Pantović, Radoje V.

Link to this page

Authority KeyName Variants
bbd25f90-f867-49ce-a913-2ce577aac0b3
  • Pantović, Radoje V. (3)
Projects

Author's Bibliography

Electric Properties of Biodegradable Copper Filled Poly(Lactide-co-Glycolide) Composites

Pavlović, Miroslav; Pantović, Radoje V.; Pantović Pavlović, Marijana; Stevanović, Maja; Nikolić, Nebojša D.; Stevanović, Jasmina; Panić, Vladimir

(Zvornik, Republic of Srpska, B&H : Faculty of Technology, 2019)

TY  - CONF
AU  - Pavlović, Miroslav
AU  - Pantović, Radoje V.
AU  - Pantović Pavlović, Marijana
AU  - Stevanović, Maja
AU  - Nikolić, Nebojša D.
AU  - Stevanović, Jasmina
AU  - Panić, Vladimir
PY  - 2019
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/6625
AB  - The results of experimental studies of the properties of composite materials based on Poly(lactide-co-glycolide) (PLGA) matrix filled with electrolytic copper powder, having very high dendritic structure, are presented in this manuscript. Copper powder volume fractions used as filler in all prepared composites were varied in the range of 0.4-7.2 vol. %. The samples were prepared by hot moulding injection at 140°C. Influence of morphology on the conductivity and percolation threshold of the composites was examined and characterization included: Electrical conductivity measurements using Impedance Spectroscopy (IS), Scanning Electron Microscopy (SEM), Energy-dispersive X-ray spectroscopy (EDS) and Fourier-transform Infrared Spectroscopy (FTIR). Presence of three dimensional conductive pathways was confirmed. The obtained percolation threshold was 2.72 vol.%, which is about three times lower than the one stated in the literature for similar composites. This property is ascribed to different morphology of filler used in investigation.
PB  - Zvornik, Republic of Srpska, B&H : Faculty of Technology
C3  - Book of Abstracts - VI International Congress "Engineering, Environment and Materials in Process Industry", March 11-13, Jahorina, Republic of Srpska, Bosnia and Herzegovina
T1  - Electric Properties of Biodegradable Copper Filled Poly(Lactide-co-Glycolide) Composites
SP  - 636
EP  - 645
UR  - https://hdl.handle.net/21.15107/rcub_cer_6625
ER  - 
@conference{
author = "Pavlović, Miroslav and Pantović, Radoje V. and Pantović Pavlović, Marijana and Stevanović, Maja and Nikolić, Nebojša D. and Stevanović, Jasmina and Panić, Vladimir",
year = "2019",
abstract = "The results of experimental studies of the properties of composite materials based on Poly(lactide-co-glycolide) (PLGA) matrix filled with electrolytic copper powder, having very high dendritic structure, are presented in this manuscript. Copper powder volume fractions used as filler in all prepared composites were varied in the range of 0.4-7.2 vol. %. The samples were prepared by hot moulding injection at 140°C. Influence of morphology on the conductivity and percolation threshold of the composites was examined and characterization included: Electrical conductivity measurements using Impedance Spectroscopy (IS), Scanning Electron Microscopy (SEM), Energy-dispersive X-ray spectroscopy (EDS) and Fourier-transform Infrared Spectroscopy (FTIR). Presence of three dimensional conductive pathways was confirmed. The obtained percolation threshold was 2.72 vol.%, which is about three times lower than the one stated in the literature for similar composites. This property is ascribed to different morphology of filler used in investigation.",
publisher = "Zvornik, Republic of Srpska, B&H : Faculty of Technology",
journal = "Book of Abstracts - VI International Congress "Engineering, Environment and Materials in Process Industry", March 11-13, Jahorina, Republic of Srpska, Bosnia and Herzegovina",
title = "Electric Properties of Biodegradable Copper Filled Poly(Lactide-co-Glycolide) Composites",
pages = "636-645",
url = "https://hdl.handle.net/21.15107/rcub_cer_6625"
}
Pavlović, M., Pantović, R. V., Pantović Pavlović, M., Stevanović, M., Nikolić, N. D., Stevanović, J.,& Panić, V.. (2019). Electric Properties of Biodegradable Copper Filled Poly(Lactide-co-Glycolide) Composites. in Book of Abstracts - VI International Congress "Engineering, Environment and Materials in Process Industry", March 11-13, Jahorina, Republic of Srpska, Bosnia and Herzegovina
Zvornik, Republic of Srpska, B&H : Faculty of Technology., 636-645.
https://hdl.handle.net/21.15107/rcub_cer_6625
Pavlović M, Pantović RV, Pantović Pavlović M, Stevanović M, Nikolić ND, Stevanović J, Panić V. Electric Properties of Biodegradable Copper Filled Poly(Lactide-co-Glycolide) Composites. in Book of Abstracts - VI International Congress "Engineering, Environment and Materials in Process Industry", March 11-13, Jahorina, Republic of Srpska, Bosnia and Herzegovina. 2019;:636-645.
https://hdl.handle.net/21.15107/rcub_cer_6625 .
Pavlović, Miroslav, Pantović, Radoje V., Pantović Pavlović, Marijana, Stevanović, Maja, Nikolić, Nebojša D., Stevanović, Jasmina, Panić, Vladimir, "Electric Properties of Biodegradable Copper Filled Poly(Lactide-co-Glycolide) Composites" in Book of Abstracts - VI International Congress "Engineering, Environment and Materials in Process Industry", March 11-13, Jahorina, Republic of Srpska, Bosnia and Herzegovina (2019):636-645,
https://hdl.handle.net/21.15107/rcub_cer_6625 .

Electric Conductivity of Electrolytic Copper Powder Filled Poly(Lactide-co-Glycolide) Composites

Pavlović, Miroslav M.; Pantović, Radoje V.; Janković, Zoran; Nedeljković, Dragan; Nikolić, Nebojša D.; Pavlović, Miomir; Stevanović, Jasmina

(ESG, 2019)

TY  - JOUR
AU  - Pavlović, Miroslav M.
AU  - Pantović, Radoje V.
AU  - Janković, Zoran
AU  - Nedeljković, Dragan
AU  - Nikolić, Nebojša D.
AU  - Pavlović, Miomir
AU  - Stevanović, Jasmina
PY  - 2019
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/4018
AB  - This manuscript presents the results of investigating the properties of composite materials having poly(lactide-co-glycolide) (PLGA) matrix filled with electrolytically produced copper powder whose particles have a highly developed branched structure. The volume fraction of the copper powder used as a filler for the preparation of the composite was varied from 0.4 to 7.2 vol. %. The samples were prepared at 140 °C by hot molding injection. The effect of the morphology of electrolytically obtained copper powder on the appearance of the percolation threshold and on the conductivity of the composites was studied. Characterization included impedance spectroscopy (IS) measurement of electric conductivity and scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDS), and Fourier-transform Infrared Spectroscopy (FTIR) morphological analysis. Electric conductive pathways were formed throughout the entire volume of the composites, where their formation was purely stochastic in all the dimensions. The percolation threshold was 2.72 vol.%, which is significantly lower than the one stated in the literature for similar composites, since these kind of composites are investigated for the first time. This property can be attributed to the use of a filler of different, diverse morphologies.
PB  - ESG
T2  - International Journal of Electrochemical Science
T1  - Electric Conductivity of Electrolytic Copper Powder Filled Poly(Lactide-co-Glycolide) Composites
SP  - 9825
EP  - 9837
DO  - 10.20964/2019.10.02
ER  - 
@article{
author = "Pavlović, Miroslav M. and Pantović, Radoje V. and Janković, Zoran and Nedeljković, Dragan and Nikolić, Nebojša D. and Pavlović, Miomir and Stevanović, Jasmina",
year = "2019",
abstract = "This manuscript presents the results of investigating the properties of composite materials having poly(lactide-co-glycolide) (PLGA) matrix filled with electrolytically produced copper powder whose particles have a highly developed branched structure. The volume fraction of the copper powder used as a filler for the preparation of the composite was varied from 0.4 to 7.2 vol. %. The samples were prepared at 140 °C by hot molding injection. The effect of the morphology of electrolytically obtained copper powder on the appearance of the percolation threshold and on the conductivity of the composites was studied. Characterization included impedance spectroscopy (IS) measurement of electric conductivity and scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDS), and Fourier-transform Infrared Spectroscopy (FTIR) morphological analysis. Electric conductive pathways were formed throughout the entire volume of the composites, where their formation was purely stochastic in all the dimensions. The percolation threshold was 2.72 vol.%, which is significantly lower than the one stated in the literature for similar composites, since these kind of composites are investigated for the first time. This property can be attributed to the use of a filler of different, diverse morphologies.",
publisher = "ESG",
journal = "International Journal of Electrochemical Science",
title = "Electric Conductivity of Electrolytic Copper Powder Filled Poly(Lactide-co-Glycolide) Composites",
pages = "9825-9837",
doi = "10.20964/2019.10.02"
}
Pavlović, M. M., Pantović, R. V., Janković, Z., Nedeljković, D., Nikolić, N. D., Pavlović, M.,& Stevanović, J.. (2019). Electric Conductivity of Electrolytic Copper Powder Filled Poly(Lactide-co-Glycolide) Composites. in International Journal of Electrochemical Science
ESG., 9825-9837.
https://doi.org/10.20964/2019.10.02
Pavlović MM, Pantović RV, Janković Z, Nedeljković D, Nikolić ND, Pavlović M, Stevanović J. Electric Conductivity of Electrolytic Copper Powder Filled Poly(Lactide-co-Glycolide) Composites. in International Journal of Electrochemical Science. 2019;:9825-9837.
doi:10.20964/2019.10.02 .
Pavlović, Miroslav M., Pantović, Radoje V., Janković, Zoran, Nedeljković, Dragan, Nikolić, Nebojša D., Pavlović, Miomir, Stevanović, Jasmina, "Electric Conductivity of Electrolytic Copper Powder Filled Poly(Lactide-co-Glycolide) Composites" in International Journal of Electrochemical Science (2019):9825-9837,
https://doi.org/10.20964/2019.10.02 . .
3
1
3

Monitoring of Krivelj river collector deformation

Pantović, Radoje V.; Pantović Pavlović, Marijana; Pantović Spajić, Katarina; Pavlović, Miroslav

(Skopje : Society of chemists and technologists of Macedonia, 2016)

TY  - CONF
AU  - Pantović, Radoje V.
AU  - Pantović Pavlović, Marijana
AU  - Pantović Spajić, Katarina
AU  - Pavlović, Miroslav
PY  - 2016
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/6632
AB  - Study of monitoring and analyzing the deformation of the collector Krivelj River has been developed. In the period May-July 2009, the recording of the measurements and the state of the crack deformation in reinforced concrete collectors lining was performed.
Based on analysis of the recording, four characteristic lining deformation of the shape in vulnerable parts of the collector were identified: in calotte, on the sides of calotte, sides themselves, and sides of ducts.
Deformations in calotte zone were in form of tension cracks, reinforcement tears and separation of concrete from the reinforcement created due to high tensile stresses in the inner part of the reinforced concrete lining. The worst damage was observed due to shear stresses in the lateral parts of the calotte, while the cracks in some parts exceeded 10 cm. These are very large and dangerous damages to the collector. Given that there was a fracture of concrete, loads in those areas was taken over by the armature, which was affected by severe corrosion. Due to the large vertical pressures and the tendency for flattening of the collector in internal lateral parts of support, there was erosion of concrete in the form of plates. Small cracks appeared in the side parts of the collector ducts, too.
For collector cross sections recording, in addition to the geodetic procedure, rotating laser beam procedure was applied. Based on these recordings it can be concluded that the profile of the collector, on his damaged sections, is "flattened". The laser process enables easier, faster and more credible measurements of the size and shape of the profile, which may be of particular importance when installing frameworks for future temporary and permanent rehabilitation of vulnerable sections of the collector.
Changes in the deformation of the ten selected places in collectors were observed using embedded devices for measuring deformation cracks in collector reinforced concrete support. Final results of monitoring changes in absolute and relative deformation of reinforced concrete collector of over time show that established shifts are part of the process of reinforced concrete roof supports deformation, which is directed towards the fracture and support breaking.
PB  - Skopje : Society of chemists and technologists of Macedonia
C3  - Book of abstracts - 24th Congress of Chemists and Technologists of Macedonia, September 11-14, Ohrid, Republic of Macedonia
T1  - Monitoring of Krivelj river collector deformation
SP  - 161
EP  - 161
UR  - https://hdl.handle.net/21.15107/rcub_cer_6632
ER  - 
@conference{
author = "Pantović, Radoje V. and Pantović Pavlović, Marijana and Pantović Spajić, Katarina and Pavlović, Miroslav",
year = "2016",
abstract = "Study of monitoring and analyzing the deformation of the collector Krivelj River has been developed. In the period May-July 2009, the recording of the measurements and the state of the crack deformation in reinforced concrete collectors lining was performed.
Based on analysis of the recording, four characteristic lining deformation of the shape in vulnerable parts of the collector were identified: in calotte, on the sides of calotte, sides themselves, and sides of ducts.
Deformations in calotte zone were in form of tension cracks, reinforcement tears and separation of concrete from the reinforcement created due to high tensile stresses in the inner part of the reinforced concrete lining. The worst damage was observed due to shear stresses in the lateral parts of the calotte, while the cracks in some parts exceeded 10 cm. These are very large and dangerous damages to the collector. Given that there was a fracture of concrete, loads in those areas was taken over by the armature, which was affected by severe corrosion. Due to the large vertical pressures and the tendency for flattening of the collector in internal lateral parts of support, there was erosion of concrete in the form of plates. Small cracks appeared in the side parts of the collector ducts, too.
For collector cross sections recording, in addition to the geodetic procedure, rotating laser beam procedure was applied. Based on these recordings it can be concluded that the profile of the collector, on his damaged sections, is "flattened". The laser process enables easier, faster and more credible measurements of the size and shape of the profile, which may be of particular importance when installing frameworks for future temporary and permanent rehabilitation of vulnerable sections of the collector.
Changes in the deformation of the ten selected places in collectors were observed using embedded devices for measuring deformation cracks in collector reinforced concrete support. Final results of monitoring changes in absolute and relative deformation of reinforced concrete collector of over time show that established shifts are part of the process of reinforced concrete roof supports deformation, which is directed towards the fracture and support breaking.",
publisher = "Skopje : Society of chemists and technologists of Macedonia",
journal = "Book of abstracts - 24th Congress of Chemists and Technologists of Macedonia, September 11-14, Ohrid, Republic of Macedonia",
title = "Monitoring of Krivelj river collector deformation",
pages = "161-161",
url = "https://hdl.handle.net/21.15107/rcub_cer_6632"
}
Pantović, R. V., Pantović Pavlović, M., Pantović Spajić, K.,& Pavlović, M.. (2016). Monitoring of Krivelj river collector deformation. in Book of abstracts - 24th Congress of Chemists and Technologists of Macedonia, September 11-14, Ohrid, Republic of Macedonia
Skopje : Society of chemists and technologists of Macedonia., 161-161.
https://hdl.handle.net/21.15107/rcub_cer_6632
Pantović RV, Pantović Pavlović M, Pantović Spajić K, Pavlović M. Monitoring of Krivelj river collector deformation. in Book of abstracts - 24th Congress of Chemists and Technologists of Macedonia, September 11-14, Ohrid, Republic of Macedonia. 2016;:161-161.
https://hdl.handle.net/21.15107/rcub_cer_6632 .
Pantović, Radoje V., Pantović Pavlović, Marijana, Pantović Spajić, Katarina, Pavlović, Miroslav, "Monitoring of Krivelj river collector deformation" in Book of abstracts - 24th Congress of Chemists and Technologists of Macedonia, September 11-14, Ohrid, Republic of Macedonia (2016):161-161,
https://hdl.handle.net/21.15107/rcub_cer_6632 .