_6190 .

TY  - CONF
AU  - Bugarinović, Aleksandar
AU  - Srećković, Milesa
AU  - Tomić, Željka
AU  - Polić, Suzana R.
AU  - Mamula - Tartalja, Danica
PY  - 2017
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/7581
AB  - Contemporary productions brings more complex elements, with narrower tolerances. Trends to miniaturization in many areas obtain the elements which are often with more deformations and contaminations. Automatizations of the production have faster works and demands to faster monitoring of quality of products. Many processes of manufacturing are in specific conditions, in vacuum environments (chambers) or in controlled conditions. For obtaining specific parameters, needed quality, etc. 
Contactless measuring methods and monitoring exist for great number of such problems and present good solutions. Trends in industry are to organize contactless measuring methods. 
In the paper will be presented considerations, which should contribute to further development of nondestructive methods and applicable to specific demands. The changes of reflectivity point to changes of optical material (objects) performances which tied tp changes of density, electrical conductivity, magnetic susceptibility. ELION techniques include devices which generate electromagnetic fields and react to the changes in them.
PB  - Sopot: Scientific Association for the Development and Promotion of New Technologies
C3  - Book of Abstracts, Third International Conference Modern Methods of Testing and Evaluation in Science, NANT 2016, 24-25.12. 2016, Belgrade
T1  - Contemporary approach to the methods of contactless controls through contributions of modern investigations
SP  - 6
EP  - 6
UR  - https://hdl.handle.net/21.15107/rcub_cer_7581
ER  - 

@conference{
author = "Bugarinović, Aleksandar and Srećković, Milesa and Tomić, Željka and Polić, Suzana R. and Mamula - Tartalja, Danica",
year = "2017",
abstract = "Contemporary productions brings more complex elements, with narrower tolerances. Trends to miniaturization in many areas obtain the elements which are often with more deformations and contaminations. Automatizations of the production have faster works and demands to faster monitoring of quality of products. Many processes of manufacturing are in specific conditions, in vacuum environments (chambers) or in controlled conditions. For obtaining specific parameters, needed quality, etc. 
Contactless measuring methods and monitoring exist for great number of such problems and present good solutions. Trends in industry are to organize contactless measuring methods. 
In the paper will be presented considerations, which should contribute to further development of nondestructive methods and applicable to specific demands. The changes of reflectivity point to changes of optical material (objects) performances which tied tp changes of density, electrical conductivity, magnetic susceptibility. ELION techniques include devices which generate electromagnetic fields and react to the changes in them.",
publisher = "Sopot: Scientific Association for the Development and Promotion of New Technologies",
journal = "Book of Abstracts, Third International Conference Modern Methods of Testing and Evaluation in Science, NANT 2016, 24-25.12. 2016, Belgrade",
title = "Contemporary approach to the methods of contactless controls through contributions of modern investigations",
pages = "6-6",
url = "https://hdl.handle.net/21.15107/rcub_cer_7581"
}

Bugarinović, A., Srećković, M., Tomić, Ž., Polić, S. R.,& Mamula - Tartalja, D.. (2017). Contemporary approach to the methods of contactless controls through contributions of modern investigations. in Book of Abstracts, Third International Conference Modern Methods of Testing and Evaluation in Science, NANT 2016, 24-25.12. 2016, Belgrade
Sopot: Scientific Association for the Development and Promotion of New Technologies., 6-6.
https://hdl.handle.net/21.15107/rcub_cer_7581

Bugarinović A, Srećković M, Tomić Ž, Polić SR, Mamula - Tartalja D. Contemporary approach to the methods of contactless controls through contributions of modern investigations. in Book of Abstracts, Third International Conference Modern Methods of Testing and Evaluation in Science, NANT 2016, 24-25.12. 2016, Belgrade. 2017;:6-6.
https://hdl.handle.net/21.15107/rcub_cer_7581 .

Bugarinović, Aleksandar, Srećković, Milesa, Tomić, Željka, Polić, Suzana R., Mamula - Tartalja, Danica, "Contemporary approach to the methods of contactless controls through contributions of modern investigations" in Book of Abstracts, Third International Conference Modern Methods of Testing and Evaluation in Science, NANT 2016, 24-25.12. 2016, Belgrade (2017):6-6,
https://hdl.handle.net/21.15107/rcub_cer_7581 .

TY  - CONF
AU  - Srećković, Milesa
AU  - Šašić, Rajko
AU  - Pelemiš, Svetlana
AU  - Bojanić, Slobodan
AU  - Polić, Suzana R.
PY  - 2017
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/7579
AB  - Application of quantum generators infiltrated in numerous areas including cultural heritage conservation. Issues arising are wide, starting from diagnostic and starting state validation (prediction of operational actions with various techniques) to operational actions using laser techniques in sanation / conservation / restoration. Possible techniques for enabling description of different characteristics of cultural heritage objects (complex scenes), from single simple characteristics (reflection, roughness, etc) to complex (material stress state, object's composition, for futher conservation and similar) are analysed in this paper. Stances, that devided measuring techniques in to destructive and nondestructive, in quantum generators areas have to be  revised, since even those resembling nondestructive types (LIBS, LIPS) end with microquantities of ejected material. The point of extraction could be chosen in a way not to disrrupt the main parts of the object, thus making even more meanningfull the application of laser techniques type mass spectroscopy, Raman and Rayleigh scattering. Special role have holographic and tomographic techniques and the experience of art objects with specific set of coherent light, brings special effects. For some long time a combination of holograms with art creations and for decades holograms are in museum's display items. This paper included and analyzed possible tasks based on linear and nonlinear effects. In vast number of possible (potential) quantum generators across electromagnetic spectra exist countless possibilities related to cultural heritage preservation. Nonlinear effects and roles in which by using stimulated effects and hypershort pulses are accquired new sources of (stimulated) gamma rays, neutrons and isotopes are potentially of great interest since dimensions of devices from those used for sterilization to drilling interventions and similar are significantly reduced.
AB  - Primena kvantnih generatora je prodrla u mnoge oblasti, pa i u očuvanje kulturne baštine. Zadaci koji se tu pojavljuju su vrlo širokog dijapazona, počevši od dijagnostike i ocene početnog stanja predmeta (predviđanja operativnih radnji raznim tehnikama) do operativnih radnji primenom laserskih tehnika u sanaciji / konzervaciji / restauraciji. U radu su analizirane moguće tehnike za ostvarenje deskripcije mnogih različitih karakteristika objekata kulturne baštine (kompleksne scene), od pojedinačnih jednostavnijih osobina (refleksija, hrapavost itd.) do složenijih (stanja napona materijala sastava objekata, radi dalje konzervacije i sl). Stavovi koji su podelili merne tehnike na destruktivne i nedestruktivne, u oblasti sa kvantnim generatorima, moraju da se menjaju, jer se i one intervencije koje su naizgled nedestruktivnog tipa (LIBS , LIP), završavaju sa mikronskim količinama iznetog materijala.
Kako se mesto uzimanja može izabrati, tako da ne narušava glavne delove objekta, to je od posebnog značaja primena laserskih tehnika – tipa masenih spektroskopija, Ramanovog i Rayleighevog rasejanja i sl. Posebnu ulogu imaju holografske i tomografske tehnike, a doživljaj umetničkih objekata uz specifičan tip koherentnog osvetljenja, donosi specijalne efekte. Odavno su nastajale kombinacije holografije uz umetničke tvorevine i decenijama su u prezentacijama muzeja holografije. U radu su zahvaćeni i analizirani mogući zadaci na bazi linearnih i nelinearnih efekata. U velikom broju mogućih (potencijalnih) kvantnih generatora po čitavom elektromagnetnom spektru, nalaze se nebrojene mogućnosti u vezi sa očuvanjem kulturne baštine. Nelinearni efekti i uloge u kojima se putem stimulisanih efekata i hiperkratkih impulsa dobijaju novi izvori (stimulisanih !?) gama zraka, neutrona i izotopa, su potencijalno od velikog interesa, jer se gabariti uređaja, od onih za sterilizaciju, do intervencija za bušenje i sl., znatno smanjuju.
PB  - Beograd: Centralni Institut za konzervaciju / Belgrade: Central Institute for Conservation
PB  - Beograd: Društvo za etičnost i vrednovanje u kulturi i nauci / Belgrade: Society for ethics and evaluation in culture and science
C3  - Contemporary support of technological sciences in cultural heritage preservation & ethical aspects - book of abstracts, selected papers and posters from the conference
T1  - Role of quantum generators in systems for cultural heritage in linear and nonlinear regimes
T1  - Uloga kvantnih generatora u sistemima od interesa za kulturnu baštinu u linearnim i nelinearnim efektima
SP  - 20
EP  - 21
UR  - https://hdl.handle.net/21.15107/rcub_cer_7579
ER  - 

@conference{
author = "Srećković, Milesa and Šašić, Rajko and Pelemiš, Svetlana and Bojanić, Slobodan and Polić, Suzana R.",
year = "2017",
abstract = "Application of quantum generators infiltrated in numerous areas including cultural heritage conservation. Issues arising are wide, starting from diagnostic and starting state validation (prediction of operational actions with various techniques) to operational actions using laser techniques in sanation / conservation / restoration. Possible techniques for enabling description of different characteristics of cultural heritage objects (complex scenes), from single simple characteristics (reflection, roughness, etc) to complex (material stress state, object's composition, for futher conservation and similar) are analysed in this paper. Stances, that devided measuring techniques in to destructive and nondestructive, in quantum generators areas have to be  revised, since even those resembling nondestructive types (LIBS, LIPS) end with microquantities of ejected material. The point of extraction could be chosen in a way not to disrrupt the main parts of the object, thus making even more meanningfull the application of laser techniques type mass spectroscopy, Raman and Rayleigh scattering. Special role have holographic and tomographic techniques and the experience of art objects with specific set of coherent light, brings special effects. For some long time a combination of holograms with art creations and for decades holograms are in museum's display items. This paper included and analyzed possible tasks based on linear and nonlinear effects. In vast number of possible (potential) quantum generators across electromagnetic spectra exist countless possibilities related to cultural heritage preservation. Nonlinear effects and roles in which by using stimulated effects and hypershort pulses are accquired new sources of (stimulated) gamma rays, neutrons and isotopes are potentially of great interest since dimensions of devices from those used for sterilization to drilling interventions and similar are significantly reduced., Primena kvantnih generatora je prodrla u mnoge oblasti, pa i u očuvanje kulturne baštine. Zadaci koji se tu pojavljuju su vrlo širokog dijapazona, počevši od dijagnostike i ocene početnog stanja predmeta (predviđanja operativnih radnji raznim tehnikama) do operativnih radnji primenom laserskih tehnika u sanaciji / konzervaciji / restauraciji. U radu su analizirane moguće tehnike za ostvarenje deskripcije mnogih različitih karakteristika objekata kulturne baštine (kompleksne scene), od pojedinačnih jednostavnijih osobina (refleksija, hrapavost itd.) do složenijih (stanja napona materijala sastava objekata, radi dalje konzervacije i sl). Stavovi koji su podelili merne tehnike na destruktivne i nedestruktivne, u oblasti sa kvantnim generatorima, moraju da se menjaju, jer se i one intervencije koje su naizgled nedestruktivnog tipa (LIBS , LIP), završavaju sa mikronskim količinama iznetog materijala.
Kako se mesto uzimanja može izabrati, tako da ne narušava glavne delove objekta, to je od posebnog značaja primena laserskih tehnika – tipa masenih spektroskopija, Ramanovog i Rayleighevog rasejanja i sl. Posebnu ulogu imaju holografske i tomografske tehnike, a doživljaj umetničkih objekata uz specifičan tip koherentnog osvetljenja, donosi specijalne efekte. Odavno su nastajale kombinacije holografije uz umetničke tvorevine i decenijama su u prezentacijama muzeja holografije. U radu su zahvaćeni i analizirani mogući zadaci na bazi linearnih i nelinearnih efekata. U velikom broju mogućih (potencijalnih) kvantnih generatora po čitavom elektromagnetnom spektru, nalaze se nebrojene mogućnosti u vezi sa očuvanjem kulturne baštine. Nelinearni efekti i uloge u kojima se putem stimulisanih efekata i hiperkratkih impulsa dobijaju novi izvori (stimulisanih !?) gama zraka, neutrona i izotopa, su potencijalno od velikog interesa, jer se gabariti uređaja, od onih za sterilizaciju, do intervencija za bušenje i sl., znatno smanjuju.",
publisher = "Beograd: Centralni Institut za konzervaciju / Belgrade: Central Institute for Conservation, Beograd: Društvo za etičnost i vrednovanje u kulturi i nauci / Belgrade: Society for ethics and evaluation in culture and science",
journal = "Contemporary support of technological sciences in cultural heritage preservation & ethical aspects - book of abstracts, selected papers and posters from the conference",
title = "Role of quantum generators in systems for cultural heritage in linear and nonlinear regimes, Uloga kvantnih generatora u sistemima od interesa za kulturnu baštinu u linearnim i nelinearnim efektima",
pages = "20-21",
url = "https://hdl.handle.net/21.15107/rcub_cer_7579"
}

Srećković, M., Šašić, R., Pelemiš, S., Bojanić, S.,& Polić, S. R.. (2017). Role of quantum generators in systems for cultural heritage in linear and nonlinear regimes. in Contemporary support of technological sciences in cultural heritage preservation & ethical aspects - book of abstracts, selected papers and posters from the conference
Beograd: Centralni Institut za konzervaciju / Belgrade: Central Institute for Conservation., 20-21.
https://hdl.handle.net/21.15107/rcub_cer_7579

Srećković M, Šašić R, Pelemiš S, Bojanić S, Polić SR. Role of quantum generators in systems for cultural heritage in linear and nonlinear regimes. in Contemporary support of technological sciences in cultural heritage preservation & ethical aspects - book of abstracts, selected papers and posters from the conference. 2017;:20-21.
https://hdl.handle.net/21.15107/rcub_cer_7579 .

Srećković, Milesa, Šašić, Rajko, Pelemiš, Svetlana, Bojanić, Slobodan, Polić, Suzana R., "Role of quantum generators in systems for cultural heritage in linear and nonlinear regimes" in Contemporary support of technological sciences in cultural heritage preservation & ethical aspects - book of abstracts, selected papers and posters from the conference (2017):20-21,
https://hdl.handle.net/21.15107/rcub_cer_7579 .

TY  - CONF
AU  - Srećković, Milesa
AU  - Tomić, Željka
AU  - Ostojić, Stanko
AU  - Polić, Suzana R.
AU  - Fidanovski, Zoran
AU  - Jevtić, Sanja
AU  - Milanović, Đorđe
AU  - Jevtić, Dragan
AU  - Bugarinović, Aleksandar
PY  - 2017
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/6593
AB  - Of the first laser application  in the field of preservation and diagnostics of cultural heritage, many tasks in the field of physical processes have been ended to today, which include interaction and dimensioning powder structures, controlling the work environment in the process of cleaning objects, as well as the applications of holographic, tomographic, interferent and diffraction and diffraction methods Diagnosticing, memory, authentication, etc. Some of the problems will be considered in this paper, including the necessary software support. The methods of laser cleaning of plaster objects based on literature were analyzed, and in given cases assess was distribution by the dimensions of powder and aerosol particles (analytical). The data obtained are digitized with appropriate software and prepared for further software processing for the sake of the characteristic functions of the distribution. Obtaining distribution is required to assess the protection measures due to risk, which implies dimensions of particles harmful to the human health. This area is directly associated with methods to obtain powders through lasers and apply thin layers, where the optimal working regime of the applied laser is of interest.
AB  - Od prvih primena lasera u području očuvanja i dijagnostike kulturne baštine, do danas je rešeno mnogo zadataka iz područja fizičkih procesa koji uključuju interakciju i dimenzionisanje praškastih struktura, kontrolisanje radne sredine u procesu čišćenja objekata, ali i primene holografskih, tomografskih, interferentnih i difrakcionih metoda za dijagnostikovanje, memorisanje, proveru autentičnosti i td. Neki od problema će biti razmatrani u ovom radu, uključujući i potrebne softverske podrške. Analizirane su metode laserskog čišćenja predmeta na bazi gipsa na osnovu literature i za date slučajeve ocenjena je distribucija po dimenzijama čestica praha i aerosola (analitički). Dobijeni podaci su digitalizovani odgovarajućim softverom i pripremljeni za dalju softversku obradu radi dobijanja karakterističnih funkcija raspodele. Dobijanje raspodele je potrebno za procenu mera zaštite usled rizika, koji podrazumeva dimenzije čestica štetnih za ljudski organizam. Ova se oblast direktno povezuje sa metodama za dobijanje prahova putem lasera i nanošenje tankih slojeva, gde je od interesa optimalan radni režim primenjenog lasera.
PB  - Beograd: Centralni Institut za konzervaciju / Belgrade: Central Institute for Conservation
PB  - Beograd: Društvo za etičnost i vrednovanje u kulturi i nauci / Belgrade: Society for ethics and evaluation in culture and science
C3  - Contemporary support of technological sciences in cultural heritage preservation & ethical aspects
T1  - Some tasks of laser techniques of interest for cultural heritage
T1  - Neki zadaci laserske tehnike od interesa za kulturnu baštinu
SP  - appendix 1
UR  - https://hdl.handle.net/21.15107/rcub_cer_6593
ER  - 

@conference{
author = "Srećković, Milesa and Tomić, Željka and Ostojić, Stanko and Polić, Suzana R. and Fidanovski, Zoran and Jevtić, Sanja and Milanović, Đorđe and Jevtić, Dragan and Bugarinović, Aleksandar",
year = "2017",
abstract = "Of the first laser application  in the field of preservation and diagnostics of cultural heritage, many tasks in the field of physical processes have been ended to today, which include interaction and dimensioning powder structures, controlling the work environment in the process of cleaning objects, as well as the applications of holographic, tomographic, interferent and diffraction and diffraction methods Diagnosticing, memory, authentication, etc. Some of the problems will be considered in this paper, including the necessary software support. The methods of laser cleaning of plaster objects based on literature were analyzed, and in given cases assess was distribution by the dimensions of powder and aerosol particles (analytical). The data obtained are digitized with appropriate software and prepared for further software processing for the sake of the characteristic functions of the distribution. Obtaining distribution is required to assess the protection measures due to risk, which implies dimensions of particles harmful to the human health. This area is directly associated with methods to obtain powders through lasers and apply thin layers, where the optimal working regime of the applied laser is of interest., Od prvih primena lasera u području očuvanja i dijagnostike kulturne baštine, do danas je rešeno mnogo zadataka iz područja fizičkih procesa koji uključuju interakciju i dimenzionisanje praškastih struktura, kontrolisanje radne sredine u procesu čišćenja objekata, ali i primene holografskih, tomografskih, interferentnih i difrakcionih metoda za dijagnostikovanje, memorisanje, proveru autentičnosti i td. Neki od problema će biti razmatrani u ovom radu, uključujući i potrebne softverske podrške. Analizirane su metode laserskog čišćenja predmeta na bazi gipsa na osnovu literature i za date slučajeve ocenjena je distribucija po dimenzijama čestica praha i aerosola (analitički). Dobijeni podaci su digitalizovani odgovarajućim softverom i pripremljeni za dalju softversku obradu radi dobijanja karakterističnih funkcija raspodele. Dobijanje raspodele je potrebno za procenu mera zaštite usled rizika, koji podrazumeva dimenzije čestica štetnih za ljudski organizam. Ova se oblast direktno povezuje sa metodama za dobijanje prahova putem lasera i nanošenje tankih slojeva, gde je od interesa optimalan radni režim primenjenog lasera.",
publisher = "Beograd: Centralni Institut za konzervaciju / Belgrade: Central Institute for Conservation, Beograd: Društvo za etičnost i vrednovanje u kulturi i nauci / Belgrade: Society for ethics and evaluation in culture and science",
journal = "Contemporary support of technological sciences in cultural heritage preservation & ethical aspects",
title = "Some tasks of laser techniques of interest for cultural heritage, Neki zadaci laserske tehnike od interesa za kulturnu baštinu",
pages = "appendix 1",
url = "https://hdl.handle.net/21.15107/rcub_cer_6593"
}

Srećković, M., Tomić, Ž., Ostojić, S., Polić, S. R., Fidanovski, Z., Jevtić, S., Milanović, Đ., Jevtić, D.,& Bugarinović, A.. (2017). Some tasks of laser techniques of interest for cultural heritage. in Contemporary support of technological sciences in cultural heritage preservation & ethical aspects
Beograd: Centralni Institut za konzervaciju / Belgrade: Central Institute for Conservation., appendix 1.
https://hdl.handle.net/21.15107/rcub_cer_6593

Srećković M, Tomić Ž, Ostojić S, Polić SR, Fidanovski Z, Jevtić S, Milanović Đ, Jevtić D, Bugarinović A. Some tasks of laser techniques of interest for cultural heritage. in Contemporary support of technological sciences in cultural heritage preservation & ethical aspects. 2017;:appendix 1.
https://hdl.handle.net/21.15107/rcub_cer_6593 .

Srećković, Milesa, Tomić, Željka, Ostojić, Stanko, Polić, Suzana R., Fidanovski, Zoran, Jevtić, Sanja, Milanović, Đorđe, Jevtić, Dragan, Bugarinović, Aleksandar, "Some tasks of laser techniques of interest for cultural heritage" in Contemporary support of technological sciences in cultural heritage preservation & ethical aspects (2017):appendix 1,
https://hdl.handle.net/21.15107/rcub_cer_6593 .

TY  - CONF
AU  - Petronić, Sanja
AU  - Milosavljević, Anđelka
AU  - Polić, Suzana R.
AU  - Srećković, Milesa
PY  - 2017
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/6462
AB  - The George Weifert Museum is a huge wealth of industrial and cultural heritage of Serbia. The brewery was founded in 1722 and 1840 it becomes the property of the Weifert family when its rapid development begins. Having completed the Higher Brewery School in Munich vicinity, and using the acquired knowledge, he founded one of the largest breweries in the Balkans. Technology for brewing beer and malt involves a large number of pressure vessels of various purposes and functions. Equipment for getting beer, about 300 years old, has long been out of service, some of the equipment was taken away, something broken, and much corroded. This work represents an effort and a call to help restore equipment and save from the time and oblivion. The technology and beer production line, which were amongst the most advanced technologies of that time, belong to the national heritage that we should be proud of. The work presented a heritological methodology of research of industrial heritage.
AB  - Muzej Đorđa Vajferta predstavlja značajno bogatstvo industrijske i kulturne baštine Srbije. Pivara je osnovana 1722. godine, a 1840. postaje vlasništvo porodice Vajfert kada i počinje nje nagli razvoj. Završivši Višu pivarsku školu u blizini Minhena i koristeći stečeno znanje, Vajfert osniva jednu od najvećih pivara na Balkanu. Tehnologija dobijanja piva i slada uključuje veliki broj posuda pod pritiskom različitih namena i funkcija. Oprema za dobijanje piva, stara oko 300 godina, odavno nije u funkciji, nešto od opreme je odnešeno, nešto polomljeno, a dosta toga korodiralo. Ovaj rad predstavlja jedan napor i poziv u pomoć da se oprema restaurira i sačuva od vremena i zaborava. Tehnologija i linija proizvodnje piva, koja je predstavljala jednu od najnaprednijih tehnologija tog vremena, spada u nacionalnu baštinu kojom bi morali da se ponosimo. U radu je primenjena heritološka metodologija istraživanja.
PB  - Beograd: Centralni Institut za konzervaciju / Belgrade: Central Institute for Conservation
PB  - Beograd: Društvo za etičnost i vrednovanje u kulturi i nauci / Belgrade: Society for ethics and evaluation in culture and science
C3  - Contemporary support of technological sciences in cultural heritage preservation & ethical aspects - book of abstracts, selected papers and posters from the conference
T1  - Pressure vessele at the George W. Weifert Museum
T1  - Posude pod pritiskom u Muzeju Đorđa Vajferta
SP  - 31
UR  - https://hdl.handle.net/21.15107/rcub_cer_6462
ER  - 

@conference{
author = "Petronić, Sanja and Milosavljević, Anđelka and Polić, Suzana R. and Srećković, Milesa",
year = "2017",
abstract = "The George Weifert Museum is a huge wealth of industrial and cultural heritage of Serbia. The brewery was founded in 1722 and 1840 it becomes the property of the Weifert family when its rapid development begins. Having completed the Higher Brewery School in Munich vicinity, and using the acquired knowledge, he founded one of the largest breweries in the Balkans. Technology for brewing beer and malt involves a large number of pressure vessels of various purposes and functions. Equipment for getting beer, about 300 years old, has long been out of service, some of the equipment was taken away, something broken, and much corroded. This work represents an effort and a call to help restore equipment and save from the time and oblivion. The technology and beer production line, which were amongst the most advanced technologies of that time, belong to the national heritage that we should be proud of. The work presented a heritological methodology of research of industrial heritage., Muzej Đorđa Vajferta predstavlja značajno bogatstvo industrijske i kulturne baštine Srbije. Pivara je osnovana 1722. godine, a 1840. postaje vlasništvo porodice Vajfert kada i počinje nje nagli razvoj. Završivši Višu pivarsku školu u blizini Minhena i koristeći stečeno znanje, Vajfert osniva jednu od najvećih pivara na Balkanu. Tehnologija dobijanja piva i slada uključuje veliki broj posuda pod pritiskom različitih namena i funkcija. Oprema za dobijanje piva, stara oko 300 godina, odavno nije u funkciji, nešto od opreme je odnešeno, nešto polomljeno, a dosta toga korodiralo. Ovaj rad predstavlja jedan napor i poziv u pomoć da se oprema restaurira i sačuva od vremena i zaborava. Tehnologija i linija proizvodnje piva, koja je predstavljala jednu od najnaprednijih tehnologija tog vremena, spada u nacionalnu baštinu kojom bi morali da se ponosimo. U radu je primenjena heritološka metodologija istraživanja.",
publisher = "Beograd: Centralni Institut za konzervaciju / Belgrade: Central Institute for Conservation, Beograd: Društvo za etičnost i vrednovanje u kulturi i nauci / Belgrade: Society for ethics and evaluation in culture and science",
journal = "Contemporary support of technological sciences in cultural heritage preservation & ethical aspects - book of abstracts, selected papers and posters from the conference",
title = "Pressure vessele at the George W. Weifert Museum, Posude pod pritiskom u Muzeju Đorđa Vajferta",
pages = "31",
url = "https://hdl.handle.net/21.15107/rcub_cer_6462"
}

Petronić, S., Milosavljević, A., Polić, S. R.,& Srećković, M.. (2017). Pressure vessele at the George W. Weifert Museum. in Contemporary support of technological sciences in cultural heritage preservation & ethical aspects - book of abstracts, selected papers and posters from the conference
Beograd: Centralni Institut za konzervaciju / Belgrade: Central Institute for Conservation., 31.
https://hdl.handle.net/21.15107/rcub_cer_6462

Petronić S, Milosavljević A, Polić SR, Srećković M. Pressure vessele at the George W. Weifert Museum. in Contemporary support of technological sciences in cultural heritage preservation & ethical aspects - book of abstracts, selected papers and posters from the conference. 2017;:31.
https://hdl.handle.net/21.15107/rcub_cer_6462 .

Petronić, Sanja, Milosavljević, Anđelka, Polić, Suzana R., Srećković, Milesa, "Pressure vessele at the George W. Weifert Museum" in Contemporary support of technological sciences in cultural heritage preservation & ethical aspects - book of abstracts, selected papers and posters from the conference (2017):31,
https://hdl.handle.net/21.15107/rcub_cer_6462 .

TY  - JOUR
AU  - Srećković, Milesa
AU  - Polić, Suzana R.
AU  - Jevtic, Sanja
AU  - Tomić, Željka
AU  - Milosavljević, Anđelka
PY  - 2017
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/7373
AB  - Uloga lidarskih tehnika i metoda sa kvantnim generatorima, a i optičkih metoda uopšte u očuvanju kulturne baštine i energetici, je i dalje u stalnom porastu. Ova izjava već mnogo godina samo menja nagib porasta, ali i dalje važi. Trend primene beskontaktnih metoda u mernim tehnikama je i dalje prisutan, gde uloge preuzimaju fotoni. Iako su i optičke metode već odavno prisutne u oblasti energetike, a sada i u oblasti kulturne baštine sa mnogo zadataka, uloge laserskih tehnika za daljinsku kontrolu ili za laboratorijske nalaze su pretrpele kvalitativne promene. Ako su se prvobitno kontrolisali daljinski parametri jedne vrste sada se ide na kontrole parametara različite vrste sa mnogo manjim brojem merenja. Povećavaju se rezolucije i krug mogućnosti pojedinih razvijenih lidarskih sistema.
U ovom radu su autori analizirali izabrane tehnike sa akcentom na ulozi lasera, i uočavali krug uključenih fundamentalnih procesa. Date analize su sadržane u postojećim primenama, a ukazane su i buduće potencijalne primene. Rad se bavi analizom složenijih i egzaktnijih zakonitosti, ali sagledava procese i sisteme i kroz praktična rešenja da bi se lakše ukazalo na manje poznate sprege, koje se mogu kroz paralelizam postojećih opisa mikrookolina primenjivati. Razmotreni su i softverski alati. S obzirom na širinu pojma i energetike i kulturne baštine i na potrebu da ove dve oblasti budu u pozitivnoj sprezi, rad razmatra paralelna istraživanja i stalne, buduće zadatke.
AB  - The role of LIDAR techniques and methods using quantum generators as well as optical methods in general for preservation of cultural heritage and power engine ering is in constant increase. This sttement for years changes only its incline but is still valid. The trend of contact less methods use in measuring techniques persists, where photons are taking over certain roles. Although, optical methods are present for long period of time in power engineering and know in cultural heritage preservation in numerous tasks. The useo f laser techniques for remote monitoring of for laboratory measurements suffered qualitative changes. If previously were monitored parameters of certain type, now this migrates to remote monitoring of different types of parameters with far less number of measurements. The resolutions are getting greater as well as the set of performances of developed lidar systems. In this paper authors analyzed chosen techniques accentuating lasers use, and identified the area of fundamental processes, thus being included. Given analysis are introduced relating to existing applications, pointing out future use. Paper deals with analysis of more complex and exact approaches, processes and systems trough optimal  solutions. Authors are pointing out less known feedbacks, which could be used for descriptions of micro and macro environments using parallel isms. Software tools are considered. Having in mind the vast area of power engineering and cultural heritage preservation and also the need for these areas to be in positive feedback, paper deals with parallel and specific investigations and constant and future tasks.
PB  - Beograd: Savez energetičara
T2  - Energija, ekonomija, ekologija
T1  - Specifične primene lidara u energetici i očuvanju kulturne baštine
T1  - Specific applications of LIDAR in energetic area and preservation of cultural heritage
VL  - XIX
IS  - 3-4
SP  - 312
EP  - 327
UR  - https://hdl.handle.net/21.15107/rcub_cer_7373
ER  - 

@article{
author = "Srećković, Milesa and Polić, Suzana R. and Jevtic, Sanja and Tomić, Željka and Milosavljević, Anđelka",
year = "2017",
abstract = "Uloga lidarskih tehnika i metoda sa kvantnim generatorima, a i optičkih metoda uopšte u očuvanju kulturne baštine i energetici, je i dalje u stalnom porastu. Ova izjava već mnogo godina samo menja nagib porasta, ali i dalje važi. Trend primene beskontaktnih metoda u mernim tehnikama je i dalje prisutan, gde uloge preuzimaju fotoni. Iako su i optičke metode već odavno prisutne u oblasti energetike, a sada i u oblasti kulturne baštine sa mnogo zadataka, uloge laserskih tehnika za daljinsku kontrolu ili za laboratorijske nalaze su pretrpele kvalitativne promene. Ako su se prvobitno kontrolisali daljinski parametri jedne vrste sada se ide na kontrole parametara različite vrste sa mnogo manjim brojem merenja. Povećavaju se rezolucije i krug mogućnosti pojedinih razvijenih lidarskih sistema.
U ovom radu su autori analizirali izabrane tehnike sa akcentom na ulozi lasera, i uočavali krug uključenih fundamentalnih procesa. Date analize su sadržane u postojećim primenama, a ukazane su i buduće potencijalne primene. Rad se bavi analizom složenijih i egzaktnijih zakonitosti, ali sagledava procese i sisteme i kroz praktična rešenja da bi se lakše ukazalo na manje poznate sprege, koje se mogu kroz paralelizam postojećih opisa mikrookolina primenjivati. Razmotreni su i softverski alati. S obzirom na širinu pojma i energetike i kulturne baštine i na potrebu da ove dve oblasti budu u pozitivnoj sprezi, rad razmatra paralelna istraživanja i stalne, buduće zadatke., The role of LIDAR techniques and methods using quantum generators as well as optical methods in general for preservation of cultural heritage and power engine ering is in constant increase. This sttement for years changes only its incline but is still valid. The trend of contact less methods use in measuring techniques persists, where photons are taking over certain roles. Although, optical methods are present for long period of time in power engineering and know in cultural heritage preservation in numerous tasks. The useo f laser techniques for remote monitoring of for laboratory measurements suffered qualitative changes. If previously were monitored parameters of certain type, now this migrates to remote monitoring of different types of parameters with far less number of measurements. The resolutions are getting greater as well as the set of performances of developed lidar systems. In this paper authors analyzed chosen techniques accentuating lasers use, and identified the area of fundamental processes, thus being included. Given analysis are introduced relating to existing applications, pointing out future use. Paper deals with analysis of more complex and exact approaches, processes and systems trough optimal  solutions. Authors are pointing out less known feedbacks, which could be used for descriptions of micro and macro environments using parallel isms. Software tools are considered. Having in mind the vast area of power engineering and cultural heritage preservation and also the need for these areas to be in positive feedback, paper deals with parallel and specific investigations and constant and future tasks.",
publisher = "Beograd: Savez energetičara",
journal = "Energija, ekonomija, ekologija",
title = "Specifične primene lidara u energetici i očuvanju kulturne baštine, Specific applications of LIDAR in energetic area and preservation of cultural heritage",
volume = "XIX",
number = "3-4",
pages = "312-327",
url = "https://hdl.handle.net/21.15107/rcub_cer_7373"
}

Srećković, M., Polić, S. R., Jevtic, S., Tomić, Ž.,& Milosavljević, A.. (2017). Specifične primene lidara u energetici i očuvanju kulturne baštine. in Energija, ekonomija, ekologija
Beograd: Savez energetičara., XIX(3-4), 312-327.
https://hdl.handle.net/21.15107/rcub_cer_7373

Srećković M, Polić SR, Jevtic S, Tomić Ž, Milosavljević A. Specifične primene lidara u energetici i očuvanju kulturne baštine. in Energija, ekonomija, ekologija. 2017;XIX(3-4):312-327.
https://hdl.handle.net/21.15107/rcub_cer_7373 .

Srećković, Milesa, Polić, Suzana R., Jevtic, Sanja, Tomić, Željka, Milosavljević, Anđelka, "Specifične primene lidara u energetici i očuvanju kulturne baštine" in Energija, ekonomija, ekologija, XIX, no. 3-4 (2017):312-327,
https://hdl.handle.net/21.15107/rcub_cer_7373 .

TY  - CONF
AU  - Srećković, Milesa
AU  - Polić, Suzana R.
AU  - Stević, Zoran
AU  - Kovačević, Aleksander
AU  - Vasić, Ružica
AU  - Karastojković, Zoran
AU  - Borna, Nada
AU  - Milanović, Srđan
AU  - Jevtić, Sanja
PY  - 2017
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/6452
AB  - U primeni koherentnog zračenja za dijagnostiku i čišćenje materijala od nataloženih slojeva sa objekata od značaja za kulturnu baštinu, koristi se nekoliko tipova lasera od kojih neki imaju po više izlaza. Nd3+:YAG laser (jednog sistema) se koristi na izlazima: 1,06 μm, 532 nm i 355 nm. Izabrani uzorci materijala različite prirode (keramike, papira, plastike, metala) su izlagani dejstvima prva tri izlaza u cilju uklanjanja neželjenih slojeva. Modeli su predstavljali objekte za procese u kojima se skida željeni sloj sa probnog uzorka tipa grafita, hemijske olovke, flomastera i markera. Pri svakom izlaganju, sniman je odgovarajući termovizijski zapis tako da postoji mogućnost provere modelovanja interakcije odabranog snopa sa materijalom i provera temperaturne distribucije putem simulacija analitičkim i numeričkim metodama sa raznim paketima programa (Numerics, Comsol, Zemax, Glad..).
AB  - In the application of coherent radiation for diagnostics and cleaning materials from the contaminated layers from the facilities of relevance to cultural heritage, several types of lasers are used, some of which have several outputs. ND3 +: YAG LASER (one system) is used on the outputs: 1.06 μm, 532 nm and 355 nm. Selected samples of materials of different nature (ceramics, paper, plastic, metals) are exposed to the effects of the first three outputs in order to remove unwanted layers. The models represented objects for processes in which the desired layer from the trial sample type of graphite type, ballpoint pen, flomaster and marker is removed. In each presentation, the corresponding thermal imaging is recorded so that there is a possibility of checking the interaction of the selected beam with materials and checking temperature distribution through simulations of analytical and numerical methods with various packages (Numerics, COMSOL, ZEMAX, HLAD ..).
PB  - Beograd: Centralni Institut za konzervaciju / Belgrade: Central Institute for Conservation
PB  - Sopot: Naučno društvo za razvoj i afirmaciju novih tehnologija / Sopot: Scientific Association for the Development and Promotion of New Technologies
C3  - Zbornik izvoda i izabrabnih radova Prvog nacionalnog naučno-stručnog skupa Multidisciplinarni pristup kulturnoj bastini, savremenim materijalima i tehnologijama, 03. Jun 2017, Beograd
T1  - Termovizijska analiza razvijenih temperatura na različitim tipovima materijala i zavisnost od talasne dužine upadnog laserskog snopa
T1  - Thessmovism analysis of developed temperatures on different types of materials and dependence on the wavelength of the incidental laser beam
VL  - I
SP  - 70
EP  - 83
UR  - https://hdl.handle.net/21.15107/rcub_cer_6452
ER  - 

@conference{
author = "Srećković, Milesa and Polić, Suzana R. and Stević, Zoran and Kovačević, Aleksander and Vasić, Ružica and Karastojković, Zoran and Borna, Nada and Milanović, Srđan and Jevtić, Sanja",
year = "2017",
abstract = "U primeni koherentnog zračenja za dijagnostiku i čišćenje materijala od nataloženih slojeva sa objekata od značaja za kulturnu baštinu, koristi se nekoliko tipova lasera od kojih neki imaju po više izlaza. Nd3+:YAG laser (jednog sistema) se koristi na izlazima: 1,06 μm, 532 nm i 355 nm. Izabrani uzorci materijala različite prirode (keramike, papira, plastike, metala) su izlagani dejstvima prva tri izlaza u cilju uklanjanja neželjenih slojeva. Modeli su predstavljali objekte za procese u kojima se skida željeni sloj sa probnog uzorka tipa grafita, hemijske olovke, flomastera i markera. Pri svakom izlaganju, sniman je odgovarajući termovizijski zapis tako da postoji mogućnost provere modelovanja interakcije odabranog snopa sa materijalom i provera temperaturne distribucije putem simulacija analitičkim i numeričkim metodama sa raznim paketima programa (Numerics, Comsol, Zemax, Glad..)., In the application of coherent radiation for diagnostics and cleaning materials from the contaminated layers from the facilities of relevance to cultural heritage, several types of lasers are used, some of which have several outputs. ND3 +: YAG LASER (one system) is used on the outputs: 1.06 μm, 532 nm and 355 nm. Selected samples of materials of different nature (ceramics, paper, plastic, metals) are exposed to the effects of the first three outputs in order to remove unwanted layers. The models represented objects for processes in which the desired layer from the trial sample type of graphite type, ballpoint pen, flomaster and marker is removed. In each presentation, the corresponding thermal imaging is recorded so that there is a possibility of checking the interaction of the selected beam with materials and checking temperature distribution through simulations of analytical and numerical methods with various packages (Numerics, COMSOL, ZEMAX, HLAD ..).",
publisher = "Beograd: Centralni Institut za konzervaciju / Belgrade: Central Institute for Conservation, Sopot: Naučno društvo za razvoj i afirmaciju novih tehnologija / Sopot: Scientific Association for the Development and Promotion of New Technologies",
journal = "Zbornik izvoda i izabrabnih radova Prvog nacionalnog naučno-stručnog skupa Multidisciplinarni pristup kulturnoj bastini, savremenim materijalima i tehnologijama, 03. Jun 2017, Beograd",
title = "Termovizijska analiza razvijenih temperatura na različitim tipovima materijala i zavisnost od talasne dužine upadnog laserskog snopa, Thessmovism analysis of developed temperatures on different types of materials and dependence on the wavelength of the incidental laser beam",
volume = "I",
pages = "70-83",
url = "https://hdl.handle.net/21.15107/rcub_cer_6452"
}

Srećković, M., Polić, S. R., Stević, Z., Kovačević, A., Vasić, R., Karastojković, Z., Borna, N., Milanović, S.,& Jevtić, S.. (2017). Termovizijska analiza razvijenih temperatura na različitim tipovima materijala i zavisnost od talasne dužine upadnog laserskog snopa. in Zbornik izvoda i izabrabnih radova Prvog nacionalnog naučno-stručnog skupa Multidisciplinarni pristup kulturnoj bastini, savremenim materijalima i tehnologijama, 03. Jun 2017, Beograd
Beograd: Centralni Institut za konzervaciju / Belgrade: Central Institute for Conservation., I, 70-83.
https://hdl.handle.net/21.15107/rcub_cer_6452

Srećković M, Polić SR, Stević Z, Kovačević A, Vasić R, Karastojković Z, Borna N, Milanović S, Jevtić S. Termovizijska analiza razvijenih temperatura na različitim tipovima materijala i zavisnost od talasne dužine upadnog laserskog snopa. in Zbornik izvoda i izabrabnih radova Prvog nacionalnog naučno-stručnog skupa Multidisciplinarni pristup kulturnoj bastini, savremenim materijalima i tehnologijama, 03. Jun 2017, Beograd. 2017;I:70-83.
https://hdl.handle.net/21.15107/rcub_cer_6452 .

Srećković, Milesa, Polić, Suzana R., Stević, Zoran, Kovačević, Aleksander, Vasić, Ružica, Karastojković, Zoran, Borna, Nada, Milanović, Srđan, Jevtić, Sanja, "Termovizijska analiza razvijenih temperatura na različitim tipovima materijala i zavisnost od talasne dužine upadnog laserskog snopa" in Zbornik izvoda i izabrabnih radova Prvog nacionalnog naučno-stručnog skupa Multidisciplinarni pristup kulturnoj bastini, savremenim materijalima i tehnologijama, 03. Jun 2017, Beograd, I (2017):70-83,
https://hdl.handle.net/21.15107/rcub_cer_6452 .

TY  - CONF
AU  - Srećković, Milesa
AU  - Barr-Mlinar, Ammy
AU  - Kričak, Lazar
AU  - Ostojić, Stanko
AU  - Polić, Suzana R.
AU  - Dragović, Magdalena
AU  - Čučaković, Aleksandar
PY  - 2017
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/6451
AB  - U istraživanju materijala u čvrstom stanju raznih gabarita, od relativno malih objekata do naslaga ispod građevina, ili uopšte, istorijski se, od potpuno nezavisnih metoda merenja iz oblasti mehaničkih ispitivanja, preko akustičkih (ultrazvuk), danas prešlo na nove metode koje uključuju optičke prilaze. Gotovo paralelna istraživanja u sprezi optike i akustike se i na molekularnom nivou (razblaženi i koncentrovani rastvori malih molekula i makromolekula, polimera, emulzije, micele) proučavaju putem procesa rasejanja laserskih snopova. Poslednji stadijum je vezan za metode merenja koherentnih snopova, koje vezuju i velika gustina snage i spektralna gustina i energije i snage.
Primena metoda talasne optike i razni stepeni kompleksnosti pojava, koje uključuju refleksiju, interferenciju i difrakciju (uz deskripciju polarizacije), već dugo podrazumeva specifične pristupe za profesionalna ispitivanja u mašinstvu i građevinarstvu. To znači da je s obzirom na širinu pojma kulturne baštine, sva ova iskustava je moguće iskoristi i za objekte kulturne baštine.
U radu se opisuju, vrši izbor i pokazuju neke mogućnosti metoda, gde se uz seizmiku pojavljuju laserske metode. Za posebna izvršena merenja akustičkih podataka o materijalu objekata kulturne baštine, vrši se procena njihovih mehaničkih osobina (elastičnih modula) i traži skup drugih konstanti koje će upotpuniti prirodu artefakta.
AB  - In the research of materials in solid state of various gabarits, from relatively small facilities to the deposits below buildings, or in general, historically, from fully independent measurement in the field of mechanical tests, through the acoustic (ultrasound) to new methods involving optical approaches. Almost parallel research in the optics and acoustics are also at the molecular level (diluted and concentrated solutions of small molecules and macromolecules, polymers, emulsions, miceles) are studied through the process of dispersion of laser beams. The last stage is related to the methods of measuring coherent beams, which also bind large density and spectral density and energy and power.
Application of the wave optics method and various degrees of complexity, which include reflection, interference and diffraction (with descriptions of polarization), has long imply specific approaches for professional testing in mechanical engineering and construction. This means that in view of the latitude of the term cultural heritage, all this experience can be used for cultural heritage facilities.
The paper describes, performs and show some possibilities of methods, where laser methods appear with seismic. For special measurements of acoustic data on the material of cultural heritage, the assessment of their mechanical properties (elastic modules) and requires a set of other constants that will complete the nature of the artifact.
PB  - Beograd: Centralni Institut za konzervaciju / Belgrade: Central Institute for Conservation
C3  - Zbornik izvoda i izabrabnih radova Prvog nacionalnog naučno-stručnog skupa Multidisciplinarni pristup kulturnoj bastini, savremenim materijalima i tehnologijama, 03. Jun 2017, Beograd
T1  - Savremene metode u daljinskoj i in situ definiciji materijala u raznim lokacijama od interesa za kulturnu baštinu
VL  - I
SP  - 84
EP  - 94
UR  - https://hdl.handle.net/21.15107/rcub_cer_6451
ER  - 

@conference{
author = "Srećković, Milesa and Barr-Mlinar, Ammy and Kričak, Lazar and Ostojić, Stanko and Polić, Suzana R. and Dragović, Magdalena and Čučaković, Aleksandar",
year = "2017",
abstract = "U istraživanju materijala u čvrstom stanju raznih gabarita, od relativno malih objekata do naslaga ispod građevina, ili uopšte, istorijski se, od potpuno nezavisnih metoda merenja iz oblasti mehaničkih ispitivanja, preko akustičkih (ultrazvuk), danas prešlo na nove metode koje uključuju optičke prilaze. Gotovo paralelna istraživanja u sprezi optike i akustike se i na molekularnom nivou (razblaženi i koncentrovani rastvori malih molekula i makromolekula, polimera, emulzije, micele) proučavaju putem procesa rasejanja laserskih snopova. Poslednji stadijum je vezan za metode merenja koherentnih snopova, koje vezuju i velika gustina snage i spektralna gustina i energije i snage.
Primena metoda talasne optike i razni stepeni kompleksnosti pojava, koje uključuju refleksiju, interferenciju i difrakciju (uz deskripciju polarizacije), već dugo podrazumeva specifične pristupe za profesionalna ispitivanja u mašinstvu i građevinarstvu. To znači da je s obzirom na širinu pojma kulturne baštine, sva ova iskustava je moguće iskoristi i za objekte kulturne baštine.
U radu se opisuju, vrši izbor i pokazuju neke mogućnosti metoda, gde se uz seizmiku pojavljuju laserske metode. Za posebna izvršena merenja akustičkih podataka o materijalu objekata kulturne baštine, vrši se procena njihovih mehaničkih osobina (elastičnih modula) i traži skup drugih konstanti koje će upotpuniti prirodu artefakta., In the research of materials in solid state of various gabarits, from relatively small facilities to the deposits below buildings, or in general, historically, from fully independent measurement in the field of mechanical tests, through the acoustic (ultrasound) to new methods involving optical approaches. Almost parallel research in the optics and acoustics are also at the molecular level (diluted and concentrated solutions of small molecules and macromolecules, polymers, emulsions, miceles) are studied through the process of dispersion of laser beams. The last stage is related to the methods of measuring coherent beams, which also bind large density and spectral density and energy and power.
Application of the wave optics method and various degrees of complexity, which include reflection, interference and diffraction (with descriptions of polarization), has long imply specific approaches for professional testing in mechanical engineering and construction. This means that in view of the latitude of the term cultural heritage, all this experience can be used for cultural heritage facilities.
The paper describes, performs and show some possibilities of methods, where laser methods appear with seismic. For special measurements of acoustic data on the material of cultural heritage, the assessment of their mechanical properties (elastic modules) and requires a set of other constants that will complete the nature of the artifact.",
publisher = "Beograd: Centralni Institut za konzervaciju / Belgrade: Central Institute for Conservation",
journal = "Zbornik izvoda i izabrabnih radova Prvog nacionalnog naučno-stručnog skupa Multidisciplinarni pristup kulturnoj bastini, savremenim materijalima i tehnologijama, 03. Jun 2017, Beograd",
title = "Savremene metode u daljinskoj i in situ definiciji materijala u raznim lokacijama od interesa za kulturnu baštinu",
volume = "I",
pages = "84-94",
url = "https://hdl.handle.net/21.15107/rcub_cer_6451"
}

Srećković, M., Barr-Mlinar, A., Kričak, L., Ostojić, S., Polić, S. R., Dragović, M.,& Čučaković, A.. (2017). Savremene metode u daljinskoj i in situ definiciji materijala u raznim lokacijama od interesa za kulturnu baštinu. in Zbornik izvoda i izabrabnih radova Prvog nacionalnog naučno-stručnog skupa Multidisciplinarni pristup kulturnoj bastini, savremenim materijalima i tehnologijama, 03. Jun 2017, Beograd
Beograd: Centralni Institut za konzervaciju / Belgrade: Central Institute for Conservation., I, 84-94.
https://hdl.handle.net/21.15107/rcub_cer_6451

Srećković M, Barr-Mlinar A, Kričak L, Ostojić S, Polić SR, Dragović M, Čučaković A. Savremene metode u daljinskoj i in situ definiciji materijala u raznim lokacijama od interesa za kulturnu baštinu. in Zbornik izvoda i izabrabnih radova Prvog nacionalnog naučno-stručnog skupa Multidisciplinarni pristup kulturnoj bastini, savremenim materijalima i tehnologijama, 03. Jun 2017, Beograd. 2017;I:84-94.
https://hdl.handle.net/21.15107/rcub_cer_6451 .

Srećković, Milesa, Barr-Mlinar, Ammy, Kričak, Lazar, Ostojić, Stanko, Polić, Suzana R., Dragović, Magdalena, Čučaković, Aleksandar, "Savremene metode u daljinskoj i in situ definiciji materijala u raznim lokacijama od interesa za kulturnu baštinu" in Zbornik izvoda i izabrabnih radova Prvog nacionalnog naučno-stručnog skupa Multidisciplinarni pristup kulturnoj bastini, savremenim materijalima i tehnologijama, 03. Jun 2017, Beograd, I (2017):84-94,
https://hdl.handle.net/21.15107/rcub_cer_6451 .

TY  - CONF
AU  - Srećković, Milesa
AU  - Jevtić, Sanja
AU  - Tomić, Željka
AU  - Đokić-Milošević, Biljana
AU  - Slavković, Nikola
AU  - Bugarinović, Aleksandar
AU  - Polić-Radovanović, Suzana R.
AU  - Knežević, Dragan
AU  - Fidanovski, Zoran
PY  - 2013
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/6386
AB  - Prema tipu primene lasera počinje se zadatak sa odabirom pogodnog kvantnog generatora, a zatim sledi koncepcija dizajna izabrane metode. Prema kompleksnosti sistema simuacije u procesu dizajniranja i procene uspešnosti, zamišljene koncepcije imaju veliku ulogu, pošto su cene razvoja sistema često u širokim granicama. U radu se razmatraju izabrani zahtevi i algoritmi, koji ih prate, kao delovi programskih paketa ili pojedinačno razvijenih sopstvenih rešenja. Izabrane su problematike iz dizajna sistema primene lasera kod interferometara, neki lidarski – ekološki problemi, i problematika kontrole požara, koja se ostvaruje primenom lidarskih sistema.
AB  - The task of the laser application start with selection of adequate quantum generator, and the second step is the design of a chosen method. The wide cost range of the system development and simulation complexity in the designing process, result in the overall evaluation of conception efficiency. The chosen demandes and according algorithms as well as software packages, or own software solutions are presented in this paper. Design problems of laser systems in interferometers, some lidar-ecology applications, and the fire detection and monitoring accomplished by lidar systems, are analysed, too.
PB  - Istočno Sarajevo: Elektrotehnički fakultet
C3  - XII međunarodni naučno-stručni simpozijum INFOTEH-JAHORINA 2013
T1  - Simulacione metode u pristupu projektovanju  lasera od interesa u ekologiji
T1  - Simulation methods approach to designing lasers of interest in ecology
VL  - XII
SP  - 478
EP  - 483
UR  - https://hdl.handle.net/21.15107/rcub_cer_6386
ER  - 

@conference{
author = "Srećković, Milesa and Jevtić, Sanja and Tomić, Željka and Đokić-Milošević, Biljana and Slavković, Nikola and Bugarinović, Aleksandar and Polić-Radovanović, Suzana R. and Knežević, Dragan and Fidanovski, Zoran",
year = "2013",
abstract = "Prema tipu primene lasera počinje se zadatak sa odabirom pogodnog kvantnog generatora, a zatim sledi koncepcija dizajna izabrane metode. Prema kompleksnosti sistema simuacije u procesu dizajniranja i procene uspešnosti, zamišljene koncepcije imaju veliku ulogu, pošto su cene razvoja sistema često u širokim granicama. U radu se razmatraju izabrani zahtevi i algoritmi, koji ih prate, kao delovi programskih paketa ili pojedinačno razvijenih sopstvenih rešenja. Izabrane su problematike iz dizajna sistema primene lasera kod interferometara, neki lidarski – ekološki problemi, i problematika kontrole požara, koja se ostvaruje primenom lidarskih sistema., The task of the laser application start with selection of adequate quantum generator, and the second step is the design of a chosen method. The wide cost range of the system development and simulation complexity in the designing process, result in the overall evaluation of conception efficiency. The chosen demandes and according algorithms as well as software packages, or own software solutions are presented in this paper. Design problems of laser systems in interferometers, some lidar-ecology applications, and the fire detection and monitoring accomplished by lidar systems, are analysed, too.",
publisher = "Istočno Sarajevo: Elektrotehnički fakultet",
journal = "XII međunarodni naučno-stručni simpozijum INFOTEH-JAHORINA 2013",
title = "Simulacione metode u pristupu projektovanju  lasera od interesa u ekologiji, Simulation methods approach to designing lasers of interest in ecology",
volume = "XII",
pages = "478-483",
url = "https://hdl.handle.net/21.15107/rcub_cer_6386"
}

Srećković, M., Jevtić, S., Tomić, Ž., Đokić-Milošević, B., Slavković, N., Bugarinović, A., Polić-Radovanović, S. R., Knežević, D.,& Fidanovski, Z.. (2013). Simulacione metode u pristupu projektovanju  lasera od interesa u ekologiji. in XII međunarodni naučno-stručni simpozijum INFOTEH-JAHORINA 2013
Istočno Sarajevo: Elektrotehnički fakultet., XII, 478-483.
https://hdl.handle.net/21.15107/rcub_cer_6386

Srećković M, Jevtić S, Tomić Ž, Đokić-Milošević B, Slavković N, Bugarinović A, Polić-Radovanović SR, Knežević D, Fidanovski Z. Simulacione metode u pristupu projektovanju  lasera od interesa u ekologiji. in XII međunarodni naučno-stručni simpozijum INFOTEH-JAHORINA 2013. 2013;XII:478-483.
https://hdl.handle.net/21.15107/rcub_cer_6386 .

Srećković, Milesa, Jevtić, Sanja, Tomić, Željka, Đokić-Milošević, Biljana, Slavković, Nikola, Bugarinović, Aleksandar, Polić-Radovanović, Suzana R., Knežević, Dragan, Fidanovski, Zoran, "Simulacione metode u pristupu projektovanju  lasera od interesa u ekologiji" in XII međunarodni naučno-stručni simpozijum INFOTEH-JAHORINA 2013, XII (2013):478-483,
https://hdl.handle.net/21.15107/rcub_cer_6386 .

TY  - CONF
AU  - Srećković, Milesa
AU  - Tomić, Željka
AU  - Bojanić, Slobodan
AU  - Krčum, Dušan
AU  - Janićijević, Milovan
AU  - Bugarinović, Aleksandar
AU  - Polić-Radovanović, Suzana R.
AU  - Milić, Saša
AU  - Simić, Biljana
PY  - 2012
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/6388
AB  - Savremena problematika vezana za kvantne generatore u optičkom i RF delu spektra traži kao eksperimentalnu podršku vrlo kompleksne i skupe sisteme i komponente. Zbog toga su računarske simulacije neizbežne u osnovi razvoja mnogih sistema. U radu se autori bave problematikom dizajna optičkih vlakana i drugih komponenata u svrhe modulacija i simulacija u makroskopskim komponentama optičkih sistema. U drugom delu rada se primenom softverskih aplikacija ocenjuju eksperimentalni rezultati interakcije sa kvantnim generatorima na odabranoj vrsti materijala.
AB  - Contemporary issues related to the quantum generators in the optical and RF spectral ranges required as part of the experimental support very complex and expensive systems and
components. Therefore, the simulation is basically inevitable development of many systems. The authors deal with the problem of design of optical fiber and other components for the purpose of modulation and simulation of optical components in macroscopic systems in this paper. In the second part of it the application of other software types applications evaluated experimental results of interaction for selected type of material with the quantum generators.
PB  - Istočno Sarajevo : Elektrotehnički fakultet
C3  - Zbornik radova - XI  međunarodni naučno-stručni simpozijum Infoteh-Jahorina 2012, Jahorina
T1  - Savremeni problemi prostiranja i interakcije kvantnih generatora sa materijalom
T1  - Contemporary problems of transmission and interaction of quantum generators with material
VL  - 11
SP  - 458
EP  - 463
UR  - https://hdl.handle.net/21.15107/rcub_cer_6388
ER  - 

@conference{
author = "Srećković, Milesa and Tomić, Željka and Bojanić, Slobodan and Krčum, Dušan and Janićijević, Milovan and Bugarinović, Aleksandar and Polić-Radovanović, Suzana R. and Milić, Saša and Simić, Biljana",
year = "2012",
abstract = "Savremena problematika vezana za kvantne generatore u optičkom i RF delu spektra traži kao eksperimentalnu podršku vrlo kompleksne i skupe sisteme i komponente. Zbog toga su računarske simulacije neizbežne u osnovi razvoja mnogih sistema. U radu se autori bave problematikom dizajna optičkih vlakana i drugih komponenata u svrhe modulacija i simulacija u makroskopskim komponentama optičkih sistema. U drugom delu rada se primenom softverskih aplikacija ocenjuju eksperimentalni rezultati interakcije sa kvantnim generatorima na odabranoj vrsti materijala., Contemporary issues related to the quantum generators in the optical and RF spectral ranges required as part of the experimental support very complex and expensive systems and
components. Therefore, the simulation is basically inevitable development of many systems. The authors deal with the problem of design of optical fiber and other components for the purpose of modulation and simulation of optical components in macroscopic systems in this paper. In the second part of it the application of other software types applications evaluated experimental results of interaction for selected type of material with the quantum generators.",
publisher = "Istočno Sarajevo : Elektrotehnički fakultet",
journal = "Zbornik radova - XI  međunarodni naučno-stručni simpozijum Infoteh-Jahorina 2012, Jahorina",
title = "Savremeni problemi prostiranja i interakcije kvantnih generatora sa materijalom, Contemporary problems of transmission and interaction of quantum generators with material",
volume = "11",
pages = "458-463",
url = "https://hdl.handle.net/21.15107/rcub_cer_6388"
}

Srećković, M., Tomić, Ž., Bojanić, S., Krčum, D., Janićijević, M., Bugarinović, A., Polić-Radovanović, S. R., Milić, S.,& Simić, B.. (2012). Savremeni problemi prostiranja i interakcije kvantnih generatora sa materijalom. in Zbornik radova - XI  međunarodni naučno-stručni simpozijum Infoteh-Jahorina 2012, Jahorina
Istočno Sarajevo : Elektrotehnički fakultet., 11, 458-463.
https://hdl.handle.net/21.15107/rcub_cer_6388

Srećković M, Tomić Ž, Bojanić S, Krčum D, Janićijević M, Bugarinović A, Polić-Radovanović SR, Milić S, Simić B. Savremeni problemi prostiranja i interakcije kvantnih generatora sa materijalom. in Zbornik radova - XI  međunarodni naučno-stručni simpozijum Infoteh-Jahorina 2012, Jahorina. 2012;11:458-463.
https://hdl.handle.net/21.15107/rcub_cer_6388 .

Srećković, Milesa, Tomić, Željka, Bojanić, Slobodan, Krčum, Dušan, Janićijević, Milovan, Bugarinović, Aleksandar, Polić-Radovanović, Suzana R., Milić, Saša, Simić, Biljana, "Savremeni problemi prostiranja i interakcije kvantnih generatora sa materijalom" in Zbornik radova - XI  međunarodni naučno-stručni simpozijum Infoteh-Jahorina 2012, Jahorina, 11 (2012):458-463,
https://hdl.handle.net/21.15107/rcub_cer_6388 .

TY  - CONF
AU  - Polić-Radovanović, Suzana R.
AU  - Petronić, Sanja
AU  - Milosavljević, Anđelka
AU  - Srećković, Milesa
AU  - Milosavljević, Milan
AU  - Milosavljević, Jelena
PY  - 2012
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/6595
AB  - The traditional technologies are an important part in the protection of cultural heritage, because technological development always confirm the processes of defining of the different cultures identity. In this paper, in the context of sustainable development and environmental protection, we present the study of classical and innovative conservation model of traditional technology based on the examples Tripitaka Koreana, and works of British researchers Tim Noble, Sue Webster and David Clarke.
PB  - Užice: High Business-Technical School of Užice
C3  - Proceedings - 5th International Conference "Science and Higher Education in Function of Sustainable Development" – SED 2012, 04-05/10/2012, Užice, Serbia
T1  - Traditional technology, innovation and sustainable development
SP  - 166
EP  - 170
UR  - https://hdl.handle.net/21.15107/rcub_cer_6595
ER  - 

@conference{
author = "Polić-Radovanović, Suzana R. and Petronić, Sanja and Milosavljević, Anđelka and Srećković, Milesa and Milosavljević, Milan and Milosavljević, Jelena",
year = "2012",
abstract = "The traditional technologies are an important part in the protection of cultural heritage, because technological development always confirm the processes of defining of the different cultures identity. In this paper, in the context of sustainable development and environmental protection, we present the study of classical and innovative conservation model of traditional technology based on the examples Tripitaka Koreana, and works of British researchers Tim Noble, Sue Webster and David Clarke.",
publisher = "Užice: High Business-Technical School of Užice",
journal = "Proceedings - 5th International Conference "Science and Higher Education in Function of Sustainable Development" – SED 2012, 04-05/10/2012, Užice, Serbia",
title = "Traditional technology, innovation and sustainable development",
pages = "166-170",
url = "https://hdl.handle.net/21.15107/rcub_cer_6595"
}

Polić-Radovanović, S. R., Petronić, S., Milosavljević, A., Srećković, M., Milosavljević, M.,& Milosavljević, J.. (2012). Traditional technology, innovation and sustainable development. in Proceedings - 5th International Conference "Science and Higher Education in Function of Sustainable Development" – SED 2012, 04-05/10/2012, Užice, Serbia
Užice: High Business-Technical School of Užice., 166-170.
https://hdl.handle.net/21.15107/rcub_cer_6595

Polić-Radovanović SR, Petronić S, Milosavljević A, Srećković M, Milosavljević M, Milosavljević J. Traditional technology, innovation and sustainable development. in Proceedings - 5th International Conference "Science and Higher Education in Function of Sustainable Development" – SED 2012, 04-05/10/2012, Užice, Serbia. 2012;:166-170.
https://hdl.handle.net/21.15107/rcub_cer_6595 .

Polić-Radovanović, Suzana R., Petronić, Sanja, Milosavljević, Anđelka, Srećković, Milesa, Milosavljević, Milan, Milosavljević, Jelena, "Traditional technology, innovation and sustainable development" in Proceedings - 5th International Conference "Science and Higher Education in Function of Sustainable Development" – SED 2012, 04-05/10/2012, Užice, Serbia (2012):166-170,
https://hdl.handle.net/21.15107/rcub_cer_6595 .

TY  - CHAP
AU  - Srećković, Milesa
AU  - Polić-Radovanović, Suzana R.
AU  - Kovačević, Aleksander G.
PY  - 2012
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/6398
AB  - Laser application in cleane and processing of ornamental artwork (artifacts) has specific demands concerning laser interaction artistic materials. In this paper, the relationship between geometric structural principles of artwork and laser action in selected regime is discussed and analyzed.
PB  - Firenze: Fondazione Giorgio Ronchi, fondata da Vasco Ronchi
T2  - Atti della “Fondazione Giorgio Ronchi”
T1  - Problem of synchronization of geometric aspects in laser processing of modular structure in art
VL  - LXVII
IS  - 1
SP  - 93
EP  - 102
UR  - https://hdl.handle.net/21.15107/rcub_cer_6398
ER  - 

@inbook{
author = "Srećković, Milesa and Polić-Radovanović, Suzana R. and Kovačević, Aleksander G.",
year = "2012",
abstract = "Laser application in cleane and processing of ornamental artwork (artifacts) has specific demands concerning laser interaction artistic materials. In this paper, the relationship between geometric structural principles of artwork and laser action in selected regime is discussed and analyzed.",
publisher = "Firenze: Fondazione Giorgio Ronchi, fondata da Vasco Ronchi",
journal = "Atti della “Fondazione Giorgio Ronchi”",
booktitle = "Problem of synchronization of geometric aspects in laser processing of modular structure in art",
volume = "LXVII",
number = "1",
pages = "93-102",
url = "https://hdl.handle.net/21.15107/rcub_cer_6398"
}

Srećković, M., Polić-Radovanović, S. R.,& Kovačević, A. G.. (2012). Problem of synchronization of geometric aspects in laser processing of modular structure in art. in Atti della “Fondazione Giorgio Ronchi”
Firenze: Fondazione Giorgio Ronchi, fondata da Vasco Ronchi., LXVII(1), 93-102.
https://hdl.handle.net/21.15107/rcub_cer_6398

Srećković M, Polić-Radovanović SR, Kovačević AG. Problem of synchronization of geometric aspects in laser processing of modular structure in art. in Atti della “Fondazione Giorgio Ronchi”. 2012;LXVII(1):93-102.
https://hdl.handle.net/21.15107/rcub_cer_6398 .

Srećković, Milesa, Polić-Radovanović, Suzana R., Kovačević, Aleksander G., "Problem of synchronization of geometric aspects in laser processing of modular structure in art" in Atti della “Fondazione Giorgio Ronchi”, LXVII, no. 1 (2012):93-102,
https://hdl.handle.net/21.15107/rcub_cer_6398 .

TY  - CONF
AU  - Polić-Radovanović, Suzana R.
AU  - Srećković, Milesa
AU  - Janjušević, Ljubinko
PY  - 2012
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/6032
AB  - The application of robots in anthropological research in archeology is one of the new features for the introduction of automation in the creation of databases from different periods of cultural history. In this paper, we present  the analysis on basis of conservation research on artifacts from the archaeological site of Kale-Krševica in Serbia (fourth century BC), where, during the creation of documentation revealed the possibility for a new class of data from the field of anthropology. Bearing in mind that around the world there are a large number of pottery and artifacts on which it could be done the same study, the introduction of robots that using modern methods of diagnosis would greatly could contribute to the developing of a new paradigm in archeology.
PB  - Italy : International Conference “Robotic innovation for Cultural Heritage“
C3  - 1st  International Conference  “Robotic  innovation for Cultural Heritage“ RICH 2012, 3-4 December 2012, Venice
T1  - Robotics and  Anthropological Research in Archaeology
VL  - I
UR  - https://hdl.handle.net/21.15107/rcub_cer_6032
ER  - 

@conference{
author = "Polić-Radovanović, Suzana R. and Srećković, Milesa and Janjušević, Ljubinko",
year = "2012",
abstract = "The application of robots in anthropological research in archeology is one of the new features for the introduction of automation in the creation of databases from different periods of cultural history. In this paper, we present  the analysis on basis of conservation research on artifacts from the archaeological site of Kale-Krševica in Serbia (fourth century BC), where, during the creation of documentation revealed the possibility for a new class of data from the field of anthropology. Bearing in mind that around the world there are a large number of pottery and artifacts on which it could be done the same study, the introduction of robots that using modern methods of diagnosis would greatly could contribute to the developing of a new paradigm in archeology.",
publisher = "Italy : International Conference “Robotic innovation for Cultural Heritage“",
journal = "1st  International Conference  “Robotic  innovation for Cultural Heritage“ RICH 2012, 3-4 December 2012, Venice",
title = "Robotics and  Anthropological Research in Archaeology",
volume = "I",
url = "https://hdl.handle.net/21.15107/rcub_cer_6032"
}

Polić-Radovanović, S. R., Srećković, M.,& Janjušević, L.. (2012). Robotics and  Anthropological Research in Archaeology. in 1st  International Conference  “Robotic  innovation for Cultural Heritage“ RICH 2012, 3-4 December 2012, Venice
Italy : International Conference “Robotic innovation for Cultural Heritage“., I.
https://hdl.handle.net/21.15107/rcub_cer_6032

Polić-Radovanović SR, Srećković M, Janjušević L. Robotics and  Anthropological Research in Archaeology. in 1st  International Conference  “Robotic  innovation for Cultural Heritage“ RICH 2012, 3-4 December 2012, Venice. 2012;I.
https://hdl.handle.net/21.15107/rcub_cer_6032 .

Polić-Radovanović, Suzana R., Srećković, Milesa, Janjušević, Ljubinko, "Robotics and  Anthropological Research in Archaeology" in 1st  International Conference  “Robotic  innovation for Cultural Heritage“ RICH 2012, 3-4 December 2012, Venice, I (2012),
https://hdl.handle.net/21.15107/rcub_cer_6032 .

TY  - CONF
AU  - Tomić, Željka
AU  - Srećković, Milesa
AU  - Polić-Radovanović, Suzana R.
AU  - Lukić, Lazar
AU  - Kovačević, Aleksander
AU  - Dinulović, Mirko
AU  - Janićijević, Milovan
PY  - 2011
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/6399
AB  - Chosen ceramic materials of laboratory products important for microelectronics, microwave techniques and medical applications, have been exposed to pulsed laser beams in various regimes of operation (free generation, Q-switched and femto second regimes are included with different frequencies and number of pulses). Characteristic damages in these regimes are analyzed by the techniques of SEM, optical microscopy, micro hardness, etc. Obtained micrographs later served for image analysis by using quantification methods and corresponding tools for image processing. According to chosen processing, the information on the source itself (the laser), and power distribution in the beam, material resistance (hardness) to fluencies can be obtained.
PB  - Belgrade: The Serbian Ceramic Society
PB  - Belgrade: Vinča Institute of Nuclear Sciences, University of Belgrade
PB  - Belgrade: Institute for Multidisciplinary research, University of Belgrade
PB  - Zemun: Institute of Physics, University of Belgrade
C3  - Program and the Book of Abstracts - 1st Conference of the Serbian Ceramic Society – 1CSCS 2011, March 17.-18. 2011., Belgrade, Serbia
T1  - Characteristics of the laser interaction with chosen ceramic materials
SP  - 38
UR  - https://hdl.handle.net/21.15107/rcub_cer_6399
ER  - 

@conference{
author = "Tomić, Željka and Srećković, Milesa and Polić-Radovanović, Suzana R. and Lukić, Lazar and Kovačević, Aleksander and Dinulović, Mirko and Janićijević, Milovan",
year = "2011",
abstract = "Chosen ceramic materials of laboratory products important for microelectronics, microwave techniques and medical applications, have been exposed to pulsed laser beams in various regimes of operation (free generation, Q-switched and femto second regimes are included with different frequencies and number of pulses). Characteristic damages in these regimes are analyzed by the techniques of SEM, optical microscopy, micro hardness, etc. Obtained micrographs later served for image analysis by using quantification methods and corresponding tools for image processing. According to chosen processing, the information on the source itself (the laser), and power distribution in the beam, material resistance (hardness) to fluencies can be obtained.",
publisher = "Belgrade: The Serbian Ceramic Society, Belgrade: Vinča Institute of Nuclear Sciences, University of Belgrade, Belgrade: Institute for Multidisciplinary research, University of Belgrade, Zemun: Institute of Physics, University of Belgrade",
journal = "Program and the Book of Abstracts - 1st Conference of the Serbian Ceramic Society – 1CSCS 2011, March 17.-18. 2011., Belgrade, Serbia",
title = "Characteristics of the laser interaction with chosen ceramic materials",
pages = "38",
url = "https://hdl.handle.net/21.15107/rcub_cer_6399"
}

Tomić, Ž., Srećković, M., Polić-Radovanović, S. R., Lukić, L., Kovačević, A., Dinulović, M.,& Janićijević, M.. (2011). Characteristics of the laser interaction with chosen ceramic materials. in Program and the Book of Abstracts - 1st Conference of the Serbian Ceramic Society – 1CSCS 2011, March 17.-18. 2011., Belgrade, Serbia
Belgrade: The Serbian Ceramic Society., 38.
https://hdl.handle.net/21.15107/rcub_cer_6399

Tomić Ž, Srećković M, Polić-Radovanović SR, Lukić L, Kovačević A, Dinulović M, Janićijević M. Characteristics of the laser interaction with chosen ceramic materials. in Program and the Book of Abstracts - 1st Conference of the Serbian Ceramic Society – 1CSCS 2011, March 17.-18. 2011., Belgrade, Serbia. 2011;:38.
https://hdl.handle.net/21.15107/rcub_cer_6399 .

Tomić, Željka, Srećković, Milesa, Polić-Radovanović, Suzana R., Lukić, Lazar, Kovačević, Aleksander, Dinulović, Mirko, Janićijević, Milovan, "Characteristics of the laser interaction with chosen ceramic materials" in Program and the Book of Abstracts - 1st Conference of the Serbian Ceramic Society – 1CSCS 2011, March 17.-18. 2011., Belgrade, Serbia (2011):38,
https://hdl.handle.net/21.15107/rcub_cer_6399 .

TY  - CONF
AU  - Polić-Radovanović, Suzana R.
AU  - Srećković, Milesa
AU  - Milosavljević, Milan
PY  - 2011
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/7385
AB  - Savremene tehnologije nalaze veliku primenu u oblasti zaštite kulturne baštine. Posebno interesantno polje odnosi se na izradu „beskontaktnih“ replika umetničkih i arheoloških predmeta, kao i na restauraciju oštećenih spomenika kulture i industrijske baštine. U radu je predstavljeno istraživanje semantike primena tehnika 3D laserskog skeniranja, CAD / CAM i CNC tehnologija u zaštiti kulturne baštine u kontekstu postindustrijskog društva.
AB  - The modern technologies are widely applaid in the field of cultural heritage. Particulary interesting field related to the production of „contactless“ replicas of art and archaeological objects, as well as the restoration of damaged cultural monuments and industrial heritage. This paper presents the research of semantics of the application of research techniques 3D laser scanning, CAD / CAM and CNC technology to protect cultural heritage in the context of postindustrial society.
PB  - Beograd: Univerzitet u Beogradu - Mašinski fakultet / Belgrade: University of Belgrade - Faculty of Mechanical Engineering
C3  - Proceedings - 24th simposium in 37th JUPITER CONFERENCE with foreign participants
T1  - 3D lasersko skeniranje, CAD / CAM i CNC tehnologije u zaštiti kulturne baštine
T1  - 3D Laser Scanning, CAD / CAM and CNC Technology in the field of Cultural Heritage
SP  - 2.74
EP  - 2.79
UR  - https://hdl.handle.net/21.15107/rcub_cer_7385
ER  - 

@conference{
author = "Polić-Radovanović, Suzana R. and Srećković, Milesa and Milosavljević, Milan",
year = "2011",
abstract = "Savremene tehnologije nalaze veliku primenu u oblasti zaštite kulturne baštine. Posebno interesantno polje odnosi se na izradu „beskontaktnih“ replika umetničkih i arheoloških predmeta, kao i na restauraciju oštećenih spomenika kulture i industrijske baštine. U radu je predstavljeno istraživanje semantike primena tehnika 3D laserskog skeniranja, CAD / CAM i CNC tehnologija u zaštiti kulturne baštine u kontekstu postindustrijskog društva., The modern technologies are widely applaid in the field of cultural heritage. Particulary interesting field related to the production of „contactless“ replicas of art and archaeological objects, as well as the restoration of damaged cultural monuments and industrial heritage. This paper presents the research of semantics of the application of research techniques 3D laser scanning, CAD / CAM and CNC technology to protect cultural heritage in the context of postindustrial society.",
publisher = "Beograd: Univerzitet u Beogradu - Mašinski fakultet / Belgrade: University of Belgrade - Faculty of Mechanical Engineering",
journal = "Proceedings - 24th simposium in 37th JUPITER CONFERENCE with foreign participants",
title = "3D lasersko skeniranje, CAD / CAM i CNC tehnologije u zaštiti kulturne baštine, 3D Laser Scanning, CAD / CAM and CNC Technology in the field of Cultural Heritage",
pages = "2.74-2.79",
url = "https://hdl.handle.net/21.15107/rcub_cer_7385"
}

Polić-Radovanović, S. R., Srećković, M.,& Milosavljević, M.. (2011). 3D lasersko skeniranje, CAD / CAM i CNC tehnologije u zaštiti kulturne baštine. in Proceedings - 24th simposium in 37th JUPITER CONFERENCE with foreign participants
Beograd: Univerzitet u Beogradu - Mašinski fakultet / Belgrade: University of Belgrade - Faculty of Mechanical Engineering., 2.74-2.79.
https://hdl.handle.net/21.15107/rcub_cer_7385

Polić-Radovanović SR, Srećković M, Milosavljević M. 3D lasersko skeniranje, CAD / CAM i CNC tehnologije u zaštiti kulturne baštine. in Proceedings - 24th simposium in 37th JUPITER CONFERENCE with foreign participants. 2011;:2.74-2.79.
https://hdl.handle.net/21.15107/rcub_cer_7385 .

Polić-Radovanović, Suzana R., Srećković, Milesa, Milosavljević, Milan, "3D lasersko skeniranje, CAD / CAM i CNC tehnologije u zaštiti kulturne baštine" in Proceedings - 24th simposium in 37th JUPITER CONFERENCE with foreign participants (2011):2.74-2.79,
https://hdl.handle.net/21.15107/rcub_cer_7385 .

TY  - CONF
AU  - Srećković, Milesa
AU  - Tomić, Željka
AU  - Fidanovski, Zoran
AU  - Polić-Radovanović, Suzana R.
AU  - Bugarinović, Aleksandar
AU  - Marković-Petrović, Jasna
AU  - Lukić, Lazar
AU  - Krčum, Dušan
PY  - 2011
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/6163
AB  - Konstrukcija optičkih sistema ima svoju dugu tradiciju, koja je zavisno od izbora nekoherentnog ili koherentnog izvora morala da pretrpi modifikacije u teoretskom i praktičnom smislu. Postoji nekoliko pravaca razvoja optičkih komponenata i sistema, kojima se bavi ovaj rad sa izborom karakterističnih elemenata, analitike, matrične optike (polarizacionih, Müllerovih, Jonesovih i dr. matrica), diferencijalnih jednačina određenog reda, sa specijalnim funkcijama, itd. Teorijska optika ima svoje numeričke prilaze i algoritme. Pored aberacija tipa Seidela i hromatskih, pojavljuju se i aberacije novog tipa vezane za kvantne generatore, pored nelinearnih efekata. U traženju optimalnih alata su odabrani programi Zemax i Matlab i njihovi prilazi komponentama za oblikovanje, transformaciju i propagaciju koherentnog snopa. Među njima su komponente za širenje i razdvajanje snopova (beam expander, splitter). Na ovaj način se mogu analizirati i druge komponente i sistemi uz vrednovanje slučaja sa aberacijama (i bez), promene materijala i odabranih tipova lasera.
AB  - Design of optical systems has a long tradition, which is dependent on the choice of  incoherent  or  coherent  sources;  therefore,  it  had  to  undergo  modifications  in  the  theoretical and practical terms. There are several directions in the development of optical components and systems, which are engaged in this paper with a selection of characteristic features,  analysis,  matrix  optics  (polarization,  Müller,  Jones'  et  al.  matrices),  differential  
equations of a certain order, with special functions, etc. Theoretical optics has a numerical approach  and  algorithms.  In  addition  to  Seidel  and  chromatic  aberrations,  there  are  also  new  types  of  aberrations  associated  with  quantum  generators,  in  addition  to  nonlinear  effects.  In  searching  for  optimal  tools  ZEMAX  and  MATLAB  programs  are  selected  and  their  approaches  to  components  design,  transformation  and  propagation  of  a  coherent  beam.  Among  them  are  the  components  to  expand  and  splitt  (separate)  the  beams  (beam  expander,  splitter).  Based  on  this  approaches,  various  (and  different)  components  and  systems   can   be   analysed   and   evaluated   the   cases   with   aberrations   (and   without),   replacement of material and selected types of lasers.
PB  - Istočno Sarajevo: Elektrotehnički fakultet
C3  - Зборник радова - Међународни научно-стручни симпозијум INFOTEH-JAHORINA 2011.
T1  - Analitički i numerički prilaz optičkim sistemima za koherentno i nekoherentno zračenje
T1  - Analitical and numerical approaches to optical systems for coherent and incoherent radiations
VL  - 10
SP  - 186
EP  - 190
UR  - https://hdl.handle.net/21.15107/rcub_cer_6163
ER  - 

@conference{
author = "Srećković, Milesa and Tomić, Željka and Fidanovski, Zoran and Polić-Radovanović, Suzana R. and Bugarinović, Aleksandar and Marković-Petrović, Jasna and Lukić, Lazar and Krčum, Dušan",
year = "2011",
abstract = "Konstrukcija optičkih sistema ima svoju dugu tradiciju, koja je zavisno od izbora nekoherentnog ili koherentnog izvora morala da pretrpi modifikacije u teoretskom i praktičnom smislu. Postoji nekoliko pravaca razvoja optičkih komponenata i sistema, kojima se bavi ovaj rad sa izborom karakterističnih elemenata, analitike, matrične optike (polarizacionih, Müllerovih, Jonesovih i dr. matrica), diferencijalnih jednačina određenog reda, sa specijalnim funkcijama, itd. Teorijska optika ima svoje numeričke prilaze i algoritme. Pored aberacija tipa Seidela i hromatskih, pojavljuju se i aberacije novog tipa vezane za kvantne generatore, pored nelinearnih efekata. U traženju optimalnih alata su odabrani programi Zemax i Matlab i njihovi prilazi komponentama za oblikovanje, transformaciju i propagaciju koherentnog snopa. Među njima su komponente za širenje i razdvajanje snopova (beam expander, splitter). Na ovaj način se mogu analizirati i druge komponente i sistemi uz vrednovanje slučaja sa aberacijama (i bez), promene materijala i odabranih tipova lasera., Design of optical systems has a long tradition, which is dependent on the choice of  incoherent  or  coherent  sources;  therefore,  it  had  to  undergo  modifications  in  the  theoretical and practical terms. There are several directions in the development of optical components and systems, which are engaged in this paper with a selection of characteristic features,  analysis,  matrix  optics  (polarization,  Müller,  Jones'  et  al.  matrices),  differential  
equations of a certain order, with special functions, etc. Theoretical optics has a numerical approach  and  algorithms.  In  addition  to  Seidel  and  chromatic  aberrations,  there  are  also  new  types  of  aberrations  associated  with  quantum  generators,  in  addition  to  nonlinear  effects.  In  searching  for  optimal  tools  ZEMAX  and  MATLAB  programs  are  selected  and  their  approaches  to  components  design,  transformation  and  propagation  of  a  coherent  beam.  Among  them  are  the  components  to  expand  and  splitt  (separate)  the  beams  (beam  expander,  splitter).  Based  on  this  approaches,  various  (and  different)  components  and  systems   can   be   analysed   and   evaluated   the   cases   with   aberrations   (and   without),   replacement of material and selected types of lasers.",
publisher = "Istočno Sarajevo: Elektrotehnički fakultet",
journal = "Зборник радова - Међународни научно-стручни симпозијум INFOTEH-JAHORINA 2011.",
title = "Analitički i numerički prilaz optičkim sistemima za koherentno i nekoherentno zračenje, Analitical and numerical approaches to optical systems for coherent and incoherent radiations",
volume = "10",
pages = "186-190",
url = "https://hdl.handle.net/21.15107/rcub_cer_6163"
}

Srećković, M., Tomić, Ž., Fidanovski, Z., Polić-Radovanović, S. R., Bugarinović, A., Marković-Petrović, J., Lukić, L.,& Krčum, D.. (2011). Analitički i numerički prilaz optičkim sistemima za koherentno i nekoherentno zračenje. in Зборник радова - Међународни научно-стручни симпозијум INFOTEH-JAHORINA 2011.
Istočno Sarajevo: Elektrotehnički fakultet., 10, 186-190.
https://hdl.handle.net/21.15107/rcub_cer_6163

Srećković M, Tomić Ž, Fidanovski Z, Polić-Radovanović SR, Bugarinović A, Marković-Petrović J, Lukić L, Krčum D. Analitički i numerički prilaz optičkim sistemima za koherentno i nekoherentno zračenje. in Зборник радова - Међународни научно-стручни симпозијум INFOTEH-JAHORINA 2011.. 2011;10:186-190.
https://hdl.handle.net/21.15107/rcub_cer_6163 .

Srećković, Milesa, Tomić, Željka, Fidanovski, Zoran, Polić-Radovanović, Suzana R., Bugarinović, Aleksandar, Marković-Petrović, Jasna, Lukić, Lazar, Krčum, Dušan, "Analitički i numerički prilaz optičkim sistemima za koherentno i nekoherentno zračenje" in Зборник радова - Међународни научно-стручни симпозијум INFOTEH-JAHORINA 2011., 10 (2011):186-190,
https://hdl.handle.net/21.15107/rcub_cer_6163 .

TY  - CONF
AU  - Srećković, Milesa
AU  - Polić-Radovanović, Suzana R.
AU  - Timotijević, Biljana
AU  - Timotijević, Miroslav
AU  - Borna, Nada
AU  - Živković, Monika
AU  - Dukić, Milan
AU  - Bokić, Bojana
PY  - 2010
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/6371
AB  - Uloga lasera u umetnosti i kulturnoj baštini je odavno uključena u mnoge metode dijagnostike, intervencije i zapisa-opisa-beleženja objekata u raznim dimenzijamai oblicima materijala i prostora za zapis. Neophodni prilazi su preko interakcije laserskim snopovima koje ne dovode do ireverzibilnih promena (povreda) sa holografskih (tomografskih) aspekata, ili sa gledišta malih lokalnih povreda, izbacivanja mase, promena boje i sastava, kojima se vrši željena intervencija ili dijagnostikuje željeni parametar. Mnogi od ovih metoda se paralelno mogu koristiti i u medicini. U radu se, pored analize nekoliko savremenih prilaza ovim problematikama i nekoliko eksperimentalnih činjenica dobijenih sa raznih objekata, dotiče i palimpsestna tačka gledišta, kao i dalji razvoj materijala za zapis u sprezi zamene uloge papira složenim strukturama, u vezi sa holografskim zapisima ili ne. Posebni akcenat je dat u vezi sa ultrabrzim optićkim fenomenima, povredama i njihovim praćenjem.
PB  - Zemun: Institute of Physics, University of Belgrade
C3  - Zbornik apstrakata / Konferencija Fotonika 2010 - teorija i eksperimenti u Srbiji, 21.-23. april 2010, Beograd
T1  - Laseri, palimpsest i kulturna baština
SP  - 16
UR  - https://hdl.handle.net/21.15107/rcub_cer_6371
ER  - 

@conference{
author = "Srećković, Milesa and Polić-Radovanović, Suzana R. and Timotijević, Biljana and Timotijević, Miroslav and Borna, Nada and Živković, Monika and Dukić, Milan and Bokić, Bojana",
year = "2010",
abstract = "Uloga lasera u umetnosti i kulturnoj baštini je odavno uključena u mnoge metode dijagnostike, intervencije i zapisa-opisa-beleženja objekata u raznim dimenzijamai oblicima materijala i prostora za zapis. Neophodni prilazi su preko interakcije laserskim snopovima koje ne dovode do ireverzibilnih promena (povreda) sa holografskih (tomografskih) aspekata, ili sa gledišta malih lokalnih povreda, izbacivanja mase, promena boje i sastava, kojima se vrši željena intervencija ili dijagnostikuje željeni parametar. Mnogi od ovih metoda se paralelno mogu koristiti i u medicini. U radu se, pored analize nekoliko savremenih prilaza ovim problematikama i nekoliko eksperimentalnih činjenica dobijenih sa raznih objekata, dotiče i palimpsestna tačka gledišta, kao i dalji razvoj materijala za zapis u sprezi zamene uloge papira složenim strukturama, u vezi sa holografskim zapisima ili ne. Posebni akcenat je dat u vezi sa ultrabrzim optićkim fenomenima, povredama i njihovim praćenjem.",
publisher = "Zemun: Institute of Physics, University of Belgrade",
journal = "Zbornik apstrakata / Konferencija Fotonika 2010 - teorija i eksperimenti u Srbiji, 21.-23. april 2010, Beograd",
title = "Laseri, palimpsest i kulturna baština",
pages = "16",
url = "https://hdl.handle.net/21.15107/rcub_cer_6371"
}

Srećković, M., Polić-Radovanović, S. R., Timotijević, B., Timotijević, M., Borna, N., Živković, M., Dukić, M.,& Bokić, B.. (2010). Laseri, palimpsest i kulturna baština. in Zbornik apstrakata / Konferencija Fotonika 2010 - teorija i eksperimenti u Srbiji, 21.-23. april 2010, Beograd
Zemun: Institute of Physics, University of Belgrade., 16.
https://hdl.handle.net/21.15107/rcub_cer_6371

Srećković M, Polić-Radovanović SR, Timotijević B, Timotijević M, Borna N, Živković M, Dukić M, Bokić B. Laseri, palimpsest i kulturna baština. in Zbornik apstrakata / Konferencija Fotonika 2010 - teorija i eksperimenti u Srbiji, 21.-23. april 2010, Beograd. 2010;:16.
https://hdl.handle.net/21.15107/rcub_cer_6371 .

Srećković, Milesa, Polić-Radovanović, Suzana R., Timotijević, Biljana, Timotijević, Miroslav, Borna, Nada, Živković, Monika, Dukić, Milan, Bokić, Bojana, "Laseri, palimpsest i kulturna baština" in Zbornik apstrakata / Konferencija Fotonika 2010 - teorija i eksperimenti u Srbiji, 21.-23. april 2010, Beograd (2010):16,
https://hdl.handle.net/21.15107/rcub_cer_6371 .

TY  - CONF
AU  - Polić-Radovanović, Suzana R.
AU  - Srećković, Milesa
AU  - Kovačević, Aleksander
AU  - Nikolić, Dragana
AU  - Bojanić, Slobodan
PY  - 2010
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/6372
AB  - Uvođenje 3D laserskog skeniranja u oblast arheologije donelo je promene u brojnim aspektima heritološke paradigme, posebno u domenu dokumentacije. Mogućnost virtuelne spekulativne nadgradljivosti arheoloških lokaliteta, holografskih zapisa stanja artefakata i njihove aktuelizacije u virtuelnim muzejima, predstavljaju novo kontekstualno okruženje u dokumentovanju kulturne baštine. Na liniji metaparadigma-konceptualni modeli, razvoj laserske tehnike utiče na nove odnose na relaciji materijalna-nematerijalna kulturna baština.
Primenom 3D tehnike laserskog skeniranja arheoloških objekata, u percepciju dominantno istorijskog i simboličkog prostora, uvedene su i logički i geometrijski utemeljene strukture. Reč je o kolateralno izvedenom rezultatu, nastalom iz potrebe savršenijeg dokumentovanja arheoloških objekata, koji se ogleda u otvaranju novih pitanja u teoriji, posebno filozofiji prostora. Osnovu za razrešenje ovih problema čine dva fenomena, svetlosni i geometrijski entitet, koji pripadaju različitim totalitetima, fizičkom i apstraktnom, a poseduju oblikovni kvalitet koji prema svojim performansama podjednako deluje i u pitanjima empirijskog dobijanja rezultata i na planu simulacije mernih informacija. Otuda i dualizam entiteta koji se iskazuje u pravcima intepretativnih kretanja: laserska tačka od elektronske ka geometrijskoj manifestaciji, u funkciji označavanja fizičkog, arheološkog objekta, te na drugoj strani geometrijska tačka, od geometrijske ka elektronskoj manifestaciji, kao mogućnost simulacija više hiljada tačaka primenom kombinacije fotogrametrijskog i triangulacijskog merenja sa određenom funkcijom raspodele verovatnoće merne nesigurnosti.
Fizički prostor posmatramo kao subzistentnu stvarnost, u smislu trodimenzionalne ekspanzije u kojoj se nalaze konstituenti realnosti. U razmatranju koegzistencje virtuelnog i fizičkog prostora, polazimo od realnosti arheološkog lokaliteta (predmeta) i realnosti instrumentarijuma koji koristimo da bi transponovali i omogućili virtuelnu i faktografsku nadgradnju. Opservacija fizičkog prostora uvodi nas u tehnološki prostor laserskih, holografskih i elektronskih parametara koji dozvoljavaju tumačenje različitih saodnosnosti. Pokazuje se da upravo potencija virtuelne nadgradljivosti kao postupka koji stvara mogućnost faktografske rekonstrukcije, otvara i prostor za novo čitanje istorije mišljenja o prostoru, koja čini da primenom 3D laserskog skeniranja u oblasti arheologije, nema celovitog, već samo manje ili više celovitog mišljenja, koje je u svom parcijalnom dosegu svakako u mogućnosti da u nekom od brojnih domena opiše prostor.
U skladu sa sopstvenim vremenom, analogno sa Deridinim pojmom differance u teoriji dekonstrukcije, prostor kao termin-sredstvo eksplikacije, poseduje sopstvenu infinitezimalnost koja inicira da se konačnom stvaranju značenja teži ne bi li sam pojam uvek bio sposoban za dopunjavanje. Otuda i nova paradigma i metaparadigma muzeologije, upravo indukovana primenom laserske tehnike, jednako pripadaju virtuelnoj sposobnosti duha i virtuelnoj realizaciji elektronskog medija u kojem opstaju zahvaljujući specifičnom potencijalu memorijskog računarskog prostora.
PB  - Zemun: Institute of Physics, University of Belgrade
C3  - Zbornik apstrakata / Konferencija Fotonika 2010 - teorija i eksperimenti u Srbiji, 21.-23. april 2010, Beograd
T1  - Primena lasera u arheologiji i metaparadigma nove muzeologije
SP  - 15
UR  - https://hdl.handle.net/21.15107/rcub_cer_6372
ER  - 

@conference{
author = "Polić-Radovanović, Suzana R. and Srećković, Milesa and Kovačević, Aleksander and Nikolić, Dragana and Bojanić, Slobodan",
year = "2010",
abstract = "Uvođenje 3D laserskog skeniranja u oblast arheologije donelo je promene u brojnim aspektima heritološke paradigme, posebno u domenu dokumentacije. Mogućnost virtuelne spekulativne nadgradljivosti arheoloških lokaliteta, holografskih zapisa stanja artefakata i njihove aktuelizacije u virtuelnim muzejima, predstavljaju novo kontekstualno okruženje u dokumentovanju kulturne baštine. Na liniji metaparadigma-konceptualni modeli, razvoj laserske tehnike utiče na nove odnose na relaciji materijalna-nematerijalna kulturna baština.
Primenom 3D tehnike laserskog skeniranja arheoloških objekata, u percepciju dominantno istorijskog i simboličkog prostora, uvedene su i logički i geometrijski utemeljene strukture. Reč je o kolateralno izvedenom rezultatu, nastalom iz potrebe savršenijeg dokumentovanja arheoloških objekata, koji se ogleda u otvaranju novih pitanja u teoriji, posebno filozofiji prostora. Osnovu za razrešenje ovih problema čine dva fenomena, svetlosni i geometrijski entitet, koji pripadaju različitim totalitetima, fizičkom i apstraktnom, a poseduju oblikovni kvalitet koji prema svojim performansama podjednako deluje i u pitanjima empirijskog dobijanja rezultata i na planu simulacije mernih informacija. Otuda i dualizam entiteta koji se iskazuje u pravcima intepretativnih kretanja: laserska tačka od elektronske ka geometrijskoj manifestaciji, u funkciji označavanja fizičkog, arheološkog objekta, te na drugoj strani geometrijska tačka, od geometrijske ka elektronskoj manifestaciji, kao mogućnost simulacija više hiljada tačaka primenom kombinacije fotogrametrijskog i triangulacijskog merenja sa određenom funkcijom raspodele verovatnoće merne nesigurnosti.
Fizički prostor posmatramo kao subzistentnu stvarnost, u smislu trodimenzionalne ekspanzije u kojoj se nalaze konstituenti realnosti. U razmatranju koegzistencje virtuelnog i fizičkog prostora, polazimo od realnosti arheološkog lokaliteta (predmeta) i realnosti instrumentarijuma koji koristimo da bi transponovali i omogućili virtuelnu i faktografsku nadgradnju. Opservacija fizičkog prostora uvodi nas u tehnološki prostor laserskih, holografskih i elektronskih parametara koji dozvoljavaju tumačenje različitih saodnosnosti. Pokazuje se da upravo potencija virtuelne nadgradljivosti kao postupka koji stvara mogućnost faktografske rekonstrukcije, otvara i prostor za novo čitanje istorije mišljenja o prostoru, koja čini da primenom 3D laserskog skeniranja u oblasti arheologije, nema celovitog, već samo manje ili više celovitog mišljenja, koje je u svom parcijalnom dosegu svakako u mogućnosti da u nekom od brojnih domena opiše prostor.
U skladu sa sopstvenim vremenom, analogno sa Deridinim pojmom differance u teoriji dekonstrukcije, prostor kao termin-sredstvo eksplikacije, poseduje sopstvenu infinitezimalnost koja inicira da se konačnom stvaranju značenja teži ne bi li sam pojam uvek bio sposoban za dopunjavanje. Otuda i nova paradigma i metaparadigma muzeologije, upravo indukovana primenom laserske tehnike, jednako pripadaju virtuelnoj sposobnosti duha i virtuelnoj realizaciji elektronskog medija u kojem opstaju zahvaljujući specifičnom potencijalu memorijskog računarskog prostora.",
publisher = "Zemun: Institute of Physics, University of Belgrade",
journal = "Zbornik apstrakata / Konferencija Fotonika 2010 - teorija i eksperimenti u Srbiji, 21.-23. april 2010, Beograd",
title = "Primena lasera u arheologiji i metaparadigma nove muzeologije",
pages = "15",
url = "https://hdl.handle.net/21.15107/rcub_cer_6372"
}

Polić-Radovanović, S. R., Srećković, M., Kovačević, A., Nikolić, D.,& Bojanić, S.. (2010). Primena lasera u arheologiji i metaparadigma nove muzeologije. in Zbornik apstrakata / Konferencija Fotonika 2010 - teorija i eksperimenti u Srbiji, 21.-23. april 2010, Beograd
Zemun: Institute of Physics, University of Belgrade., 15.
https://hdl.handle.net/21.15107/rcub_cer_6372

Polić-Radovanović SR, Srećković M, Kovačević A, Nikolić D, Bojanić S. Primena lasera u arheologiji i metaparadigma nove muzeologije. in Zbornik apstrakata / Konferencija Fotonika 2010 - teorija i eksperimenti u Srbiji, 21.-23. april 2010, Beograd. 2010;:15.
https://hdl.handle.net/21.15107/rcub_cer_6372 .

Polić-Radovanović, Suzana R., Srećković, Milesa, Kovačević, Aleksander, Nikolić, Dragana, Bojanić, Slobodan, "Primena lasera u arheologiji i metaparadigma nove muzeologije" in Zbornik apstrakata / Konferencija Fotonika 2010 - teorija i eksperimenti u Srbiji, 21.-23. april 2010, Beograd (2010):15,
https://hdl.handle.net/21.15107/rcub_cer_6372 .