TY  - CONF
AU  - Stević, Zoran
AU  - Begenišić, Borivoje
AU  - Murgaski, Dušan
AU  - Stajić, Luka
AU  - Petronić, Sanja
AU  - Radovanović, Ilija
AU  - Polić, Suzana R.
PY  - 2023
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/7067
AB  - Electric vehicles have become increasingly popular in recent years due to general global
warming but also due to technological advances, cost reductions, increased battery charging capabilities,
etc. In order to achieve the most outstanding possible efficiency of the vehicle, the thermal
management system of electric vehicles must be efficient throughout the year. One of the problems
is that the temperature distribution in the induction motor is not uniform, so that local overheating
can occur. Thermoelectric materials make it possible to convert a temperature gradient into electrical
energy. The material properties of the motor impose a temperature limit. This paper will describe
the materials used for TEE and their impact on the efficiency of electric vehicles. A thermal
model represents the temperature distribution within the induction motor, batteries and the entire
vehicle, as well as problems that may occur during operation. Convective heat transfer plays an important
role in better performance in battery cell development. In particular, the effect of temperature
has a significant impact on the behaviour of the battery during acceleration and regenerative
braking events. This paper investigates the temperature distribution inside the battery.
AB  - Električna vozila poslednjih godina postaju sve popularnija usled opšteg globalnog zagrevanja, ali
i usled napretka tehnologije, smanjenja troškova, povećavanja mogućnosti punjenja baterija itd. Za
postizanje što veće efikasnosti vozila potrebno je da sistem termičkog upravljanja električnim
vozilima bude efikasan tokom cele godine. Jedan od problema je da raspodela temperature u
pogonskom motoru nije ravnomerna pa može doći do lokalnog pregrevanja. Termoelektrični
materijali omogućavaju pretvaranje temperaturnog gradijenta u električnu energiju. Svojstva
materijala motora nameću temperaturnu granicu. U ovom radu biće opisani materijali koje se
koriste za termoelektrične elemente i njihov uticaj na efikasnost električnih vozila. Termalni model
se koristi da bi se predstavila distribuciju temperature unutar indukcionog motora, baterija i celog
vozila, kao i problemi koji se mogu javiti tokom rada. Konvektivni prenos toplote ima važnu ulogu
za što bolje performanse u razvoju baterijske ćelije. Posebno, raspodela toplote ima značajan uticaj
na ponašanje baterije tokom događaja ubrzanja i regenerativnog kočenja. U ovom radu se istražuje
i analizira distribucija temperature unutar baterije.
PB  - Union of Mechanical and Electrical Engineers and Technicains of Serbia (SMEITS)
PB  - Society for Renewable Electrical Power Sources
C3  - Proceedings - 11th International Conference on Renewable Electrical Power Sources
T1  - Značaj distribucije toplote u savremenim energetski efikasnim električnim vozilima
T1  - Importance of heat distribution in modern energy efficient electrical vehicles
SP  - 227
EP  - 231
UR  - https://hdl.handle.net/21.15107/rcub_cer_7067
ER  - 

@conference{
author = "Stević, Zoran and Begenišić, Borivoje and Murgaski, Dušan and Stajić, Luka and Petronić, Sanja and Radovanović, Ilija and Polić, Suzana R.",
year = "2023",
abstract = "Electric vehicles have become increasingly popular in recent years due to general global
warming but also due to technological advances, cost reductions, increased battery charging capabilities,
etc. In order to achieve the most outstanding possible efficiency of the vehicle, the thermal
management system of electric vehicles must be efficient throughout the year. One of the problems
is that the temperature distribution in the induction motor is not uniform, so that local overheating
can occur. Thermoelectric materials make it possible to convert a temperature gradient into electrical
energy. The material properties of the motor impose a temperature limit. This paper will describe
the materials used for TEE and their impact on the efficiency of electric vehicles. A thermal
model represents the temperature distribution within the induction motor, batteries and the entire
vehicle, as well as problems that may occur during operation. Convective heat transfer plays an important
role in better performance in battery cell development. In particular, the effect of temperature
has a significant impact on the behaviour of the battery during acceleration and regenerative
braking events. This paper investigates the temperature distribution inside the battery., Električna vozila poslednjih godina postaju sve popularnija usled opšteg globalnog zagrevanja, ali
i usled napretka tehnologije, smanjenja troškova, povećavanja mogućnosti punjenja baterija itd. Za
postizanje što veće efikasnosti vozila potrebno je da sistem termičkog upravljanja električnim
vozilima bude efikasan tokom cele godine. Jedan od problema je da raspodela temperature u
pogonskom motoru nije ravnomerna pa može doći do lokalnog pregrevanja. Termoelektrični
materijali omogućavaju pretvaranje temperaturnog gradijenta u električnu energiju. Svojstva
materijala motora nameću temperaturnu granicu. U ovom radu biće opisani materijali koje se
koriste za termoelektrične elemente i njihov uticaj na efikasnost električnih vozila. Termalni model
se koristi da bi se predstavila distribuciju temperature unutar indukcionog motora, baterija i celog
vozila, kao i problemi koji se mogu javiti tokom rada. Konvektivni prenos toplote ima važnu ulogu
za što bolje performanse u razvoju baterijske ćelije. Posebno, raspodela toplote ima značajan uticaj
na ponašanje baterije tokom događaja ubrzanja i regenerativnog kočenja. U ovom radu se istražuje
i analizira distribucija temperature unutar baterije.",
publisher = "Union of Mechanical and Electrical Engineers and Technicains of Serbia (SMEITS), Society for Renewable Electrical Power Sources",
journal = "Proceedings - 11th International Conference on Renewable Electrical Power Sources",
title = "Značaj distribucije toplote u savremenim energetski efikasnim električnim vozilima, Importance of heat distribution in modern energy efficient electrical vehicles",
pages = "227-231",
url = "https://hdl.handle.net/21.15107/rcub_cer_7067"
}

Stević, Z., Begenišić, B., Murgaski, D., Stajić, L., Petronić, S., Radovanović, I.,& Polić, S. R.. (2023). Značaj distribucije toplote u savremenim energetski efikasnim električnim vozilima. in Proceedings - 11th International Conference on Renewable Electrical Power Sources
Union of Mechanical and Electrical Engineers and Technicains of Serbia (SMEITS)., 227-231.
https://hdl.handle.net/21.15107/rcub_cer_7067

Stević Z, Begenišić B, Murgaski D, Stajić L, Petronić S, Radovanović I, Polić SR. Značaj distribucije toplote u savremenim energetski efikasnim električnim vozilima. in Proceedings - 11th International Conference on Renewable Electrical Power Sources. 2023;:227-231.
https://hdl.handle.net/21.15107/rcub_cer_7067 .

Stević, Zoran, Begenišić, Borivoje, Murgaski, Dušan, Stajić, Luka, Petronić, Sanja, Radovanović, Ilija, Polić, Suzana R., "Značaj distribucije toplote u savremenim energetski efikasnim električnim vozilima" in Proceedings - 11th International Conference on Renewable Electrical Power Sources (2023):227-231,
https://hdl.handle.net/21.15107/rcub_cer_7067 .

TY  - CONF
AU  - Polić, Suzana R.
AU  - Srećković, Milesa
AU  - Stević, Zoran
AU  - Malović, Miodrag
AU  - Đurić, Miloš
PY  - 2022
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/5969
AB  - Heritološki fenomeni u oblasti istraživanja kompozitnih umetničkih dela, u vezi sa raznovrsnošću pristupa u kvalitativnim i kvantitativnim kriterijumima za izbor materijala, postavljaju složene zadatke u primeni instrumentalnih metoda, koje prethode izradi protokola za konzervaciju-restauraciju predmeta kulturne baštine. U ovom radu u fokusu je problem heritološke abdukcije, u heurističkoj proceni broja neophodnih analiza, odnosno deficita podataka u fragmentarnim strukturama koje su izraz umetničkog spontaniteta, a sa akcentom na fenomen praemissa minor u traganju za metodološki čvrstom platformom za interpretaciju podataka.
AB  - Taking into account the diversity of approaches in qualitative and quantitative criteria for material selection heritology phenomena in the field of research of composite art works set complex tasks in the application of instrumental methods, which precede the development of protocols for conservation and restoration of cultural heritage. The focus of this paper is on the problem of heritology abduction, particularly in the domain of heuristic assessment concerning the number of necessary analyses, i.e. the deficit of data in fragmentary structures, these being expressions of artistic spontaneity. At the same time, the paper also tackles the phenomenon of minor assumptions while pursuing a methodologically sound platform for interpreting data.
PB  - Belgrade : ETRAN Society / Београд : Друштво за ЕТРАН
C3  - Proceedings - LXVI ETRAN Conference, 6 ‐ 9 June, 2022, Novi Pazar, Serbia
T1  - Problem heritološke abdukcije u vezi sa instrumentalnim analizama materijala kulturne baštine
T1  - The problem of heritology abduction through instrumental analysis of cultural heritage materials
SP  - SSHE1.4 Page 1
EP  - SSHE1.4 Page 6
UR  - https://hdl.handle.net/21.15107/rcub_cer_5969
ER  - 

@conference{
author = "Polić, Suzana R. and Srećković, Milesa and Stević, Zoran and Malović, Miodrag and Đurić, Miloš",
year = "2022",
abstract = "Heritološki fenomeni u oblasti istraživanja kompozitnih umetničkih dela, u vezi sa raznovrsnošću pristupa u kvalitativnim i kvantitativnim kriterijumima za izbor materijala, postavljaju složene zadatke u primeni instrumentalnih metoda, koje prethode izradi protokola za konzervaciju-restauraciju predmeta kulturne baštine. U ovom radu u fokusu je problem heritološke abdukcije, u heurističkoj proceni broja neophodnih analiza, odnosno deficita podataka u fragmentarnim strukturama koje su izraz umetničkog spontaniteta, a sa akcentom na fenomen praemissa minor u traganju za metodološki čvrstom platformom za interpretaciju podataka., Taking into account the diversity of approaches in qualitative and quantitative criteria for material selection heritology phenomena in the field of research of composite art works set complex tasks in the application of instrumental methods, which precede the development of protocols for conservation and restoration of cultural heritage. The focus of this paper is on the problem of heritology abduction, particularly in the domain of heuristic assessment concerning the number of necessary analyses, i.e. the deficit of data in fragmentary structures, these being expressions of artistic spontaneity. At the same time, the paper also tackles the phenomenon of minor assumptions while pursuing a methodologically sound platform for interpreting data.",
publisher = "Belgrade : ETRAN Society / Београд : Друштво за ЕТРАН",
journal = "Proceedings - LXVI ETRAN Conference, 6 ‐ 9 June, 2022, Novi Pazar, Serbia",
title = "Problem heritološke abdukcije u vezi sa instrumentalnim analizama materijala kulturne baštine, The problem of heritology abduction through instrumental analysis of cultural heritage materials",
pages = "SSHE1.4 Page 1-SSHE1.4 Page 6",
url = "https://hdl.handle.net/21.15107/rcub_cer_5969"
}

Polić, S. R., Srećković, M., Stević, Z., Malović, M.,& Đurić, M.. (2022). Problem heritološke abdukcije u vezi sa instrumentalnim analizama materijala kulturne baštine. in Proceedings - LXVI ETRAN Conference, 6 ‐ 9 June, 2022, Novi Pazar, Serbia
Belgrade : ETRAN Society / Београд : Друштво за ЕТРАН., SSHE1.4 Page 1-SSHE1.4 Page 6.
https://hdl.handle.net/21.15107/rcub_cer_5969

Polić SR, Srećković M, Stević Z, Malović M, Đurić M. Problem heritološke abdukcije u vezi sa instrumentalnim analizama materijala kulturne baštine. in Proceedings - LXVI ETRAN Conference, 6 ‐ 9 June, 2022, Novi Pazar, Serbia. 2022;:SSHE1.4 Page 1-SSHE1.4 Page 6.
https://hdl.handle.net/21.15107/rcub_cer_5969 .

Polić, Suzana R., Srećković, Milesa, Stević, Zoran, Malović, Miodrag, Đurić, Miloš, "Problem heritološke abdukcije u vezi sa instrumentalnim analizama materijala kulturne baštine" in Proceedings - LXVI ETRAN Conference, 6 ‐ 9 June, 2022, Novi Pazar, Serbia (2022):SSHE1.4 Page 1-SSHE1.4 Page 6,
https://hdl.handle.net/21.15107/rcub_cer_5969 .

TY  - CONF
AU  - Polić, Suzana R.
AU  - Srećković, Milesa
AU  - Stević, Zoran
AU  - Bojanić, Slobodan
AU  - Tomić, Željka
PY  - 2022
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/5968
AB  - Primena veštačke inteligencije u zaštiti kulturne baštine, na ovom stepenu razvoja, odnosi se prevashodno na domen akvizicije podataka, koji mogu biti od značaja za stvaranje šire slike o sredstvima i metodama realizacije umetničkih dela. U ovom radu, istražuje se pitanje integracije naučnih znanja u kontekstu primene veštačke inteligencije, u vezi sa delima velikih formata, i to u domenima specifikuma organizacije materije, diferencijacije komponenti i njihovih elemenata, strukturnih planova i matrica koje daju kvalitet unutrašnje koherencije i grade performativnu snagu dela. Multidisciplinarna opservacija treba da doprinese procesu objektivizacije znanja, do koje se, prirodom predmeta istraživanja, može doći samo integracijom elemenata više nauka i naučnih disciplina.
AB  - The application of artificial intelligence in cultural heritage, at this degree of development, refers primarily to the domain of data acquisitions that may be important for the creation of a wider image on the funds and methods of the implementation of works of art. In this paper, the issue of integration of scientific knowledge is investigated in the context of the application of artificial intelligence regarding the works of large formats. It is the domains of the specifics of the organization of matter, the differentiation of components and their elements, structural plans and matrix that give the quality of internal coherence and build the performative power of the work. Multidisciplinary observation should contribute to the process of objectifying the knowledge, to which the nature of the course of research, can only be reached by the integration of elements of several sciences and scientific disciplines.
PB  - Belgrade : ETRAN Society / Београд : Друштво за ЕТРАН
C3  - Proceedings - LXVI ETRAN Conference, 6 ‐ 9, June, 2022, Novi Pazar, Serbia
T1  - Integracije naučnih znanja u primeni veštačke inteligencije u heritološkim problemima
T1  - Integration of scientific knowledge in the application of artificial intelligence in heritological problems
SP  - SSHE1.3 Page 1
EP  - SSHE1.3 Page 4
UR  - https://hdl.handle.net/21.15107/rcub_cer_5968
ER  - 

@conference{
author = "Polić, Suzana R. and Srećković, Milesa and Stević, Zoran and Bojanić, Slobodan and Tomić, Željka",
year = "2022",
abstract = "Primena veštačke inteligencije u zaštiti kulturne baštine, na ovom stepenu razvoja, odnosi se prevashodno na domen akvizicije podataka, koji mogu biti od značaja za stvaranje šire slike o sredstvima i metodama realizacije umetničkih dela. U ovom radu, istražuje se pitanje integracije naučnih znanja u kontekstu primene veštačke inteligencije, u vezi sa delima velikih formata, i to u domenima specifikuma organizacije materije, diferencijacije komponenti i njihovih elemenata, strukturnih planova i matrica koje daju kvalitet unutrašnje koherencije i grade performativnu snagu dela. Multidisciplinarna opservacija treba da doprinese procesu objektivizacije znanja, do koje se, prirodom predmeta istraživanja, može doći samo integracijom elemenata više nauka i naučnih disciplina., The application of artificial intelligence in cultural heritage, at this degree of development, refers primarily to the domain of data acquisitions that may be important for the creation of a wider image on the funds and methods of the implementation of works of art. In this paper, the issue of integration of scientific knowledge is investigated in the context of the application of artificial intelligence regarding the works of large formats. It is the domains of the specifics of the organization of matter, the differentiation of components and their elements, structural plans and matrix that give the quality of internal coherence and build the performative power of the work. Multidisciplinary observation should contribute to the process of objectifying the knowledge, to which the nature of the course of research, can only be reached by the integration of elements of several sciences and scientific disciplines.",
publisher = "Belgrade : ETRAN Society / Београд : Друштво за ЕТРАН",
journal = "Proceedings - LXVI ETRAN Conference, 6 ‐ 9, June, 2022, Novi Pazar, Serbia",
title = "Integracije naučnih znanja u primeni veštačke inteligencije u heritološkim problemima, Integration of scientific knowledge in the application of artificial intelligence in heritological problems",
pages = "SSHE1.3 Page 1-SSHE1.3 Page 4",
url = "https://hdl.handle.net/21.15107/rcub_cer_5968"
}

Polić, S. R., Srećković, M., Stević, Z., Bojanić, S.,& Tomić, Ž.. (2022). Integracije naučnih znanja u primeni veštačke inteligencije u heritološkim problemima. in Proceedings - LXVI ETRAN Conference, 6 ‐ 9, June, 2022, Novi Pazar, Serbia
Belgrade : ETRAN Society / Београд : Друштво за ЕТРАН., SSHE1.3 Page 1-SSHE1.3 Page 4.
https://hdl.handle.net/21.15107/rcub_cer_5968

Polić SR, Srećković M, Stević Z, Bojanić S, Tomić Ž. Integracije naučnih znanja u primeni veštačke inteligencije u heritološkim problemima. in Proceedings - LXVI ETRAN Conference, 6 ‐ 9, June, 2022, Novi Pazar, Serbia. 2022;:SSHE1.3 Page 1-SSHE1.3 Page 4.
https://hdl.handle.net/21.15107/rcub_cer_5968 .

Polić, Suzana R., Srećković, Milesa, Stević, Zoran, Bojanić, Slobodan, Tomić, Željka, "Integracije naučnih znanja u primeni veštačke inteligencije u heritološkim problemima" in Proceedings - LXVI ETRAN Conference, 6 ‐ 9, June, 2022, Novi Pazar, Serbia (2022):SSHE1.3 Page 1-SSHE1.3 Page 4,
https://hdl.handle.net/21.15107/rcub_cer_5968 .

TY  - CONF
AU  - Srećković, Milesa
AU  - Polić, Suzana R.
AU  - Stević, Zoran
AU  - Zarubica, Veljko
AU  - Ostojić, Stanko
PY  - 2022
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/5935
AB  - Kritička preispitivanja postupaka koji se delovanjem na materijale primenjuju u konzervaciji-restauraciji predmeta kulturne baštine, obuhvataju opšta i pojedinačna pitanja o upotrebi novih tehnologija, posebno lasera, u odnosu na klasične prilaze problematici zaštite artefakata, koji imaju arheološku, istorijsku ili umetničku vrednost. Pitanje etičnosti posmatra se sa više aspekata, koji se odnose na materijalna i nematerijalna postupanja prema predmetima zaštite, u smislu ispunjavanja zadate funkcije odabrane tehnike, a pod uslovima najvišeg stepena bezbednosti i ekološke zaštite. U ovom radu u fokusu istraživanja je karakterizacija proto-konceptualnih rešenja u primeni lasera na materijalima predmeta baštine, sa ciljem utvrđivanja eksplikatornih razlika u obrazlaganju potreba za primenu klasičnih pristupa konzervaciji-restauraciji kulturnog nasleđa, sa posebnim osvrtom u domenu tautoloških praksi
AB  - Critical re-examinations of the procedures applied on materials during the conservation-restoration of cultural heritage objects, including general and individual questions about the use of new technologies, especially lasers, in relation to classical approaches to the protection of artifacts of archaeological, historical or artistic value. The issue of ethics is viewed from several aspects related to tangible and intangible actions towards objects of protection, in terms of fulfilling the given function of the chosen technique, and under the conditions of the highest degree of safety and environmental protection. This paper focuses on the characterization of proto-conceptual solutions in the application of lasers on heritage materials, with the aim of determining explicative differences in explaining the need for classical approaches to conservation-restoration of cultural heritage, with special reference to tautological practices.
PB  - Belgrade : ETRAN Society
C3  - Proceedings - LXVI ETRAN Conference, 6 ‐ 9, June, 2022, Novi Pazar, Serbia
T1  - Proto-konceptualna rešenja u primeni lasera u heritologiji
T1  - Proto-conceptual solutions in the application of lasers in heritology
SP  - SSHE1.6.1
EP  - SSHE1.6.4
UR  - https://hdl.handle.net/21.15107/rcub_cer_5935
ER  - 

@conference{
author = "Srećković, Milesa and Polić, Suzana R. and Stević, Zoran and Zarubica, Veljko and Ostojić, Stanko",
year = "2022",
abstract = "Kritička preispitivanja postupaka koji se delovanjem na materijale primenjuju u konzervaciji-restauraciji predmeta kulturne baštine, obuhvataju opšta i pojedinačna pitanja o upotrebi novih tehnologija, posebno lasera, u odnosu na klasične prilaze problematici zaštite artefakata, koji imaju arheološku, istorijsku ili umetničku vrednost. Pitanje etičnosti posmatra se sa više aspekata, koji se odnose na materijalna i nematerijalna postupanja prema predmetima zaštite, u smislu ispunjavanja zadate funkcije odabrane tehnike, a pod uslovima najvišeg stepena bezbednosti i ekološke zaštite. U ovom radu u fokusu istraživanja je karakterizacija proto-konceptualnih rešenja u primeni lasera na materijalima predmeta baštine, sa ciljem utvrđivanja eksplikatornih razlika u obrazlaganju potreba za primenu klasičnih pristupa konzervaciji-restauraciji kulturnog nasleđa, sa posebnim osvrtom u domenu tautoloških praksi, Critical re-examinations of the procedures applied on materials during the conservation-restoration of cultural heritage objects, including general and individual questions about the use of new technologies, especially lasers, in relation to classical approaches to the protection of artifacts of archaeological, historical or artistic value. The issue of ethics is viewed from several aspects related to tangible and intangible actions towards objects of protection, in terms of fulfilling the given function of the chosen technique, and under the conditions of the highest degree of safety and environmental protection. This paper focuses on the characterization of proto-conceptual solutions in the application of lasers on heritage materials, with the aim of determining explicative differences in explaining the need for classical approaches to conservation-restoration of cultural heritage, with special reference to tautological practices.",
publisher = "Belgrade : ETRAN Society",
journal = "Proceedings - LXVI ETRAN Conference, 6 ‐ 9, June, 2022, Novi Pazar, Serbia",
title = "Proto-konceptualna rešenja u primeni lasera u heritologiji, Proto-conceptual solutions in the application of lasers in heritology",
pages = "SSHE1.6.1-SSHE1.6.4",
url = "https://hdl.handle.net/21.15107/rcub_cer_5935"
}

Srećković, M., Polić, S. R., Stević, Z., Zarubica, V.,& Ostojić, S.. (2022). Proto-konceptualna rešenja u primeni lasera u heritologiji. in Proceedings - LXVI ETRAN Conference, 6 ‐ 9, June, 2022, Novi Pazar, Serbia
Belgrade : ETRAN Society., SSHE1.6.1-SSHE1.6.4.
https://hdl.handle.net/21.15107/rcub_cer_5935

Srećković M, Polić SR, Stević Z, Zarubica V, Ostojić S. Proto-konceptualna rešenja u primeni lasera u heritologiji. in Proceedings - LXVI ETRAN Conference, 6 ‐ 9, June, 2022, Novi Pazar, Serbia. 2022;:SSHE1.6.1-SSHE1.6.4.
https://hdl.handle.net/21.15107/rcub_cer_5935 .

Srećković, Milesa, Polić, Suzana R., Stević, Zoran, Zarubica, Veljko, Ostojić, Stanko, "Proto-konceptualna rešenja u primeni lasera u heritologiji" in Proceedings - LXVI ETRAN Conference, 6 ‐ 9, June, 2022, Novi Pazar, Serbia (2022):SSHE1.6.1-SSHE1.6.4,
https://hdl.handle.net/21.15107/rcub_cer_5935 .

TY  - CONF
AU  - Polić, Suzana R.
AU  - Petronić, Sanja
AU  - Stević, Zoran
AU  - Jarić, Marko
PY  - 2022
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/5932
AB  - Uporedo sa razvojem istraživanja obnovljivih izvora energije, poslednjih godina razvija se i moderna energetska paradigma u vezi sa različitim aspektima primene ovih izvora, odnosno energetske tranzicije. Filozofski aspekti odnose se na specifičnosti novih perspektiva posmatranja problema i načina rezonovanja u okviru tehnofilozofske tradicije, kao i u kontekstu savremenih okolnosti primene obnovljivih izvora energije. Heritološku dimenziju daje usmerenost na očuvanje civilizacijskih vrednosti i etičko ponašanje. U ovom radu u fokusu su heritološko-filozofske ideje prisutne u savremenoj akademskoj praksi.
AB  - Along with the development of renewable energy research, in recent years, develop and a modern energy paradigm in relation to various aspects of the application of these sources, or energy transition. Philosophical aspects relate to the specifics of new perspectives on observation of problems and ways of resonating within the technophilosophical tradition, as well as in the context of the contemporary circumstances of the using renewable sources of energy. Heritological dimension gives focus on the preservation of civilizational values and ethical behavior. In this paper, the focus is a heritological-philosophical idea present in modern academic practice.
PB  - Savez mašinskih i elektrotehničkih inženjera i tehničara Srbije (SMEITS)
PB  - Društvo za obnovljive izvore električne energije
C3  - Proceedings - 10th International Conference on Renewable Electrical Power Sources
T1  - Heritološko – filozofske ideje u istraživanju primene obnovljivih izvora energije
T1  - Heritological-philosophical Ideas in the Research of the renewable Energy Sources implementatnion
SP  - 165
EP  - 172
UR  - https://hdl.handle.net/21.15107/rcub_cer_5932
ER  - 

@conference{
author = "Polić, Suzana R. and Petronić, Sanja and Stević, Zoran and Jarić, Marko",
year = "2022",
abstract = "Uporedo sa razvojem istraživanja obnovljivih izvora energije, poslednjih godina razvija se i moderna energetska paradigma u vezi sa različitim aspektima primene ovih izvora, odnosno energetske tranzicije. Filozofski aspekti odnose se na specifičnosti novih perspektiva posmatranja problema i načina rezonovanja u okviru tehnofilozofske tradicije, kao i u kontekstu savremenih okolnosti primene obnovljivih izvora energije. Heritološku dimenziju daje usmerenost na očuvanje civilizacijskih vrednosti i etičko ponašanje. U ovom radu u fokusu su heritološko-filozofske ideje prisutne u savremenoj akademskoj praksi., Along with the development of renewable energy research, in recent years, develop and a modern energy paradigm in relation to various aspects of the application of these sources, or energy transition. Philosophical aspects relate to the specifics of new perspectives on observation of problems and ways of resonating within the technophilosophical tradition, as well as in the context of the contemporary circumstances of the using renewable sources of energy. Heritological dimension gives focus on the preservation of civilizational values and ethical behavior. In this paper, the focus is a heritological-philosophical idea present in modern academic practice.",
publisher = "Savez mašinskih i elektrotehničkih inženjera i tehničara Srbije (SMEITS), Društvo za obnovljive izvore električne energije",
journal = "Proceedings - 10th International Conference on Renewable Electrical Power Sources",
title = "Heritološko – filozofske ideje u istraživanju primene obnovljivih izvora energije, Heritological-philosophical Ideas in the Research of the renewable Energy Sources implementatnion",
pages = "165-172",
url = "https://hdl.handle.net/21.15107/rcub_cer_5932"
}

Polić, S. R., Petronić, S., Stević, Z.,& Jarić, M.. (2022). Heritološko – filozofske ideje u istraživanju primene obnovljivih izvora energije. in Proceedings - 10th International Conference on Renewable Electrical Power Sources
Savez mašinskih i elektrotehničkih inženjera i tehničara Srbije (SMEITS)., 165-172.
https://hdl.handle.net/21.15107/rcub_cer_5932

Polić SR, Petronić S, Stević Z, Jarić M. Heritološko – filozofske ideje u istraživanju primene obnovljivih izvora energije. in Proceedings - 10th International Conference on Renewable Electrical Power Sources. 2022;:165-172.
https://hdl.handle.net/21.15107/rcub_cer_5932 .

Polić, Suzana R., Petronić, Sanja, Stević, Zoran, Jarić, Marko, "Heritološko – filozofske ideje u istraživanju primene obnovljivih izvora energije" in Proceedings - 10th International Conference on Renewable Electrical Power Sources (2022):165-172,
https://hdl.handle.net/21.15107/rcub_cer_5932 .

TY  - CONF
AU  - Polić, Suzana R.
AU  - Petronić, Sanja
AU  - Stević, Zoran
AU  - Jarić, Marko
PY  - 2022
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/5931
AB  - Savremena muzejska praksa, koja u procesu muzealizacije obnovljivih izvora energije, u prvi plan ističe ideje, a potom eksponate, pogodna je za muzejsku kontekstualizaciju solarne energije. Imajući u vidu razvoj ideja o korišćenju ove vrste energije, predmet istraživanja je kolekcija Museum of Solar Energy, u kontekstu zaštite kulturnog nasleđa. U okviru razmatranja metodoloških, naučnih i obrazovnih aspekata delatnosti ovog muzeja, uz komparativnu analizu koncepta Frances Young Tang Teaching Museum, daje se projekcija mogućeg razvoja muzeja kao realnog i virtuelnog prostora za sticanje formativnog iskustva u radu sa solarnom energijom.
AB  - Contemporary Museum Practice, which in the process of musealization of renewable energy, emphasizes ideas, and then exhibits, is suitable for museum contextualization of solar energy. Given the development of ideas on using this type of energy, the subject of research is The Collection of Museum of Solar Energy, in the context of protection of cultural heritage. Within the review of the methodological, scientific and educational aspects of this museum, with a comparative analysis of the concept of Frances Young Tang Teaching Museum, we propose the possible development of the museum as a real and virtual space to acquire formative experience in working with solar energy.
PB  - Savez mašinskih i elektrotehničkih inženjera i tehničara Srbije (SMEITS)
PB  - Društvo za obnovljive izvore električne energije
C3  - Proceedings  - 10th International Conference on Renewable Electrical Power Sources, Belgrade
T1  - Savremena muzealizacija i kolekcija Muzeja solarne energije
T1  - Contemporary musealisation and Collection of Museum of Solar Energy
SP  - 69
EP  - 76
UR  - https://hdl.handle.net/21.15107/rcub_cer_5931
ER  - 

@conference{
author = "Polić, Suzana R. and Petronić, Sanja and Stević, Zoran and Jarić, Marko",
year = "2022",
abstract = "Savremena muzejska praksa, koja u procesu muzealizacije obnovljivih izvora energije, u prvi plan ističe ideje, a potom eksponate, pogodna je za muzejsku kontekstualizaciju solarne energije. Imajući u vidu razvoj ideja o korišćenju ove vrste energije, predmet istraživanja je kolekcija Museum of Solar Energy, u kontekstu zaštite kulturnog nasleđa. U okviru razmatranja metodoloških, naučnih i obrazovnih aspekata delatnosti ovog muzeja, uz komparativnu analizu koncepta Frances Young Tang Teaching Museum, daje se projekcija mogućeg razvoja muzeja kao realnog i virtuelnog prostora za sticanje formativnog iskustva u radu sa solarnom energijom., Contemporary Museum Practice, which in the process of musealization of renewable energy, emphasizes ideas, and then exhibits, is suitable for museum contextualization of solar energy. Given the development of ideas on using this type of energy, the subject of research is The Collection of Museum of Solar Energy, in the context of protection of cultural heritage. Within the review of the methodological, scientific and educational aspects of this museum, with a comparative analysis of the concept of Frances Young Tang Teaching Museum, we propose the possible development of the museum as a real and virtual space to acquire formative experience in working with solar energy.",
publisher = "Savez mašinskih i elektrotehničkih inženjera i tehničara Srbije (SMEITS), Društvo za obnovljive izvore električne energije",
journal = "Proceedings  - 10th International Conference on Renewable Electrical Power Sources, Belgrade",
title = "Savremena muzealizacija i kolekcija Muzeja solarne energije, Contemporary musealisation and Collection of Museum of Solar Energy",
pages = "69-76",
url = "https://hdl.handle.net/21.15107/rcub_cer_5931"
}

Polić, S. R., Petronić, S., Stević, Z.,& Jarić, M.. (2022). Savremena muzealizacija i kolekcija Muzeja solarne energije. in Proceedings  - 10th International Conference on Renewable Electrical Power Sources, Belgrade
Savez mašinskih i elektrotehničkih inženjera i tehničara Srbije (SMEITS)., 69-76.
https://hdl.handle.net/21.15107/rcub_cer_5931

Polić SR, Petronić S, Stević Z, Jarić M. Savremena muzealizacija i kolekcija Muzeja solarne energije. in Proceedings  - 10th International Conference on Renewable Electrical Power Sources, Belgrade. 2022;:69-76.
https://hdl.handle.net/21.15107/rcub_cer_5931 .

Polić, Suzana R., Petronić, Sanja, Stević, Zoran, Jarić, Marko, "Savremena muzealizacija i kolekcija Muzeja solarne energije" in Proceedings  - 10th International Conference on Renewable Electrical Power Sources, Belgrade (2022):69-76,
https://hdl.handle.net/21.15107/rcub_cer_5931 .

TY  - CONF
AU  - Stević, Zoran
AU  - Savić, Aleksandar R.
AU  - Vlahović, Milica
AU  - Martinović, Sanja
AU  - Volkov Husović, Tatjana
PY  - 2022
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/6010
AB  - U radu su prikazane osnovne metode ispitivanja materijala, koje mogu poslužiti prilikom prve faze procene kvaliteta materijala, nakon degradacije usled vremena ili drugih faktora koji mogu izmeniti fizičko-mehanička svojstva materijala. Nedestruktivna metoda ispitivanja pomoću praćenja brzine prostiranja ultrazvučnog impulsa upotrebljena je radi ilustracije mogućeg pristupa pri proceni kvaliteta različitih tipova keramičkih materijala za oblaganje.
PB  - ETRAN Society
C3  - Proceedings - IX International Conference on Electrical, Electronic and Computing Engineering (IcETRAN) and LXVI ETRAN Conference, 6 ‐ 9, June, 2022. Novi Pazar, Serbia
T1  - Fizička i nedestruktivna ispitivanja keramičkih materijala za oblaganje sa aspekta trajnosti
SP  - 875
EP  - 877
UR  - https://hdl.handle.net/21.15107/rcub_cer_6010
ER  - 

@conference{
author = "Stević, Zoran and Savić, Aleksandar R. and Vlahović, Milica and Martinović, Sanja and Volkov Husović, Tatjana",
year = "2022",
abstract = "U radu su prikazane osnovne metode ispitivanja materijala, koje mogu poslužiti prilikom prve faze procene kvaliteta materijala, nakon degradacije usled vremena ili drugih faktora koji mogu izmeniti fizičko-mehanička svojstva materijala. Nedestruktivna metoda ispitivanja pomoću praćenja brzine prostiranja ultrazvučnog impulsa upotrebljena je radi ilustracije mogućeg pristupa pri proceni kvaliteta različitih tipova keramičkih materijala za oblaganje.",
publisher = "ETRAN Society",
journal = "Proceedings - IX International Conference on Electrical, Electronic and Computing Engineering (IcETRAN) and LXVI ETRAN Conference, 6 ‐ 9, June, 2022. Novi Pazar, Serbia",
title = "Fizička i nedestruktivna ispitivanja keramičkih materijala za oblaganje sa aspekta trajnosti",
pages = "875-877",
url = "https://hdl.handle.net/21.15107/rcub_cer_6010"
}

Stević, Z., Savić, A. R., Vlahović, M., Martinović, S.,& Volkov Husović, T.. (2022). Fizička i nedestruktivna ispitivanja keramičkih materijala za oblaganje sa aspekta trajnosti. in Proceedings - IX International Conference on Electrical, Electronic and Computing Engineering (IcETRAN) and LXVI ETRAN Conference, 6 ‐ 9, June, 2022. Novi Pazar, Serbia
ETRAN Society., 875-877.
https://hdl.handle.net/21.15107/rcub_cer_6010

Stević Z, Savić AR, Vlahović M, Martinović S, Volkov Husović T. Fizička i nedestruktivna ispitivanja keramičkih materijala za oblaganje sa aspekta trajnosti. in Proceedings - IX International Conference on Electrical, Electronic and Computing Engineering (IcETRAN) and LXVI ETRAN Conference, 6 ‐ 9, June, 2022. Novi Pazar, Serbia. 2022;:875-877.
https://hdl.handle.net/21.15107/rcub_cer_6010 .

Stević, Zoran, Savić, Aleksandar R., Vlahović, Milica, Martinović, Sanja, Volkov Husović, Tatjana, "Fizička i nedestruktivna ispitivanja keramičkih materijala za oblaganje sa aspekta trajnosti" in Proceedings - IX International Conference on Electrical, Electronic and Computing Engineering (IcETRAN) and LXVI ETRAN Conference, 6 ‐ 9, June, 2022. Novi Pazar, Serbia (2022):875-877,
https://hdl.handle.net/21.15107/rcub_cer_6010 .

TY  - CONF
AU  - Polić, Suzana R.
AU  - Stević, Zoran
AU  - Ristić, Slavica
AU  - Radojković, Bojana
PY  - 2021
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/5467
AB  - Феномени лиминалности прате ласерско чишћење историјског папира, од фазе планирања поступка, до завршетка његовог извођењ. Реч је о појавама различитог порекла и начина испољавања, које могу бити доминантне или мање експониране, а свакако једнако значајне за целовитост и квалитет изведеног поступка. У овом раду фокус истраживања је проблематизацији лиминалности, као и артикулација и трансформабилност. Задати референтни оквир представља један од могућих скупова феномена који се у оквиру ласерског чишћења могу сагледавати и у ширим контекстима.
PB  - Београд: Академија техничких струковних студија
C3  - Зборник радова - Шести научно-стручни скуп ПОЛИТЕХНИКА, 10/12/2021, Београд
T1  - Истраживање лиминалних феномена у ласерском чишћењу историјског папира
VL  - 6
SP  - 613
EP  - 618
UR  - https://hdl.handle.net/21.15107/rcub_cer_5467
ER  - 

@conference{
author = "Polić, Suzana R. and Stević, Zoran and Ristić, Slavica and Radojković, Bojana",
year = "2021",
abstract = "Феномени лиминалности прате ласерско чишћење историјског папира, од фазе планирања поступка, до завршетка његовог извођењ. Реч је о појавама различитог порекла и начина испољавања, које могу бити доминантне или мање експониране, а свакако једнако значајне за целовитост и квалитет изведеног поступка. У овом раду фокус истраживања је проблематизацији лиминалности, као и артикулација и трансформабилност. Задати референтни оквир представља један од могућих скупова феномена који се у оквиру ласерског чишћења могу сагледавати и у ширим контекстима.",
publisher = "Београд: Академија техничких струковних студија",
journal = "Зборник радова - Шести научно-стручни скуп ПОЛИТЕХНИКА, 10/12/2021, Београд",
title = "Истраживање лиминалних феномена у ласерском чишћењу историјског папира",
volume = "6",
pages = "613-618",
url = "https://hdl.handle.net/21.15107/rcub_cer_5467"
}

Polić, S. R., Stević, Z., Ristić, S.,& Radojković, B.. (2021). Истраживање лиминалних феномена у ласерском чишћењу историјског папира. in Зборник радова - Шести научно-стручни скуп ПОЛИТЕХНИКА, 10/12/2021, Београд
Београд: Академија техничких струковних студија., 6, 613-618.
https://hdl.handle.net/21.15107/rcub_cer_5467

Polić SR, Stević Z, Ristić S, Radojković B. Истраживање лиминалних феномена у ласерском чишћењу историјског папира. in Зборник радова - Шести научно-стручни скуп ПОЛИТЕХНИКА, 10/12/2021, Београд. 2021;6:613-618.
https://hdl.handle.net/21.15107/rcub_cer_5467 .

Polić, Suzana R., Stević, Zoran, Ristić, Slavica, Radojković, Bojana, "Истраживање лиминалних феномена у ласерском чишћењу историјског папира" in Зборник радова - Шести научно-стручни скуп ПОЛИТЕХНИКА, 10/12/2021, Београд, 6 (2021):613-618,
https://hdl.handle.net/21.15107/rcub_cer_5467 .

TY  - CONF
AU  - Polić, Suzana R.
AU  - Stević, Zoran
AU  - Ristić, Slavica
AU  - Radojković, Bojana
PY  - 2021
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/5466
AB  - Хеуристичке процене дају пресудни допринос у заштити културног наслеђа, због специфичности предмета истраживања, који, по правилу, захтева ограничено узорковање, као и недеструктивно деловање на материјал. За неопходну високу деликатност у интерпретацији експерименталних резултата, хеуристичка процена са својим кумулативним ефектима, који су посебно значајни у верификацији резултата, својеврсни је оператор неинструменталног моделовања процеса ласерског чишћења, којим се у задатој временској ограничености омогућава темпорална екстензија у домену евалуације. У овом раду, у фокусу је научно питање концептуализације хеуристичке процене у ласерском чишћењу папира, која, када се има у виду фрагилност материјала и изразита вулнерабилност, има посебно специфичан значај.
PB  - Београд: Академија техничких струковних студија
C3  - Зборник радова - Шести научно-стручни скуп ПОЛИТЕХНИКА, 10/12/2021, Београд
T1  - Концептуализација хеуристичне процене у ласерском чишћењу папира
VL  - 6
SP  - 607
EP  - 612
UR  - https://hdl.handle.net/21.15107/rcub_cer_5466
ER  - 

@conference{
author = "Polić, Suzana R. and Stević, Zoran and Ristić, Slavica and Radojković, Bojana",
year = "2021",
abstract = "Хеуристичке процене дају пресудни допринос у заштити културног наслеђа, због специфичности предмета истраживања, који, по правилу, захтева ограничено узорковање, као и недеструктивно деловање на материјал. За неопходну високу деликатност у интерпретацији експерименталних резултата, хеуристичка процена са својим кумулативним ефектима, који су посебно значајни у верификацији резултата, својеврсни је оператор неинструменталног моделовања процеса ласерског чишћења, којим се у задатој временској ограничености омогућава темпорална екстензија у домену евалуације. У овом раду, у фокусу је научно питање концептуализације хеуристичке процене у ласерском чишћењу папира, која, када се има у виду фрагилност материјала и изразита вулнерабилност, има посебно специфичан значај.",
publisher = "Београд: Академија техничких струковних студија",
journal = "Зборник радова - Шести научно-стручни скуп ПОЛИТЕХНИКА, 10/12/2021, Београд",
title = "Концептуализација хеуристичне процене у ласерском чишћењу папира",
volume = "6",
pages = "607-612",
url = "https://hdl.handle.net/21.15107/rcub_cer_5466"
}

Polić, S. R., Stević, Z., Ristić, S.,& Radojković, B.. (2021). Концептуализација хеуристичне процене у ласерском чишћењу папира. in Зборник радова - Шести научно-стручни скуп ПОЛИТЕХНИКА, 10/12/2021, Београд
Београд: Академија техничких струковних студија., 6, 607-612.
https://hdl.handle.net/21.15107/rcub_cer_5466

Polić SR, Stević Z, Ristić S, Radojković B. Концептуализација хеуристичне процене у ласерском чишћењу папира. in Зборник радова - Шести научно-стручни скуп ПОЛИТЕХНИКА, 10/12/2021, Београд. 2021;6:607-612.
https://hdl.handle.net/21.15107/rcub_cer_5466 .

Polić, Suzana R., Stević, Zoran, Ristić, Slavica, Radojković, Bojana, "Концептуализација хеуристичне процене у ласерском чишћењу папира" in Зборник радова - Шести научно-стручни скуп ПОЛИТЕХНИКА, 10/12/2021, Београд, 6 (2021):607-612,
https://hdl.handle.net/21.15107/rcub_cer_5466 .

TY  - CONF
AU  - Savić, Aleksandar
AU  - Stević, Zoran
AU  - Martinović, Sanja
AU  - Vlahović, Milica
AU  - Volkov Husović, Tatjana
PY  - 2020
UR  - http://izdanja.smeits.rs/index.php/mkoiee/article/view/6113
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/3788
AB  - Usled hemijske reakcije Portland cementa, koja se uvek javlja u betonu prilikom očvršćavanja, izvesna količina toplote se razvija. Ova toplota mora biti kvantifikovana, obzirom da ona može oštetiti beton ili pomoći mu, zavisno od komponenata betona, elementa konstrukcije, uslova sredine i gradilišta. Postoji veći broj postavki za monitoring toplote hidratacije, od kojih su dve primenjene u slučaju prikazanom u ovom radu. Četiri vrste betona su praćene pomoću pomenute dve tehnike u trajanju od 24 sata. Prva upotrebljena postavka koja je upotrebljena je termovizijska kamera, pomoću koje je praćena površina, a druga je termosenzor – upotrebljena za monitoring unutrašnjosti sveže betonske mase koja je očvršćavala. Potencijal primenjene postavke leži u jednostavnosti montiranja, niskoj ceni i mogućnostima za masovnu upotrebu, što može značajno doprineti monitoringu i preduprediti podbačaj betona.
PB  - Beograd : Savez mašinskih i elektrotehničkih inženjera i tehničara Srbije - SMEITS
C3  - Proceedings - 8th International Conference on Renewable Electrical Power Sources / Zbornik radova - 8. Međunarodna konferencijea o obnovljivim izvorima električne energije
T1  - Thermovision monitoring of concrete heat of hydration
T1  - Termovizijski monitoring toplote vlaženja betona
SP  - 47
EP  - 50
DO  - 10.24094/mkoiee.020.8.1.47
ER  - 

@conference{
author = "Savić, Aleksandar and Stević, Zoran and Martinović, Sanja and Vlahović, Milica and Volkov Husović, Tatjana",
year = "2020",
abstract = "Usled hemijske reakcije Portland cementa, koja se uvek javlja u betonu prilikom očvršćavanja, izvesna količina toplote se razvija. Ova toplota mora biti kvantifikovana, obzirom da ona može oštetiti beton ili pomoći mu, zavisno od komponenata betona, elementa konstrukcije, uslova sredine i gradilišta. Postoji veći broj postavki za monitoring toplote hidratacije, od kojih su dve primenjene u slučaju prikazanom u ovom radu. Četiri vrste betona su praćene pomoću pomenute dve tehnike u trajanju od 24 sata. Prva upotrebljena postavka koja je upotrebljena je termovizijska kamera, pomoću koje je praćena površina, a druga je termosenzor – upotrebljena za monitoring unutrašnjosti sveže betonske mase koja je očvršćavala. Potencijal primenjene postavke leži u jednostavnosti montiranja, niskoj ceni i mogućnostima za masovnu upotrebu, što može značajno doprineti monitoringu i preduprediti podbačaj betona.",
publisher = "Beograd : Savez mašinskih i elektrotehničkih inženjera i tehničara Srbije - SMEITS",
journal = "Proceedings - 8th International Conference on Renewable Electrical Power Sources / Zbornik radova - 8. Međunarodna konferencijea o obnovljivim izvorima električne energije",
title = "Thermovision monitoring of concrete heat of hydration, Termovizijski monitoring toplote vlaženja betona",
pages = "47-50",
doi = "10.24094/mkoiee.020.8.1.47"
}

Savić, A., Stević, Z., Martinović, S., Vlahović, M.,& Volkov Husović, T.. (2020). Thermovision monitoring of concrete heat of hydration. in Proceedings - 8th International Conference on Renewable Electrical Power Sources / Zbornik radova - 8. Međunarodna konferencijea o obnovljivim izvorima električne energije
Beograd : Savez mašinskih i elektrotehničkih inženjera i tehničara Srbije - SMEITS., 47-50.
https://doi.org/10.24094/mkoiee.020.8.1.47

Savić A, Stević Z, Martinović S, Vlahović M, Volkov Husović T. Thermovision monitoring of concrete heat of hydration. in Proceedings - 8th International Conference on Renewable Electrical Power Sources / Zbornik radova - 8. Međunarodna konferencijea o obnovljivim izvorima električne energije. 2020;:47-50.
doi:10.24094/mkoiee.020.8.1.47 .

Savić, Aleksandar, Stević, Zoran, Martinović, Sanja, Vlahović, Milica, Volkov Husović, Tatjana, "Thermovision monitoring of concrete heat of hydration" in Proceedings - 8th International Conference on Renewable Electrical Power Sources / Zbornik radova - 8. Međunarodna konferencijea o obnovljivim izvorima električne energije (2020):47-50,
https://doi.org/10.24094/mkoiee.020.8.1.47 . .

TY  - CONF
AU  - Vlahović, Milica
AU  - Savić, Aleksandar
AU  - Martinović, Sanja
AU  - Đorđević, Nataša G.
AU  - Stević, Zoran
AU  - Volkov Husović, Tatjana
PY  - 2020
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/3790
AB  - Electric power in Serbia is predominantly provided by thermal power plants. All of eleven existing
thermal power plants in Serbia use coal, mainly lignite in the electricity production process
thus generating about 6 million tons of fly ash per year. The estimated amount of fly ash from thermal power plants accumulated in Serbian landfills exceeds 200 million tons. On the other hand, during the last decades, respecting the principles of ecologically sustainable development has been imposed on industries, and one of them is the construction industry. Due to the presence of amorphous SiO2 and Al2O3, fly ash as pozzolanic material is convenient for the production of concrete and mortar. Consequently, multiple positive effects can be expected by the proper consumption of fly ash- reducing landfills and improving concrete properties. The idea of this study is to analyze the possibility of recycling fly ash from a thermal power plant by replacing a part of common mineral filler- limestone in the production of self-compacting concrete (SCC). Properties of conventional SCC with limestone and compositions with different fly ash content were compared. Considering that requirements for SCC should be satisfied and all properties remain or enhance in the case of fly ash addition, this study proved that all designed concretes can be used for structural applications.
AB  - Električnu energiju u Srbiji pretežno obezbeđuju termoelektrane. Svih jedanaest termoelektrana u Srbiji koriste ugalj, uglavnom lignit u procesu proizvodnje električne energije, čime se godišnje generiše oko 6 miliona tona letećeg pepela. Procenjena količina letećeg pepela iz termoelektrana akumulirana na deponijama u Srbiji prelazi 200 miliona tona. S druge strane, poslednjih decenija poštovanje principa ekološki održivog razvoja nametnuto je industrijama, a jedna od njih je i građevinska. Zahvaljujući prisustvu amorfnog SiO2 i Al2O3, pepeo kao pucolanski materijal pogodan je za proizvodnju betona i maltera. Zbog toga se pravilnom upotrebom letećeg pepela mogu očekivati višestruki pozitivni efekti- smanjenje deponija i poboljšanje svojstava betona. Ideja ovog istraživanja je analiziranje mogućnosti recikliranja letećeg pepela iz termoelektrane tako što će delimično zameniti uobičajeni mineralni punioc- krečnjak u proizvodnji samozbijajućeg betona (SCC). Upoređena su svojstva konvencionalnog SCC sa krečnjakom i kompozicija sa različitim sadržajem pepela. S obzirom da je u slučaju dodatka letećeg pepela potrebno da budu zadovoljeni zahtevi za SCC, kao i da svojstva betona ostanu ista ili poboljšana, ova studija je pokazala da se sve dizajnirane smeše mogu koristiti za konstrukcijske primene.
PB  - Beograd : Savez mašinskih i elektrotehničkih inženjera i tehničara Srbije - SMEITS
C3  - Proceedings - 8th International Conference on Renewable Electrical Power Sources / Zbornik radova - 8. Međunarodna konferencijea o obnovljivim izvorima električne energije
T1  - Enhancing properties of concrete by addition of fly ash from a thermal power plant for application in geothermal systems
T1  - Poboljšanje svojstava betona dodatkom letećeg pepela iz termoelektrane za primenu u geotermalnim sistemima
SP  - 77
EP  - 86
DO  - 10.24094/mkoiee.020.8.1.77
ER  - 

@conference{
author = "Vlahović, Milica and Savić, Aleksandar and Martinović, Sanja and Đorđević, Nataša G. and Stević, Zoran and Volkov Husović, Tatjana",
year = "2020",
abstract = "Electric power in Serbia is predominantly provided by thermal power plants. All of eleven existing
thermal power plants in Serbia use coal, mainly lignite in the electricity production process
thus generating about 6 million tons of fly ash per year. The estimated amount of fly ash from thermal power plants accumulated in Serbian landfills exceeds 200 million tons. On the other hand, during the last decades, respecting the principles of ecologically sustainable development has been imposed on industries, and one of them is the construction industry. Due to the presence of amorphous SiO2 and Al2O3, fly ash as pozzolanic material is convenient for the production of concrete and mortar. Consequently, multiple positive effects can be expected by the proper consumption of fly ash- reducing landfills and improving concrete properties. The idea of this study is to analyze the possibility of recycling fly ash from a thermal power plant by replacing a part of common mineral filler- limestone in the production of self-compacting concrete (SCC). Properties of conventional SCC with limestone and compositions with different fly ash content were compared. Considering that requirements for SCC should be satisfied and all properties remain or enhance in the case of fly ash addition, this study proved that all designed concretes can be used for structural applications., Električnu energiju u Srbiji pretežno obezbeđuju termoelektrane. Svih jedanaest termoelektrana u Srbiji koriste ugalj, uglavnom lignit u procesu proizvodnje električne energije, čime se godišnje generiše oko 6 miliona tona letećeg pepela. Procenjena količina letećeg pepela iz termoelektrana akumulirana na deponijama u Srbiji prelazi 200 miliona tona. S druge strane, poslednjih decenija poštovanje principa ekološki održivog razvoja nametnuto je industrijama, a jedna od njih je i građevinska. Zahvaljujući prisustvu amorfnog SiO2 i Al2O3, pepeo kao pucolanski materijal pogodan je za proizvodnju betona i maltera. Zbog toga se pravilnom upotrebom letećeg pepela mogu očekivati višestruki pozitivni efekti- smanjenje deponija i poboljšanje svojstava betona. Ideja ovog istraživanja je analiziranje mogućnosti recikliranja letećeg pepela iz termoelektrane tako što će delimično zameniti uobičajeni mineralni punioc- krečnjak u proizvodnji samozbijajućeg betona (SCC). Upoređena su svojstva konvencionalnog SCC sa krečnjakom i kompozicija sa različitim sadržajem pepela. S obzirom da je u slučaju dodatka letećeg pepela potrebno da budu zadovoljeni zahtevi za SCC, kao i da svojstva betona ostanu ista ili poboljšana, ova studija je pokazala da se sve dizajnirane smeše mogu koristiti za konstrukcijske primene.",
publisher = "Beograd : Savez mašinskih i elektrotehničkih inženjera i tehničara Srbije - SMEITS",
journal = "Proceedings - 8th International Conference on Renewable Electrical Power Sources / Zbornik radova - 8. Međunarodna konferencijea o obnovljivim izvorima električne energije",
title = "Enhancing properties of concrete by addition of fly ash from a thermal power plant for application in geothermal systems, Poboljšanje svojstava betona dodatkom letećeg pepela iz termoelektrane za primenu u geotermalnim sistemima",
pages = "77-86",
doi = "10.24094/mkoiee.020.8.1.77"
}

Vlahović, M., Savić, A., Martinović, S., Đorđević, N. G., Stević, Z.,& Volkov Husović, T.. (2020). Enhancing properties of concrete by addition of fly ash from a thermal power plant for application in geothermal systems. in Proceedings - 8th International Conference on Renewable Electrical Power Sources / Zbornik radova - 8. Međunarodna konferencijea o obnovljivim izvorima električne energije
Beograd : Savez mašinskih i elektrotehničkih inženjera i tehničara Srbije - SMEITS., 77-86.
https://doi.org/10.24094/mkoiee.020.8.1.77

Vlahović M, Savić A, Martinović S, Đorđević NG, Stević Z, Volkov Husović T. Enhancing properties of concrete by addition of fly ash from a thermal power plant for application in geothermal systems. in Proceedings - 8th International Conference on Renewable Electrical Power Sources / Zbornik radova - 8. Međunarodna konferencijea o obnovljivim izvorima električne energije. 2020;:77-86.
doi:10.24094/mkoiee.020.8.1.77 .

Vlahović, Milica, Savić, Aleksandar, Martinović, Sanja, Đorđević, Nataša G., Stević, Zoran, Volkov Husović, Tatjana, "Enhancing properties of concrete by addition of fly ash from a thermal power plant for application in geothermal systems" in Proceedings - 8th International Conference on Renewable Electrical Power Sources / Zbornik radova - 8. Međunarodna konferencijea o obnovljivim izvorima električne energije (2020):77-86,
https://doi.org/10.24094/mkoiee.020.8.1.77 . .

TY  - CONF
AU  - Vlahović, Miljan
AU  - Vlahović, Milica
AU  - Stević, Zoran
PY  - 2020
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/3791
AB  - According to the official definition, approved by the European Geothermal Energy
Council (EGEC), geothermal energy is energy accumulated as heat below the surface of solid soil.
Geothermal energy is thermal energy generated and stored in the Earth. It is generally defined as the part of geothermal heat that can be directly utilized as heat or converted into other types of energy. Geothermal resources vary by location and depth towards the Earth's core. Their use is possible for different purposes depending on their temperature. This paper presents the harnessing geothermal resources for electricity generation. There are three main types of geothermal power plants: dry steam plants, flash steam plants, and binary cycle plants. Dry steam plants pipe hot steam from underground into turbines, which powers the generator to provide electricity. Flash steam plants pump hot water from underground into a cooler flash tank. The formed steam powers the electricity generator. Binary cycle plants pump hot water from underground through a heat exchanger that heats a second liquid to transform it into steam, which powers the generator. In all mentioned systems the used fluids are recycled. It can be concluded that geothermal power plants work similarly to other power plants, but providing the steam for starting the turbine from the earth's interior. The fact that used fluids return to the ground makes geothermal energy resources renewable.
AB  - Prema zvaničnoj definiciji, koju je odobrilo Evropski savet za geotermalnu energiju (European Geothermal Energy Council- EGEC), geotermalna energija je energija akumulirana kao toplota ispod površine čvrstog tla. Geotermalna energija je toplotna energija koja se generiše i skladišti u Zemlji. Generalno se definiše kao deo geotermalne toplote koji se može direktno koristiti kao toplota ili pretvoriti u druge oblike energije. Geotermalni resursi se razlikuju u zavisnosti od lokacije i dubine u odnosu na jezgro Zemlje. Njihova primena moguća je za različite svrhe u zavisnosti od njihove temperature. Ovaj rad prikazuje upotrebu geotermalnih resursa za proizvodnju električne energije. Postoje tri osnovna principa rada geotermalnih elektrana: suva para (dry steam), separisanje pare (flash steam) i binarni (binary cycle). Postrojenja na suvu paru izbacuju vruću paru iz unutrašnjosti Zemlje u turbine, a ona napaja generator koji daje električnu energiju. Postrojenja sa separisanjem pare pumpaju toplu vodu iz iz unutrašnjosti Zemlje u hladniji rezervoar. Nastala para pokreće generator električne energije. Postrojenja sa binarnim ciklusom pumpaju toplu vodu iz unutrašnjosti Zemlje kroz izmjenjivač toplote čime se greje drugi fluid i pretvara u paru koja pokreće generator. U svim pomenutim sistemima korišćeni fluidi se recikliraju. Može se zaključiti da geotermalne elektrane rade slično kao i druge elektrane, ali paru za pokretanje turbine obezbeđuju iz unutrašnjosti Zemlje. Činjenica da se korišćeni fluidi vraćaju u zemlju čini geotermalne izvore energije obnovljivim.
PB  - Beograd : Savez mašinskih i elektrotehničkih inženjera i tehničara Srbije - SMEITS
C3  - Proceedings - 8th International Conference on Renewable Electrical Power Sources / Zbornik radova - 8. Međunarodna konferencijea o obnovljivim izvorima električne energije
T1  - Utilizing renewable resources – converting geothermal energy to electricity
T1  - Korišćenje obnovljivih izvora – pretvaranje geotermalne energije u električnu
SP  - 101
EP  - 110
DO  - 10.24094/mkoiee.020.8.1.101
ER  - 

@conference{
author = "Vlahović, Miljan and Vlahović, Milica and Stević, Zoran",
year = "2020",
abstract = "According to the official definition, approved by the European Geothermal Energy
Council (EGEC), geothermal energy is energy accumulated as heat below the surface of solid soil.
Geothermal energy is thermal energy generated and stored in the Earth. It is generally defined as the part of geothermal heat that can be directly utilized as heat or converted into other types of energy. Geothermal resources vary by location and depth towards the Earth's core. Their use is possible for different purposes depending on their temperature. This paper presents the harnessing geothermal resources for electricity generation. There are three main types of geothermal power plants: dry steam plants, flash steam plants, and binary cycle plants. Dry steam plants pipe hot steam from underground into turbines, which powers the generator to provide electricity. Flash steam plants pump hot water from underground into a cooler flash tank. The formed steam powers the electricity generator. Binary cycle plants pump hot water from underground through a heat exchanger that heats a second liquid to transform it into steam, which powers the generator. In all mentioned systems the used fluids are recycled. It can be concluded that geothermal power plants work similarly to other power plants, but providing the steam for starting the turbine from the earth's interior. The fact that used fluids return to the ground makes geothermal energy resources renewable., Prema zvaničnoj definiciji, koju je odobrilo Evropski savet za geotermalnu energiju (European Geothermal Energy Council- EGEC), geotermalna energija je energija akumulirana kao toplota ispod površine čvrstog tla. Geotermalna energija je toplotna energija koja se generiše i skladišti u Zemlji. Generalno se definiše kao deo geotermalne toplote koji se može direktno koristiti kao toplota ili pretvoriti u druge oblike energije. Geotermalni resursi se razlikuju u zavisnosti od lokacije i dubine u odnosu na jezgro Zemlje. Njihova primena moguća je za različite svrhe u zavisnosti od njihove temperature. Ovaj rad prikazuje upotrebu geotermalnih resursa za proizvodnju električne energije. Postoje tri osnovna principa rada geotermalnih elektrana: suva para (dry steam), separisanje pare (flash steam) i binarni (binary cycle). Postrojenja na suvu paru izbacuju vruću paru iz unutrašnjosti Zemlje u turbine, a ona napaja generator koji daje električnu energiju. Postrojenja sa separisanjem pare pumpaju toplu vodu iz iz unutrašnjosti Zemlje u hladniji rezervoar. Nastala para pokreće generator električne energije. Postrojenja sa binarnim ciklusom pumpaju toplu vodu iz unutrašnjosti Zemlje kroz izmjenjivač toplote čime se greje drugi fluid i pretvara u paru koja pokreće generator. U svim pomenutim sistemima korišćeni fluidi se recikliraju. Može se zaključiti da geotermalne elektrane rade slično kao i druge elektrane, ali paru za pokretanje turbine obezbeđuju iz unutrašnjosti Zemlje. Činjenica da se korišćeni fluidi vraćaju u zemlju čini geotermalne izvore energije obnovljivim.",
publisher = "Beograd : Savez mašinskih i elektrotehničkih inženjera i tehničara Srbije - SMEITS",
journal = "Proceedings - 8th International Conference on Renewable Electrical Power Sources / Zbornik radova - 8. Međunarodna konferencijea o obnovljivim izvorima električne energije",
title = "Utilizing renewable resources – converting geothermal energy to electricity, Korišćenje obnovljivih izvora – pretvaranje geotermalne energije u električnu",
pages = "101-110",
doi = "10.24094/mkoiee.020.8.1.101"
}

Vlahović, M., Vlahović, M.,& Stević, Z.. (2020). Utilizing renewable resources – converting geothermal energy to electricity. in Proceedings - 8th International Conference on Renewable Electrical Power Sources / Zbornik radova - 8. Međunarodna konferencijea o obnovljivim izvorima električne energije
Beograd : Savez mašinskih i elektrotehničkih inženjera i tehničara Srbije - SMEITS., 101-110.
https://doi.org/10.24094/mkoiee.020.8.1.101

Vlahović M, Vlahović M, Stević Z. Utilizing renewable resources – converting geothermal energy to electricity. in Proceedings - 8th International Conference on Renewable Electrical Power Sources / Zbornik radova - 8. Međunarodna konferencijea o obnovljivim izvorima električne energije. 2020;:101-110.
doi:10.24094/mkoiee.020.8.1.101 .

Vlahović, Miljan, Vlahović, Milica, Stević, Zoran, "Utilizing renewable resources – converting geothermal energy to electricity" in Proceedings - 8th International Conference on Renewable Electrical Power Sources / Zbornik radova - 8. Međunarodna konferencijea o obnovljivim izvorima električne energije (2020):101-110,
https://doi.org/10.24094/mkoiee.020.8.1.101 . .

TY  - CONF
AU  - Vlahović, Milica
AU  - Martinović, Sanja
AU  - Stević, Zoran
AU  - Savić, Aleksandar R.
AU  - Volkov Husović, Tatjana
PY  - 2019
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/5948
AB  - Establishing a wind park presents a complex enterprise, which involves numerous activities, often impossible to synchronize and drive into the appropriate time-frame. Therefore, in some cases, based on reasonable suspicion, a concern rises regarding the quality of already built components of structures. In such cases, the launch of suitable assessment procedures is required. Stand-ards then define proper methods of in-situ assessment of concrete quality. Statistical methods are implemented in the analysis of the concrete components following the strict rules which, if executed correctly by the well-trained personnel of accredited institutions, provide exact and valid insight in the situation. This paper aspires to describe such procedure on the basis of thorough in-situ investigation and subsequent analysis. In this study, a large number of 255 core samples were taken from 17 wind tower concrete structure elements – foundations (out of 57 wind towers in total), and the compressive strength of already placed concrete was evaluated based on this set of results. The compressive strength is proved to be a good parameter for evaluating other aspects of concrete quality, mechanical properties, and durability.
PB  - Beograd : Savez mašinskih i elektrotehničkih inženjera i tehničara Srbije - SMEITS
PB  - Beograd : Društvo za obnovljive izvore električne energije
C3  - Proceedings - 7th International Conference on Renewable Electrical Power Sources-MKOIEE, October 17–18, 2019, Belgrade, Serbia
T1  - Examining erosion resistance of ceramics for electrical engineering applications
SP  - 25
EP  - 30
UR  - https://hdl.handle.net/21.15107/rcub_cer_5948
ER  - 

@conference{
author = "Vlahović, Milica and Martinović, Sanja and Stević, Zoran and Savić, Aleksandar R. and Volkov Husović, Tatjana",
year = "2019",
abstract = "Establishing a wind park presents a complex enterprise, which involves numerous activities, often impossible to synchronize and drive into the appropriate time-frame. Therefore, in some cases, based on reasonable suspicion, a concern rises regarding the quality of already built components of structures. In such cases, the launch of suitable assessment procedures is required. Stand-ards then define proper methods of in-situ assessment of concrete quality. Statistical methods are implemented in the analysis of the concrete components following the strict rules which, if executed correctly by the well-trained personnel of accredited institutions, provide exact and valid insight in the situation. This paper aspires to describe such procedure on the basis of thorough in-situ investigation and subsequent analysis. In this study, a large number of 255 core samples were taken from 17 wind tower concrete structure elements – foundations (out of 57 wind towers in total), and the compressive strength of already placed concrete was evaluated based on this set of results. The compressive strength is proved to be a good parameter for evaluating other aspects of concrete quality, mechanical properties, and durability.",
publisher = "Beograd : Savez mašinskih i elektrotehničkih inženjera i tehničara Srbije - SMEITS, Beograd : Društvo za obnovljive izvore električne energije",
journal = "Proceedings - 7th International Conference on Renewable Electrical Power Sources-MKOIEE, October 17–18, 2019, Belgrade, Serbia",
title = "Examining erosion resistance of ceramics for electrical engineering applications",
pages = "25-30",
url = "https://hdl.handle.net/21.15107/rcub_cer_5948"
}

Vlahović, M., Martinović, S., Stević, Z., Savić, A. R.,& Volkov Husović, T.. (2019). Examining erosion resistance of ceramics for electrical engineering applications. in Proceedings - 7th International Conference on Renewable Electrical Power Sources-MKOIEE, October 17–18, 2019, Belgrade, Serbia
Beograd : Savez mašinskih i elektrotehničkih inženjera i tehničara Srbije - SMEITS., 25-30.
https://hdl.handle.net/21.15107/rcub_cer_5948

Vlahović M, Martinović S, Stević Z, Savić AR, Volkov Husović T. Examining erosion resistance of ceramics for electrical engineering applications. in Proceedings - 7th International Conference on Renewable Electrical Power Sources-MKOIEE, October 17–18, 2019, Belgrade, Serbia. 2019;:25-30.
https://hdl.handle.net/21.15107/rcub_cer_5948 .

Vlahović, Milica, Martinović, Sanja, Stević, Zoran, Savić, Aleksandar R., Volkov Husović, Tatjana, "Examining erosion resistance of ceramics for electrical engineering applications" in Proceedings - 7th International Conference on Renewable Electrical Power Sources-MKOIEE, October 17–18, 2019, Belgrade, Serbia (2019):25-30,
https://hdl.handle.net/21.15107/rcub_cer_5948 .

TY  - CONF
AU  - Savić, Aleksandar R.
AU  - Stević, Zoran
AU  - Martinović, Sanja
AU  - Vlahović, Milica
AU  - Volkov Husović, Tatjana
PY  - 2019
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/5947
AB  - In this research, two non-destructive testing (NDT) methods, thermal vision analysis and image analysis, were implemented for monitoring the surface changes- erosion of mullite-based ceramic samples in conditions of cavitation exposure. Thermal imaging analysis was focused on determining the temperature line profile at the end of the cavitation experiment. Image analysis is a powerful tool for the quantification of degradation level caused by different impacts and conditions. Based on the results of the image analysis, the degradation level during the testing was determined, as well as number of formed pits with their characteristics (average diameter and area). The results performed by both methods were discussed in order to obtain the optimal procedure that should be followed for estimating degradation caused by cavitation erosion.
PB  - Beograd : Savez mašinskih i elektrotehničkih inženjera i tehničara Srbije - SMEITS
PB  - Beograd : Društvo za obnovljive izvore električne energije
C3  - Proceedings - 7th International Conference on Renewable Electrical Power Sources-MKOIEE, October 17–18, 2019, Belgrade, Serbia
T1  - Quantitative and qualitative analysis of concrete elements in wind park
SP  - 15
EP  - 24
UR  - https://hdl.handle.net/21.15107/rcub_cer_5947
ER  - 

@conference{
author = "Savić, Aleksandar R. and Stević, Zoran and Martinović, Sanja and Vlahović, Milica and Volkov Husović, Tatjana",
year = "2019",
abstract = "In this research, two non-destructive testing (NDT) methods, thermal vision analysis and image analysis, were implemented for monitoring the surface changes- erosion of mullite-based ceramic samples in conditions of cavitation exposure. Thermal imaging analysis was focused on determining the temperature line profile at the end of the cavitation experiment. Image analysis is a powerful tool for the quantification of degradation level caused by different impacts and conditions. Based on the results of the image analysis, the degradation level during the testing was determined, as well as number of formed pits with their characteristics (average diameter and area). The results performed by both methods were discussed in order to obtain the optimal procedure that should be followed for estimating degradation caused by cavitation erosion.",
publisher = "Beograd : Savez mašinskih i elektrotehničkih inženjera i tehničara Srbije - SMEITS, Beograd : Društvo za obnovljive izvore električne energije",
journal = "Proceedings - 7th International Conference on Renewable Electrical Power Sources-MKOIEE, October 17–18, 2019, Belgrade, Serbia",
title = "Quantitative and qualitative analysis of concrete elements in wind park",
pages = "15-24",
url = "https://hdl.handle.net/21.15107/rcub_cer_5947"
}

Savić, A. R., Stević, Z., Martinović, S., Vlahović, M.,& Volkov Husović, T.. (2019). Quantitative and qualitative analysis of concrete elements in wind park. in Proceedings - 7th International Conference on Renewable Electrical Power Sources-MKOIEE, October 17–18, 2019, Belgrade, Serbia
Beograd : Savez mašinskih i elektrotehničkih inženjera i tehničara Srbije - SMEITS., 15-24.
https://hdl.handle.net/21.15107/rcub_cer_5947

Savić AR, Stević Z, Martinović S, Vlahović M, Volkov Husović T. Quantitative and qualitative analysis of concrete elements in wind park. in Proceedings - 7th International Conference on Renewable Electrical Power Sources-MKOIEE, October 17–18, 2019, Belgrade, Serbia. 2019;:15-24.
https://hdl.handle.net/21.15107/rcub_cer_5947 .

Savić, Aleksandar R., Stević, Zoran, Martinović, Sanja, Vlahović, Milica, Volkov Husović, Tatjana, "Quantitative and qualitative analysis of concrete elements in wind park" in Proceedings - 7th International Conference on Renewable Electrical Power Sources-MKOIEE, October 17–18, 2019, Belgrade, Serbia (2019):15-24,
https://hdl.handle.net/21.15107/rcub_cer_5947 .

TY  - CONF
AU  - Volkov Husović, Tatjana
AU  - Martinović, Sanja
AU  - Vlahović, Milica
AU  - Savić, Aleksandar R.
AU  - Stević, Zoran
PY  - 2018
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/5951
AB  - The quantities of component materials used for production of concrete are high on the
global scale, therefore alternative materials are experimented on, in order to replace the
natural ones. The possibility of using ground waste sulfur from the oil refining (petroleum)
industry as a filling component of self-compacting concrete is presented in the paper, based
on common concrete laboratory tests. The physical and mechanical properties of selfcompacting
concrete decrease to some extend due to use of ground sulfur, but this concrete
remains useful for some building applications.
PB  - Association for Promotion of Holistic Approach to Environment
C3  - Proceedings book - 1st International Conference “The Holistic Approach to Environment”, 13-14 September, 2018, Sisak, Croatia
T1  - Possible use of ground sulfur as petroleum industry byproduct in self-compacting concrete production
SP  - 784
EP  - 791
UR  - https://hdl.handle.net/21.15107/rcub_cer_5951
ER  - 

@conference{
author = "Volkov Husović, Tatjana and Martinović, Sanja and Vlahović, Milica and Savić, Aleksandar R. and Stević, Zoran",
year = "2018",
abstract = "The quantities of component materials used for production of concrete are high on the
global scale, therefore alternative materials are experimented on, in order to replace the
natural ones. The possibility of using ground waste sulfur from the oil refining (petroleum)
industry as a filling component of self-compacting concrete is presented in the paper, based
on common concrete laboratory tests. The physical and mechanical properties of selfcompacting
concrete decrease to some extend due to use of ground sulfur, but this concrete
remains useful for some building applications.",
publisher = "Association for Promotion of Holistic Approach to Environment",
journal = "Proceedings book - 1st International Conference “The Holistic Approach to Environment”, 13-14 September, 2018, Sisak, Croatia",
title = "Possible use of ground sulfur as petroleum industry byproduct in self-compacting concrete production",
pages = "784-791",
url = "https://hdl.handle.net/21.15107/rcub_cer_5951"
}

Volkov Husović, T., Martinović, S., Vlahović, M., Savić, A. R.,& Stević, Z.. (2018). Possible use of ground sulfur as petroleum industry byproduct in self-compacting concrete production. in Proceedings book - 1st International Conference “The Holistic Approach to Environment”, 13-14 September, 2018, Sisak, Croatia
Association for Promotion of Holistic Approach to Environment., 784-791.
https://hdl.handle.net/21.15107/rcub_cer_5951

Volkov Husović T, Martinović S, Vlahović M, Savić AR, Stević Z. Possible use of ground sulfur as petroleum industry byproduct in self-compacting concrete production. in Proceedings book - 1st International Conference “The Holistic Approach to Environment”, 13-14 September, 2018, Sisak, Croatia. 2018;:784-791.
https://hdl.handle.net/21.15107/rcub_cer_5951 .

Volkov Husović, Tatjana, Martinović, Sanja, Vlahović, Milica, Savić, Aleksandar R., Stević, Zoran, "Possible use of ground sulfur as petroleum industry byproduct in self-compacting concrete production" in Proceedings book - 1st International Conference “The Holistic Approach to Environment”, 13-14 September, 2018, Sisak, Croatia (2018):784-791,
https://hdl.handle.net/21.15107/rcub_cer_5951 .

TY  - CONF
AU  - Vlahović, Milica
AU  - Martinović, Sanja
AU  - Savić, Aleksandar R.
AU  - Stević, Zoran
AU  - Volkov Husović, Tatjana
PY  - 2018
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/5952
AB  - Mainly due to the strict global environmental regulations regarding the oil and gas
refining processes, which limit the maximum quantity of sulfur in combustibles, the
availability of waste sulfur has been considerably growing during the last decades and it is
evident that there will be a continuous abundant supply of waste sulfur in the future. Finding
new ways for waste sulfur consumption thus becomes very important. In this research,
possibility of using waste sulfur as a binding agent in concrete was analyzed and the
properties of the obtained sulfur polymer concrete in aggressive environments were examined
using destructive and non-destructive testing methods. Compressive strength changes were
insignificant. Ultrasonic measurements indicated significant homogeneity changes and slight
internal degradation. Based on the obtained results, the material with satisfying quality for
possible application in corrosive environment was produced.
PB  - Association for Promotion of Holistic Approach to Environment
C3  - Proceedings book - 1st International Conference “The Holistic Approach to Environment”, 13-14 September, 2018, Sisak, Croatia
T1  - Reuse of waste sulfur as a binding agent in concrete
SP  - 776
EP  - 783
UR  - https://hdl.handle.net/21.15107/rcub_cer_5952
ER  - 

@conference{
author = "Vlahović, Milica and Martinović, Sanja and Savić, Aleksandar R. and Stević, Zoran and Volkov Husović, Tatjana",
year = "2018",
abstract = "Mainly due to the strict global environmental regulations regarding the oil and gas
refining processes, which limit the maximum quantity of sulfur in combustibles, the
availability of waste sulfur has been considerably growing during the last decades and it is
evident that there will be a continuous abundant supply of waste sulfur in the future. Finding
new ways for waste sulfur consumption thus becomes very important. In this research,
possibility of using waste sulfur as a binding agent in concrete was analyzed and the
properties of the obtained sulfur polymer concrete in aggressive environments were examined
using destructive and non-destructive testing methods. Compressive strength changes were
insignificant. Ultrasonic measurements indicated significant homogeneity changes and slight
internal degradation. Based on the obtained results, the material with satisfying quality for
possible application in corrosive environment was produced.",
publisher = "Association for Promotion of Holistic Approach to Environment",
journal = "Proceedings book - 1st International Conference “The Holistic Approach to Environment”, 13-14 September, 2018, Sisak, Croatia",
title = "Reuse of waste sulfur as a binding agent in concrete",
pages = "776-783",
url = "https://hdl.handle.net/21.15107/rcub_cer_5952"
}

Vlahović, M., Martinović, S., Savić, A. R., Stević, Z.,& Volkov Husović, T.. (2018). Reuse of waste sulfur as a binding agent in concrete. in Proceedings book - 1st International Conference “The Holistic Approach to Environment”, 13-14 September, 2018, Sisak, Croatia
Association for Promotion of Holistic Approach to Environment., 776-783.
https://hdl.handle.net/21.15107/rcub_cer_5952

Vlahović M, Martinović S, Savić AR, Stević Z, Volkov Husović T. Reuse of waste sulfur as a binding agent in concrete. in Proceedings book - 1st International Conference “The Holistic Approach to Environment”, 13-14 September, 2018, Sisak, Croatia. 2018;:776-783.
https://hdl.handle.net/21.15107/rcub_cer_5952 .

Vlahović, Milica, Martinović, Sanja, Savić, Aleksandar R., Stević, Zoran, Volkov Husović, Tatjana, "Reuse of waste sulfur as a binding agent in concrete" in Proceedings book - 1st International Conference “The Holistic Approach to Environment”, 13-14 September, 2018, Sisak, Croatia (2018):776-783,
https://hdl.handle.net/21.15107/rcub_cer_5952 .

TY  - CONF
AU  - Savić, Aleksandar R.
AU  - Martinović, Sanja
AU  - Vlahović, Milica
AU  - Stević, Zoran
AU  - Volkov Husović, Tatjana
PY  - 2018
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/5965
AB  - Self-compacting concrete (SCC) typically contains a certain content of very fine mineral fillers such as limestone powder. The idea of this study was to partially replace limestone with elemental waste sulfur since it is hydrophobic, insoluble in water and therefore chemically inert in concrete mixtures. Properties of conventional SCC with limestone and several compositions with different sulfur content were compared. Hardened concrete was tested for compressive, flexural, and adhesion strengths, dynamic elasticity modulus, specific electrical resistance, density, microstructure, and infra-red thermography. Results showed a slight decline in compressive, flexural, and adhesion strengths as well as in dynamic elasticity modulus. Specific electrical resistance and density were higher for samples with sulfur. SEM analysis indicated a slight porosity increase for the sample with sulfur. Infrared thermography was applied as a fast method for detecting internal deformations. Having in mind that all properties should remain or improve in case of waste valorization and the criteria should be set to satisfy requirements for SCC, this study proved that all mixtures can be used for certain structural applications.
PB  - Union of Mechanical and Electrical Engineers and Technicains of Serbia
PB  - Society for Renewable Electrical Power Sources
C3  - Proceedings - 6th International Conference on Renewable Electrical Power Sources-MKOIEE, October 11-12, 2018, Belgrade, Serbia
T1  - Valorization of waste sulfur in synthesis of eco-friendly self-compacting concrete
SP  - 221
EP  - 228
UR  - https://hdl.handle.net/21.15107/rcub_cer_5965
ER  - 

@conference{
author = "Savić, Aleksandar R. and Martinović, Sanja and Vlahović, Milica and Stević, Zoran and Volkov Husović, Tatjana",
year = "2018",
abstract = "Self-compacting concrete (SCC) typically contains a certain content of very fine mineral fillers such as limestone powder. The idea of this study was to partially replace limestone with elemental waste sulfur since it is hydrophobic, insoluble in water and therefore chemically inert in concrete mixtures. Properties of conventional SCC with limestone and several compositions with different sulfur content were compared. Hardened concrete was tested for compressive, flexural, and adhesion strengths, dynamic elasticity modulus, specific electrical resistance, density, microstructure, and infra-red thermography. Results showed a slight decline in compressive, flexural, and adhesion strengths as well as in dynamic elasticity modulus. Specific electrical resistance and density were higher for samples with sulfur. SEM analysis indicated a slight porosity increase for the sample with sulfur. Infrared thermography was applied as a fast method for detecting internal deformations. Having in mind that all properties should remain or improve in case of waste valorization and the criteria should be set to satisfy requirements for SCC, this study proved that all mixtures can be used for certain structural applications.",
publisher = "Union of Mechanical and Electrical Engineers and Technicains of Serbia, Society for Renewable Electrical Power Sources",
journal = "Proceedings - 6th International Conference on Renewable Electrical Power Sources-MKOIEE, October 11-12, 2018, Belgrade, Serbia",
title = "Valorization of waste sulfur in synthesis of eco-friendly self-compacting concrete",
pages = "221-228",
url = "https://hdl.handle.net/21.15107/rcub_cer_5965"
}

Savić, A. R., Martinović, S., Vlahović, M., Stević, Z.,& Volkov Husović, T.. (2018). Valorization of waste sulfur in synthesis of eco-friendly self-compacting concrete. in Proceedings - 6th International Conference on Renewable Electrical Power Sources-MKOIEE, October 11-12, 2018, Belgrade, Serbia
Union of Mechanical and Electrical Engineers and Technicains of Serbia., 221-228.
https://hdl.handle.net/21.15107/rcub_cer_5965

Savić AR, Martinović S, Vlahović M, Stević Z, Volkov Husović T. Valorization of waste sulfur in synthesis of eco-friendly self-compacting concrete. in Proceedings - 6th International Conference on Renewable Electrical Power Sources-MKOIEE, October 11-12, 2018, Belgrade, Serbia. 2018;:221-228.
https://hdl.handle.net/21.15107/rcub_cer_5965 .

Savić, Aleksandar R., Martinović, Sanja, Vlahović, Milica, Stević, Zoran, Volkov Husović, Tatjana, "Valorization of waste sulfur in synthesis of eco-friendly self-compacting concrete" in Proceedings - 6th International Conference on Renewable Electrical Power Sources-MKOIEE, October 11-12, 2018, Belgrade, Serbia (2018):221-228,
https://hdl.handle.net/21.15107/rcub_cer_5965 .

TY  - CONF
AU  - Stević, Zoran
AU  - Rajčić-Vujasinović, Mirjana
AU  - Savić, Aleksandar R.
AU  - Martinović, Sanja
AU  - Vlahović, Milica
AU  - Radovanović, Ilija
AU  - Volkov Husović, Tatjana
PY  - 2018
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/6013
AB  - U ovom radu su praćeni efekti toplote hidratacije različitih betona upotrebom termovizijske kamere i termodavača priključenih na osmokanalni sistem za monitoring temperature na bazi PC i LabVIEW paketa, razvijen za potrebe ovog istraživanja. Temperatura ambijenta (laboratorije) beležena je i memorisana pomoću posebnog digitalnog instrumenta. Praćenje temperature svežeg betona je trajalo 24h. Vršena su poređenja temperatura površine izmerenih termodavačima i
termovizijskom kamerom. Na osnovu toga uspostavljene su korelaciju koje bi mogle dovesti do pojednostavljenja daljih ispitivanja, posebno masovnih.
PB  - University of East Sarajevo, Faculty of Electrical Engineering
C3  - Proceedings - XVII international symposium INFOTEH-JAHORINA (INFOTEH) , March 21-23, 2018, Jahorina, East Sarajevo, Republic of Srpska, Bosnia and Herzegovina
T1  - Monitoring efekata toplote hidratacije betona
VL  - 17
SP  - 255
SP  - 258
UR  - https://hdl.handle.net/21.15107/rcub_cer_6013
ER  - 

@conference{
author = "Stević, Zoran and Rajčić-Vujasinović, Mirjana and Savić, Aleksandar R. and Martinović, Sanja and Vlahović, Milica and Radovanović, Ilija and Volkov Husović, Tatjana",
year = "2018",
abstract = "U ovom radu su praćeni efekti toplote hidratacije različitih betona upotrebom termovizijske kamere i termodavača priključenih na osmokanalni sistem za monitoring temperature na bazi PC i LabVIEW paketa, razvijen za potrebe ovog istraživanja. Temperatura ambijenta (laboratorije) beležena je i memorisana pomoću posebnog digitalnog instrumenta. Praćenje temperature svežeg betona je trajalo 24h. Vršena su poređenja temperatura površine izmerenih termodavačima i
termovizijskom kamerom. Na osnovu toga uspostavljene su korelaciju koje bi mogle dovesti do pojednostavljenja daljih ispitivanja, posebno masovnih.",
publisher = "University of East Sarajevo, Faculty of Electrical Engineering",
journal = "Proceedings - XVII international symposium INFOTEH-JAHORINA (INFOTEH) , March 21-23, 2018, Jahorina, East Sarajevo, Republic of Srpska, Bosnia and Herzegovina",
title = "Monitoring efekata toplote hidratacije betona",
volume = "17",
pages = "255-258",
url = "https://hdl.handle.net/21.15107/rcub_cer_6013"
}

Stević, Z., Rajčić-Vujasinović, M., Savić, A. R., Martinović, S., Vlahović, M., Radovanović, I.,& Volkov Husović, T.. (2018). Monitoring efekata toplote hidratacije betona. in Proceedings - XVII international symposium INFOTEH-JAHORINA (INFOTEH) , March 21-23, 2018, Jahorina, East Sarajevo, Republic of Srpska, Bosnia and Herzegovina
University of East Sarajevo, Faculty of Electrical Engineering., 17, 255.
https://hdl.handle.net/21.15107/rcub_cer_6013

Stević Z, Rajčić-Vujasinović M, Savić AR, Martinović S, Vlahović M, Radovanović I, Volkov Husović T. Monitoring efekata toplote hidratacije betona. in Proceedings - XVII international symposium INFOTEH-JAHORINA (INFOTEH) , March 21-23, 2018, Jahorina, East Sarajevo, Republic of Srpska, Bosnia and Herzegovina. 2018;17:255.
https://hdl.handle.net/21.15107/rcub_cer_6013 .

Stević, Zoran, Rajčić-Vujasinović, Mirjana, Savić, Aleksandar R., Martinović, Sanja, Vlahović, Milica, Radovanović, Ilija, Volkov Husović, Tatjana, "Monitoring efekata toplote hidratacije betona" in Proceedings - XVII international symposium INFOTEH-JAHORINA (INFOTEH) , March 21-23, 2018, Jahorina, East Sarajevo, Republic of Srpska, Bosnia and Herzegovina, 17 (2018):255,
https://hdl.handle.net/21.15107/rcub_cer_6013 .

TY  - JOUR
AU  - Stević, Zoran
AU  - Vlahović, Milica
AU  - Martinović, Sanja
AU  - Dimitrijević, Stevan
AU  - Ponomaryova, Elena
AU  - Volkov-Husović, Tatjana
PY  - 2018
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/2409
AB  - Pulse-reverse power modes are used in galvanotechniques in order to obtain coatings with better characteristics in terms of gloss, adhesion, tracking sharp edges and uniform distribution of deposits on complex shape objects, compared with the coatings produced by constant current modes. Pulse-reverse modes also allow the use of a higher current density, and thus the production speed of electroplating cells increases. Systems for standard electroplating of copper, silver and gold are optimised by the suitable choice of duration and intensity of the pulses. It is shown that coatings with satisfactory quality can be deposited using higher current density, different modes of pulsed current in a very short period of time, without expensive and often dangerous additives in the electrolyte. Parameters of the model for certain electrochemical systems were determined by modelling and computer simulation, so the system behaviour under different circumstances becomes predictive.
PB  - De Gruyter
T2  - International Journal of Materials Research
T1  - Modelling, simulation and optimisation of pulse-reverse regime of copper, silver and gold electrodeposition
VL  - 109
IS  - 6
SP  - 514
EP  - 521
DO  - 10.3139/146.111636
ER  - 

@article{
author = "Stević, Zoran and Vlahović, Milica and Martinović, Sanja and Dimitrijević, Stevan and Ponomaryova, Elena and Volkov-Husović, Tatjana",
year = "2018",
abstract = "Pulse-reverse power modes are used in galvanotechniques in order to obtain coatings with better characteristics in terms of gloss, adhesion, tracking sharp edges and uniform distribution of deposits on complex shape objects, compared with the coatings produced by constant current modes. Pulse-reverse modes also allow the use of a higher current density, and thus the production speed of electroplating cells increases. Systems for standard electroplating of copper, silver and gold are optimised by the suitable choice of duration and intensity of the pulses. It is shown that coatings with satisfactory quality can be deposited using higher current density, different modes of pulsed current in a very short period of time, without expensive and often dangerous additives in the electrolyte. Parameters of the model for certain electrochemical systems were determined by modelling and computer simulation, so the system behaviour under different circumstances becomes predictive.",
publisher = "De Gruyter",
journal = "International Journal of Materials Research",
title = "Modelling, simulation and optimisation of pulse-reverse regime of copper, silver and gold electrodeposition",
volume = "109",
number = "6",
pages = "514-521",
doi = "10.3139/146.111636"
}

Stević, Z., Vlahović, M., Martinović, S., Dimitrijević, S., Ponomaryova, E.,& Volkov-Husović, T.. (2018). Modelling, simulation and optimisation of pulse-reverse regime of copper, silver and gold electrodeposition. in International Journal of Materials Research
De Gruyter., 109(6), 514-521.
https://doi.org/10.3139/146.111636

Stević Z, Vlahović M, Martinović S, Dimitrijević S, Ponomaryova E, Volkov-Husović T. Modelling, simulation and optimisation of pulse-reverse regime of copper, silver and gold electrodeposition. in International Journal of Materials Research. 2018;109(6):514-521.
doi:10.3139/146.111636 .

Stević, Zoran, Vlahović, Milica, Martinović, Sanja, Dimitrijević, Stevan, Ponomaryova, Elena, Volkov-Husović, Tatjana, "Modelling, simulation and optimisation of pulse-reverse regime of copper, silver and gold electrodeposition" in International Journal of Materials Research, 109, no. 6 (2018):514-521,
https://doi.org/10.3139/146.111636 . .

TY  - CONF
AU  - Pavlović, Marko
AU  - Martinović, Sanja
AU  - Dojčinović, Marina
AU  - Vlahović, Milica
AU  - Stević, Zoran
AU  - Volkov Husović, Tatjana
PY  - 2017
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/7259
AB  - This study is focused on monitoring the degradation level of zircon based ceramic materials during exposure to cavitation. In addition to conventional degradation monitoring methods, weight loss measuring, the emphasis is on monitoring the changes occurring at the surface of the sample by taking the photos and analyzing of these images. In this paper, several parameters are monitored by image analysis: the level of surface degradation, the number of pits, and the average area of the pits. This method proved to be very fast and useful for a quantification of damage which could improve the prediction of the material lifetime.
PB  - Bor : University of Belgrade - Technical Faculty in Bor
C3  - Proceedings - 49th International October Conference on Mining and Metallurgy-IOC-2017, October 18-21 2017, Bor Lake, Serbia
T1  - Damage level evaluation of zircon samples caused by cavitation erosion using image analysis
SP  - 594
EP  - 597
UR  - https://hdl.handle.net/21.15107/rcub_cer_7259
ER  - 

@conference{
author = "Pavlović, Marko and Martinović, Sanja and Dojčinović, Marina and Vlahović, Milica and Stević, Zoran and Volkov Husović, Tatjana",
year = "2017",
abstract = "This study is focused on monitoring the degradation level of zircon based ceramic materials during exposure to cavitation. In addition to conventional degradation monitoring methods, weight loss measuring, the emphasis is on monitoring the changes occurring at the surface of the sample by taking the photos and analyzing of these images. In this paper, several parameters are monitored by image analysis: the level of surface degradation, the number of pits, and the average area of the pits. This method proved to be very fast and useful for a quantification of damage which could improve the prediction of the material lifetime.",
publisher = "Bor : University of Belgrade - Technical Faculty in Bor",
journal = "Proceedings - 49th International October Conference on Mining and Metallurgy-IOC-2017, October 18-21 2017, Bor Lake, Serbia",
title = "Damage level evaluation of zircon samples caused by cavitation erosion using image analysis",
pages = "594-597",
url = "https://hdl.handle.net/21.15107/rcub_cer_7259"
}

Pavlović, M., Martinović, S., Dojčinović, M., Vlahović, M., Stević, Z.,& Volkov Husović, T.. (2017). Damage level evaluation of zircon samples caused by cavitation erosion using image analysis. in Proceedings - 49th International October Conference on Mining and Metallurgy-IOC-2017, October 18-21 2017, Bor Lake, Serbia
Bor : University of Belgrade - Technical Faculty in Bor., 594-597.
https://hdl.handle.net/21.15107/rcub_cer_7259

Pavlović M, Martinović S, Dojčinović M, Vlahović M, Stević Z, Volkov Husović T. Damage level evaluation of zircon samples caused by cavitation erosion using image analysis. in Proceedings - 49th International October Conference on Mining and Metallurgy-IOC-2017, October 18-21 2017, Bor Lake, Serbia. 2017;:594-597.
https://hdl.handle.net/21.15107/rcub_cer_7259 .

Pavlović, Marko, Martinović, Sanja, Dojčinović, Marina, Vlahović, Milica, Stević, Zoran, Volkov Husović, Tatjana, "Damage level evaluation of zircon samples caused by cavitation erosion using image analysis" in Proceedings - 49th International October Conference on Mining and Metallurgy-IOC-2017, October 18-21 2017, Bor Lake, Serbia (2017):594-597,
https://hdl.handle.net/21.15107/rcub_cer_7259 .

TY  - CONF
AU  - Stević, Zoran
AU  - Vlahović, Milica
AU  - Martinović, Sanja
AU  - Dimitrijević, Stevan
AU  - Dimitrijević, Silvana
AU  - Stević, Miša
PY  - 2017
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/7260
AB  - Pulse reverse power modes are used in order to obtain metal coatings with similar or better characteristics, compared with the coatings produced by constant current. Pulse reverse modes increase production and energy efficiency of electroplating cells with the use of higher density currents. In this paper, we investigate optimisation of systems for standard electrodeposition by choosing the suitable duration and intensity of the pulses. It was shown that energy efficiency of the process can be achieved with satisfactory quality of coatings and without expensive and often dangerous additives in the electrolyte.
PB  - Union of Mechanical and Electrical Engineers and Technicains of Serbia (SMEITS)
PB  - Society for Renewable Electrical Power Sources
C3  - Proceedings - 5th International Conference on Renewable Electrical Power Sources-MKOIEE, 12 and 13 October 2017, Sava Center, Belgrade / Zbornik radova - pisanih za 5. Međunarodnu konferenciju o obnovljivim izvorima električne energije, 12. i 13. oktobar 2017, Sava centar, Beograd
T1  - Energy efficient pulse-reverse regimes of electrodeposition
T1  - Energetski efikasni pulsno-reverzni režimi galvanizacije
SP  - 179
EP  - 184
UR  - https://hdl.handle.net/21.15107/rcub_cer_7260
ER  - 

@conference{
author = "Stević, Zoran and Vlahović, Milica and Martinović, Sanja and Dimitrijević, Stevan and Dimitrijević, Silvana and Stević, Miša",
year = "2017",
abstract = "Pulse reverse power modes are used in order to obtain metal coatings with similar or better characteristics, compared with the coatings produced by constant current. Pulse reverse modes increase production and energy efficiency of electroplating cells with the use of higher density currents. In this paper, we investigate optimisation of systems for standard electrodeposition by choosing the suitable duration and intensity of the pulses. It was shown that energy efficiency of the process can be achieved with satisfactory quality of coatings and without expensive and often dangerous additives in the electrolyte.",
publisher = "Union of Mechanical and Electrical Engineers and Technicains of Serbia (SMEITS), Society for Renewable Electrical Power Sources",
journal = "Proceedings - 5th International Conference on Renewable Electrical Power Sources-MKOIEE, 12 and 13 October 2017, Sava Center, Belgrade / Zbornik radova - pisanih za 5. Međunarodnu konferenciju o obnovljivim izvorima električne energije, 12. i 13. oktobar 2017, Sava centar, Beograd",
title = "Energy efficient pulse-reverse regimes of electrodeposition, Energetski efikasni pulsno-reverzni režimi galvanizacije",
pages = "179-184",
url = "https://hdl.handle.net/21.15107/rcub_cer_7260"
}

Stević, Z., Vlahović, M., Martinović, S., Dimitrijević, S., Dimitrijević, S.,& Stević, M.. (2017). Energy efficient pulse-reverse regimes of electrodeposition. in Proceedings - 5th International Conference on Renewable Electrical Power Sources-MKOIEE, 12 and 13 October 2017, Sava Center, Belgrade / Zbornik radova - pisanih za 5. Međunarodnu konferenciju o obnovljivim izvorima električne energije, 12. i 13. oktobar 2017, Sava centar, Beograd
Union of Mechanical and Electrical Engineers and Technicains of Serbia (SMEITS)., 179-184.
https://hdl.handle.net/21.15107/rcub_cer_7260

Stević Z, Vlahović M, Martinović S, Dimitrijević S, Dimitrijević S, Stević M. Energy efficient pulse-reverse regimes of electrodeposition. in Proceedings - 5th International Conference on Renewable Electrical Power Sources-MKOIEE, 12 and 13 October 2017, Sava Center, Belgrade / Zbornik radova - pisanih za 5. Međunarodnu konferenciju o obnovljivim izvorima električne energije, 12. i 13. oktobar 2017, Sava centar, Beograd. 2017;:179-184.
https://hdl.handle.net/21.15107/rcub_cer_7260 .

Stević, Zoran, Vlahović, Milica, Martinović, Sanja, Dimitrijević, Stevan, Dimitrijević, Silvana, Stević, Miša, "Energy efficient pulse-reverse regimes of electrodeposition" in Proceedings - 5th International Conference on Renewable Electrical Power Sources-MKOIEE, 12 and 13 October 2017, Sava Center, Belgrade / Zbornik radova - pisanih za 5. Međunarodnu konferenciju o obnovljivim izvorima električne energije, 12. i 13. oktobar 2017, Sava centar, Beograd (2017):179-184,
https://hdl.handle.net/21.15107/rcub_cer_7260 .

TY  - CONF
AU  - Pavlović, Marko
AU  - Martinović, Sanja
AU  - Vlahović, Milica
AU  - Dojčinović, Marina
AU  - Stević, Zoran
AU  - Volkov Husović, Tatjana
AU  - Bondarenko, Olexander
PY  - 2017
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/6917
AB  - Cavitation erosion of mullite samples was monitored using vibratory cavitation set up with stationary sample. The level of degradation of the sample was monitored using weight loss and image analysis. Thermal imaging analysis was focused on determination of temperature line profile and histogram of temperature distribution at the end of the experiment. The results of image analysis were compared with infrared thermography results.
PB  - ПП Полiтexперiодика
C3  - Proceedings - XVIII International scientific-practical conference, Modern information and electronic technologies
T1  - Implementation of infrared thermography on defects monitoring during cavitation erosion of mullite ceramic
SP  - 48
EP  - 51
UR  - https://hdl.handle.net/21.15107/rcub_cer_6917
ER  - 

@conference{
author = "Pavlović, Marko and Martinović, Sanja and Vlahović, Milica and Dojčinović, Marina and Stević, Zoran and Volkov Husović, Tatjana and Bondarenko, Olexander",
year = "2017",
abstract = "Cavitation erosion of mullite samples was monitored using vibratory cavitation set up with stationary sample. The level of degradation of the sample was monitored using weight loss and image analysis. Thermal imaging analysis was focused on determination of temperature line profile and histogram of temperature distribution at the end of the experiment. The results of image analysis were compared with infrared thermography results.",
publisher = "ПП Полiтexперiодика",
journal = "Proceedings - XVIII International scientific-practical conference, Modern information and electronic technologies",
title = "Implementation of infrared thermography on defects monitoring during cavitation erosion of mullite ceramic",
pages = "48-51",
url = "https://hdl.handle.net/21.15107/rcub_cer_6917"
}

Pavlović, M., Martinović, S., Vlahović, M., Dojčinović, M., Stević, Z., Volkov Husović, T.,& Bondarenko, O.. (2017). Implementation of infrared thermography on defects monitoring during cavitation erosion of mullite ceramic. in Proceedings - XVIII International scientific-practical conference, Modern information and electronic technologies
ПП Полiтexперiодика., 48-51.
https://hdl.handle.net/21.15107/rcub_cer_6917

Pavlović M, Martinović S, Vlahović M, Dojčinović M, Stević Z, Volkov Husović T, Bondarenko O. Implementation of infrared thermography on defects monitoring during cavitation erosion of mullite ceramic. in Proceedings - XVIII International scientific-practical conference, Modern information and electronic technologies. 2017;:48-51.
https://hdl.handle.net/21.15107/rcub_cer_6917 .

Pavlović, Marko, Martinović, Sanja, Vlahović, Milica, Dojčinović, Marina, Stević, Zoran, Volkov Husović, Tatjana, Bondarenko, Olexander, "Implementation of infrared thermography on defects monitoring during cavitation erosion of mullite ceramic" in Proceedings - XVIII International scientific-practical conference, Modern information and electronic technologies (2017):48-51,
https://hdl.handle.net/21.15107/rcub_cer_6917 .

TY  - CONF
AU  - Volkov Husović, Tatjana
AU  - Pavlović, Marko
AU  - Dojčinović, Marina
AU  - Martinović, Sanja
AU  - Vlahović, Milica
AU  - Stević, Zoran
PY  - 2017
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/6912
AB  - Cavitation erosion of mullite, cordierite and zircon silicate was investigated. Cavitation erosion test was applied using standard the ultrasonic vibratory cavitation set up with stationary sample. weight loss as well as image analysis measurements were used for comparison of the different samples to the effects of cavitation. In this paper image analysis was implemented for monitoring degradation level during testing, as well as number of formed pits during the tests, and their characteristics (average diameter and area). Thermal imaging analysis was focused on determination on temperature line profile histogram of temperature distribution at the end of experiment. Obtained results will be discussed in order to obtain optimal procedure to be followed for degradation determination caused by cavitation erosion.
PB  - Belgrade : Vinča Institute of Nuclear Sciences
PB  - Serbian Society for Nanotechnologies and nanomedicine
PB  - Serbian Society for Refractory and process Industry
PB  - Real S. Doo
C3  - Programme and the Book of Abstracts - Third Regional Roundtable: Refractory, Process Industry, Nanotechnology and Nanomedicine (Rosov pinn 2017)
T1  - Implementation of image analysis on monitoring degradation of refractory samples: cavitation erosion behavior of mullite, zircon silicate and cordierite samples
SP  - 27
EP  - 28
UR  - https://hdl.handle.net/21.15107/rcub_cer_6912
ER  - 

@conference{
author = "Volkov Husović, Tatjana and Pavlović, Marko and Dojčinović, Marina and Martinović, Sanja and Vlahović, Milica and Stević, Zoran",
year = "2017",
abstract = "Cavitation erosion of mullite, cordierite and zircon silicate was investigated. Cavitation erosion test was applied using standard the ultrasonic vibratory cavitation set up with stationary sample. weight loss as well as image analysis measurements were used for comparison of the different samples to the effects of cavitation. In this paper image analysis was implemented for monitoring degradation level during testing, as well as number of formed pits during the tests, and their characteristics (average diameter and area). Thermal imaging analysis was focused on determination on temperature line profile histogram of temperature distribution at the end of experiment. Obtained results will be discussed in order to obtain optimal procedure to be followed for degradation determination caused by cavitation erosion.",
publisher = "Belgrade : Vinča Institute of Nuclear Sciences, Serbian Society for Nanotechnologies and nanomedicine, Serbian Society for Refractory and process Industry, Real S. Doo",
journal = "Programme and the Book of Abstracts - Third Regional Roundtable: Refractory, Process Industry, Nanotechnology and Nanomedicine (Rosov pinn 2017)",
title = "Implementation of image analysis on monitoring degradation of refractory samples: cavitation erosion behavior of mullite, zircon silicate and cordierite samples",
pages = "27-28",
url = "https://hdl.handle.net/21.15107/rcub_cer_6912"
}

Volkov Husović, T., Pavlović, M., Dojčinović, M., Martinović, S., Vlahović, M.,& Stević, Z.. (2017). Implementation of image analysis on monitoring degradation of refractory samples: cavitation erosion behavior of mullite, zircon silicate and cordierite samples. in Programme and the Book of Abstracts - Third Regional Roundtable: Refractory, Process Industry, Nanotechnology and Nanomedicine (Rosov pinn 2017)
Belgrade : Vinča Institute of Nuclear Sciences., 27-28.
https://hdl.handle.net/21.15107/rcub_cer_6912

Volkov Husović T, Pavlović M, Dojčinović M, Martinović S, Vlahović M, Stević Z. Implementation of image analysis on monitoring degradation of refractory samples: cavitation erosion behavior of mullite, zircon silicate and cordierite samples. in Programme and the Book of Abstracts - Third Regional Roundtable: Refractory, Process Industry, Nanotechnology and Nanomedicine (Rosov pinn 2017). 2017;:27-28.
https://hdl.handle.net/21.15107/rcub_cer_6912 .

Volkov Husović, Tatjana, Pavlović, Marko, Dojčinović, Marina, Martinović, Sanja, Vlahović, Milica, Stević, Zoran, "Implementation of image analysis on monitoring degradation of refractory samples: cavitation erosion behavior of mullite, zircon silicate and cordierite samples" in Programme and the Book of Abstracts - Third Regional Roundtable: Refractory, Process Industry, Nanotechnology and Nanomedicine (Rosov pinn 2017) (2017):27-28,
https://hdl.handle.net/21.15107/rcub_cer_6912 .

TY  - CONF
AU  - Pavlović, Marko
AU  - Dojčinović, Marina
AU  - Majstorović, Jelena
AU  - Martinović, Sanja
AU  - Vlahović, Milica
AU  - Stević, Zoran
AU  - Volkov Husović, Tatjana
PY  - 2017
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/6911
AB  - Mullite and zircon are widely used for different applications for refractory materials. In this paper their cavitation erosion resistance will be investigated. Cavitation erosion resistance testing will be applied using standard the ultrasonic vibratory cavitation set up with stationary specimen. Weight loss, image analysis, and ultrasonic measurements (Dynamic Young modulus of elasticity) will be used for determination of the effects of cavitation. 
In this paper image analysis will be implemented for monitoring degradation level during the testing, as well as number of formed pits and their characterization (average diameter and area). Ultrasonic measurements will be related to the determination of Dynamic Young modulus of elasticity. Ultrasonic velocities will be measured and used as controlling factor for degradation level during the cavitation erosion testing. 
Obtained results will be discussed in order to compare and analyze resistance of the different materials (mullite and zircon) to cavitation erosion as well as strengths and weaknesses of the used methodology.
PB  - Association of Metallurgical Engineers of Serbia (AMES)
C3  - Metallurgical & Materials Engineering Congress of South East Europe (MMESEE 2017)
T1  - Comparison of cavitation erosion resistance of mullite and zircon samples based on non destructive characterization
SP  - 32
EP  - 32
UR  - https://hdl.handle.net/21.15107/rcub_cer_6911
ER  - 

@conference{
author = "Pavlović, Marko and Dojčinović, Marina and Majstorović, Jelena and Martinović, Sanja and Vlahović, Milica and Stević, Zoran and Volkov Husović, Tatjana",
year = "2017",
abstract = "Mullite and zircon are widely used for different applications for refractory materials. In this paper their cavitation erosion resistance will be investigated. Cavitation erosion resistance testing will be applied using standard the ultrasonic vibratory cavitation set up with stationary specimen. Weight loss, image analysis, and ultrasonic measurements (Dynamic Young modulus of elasticity) will be used for determination of the effects of cavitation. 
In this paper image analysis will be implemented for monitoring degradation level during the testing, as well as number of formed pits and their characterization (average diameter and area). Ultrasonic measurements will be related to the determination of Dynamic Young modulus of elasticity. Ultrasonic velocities will be measured and used as controlling factor for degradation level during the cavitation erosion testing. 
Obtained results will be discussed in order to compare and analyze resistance of the different materials (mullite and zircon) to cavitation erosion as well as strengths and weaknesses of the used methodology.",
publisher = "Association of Metallurgical Engineers of Serbia (AMES)",
journal = "Metallurgical & Materials Engineering Congress of South East Europe (MMESEE 2017)",
title = "Comparison of cavitation erosion resistance of mullite and zircon samples based on non destructive characterization",
pages = "32-32",
url = "https://hdl.handle.net/21.15107/rcub_cer_6911"
}

Pavlović, M., Dojčinović, M., Majstorović, J., Martinović, S., Vlahović, M., Stević, Z.,& Volkov Husović, T.. (2017). Comparison of cavitation erosion resistance of mullite and zircon samples based on non destructive characterization. in Metallurgical & Materials Engineering Congress of South East Europe (MMESEE 2017)
Association of Metallurgical Engineers of Serbia (AMES)., 32-32.
https://hdl.handle.net/21.15107/rcub_cer_6911

Pavlović M, Dojčinović M, Majstorović J, Martinović S, Vlahović M, Stević Z, Volkov Husović T. Comparison of cavitation erosion resistance of mullite and zircon samples based on non destructive characterization. in Metallurgical & Materials Engineering Congress of South East Europe (MMESEE 2017). 2017;:32-32.
https://hdl.handle.net/21.15107/rcub_cer_6911 .

Pavlović, Marko, Dojčinović, Marina, Majstorović, Jelena, Martinović, Sanja, Vlahović, Milica, Stević, Zoran, Volkov Husović, Tatjana, "Comparison of cavitation erosion resistance of mullite and zircon samples based on non destructive characterization" in Metallurgical & Materials Engineering Congress of South East Europe (MMESEE 2017) (2017):32-32,
https://hdl.handle.net/21.15107/rcub_cer_6911 .

TY  - CONF
AU  - Pavlović, Marko
AU  - Dojčinović, Marina
AU  - Majstorović, Jelena
AU  - Martinović, Sanja
AU  - Vlahović, Milica
AU  - Stević, Zoran
AU  - Volkov Husović, Tatjana
PY  - 2017
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/6910
AB  - Mulilte and zircon are widely used for different applications for refractory materials. In this paper their behavior in conditions of the cavitation erosion was investigated. Cavitation erosion testing was applied using standard the ultrasonic vibratory cavitation set up with stationary specimen. Weight loss as well as image analysis were used for comparison of the different samples to the effects of cavitation. In this paper image analysis was implemented for monitoring degradation
level during testing, as well as number of formed pits during testing, and their characterization (average diameter and area). Obtained results were discussed in order to compare and analyze resistance of the different materials (mullite and zircon) to the cavitation erosion, as well as used methodology.
PB  - Institute for Multidisciplinary Research, University of Belgrade
C3  - Programme and the book of abstracts - 4th Conference of the Serbian Society for Ceramic Materials, June 14-16.2017, Belgrade Serbia
T1  - Investigation of image analysis on comparison of cavitation erosion degradation of mullite and zircon samples based
SP  - 90
EP  - 90
UR  - https://hdl.handle.net/21.15107/rcub_cer_6910
ER  - 

@conference{
author = "Pavlović, Marko and Dojčinović, Marina and Majstorović, Jelena and Martinović, Sanja and Vlahović, Milica and Stević, Zoran and Volkov Husović, Tatjana",
year = "2017",
abstract = "Mulilte and zircon are widely used for different applications for refractory materials. In this paper their behavior in conditions of the cavitation erosion was investigated. Cavitation erosion testing was applied using standard the ultrasonic vibratory cavitation set up with stationary specimen. Weight loss as well as image analysis were used for comparison of the different samples to the effects of cavitation. In this paper image analysis was implemented for monitoring degradation
level during testing, as well as number of formed pits during testing, and their characterization (average diameter and area). Obtained results were discussed in order to compare and analyze resistance of the different materials (mullite and zircon) to the cavitation erosion, as well as used methodology.",
publisher = "Institute for Multidisciplinary Research, University of Belgrade",
journal = "Programme and the book of abstracts - 4th Conference of the Serbian Society for Ceramic Materials, June 14-16.2017, Belgrade Serbia",
title = "Investigation of image analysis on comparison of cavitation erosion degradation of mullite and zircon samples based",
pages = "90-90",
url = "https://hdl.handle.net/21.15107/rcub_cer_6910"
}

Pavlović, M., Dojčinović, M., Majstorović, J., Martinović, S., Vlahović, M., Stević, Z.,& Volkov Husović, T.. (2017). Investigation of image analysis on comparison of cavitation erosion degradation of mullite and zircon samples based. in Programme and the book of abstracts - 4th Conference of the Serbian Society for Ceramic Materials, June 14-16.2017, Belgrade Serbia
Institute for Multidisciplinary Research, University of Belgrade., 90-90.
https://hdl.handle.net/21.15107/rcub_cer_6910

Pavlović M, Dojčinović M, Majstorović J, Martinović S, Vlahović M, Stević Z, Volkov Husović T. Investigation of image analysis on comparison of cavitation erosion degradation of mullite and zircon samples based. in Programme and the book of abstracts - 4th Conference of the Serbian Society for Ceramic Materials, June 14-16.2017, Belgrade Serbia. 2017;:90-90.
https://hdl.handle.net/21.15107/rcub_cer_6910 .

Pavlović, Marko, Dojčinović, Marina, Majstorović, Jelena, Martinović, Sanja, Vlahović, Milica, Stević, Zoran, Volkov Husović, Tatjana, "Investigation of image analysis on comparison of cavitation erosion degradation of mullite and zircon samples based" in Programme and the book of abstracts - 4th Conference of the Serbian Society for Ceramic Materials, June 14-16.2017, Belgrade Serbia (2017):90-90,
https://hdl.handle.net/21.15107/rcub_cer_6910 .