TY  - CONF
AU  - Pavlović, Miomir
AU  - Pavlović, Lj. J.
AU  - Lačnjevac, Uroš
AU  - Nikolić, Nebojša D.
AU  - Tomić, Milorad V.
PY  - 2010
UR  - http://www.aseee.eu/index.php/rsesee2-home
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/3530
AB  - Iron deposits obtained at high current densities and overpotentials are very important from a technological point of view. It has been stated that the open and porous structures of copper or iron deposits obtained at high current densities were ideally suited for use as electrodes in electrochemical devices such as fuel cells, batteries and chemical sensors, while the extremely high surface area is relevant for evaluating some electrochemical reactions. Mainly two types of electrolytes were investigated and these were based on sulfate and chloride electrolytes. With increasing duration of electrolysis, dendrites merge, which is unacceptable for the case of further application. These deposits must be grinded in order to obtain powders. However, in the range of lower acidity the deposits become powdery and, in some cases, may be spongy and sticky. Generally, up to now research indicates that electrodeposition of Fe powders have two steps, deposition of fragile film and grinding. It must be emphasized that we tried and succeeded to obtain Fe powders without grinding process. The aim of this work was to investigate electrodeposition processes of Fe powders from sulfate and chloride electrolytes and morphologies of powder as a function of type of electrolyte and current density.
PB  - Serbian Chemical Society, Belgrade
C3  - Second Regional Symposium on Electrochemistry South-East Europe, RSE-SEE, Program and Book of Abstracts
T1  - Electrodeposition of iron powder particles of different characteristics
SP  - 136
EP  - 136
UR  - https://hdl.handle.net/21.15107/rcub_cer_3530
ER  - 

@conference{
author = "Pavlović, Miomir and Pavlović, Lj. J. and Lačnjevac, Uroš and Nikolić, Nebojša D. and Tomić, Milorad V.",
year = "2010",
abstract = "Iron deposits obtained at high current densities and overpotentials are very important from a technological point of view. It has been stated that the open and porous structures of copper or iron deposits obtained at high current densities were ideally suited for use as electrodes in electrochemical devices such as fuel cells, batteries and chemical sensors, while the extremely high surface area is relevant for evaluating some electrochemical reactions. Mainly two types of electrolytes were investigated and these were based on sulfate and chloride electrolytes. With increasing duration of electrolysis, dendrites merge, which is unacceptable for the case of further application. These deposits must be grinded in order to obtain powders. However, in the range of lower acidity the deposits become powdery and, in some cases, may be spongy and sticky. Generally, up to now research indicates that electrodeposition of Fe powders have two steps, deposition of fragile film and grinding. It must be emphasized that we tried and succeeded to obtain Fe powders without grinding process. The aim of this work was to investigate electrodeposition processes of Fe powders from sulfate and chloride electrolytes and morphologies of powder as a function of type of electrolyte and current density.",
publisher = "Serbian Chemical Society, Belgrade",
journal = "Second Regional Symposium on Electrochemistry South-East Europe, RSE-SEE, Program and Book of Abstracts",
title = "Electrodeposition of iron powder particles of different characteristics",
pages = "136-136",
url = "https://hdl.handle.net/21.15107/rcub_cer_3530"
}

Pavlović, M., Pavlović, Lj. J., Lačnjevac, U., Nikolić, N. D.,& Tomić, M. V.. (2010). Electrodeposition of iron powder particles of different characteristics. in Second Regional Symposium on Electrochemistry South-East Europe, RSE-SEE, Program and Book of Abstracts
Serbian Chemical Society, Belgrade., 136-136.
https://hdl.handle.net/21.15107/rcub_cer_3530

Pavlović M, Pavlović LJ, Lačnjevac U, Nikolić ND, Tomić MV. Electrodeposition of iron powder particles of different characteristics. in Second Regional Symposium on Electrochemistry South-East Europe, RSE-SEE, Program and Book of Abstracts. 2010;:136-136.
https://hdl.handle.net/21.15107/rcub_cer_3530 .

Pavlović, Miomir, Pavlović, Lj. J., Lačnjevac, Uroš, Nikolić, Nebojša D., Tomić, Milorad V., "Electrodeposition of iron powder particles of different characteristics" in Second Regional Symposium on Electrochemistry South-East Europe, RSE-SEE, Program and Book of Abstracts (2010):136-136,
https://hdl.handle.net/21.15107/rcub_cer_3530 .

TY  - JOUR
AU  - Terzić, A.
AU  - Pavlović, Lj.
AU  - Milutinović Nikolić, Aleksandra
PY  - 2006
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/229
AB  - In this paper, the relationship between the creeping effect and mineralogical characteristics of the applied binding phase for various refractory materials (high-alumina materials, with high or low impurity content, tar bonded either magnesite or dolomite materials and silicate bonded chrom-magnesite materials) is presented. The mechanism of creeping is analyzed and the activation energy for creep for each investigated material is obtained and discussed. All investigated materials are creep sensitive under investigated conditions and have similar activation energies for creep except high-alumina refractories with a low impurity content.
AB  - U radu je data veza puzanja vatrostalnih materijala i mineraloških karakteristika vezivnih faza za različite vatrostalne materijale (visokoaluminatne, katranom vezane magnezitne, katranom vezane dolomitne materijale i silikatno vezane hrommagnezitne materijale). Pored toga analiziran je mehanizam puzanja i proračunata je energija aktivacije procesa puzanja za svaki od ispitivanih materijala.
PB  - International Institute for the Science of Sintering, Beograd
T2  - Science of Sintering
T1  - Influence of the phase composition of refractory materials on creep
VL  - 38
IS  - 3
SP  - 255
EP  - 263
DO  - 10.2298/SOS0603255T
ER  - 

@article{
author = "Terzić, A. and Pavlović, Lj. and Milutinović Nikolić, Aleksandra",
year = "2006",
abstract = "In this paper, the relationship between the creeping effect and mineralogical characteristics of the applied binding phase for various refractory materials (high-alumina materials, with high or low impurity content, tar bonded either magnesite or dolomite materials and silicate bonded chrom-magnesite materials) is presented. The mechanism of creeping is analyzed and the activation energy for creep for each investigated material is obtained and discussed. All investigated materials are creep sensitive under investigated conditions and have similar activation energies for creep except high-alumina refractories with a low impurity content., U radu je data veza puzanja vatrostalnih materijala i mineraloških karakteristika vezivnih faza za različite vatrostalne materijale (visokoaluminatne, katranom vezane magnezitne, katranom vezane dolomitne materijale i silikatno vezane hrommagnezitne materijale). Pored toga analiziran je mehanizam puzanja i proračunata je energija aktivacije procesa puzanja za svaki od ispitivanih materijala.",
publisher = "International Institute for the Science of Sintering, Beograd",
journal = "Science of Sintering",
title = "Influence of the phase composition of refractory materials on creep",
volume = "38",
number = "3",
pages = "255-263",
doi = "10.2298/SOS0603255T"
}

Terzić, A., Pavlović, Lj.,& Milutinović Nikolić, A.. (2006). Influence of the phase composition of refractory materials on creep. in Science of Sintering
International Institute for the Science of Sintering, Beograd., 38(3), 255-263.
https://doi.org/10.2298/SOS0603255T

Terzić A, Pavlović L, Milutinović Nikolić A. Influence of the phase composition of refractory materials on creep. in Science of Sintering. 2006;38(3):255-263.
doi:10.2298/SOS0603255T .

Terzić, A., Pavlović, Lj., Milutinović Nikolić, Aleksandra, "Influence of the phase composition of refractory materials on creep" in Science of Sintering, 38, no. 3 (2006):255-263,
https://doi.org/10.2298/SOS0603255T . .

TY  - JOUR
AU  - Pavlović, Miomir
AU  - Pavlović, Lj.J.
AU  - Ivanović, Evica
AU  - Radmilović, V.
AU  - Popov, Konstantin I.
PY  - 2001
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/28
AB  - The quantitative microstructural analysis and the sieve analysis of copper powder as well as the scanning electron microscopy analysis of the copper powders particles were performed. It was found that the structure of the copper powder particles determines the apparent density of copper powder. The powder particles from the same fractions of different powders occupy approximately the same volume, but the structure of metallic copper is very different. This causes the difference in apparent densities of copper powder obtained under different conditions. The more dendritic is the structure of powder particles the smaller is the apparent density of copper powder.
AB  - Izvršena je kvalitativna mikrostrukturna i granulometrijska analiza bakarnih prahova kao i analiza morfologije i strukture čestica praha pomoću skenirajuće elektronske mikroskopije (SEM). Ustanovljeno je da struktura čestica praha određuje nasipnu masu bakarnog praha. Čestice iste frakcije različitih prahova zauzimaju otprilike istu zapreminu, ali je struktura metalnog bakra različita. Ovo uzrokuje razlike u nasipnoj masi bakarnog praha dobijenog pod različitim uslovima. Što je struktura čestica više dendritična to je manja nasipna masa bakarnog praha.
PB  - Serbian Chemical Society
T2  - Journal of the Serbian Chemical Society
T1  - The effect of particle structure on apparent density of electrolytic copper powder
T1  - Uticaj strukture čestica na nasipnu masu elektrolitički dobijenog bakarnog praha
VL  - 66
IS  - 11-12
SP  - 923
EP  - 933
UR  - https://hdl.handle.net/21.15107/rcub_cer_28
ER  - 

@article{
author = "Pavlović, Miomir and Pavlović, Lj.J. and Ivanović, Evica and Radmilović, V. and Popov, Konstantin I.",
year = "2001",
abstract = "The quantitative microstructural analysis and the sieve analysis of copper powder as well as the scanning electron microscopy analysis of the copper powders particles were performed. It was found that the structure of the copper powder particles determines the apparent density of copper powder. The powder particles from the same fractions of different powders occupy approximately the same volume, but the structure of metallic copper is very different. This causes the difference in apparent densities of copper powder obtained under different conditions. The more dendritic is the structure of powder particles the smaller is the apparent density of copper powder., Izvršena je kvalitativna mikrostrukturna i granulometrijska analiza bakarnih prahova kao i analiza morfologije i strukture čestica praha pomoću skenirajuće elektronske mikroskopije (SEM). Ustanovljeno je da struktura čestica praha određuje nasipnu masu bakarnog praha. Čestice iste frakcije različitih prahova zauzimaju otprilike istu zapreminu, ali je struktura metalnog bakra različita. Ovo uzrokuje razlike u nasipnoj masi bakarnog praha dobijenog pod različitim uslovima. Što je struktura čestica više dendritična to je manja nasipna masa bakarnog praha.",
publisher = "Serbian Chemical Society",
journal = "Journal of the Serbian Chemical Society",
title = "The effect of particle structure on apparent density of electrolytic copper powder, Uticaj strukture čestica na nasipnu masu elektrolitički dobijenog bakarnog praha",
volume = "66",
number = "11-12",
pages = "923-933",
url = "https://hdl.handle.net/21.15107/rcub_cer_28"
}

Pavlović, M., Pavlović, Lj.J., Ivanović, E., Radmilović, V.,& Popov, K. I.. (2001). The effect of particle structure on apparent density of electrolytic copper powder. in Journal of the Serbian Chemical Society
Serbian Chemical Society., 66(11-12), 923-933.
https://hdl.handle.net/21.15107/rcub_cer_28

Pavlović M, Pavlović L, Ivanović E, Radmilović V, Popov KI. The effect of particle structure on apparent density of electrolytic copper powder. in Journal of the Serbian Chemical Society. 2001;66(11-12):923-933.
https://hdl.handle.net/21.15107/rcub_cer_28 .

Pavlović, Miomir, Pavlović, Lj.J., Ivanović, Evica, Radmilović, V., Popov, Konstantin I., "The effect of particle structure on apparent density of electrolytic copper powder" in Journal of the Serbian Chemical Society, 66, no. 11-12 (2001):923-933,
https://hdl.handle.net/21.15107/rcub_cer_28 .