TY  - JOUR
AU  - Jakšić, Zoran
AU  - Pantelic, Dejan
AU  - Sarajlić, Milija
AU  - Savic-Sevic, Svetlana
AU  - Matovic, Jovan
AU  - Jelenkovic, Branislav
AU  - Vasiljević-Radović, Dana
AU  - Curcic, Srecko
AU  - Vuković, Slobodan M.
AU  - Pavlović, Vladimir B.
AU  - Buha, Jelena
AU  - Lackovic, Vesna
AU  - Labudovic-Borovic, Milica
AU  - Curcic, Bozidar
PY  - 2013
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/1216
AB  - In this paper we propose a possible use of butterfly scales as templates for ordered 2D or 3D nanophotonic materials, with complexity not easily reproducible by conventional micro/nanofabrication methods. Functionalization through laminar nanocompositing is utilized to impart novel properties to the biological scaffold. An extremely wide variability of butterfly scale forms, shapes, sizes and fine structures is observed in nature, many of them already possessing peculiar optical properties. Their nanophotonic functionalization ensures a large choice of forms and functions, including enhanced light localization, light and plasmon waveguiding and general metamaterial behavior, to mention a few. We show that one is able to achieve a combination of plasmonics and bionics, resulting in functionalities seldom if ever met in nature. As an illustration we have analyzed the photonic properties of the nanostructured scales on the wings of Purple Emperor butterflies Apatura ilia, Apatura iris and Sasakia charonda. Their intricate nanometer-sized structures produce remarkable ultraviolet-blue iridescence, spectrally and directionally narrow. We present our analysis of their plasmonic/nanophotonic functionalization including preliminary calculations and initial experimental results. As a simple example, we used radiofrequent sputtering to produce nanoaperture-based plasmonic structures at a fraction of the cost and necessary engineering efforts compared to the conventional top-down methods. We conclude that the described pathway to biomimetic plasmonics offers potentials for significant expansion of the nanophotonic and nanoplasmonic material toolbox.
PB  - Elsevier
T2  - Optical Materials
T1  - Butterfly scales as bionic templates for complex ordered nanophotonic materials: A pathway to biomimetic plasmonics
VL  - 35
IS  - 10
SP  - 1869
EP  - 1875
DO  - 10.1016/j.optmat.2013.04.004
ER  - 

@article{
author = "Jakšić, Zoran and Pantelic, Dejan and Sarajlić, Milija and Savic-Sevic, Svetlana and Matovic, Jovan and Jelenkovic, Branislav and Vasiljević-Radović, Dana and Curcic, Srecko and Vuković, Slobodan M. and Pavlović, Vladimir B. and Buha, Jelena and Lackovic, Vesna and Labudovic-Borovic, Milica and Curcic, Bozidar",
year = "2013",
abstract = "In this paper we propose a possible use of butterfly scales as templates for ordered 2D or 3D nanophotonic materials, with complexity not easily reproducible by conventional micro/nanofabrication methods. Functionalization through laminar nanocompositing is utilized to impart novel properties to the biological scaffold. An extremely wide variability of butterfly scale forms, shapes, sizes and fine structures is observed in nature, many of them already possessing peculiar optical properties. Their nanophotonic functionalization ensures a large choice of forms and functions, including enhanced light localization, light and plasmon waveguiding and general metamaterial behavior, to mention a few. We show that one is able to achieve a combination of plasmonics and bionics, resulting in functionalities seldom if ever met in nature. As an illustration we have analyzed the photonic properties of the nanostructured scales on the wings of Purple Emperor butterflies Apatura ilia, Apatura iris and Sasakia charonda. Their intricate nanometer-sized structures produce remarkable ultraviolet-blue iridescence, spectrally and directionally narrow. We present our analysis of their plasmonic/nanophotonic functionalization including preliminary calculations and initial experimental results. As a simple example, we used radiofrequent sputtering to produce nanoaperture-based plasmonic structures at a fraction of the cost and necessary engineering efforts compared to the conventional top-down methods. We conclude that the described pathway to biomimetic plasmonics offers potentials for significant expansion of the nanophotonic and nanoplasmonic material toolbox.",
publisher = "Elsevier",
journal = "Optical Materials",
title = "Butterfly scales as bionic templates for complex ordered nanophotonic materials: A pathway to biomimetic plasmonics",
volume = "35",
number = "10",
pages = "1869-1875",
doi = "10.1016/j.optmat.2013.04.004"
}

Jakšić, Z., Pantelic, D., Sarajlić, M., Savic-Sevic, S., Matovic, J., Jelenkovic, B., Vasiljević-Radović, D., Curcic, S., Vuković, S. M., Pavlović, V. B., Buha, J., Lackovic, V., Labudovic-Borovic, M.,& Curcic, B.. (2013). Butterfly scales as bionic templates for complex ordered nanophotonic materials: A pathway to biomimetic plasmonics. in Optical Materials
Elsevier., 35(10), 1869-1875.
https://doi.org/10.1016/j.optmat.2013.04.004

Jakšić Z, Pantelic D, Sarajlić M, Savic-Sevic S, Matovic J, Jelenkovic B, Vasiljević-Radović D, Curcic S, Vuković SM, Pavlović VB, Buha J, Lackovic V, Labudovic-Borovic M, Curcic B. Butterfly scales as bionic templates for complex ordered nanophotonic materials: A pathway to biomimetic plasmonics. in Optical Materials. 2013;35(10):1869-1875.
doi:10.1016/j.optmat.2013.04.004 .

Jakšić, Zoran, Pantelic, Dejan, Sarajlić, Milija, Savic-Sevic, Svetlana, Matovic, Jovan, Jelenkovic, Branislav, Vasiljević-Radović, Dana, Curcic, Srecko, Vuković, Slobodan M., Pavlović, Vladimir B., Buha, Jelena, Lackovic, Vesna, Labudovic-Borovic, Milica, Curcic, Bozidar, "Butterfly scales as bionic templates for complex ordered nanophotonic materials: A pathway to biomimetic plasmonics" in Optical Materials, 35, no. 10 (2013):1869-1875,
https://doi.org/10.1016/j.optmat.2013.04.004 . .

TY  - CONF
AU  - Jakšić, Zoran
AU  - Radovanović, Filip
AU  - Nastasović, Aleksandra
AU  - Matovic, Jovan
PY  - 2013
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/1243
AB  - We considered the possibility to fabricate multifunctional nanocomposite membranes as a platform for plasmonic metamaterials, simultaneously incorporating pores, built-in functional groups and active nanoparticles. To this purpose we combined lamination and inclusion of nanofillers into the membrane host. For the basic material we chose macroporous crosslinked copolymers based on glycidyl methacrylate (GMA). The epoxy group present in GMA molecule is readily transformed into various functional groups that further serve as affinity enhancers, ensuring the usability of the membranes as pre-concentrators of selected agents in plasmonic sensors. To form GMA-based membranes we used a recently proposed method combining the traditional immersion precipitation with photopolymerization and crosslinking of functional monomers. Further functionalization is obtained by in-situ formation of noble metal nanoparticles directly within the GMA host. In this way membranes with simultaneous plasmonic, adsorbent and catalytic functionality are obtained. We considered the use of the our structures for plasmonic chemical sensors where separator, pre-concentrator and binding agent are integrated with the plasmonic crystal, as well as for plasmonic enhancement of photocatalytic reactions in microreactors. Our approach gives a highly tailorable element compatible with microelectromechanical systems (MEMS) technologies and readily transferable across platforms.
C3  - Progress in Electromagnetics Research Symposium
T1  - Multifunctionalized Self-supported (Nano) Membranes as Integrated Platform for Plasmonic Metamaterials
SP  - 1016
EP  - 1020
UR  - https://hdl.handle.net/21.15107/rcub_dais_783
ER  - 

@conference{
author = "Jakšić, Zoran and Radovanović, Filip and Nastasović, Aleksandra and Matovic, Jovan",
year = "2013",
abstract = "We considered the possibility to fabricate multifunctional nanocomposite membranes as a platform for plasmonic metamaterials, simultaneously incorporating pores, built-in functional groups and active nanoparticles. To this purpose we combined lamination and inclusion of nanofillers into the membrane host. For the basic material we chose macroporous crosslinked copolymers based on glycidyl methacrylate (GMA). The epoxy group present in GMA molecule is readily transformed into various functional groups that further serve as affinity enhancers, ensuring the usability of the membranes as pre-concentrators of selected agents in plasmonic sensors. To form GMA-based membranes we used a recently proposed method combining the traditional immersion precipitation with photopolymerization and crosslinking of functional monomers. Further functionalization is obtained by in-situ formation of noble metal nanoparticles directly within the GMA host. In this way membranes with simultaneous plasmonic, adsorbent and catalytic functionality are obtained. We considered the use of the our structures for plasmonic chemical sensors where separator, pre-concentrator and binding agent are integrated with the plasmonic crystal, as well as for plasmonic enhancement of photocatalytic reactions in microreactors. Our approach gives a highly tailorable element compatible with microelectromechanical systems (MEMS) technologies and readily transferable across platforms.",
journal = "Progress in Electromagnetics Research Symposium",
title = "Multifunctionalized Self-supported (Nano) Membranes as Integrated Platform for Plasmonic Metamaterials",
pages = "1016-1020",
url = "https://hdl.handle.net/21.15107/rcub_dais_783"
}

Jakšić, Z., Radovanović, F., Nastasović, A.,& Matovic, J.. (2013). Multifunctionalized Self-supported (Nano) Membranes as Integrated Platform for Plasmonic Metamaterials. in Progress in Electromagnetics Research Symposium, 1016-1020.
https://hdl.handle.net/21.15107/rcub_dais_783

Jakšić Z, Radovanović F, Nastasović A, Matovic J. Multifunctionalized Self-supported (Nano) Membranes as Integrated Platform for Plasmonic Metamaterials. in Progress in Electromagnetics Research Symposium. 2013;:1016-1020.
https://hdl.handle.net/21.15107/rcub_dais_783 .

Jakšić, Zoran, Radovanović, Filip, Nastasović, Aleksandra, Matovic, Jovan, "Multifunctionalized Self-supported (Nano) Membranes as Integrated Platform for Plasmonic Metamaterials" in Progress in Electromagnetics Research Symposium (2013):1016-1020,
https://hdl.handle.net/21.15107/rcub_dais_783 .

TY  - JOUR
AU  - Jakšić, Zoran
AU  - Vuković, Slobodan M.
AU  - Matovic, Jovan
AU  - Tanasković, Dragan
PY  - 2011
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/831
AB  - In this paper we review some metasurfaces with negative values of effective refractive index, as scaffolds for a new generation of surface plasmon polariton-based biological or chemical sensors. The electromagnetic properties of a metasurface may be tuned by its full immersion into analyte, or by the adsorption of a thin layer on it, both of which change its properties as a plasmonic guide. We consider various simple forms of plasmonic crystals suitable for this purpose. We start with the basic case of a freestanding, electromagnetically symmetrical plasmonic slab and analyze different ultrathin, multilayer structures, to finally consider some two-dimensional "wallpaper" geometries like split ring resonator arrays and fishnet structures. A part of the text is dedicated to the possibility of multifunctionalization where a metasurface structure is simultaneously utilized both for sensing and for selectivity enhancement. Finally we give an overview of surface-bound intrinsic electromagnetic noise phenomena that limits the ultimate performance of a metasurfaces sensor.
PB  - MDPI
T2  - Materials
T1  - Negative Refractive Index Metasurfaces for Enhanced Biosensing
VL  - 4
IS  - 1
SP  - 1
EP  - 36
DO  - 10.3390/ma4010001
ER  - 

@article{
author = "Jakšić, Zoran and Vuković, Slobodan M. and Matovic, Jovan and Tanasković, Dragan",
year = "2011",
abstract = "In this paper we review some metasurfaces with negative values of effective refractive index, as scaffolds for a new generation of surface plasmon polariton-based biological or chemical sensors. The electromagnetic properties of a metasurface may be tuned by its full immersion into analyte, or by the adsorption of a thin layer on it, both of which change its properties as a plasmonic guide. We consider various simple forms of plasmonic crystals suitable for this purpose. We start with the basic case of a freestanding, electromagnetically symmetrical plasmonic slab and analyze different ultrathin, multilayer structures, to finally consider some two-dimensional "wallpaper" geometries like split ring resonator arrays and fishnet structures. A part of the text is dedicated to the possibility of multifunctionalization where a metasurface structure is simultaneously utilized both for sensing and for selectivity enhancement. Finally we give an overview of surface-bound intrinsic electromagnetic noise phenomena that limits the ultimate performance of a metasurfaces sensor.",
publisher = "MDPI",
journal = "Materials",
title = "Negative Refractive Index Metasurfaces for Enhanced Biosensing",
volume = "4",
number = "1",
pages = "1-36",
doi = "10.3390/ma4010001"
}

Jakšić, Z., Vuković, S. M., Matovic, J.,& Tanasković, D.. (2011). Negative Refractive Index Metasurfaces for Enhanced Biosensing. in Materials
MDPI., 4(1), 1-36.
https://doi.org/10.3390/ma4010001

Jakšić Z, Vuković SM, Matovic J, Tanasković D. Negative Refractive Index Metasurfaces for Enhanced Biosensing. in Materials. 2011;4(1):1-36.
doi:10.3390/ma4010001 .

Jakšić, Zoran, Vuković, Slobodan M., Matovic, Jovan, Tanasković, Dragan, "Negative Refractive Index Metasurfaces for Enhanced Biosensing" in Materials, 4, no. 1 (2011):1-36,
https://doi.org/10.3390/ma4010001 . .

TY  - JOUR
AU  - Jakšić, Olga
AU  - Jakšić, Zoran
AU  - Matovic, Jovan
PY  - 2010
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/649
AB  - We investigated intrinsic noise in plasmonic sensors caused by adsorption and desorption of gaseous analytes on the sensor surface. We analyzed a general situation when there is a larger number of different analyte species. We applied our model to calculate various analyte mixtures, including some environmental pollutants, toxic and dangerous substances. The spectral density of mean square refractive index fluctuations follows a dependence similar to that of generation-recombination noise in photodetectors, flat at lower frequencies and sharply decreasing at higher. Some of the calculated noise levels are well within the detection range of conventional surface plasmon resonance sensors. An AD noise peak is observed in temperature dependence of mean square refractive index fluctuations, thus sensor operating temperature may be optimized to obtain larger signal to noise ratio. A significant property of AD noise is its rise with the decreasing plasmon sensor area, which means that it will be even more pronounced in modern nanoplasmonic devices. Our consideration is valid both for conventional surface plasmon resonance devices and for general nanoplasmonic devices.
PB  - Springer Heidelberg, Heidelberg
T2  - Microsystem Technologies-Micro-And Nanosystems-Information Storage and Processing Systems
T1  - Adsorption-desorption noise in plasmonic chemical/biological sensors for multiple analyte environment
VL  - 16
IS  - 5
SP  - 735
EP  - 743
DO  - 10.1007/s00542-010-1043-7
ER  - 

@article{
author = "Jakšić, Olga and Jakšić, Zoran and Matovic, Jovan",
year = "2010",
abstract = "We investigated intrinsic noise in plasmonic sensors caused by adsorption and desorption of gaseous analytes on the sensor surface. We analyzed a general situation when there is a larger number of different analyte species. We applied our model to calculate various analyte mixtures, including some environmental pollutants, toxic and dangerous substances. The spectral density of mean square refractive index fluctuations follows a dependence similar to that of generation-recombination noise in photodetectors, flat at lower frequencies and sharply decreasing at higher. Some of the calculated noise levels are well within the detection range of conventional surface plasmon resonance sensors. An AD noise peak is observed in temperature dependence of mean square refractive index fluctuations, thus sensor operating temperature may be optimized to obtain larger signal to noise ratio. A significant property of AD noise is its rise with the decreasing plasmon sensor area, which means that it will be even more pronounced in modern nanoplasmonic devices. Our consideration is valid both for conventional surface plasmon resonance devices and for general nanoplasmonic devices.",
publisher = "Springer Heidelberg, Heidelberg",
journal = "Microsystem Technologies-Micro-And Nanosystems-Information Storage and Processing Systems",
title = "Adsorption-desorption noise in plasmonic chemical/biological sensors for multiple analyte environment",
volume = "16",
number = "5",
pages = "735-743",
doi = "10.1007/s00542-010-1043-7"
}

Jakšić, O., Jakšić, Z.,& Matovic, J.. (2010). Adsorption-desorption noise in plasmonic chemical/biological sensors for multiple analyte environment. in Microsystem Technologies-Micro-And Nanosystems-Information Storage and Processing Systems
Springer Heidelberg, Heidelberg., 16(5), 735-743.
https://doi.org/10.1007/s00542-010-1043-7

Jakšić O, Jakšić Z, Matovic J. Adsorption-desorption noise in plasmonic chemical/biological sensors for multiple analyte environment. in Microsystem Technologies-Micro-And Nanosystems-Information Storage and Processing Systems. 2010;16(5):735-743.
doi:10.1007/s00542-010-1043-7 .

Jakšić, Olga, Jakšić, Zoran, Matovic, Jovan, "Adsorption-desorption noise in plasmonic chemical/biological sensors for multiple analyte environment" in Microsystem Technologies-Micro-And Nanosystems-Information Storage and Processing Systems, 16, no. 5 (2010):735-743,
https://doi.org/10.1007/s00542-010-1043-7 . .

TY  - CONF
AU  - Jakšić, Olga
AU  - Jakšić, Zoran
AU  - Matovic, Jovan
PY  - 2009
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/552
AB  - We analyzed the intrinsic noise of plasmonic sensors caused by the adsorption-desorption of gaseous analytes on the sensor surface. We analyzed a general situation when there is a larger number of different species in the environment. We developed our model and applied it to calculate various analyte mixtures, including some environmental pollutants, toxic and dangerous substances. The spectral density of mean square refractive index fluctuations follows a dependence similar to that of generation-recombination noise in photodetectors, flat at lower frequencies and sharply decreasing at higher. Some of the calculated noise levels are well within the detection range of conventional surface plasmon resonance sensors. One of the obvious conclusions is that AD noise may be an important limiting factor in monitoring process kinetics by nanoplasmonic sensors. An AD noise peak is observed in temperature dependence of mean square refractive index fluctuations, thus sensor operating temperature may be optimized to obtain larger signal to noise ratio. A significant property of AD noise is its increase with the plasmon sensor area decrease, which means that it will be even more pronounced in modern nanoplasmonic devices. Our consideration is valid both for conventional surface plasmon resonance devices and for general nanoplasmonic devices. This research could be of importance in diverse areas such as environmental sensing, homeland security, forensic applications, life sciences, etc.
C3  - Smart Sensors, Actuators, and Mems Iv
T1  - Adsorption-Desorption Noise in Plasmonic Chemical/Biological Sensors in Multiple Analyte Environment
VL  - 7362
DO  - 10.1117/12.821663
ER  - 

@conference{
author = "Jakšić, Olga and Jakšić, Zoran and Matovic, Jovan",
year = "2009",
abstract = "We analyzed the intrinsic noise of plasmonic sensors caused by the adsorption-desorption of gaseous analytes on the sensor surface. We analyzed a general situation when there is a larger number of different species in the environment. We developed our model and applied it to calculate various analyte mixtures, including some environmental pollutants, toxic and dangerous substances. The spectral density of mean square refractive index fluctuations follows a dependence similar to that of generation-recombination noise in photodetectors, flat at lower frequencies and sharply decreasing at higher. Some of the calculated noise levels are well within the detection range of conventional surface plasmon resonance sensors. One of the obvious conclusions is that AD noise may be an important limiting factor in monitoring process kinetics by nanoplasmonic sensors. An AD noise peak is observed in temperature dependence of mean square refractive index fluctuations, thus sensor operating temperature may be optimized to obtain larger signal to noise ratio. A significant property of AD noise is its increase with the plasmon sensor area decrease, which means that it will be even more pronounced in modern nanoplasmonic devices. Our consideration is valid both for conventional surface plasmon resonance devices and for general nanoplasmonic devices. This research could be of importance in diverse areas such as environmental sensing, homeland security, forensic applications, life sciences, etc.",
journal = "Smart Sensors, Actuators, and Mems Iv",
title = "Adsorption-Desorption Noise in Plasmonic Chemical/Biological Sensors in Multiple Analyte Environment",
volume = "7362",
doi = "10.1117/12.821663"
}

Jakšić, O., Jakšić, Z.,& Matovic, J.. (2009). Adsorption-Desorption Noise in Plasmonic Chemical/Biological Sensors in Multiple Analyte Environment. in Smart Sensors, Actuators, and Mems Iv, 7362.
https://doi.org/10.1117/12.821663

Jakšić O, Jakšić Z, Matovic J. Adsorption-Desorption Noise in Plasmonic Chemical/Biological Sensors in Multiple Analyte Environment. in Smart Sensors, Actuators, and Mems Iv. 2009;7362.
doi:10.1117/12.821663 .

Jakšić, Olga, Jakšić, Zoran, Matovic, Jovan, "Adsorption-Desorption Noise in Plasmonic Chemical/Biological Sensors in Multiple Analyte Environment" in Smart Sensors, Actuators, and Mems Iv, 7362 (2009),
https://doi.org/10.1117/12.821663 . .

TY  - JOUR
AU  - Jakšić, Zoran
AU  - Jakšić, Olga
AU  - Matovic, Jovan
PY  - 2009
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/519
AB  - We considered figures of merit for chemical and biological sensors based on plasmonic structures and utilizing adsorption/desorption mechanism. The operation of these devices in general is limited by noise determining the minimum detectable refractive-index change. We dedicated our work to the intrinsic noise mechanisms connected with the plasmonic process itself. In contrast, most of the available literature is almost exclusively dedicated to the external noise sources (illumination source and photodetector). Reviewing the refractive-index fluctuations caused by thermal, adsorption-desorption and 1/f noise, we observed a striking analogy between the qualitative behavior of noise in (nano) plasmonic devices and that in semiconductor infrared detectors. The power spectral densities for noise in both of these have an almost identical shape; the adsorption-desorption noise corresponds to generation-recombination processes in detectors, while the other two mechanisms exist in the both types of the devices. Thus the large and mature existing apparatus for infrared detector noise analysis may be applied to the plasmonic sensors. Based on the observed analogy, we formulated the noise-equivalent refractive-index and the specific detectivity as the figures of merit to analyze the ultimate performance of plasmon sensors. The approach is valid for conventional surface plasmon resonance sensors, but also for nanoplasmonic and metamaterial-based devices.
PB  - Spie-Soc Photo-Optical Instrumentation Engineers, Bellingham
T2  - Journal of Nanophotonics
T1  - Performance limits to the operation of nanoplasmonic chemical sensors: noise-equivalent refractive index and detectivity
VL  - 3
DO  - 10.1117/1.3124792
ER  - 

@article{
author = "Jakšić, Zoran and Jakšić, Olga and Matovic, Jovan",
year = "2009",
abstract = "We considered figures of merit for chemical and biological sensors based on plasmonic structures and utilizing adsorption/desorption mechanism. The operation of these devices in general is limited by noise determining the minimum detectable refractive-index change. We dedicated our work to the intrinsic noise mechanisms connected with the plasmonic process itself. In contrast, most of the available literature is almost exclusively dedicated to the external noise sources (illumination source and photodetector). Reviewing the refractive-index fluctuations caused by thermal, adsorption-desorption and 1/f noise, we observed a striking analogy between the qualitative behavior of noise in (nano) plasmonic devices and that in semiconductor infrared detectors. The power spectral densities for noise in both of these have an almost identical shape; the adsorption-desorption noise corresponds to generation-recombination processes in detectors, while the other two mechanisms exist in the both types of the devices. Thus the large and mature existing apparatus for infrared detector noise analysis may be applied to the plasmonic sensors. Based on the observed analogy, we formulated the noise-equivalent refractive-index and the specific detectivity as the figures of merit to analyze the ultimate performance of plasmon sensors. The approach is valid for conventional surface plasmon resonance sensors, but also for nanoplasmonic and metamaterial-based devices.",
publisher = "Spie-Soc Photo-Optical Instrumentation Engineers, Bellingham",
journal = "Journal of Nanophotonics",
title = "Performance limits to the operation of nanoplasmonic chemical sensors: noise-equivalent refractive index and detectivity",
volume = "3",
doi = "10.1117/1.3124792"
}

Jakšić, Z., Jakšić, O.,& Matovic, J.. (2009). Performance limits to the operation of nanoplasmonic chemical sensors: noise-equivalent refractive index and detectivity. in Journal of Nanophotonics
Spie-Soc Photo-Optical Instrumentation Engineers, Bellingham., 3.
https://doi.org/10.1117/1.3124792

Jakšić Z, Jakšić O, Matovic J. Performance limits to the operation of nanoplasmonic chemical sensors: noise-equivalent refractive index and detectivity. in Journal of Nanophotonics. 2009;3.
doi:10.1117/1.3124792 .

Jakšić, Zoran, Jakšić, Olga, Matovic, Jovan, "Performance limits to the operation of nanoplasmonic chemical sensors: noise-equivalent refractive index and detectivity" in Journal of Nanophotonics, 3 (2009),
https://doi.org/10.1117/1.3124792 . .

TY  - CONF
AU  - Jakšić, Zoran
AU  - Jakšić, Olga
AU  - Matovic, Jovan
PY  - 2008
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/419
AB  - We consider some intrinsic noise mechanisms appearing in nanophotonic sensors based on plasmonic structures and surface plasmon-polaritons. We analyze the photonic Johnson-Nyquist fluctuations and the adsorption and desorption (AD) of analyte molecules at the sensing interface, as reflected through the refractive index and electromagnetic field changes. In some situations AD noise is especially large and may significantly influence the performance of nanoplasmonic sensors.
PB  - Institute of Electrical and Electronics Engineers Inc.
C3  - 26th International Conference on Microelectronics, Vols 1 and 2, Proceedings
T1  - A consideration of optical noise figures of adsorption-based nanophotonic sensors
SP  - 91
DO  - 10.1109/ICMEL.2008.4559230
ER  - 

@conference{
author = "Jakšić, Zoran and Jakšić, Olga and Matovic, Jovan",
year = "2008",
abstract = "We consider some intrinsic noise mechanisms appearing in nanophotonic sensors based on plasmonic structures and surface plasmon-polaritons. We analyze the photonic Johnson-Nyquist fluctuations and the adsorption and desorption (AD) of analyte molecules at the sensing interface, as reflected through the refractive index and electromagnetic field changes. In some situations AD noise is especially large and may significantly influence the performance of nanoplasmonic sensors.",
publisher = "Institute of Electrical and Electronics Engineers Inc.",
journal = "26th International Conference on Microelectronics, Vols 1 and 2, Proceedings",
title = "A consideration of optical noise figures of adsorption-based nanophotonic sensors",
pages = "91",
doi = "10.1109/ICMEL.2008.4559230"
}

Jakšić, Z., Jakšić, O.,& Matovic, J.. (2008). A consideration of optical noise figures of adsorption-based nanophotonic sensors. in 26th International Conference on Microelectronics, Vols 1 and 2, Proceedings
Institute of Electrical and Electronics Engineers Inc.., 91.
https://doi.org/10.1109/ICMEL.2008.4559230

Jakšić Z, Jakšić O, Matovic J. A consideration of optical noise figures of adsorption-based nanophotonic sensors. in 26th International Conference on Microelectronics, Vols 1 and 2, Proceedings. 2008;:91.
doi:10.1109/ICMEL.2008.4559230 .

Jakšić, Zoran, Jakšić, Olga, Matovic, Jovan, "A consideration of optical noise figures of adsorption-based nanophotonic sensors" in 26th International Conference on Microelectronics, Vols 1 and 2, Proceedings (2008):91,
https://doi.org/10.1109/ICMEL.2008.4559230 . .