TY  - CONF
AU  - Srećković, Milesa
AU  - Janićijević, Aco
AU  - Janićijević, Milovan
AU  - Pantelić, Slađana
AU  - Nedić, Zoran
AU  - Fidanovski, Zoran
AU  - Polić, Suzana R.
PY  - 2023
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/6446
AB  - Interakcija lasera sa materijalom je već dugo godina aktuelna sa mnogo rešenja, koja su postala komercijalna i gde se i ne stavlja u prvi plan da je reč o laserskom izvoru. To se utapa u elionska rešenja i poređenja delovanja snopova plazme, vode, neutrona, mikrotalasa. Razvijaju se osnovni teorijski i prakrtični evaluirani modeli. U modeliranju, modeli se dalje razvijaju, često se odmah prelazi na numeriku i u zavisnosti od energije / snage, repeticije radne laserske stanice, mogu se birati aproksimacije. U radu će se na osnovu eksperimentalnih izlaganja snopovima formirati niz pretpostavki o predviđanju i  krojenju svojstava starog materijala mogućim novim, izazvanim modifikacijama različitim tehnikama. Posebno će se razmotriti i slučajevi gde se ne zanemaruju efekti uzmaka i ovaj pristup je takođe prikazan, kao i sprega sa akustičnim pojavama. Svojstva materijala biće pokrivena novim spektroskopskim podacima, odnosno komparativnošću ili sagledavanjem materijala iz različitih uglova gledanja, pri čemu podudaranje / nepodudaranje sa teorijskim prilazom, samo po sebi, daje novi pogled na materijale. S druge strane, traže se paralelni procesi koji su prisutni tokom interakcije , ali usled pojave nelinearnih efekata pri većim intenzitetima dolazi do promene mesta raznih pragova za njihovo nastupanje (kao stimulativni procesi, indukovani, i koji se pojavljuju pored spontanih). Kako se i sam lasing pojavljuje kao deo interakcije stimulisane svetlosti / zračenja sa materijalom, posmatra se i pitanje  koeficijenata korisnog dejstva lasera i pragovi lasing-а. Postavlja se i paralela interferometrija / holografija / tomografija sa atributom laserska. Izveli smo naše simulacije za neke od procesa interakcije / rasejanja i eksperimentalne ekspozicije različitim tipovima lasera.
AB  - The interaction of lasers with material has been current for many years with many solutions,which have become commercial and where it is not brought to the fore that it is a laser source. It is drowned in elion solutions and compares the effects of plasma beams, water, neutrons, microwaves. Basic theoretical and practical evaluated models are developed. In modeling, models are further developed, often immediately switching to numerics and depending on the energy /power, repetitions of the working laser station, approximations could be chosen. In the paper, on the basis of experimental exposures to beams, a series of assumptions will be formed about the forecast and tailoring of the properties of the old material with possible new ones, caused by modifications with various techniques. Special consideration will also be given to cases where the effects of recoil are not neglected and this approach is also shown, as well as coupling with acoustic phenomena. The properties of materials will be covered with new spectroscopic data, or the comparability or seeing of materials from various angles of view, where matching / non-matching with the theoretical approach, in itself, gives a new view of materials. On the other hand, parallel processes are sought, which are present during the interaction, but due to the appearance of non- linear effects at higher intensities, there is a change in the place of various thresholds for their occurrence (as stimulating processes, induced, which appear in addition  to spontaneous ones). As lasing itself appears as part of the interaction of stimulated light /radiation with the material, the question of the coefficients of the useful effect of the laser and the thresholds of lasing is also observed. Parallel interferometry / holography / tomography with laser attribute is also set up. We performed our simulations for some of the interaction / scattering processes and experimental exposures to different types of lasers.
PB  - Бања Лука: Академија наука и умјетности Републике Српске / Banja Luka : Academy of Sciences and Arts of the Republic of Srpska
C3  - Međunarodni naučni skup Savremeni materijali: zbornik radova
T1  - Materijali, novi tehnološki trendovi, modelovanje interakcije i uloga kvantnih generatora - lasera danas
T1  - Materials, new technological trends, interaction modeling and the role of quantum generators - lasers today
VL  - 15
SP  - 47
EP  - 68
UR  - https://hdl.handle.net/21.15107/rcub_cer_6446
ER  - 

@conference{
author = "Srećković, Milesa and Janićijević, Aco and Janićijević, Milovan and Pantelić, Slađana and Nedić, Zoran and Fidanovski, Zoran and Polić, Suzana R.",
year = "2023",
abstract = "Interakcija lasera sa materijalom je već dugo godina aktuelna sa mnogo rešenja, koja su postala komercijalna i gde se i ne stavlja u prvi plan da je reč o laserskom izvoru. To se utapa u elionska rešenja i poređenja delovanja snopova plazme, vode, neutrona, mikrotalasa. Razvijaju se osnovni teorijski i prakrtični evaluirani modeli. U modeliranju, modeli se dalje razvijaju, često se odmah prelazi na numeriku i u zavisnosti od energije / snage, repeticije radne laserske stanice, mogu se birati aproksimacije. U radu će se na osnovu eksperimentalnih izlaganja snopovima formirati niz pretpostavki o predviđanju i  krojenju svojstava starog materijala mogućim novim, izazvanim modifikacijama različitim tehnikama. Posebno će se razmotriti i slučajevi gde se ne zanemaruju efekti uzmaka i ovaj pristup je takođe prikazan, kao i sprega sa akustičnim pojavama. Svojstva materijala biće pokrivena novim spektroskopskim podacima, odnosno komparativnošću ili sagledavanjem materijala iz različitih uglova gledanja, pri čemu podudaranje / nepodudaranje sa teorijskim prilazom, samo po sebi, daje novi pogled na materijale. S druge strane, traže se paralelni procesi koji su prisutni tokom interakcije , ali usled pojave nelinearnih efekata pri većim intenzitetima dolazi do promene mesta raznih pragova za njihovo nastupanje (kao stimulativni procesi, indukovani, i koji se pojavljuju pored spontanih). Kako se i sam lasing pojavljuje kao deo interakcije stimulisane svetlosti / zračenja sa materijalom, posmatra se i pitanje  koeficijenata korisnog dejstva lasera i pragovi lasing-а. Postavlja se i paralela interferometrija / holografija / tomografija sa atributom laserska. Izveli smo naše simulacije za neke od procesa interakcije / rasejanja i eksperimentalne ekspozicije različitim tipovima lasera., The interaction of lasers with material has been current for many years with many solutions,which have become commercial and where it is not brought to the fore that it is a laser source. It is drowned in elion solutions and compares the effects of plasma beams, water, neutrons, microwaves. Basic theoretical and practical evaluated models are developed. In modeling, models are further developed, often immediately switching to numerics and depending on the energy /power, repetitions of the working laser station, approximations could be chosen. In the paper, on the basis of experimental exposures to beams, a series of assumptions will be formed about the forecast and tailoring of the properties of the old material with possible new ones, caused by modifications with various techniques. Special consideration will also be given to cases where the effects of recoil are not neglected and this approach is also shown, as well as coupling with acoustic phenomena. The properties of materials will be covered with new spectroscopic data, or the comparability or seeing of materials from various angles of view, where matching / non-matching with the theoretical approach, in itself, gives a new view of materials. On the other hand, parallel processes are sought, which are present during the interaction, but due to the appearance of non- linear effects at higher intensities, there is a change in the place of various thresholds for their occurrence (as stimulating processes, induced, which appear in addition  to spontaneous ones). As lasing itself appears as part of the interaction of stimulated light /radiation with the material, the question of the coefficients of the useful effect of the laser and the thresholds of lasing is also observed. Parallel interferometry / holography / tomography with laser attribute is also set up. We performed our simulations for some of the interaction / scattering processes and experimental exposures to different types of lasers.",
publisher = "Бања Лука: Академија наука и умјетности Републике Српске / Banja Luka : Academy of Sciences and Arts of the Republic of Srpska",
journal = "Međunarodni naučni skup Savremeni materijali: zbornik radova",
title = "Materijali, novi tehnološki trendovi, modelovanje interakcije i uloga kvantnih generatora - lasera danas, Materials, new technological trends, interaction modeling and the role of quantum generators - lasers today",
volume = "15",
pages = "47-68",
url = "https://hdl.handle.net/21.15107/rcub_cer_6446"
}

Srećković, M., Janićijević, A., Janićijević, M., Pantelić, S., Nedić, Z., Fidanovski, Z.,& Polić, S. R.. (2023). Materijali, novi tehnološki trendovi, modelovanje interakcije i uloga kvantnih generatora - lasera danas. in Međunarodni naučni skup Savremeni materijali: zbornik radova
Бања Лука: Академија наука и умјетности Републике Српске / Banja Luka : Academy of Sciences and Arts of the Republic of Srpska., 15, 47-68.
https://hdl.handle.net/21.15107/rcub_cer_6446

Srećković M, Janićijević A, Janićijević M, Pantelić S, Nedić Z, Fidanovski Z, Polić SR. Materijali, novi tehnološki trendovi, modelovanje interakcije i uloga kvantnih generatora - lasera danas. in Međunarodni naučni skup Savremeni materijali: zbornik radova. 2023;15:47-68.
https://hdl.handle.net/21.15107/rcub_cer_6446 .

Srećković, Milesa, Janićijević, Aco, Janićijević, Milovan, Pantelić, Slađana, Nedić, Zoran, Fidanovski, Zoran, Polić, Suzana R., "Materijali, novi tehnološki trendovi, modelovanje interakcije i uloga kvantnih generatora - lasera danas" in Međunarodni naučni skup Savremeni materijali: zbornik radova, 15 (2023):47-68,
https://hdl.handle.net/21.15107/rcub_cer_6446 .

TY  - CONF
AU  - Srećković, Milesa
AU  - Tomić, Željka
AU  - Ostojić, Stanko
AU  - Polić, Suzana R.
AU  - Fidanovski, Zoran
AU  - Jevtić, Sanja
AU  - Milanović, Đorđe
AU  - Jevtić, Dragan
AU  - Bugarinović, Aleksandar
PY  - 2017
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/6593
AB  - Of the first laser application  in the field of preservation and diagnostics of cultural heritage, many tasks in the field of physical processes have been ended to today, which include interaction and dimensioning powder structures, controlling the work environment in the process of cleaning objects, as well as the applications of holographic, tomographic, interferent and diffraction and diffraction methods Diagnosticing, memory, authentication, etc. Some of the problems will be considered in this paper, including the necessary software support. The methods of laser cleaning of plaster objects based on literature were analyzed, and in given cases assess was distribution by the dimensions of powder and aerosol particles (analytical). The data obtained are digitized with appropriate software and prepared for further software processing for the sake of the characteristic functions of the distribution. Obtaining distribution is required to assess the protection measures due to risk, which implies dimensions of particles harmful to the human health. This area is directly associated with methods to obtain powders through lasers and apply thin layers, where the optimal working regime of the applied laser is of interest.
AB  - Od prvih primena lasera u području očuvanja i dijagnostike kulturne baštine, do danas je rešeno mnogo zadataka iz područja fizičkih procesa koji uključuju interakciju i dimenzionisanje praškastih struktura, kontrolisanje radne sredine u procesu čišćenja objekata, ali i primene holografskih, tomografskih, interferentnih i difrakcionih metoda za dijagnostikovanje, memorisanje, proveru autentičnosti i td. Neki od problema će biti razmatrani u ovom radu, uključujući i potrebne softverske podrške. Analizirane su metode laserskog čišćenja predmeta na bazi gipsa na osnovu literature i za date slučajeve ocenjena je distribucija po dimenzijama čestica praha i aerosola (analitički). Dobijeni podaci su digitalizovani odgovarajućim softverom i pripremljeni za dalju softversku obradu radi dobijanja karakterističnih funkcija raspodele. Dobijanje raspodele je potrebno za procenu mera zaštite usled rizika, koji podrazumeva dimenzije čestica štetnih za ljudski organizam. Ova se oblast direktno povezuje sa metodama za dobijanje prahova putem lasera i nanošenje tankih slojeva, gde je od interesa optimalan radni režim primenjenog lasera.
PB  - Beograd: Centralni Institut za konzervaciju / Belgrade: Central Institute for Conservation
PB  - Beograd: Društvo za etičnost i vrednovanje u kulturi i nauci / Belgrade: Society for ethics and evaluation in culture and science
C3  - Contemporary support of technological sciences in cultural heritage preservation & ethical aspects
T1  - Some tasks of laser techniques of interest for cultural heritage
T1  - Neki zadaci laserske tehnike od interesa za kulturnu baštinu
SP  - appendix 1
UR  - https://hdl.handle.net/21.15107/rcub_cer_6593
ER  - 

@conference{
author = "Srećković, Milesa and Tomić, Željka and Ostojić, Stanko and Polić, Suzana R. and Fidanovski, Zoran and Jevtić, Sanja and Milanović, Đorđe and Jevtić, Dragan and Bugarinović, Aleksandar",
year = "2017",
abstract = "Of the first laser application  in the field of preservation and diagnostics of cultural heritage, many tasks in the field of physical processes have been ended to today, which include interaction and dimensioning powder structures, controlling the work environment in the process of cleaning objects, as well as the applications of holographic, tomographic, interferent and diffraction and diffraction methods Diagnosticing, memory, authentication, etc. Some of the problems will be considered in this paper, including the necessary software support. The methods of laser cleaning of plaster objects based on literature were analyzed, and in given cases assess was distribution by the dimensions of powder and aerosol particles (analytical). The data obtained are digitized with appropriate software and prepared for further software processing for the sake of the characteristic functions of the distribution. Obtaining distribution is required to assess the protection measures due to risk, which implies dimensions of particles harmful to the human health. This area is directly associated with methods to obtain powders through lasers and apply thin layers, where the optimal working regime of the applied laser is of interest., Od prvih primena lasera u području očuvanja i dijagnostike kulturne baštine, do danas je rešeno mnogo zadataka iz područja fizičkih procesa koji uključuju interakciju i dimenzionisanje praškastih struktura, kontrolisanje radne sredine u procesu čišćenja objekata, ali i primene holografskih, tomografskih, interferentnih i difrakcionih metoda za dijagnostikovanje, memorisanje, proveru autentičnosti i td. Neki od problema će biti razmatrani u ovom radu, uključujući i potrebne softverske podrške. Analizirane su metode laserskog čišćenja predmeta na bazi gipsa na osnovu literature i za date slučajeve ocenjena je distribucija po dimenzijama čestica praha i aerosola (analitički). Dobijeni podaci su digitalizovani odgovarajućim softverom i pripremljeni za dalju softversku obradu radi dobijanja karakterističnih funkcija raspodele. Dobijanje raspodele je potrebno za procenu mera zaštite usled rizika, koji podrazumeva dimenzije čestica štetnih za ljudski organizam. Ova se oblast direktno povezuje sa metodama za dobijanje prahova putem lasera i nanošenje tankih slojeva, gde je od interesa optimalan radni režim primenjenog lasera.",
publisher = "Beograd: Centralni Institut za konzervaciju / Belgrade: Central Institute for Conservation, Beograd: Društvo za etičnost i vrednovanje u kulturi i nauci / Belgrade: Society for ethics and evaluation in culture and science",
journal = "Contemporary support of technological sciences in cultural heritage preservation & ethical aspects",
title = "Some tasks of laser techniques of interest for cultural heritage, Neki zadaci laserske tehnike od interesa za kulturnu baštinu",
pages = "appendix 1",
url = "https://hdl.handle.net/21.15107/rcub_cer_6593"
}

Srećković, M., Tomić, Ž., Ostojić, S., Polić, S. R., Fidanovski, Z., Jevtić, S., Milanović, Đ., Jevtić, D.,& Bugarinović, A.. (2017). Some tasks of laser techniques of interest for cultural heritage. in Contemporary support of technological sciences in cultural heritage preservation & ethical aspects
Beograd: Centralni Institut za konzervaciju / Belgrade: Central Institute for Conservation., appendix 1.
https://hdl.handle.net/21.15107/rcub_cer_6593

Srećković M, Tomić Ž, Ostojić S, Polić SR, Fidanovski Z, Jevtić S, Milanović Đ, Jevtić D, Bugarinović A. Some tasks of laser techniques of interest for cultural heritage. in Contemporary support of technological sciences in cultural heritage preservation & ethical aspects. 2017;:appendix 1.
https://hdl.handle.net/21.15107/rcub_cer_6593 .

Srećković, Milesa, Tomić, Željka, Ostojić, Stanko, Polić, Suzana R., Fidanovski, Zoran, Jevtić, Sanja, Milanović, Đorđe, Jevtić, Dragan, Bugarinović, Aleksandar, "Some tasks of laser techniques of interest for cultural heritage" in Contemporary support of technological sciences in cultural heritage preservation & ethical aspects (2017):appendix 1,
https://hdl.handle.net/21.15107/rcub_cer_6593 .

TY  - CONF
AU  - Srećković, Milesa
AU  - Jevtić, Sanja
AU  - Tomić, Željka
AU  - Đokić-Milošević, Biljana
AU  - Slavković, Nikola
AU  - Bugarinović, Aleksandar
AU  - Polić-Radovanović, Suzana R.
AU  - Knežević, Dragan
AU  - Fidanovski, Zoran
PY  - 2013
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/6386
AB  - Prema tipu primene lasera počinje se zadatak sa odabirom pogodnog kvantnog generatora, a zatim sledi koncepcija dizajna izabrane metode. Prema kompleksnosti sistema simuacije u procesu dizajniranja i procene uspešnosti, zamišljene koncepcije imaju veliku ulogu, pošto su cene razvoja sistema često u širokim granicama. U radu se razmatraju izabrani zahtevi i algoritmi, koji ih prate, kao delovi programskih paketa ili pojedinačno razvijenih sopstvenih rešenja. Izabrane su problematike iz dizajna sistema primene lasera kod interferometara, neki lidarski – ekološki problemi, i problematika kontrole požara, koja se ostvaruje primenom lidarskih sistema.
AB  - The task of the laser application start with selection of adequate quantum generator, and the second step is the design of a chosen method. The wide cost range of the system development and simulation complexity in the designing process, result in the overall evaluation of conception efficiency. The chosen demandes and according algorithms as well as software packages, or own software solutions are presented in this paper. Design problems of laser systems in interferometers, some lidar-ecology applications, and the fire detection and monitoring accomplished by lidar systems, are analysed, too.
PB  - Istočno Sarajevo: Elektrotehnički fakultet
C3  - XII međunarodni naučno-stručni simpozijum INFOTEH-JAHORINA 2013
T1  - Simulacione metode u pristupu projektovanju  lasera od interesa u ekologiji
T1  - Simulation methods approach to designing lasers of interest in ecology
VL  - XII
SP  - 478
EP  - 483
UR  - https://hdl.handle.net/21.15107/rcub_cer_6386
ER  - 

@conference{
author = "Srećković, Milesa and Jevtić, Sanja and Tomić, Željka and Đokić-Milošević, Biljana and Slavković, Nikola and Bugarinović, Aleksandar and Polić-Radovanović, Suzana R. and Knežević, Dragan and Fidanovski, Zoran",
year = "2013",
abstract = "Prema tipu primene lasera počinje se zadatak sa odabirom pogodnog kvantnog generatora, a zatim sledi koncepcija dizajna izabrane metode. Prema kompleksnosti sistema simuacije u procesu dizajniranja i procene uspešnosti, zamišljene koncepcije imaju veliku ulogu, pošto su cene razvoja sistema često u širokim granicama. U radu se razmatraju izabrani zahtevi i algoritmi, koji ih prate, kao delovi programskih paketa ili pojedinačno razvijenih sopstvenih rešenja. Izabrane su problematike iz dizajna sistema primene lasera kod interferometara, neki lidarski – ekološki problemi, i problematika kontrole požara, koja se ostvaruje primenom lidarskih sistema., The task of the laser application start with selection of adequate quantum generator, and the second step is the design of a chosen method. The wide cost range of the system development and simulation complexity in the designing process, result in the overall evaluation of conception efficiency. The chosen demandes and according algorithms as well as software packages, or own software solutions are presented in this paper. Design problems of laser systems in interferometers, some lidar-ecology applications, and the fire detection and monitoring accomplished by lidar systems, are analysed, too.",
publisher = "Istočno Sarajevo: Elektrotehnički fakultet",
journal = "XII međunarodni naučno-stručni simpozijum INFOTEH-JAHORINA 2013",
title = "Simulacione metode u pristupu projektovanju  lasera od interesa u ekologiji, Simulation methods approach to designing lasers of interest in ecology",
volume = "XII",
pages = "478-483",
url = "https://hdl.handle.net/21.15107/rcub_cer_6386"
}

Srećković, M., Jevtić, S., Tomić, Ž., Đokić-Milošević, B., Slavković, N., Bugarinović, A., Polić-Radovanović, S. R., Knežević, D.,& Fidanovski, Z.. (2013). Simulacione metode u pristupu projektovanju  lasera od interesa u ekologiji. in XII međunarodni naučno-stručni simpozijum INFOTEH-JAHORINA 2013
Istočno Sarajevo: Elektrotehnički fakultet., XII, 478-483.
https://hdl.handle.net/21.15107/rcub_cer_6386

Srećković M, Jevtić S, Tomić Ž, Đokić-Milošević B, Slavković N, Bugarinović A, Polić-Radovanović SR, Knežević D, Fidanovski Z. Simulacione metode u pristupu projektovanju  lasera od interesa u ekologiji. in XII međunarodni naučno-stručni simpozijum INFOTEH-JAHORINA 2013. 2013;XII:478-483.
https://hdl.handle.net/21.15107/rcub_cer_6386 .

Srećković, Milesa, Jevtić, Sanja, Tomić, Željka, Đokić-Milošević, Biljana, Slavković, Nikola, Bugarinović, Aleksandar, Polić-Radovanović, Suzana R., Knežević, Dragan, Fidanovski, Zoran, "Simulacione metode u pristupu projektovanju  lasera od interesa u ekologiji" in XII međunarodni naučno-stručni simpozijum INFOTEH-JAHORINA 2013, XII (2013):478-483,
https://hdl.handle.net/21.15107/rcub_cer_6386 .

TY  - CONF
AU  - Srećković, Milesa
AU  - Tomić, Željka
AU  - Fidanovski, Zoran
AU  - Polić-Radovanović, Suzana R.
AU  - Bugarinović, Aleksandar
AU  - Marković-Petrović, Jasna
AU  - Lukić, Lazar
AU  - Krčum, Dušan
PY  - 2011
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/6163
AB  - Konstrukcija optičkih sistema ima svoju dugu tradiciju, koja je zavisno od izbora nekoherentnog ili koherentnog izvora morala da pretrpi modifikacije u teoretskom i praktičnom smislu. Postoji nekoliko pravaca razvoja optičkih komponenata i sistema, kojima se bavi ovaj rad sa izborom karakterističnih elemenata, analitike, matrične optike (polarizacionih, Müllerovih, Jonesovih i dr. matrica), diferencijalnih jednačina određenog reda, sa specijalnim funkcijama, itd. Teorijska optika ima svoje numeričke prilaze i algoritme. Pored aberacija tipa Seidela i hromatskih, pojavljuju se i aberacije novog tipa vezane za kvantne generatore, pored nelinearnih efekata. U traženju optimalnih alata su odabrani programi Zemax i Matlab i njihovi prilazi komponentama za oblikovanje, transformaciju i propagaciju koherentnog snopa. Među njima su komponente za širenje i razdvajanje snopova (beam expander, splitter). Na ovaj način se mogu analizirati i druge komponente i sistemi uz vrednovanje slučaja sa aberacijama (i bez), promene materijala i odabranih tipova lasera.
AB  - Design of optical systems has a long tradition, which is dependent on the choice of  incoherent  or  coherent  sources;  therefore,  it  had  to  undergo  modifications  in  the  theoretical and practical terms. There are several directions in the development of optical components and systems, which are engaged in this paper with a selection of characteristic features,  analysis,  matrix  optics  (polarization,  Müller,  Jones'  et  al.  matrices),  differential  
equations of a certain order, with special functions, etc. Theoretical optics has a numerical approach  and  algorithms.  In  addition  to  Seidel  and  chromatic  aberrations,  there  are  also  new  types  of  aberrations  associated  with  quantum  generators,  in  addition  to  nonlinear  effects.  In  searching  for  optimal  tools  ZEMAX  and  MATLAB  programs  are  selected  and  their  approaches  to  components  design,  transformation  and  propagation  of  a  coherent  beam.  Among  them  are  the  components  to  expand  and  splitt  (separate)  the  beams  (beam  expander,  splitter).  Based  on  this  approaches,  various  (and  different)  components  and  systems   can   be   analysed   and   evaluated   the   cases   with   aberrations   (and   without),   replacement of material and selected types of lasers.
PB  - Istočno Sarajevo: Elektrotehnički fakultet
C3  - Зборник радова - Међународни научно-стручни симпозијум INFOTEH-JAHORINA 2011.
T1  - Analitički i numerički prilaz optičkim sistemima za koherentno i nekoherentno zračenje
T1  - Analitical and numerical approaches to optical systems for coherent and incoherent radiations
VL  - 10
SP  - 186
EP  - 190
UR  - https://hdl.handle.net/21.15107/rcub_cer_6163
ER  - 

@conference{
author = "Srećković, Milesa and Tomić, Željka and Fidanovski, Zoran and Polić-Radovanović, Suzana R. and Bugarinović, Aleksandar and Marković-Petrović, Jasna and Lukić, Lazar and Krčum, Dušan",
year = "2011",
abstract = "Konstrukcija optičkih sistema ima svoju dugu tradiciju, koja je zavisno od izbora nekoherentnog ili koherentnog izvora morala da pretrpi modifikacije u teoretskom i praktičnom smislu. Postoji nekoliko pravaca razvoja optičkih komponenata i sistema, kojima se bavi ovaj rad sa izborom karakterističnih elemenata, analitike, matrične optike (polarizacionih, Müllerovih, Jonesovih i dr. matrica), diferencijalnih jednačina određenog reda, sa specijalnim funkcijama, itd. Teorijska optika ima svoje numeričke prilaze i algoritme. Pored aberacija tipa Seidela i hromatskih, pojavljuju se i aberacije novog tipa vezane za kvantne generatore, pored nelinearnih efekata. U traženju optimalnih alata su odabrani programi Zemax i Matlab i njihovi prilazi komponentama za oblikovanje, transformaciju i propagaciju koherentnog snopa. Među njima su komponente za širenje i razdvajanje snopova (beam expander, splitter). Na ovaj način se mogu analizirati i druge komponente i sistemi uz vrednovanje slučaja sa aberacijama (i bez), promene materijala i odabranih tipova lasera., Design of optical systems has a long tradition, which is dependent on the choice of  incoherent  or  coherent  sources;  therefore,  it  had  to  undergo  modifications  in  the  theoretical and practical terms. There are several directions in the development of optical components and systems, which are engaged in this paper with a selection of characteristic features,  analysis,  matrix  optics  (polarization,  Müller,  Jones'  et  al.  matrices),  differential  
equations of a certain order, with special functions, etc. Theoretical optics has a numerical approach  and  algorithms.  In  addition  to  Seidel  and  chromatic  aberrations,  there  are  also  new  types  of  aberrations  associated  with  quantum  generators,  in  addition  to  nonlinear  effects.  In  searching  for  optimal  tools  ZEMAX  and  MATLAB  programs  are  selected  and  their  approaches  to  components  design,  transformation  and  propagation  of  a  coherent  beam.  Among  them  are  the  components  to  expand  and  splitt  (separate)  the  beams  (beam  expander,  splitter).  Based  on  this  approaches,  various  (and  different)  components  and  systems   can   be   analysed   and   evaluated   the   cases   with   aberrations   (and   without),   replacement of material and selected types of lasers.",
publisher = "Istočno Sarajevo: Elektrotehnički fakultet",
journal = "Зборник радова - Међународни научно-стручни симпозијум INFOTEH-JAHORINA 2011.",
title = "Analitički i numerički prilaz optičkim sistemima za koherentno i nekoherentno zračenje, Analitical and numerical approaches to optical systems for coherent and incoherent radiations",
volume = "10",
pages = "186-190",
url = "https://hdl.handle.net/21.15107/rcub_cer_6163"
}

Srećković, M., Tomić, Ž., Fidanovski, Z., Polić-Radovanović, S. R., Bugarinović, A., Marković-Petrović, J., Lukić, L.,& Krčum, D.. (2011). Analitički i numerički prilaz optičkim sistemima za koherentno i nekoherentno zračenje. in Зборник радова - Међународни научно-стручни симпозијум INFOTEH-JAHORINA 2011.
Istočno Sarajevo: Elektrotehnički fakultet., 10, 186-190.
https://hdl.handle.net/21.15107/rcub_cer_6163

Srećković M, Tomić Ž, Fidanovski Z, Polić-Radovanović SR, Bugarinović A, Marković-Petrović J, Lukić L, Krčum D. Analitički i numerički prilaz optičkim sistemima za koherentno i nekoherentno zračenje. in Зборник радова - Међународни научно-стручни симпозијум INFOTEH-JAHORINA 2011.. 2011;10:186-190.
https://hdl.handle.net/21.15107/rcub_cer_6163 .

Srećković, Milesa, Tomić, Željka, Fidanovski, Zoran, Polić-Radovanović, Suzana R., Bugarinović, Aleksandar, Marković-Petrović, Jasna, Lukić, Lazar, Krčum, Dušan, "Analitički i numerički prilaz optičkim sistemima za koherentno i nekoherentno zračenje" in Зборник радова - Међународни научно-стручни симпозијум INFOTEH-JAHORINA 2011., 10 (2011):186-190,
https://hdl.handle.net/21.15107/rcub_cer_6163 .