TY  - CONF
AU  - Radojković, Bojana
AU  - Ristić, Slavica
AU  - Polić, Suzana R.
AU  - Jegdić, Bore
AU  - Krmpot, Aleksandar
AU  - Salatić, Branislav
AU  - Vučetić, Filip
PY  - 2016
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/6381
AB  - A large number of metals and alloys are widely used in the defense industry, not only in weaponry and defense equipment, but also for communications equipment and infrastructure. These materials are often exposed to extreme condition: high or low temperatures, humidity, chemical agents, wear and so on. They have to have the ability to withstand corrosion, temperature extremes and wear. Different types of weapons and equipment require adequate maintenance and cleaning. As an efficient cleaning method, lasers are widely used in many areas for different type of materials. This paper presents the results of the laser cleaning effects on tarnished brass plate. Nd:YAG and Er:Glass lasers were used to clean the tarnish layer from surface. Effects on the laser irradiated zones were investigated by optical and SEM microscopy and EDX analysis. Also surface's profile roughness and surface hardness were measured. Some parameters for successfully and safely cleaning of brass surface without degrading the surrounding material were determined.
PB  - Belgrade : The Military Technical Institute
C3  - Proceedings - 7th International scientific conference on defensive technologies-proceedings, OTEH 2016, 6-7 October 2016, Belgrade, Serbia
T1  - Lasers possibilities in brass surface cleaning
SP  - 603
EP  - 608
UR  - https://hdl.handle.net/21.15107/rcub_cer_6381
ER  - 

@conference{
author = "Radojković, Bojana and Ristić, Slavica and Polić, Suzana R. and Jegdić, Bore and Krmpot, Aleksandar and Salatić, Branislav and Vučetić, Filip",
year = "2016",
abstract = "A large number of metals and alloys are widely used in the defense industry, not only in weaponry and defense equipment, but also for communications equipment and infrastructure. These materials are often exposed to extreme condition: high or low temperatures, humidity, chemical agents, wear and so on. They have to have the ability to withstand corrosion, temperature extremes and wear. Different types of weapons and equipment require adequate maintenance and cleaning. As an efficient cleaning method, lasers are widely used in many areas for different type of materials. This paper presents the results of the laser cleaning effects on tarnished brass plate. Nd:YAG and Er:Glass lasers were used to clean the tarnish layer from surface. Effects on the laser irradiated zones were investigated by optical and SEM microscopy and EDX analysis. Also surface's profile roughness and surface hardness were measured. Some parameters for successfully and safely cleaning of brass surface without degrading the surrounding material were determined.",
publisher = "Belgrade : The Military Technical Institute",
journal = "Proceedings - 7th International scientific conference on defensive technologies-proceedings, OTEH 2016, 6-7 October 2016, Belgrade, Serbia",
title = "Lasers possibilities in brass surface cleaning",
pages = "603-608",
url = "https://hdl.handle.net/21.15107/rcub_cer_6381"
}

Radojković, B., Ristić, S., Polić, S. R., Jegdić, B., Krmpot, A., Salatić, B.,& Vučetić, F.. (2016). Lasers possibilities in brass surface cleaning. in Proceedings - 7th International scientific conference on defensive technologies-proceedings, OTEH 2016, 6-7 October 2016, Belgrade, Serbia
Belgrade : The Military Technical Institute., 603-608.
https://hdl.handle.net/21.15107/rcub_cer_6381

Radojković B, Ristić S, Polić SR, Jegdić B, Krmpot A, Salatić B, Vučetić F. Lasers possibilities in brass surface cleaning. in Proceedings - 7th International scientific conference on defensive technologies-proceedings, OTEH 2016, 6-7 October 2016, Belgrade, Serbia. 2016;:603-608.
https://hdl.handle.net/21.15107/rcub_cer_6381 .

Radojković, Bojana, Ristić, Slavica, Polić, Suzana R., Jegdić, Bore, Krmpot, Aleksandar, Salatić, Branislav, Vučetić, Filip, "Lasers possibilities in brass surface cleaning" in Proceedings - 7th International scientific conference on defensive technologies-proceedings, OTEH 2016, 6-7 October 2016, Belgrade, Serbia (2016):603-608,
https://hdl.handle.net/21.15107/rcub_cer_6381 .

TY  - CONF
AU  - Radojković, Bojana
AU  - Ristić, Slavica
AU  - Polić, Suzana R.
AU  - Krmpot, Aleksandar
AU  - Salatić, Branislav
AU  - Orlić, Jovana
AU  - Vučetić, Filip
PY  - 2016
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/6164
AB  - The use of lasers in the conservation of artefacts plays an important role since its posibilities of safe, efficient and efective cleaning on complex surfaces and wide range of materials. This paper presents the results of the laser cleaning effects on ceramic medieval artefacts originated from archaeological sites from region of Tyre and Sidon, Lebanon and naturally tarnished brass plate (unknown origin). Nd:YAG and Er:Glass lasers were used to clean unwanted layers from artefact surface. Before these investigations, some preliminary analyses were conducted on the comparable contemporary samples. Effects on the laser irradiated zones were investigated by optical and SEM microscopy and EDX analysis. LIBS and XRF were used for the morphological and chemical analysis of laser radiation impact on the examined materials. Also surface's profile roughness and surface hardness were measured. Some parameters for successfully and safely cleaning of brass surface without degrading the surrounding material were determined.
PB  - Budapest: International Measurement Confederation (IMEKO)
C3  - Proceedings of IMEKO International Conference on Metrology for Archaeology and Cultural Heritage (MetroArchaeo 2016)
T1  - XRF and LIBS measuring on metal and ceramic  laser-cleaned surfaces
SP  - 71
EP  - 76
UR  - https://hdl.handle.net/21.15107/rcub_cer_6164
ER  - 

@conference{
author = "Radojković, Bojana and Ristić, Slavica and Polić, Suzana R. and Krmpot, Aleksandar and Salatić, Branislav and Orlić, Jovana and Vučetić, Filip",
year = "2016",
abstract = "The use of lasers in the conservation of artefacts plays an important role since its posibilities of safe, efficient and efective cleaning on complex surfaces and wide range of materials. This paper presents the results of the laser cleaning effects on ceramic medieval artefacts originated from archaeological sites from region of Tyre and Sidon, Lebanon and naturally tarnished brass plate (unknown origin). Nd:YAG and Er:Glass lasers were used to clean unwanted layers from artefact surface. Before these investigations, some preliminary analyses were conducted on the comparable contemporary samples. Effects on the laser irradiated zones were investigated by optical and SEM microscopy and EDX analysis. LIBS and XRF were used for the morphological and chemical analysis of laser radiation impact on the examined materials. Also surface's profile roughness and surface hardness were measured. Some parameters for successfully and safely cleaning of brass surface without degrading the surrounding material were determined.",
publisher = "Budapest: International Measurement Confederation (IMEKO)",
journal = "Proceedings of IMEKO International Conference on Metrology for Archaeology and Cultural Heritage (MetroArchaeo 2016)",
title = "XRF and LIBS measuring on metal and ceramic  laser-cleaned surfaces",
pages = "71-76",
url = "https://hdl.handle.net/21.15107/rcub_cer_6164"
}

Radojković, B., Ristić, S., Polić, S. R., Krmpot, A., Salatić, B., Orlić, J.,& Vučetić, F.. (2016). XRF and LIBS measuring on metal and ceramic  laser-cleaned surfaces. in Proceedings of IMEKO International Conference on Metrology for Archaeology and Cultural Heritage (MetroArchaeo 2016)
Budapest: International Measurement Confederation (IMEKO)., 71-76.
https://hdl.handle.net/21.15107/rcub_cer_6164

Radojković B, Ristić S, Polić SR, Krmpot A, Salatić B, Orlić J, Vučetić F. XRF and LIBS measuring on metal and ceramic  laser-cleaned surfaces. in Proceedings of IMEKO International Conference on Metrology for Archaeology and Cultural Heritage (MetroArchaeo 2016). 2016;:71-76.
https://hdl.handle.net/21.15107/rcub_cer_6164 .

Radojković, Bojana, Ristić, Slavica, Polić, Suzana R., Krmpot, Aleksandar, Salatić, Branislav, Orlić, Jovana, Vučetić, Filip, "XRF and LIBS measuring on metal and ceramic  laser-cleaned surfaces" in Proceedings of IMEKO International Conference on Metrology for Archaeology and Cultural Heritage (MetroArchaeo 2016) (2016):71-76,
https://hdl.handle.net/21.15107/rcub_cer_6164 .