TY  - JOUR
AU  - Polić, Suzana R.
AU  - Ristić, Slavica
AU  - Radojković, Bojana
AU  - Bajuk-Bogdanović, Danica
PY  - 2024
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/7367
AB  - In this paper, the state of an archaeological artefact (iron nail) originating from the Studenica Monastery (Serbia) has been presented as well as the possibility of laser cleaning its corrosion layers. To determine the presence of cracks and other defects in the sample, the digital radiographic method was used. The composition of the artefact was analysed by X-ray Fluorescence Spectrometry (XRF) and energy-dispersive X-ray Spectroscopy (EDX). The corrosion products were investigated by X-ray diffraction (XRD), X-ray Pho- toelectron Spectroscopy (XPS), Raman Spectroscopy, and EDX microanalysis. The Nd:YAG laser was used for corrosion cleaning. The morphological modification of the surfaces cleaned by laser was analysed with optical and scanning electron microscopy (SEM). The test results showed that the cleaning of thick corro- sion deposits with a laser is difficult and very expensive. Therefore, it is necessary to combine mechanical or chemical methods with lasers.
PB  - Elsevier
T2  - Journal of Cultural Heritage
T1  - Corroded medieval iron nail from the Studenica Monastery - Material analysis and laser cleaning
VL  - 66
SP  - 367
EP  - 374
DO  - 10.1016/j.culher.2023.12.012
ER  - 

@article{
author = "Polić, Suzana R. and Ristić, Slavica and Radojković, Bojana and Bajuk-Bogdanović, Danica",
year = "2024",
abstract = "In this paper, the state of an archaeological artefact (iron nail) originating from the Studenica Monastery (Serbia) has been presented as well as the possibility of laser cleaning its corrosion layers. To determine the presence of cracks and other defects in the sample, the digital radiographic method was used. The composition of the artefact was analysed by X-ray Fluorescence Spectrometry (XRF) and energy-dispersive X-ray Spectroscopy (EDX). The corrosion products were investigated by X-ray diffraction (XRD), X-ray Pho- toelectron Spectroscopy (XPS), Raman Spectroscopy, and EDX microanalysis. The Nd:YAG laser was used for corrosion cleaning. The morphological modification of the surfaces cleaned by laser was analysed with optical and scanning electron microscopy (SEM). The test results showed that the cleaning of thick corro- sion deposits with a laser is difficult and very expensive. Therefore, it is necessary to combine mechanical or chemical methods with lasers.",
publisher = "Elsevier",
journal = "Journal of Cultural Heritage",
title = "Corroded medieval iron nail from the Studenica Monastery - Material analysis and laser cleaning",
volume = "66",
pages = "367-374",
doi = "10.1016/j.culher.2023.12.012"
}

Polić, S. R., Ristić, S., Radojković, B.,& Bajuk-Bogdanović, D.. (2024). Corroded medieval iron nail from the Studenica Monastery - Material analysis and laser cleaning. in Journal of Cultural Heritage
Elsevier., 66, 367-374.
https://doi.org/10.1016/j.culher.2023.12.012

Polić SR, Ristić S, Radojković B, Bajuk-Bogdanović D. Corroded medieval iron nail from the Studenica Monastery - Material analysis and laser cleaning. in Journal of Cultural Heritage. 2024;66:367-374.
doi:10.1016/j.culher.2023.12.012 .

Polić, Suzana R., Ristić, Slavica, Radojković, Bojana, Bajuk-Bogdanović, Danica, "Corroded medieval iron nail from the Studenica Monastery - Material analysis and laser cleaning" in Journal of Cultural Heritage, 66 (2024):367-374,
https://doi.org/10.1016/j.culher.2023.12.012 . .

TY  - CONF
AU  - Srećković, Milesa
AU  - Janićijević, Aco
AU  - Janićijević, Milovan
AU  - Pantelić, Slađana
AU  - Nedić, Zoran
AU  - Fidanovski, Zoran
AU  - Polić, Suzana R.
PY  - 2023
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/6446
AB  - Interakcija lasera sa materijalom je već dugo godina aktuelna sa mnogo rešenja, koja su postala komercijalna i gde se i ne stavlja u prvi plan da je reč o laserskom izvoru. To se utapa u elionska rešenja i poređenja delovanja snopova plazme, vode, neutrona, mikrotalasa. Razvijaju se osnovni teorijski i prakrtični evaluirani modeli. U modeliranju, modeli se dalje razvijaju, često se odmah prelazi na numeriku i u zavisnosti od energije / snage, repeticije radne laserske stanice, mogu se birati aproksimacije. U radu će se na osnovu eksperimentalnih izlaganja snopovima formirati niz pretpostavki o predviđanju i  krojenju svojstava starog materijala mogućim novim, izazvanim modifikacijama različitim tehnikama. Posebno će se razmotriti i slučajevi gde se ne zanemaruju efekti uzmaka i ovaj pristup je takođe prikazan, kao i sprega sa akustičnim pojavama. Svojstva materijala biće pokrivena novim spektroskopskim podacima, odnosno komparativnošću ili sagledavanjem materijala iz različitih uglova gledanja, pri čemu podudaranje / nepodudaranje sa teorijskim prilazom, samo po sebi, daje novi pogled na materijale. S druge strane, traže se paralelni procesi koji su prisutni tokom interakcije , ali usled pojave nelinearnih efekata pri većim intenzitetima dolazi do promene mesta raznih pragova za njihovo nastupanje (kao stimulativni procesi, indukovani, i koji se pojavljuju pored spontanih). Kako se i sam lasing pojavljuje kao deo interakcije stimulisane svetlosti / zračenja sa materijalom, posmatra se i pitanje  koeficijenata korisnog dejstva lasera i pragovi lasing-а. Postavlja se i paralela interferometrija / holografija / tomografija sa atributom laserska. Izveli smo naše simulacije za neke od procesa interakcije / rasejanja i eksperimentalne ekspozicije različitim tipovima lasera.
AB  - The interaction of lasers with material has been current for many years with many solutions,which have become commercial and where it is not brought to the fore that it is a laser source. It is drowned in elion solutions and compares the effects of plasma beams, water, neutrons, microwaves. Basic theoretical and practical evaluated models are developed. In modeling, models are further developed, often immediately switching to numerics and depending on the energy /power, repetitions of the working laser station, approximations could be chosen. In the paper, on the basis of experimental exposures to beams, a series of assumptions will be formed about the forecast and tailoring of the properties of the old material with possible new ones, caused by modifications with various techniques. Special consideration will also be given to cases where the effects of recoil are not neglected and this approach is also shown, as well as coupling with acoustic phenomena. The properties of materials will be covered with new spectroscopic data, or the comparability or seeing of materials from various angles of view, where matching / non-matching with the theoretical approach, in itself, gives a new view of materials. On the other hand, parallel processes are sought, which are present during the interaction, but due to the appearance of non- linear effects at higher intensities, there is a change in the place of various thresholds for their occurrence (as stimulating processes, induced, which appear in addition  to spontaneous ones). As lasing itself appears as part of the interaction of stimulated light /radiation with the material, the question of the coefficients of the useful effect of the laser and the thresholds of lasing is also observed. Parallel interferometry / holography / tomography with laser attribute is also set up. We performed our simulations for some of the interaction / scattering processes and experimental exposures to different types of lasers.
PB  - Бања Лука: Академија наука и умјетности Републике Српске / Banja Luka : Academy of Sciences and Arts of the Republic of Srpska
C3  - Međunarodni naučni skup Savremeni materijali: zbornik radova
T1  - Materijali, novi tehnološki trendovi, modelovanje interakcije i uloga kvantnih generatora - lasera danas
T1  - Materials, new technological trends, interaction modeling and the role of quantum generators - lasers today
VL  - 15
SP  - 47
EP  - 68
UR  - https://hdl.handle.net/21.15107/rcub_cer_6446
ER  - 

@conference{
author = "Srećković, Milesa and Janićijević, Aco and Janićijević, Milovan and Pantelić, Slađana and Nedić, Zoran and Fidanovski, Zoran and Polić, Suzana R.",
year = "2023",
abstract = "Interakcija lasera sa materijalom je već dugo godina aktuelna sa mnogo rešenja, koja su postala komercijalna i gde se i ne stavlja u prvi plan da je reč o laserskom izvoru. To se utapa u elionska rešenja i poređenja delovanja snopova plazme, vode, neutrona, mikrotalasa. Razvijaju se osnovni teorijski i prakrtični evaluirani modeli. U modeliranju, modeli se dalje razvijaju, često se odmah prelazi na numeriku i u zavisnosti od energije / snage, repeticije radne laserske stanice, mogu se birati aproksimacije. U radu će se na osnovu eksperimentalnih izlaganja snopovima formirati niz pretpostavki o predviđanju i  krojenju svojstava starog materijala mogućim novim, izazvanim modifikacijama različitim tehnikama. Posebno će se razmotriti i slučajevi gde se ne zanemaruju efekti uzmaka i ovaj pristup je takođe prikazan, kao i sprega sa akustičnim pojavama. Svojstva materijala biće pokrivena novim spektroskopskim podacima, odnosno komparativnošću ili sagledavanjem materijala iz različitih uglova gledanja, pri čemu podudaranje / nepodudaranje sa teorijskim prilazom, samo po sebi, daje novi pogled na materijale. S druge strane, traže se paralelni procesi koji su prisutni tokom interakcije , ali usled pojave nelinearnih efekata pri većim intenzitetima dolazi do promene mesta raznih pragova za njihovo nastupanje (kao stimulativni procesi, indukovani, i koji se pojavljuju pored spontanih). Kako se i sam lasing pojavljuje kao deo interakcije stimulisane svetlosti / zračenja sa materijalom, posmatra se i pitanje  koeficijenata korisnog dejstva lasera i pragovi lasing-а. Postavlja se i paralela interferometrija / holografija / tomografija sa atributom laserska. Izveli smo naše simulacije za neke od procesa interakcije / rasejanja i eksperimentalne ekspozicije različitim tipovima lasera., The interaction of lasers with material has been current for many years with many solutions,which have become commercial and where it is not brought to the fore that it is a laser source. It is drowned in elion solutions and compares the effects of plasma beams, water, neutrons, microwaves. Basic theoretical and practical evaluated models are developed. In modeling, models are further developed, often immediately switching to numerics and depending on the energy /power, repetitions of the working laser station, approximations could be chosen. In the paper, on the basis of experimental exposures to beams, a series of assumptions will be formed about the forecast and tailoring of the properties of the old material with possible new ones, caused by modifications with various techniques. Special consideration will also be given to cases where the effects of recoil are not neglected and this approach is also shown, as well as coupling with acoustic phenomena. The properties of materials will be covered with new spectroscopic data, or the comparability or seeing of materials from various angles of view, where matching / non-matching with the theoretical approach, in itself, gives a new view of materials. On the other hand, parallel processes are sought, which are present during the interaction, but due to the appearance of non- linear effects at higher intensities, there is a change in the place of various thresholds for their occurrence (as stimulating processes, induced, which appear in addition  to spontaneous ones). As lasing itself appears as part of the interaction of stimulated light /radiation with the material, the question of the coefficients of the useful effect of the laser and the thresholds of lasing is also observed. Parallel interferometry / holography / tomography with laser attribute is also set up. We performed our simulations for some of the interaction / scattering processes and experimental exposures to different types of lasers.",
publisher = "Бања Лука: Академија наука и умјетности Републике Српске / Banja Luka : Academy of Sciences and Arts of the Republic of Srpska",
journal = "Međunarodni naučni skup Savremeni materijali: zbornik radova",
title = "Materijali, novi tehnološki trendovi, modelovanje interakcije i uloga kvantnih generatora - lasera danas, Materials, new technological trends, interaction modeling and the role of quantum generators - lasers today",
volume = "15",
pages = "47-68",
url = "https://hdl.handle.net/21.15107/rcub_cer_6446"
}

Srećković, M., Janićijević, A., Janićijević, M., Pantelić, S., Nedić, Z., Fidanovski, Z.,& Polić, S. R.. (2023). Materijali, novi tehnološki trendovi, modelovanje interakcije i uloga kvantnih generatora - lasera danas. in Međunarodni naučni skup Savremeni materijali: zbornik radova
Бања Лука: Академија наука и умјетности Републике Српске / Banja Luka : Academy of Sciences and Arts of the Republic of Srpska., 15, 47-68.
https://hdl.handle.net/21.15107/rcub_cer_6446

Srećković M, Janićijević A, Janićijević M, Pantelić S, Nedić Z, Fidanovski Z, Polić SR. Materijali, novi tehnološki trendovi, modelovanje interakcije i uloga kvantnih generatora - lasera danas. in Međunarodni naučni skup Savremeni materijali: zbornik radova. 2023;15:47-68.
https://hdl.handle.net/21.15107/rcub_cer_6446 .

Srećković, Milesa, Janićijević, Aco, Janićijević, Milovan, Pantelić, Slađana, Nedić, Zoran, Fidanovski, Zoran, Polić, Suzana R., "Materijali, novi tehnološki trendovi, modelovanje interakcije i uloga kvantnih generatora - lasera danas" in Međunarodni naučni skup Savremeni materijali: zbornik radova, 15 (2023):47-68,
https://hdl.handle.net/21.15107/rcub_cer_6446 .

TY  - CONF
AU  - Stević, Zoran
AU  - Begenišić, Borivoje
AU  - Murgaski, Dušan
AU  - Stajić, Luka
AU  - Petronić, Sanja
AU  - Radovanović, Ilija
AU  - Polić, Suzana R.
PY  - 2023
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/7067
AB  - Electric vehicles have become increasingly popular in recent years due to general global
warming but also due to technological advances, cost reductions, increased battery charging capabilities,
etc. In order to achieve the most outstanding possible efficiency of the vehicle, the thermal
management system of electric vehicles must be efficient throughout the year. One of the problems
is that the temperature distribution in the induction motor is not uniform, so that local overheating
can occur. Thermoelectric materials make it possible to convert a temperature gradient into electrical
energy. The material properties of the motor impose a temperature limit. This paper will describe
the materials used for TEE and their impact on the efficiency of electric vehicles. A thermal
model represents the temperature distribution within the induction motor, batteries and the entire
vehicle, as well as problems that may occur during operation. Convective heat transfer plays an important
role in better performance in battery cell development. In particular, the effect of temperature
has a significant impact on the behaviour of the battery during acceleration and regenerative
braking events. This paper investigates the temperature distribution inside the battery.
AB  - Električna vozila poslednjih godina postaju sve popularnija usled opšteg globalnog zagrevanja, ali
i usled napretka tehnologije, smanjenja troškova, povećavanja mogućnosti punjenja baterija itd. Za
postizanje što veće efikasnosti vozila potrebno je da sistem termičkog upravljanja električnim
vozilima bude efikasan tokom cele godine. Jedan od problema je da raspodela temperature u
pogonskom motoru nije ravnomerna pa može doći do lokalnog pregrevanja. Termoelektrični
materijali omogućavaju pretvaranje temperaturnog gradijenta u električnu energiju. Svojstva
materijala motora nameću temperaturnu granicu. U ovom radu biće opisani materijali koje se
koriste za termoelektrične elemente i njihov uticaj na efikasnost električnih vozila. Termalni model
se koristi da bi se predstavila distribuciju temperature unutar indukcionog motora, baterija i celog
vozila, kao i problemi koji se mogu javiti tokom rada. Konvektivni prenos toplote ima važnu ulogu
za što bolje performanse u razvoju baterijske ćelije. Posebno, raspodela toplote ima značajan uticaj
na ponašanje baterije tokom događaja ubrzanja i regenerativnog kočenja. U ovom radu se istražuje
i analizira distribucija temperature unutar baterije.
PB  - Union of Mechanical and Electrical Engineers and Technicains of Serbia (SMEITS)
PB  - Society for Renewable Electrical Power Sources
C3  - Proceedings - 11th International Conference on Renewable Electrical Power Sources
T1  - Značaj distribucije toplote u savremenim energetski efikasnim električnim vozilima
T1  - Importance of heat distribution in modern energy efficient electrical vehicles
SP  - 227
EP  - 231
UR  - https://hdl.handle.net/21.15107/rcub_cer_7067
ER  - 

@conference{
author = "Stević, Zoran and Begenišić, Borivoje and Murgaski, Dušan and Stajić, Luka and Petronić, Sanja and Radovanović, Ilija and Polić, Suzana R.",
year = "2023",
abstract = "Electric vehicles have become increasingly popular in recent years due to general global
warming but also due to technological advances, cost reductions, increased battery charging capabilities,
etc. In order to achieve the most outstanding possible efficiency of the vehicle, the thermal
management system of electric vehicles must be efficient throughout the year. One of the problems
is that the temperature distribution in the induction motor is not uniform, so that local overheating
can occur. Thermoelectric materials make it possible to convert a temperature gradient into electrical
energy. The material properties of the motor impose a temperature limit. This paper will describe
the materials used for TEE and their impact on the efficiency of electric vehicles. A thermal
model represents the temperature distribution within the induction motor, batteries and the entire
vehicle, as well as problems that may occur during operation. Convective heat transfer plays an important
role in better performance in battery cell development. In particular, the effect of temperature
has a significant impact on the behaviour of the battery during acceleration and regenerative
braking events. This paper investigates the temperature distribution inside the battery., Električna vozila poslednjih godina postaju sve popularnija usled opšteg globalnog zagrevanja, ali
i usled napretka tehnologije, smanjenja troškova, povećavanja mogućnosti punjenja baterija itd. Za
postizanje što veće efikasnosti vozila potrebno je da sistem termičkog upravljanja električnim
vozilima bude efikasan tokom cele godine. Jedan od problema je da raspodela temperature u
pogonskom motoru nije ravnomerna pa može doći do lokalnog pregrevanja. Termoelektrični
materijali omogućavaju pretvaranje temperaturnog gradijenta u električnu energiju. Svojstva
materijala motora nameću temperaturnu granicu. U ovom radu biće opisani materijali koje se
koriste za termoelektrične elemente i njihov uticaj na efikasnost električnih vozila. Termalni model
se koristi da bi se predstavila distribuciju temperature unutar indukcionog motora, baterija i celog
vozila, kao i problemi koji se mogu javiti tokom rada. Konvektivni prenos toplote ima važnu ulogu
za što bolje performanse u razvoju baterijske ćelije. Posebno, raspodela toplote ima značajan uticaj
na ponašanje baterije tokom događaja ubrzanja i regenerativnog kočenja. U ovom radu se istražuje
i analizira distribucija temperature unutar baterije.",
publisher = "Union of Mechanical and Electrical Engineers and Technicains of Serbia (SMEITS), Society for Renewable Electrical Power Sources",
journal = "Proceedings - 11th International Conference on Renewable Electrical Power Sources",
title = "Značaj distribucije toplote u savremenim energetski efikasnim električnim vozilima, Importance of heat distribution in modern energy efficient electrical vehicles",
pages = "227-231",
url = "https://hdl.handle.net/21.15107/rcub_cer_7067"
}

Stević, Z., Begenišić, B., Murgaski, D., Stajić, L., Petronić, S., Radovanović, I.,& Polić, S. R.. (2023). Značaj distribucije toplote u savremenim energetski efikasnim električnim vozilima. in Proceedings - 11th International Conference on Renewable Electrical Power Sources
Union of Mechanical and Electrical Engineers and Technicains of Serbia (SMEITS)., 227-231.
https://hdl.handle.net/21.15107/rcub_cer_7067

Stević Z, Begenišić B, Murgaski D, Stajić L, Petronić S, Radovanović I, Polić SR. Značaj distribucije toplote u savremenim energetski efikasnim električnim vozilima. in Proceedings - 11th International Conference on Renewable Electrical Power Sources. 2023;:227-231.
https://hdl.handle.net/21.15107/rcub_cer_7067 .

Stević, Zoran, Begenišić, Borivoje, Murgaski, Dušan, Stajić, Luka, Petronić, Sanja, Radovanović, Ilija, Polić, Suzana R., "Značaj distribucije toplote u savremenim energetski efikasnim električnim vozilima" in Proceedings - 11th International Conference on Renewable Electrical Power Sources (2023):227-231,
https://hdl.handle.net/21.15107/rcub_cer_7067 .

TY  - BOOK
AU  - Polić, Suzana R.
PY  - 2023
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/7371
AB  - Однос научних информација и културе, који је у фокусу овог предавања, за повод има обележавање пола века од успостављања система научних информација у култури и уметности, у Државној библиотеци некадашњег СССР, у оквиру Информационог центра Министарства културе те земље. Ово подсећање указује да је свест о суштинској повезаности науке, културе и уметности, тада омогућила систематску изградњу мултидисциплинарног информационог простора, који је у цивилизацијском погледу био један од значајних темеља у развоју глобалног информационог друштва какво имамо данас. Због тога овако конституисан простор, и пола века од успостављања, представља инспирацију за преиспитивање савременог односа научне информације и културе, од глобалног до локалног разумевања и вредновања мултидисциплинарних знања, у свим сегментима културе. Имајући у виду ширину и сложеност теме, у овом раду однос научне информације и културе је посматран кроз призму музејске делатности.
AB  - The research of relationship of scientific information and culture, which is the focus in this lecture, has a motivation in a short reminiscence about establishing a system of scientific information in culture and art, in the state library of the former USSR, within the information center of the Ministry of Culture of that country. This reminder indicates that the awareness of the essential connection of science, culture and art, then enabled the systematic construction of the multidisciplinary information space, which was one of the significant foundation in the development of the global information society we have today. Therefore, such a constituted space, and half a century from the establishment, is the inspiration for reviewing the modern scientific information and culture, from global to local understanding and evaluation of multidisciplinary knowledge, in all segments of culture. Given the width and complexity of the topic, in this paper, the relationship of scientific information and culture was observed through the Prism of Museum Activity.
PB  - Beograd: SUZIPO
PB  - Beograd : Naučno društvo za razvoj i afirmaciju novih tehnologija
T1  - 50 ГОДИНА ОД ОБЈАВЕ ИЗДАЊА Научная информация и кулътура: Предавање одржано по позиву Научног друштва за развој и афирмацију нових технологија, у Београду, 2. јуна 2023. године
T1  - 50 YEARS SINCE THE PUBLICATION OF THE EDITION Scientific information and culture: Lecture held according to the invitation of the scientific Society for the development and affirmation of new technologies, in Belgrade, June 2, 2023
UR  - https://hdl.handle.net/21.15107/rcub_cer_7371
ER  - 

@book{
author = "Polić, Suzana R.",
year = "2023",
abstract = "Однос научних информација и културе, који је у фокусу овог предавања, за повод има обележавање пола века од успостављања система научних информација у култури и уметности, у Државној библиотеци некадашњег СССР, у оквиру Информационог центра Министарства културе те земље. Ово подсећање указује да је свест о суштинској повезаности науке, културе и уметности, тада омогућила систематску изградњу мултидисциплинарног информационог простора, који је у цивилизацијском погледу био један од значајних темеља у развоју глобалног информационог друштва какво имамо данас. Због тога овако конституисан простор, и пола века од успостављања, представља инспирацију за преиспитивање савременог односа научне информације и културе, од глобалног до локалног разумевања и вредновања мултидисциплинарних знања, у свим сегментима културе. Имајући у виду ширину и сложеност теме, у овом раду однос научне информације и културе је посматран кроз призму музејске делатности., The research of relationship of scientific information and culture, which is the focus in this lecture, has a motivation in a short reminiscence about establishing a system of scientific information in culture and art, in the state library of the former USSR, within the information center of the Ministry of Culture of that country. This reminder indicates that the awareness of the essential connection of science, culture and art, then enabled the systematic construction of the multidisciplinary information space, which was one of the significant foundation in the development of the global information society we have today. Therefore, such a constituted space, and half a century from the establishment, is the inspiration for reviewing the modern scientific information and culture, from global to local understanding and evaluation of multidisciplinary knowledge, in all segments of culture. Given the width and complexity of the topic, in this paper, the relationship of scientific information and culture was observed through the Prism of Museum Activity.",
publisher = "Beograd: SUZIPO, Beograd : Naučno društvo za razvoj i afirmaciju novih tehnologija",
title = "50 ГОДИНА ОД ОБЈАВЕ ИЗДАЊА Научная информация и кулътура: Предавање одржано по позиву Научног друштва за развој и афирмацију нових технологија, у Београду, 2. јуна 2023. године, 50 YEARS SINCE THE PUBLICATION OF THE EDITION Scientific information and culture: Lecture held according to the invitation of the scientific Society for the development and affirmation of new technologies, in Belgrade, June 2, 2023",
url = "https://hdl.handle.net/21.15107/rcub_cer_7371"
}

Polić, S. R.. (2023). 50 ГОДИНА ОД ОБЈАВЕ ИЗДАЊА Научная информация и кулътура: Предавање одржано по позиву Научног друштва за развој и афирмацију нових технологија, у Београду, 2. јуна 2023. године. 
Beograd: SUZIPO..
https://hdl.handle.net/21.15107/rcub_cer_7371

Polić SR. 50 ГОДИНА ОД ОБЈАВЕ ИЗДАЊА Научная информация и кулътура: Предавање одржано по позиву Научног друштва за развој и афирмацију нових технологија, у Београду, 2. јуна 2023. године. 2023;.
https://hdl.handle.net/21.15107/rcub_cer_7371 .

Polić, Suzana R., "50 ГОДИНА ОД ОБЈАВЕ ИЗДАЊА Научная информация и кулътура: Предавање одржано по позиву Научног друштва за развој и афирмацију нових технологија, у Београду, 2. јуна 2023. године" (2023),
https://hdl.handle.net/21.15107/rcub_cer_7371 .

TY  - CONF
AU  - Polić, Suzana R.
PY  - 2023
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/7369
AB  - The focus of this research is a techno-philosophical and praxeologycal analysis of issues into field of design in relationship to connection of ideas, discourses and values of classical and contemporary approaches to intellectual heritage of design. Leitmotif of this research provided two Italian exhibitions, entitled "Design Before Design" and "Design after Design". Multidisciplinary examination cpecially focused to action and meta-action in thinking about design, with view to heritage conservation (materials and technologies), and protection of intangible cultural heritage. The analysis in the paper will be shown on Le Corbusier's work "The die is cast".
PB  - Belgrade : The Academy of Applied Technical Studies "Belgrade"
C3  - International Scientific and Professional Conference - Politehnika 2023, Conference proceedings
T1  - Techno-praxeological opinions about design: views from perspective of protection of cultural heritage
SP  - 650
EP  - 655
UR  - https://hdl.handle.net/21.15107/rcub_cer_7369
ER  - 

@conference{
author = "Polić, Suzana R.",
year = "2023",
abstract = "The focus of this research is a techno-philosophical and praxeologycal analysis of issues into field of design in relationship to connection of ideas, discourses and values of classical and contemporary approaches to intellectual heritage of design. Leitmotif of this research provided two Italian exhibitions, entitled "Design Before Design" and "Design after Design". Multidisciplinary examination cpecially focused to action and meta-action in thinking about design, with view to heritage conservation (materials and technologies), and protection of intangible cultural heritage. The analysis in the paper will be shown on Le Corbusier's work "The die is cast".",
publisher = "Belgrade : The Academy of Applied Technical Studies "Belgrade"",
journal = "International Scientific and Professional Conference - Politehnika 2023, Conference proceedings",
title = "Techno-praxeological opinions about design: views from perspective of protection of cultural heritage",
pages = "650-655",
url = "https://hdl.handle.net/21.15107/rcub_cer_7369"
}

Polić, S. R.. (2023). Techno-praxeological opinions about design: views from perspective of protection of cultural heritage. in International Scientific and Professional Conference - Politehnika 2023, Conference proceedings
Belgrade : The Academy of Applied Technical Studies "Belgrade"., 650-655.
https://hdl.handle.net/21.15107/rcub_cer_7369

Polić SR. Techno-praxeological opinions about design: views from perspective of protection of cultural heritage. in International Scientific and Professional Conference - Politehnika 2023, Conference proceedings. 2023;:650-655.
https://hdl.handle.net/21.15107/rcub_cer_7369 .

Polić, Suzana R., "Techno-praxeological opinions about design: views from perspective of protection of cultural heritage" in International Scientific and Professional Conference - Politehnika 2023, Conference proceedings (2023):650-655,
https://hdl.handle.net/21.15107/rcub_cer_7369 .

TY  - CONF
AU  - Polić, Suzana R.
PY  - 2023
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/7368
AB  - Sources of inspiration for the formation of authentic orthographic and methodological systems are a challenge for researching the emergence and logic of constituting visual opinion. In this paper, one of the possible formative influences on the work of Rudolf von Laban, the most famous movement theorists in the 20th century, which is also the author of an authentic orthographic system, is being investigated. A research on the work of this artist was conducted on the basis of electronically available documentation from several European collections. One possible parallel was presented, which is based on thesis about processes of subtraction from the archetypal content of visual impressions.
PB  - Belgrade : The Academy of Applied Technical Studies "Belgrade"
C3  - International Scientific and professional conference - Politehnika 2023, Conference proceedings
T1  - Visuality, method, and Laban’s ortography: one parallel
SP  - 656
EP  - 661
UR  - https://hdl.handle.net/21.15107/rcub_cer_7368
ER  - 

@conference{
author = "Polić, Suzana R.",
year = "2023",
abstract = "Sources of inspiration for the formation of authentic orthographic and methodological systems are a challenge for researching the emergence and logic of constituting visual opinion. In this paper, one of the possible formative influences on the work of Rudolf von Laban, the most famous movement theorists in the 20th century, which is also the author of an authentic orthographic system, is being investigated. A research on the work of this artist was conducted on the basis of electronically available documentation from several European collections. One possible parallel was presented, which is based on thesis about processes of subtraction from the archetypal content of visual impressions.",
publisher = "Belgrade : The Academy of Applied Technical Studies "Belgrade"",
journal = "International Scientific and professional conference - Politehnika 2023, Conference proceedings",
title = "Visuality, method, and Laban’s ortography: one parallel",
pages = "656-661",
url = "https://hdl.handle.net/21.15107/rcub_cer_7368"
}

Polić, S. R.. (2023). Visuality, method, and Laban’s ortography: one parallel. in International Scientific and professional conference - Politehnika 2023, Conference proceedings
Belgrade : The Academy of Applied Technical Studies "Belgrade"., 656-661.
https://hdl.handle.net/21.15107/rcub_cer_7368

Polić SR. Visuality, method, and Laban’s ortography: one parallel. in International Scientific and professional conference - Politehnika 2023, Conference proceedings. 2023;:656-661.
https://hdl.handle.net/21.15107/rcub_cer_7368 .

Polić, Suzana R., "Visuality, method, and Laban’s ortography: one parallel" in International Scientific and professional conference - Politehnika 2023, Conference proceedings (2023):656-661,
https://hdl.handle.net/21.15107/rcub_cer_7368 .

TY  - CONF
AU  - Jarić, Marko S.
AU  - Petronić, Sanja Z.
AU  - Budimir, Nikola J.
AU  - Polić, Suzana R.
AU  - Rudonja, Nedžad
PY  - 2023
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/7370
AB  - Heat exchangers used in agricultural processes are mainly manufactured by three technologies: brazed copper-brass, mechanically assembled aluminum and brazed aluminum. The appropriate choice depends on various criteria: price, weight, corrosion resistance, performance in a limited volume, required pressure drops, temperature resistance, reliability, etc. Brazed aluminum is increasingly popular due to several advantages, such as resistance to high pressure and temperatures. Aluminum heat exchangers can be exposed to external and internal corrosion in various environmental conditions. Corrosion has a negative impact on the mechanical integrity and thermal performance of heat exchangers. Therefore, specific operating design parameters, as well as mechanical design characteristics, are of great importance for consideration in construction. Proper selection and design can ensure the successful and safe operation of the heat exchanger and the plant itself. The HVAC industry is directed towards the search for the best solutions in order to increase the performance, energy efficiency and durability of the equipment while reducing the costs of their production. Aluminum pipes and other aluminum components are increasingly replacing copper pipes. In this paper, application, design, assembling process and operation considerations for brazed aluminum heat exchangers used for needs in agricultural processes have presented.
PB  - Belgrade: University of Belgrade - Faculty of Agriculture
C3  - Proceedings / The 6th International Symposium on Agricultural Engineering ISAE-2023, 19th - 21st October 2023, Belgrade
T1  - Dimensioning and assemblying of brazed aluminium heat exchanger for needs of agricultural process plants
SP  - 1
EP  - 8
UR  - https://hdl.handle.net/21.15107/rcub_cer_7370
ER  - 

@conference{
author = "Jarić, Marko S. and Petronić, Sanja Z. and Budimir, Nikola J. and Polić, Suzana R. and Rudonja, Nedžad",
year = "2023",
abstract = "Heat exchangers used in agricultural processes are mainly manufactured by three technologies: brazed copper-brass, mechanically assembled aluminum and brazed aluminum. The appropriate choice depends on various criteria: price, weight, corrosion resistance, performance in a limited volume, required pressure drops, temperature resistance, reliability, etc. Brazed aluminum is increasingly popular due to several advantages, such as resistance to high pressure and temperatures. Aluminum heat exchangers can be exposed to external and internal corrosion in various environmental conditions. Corrosion has a negative impact on the mechanical integrity and thermal performance of heat exchangers. Therefore, specific operating design parameters, as well as mechanical design characteristics, are of great importance for consideration in construction. Proper selection and design can ensure the successful and safe operation of the heat exchanger and the plant itself. The HVAC industry is directed towards the search for the best solutions in order to increase the performance, energy efficiency and durability of the equipment while reducing the costs of their production. Aluminum pipes and other aluminum components are increasingly replacing copper pipes. In this paper, application, design, assembling process and operation considerations for brazed aluminum heat exchangers used for needs in agricultural processes have presented.",
publisher = "Belgrade: University of Belgrade - Faculty of Agriculture",
journal = "Proceedings / The 6th International Symposium on Agricultural Engineering ISAE-2023, 19th - 21st October 2023, Belgrade",
title = "Dimensioning and assemblying of brazed aluminium heat exchanger for needs of agricultural process plants",
pages = "1-8",
url = "https://hdl.handle.net/21.15107/rcub_cer_7370"
}

Jarić, M. S., Petronić, S. Z., Budimir, N. J., Polić, S. R.,& Rudonja, N.. (2023). Dimensioning and assemblying of brazed aluminium heat exchanger for needs of agricultural process plants. in Proceedings / The 6th International Symposium on Agricultural Engineering ISAE-2023, 19th - 21st October 2023, Belgrade
Belgrade: University of Belgrade - Faculty of Agriculture., 1-8.
https://hdl.handle.net/21.15107/rcub_cer_7370

Jarić MS, Petronić SZ, Budimir NJ, Polić SR, Rudonja N. Dimensioning and assemblying of brazed aluminium heat exchanger for needs of agricultural process plants. in Proceedings / The 6th International Symposium on Agricultural Engineering ISAE-2023, 19th - 21st October 2023, Belgrade. 2023;:1-8.
https://hdl.handle.net/21.15107/rcub_cer_7370 .

Jarić, Marko S., Petronić, Sanja Z., Budimir, Nikola J., Polić, Suzana R., Rudonja, Nedžad, "Dimensioning and assemblying of brazed aluminium heat exchanger for needs of agricultural process plants" in Proceedings / The 6th International Symposium on Agricultural Engineering ISAE-2023, 19th - 21st October 2023, Belgrade (2023):1-8,
https://hdl.handle.net/21.15107/rcub_cer_7370 .

TY  - CONF
AU  - Srećković, Milesa
AU  - Zarubica, Veljko
AU  - Kovačević, Aleksander
AU  - Davidović, Milena
AU  - Polić, Suzana R.
PY  - 2022
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/5970
AB  - Ljudski osećaj za boje ima mnogo aspekata,
počevši od čovekovog poimanja sveta oko sebe, do medicinskih
pojmova koji uključuju i daltonizam, ali (u svakodnevici)
najpozitivniji, najhumaniji je čovekov osećaj za deo dana ili noći
(meseca ili godine), za uživanje u heritološkom blagu, koje su
nam ostavili preci, ali ne samo crno-belo. Istraživanja, kojima je
procenjivan ljudski vek, postojanje i razvoj humanih bića, kao i
nastajanje i evolucija flore i faune, sve ovo mora da bude
tretirano multidisciplinarno, bez obzira da li se polazi od stena,
stalaktita i stalagmita, morskih dubina, tragova u atmosferi ili
potrage za planetom koja je slična Zemlji. U radu se daje
nekoliko prilaza boji i kolorimetriji, sa aspekta raznih naučnih
disciplina. Prikazuje se uloga lasera u novim problematikama,
kvantitativne definicije boje i njenih pokazatelja. U području
merenja, daje se prilaz sa aspekta filtera i korektnog opisa stanja
i delovanja odabranih filtera sa savremenim izražavanjima
rezultata, kao i merne metode. Konstatacija boje i njena
deskripcija, ima veliku ulogu u svakodnevnom životu, kao i u
pojedinim tehničkim i mass media primenama, uključivši i
humanističke i tehničke nauke.
AB  - The human sense of color has many aspects, from man's
understanding of the world around him to medical terms that include
colorblind people, but (in everyday life) the most humane is man's
sense of that part of the day or night (month or year), to enjoy
heritage , left to us by our ancestors. Research assessing human life
span, the existence and development of human beings, as well as the
origin and evolution of flora and fauna, all this must be treated multi
disciplinary, whether we start from rocks, stalactites and stalagmites,
sea depths, atmospheric traces or the search for an Earth-like planet.
The paper gives several approaches to color and colorimetry, from
the aspect of various scientific disciplines. The role of lasers in new
problems, quantitative definitions of color and its indicators are
presented, and in the field of measurement, an approach is given
from the aspect of filters and a correct description of the condition
and operation of selected filters with modern expression of results
and measurement methods. The perception of color and its
description play a major role in everyday life, as well as in certain
technical and mass media applications, including the social and
technical sciences.
PB  - Belgrade : ETRAN Society / Београд : Друштво за ЕТРАН
C3  - Proceedings - LXVI ETRAN Conference, 6 ‐ 9 June, 2022, Novi Pazar, Serbia
T1  - Deskripcija, heritologija i metrologija boje
T1  - Description, heritology and color metrology
SP  - SSHE1.5 Page 1
EP  - SSHE1.5 Page 5
UR  - https://hdl.handle.net/21.15107/rcub_cer_5970
ER  - 

@conference{
author = "Srećković, Milesa and Zarubica, Veljko and Kovačević, Aleksander and Davidović, Milena and Polić, Suzana R.",
year = "2022",
abstract = "Ljudski osećaj za boje ima mnogo aspekata,
počevši od čovekovog poimanja sveta oko sebe, do medicinskih
pojmova koji uključuju i daltonizam, ali (u svakodnevici)
najpozitivniji, najhumaniji je čovekov osećaj za deo dana ili noći
(meseca ili godine), za uživanje u heritološkom blagu, koje su
nam ostavili preci, ali ne samo crno-belo. Istraživanja, kojima je
procenjivan ljudski vek, postojanje i razvoj humanih bića, kao i
nastajanje i evolucija flore i faune, sve ovo mora da bude
tretirano multidisciplinarno, bez obzira da li se polazi od stena,
stalaktita i stalagmita, morskih dubina, tragova u atmosferi ili
potrage za planetom koja je slična Zemlji. U radu se daje
nekoliko prilaza boji i kolorimetriji, sa aspekta raznih naučnih
disciplina. Prikazuje se uloga lasera u novim problematikama,
kvantitativne definicije boje i njenih pokazatelja. U području
merenja, daje se prilaz sa aspekta filtera i korektnog opisa stanja
i delovanja odabranih filtera sa savremenim izražavanjima
rezultata, kao i merne metode. Konstatacija boje i njena
deskripcija, ima veliku ulogu u svakodnevnom životu, kao i u
pojedinim tehničkim i mass media primenama, uključivši i
humanističke i tehničke nauke., The human sense of color has many aspects, from man's
understanding of the world around him to medical terms that include
colorblind people, but (in everyday life) the most humane is man's
sense of that part of the day or night (month or year), to enjoy
heritage , left to us by our ancestors. Research assessing human life
span, the existence and development of human beings, as well as the
origin and evolution of flora and fauna, all this must be treated multi
disciplinary, whether we start from rocks, stalactites and stalagmites,
sea depths, atmospheric traces or the search for an Earth-like planet.
The paper gives several approaches to color and colorimetry, from
the aspect of various scientific disciplines. The role of lasers in new
problems, quantitative definitions of color and its indicators are
presented, and in the field of measurement, an approach is given
from the aspect of filters and a correct description of the condition
and operation of selected filters with modern expression of results
and measurement methods. The perception of color and its
description play a major role in everyday life, as well as in certain
technical and mass media applications, including the social and
technical sciences.",
publisher = "Belgrade : ETRAN Society / Београд : Друштво за ЕТРАН",
journal = "Proceedings - LXVI ETRAN Conference, 6 ‐ 9 June, 2022, Novi Pazar, Serbia",
title = "Deskripcija, heritologija i metrologija boje, Description, heritology and color metrology",
pages = "SSHE1.5 Page 1-SSHE1.5 Page 5",
url = "https://hdl.handle.net/21.15107/rcub_cer_5970"
}

Srećković, M., Zarubica, V., Kovačević, A., Davidović, M.,& Polić, S. R.. (2022). Deskripcija, heritologija i metrologija boje. in Proceedings - LXVI ETRAN Conference, 6 ‐ 9 June, 2022, Novi Pazar, Serbia
Belgrade : ETRAN Society / Београд : Друштво за ЕТРАН., SSHE1.5 Page 1-SSHE1.5 Page 5.
https://hdl.handle.net/21.15107/rcub_cer_5970

Srećković M, Zarubica V, Kovačević A, Davidović M, Polić SR. Deskripcija, heritologija i metrologija boje. in Proceedings - LXVI ETRAN Conference, 6 ‐ 9 June, 2022, Novi Pazar, Serbia. 2022;:SSHE1.5 Page 1-SSHE1.5 Page 5.
https://hdl.handle.net/21.15107/rcub_cer_5970 .

Srećković, Milesa, Zarubica, Veljko, Kovačević, Aleksander, Davidović, Milena, Polić, Suzana R., "Deskripcija, heritologija i metrologija boje" in Proceedings - LXVI ETRAN Conference, 6 ‐ 9 June, 2022, Novi Pazar, Serbia (2022):SSHE1.5 Page 1-SSHE1.5 Page 5,
https://hdl.handle.net/21.15107/rcub_cer_5970 .

TY  - CONF
AU  - Polić, Suzana R.
AU  - Srećković, Milesa
AU  - Stević, Zoran
AU  - Malović, Miodrag
AU  - Đurić, Miloš
PY  - 2022
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/5969
AB  - Heritološki fenomeni u oblasti istraživanja kompozitnih umetničkih dela, u vezi sa raznovrsnošću pristupa u kvalitativnim i kvantitativnim kriterijumima za izbor materijala, postavljaju složene zadatke u primeni instrumentalnih metoda, koje prethode izradi protokola za konzervaciju-restauraciju predmeta kulturne baštine. U ovom radu u fokusu je problem heritološke abdukcije, u heurističkoj proceni broja neophodnih analiza, odnosno deficita podataka u fragmentarnim strukturama koje su izraz umetničkog spontaniteta, a sa akcentom na fenomen praemissa minor u traganju za metodološki čvrstom platformom za interpretaciju podataka.
AB  - Taking into account the diversity of approaches in qualitative and quantitative criteria for material selection heritology phenomena in the field of research of composite art works set complex tasks in the application of instrumental methods, which precede the development of protocols for conservation and restoration of cultural heritage. The focus of this paper is on the problem of heritology abduction, particularly in the domain of heuristic assessment concerning the number of necessary analyses, i.e. the deficit of data in fragmentary structures, these being expressions of artistic spontaneity. At the same time, the paper also tackles the phenomenon of minor assumptions while pursuing a methodologically sound platform for interpreting data.
PB  - Belgrade : ETRAN Society / Београд : Друштво за ЕТРАН
C3  - Proceedings - LXVI ETRAN Conference, 6 ‐ 9 June, 2022, Novi Pazar, Serbia
T1  - Problem heritološke abdukcije u vezi sa instrumentalnim analizama materijala kulturne baštine
T1  - The problem of heritology abduction through instrumental analysis of cultural heritage materials
SP  - SSHE1.4 Page 1
EP  - SSHE1.4 Page 6
UR  - https://hdl.handle.net/21.15107/rcub_cer_5969
ER  - 

@conference{
author = "Polić, Suzana R. and Srećković, Milesa and Stević, Zoran and Malović, Miodrag and Đurić, Miloš",
year = "2022",
abstract = "Heritološki fenomeni u oblasti istraživanja kompozitnih umetničkih dela, u vezi sa raznovrsnošću pristupa u kvalitativnim i kvantitativnim kriterijumima za izbor materijala, postavljaju složene zadatke u primeni instrumentalnih metoda, koje prethode izradi protokola za konzervaciju-restauraciju predmeta kulturne baštine. U ovom radu u fokusu je problem heritološke abdukcije, u heurističkoj proceni broja neophodnih analiza, odnosno deficita podataka u fragmentarnim strukturama koje su izraz umetničkog spontaniteta, a sa akcentom na fenomen praemissa minor u traganju za metodološki čvrstom platformom za interpretaciju podataka., Taking into account the diversity of approaches in qualitative and quantitative criteria for material selection heritology phenomena in the field of research of composite art works set complex tasks in the application of instrumental methods, which precede the development of protocols for conservation and restoration of cultural heritage. The focus of this paper is on the problem of heritology abduction, particularly in the domain of heuristic assessment concerning the number of necessary analyses, i.e. the deficit of data in fragmentary structures, these being expressions of artistic spontaneity. At the same time, the paper also tackles the phenomenon of minor assumptions while pursuing a methodologically sound platform for interpreting data.",
publisher = "Belgrade : ETRAN Society / Београд : Друштво за ЕТРАН",
journal = "Proceedings - LXVI ETRAN Conference, 6 ‐ 9 June, 2022, Novi Pazar, Serbia",
title = "Problem heritološke abdukcije u vezi sa instrumentalnim analizama materijala kulturne baštine, The problem of heritology abduction through instrumental analysis of cultural heritage materials",
pages = "SSHE1.4 Page 1-SSHE1.4 Page 6",
url = "https://hdl.handle.net/21.15107/rcub_cer_5969"
}

Polić, S. R., Srećković, M., Stević, Z., Malović, M.,& Đurić, M.. (2022). Problem heritološke abdukcije u vezi sa instrumentalnim analizama materijala kulturne baštine. in Proceedings - LXVI ETRAN Conference, 6 ‐ 9 June, 2022, Novi Pazar, Serbia
Belgrade : ETRAN Society / Београд : Друштво за ЕТРАН., SSHE1.4 Page 1-SSHE1.4 Page 6.
https://hdl.handle.net/21.15107/rcub_cer_5969

Polić SR, Srećković M, Stević Z, Malović M, Đurić M. Problem heritološke abdukcije u vezi sa instrumentalnim analizama materijala kulturne baštine. in Proceedings - LXVI ETRAN Conference, 6 ‐ 9 June, 2022, Novi Pazar, Serbia. 2022;:SSHE1.4 Page 1-SSHE1.4 Page 6.
https://hdl.handle.net/21.15107/rcub_cer_5969 .

Polić, Suzana R., Srećković, Milesa, Stević, Zoran, Malović, Miodrag, Đurić, Miloš, "Problem heritološke abdukcije u vezi sa instrumentalnim analizama materijala kulturne baštine" in Proceedings - LXVI ETRAN Conference, 6 ‐ 9 June, 2022, Novi Pazar, Serbia (2022):SSHE1.4 Page 1-SSHE1.4 Page 6,
https://hdl.handle.net/21.15107/rcub_cer_5969 .

TY  - CONF
AU  - Polić, Suzana R.
AU  - Srećković, Milesa
AU  - Stević, Zoran
AU  - Bojanić, Slobodan
AU  - Tomić, Željka
PY  - 2022
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/5968
AB  - Primena veštačke inteligencije u zaštiti kulturne baštine, na ovom stepenu razvoja, odnosi se prevashodno na domen akvizicije podataka, koji mogu biti od značaja za stvaranje šire slike o sredstvima i metodama realizacije umetničkih dela. U ovom radu, istražuje se pitanje integracije naučnih znanja u kontekstu primene veštačke inteligencije, u vezi sa delima velikih formata, i to u domenima specifikuma organizacije materije, diferencijacije komponenti i njihovih elemenata, strukturnih planova i matrica koje daju kvalitet unutrašnje koherencije i grade performativnu snagu dela. Multidisciplinarna opservacija treba da doprinese procesu objektivizacije znanja, do koje se, prirodom predmeta istraživanja, može doći samo integracijom elemenata više nauka i naučnih disciplina.
AB  - The application of artificial intelligence in cultural heritage, at this degree of development, refers primarily to the domain of data acquisitions that may be important for the creation of a wider image on the funds and methods of the implementation of works of art. In this paper, the issue of integration of scientific knowledge is investigated in the context of the application of artificial intelligence regarding the works of large formats. It is the domains of the specifics of the organization of matter, the differentiation of components and their elements, structural plans and matrix that give the quality of internal coherence and build the performative power of the work. Multidisciplinary observation should contribute to the process of objectifying the knowledge, to which the nature of the course of research, can only be reached by the integration of elements of several sciences and scientific disciplines.
PB  - Belgrade : ETRAN Society / Београд : Друштво за ЕТРАН
C3  - Proceedings - LXVI ETRAN Conference, 6 ‐ 9, June, 2022, Novi Pazar, Serbia
T1  - Integracije naučnih znanja u primeni veštačke inteligencije u heritološkim problemima
T1  - Integration of scientific knowledge in the application of artificial intelligence in heritological problems
SP  - SSHE1.3 Page 1
EP  - SSHE1.3 Page 4
UR  - https://hdl.handle.net/21.15107/rcub_cer_5968
ER  - 

@conference{
author = "Polić, Suzana R. and Srećković, Milesa and Stević, Zoran and Bojanić, Slobodan and Tomić, Željka",
year = "2022",
abstract = "Primena veštačke inteligencije u zaštiti kulturne baštine, na ovom stepenu razvoja, odnosi se prevashodno na domen akvizicije podataka, koji mogu biti od značaja za stvaranje šire slike o sredstvima i metodama realizacije umetničkih dela. U ovom radu, istražuje se pitanje integracije naučnih znanja u kontekstu primene veštačke inteligencije, u vezi sa delima velikih formata, i to u domenima specifikuma organizacije materije, diferencijacije komponenti i njihovih elemenata, strukturnih planova i matrica koje daju kvalitet unutrašnje koherencije i grade performativnu snagu dela. Multidisciplinarna opservacija treba da doprinese procesu objektivizacije znanja, do koje se, prirodom predmeta istraživanja, može doći samo integracijom elemenata više nauka i naučnih disciplina., The application of artificial intelligence in cultural heritage, at this degree of development, refers primarily to the domain of data acquisitions that may be important for the creation of a wider image on the funds and methods of the implementation of works of art. In this paper, the issue of integration of scientific knowledge is investigated in the context of the application of artificial intelligence regarding the works of large formats. It is the domains of the specifics of the organization of matter, the differentiation of components and their elements, structural plans and matrix that give the quality of internal coherence and build the performative power of the work. Multidisciplinary observation should contribute to the process of objectifying the knowledge, to which the nature of the course of research, can only be reached by the integration of elements of several sciences and scientific disciplines.",
publisher = "Belgrade : ETRAN Society / Београд : Друштво за ЕТРАН",
journal = "Proceedings - LXVI ETRAN Conference, 6 ‐ 9, June, 2022, Novi Pazar, Serbia",
title = "Integracije naučnih znanja u primeni veštačke inteligencije u heritološkim problemima, Integration of scientific knowledge in the application of artificial intelligence in heritological problems",
pages = "SSHE1.3 Page 1-SSHE1.3 Page 4",
url = "https://hdl.handle.net/21.15107/rcub_cer_5968"
}

Polić, S. R., Srećković, M., Stević, Z., Bojanić, S.,& Tomić, Ž.. (2022). Integracije naučnih znanja u primeni veštačke inteligencije u heritološkim problemima. in Proceedings - LXVI ETRAN Conference, 6 ‐ 9, June, 2022, Novi Pazar, Serbia
Belgrade : ETRAN Society / Београд : Друштво за ЕТРАН., SSHE1.3 Page 1-SSHE1.3 Page 4.
https://hdl.handle.net/21.15107/rcub_cer_5968

Polić SR, Srećković M, Stević Z, Bojanić S, Tomić Ž. Integracije naučnih znanja u primeni veštačke inteligencije u heritološkim problemima. in Proceedings - LXVI ETRAN Conference, 6 ‐ 9, June, 2022, Novi Pazar, Serbia. 2022;:SSHE1.3 Page 1-SSHE1.3 Page 4.
https://hdl.handle.net/21.15107/rcub_cer_5968 .

Polić, Suzana R., Srećković, Milesa, Stević, Zoran, Bojanić, Slobodan, Tomić, Željka, "Integracije naučnih znanja u primeni veštačke inteligencije u heritološkim problemima" in Proceedings - LXVI ETRAN Conference, 6 ‐ 9, June, 2022, Novi Pazar, Serbia (2022):SSHE1.3 Page 1-SSHE1.3 Page 4,
https://hdl.handle.net/21.15107/rcub_cer_5968 .

TY  - CONF
AU  - Srećković, Milesa
AU  - Polić, Suzana R.
AU  - Stević, Zoran
AU  - Zarubica, Veljko
AU  - Ostojić, Stanko
PY  - 2022
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/5935
AB  - Kritička preispitivanja postupaka koji se delovanjem na materijale primenjuju u konzervaciji-restauraciji predmeta kulturne baštine, obuhvataju opšta i pojedinačna pitanja o upotrebi novih tehnologija, posebno lasera, u odnosu na klasične prilaze problematici zaštite artefakata, koji imaju arheološku, istorijsku ili umetničku vrednost. Pitanje etičnosti posmatra se sa više aspekata, koji se odnose na materijalna i nematerijalna postupanja prema predmetima zaštite, u smislu ispunjavanja zadate funkcije odabrane tehnike, a pod uslovima najvišeg stepena bezbednosti i ekološke zaštite. U ovom radu u fokusu istraživanja je karakterizacija proto-konceptualnih rešenja u primeni lasera na materijalima predmeta baštine, sa ciljem utvrđivanja eksplikatornih razlika u obrazlaganju potreba za primenu klasičnih pristupa konzervaciji-restauraciji kulturnog nasleđa, sa posebnim osvrtom u domenu tautoloških praksi
AB  - Critical re-examinations of the procedures applied on materials during the conservation-restoration of cultural heritage objects, including general and individual questions about the use of new technologies, especially lasers, in relation to classical approaches to the protection of artifacts of archaeological, historical or artistic value. The issue of ethics is viewed from several aspects related to tangible and intangible actions towards objects of protection, in terms of fulfilling the given function of the chosen technique, and under the conditions of the highest degree of safety and environmental protection. This paper focuses on the characterization of proto-conceptual solutions in the application of lasers on heritage materials, with the aim of determining explicative differences in explaining the need for classical approaches to conservation-restoration of cultural heritage, with special reference to tautological practices.
PB  - Belgrade : ETRAN Society
C3  - Proceedings - LXVI ETRAN Conference, 6 ‐ 9, June, 2022, Novi Pazar, Serbia
T1  - Proto-konceptualna rešenja u primeni lasera u heritologiji
T1  - Proto-conceptual solutions in the application of lasers in heritology
SP  - SSHE1.6.1
EP  - SSHE1.6.4
UR  - https://hdl.handle.net/21.15107/rcub_cer_5935
ER  - 

@conference{
author = "Srećković, Milesa and Polić, Suzana R. and Stević, Zoran and Zarubica, Veljko and Ostojić, Stanko",
year = "2022",
abstract = "Kritička preispitivanja postupaka koji se delovanjem na materijale primenjuju u konzervaciji-restauraciji predmeta kulturne baštine, obuhvataju opšta i pojedinačna pitanja o upotrebi novih tehnologija, posebno lasera, u odnosu na klasične prilaze problematici zaštite artefakata, koji imaju arheološku, istorijsku ili umetničku vrednost. Pitanje etičnosti posmatra se sa više aspekata, koji se odnose na materijalna i nematerijalna postupanja prema predmetima zaštite, u smislu ispunjavanja zadate funkcije odabrane tehnike, a pod uslovima najvišeg stepena bezbednosti i ekološke zaštite. U ovom radu u fokusu istraživanja je karakterizacija proto-konceptualnih rešenja u primeni lasera na materijalima predmeta baštine, sa ciljem utvrđivanja eksplikatornih razlika u obrazlaganju potreba za primenu klasičnih pristupa konzervaciji-restauraciji kulturnog nasleđa, sa posebnim osvrtom u domenu tautoloških praksi, Critical re-examinations of the procedures applied on materials during the conservation-restoration of cultural heritage objects, including general and individual questions about the use of new technologies, especially lasers, in relation to classical approaches to the protection of artifacts of archaeological, historical or artistic value. The issue of ethics is viewed from several aspects related to tangible and intangible actions towards objects of protection, in terms of fulfilling the given function of the chosen technique, and under the conditions of the highest degree of safety and environmental protection. This paper focuses on the characterization of proto-conceptual solutions in the application of lasers on heritage materials, with the aim of determining explicative differences in explaining the need for classical approaches to conservation-restoration of cultural heritage, with special reference to tautological practices.",
publisher = "Belgrade : ETRAN Society",
journal = "Proceedings - LXVI ETRAN Conference, 6 ‐ 9, June, 2022, Novi Pazar, Serbia",
title = "Proto-konceptualna rešenja u primeni lasera u heritologiji, Proto-conceptual solutions in the application of lasers in heritology",
pages = "SSHE1.6.1-SSHE1.6.4",
url = "https://hdl.handle.net/21.15107/rcub_cer_5935"
}

Srećković, M., Polić, S. R., Stević, Z., Zarubica, V.,& Ostojić, S.. (2022). Proto-konceptualna rešenja u primeni lasera u heritologiji. in Proceedings - LXVI ETRAN Conference, 6 ‐ 9, June, 2022, Novi Pazar, Serbia
Belgrade : ETRAN Society., SSHE1.6.1-SSHE1.6.4.
https://hdl.handle.net/21.15107/rcub_cer_5935

Srećković M, Polić SR, Stević Z, Zarubica V, Ostojić S. Proto-konceptualna rešenja u primeni lasera u heritologiji. in Proceedings - LXVI ETRAN Conference, 6 ‐ 9, June, 2022, Novi Pazar, Serbia. 2022;:SSHE1.6.1-SSHE1.6.4.
https://hdl.handle.net/21.15107/rcub_cer_5935 .

Srećković, Milesa, Polić, Suzana R., Stević, Zoran, Zarubica, Veljko, Ostojić, Stanko, "Proto-konceptualna rešenja u primeni lasera u heritologiji" in Proceedings - LXVI ETRAN Conference, 6 ‐ 9, June, 2022, Novi Pazar, Serbia (2022):SSHE1.6.1-SSHE1.6.4,
https://hdl.handle.net/21.15107/rcub_cer_5935 .

TY  - CONF
AU  - Jarić, Marko
AU  - Petronić, Sanja
AU  - Budimir, Nikola
AU  - Polić, Suzana R.
AU  - Colić, Katarina
PY  - 2022
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/5934
AB  - The paper shows preparation of inspection plan for air cooled heat exchanger in refinery. The importance of proper inspection, traceable prepared plan of inspection is discussed. The inspection of heat exchanger, according to the presented plan, includes visual testing - internal and external, ultrasound testing and liquid penetrate testing. The inspection plan is essential for maintenance the pressure equipment in refineries and is performed according to API 572 and API 510. The inspection of air cooled heat exchanger shows satisfactorily results.
PB  - Zrenjanin : Technical Faculty "Mihajlo Pupin"
C3  - Proceedings of the XII International Conference - Industrial Engineering and Environmental Protection (IIZS 2022), October 06-07, 2022, Zrenjanin, Serbia
T1  - Analysis of inspection plan of air cooled heat exchanger for needs of maintance and safety of oil & gas plants
SP  - 150
EP  - 156
UR  - https://hdl.handle.net/21.15107/rcub_cer_5934
ER  - 

@conference{
author = "Jarić, Marko and Petronić, Sanja and Budimir, Nikola and Polić, Suzana R. and Colić, Katarina",
year = "2022",
abstract = "The paper shows preparation of inspection plan for air cooled heat exchanger in refinery. The importance of proper inspection, traceable prepared plan of inspection is discussed. The inspection of heat exchanger, according to the presented plan, includes visual testing - internal and external, ultrasound testing and liquid penetrate testing. The inspection plan is essential for maintenance the pressure equipment in refineries and is performed according to API 572 and API 510. The inspection of air cooled heat exchanger shows satisfactorily results.",
publisher = "Zrenjanin : Technical Faculty "Mihajlo Pupin"",
journal = "Proceedings of the XII International Conference - Industrial Engineering and Environmental Protection (IIZS 2022), October 06-07, 2022, Zrenjanin, Serbia",
title = "Analysis of inspection plan of air cooled heat exchanger for needs of maintance and safety of oil & gas plants",
pages = "150-156",
url = "https://hdl.handle.net/21.15107/rcub_cer_5934"
}

Jarić, M., Petronić, S., Budimir, N., Polić, S. R.,& Colić, K.. (2022). Analysis of inspection plan of air cooled heat exchanger for needs of maintance and safety of oil & gas plants. in Proceedings of the XII International Conference - Industrial Engineering and Environmental Protection (IIZS 2022), October 06-07, 2022, Zrenjanin, Serbia
Zrenjanin : Technical Faculty "Mihajlo Pupin"., 150-156.
https://hdl.handle.net/21.15107/rcub_cer_5934

Jarić M, Petronić S, Budimir N, Polić SR, Colić K. Analysis of inspection plan of air cooled heat exchanger for needs of maintance and safety of oil & gas plants. in Proceedings of the XII International Conference - Industrial Engineering and Environmental Protection (IIZS 2022), October 06-07, 2022, Zrenjanin, Serbia. 2022;:150-156.
https://hdl.handle.net/21.15107/rcub_cer_5934 .

Jarić, Marko, Petronić, Sanja, Budimir, Nikola, Polić, Suzana R., Colić, Katarina, "Analysis of inspection plan of air cooled heat exchanger for needs of maintance and safety of oil & gas plants" in Proceedings of the XII International Conference - Industrial Engineering and Environmental Protection (IIZS 2022), October 06-07, 2022, Zrenjanin, Serbia (2022):150-156,
https://hdl.handle.net/21.15107/rcub_cer_5934 .

TY  - CONF
AU  - Jarić, Marko
AU  - Petronić, Sanja
AU  - Polić, Suzana R.
AU  - Čolić, Katarina
AU  - Brat, Zagorka
PY  - 2022
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/5933
AB  - Postrojenja za stabilizaciju nafte omogućavaju rekuperaciju i komercijalnu eksploataciju nafte koja se izdvaja iz gasa dopremljenog iz bušotine. Kondenzovani topli tečni ugljovodonici koji su prečišćeni iz prirodnog gasa mogu se koristiti za zagrevanje fluida koji dolazi u proces u kome se vrši njegovo razdvajanje na lakše i tečne komponente. U radu je prikazan pregled razmenjivača toplote nafta-nafta i objašnjen značaj inspekcije u pogledu održivog razvoja i zaštite životne sredine. Debljina materijala merena je ultrazvučnom tehnikom. Određivanje stepena korozije i preostalog radnog veka razmenjivača toplote izvršeni su prema API 510 i API 572 standardu. Vizuelni test je otkrio određena mehanička oštećenja i površinsku koroziju, metoda inspekcije penetrantskim metodama nije detektovala prsline u zavarenim spojevima u vreme pregleda.
AB  - Plant for oil stabilisation is enable to recovery and commercial exploitation of oil which is rectified from excavated raw gas. Condensed hot liquid hydrocarbons that are separated from natural gas can be used to heat the fluid that enters the process in which it is separated into liquid and lighter components. This paper presents the inspection of an oil heat exchanger and explains the importance of inspection regarding sustainable development and environmental protection. The thickness of the material was measured by ultrasonic technique. Determination of corrosion rate and remaining life of oil-oil shell and tube heat exchanger is performed according to the API 510 and API 572 standards. The visual test revealed some mechanical damages and surface corrosion; a liquid penetrant inspection method showed no cracks at the time of inspection.
PB  - Savez mašinskih i elektrotehničkih inženjera i tehničara Srbije (SMEITS)
PB  - Društvo za obnovljive izvore električne energije
C3  - Proceedings - 10th International Conference on Renewable Electrical Power Sources, Belgrade
T1  - Važnost ispitivanja dobošastog razmenjivača toplote nafta-nafta za potrebe održivog razvoja i zaštitu životne sredine
T1  - Importance of inspection of the oil-oil shell and tube heat exchanger for needs of sustainable development and environmental protection
SP  - 157
EP  - 164
UR  - https://hdl.handle.net/21.15107/rcub_cer_5933
ER  - 

@conference{
author = "Jarić, Marko and Petronić, Sanja and Polić, Suzana R. and Čolić, Katarina and Brat, Zagorka",
year = "2022",
abstract = "Postrojenja za stabilizaciju nafte omogućavaju rekuperaciju i komercijalnu eksploataciju nafte koja se izdvaja iz gasa dopremljenog iz bušotine. Kondenzovani topli tečni ugljovodonici koji su prečišćeni iz prirodnog gasa mogu se koristiti za zagrevanje fluida koji dolazi u proces u kome se vrši njegovo razdvajanje na lakše i tečne komponente. U radu je prikazan pregled razmenjivača toplote nafta-nafta i objašnjen značaj inspekcije u pogledu održivog razvoja i zaštite životne sredine. Debljina materijala merena je ultrazvučnom tehnikom. Određivanje stepena korozije i preostalog radnog veka razmenjivača toplote izvršeni su prema API 510 i API 572 standardu. Vizuelni test je otkrio određena mehanička oštećenja i površinsku koroziju, metoda inspekcije penetrantskim metodama nije detektovala prsline u zavarenim spojevima u vreme pregleda., Plant for oil stabilisation is enable to recovery and commercial exploitation of oil which is rectified from excavated raw gas. Condensed hot liquid hydrocarbons that are separated from natural gas can be used to heat the fluid that enters the process in which it is separated into liquid and lighter components. This paper presents the inspection of an oil heat exchanger and explains the importance of inspection regarding sustainable development and environmental protection. The thickness of the material was measured by ultrasonic technique. Determination of corrosion rate and remaining life of oil-oil shell and tube heat exchanger is performed according to the API 510 and API 572 standards. The visual test revealed some mechanical damages and surface corrosion; a liquid penetrant inspection method showed no cracks at the time of inspection.",
publisher = "Savez mašinskih i elektrotehničkih inženjera i tehničara Srbije (SMEITS), Društvo za obnovljive izvore električne energije",
journal = "Proceedings - 10th International Conference on Renewable Electrical Power Sources, Belgrade",
title = "Važnost ispitivanja dobošastog razmenjivača toplote nafta-nafta za potrebe održivog razvoja i zaštitu životne sredine, Importance of inspection of the oil-oil shell and tube heat exchanger for needs of sustainable development and environmental protection",
pages = "157-164",
url = "https://hdl.handle.net/21.15107/rcub_cer_5933"
}

Jarić, M., Petronić, S., Polić, S. R., Čolić, K.,& Brat, Z.. (2022). Važnost ispitivanja dobošastog razmenjivača toplote nafta-nafta za potrebe održivog razvoja i zaštitu životne sredine. in Proceedings - 10th International Conference on Renewable Electrical Power Sources, Belgrade
Savez mašinskih i elektrotehničkih inženjera i tehničara Srbije (SMEITS)., 157-164.
https://hdl.handle.net/21.15107/rcub_cer_5933

Jarić M, Petronić S, Polić SR, Čolić K, Brat Z. Važnost ispitivanja dobošastog razmenjivača toplote nafta-nafta za potrebe održivog razvoja i zaštitu životne sredine. in Proceedings - 10th International Conference on Renewable Electrical Power Sources, Belgrade. 2022;:157-164.
https://hdl.handle.net/21.15107/rcub_cer_5933 .

Jarić, Marko, Petronić, Sanja, Polić, Suzana R., Čolić, Katarina, Brat, Zagorka, "Važnost ispitivanja dobošastog razmenjivača toplote nafta-nafta za potrebe održivog razvoja i zaštitu životne sredine" in Proceedings - 10th International Conference on Renewable Electrical Power Sources, Belgrade (2022):157-164,
https://hdl.handle.net/21.15107/rcub_cer_5933 .

TY  - CONF
AU  - Polić, Suzana R.
AU  - Petronić, Sanja
AU  - Stević, Zoran
AU  - Jarić, Marko
PY  - 2022
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/5932
AB  - Uporedo sa razvojem istraživanja obnovljivih izvora energije, poslednjih godina razvija se i moderna energetska paradigma u vezi sa različitim aspektima primene ovih izvora, odnosno energetske tranzicije. Filozofski aspekti odnose se na specifičnosti novih perspektiva posmatranja problema i načina rezonovanja u okviru tehnofilozofske tradicije, kao i u kontekstu savremenih okolnosti primene obnovljivih izvora energije. Heritološku dimenziju daje usmerenost na očuvanje civilizacijskih vrednosti i etičko ponašanje. U ovom radu u fokusu su heritološko-filozofske ideje prisutne u savremenoj akademskoj praksi.
AB  - Along with the development of renewable energy research, in recent years, develop and a modern energy paradigm in relation to various aspects of the application of these sources, or energy transition. Philosophical aspects relate to the specifics of new perspectives on observation of problems and ways of resonating within the technophilosophical tradition, as well as in the context of the contemporary circumstances of the using renewable sources of energy. Heritological dimension gives focus on the preservation of civilizational values and ethical behavior. In this paper, the focus is a heritological-philosophical idea present in modern academic practice.
PB  - Savez mašinskih i elektrotehničkih inženjera i tehničara Srbije (SMEITS)
PB  - Društvo za obnovljive izvore električne energije
C3  - Proceedings - 10th International Conference on Renewable Electrical Power Sources
T1  - Heritološko – filozofske ideje u istraživanju primene obnovljivih izvora energije
T1  - Heritological-philosophical Ideas in the Research of the renewable Energy Sources implementatnion
SP  - 165
EP  - 172
UR  - https://hdl.handle.net/21.15107/rcub_cer_5932
ER  - 

@conference{
author = "Polić, Suzana R. and Petronić, Sanja and Stević, Zoran and Jarić, Marko",
year = "2022",
abstract = "Uporedo sa razvojem istraživanja obnovljivih izvora energije, poslednjih godina razvija se i moderna energetska paradigma u vezi sa različitim aspektima primene ovih izvora, odnosno energetske tranzicije. Filozofski aspekti odnose se na specifičnosti novih perspektiva posmatranja problema i načina rezonovanja u okviru tehnofilozofske tradicije, kao i u kontekstu savremenih okolnosti primene obnovljivih izvora energije. Heritološku dimenziju daje usmerenost na očuvanje civilizacijskih vrednosti i etičko ponašanje. U ovom radu u fokusu su heritološko-filozofske ideje prisutne u savremenoj akademskoj praksi., Along with the development of renewable energy research, in recent years, develop and a modern energy paradigm in relation to various aspects of the application of these sources, or energy transition. Philosophical aspects relate to the specifics of new perspectives on observation of problems and ways of resonating within the technophilosophical tradition, as well as in the context of the contemporary circumstances of the using renewable sources of energy. Heritological dimension gives focus on the preservation of civilizational values and ethical behavior. In this paper, the focus is a heritological-philosophical idea present in modern academic practice.",
publisher = "Savez mašinskih i elektrotehničkih inženjera i tehničara Srbije (SMEITS), Društvo za obnovljive izvore električne energije",
journal = "Proceedings - 10th International Conference on Renewable Electrical Power Sources",
title = "Heritološko – filozofske ideje u istraživanju primene obnovljivih izvora energije, Heritological-philosophical Ideas in the Research of the renewable Energy Sources implementatnion",
pages = "165-172",
url = "https://hdl.handle.net/21.15107/rcub_cer_5932"
}

Polić, S. R., Petronić, S., Stević, Z.,& Jarić, M.. (2022). Heritološko – filozofske ideje u istraživanju primene obnovljivih izvora energije. in Proceedings - 10th International Conference on Renewable Electrical Power Sources
Savez mašinskih i elektrotehničkih inženjera i tehničara Srbije (SMEITS)., 165-172.
https://hdl.handle.net/21.15107/rcub_cer_5932

Polić SR, Petronić S, Stević Z, Jarić M. Heritološko – filozofske ideje u istraživanju primene obnovljivih izvora energije. in Proceedings - 10th International Conference on Renewable Electrical Power Sources. 2022;:165-172.
https://hdl.handle.net/21.15107/rcub_cer_5932 .

Polić, Suzana R., Petronić, Sanja, Stević, Zoran, Jarić, Marko, "Heritološko – filozofske ideje u istraživanju primene obnovljivih izvora energije" in Proceedings - 10th International Conference on Renewable Electrical Power Sources (2022):165-172,
https://hdl.handle.net/21.15107/rcub_cer_5932 .

TY  - CONF
AU  - Polić, Suzana R.
AU  - Petronić, Sanja
AU  - Stević, Zoran
AU  - Jarić, Marko
PY  - 2022
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/5931
AB  - Savremena muzejska praksa, koja u procesu muzealizacije obnovljivih izvora energije, u prvi plan ističe ideje, a potom eksponate, pogodna je za muzejsku kontekstualizaciju solarne energije. Imajući u vidu razvoj ideja o korišćenju ove vrste energije, predmet istraživanja je kolekcija Museum of Solar Energy, u kontekstu zaštite kulturnog nasleđa. U okviru razmatranja metodoloških, naučnih i obrazovnih aspekata delatnosti ovog muzeja, uz komparativnu analizu koncepta Frances Young Tang Teaching Museum, daje se projekcija mogućeg razvoja muzeja kao realnog i virtuelnog prostora za sticanje formativnog iskustva u radu sa solarnom energijom.
AB  - Contemporary Museum Practice, which in the process of musealization of renewable energy, emphasizes ideas, and then exhibits, is suitable for museum contextualization of solar energy. Given the development of ideas on using this type of energy, the subject of research is The Collection of Museum of Solar Energy, in the context of protection of cultural heritage. Within the review of the methodological, scientific and educational aspects of this museum, with a comparative analysis of the concept of Frances Young Tang Teaching Museum, we propose the possible development of the museum as a real and virtual space to acquire formative experience in working with solar energy.
PB  - Savez mašinskih i elektrotehničkih inženjera i tehničara Srbije (SMEITS)
PB  - Društvo za obnovljive izvore električne energije
C3  - Proceedings  - 10th International Conference on Renewable Electrical Power Sources, Belgrade
T1  - Savremena muzealizacija i kolekcija Muzeja solarne energije
T1  - Contemporary musealisation and Collection of Museum of Solar Energy
SP  - 69
EP  - 76
UR  - https://hdl.handle.net/21.15107/rcub_cer_5931
ER  - 

@conference{
author = "Polić, Suzana R. and Petronić, Sanja and Stević, Zoran and Jarić, Marko",
year = "2022",
abstract = "Savremena muzejska praksa, koja u procesu muzealizacije obnovljivih izvora energije, u prvi plan ističe ideje, a potom eksponate, pogodna je za muzejsku kontekstualizaciju solarne energije. Imajući u vidu razvoj ideja o korišćenju ove vrste energije, predmet istraživanja je kolekcija Museum of Solar Energy, u kontekstu zaštite kulturnog nasleđa. U okviru razmatranja metodoloških, naučnih i obrazovnih aspekata delatnosti ovog muzeja, uz komparativnu analizu koncepta Frances Young Tang Teaching Museum, daje se projekcija mogućeg razvoja muzeja kao realnog i virtuelnog prostora za sticanje formativnog iskustva u radu sa solarnom energijom., Contemporary Museum Practice, which in the process of musealization of renewable energy, emphasizes ideas, and then exhibits, is suitable for museum contextualization of solar energy. Given the development of ideas on using this type of energy, the subject of research is The Collection of Museum of Solar Energy, in the context of protection of cultural heritage. Within the review of the methodological, scientific and educational aspects of this museum, with a comparative analysis of the concept of Frances Young Tang Teaching Museum, we propose the possible development of the museum as a real and virtual space to acquire formative experience in working with solar energy.",
publisher = "Savez mašinskih i elektrotehničkih inženjera i tehničara Srbije (SMEITS), Društvo za obnovljive izvore električne energije",
journal = "Proceedings  - 10th International Conference on Renewable Electrical Power Sources, Belgrade",
title = "Savremena muzealizacija i kolekcija Muzeja solarne energije, Contemporary musealisation and Collection of Museum of Solar Energy",
pages = "69-76",
url = "https://hdl.handle.net/21.15107/rcub_cer_5931"
}

Polić, S. R., Petronić, S., Stević, Z.,& Jarić, M.. (2022). Savremena muzealizacija i kolekcija Muzeja solarne energije. in Proceedings  - 10th International Conference on Renewable Electrical Power Sources, Belgrade
Savez mašinskih i elektrotehničkih inženjera i tehničara Srbije (SMEITS)., 69-76.
https://hdl.handle.net/21.15107/rcub_cer_5931

Polić SR, Petronić S, Stević Z, Jarić M. Savremena muzealizacija i kolekcija Muzeja solarne energije. in Proceedings  - 10th International Conference on Renewable Electrical Power Sources, Belgrade. 2022;:69-76.
https://hdl.handle.net/21.15107/rcub_cer_5931 .

Polić, Suzana R., Petronić, Sanja, Stević, Zoran, Jarić, Marko, "Savremena muzealizacija i kolekcija Muzeja solarne energije" in Proceedings  - 10th International Conference on Renewable Electrical Power Sources, Belgrade (2022):69-76,
https://hdl.handle.net/21.15107/rcub_cer_5931 .

TY  - JOUR
AU  - Karastojković, Zoran
AU  - Stojiljković, Dragan
AU  - Polić, Suzana R.
PY  - 2022
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/5930
AB  - Repair of any unicate artefact always requires the challenge and however demands for high level of knowledge & experience in this field, at the same level conservation works. Those demands are regarding not only on visual appearance, it is intended to stain unchainched other properties, even to question of strength, either it is an artistic piece, also the possibility of lowering the corrosion resistance, after the repair works have done. Here in details are analysed possible solutions for repairing of one broken arm when an unicate lamp unintentionaly is damaged. The used bulk material of the lamp is not available for using a kind of welding or soldering procedures, firstly that those methods will markably change the surface properties of the repaired zone. So, the repairing is provided by combining two methods: reinforcing with semi-hard aluminum wire and two component glue.
AB  - Reparacija nekog unikatnog dela uvek predstavlja izazov i zahteva puno stručnosti i umeća konzervacije. Zahtevi se odnose na vizuelni izgled, koji što više treba da ostane neizmenjen, pa do pitanja čvrstoće kao i mogućeg odvijanja korozije nakon izvođenja svih planiranih reparaturnih radova. Ovde se analiziraju mogući postupci reparacije jedne polomljene ruke na unikatnoj stonoj lampi i detaljno je opisano izvođenje reparacije kombinovanjem armiranja aluminijumskom žicom i dvokomponentnim lepkom.
PB  - Beograd : Inženjersko društvo za koroziju
T2  - Zaštita Materijala
T1  - Choosing the procedure for repair of damaged arm at an unicate desk lamp
T1  - Izbor postupka reparacije polomljene ruke jedne unikatne stolne lampe
VL  - 63
IS  - 4
SP  - 381
EP  - 385
DO  - 10.5937/zasmat2204381K
ER  - 

@article{
author = "Karastojković, Zoran and Stojiljković, Dragan and Polić, Suzana R.",
year = "2022",
abstract = "Repair of any unicate artefact always requires the challenge and however demands for high level of knowledge & experience in this field, at the same level conservation works. Those demands are regarding not only on visual appearance, it is intended to stain unchainched other properties, even to question of strength, either it is an artistic piece, also the possibility of lowering the corrosion resistance, after the repair works have done. Here in details are analysed possible solutions for repairing of one broken arm when an unicate lamp unintentionaly is damaged. The used bulk material of the lamp is not available for using a kind of welding or soldering procedures, firstly that those methods will markably change the surface properties of the repaired zone. So, the repairing is provided by combining two methods: reinforcing with semi-hard aluminum wire and two component glue., Reparacija nekog unikatnog dela uvek predstavlja izazov i zahteva puno stručnosti i umeća konzervacije. Zahtevi se odnose na vizuelni izgled, koji što više treba da ostane neizmenjen, pa do pitanja čvrstoće kao i mogućeg odvijanja korozije nakon izvođenja svih planiranih reparaturnih radova. Ovde se analiziraju mogući postupci reparacije jedne polomljene ruke na unikatnoj stonoj lampi i detaljno je opisano izvođenje reparacije kombinovanjem armiranja aluminijumskom žicom i dvokomponentnim lepkom.",
publisher = "Beograd : Inženjersko društvo za koroziju",
journal = "Zaštita Materijala",
title = "Choosing the procedure for repair of damaged arm at an unicate desk lamp, Izbor postupka reparacije polomljene ruke jedne unikatne stolne lampe",
volume = "63",
number = "4",
pages = "381-385",
doi = "10.5937/zasmat2204381K"
}

Karastojković, Z., Stojiljković, D.,& Polić, S. R.. (2022). Choosing the procedure for repair of damaged arm at an unicate desk lamp. in Zaštita Materijala
Beograd : Inženjersko društvo za koroziju., 63(4), 381-385.
https://doi.org/10.5937/zasmat2204381K

Karastojković Z, Stojiljković D, Polić SR. Choosing the procedure for repair of damaged arm at an unicate desk lamp. in Zaštita Materijala. 2022;63(4):381-385.
doi:10.5937/zasmat2204381K .

Karastojković, Zoran, Stojiljković, Dragan, Polić, Suzana R., "Choosing the procedure for repair of damaged arm at an unicate desk lamp" in Zaštita Materijala, 63, no. 4 (2022):381-385,
https://doi.org/10.5937/zasmat2204381K . .

TY  - JOUR
AU  - Ristić, Slavica
AU  - Polić, Suzana R.
AU  - Radojković, Bojana
PY  - 2022
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/5450
AB  - Женска огрлица, филигран са непожељном патином, чишћена је Nd:YAG  ласером. Током експеримента варирани су параметри ласера: таласна дужина, флуенца и број импулса, односно време озрачавања. Испитиван је утицај наведених фактора на ефикасност ласерског чишћења патине. Састав материјала огрлице је одређен XRF методом. Морфолошке промене на површини огрлице су испитиване оптичком микроскопијом. Резултати испитивања су показали да је најефикасније чишћење постигнуто када је примењена таласна дужина ласера од 1064 nm. Утврђено је да за наведени предмет и при примени оптималне таласне дужине, већи утицај на ефикасност ласерског чишћења има избор флуенце, а мањи утицај број ласерских импулса.
AB  - Women's necklace-filigree with patina, of unknown age, owned by a private collection was cleaned with a Nd:YAG laser. Laser parameters were varied during the experiment; wavelength, fluence and number of pulses, ie irradiation time. The influence of the mentioned factors on the efficiency of laser cleaning of the patina was investigated. The ablation results were examined by optical microscopy. The test results showed that the most efficient cleaning is with λ = 1064 nm. The choice of fluence has the greatest influence on the efficiency of laser cleaning, for the mentioned subject, and the influence of the number of laser pulses has a smaller influence.
PB  - Савез Инжењера и техничара Србије, Београд
T2  - Tehnika - Novi materijali
T1  - Lasersko čišćenje nepoželjne patine nakita
T1  - Laser cleaning of unwanted jewelry patina
VL  - 31
IS  - 3
SP  - 287
EP  - 292
DO  - 10.5937/tehnika2203287R
ER  - 

@article{
author = "Ristić, Slavica and Polić, Suzana R. and Radojković, Bojana",
year = "2022",
abstract = "Женска огрлица, филигран са непожељном патином, чишћена је Nd:YAG  ласером. Током експеримента варирани су параметри ласера: таласна дужина, флуенца и број импулса, односно време озрачавања. Испитиван је утицај наведених фактора на ефикасност ласерског чишћења патине. Састав материјала огрлице је одређен XRF методом. Морфолошке промене на површини огрлице су испитиване оптичком микроскопијом. Резултати испитивања су показали да је најефикасније чишћење постигнуто када је примењена таласна дужина ласера од 1064 nm. Утврђено је да за наведени предмет и при примени оптималне таласне дужине, већи утицај на ефикасност ласерског чишћења има избор флуенце, а мањи утицај број ласерских импулса., Women's necklace-filigree with patina, of unknown age, owned by a private collection was cleaned with a Nd:YAG laser. Laser parameters were varied during the experiment; wavelength, fluence and number of pulses, ie irradiation time. The influence of the mentioned factors on the efficiency of laser cleaning of the patina was investigated. The ablation results were examined by optical microscopy. The test results showed that the most efficient cleaning is with λ = 1064 nm. The choice of fluence has the greatest influence on the efficiency of laser cleaning, for the mentioned subject, and the influence of the number of laser pulses has a smaller influence.",
publisher = "Савез Инжењера и техничара Србије, Београд",
journal = "Tehnika - Novi materijali",
title = "Lasersko čišćenje nepoželjne patine nakita, Laser cleaning of unwanted jewelry patina",
volume = "31",
number = "3",
pages = "287-292",
doi = "10.5937/tehnika2203287R"
}

Ristić, S., Polić, S. R.,& Radojković, B.. (2022). Lasersko čišćenje nepoželjne patine nakita. in Tehnika - Novi materijali
Савез Инжењера и техничара Србије, Београд., 31(3), 287-292.
https://doi.org/10.5937/tehnika2203287R

Ristić S, Polić SR, Radojković B. Lasersko čišćenje nepoželjne patine nakita. in Tehnika - Novi materijali. 2022;31(3):287-292.
doi:10.5937/tehnika2203287R .

Ristić, Slavica, Polić, Suzana R., Radojković, Bojana, "Lasersko čišćenje nepoželjne patine nakita" in Tehnika - Novi materijali, 31, no. 3 (2022):287-292,
https://doi.org/10.5937/tehnika2203287R . .

TY  - CONF
AU  - Milosavljević, Anđelka
AU  - Polić, Suzana R.
AU  - Petronić, Sanja
AU  - Jarić, Marko
PY  - 2021
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/6217
AB  - Hermeneutički i politehnički pogledi na tehnološki oblikovanu egzistenciju savremenog čoveka, ukrštaju se u politehničkom muzejskom okruženju, na planu simboličke sublimacije. U ovom radu, predmet istraživanja su operativno-tehnički aspekti prezentacije konceptualnih pozicija u stvaranju muzejskih predstava politehničnosti, a u kojima je centralno pitanje konceptualna primena u vizuelnoj predstavi mašinskih delova ili elemenata, pa i mašina u celini. Prikazane su dve studije sa Interneta, koje karakterišu različite tehnološke pristupe u materijalizaciji politehničkog promišljanja o tehnološkom univerzumu naše civilizacije.
AB  - Hermeneutic and polytechnic views on the technologically shaped existence of modern man intersect in the polytechnic museum environment, in termms of symbolic sublimation. In this paper, the subject of research  are operational and technical aspects of the presentation of conceptual positions in the creation of museum presentations of polytechnic, in which the central issue is the conceptual application in the visual presentation of machine parts or elements, and machines as a whole. Two studies from the Polytechnic museum in Moscow are presented, which characterize different technological approaches in the materialization of polytechnic thinking about the technological universe of our civilization.
PB  - Beograd: Savez mašinskih i elektrotehičkih inženjera i tehničara Srbije (SMEITS) = Belgrade:Union of Mechanical and Electrical Engineers and Technicians of Serbia
C3  - Proceedings - 9th International Conference on Renewable Electrical Power Sources, October 15, 2021, Belgrade
T1  - Hermeneutika i vizuelna predstava politehničkog promišljanja – dve studije iz Politehničkog muzeja u Moskvi
T1  - Hermeneutics and visual performance of polytechnical thinking – two studies from the Polytechnical Museum in Moscow
SP  - 291
EP  - 298
UR  - https://hdl.handle.net/21.15107/rcub_cer_6217
ER  - 

@conference{
author = "Milosavljević, Anđelka and Polić, Suzana R. and Petronić, Sanja and Jarić, Marko",
year = "2021",
abstract = "Hermeneutički i politehnički pogledi na tehnološki oblikovanu egzistenciju savremenog čoveka, ukrštaju se u politehničkom muzejskom okruženju, na planu simboličke sublimacije. U ovom radu, predmet istraživanja su operativno-tehnički aspekti prezentacije konceptualnih pozicija u stvaranju muzejskih predstava politehničnosti, a u kojima je centralno pitanje konceptualna primena u vizuelnoj predstavi mašinskih delova ili elemenata, pa i mašina u celini. Prikazane su dve studije sa Interneta, koje karakterišu različite tehnološke pristupe u materijalizaciji politehničkog promišljanja o tehnološkom univerzumu naše civilizacije., Hermeneutic and polytechnic views on the technologically shaped existence of modern man intersect in the polytechnic museum environment, in termms of symbolic sublimation. In this paper, the subject of research  are operational and technical aspects of the presentation of conceptual positions in the creation of museum presentations of polytechnic, in which the central issue is the conceptual application in the visual presentation of machine parts or elements, and machines as a whole. Two studies from the Polytechnic museum in Moscow are presented, which characterize different technological approaches in the materialization of polytechnic thinking about the technological universe of our civilization.",
publisher = "Beograd: Savez mašinskih i elektrotehičkih inženjera i tehničara Srbije (SMEITS) = Belgrade:Union of Mechanical and Electrical Engineers and Technicians of Serbia",
journal = "Proceedings - 9th International Conference on Renewable Electrical Power Sources, October 15, 2021, Belgrade",
title = "Hermeneutika i vizuelna predstava politehničkog promišljanja – dve studije iz Politehničkog muzeja u Moskvi, Hermeneutics and visual performance of polytechnical thinking – two studies from the Polytechnical Museum in Moscow",
pages = "291-298",
url = "https://hdl.handle.net/21.15107/rcub_cer_6217"
}

Milosavljević, A., Polić, S. R., Petronić, S.,& Jarić, M.. (2021). Hermeneutika i vizuelna predstava politehničkog promišljanja – dve studije iz Politehničkog muzeja u Moskvi. in Proceedings - 9th International Conference on Renewable Electrical Power Sources, October 15, 2021, Belgrade
Beograd: Savez mašinskih i elektrotehičkih inženjera i tehničara Srbije (SMEITS) = Belgrade:Union of Mechanical and Electrical Engineers and Technicians of Serbia., 291-298.
https://hdl.handle.net/21.15107/rcub_cer_6217

Milosavljević A, Polić SR, Petronić S, Jarić M. Hermeneutika i vizuelna predstava politehničkog promišljanja – dve studije iz Politehničkog muzeja u Moskvi. in Proceedings - 9th International Conference on Renewable Electrical Power Sources, October 15, 2021, Belgrade. 2021;:291-298.
https://hdl.handle.net/21.15107/rcub_cer_6217 .

Milosavljević, Anđelka, Polić, Suzana R., Petronić, Sanja, Jarić, Marko, "Hermeneutika i vizuelna predstava politehničkog promišljanja – dve studije iz Politehničkog muzeja u Moskvi" in Proceedings - 9th International Conference on Renewable Electrical Power Sources, October 15, 2021, Belgrade (2021):291-298,
https://hdl.handle.net/21.15107/rcub_cer_6217 .

TY  - CONF
AU  - Jarić, Marko
AU  - Petronić, Sanja
AU  - Marković, Saša
AU  - Trninić, Marta
AU  - Polić, Suzana R.
PY  - 2021
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/6218
AB  - Naftna platforma je velika građevina sa objektima za bušenje bušotina za istraživanje, vađenje, skladištenje i preradu nafte i prirodnog gasa koji leži u stenovitim formacijama ispod morskog dna. Bušenje na otvorenom moru predstavlja izazove za životnu sredinu. Iako, srećom, nije bilo mnogo nesreća na naftnim platformama, šteta koja nastane je ogromna i u ljudskom i u materijalnom i u smislu zaštite životne sredine. Iz tog razloga, inspekcija opreme pod pritiskom je od velikog značaja. Posude pod pritiskom mogu biti pod rizikom od degradacije materijala. Jedan od tipičnih mehanizama degradacije materijala je korozija. U ovom radu će biti prikazana važnost inspekcije opreme pod pritiskom. Na konkretnom, praktičnom primeru će biti predstavljena inspekcija cevovoda i određivanje brzine korozije i preostalog veka trajanja u cilju sprečavanja otkaza i materijalnih I ljudskih gubitaka.
AB  - The oil platform is a large structure with facilities for drilling wells for exploration, extraction, storage and refining of oil and natural gas lying in rock formations under the seabed. Offshore drilling poses environmental challenges. Although, fortunately, there have not been many accidents on oil platforms, the damage that occurs is enormous, both in human and material terms, and in terms of environmental protection. For that reason, the inspection of pressure equipment is of great importance. The risk to the pipeline in service can be failure due to material degradation. One of the typical mechanisms of material degradation is corrosion. This paper will present the importance of inspection of pressure equipment. On a concrete, practical example, pipeline inspection and determination of corrosion rate and remaining life will be presented in order to prevent failures and material and human losses.
PB  - Beograd: Savez mašinskih i elektrotehičkih inženjera i tehničara Srbije (SMEITS) = Belgrade:Union of Mechanical and Electrical Engineers and Technicians of Serbia
C3  - Proceedings - 9th International Conference on Renewable Electrical Power Sources, October 15, 2021, Belgrade
T1  - Važnost pregleda i određivanje preostalog veka trajanja cevovoda na naftnoj platformi
T1  - Importance of inspection and determination of remaining life of pipline in oil platform
SP  - 299
EP  - 304
UR  - https://hdl.handle.net/21.15107/rcub_cer_6218
ER  - 

@conference{
author = "Jarić, Marko and Petronić, Sanja and Marković, Saša and Trninić, Marta and Polić, Suzana R.",
year = "2021",
abstract = "Naftna platforma je velika građevina sa objektima za bušenje bušotina za istraživanje, vađenje, skladištenje i preradu nafte i prirodnog gasa koji leži u stenovitim formacijama ispod morskog dna. Bušenje na otvorenom moru predstavlja izazove za životnu sredinu. Iako, srećom, nije bilo mnogo nesreća na naftnim platformama, šteta koja nastane je ogromna i u ljudskom i u materijalnom i u smislu zaštite životne sredine. Iz tog razloga, inspekcija opreme pod pritiskom je od velikog značaja. Posude pod pritiskom mogu biti pod rizikom od degradacije materijala. Jedan od tipičnih mehanizama degradacije materijala je korozija. U ovom radu će biti prikazana važnost inspekcije opreme pod pritiskom. Na konkretnom, praktičnom primeru će biti predstavljena inspekcija cevovoda i određivanje brzine korozije i preostalog veka trajanja u cilju sprečavanja otkaza i materijalnih I ljudskih gubitaka., The oil platform is a large structure with facilities for drilling wells for exploration, extraction, storage and refining of oil and natural gas lying in rock formations under the seabed. Offshore drilling poses environmental challenges. Although, fortunately, there have not been many accidents on oil platforms, the damage that occurs is enormous, both in human and material terms, and in terms of environmental protection. For that reason, the inspection of pressure equipment is of great importance. The risk to the pipeline in service can be failure due to material degradation. One of the typical mechanisms of material degradation is corrosion. This paper will present the importance of inspection of pressure equipment. On a concrete, practical example, pipeline inspection and determination of corrosion rate and remaining life will be presented in order to prevent failures and material and human losses.",
publisher = "Beograd: Savez mašinskih i elektrotehičkih inženjera i tehničara Srbije (SMEITS) = Belgrade:Union of Mechanical and Electrical Engineers and Technicians of Serbia",
journal = "Proceedings - 9th International Conference on Renewable Electrical Power Sources, October 15, 2021, Belgrade",
title = "Važnost pregleda i određivanje preostalog veka trajanja cevovoda na naftnoj platformi, Importance of inspection and determination of remaining life of pipline in oil platform",
pages = "299-304",
url = "https://hdl.handle.net/21.15107/rcub_cer_6218"
}

Jarić, M., Petronić, S., Marković, S., Trninić, M.,& Polić, S. R.. (2021). Važnost pregleda i određivanje preostalog veka trajanja cevovoda na naftnoj platformi. in Proceedings - 9th International Conference on Renewable Electrical Power Sources, October 15, 2021, Belgrade
Beograd: Savez mašinskih i elektrotehičkih inženjera i tehničara Srbije (SMEITS) = Belgrade:Union of Mechanical and Electrical Engineers and Technicians of Serbia., 299-304.
https://hdl.handle.net/21.15107/rcub_cer_6218

Jarić M, Petronić S, Marković S, Trninić M, Polić SR. Važnost pregleda i određivanje preostalog veka trajanja cevovoda na naftnoj platformi. in Proceedings - 9th International Conference on Renewable Electrical Power Sources, October 15, 2021, Belgrade. 2021;:299-304.
https://hdl.handle.net/21.15107/rcub_cer_6218 .

Jarić, Marko, Petronić, Sanja, Marković, Saša, Trninić, Marta, Polić, Suzana R., "Važnost pregleda i određivanje preostalog veka trajanja cevovoda na naftnoj platformi" in Proceedings - 9th International Conference on Renewable Electrical Power Sources, October 15, 2021, Belgrade (2021):299-304,
https://hdl.handle.net/21.15107/rcub_cer_6218 .

TY  - CONF
AU  - Polić, Suzana R.
AU  - Stević, Zoran
AU  - Ristić, Slavica
AU  - Radojković, Bojana
PY  - 2021
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/5467
AB  - Феномени лиминалности прате ласерско чишћење историјског папира, од фазе планирања поступка, до завршетка његовог извођењ. Реч је о појавама различитог порекла и начина испољавања, које могу бити доминантне или мање експониране, а свакако једнако значајне за целовитост и квалитет изведеног поступка. У овом раду фокус истраживања је проблематизацији лиминалности, као и артикулација и трансформабилност. Задати референтни оквир представља један од могућих скупова феномена који се у оквиру ласерског чишћења могу сагледавати и у ширим контекстима.
PB  - Београд: Академија техничких струковних студија
C3  - Зборник радова - Шести научно-стручни скуп ПОЛИТЕХНИКА, 10/12/2021, Београд
T1  - Истраживање лиминалних феномена у ласерском чишћењу историјског папира
VL  - 6
SP  - 613
EP  - 618
UR  - https://hdl.handle.net/21.15107/rcub_cer_5467
ER  - 

@conference{
author = "Polić, Suzana R. and Stević, Zoran and Ristić, Slavica and Radojković, Bojana",
year = "2021",
abstract = "Феномени лиминалности прате ласерско чишћење историјског папира, од фазе планирања поступка, до завршетка његовог извођењ. Реч је о појавама различитог порекла и начина испољавања, које могу бити доминантне или мање експониране, а свакако једнако значајне за целовитост и квалитет изведеног поступка. У овом раду фокус истраживања је проблематизацији лиминалности, као и артикулација и трансформабилност. Задати референтни оквир представља један од могућих скупова феномена који се у оквиру ласерског чишћења могу сагледавати и у ширим контекстима.",
publisher = "Београд: Академија техничких струковних студија",
journal = "Зборник радова - Шести научно-стручни скуп ПОЛИТЕХНИКА, 10/12/2021, Београд",
title = "Истраживање лиминалних феномена у ласерском чишћењу историјског папира",
volume = "6",
pages = "613-618",
url = "https://hdl.handle.net/21.15107/rcub_cer_5467"
}

Polić, S. R., Stević, Z., Ristić, S.,& Radojković, B.. (2021). Истраживање лиминалних феномена у ласерском чишћењу историјског папира. in Зборник радова - Шести научно-стручни скуп ПОЛИТЕХНИКА, 10/12/2021, Београд
Београд: Академија техничких струковних студија., 6, 613-618.
https://hdl.handle.net/21.15107/rcub_cer_5467

Polić SR, Stević Z, Ristić S, Radojković B. Истраживање лиминалних феномена у ласерском чишћењу историјског папира. in Зборник радова - Шести научно-стручни скуп ПОЛИТЕХНИКА, 10/12/2021, Београд. 2021;6:613-618.
https://hdl.handle.net/21.15107/rcub_cer_5467 .

Polić, Suzana R., Stević, Zoran, Ristić, Slavica, Radojković, Bojana, "Истраживање лиминалних феномена у ласерском чишћењу историјског папира" in Зборник радова - Шести научно-стручни скуп ПОЛИТЕХНИКА, 10/12/2021, Београд, 6 (2021):613-618,
https://hdl.handle.net/21.15107/rcub_cer_5467 .

TY  - CONF
AU  - Polić, Suzana R.
AU  - Stević, Zoran
AU  - Ristić, Slavica
AU  - Radojković, Bojana
PY  - 2021
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/5466
AB  - Хеуристичке процене дају пресудни допринос у заштити културног наслеђа, због специфичности предмета истраживања, који, по правилу, захтева ограничено узорковање, као и недеструктивно деловање на материјал. За неопходну високу деликатност у интерпретацији експерименталних резултата, хеуристичка процена са својим кумулативним ефектима, који су посебно значајни у верификацији резултата, својеврсни је оператор неинструменталног моделовања процеса ласерског чишћења, којим се у задатој временској ограничености омогућава темпорална екстензија у домену евалуације. У овом раду, у фокусу је научно питање концептуализације хеуристичке процене у ласерском чишћењу папира, која, када се има у виду фрагилност материјала и изразита вулнерабилност, има посебно специфичан значај.
PB  - Београд: Академија техничких струковних студија
C3  - Зборник радова - Шести научно-стручни скуп ПОЛИТЕХНИКА, 10/12/2021, Београд
T1  - Концептуализација хеуристичне процене у ласерском чишћењу папира
VL  - 6
SP  - 607
EP  - 612
UR  - https://hdl.handle.net/21.15107/rcub_cer_5466
ER  - 

@conference{
author = "Polić, Suzana R. and Stević, Zoran and Ristić, Slavica and Radojković, Bojana",
year = "2021",
abstract = "Хеуристичке процене дају пресудни допринос у заштити културног наслеђа, због специфичности предмета истраживања, који, по правилу, захтева ограничено узорковање, као и недеструктивно деловање на материјал. За неопходну високу деликатност у интерпретацији експерименталних резултата, хеуристичка процена са својим кумулативним ефектима, који су посебно значајни у верификацији резултата, својеврсни је оператор неинструменталног моделовања процеса ласерског чишћења, којим се у задатој временској ограничености омогућава темпорална екстензија у домену евалуације. У овом раду, у фокусу је научно питање концептуализације хеуристичке процене у ласерском чишћењу папира, која, када се има у виду фрагилност материјала и изразита вулнерабилност, има посебно специфичан значај.",
publisher = "Београд: Академија техничких струковних студија",
journal = "Зборник радова - Шести научно-стручни скуп ПОЛИТЕХНИКА, 10/12/2021, Београд",
title = "Концептуализација хеуристичне процене у ласерском чишћењу папира",
volume = "6",
pages = "607-612",
url = "https://hdl.handle.net/21.15107/rcub_cer_5466"
}

Polić, S. R., Stević, Z., Ristić, S.,& Radojković, B.. (2021). Концептуализација хеуристичне процене у ласерском чишћењу папира. in Зборник радова - Шести научно-стручни скуп ПОЛИТЕХНИКА, 10/12/2021, Београд
Београд: Академија техничких струковних студија., 6, 607-612.
https://hdl.handle.net/21.15107/rcub_cer_5466

Polić SR, Stević Z, Ristić S, Radojković B. Концептуализација хеуристичне процене у ласерском чишћењу папира. in Зборник радова - Шести научно-стручни скуп ПОЛИТЕХНИКА, 10/12/2021, Београд. 2021;6:607-612.
https://hdl.handle.net/21.15107/rcub_cer_5466 .

Polić, Suzana R., Stević, Zoran, Ristić, Slavica, Radojković, Bojana, "Концептуализација хеуристичне процене у ласерском чишћењу папира" in Зборник радова - Шести научно-стручни скуп ПОЛИТЕХНИКА, 10/12/2021, Београд, 6 (2021):607-612,
https://hdl.handle.net/21.15107/rcub_cer_5466 .

TY  - JOUR
AU  - Linić, Suzana
AU  - Lučanin, Vojkan J.
AU  - Živković, Srđan P.
AU  - Raković, Marko
AU  - Ristić, Slavica S.
AU  - Radojković, Bojana
AU  - Polić, Suzana R.
PY  - 2021
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/4240
AB  - A multidisciplinary research method was employed with the intention to create a series of bio-inspired flattened airfoils, observe their aerodynamic characteristics, and analyse their applicability to small devices or to designs of high-speed trains, within the shortest period in the conceptual stage. A research specimen of a kingfisher, selected for biomimicry, was examined with the following methods: visual inspection, analysis of photographs, manufacturing quality control measurement with a 3D laser scanner, and microscopy. A basic multi-arc-line profile, re-engineered from the overlapped specimen shape data and based on the observations, was used for designing a series of seven derived airfoils. The aerodynamic characteristics of the bio-inspired airfoils were obtained with the panel methods at low and moderate subsonic speeds, while the small transonic difference method was used in the high-subsonic speed range. Basic and ellipse-like airfoils produce higher total drag at low and moderate velocities and higher forebody drag in the high-subsonic range when compared to derived and parabola-like airfoils. The obtained critical Mach numbers are in the range from 0.76 to 0.78, where three bionic airfoils show values equal to or smaller than the values of ellipse- and parabola-like airfoils. The profile with the shortest bio-inspired relative chord has a higher critical Mach number value than the parabola-like profile. The sonic lines above these profiles appear at close positions. The applied set of examination methods of the bio-inspired design is not time consuming and produces sufficiently good results in the conceptual stage. Therefore, a further development of unique and adjusted numerical methods and codes at pre-computational fluid dynamics run is encouraged, together with shape parameterization.
PB  - Springer Nature Switzerland AG 2020
T2  - Journal of the Brazilian Society of Mechanical Sciences and Engineering
T1  - Multidisciplinary research method for designing and selection of bio-inspired profiles in the conceptual designing stage
VL  - 43
IS  - 1
SP  - 57
DO  - 10.1007/s40430-020-02789-2
ER  - 

@article{
author = "Linić, Suzana and Lučanin, Vojkan J. and Živković, Srđan P. and Raković, Marko and Ristić, Slavica S. and Radojković, Bojana and Polić, Suzana R.",
year = "2021",
abstract = "A multidisciplinary research method was employed with the intention to create a series of bio-inspired flattened airfoils, observe their aerodynamic characteristics, and analyse their applicability to small devices or to designs of high-speed trains, within the shortest period in the conceptual stage. A research specimen of a kingfisher, selected for biomimicry, was examined with the following methods: visual inspection, analysis of photographs, manufacturing quality control measurement with a 3D laser scanner, and microscopy. A basic multi-arc-line profile, re-engineered from the overlapped specimen shape data and based on the observations, was used for designing a series of seven derived airfoils. The aerodynamic characteristics of the bio-inspired airfoils were obtained with the panel methods at low and moderate subsonic speeds, while the small transonic difference method was used in the high-subsonic speed range. Basic and ellipse-like airfoils produce higher total drag at low and moderate velocities and higher forebody drag in the high-subsonic range when compared to derived and parabola-like airfoils. The obtained critical Mach numbers are in the range from 0.76 to 0.78, where three bionic airfoils show values equal to or smaller than the values of ellipse- and parabola-like airfoils. The profile with the shortest bio-inspired relative chord has a higher critical Mach number value than the parabola-like profile. The sonic lines above these profiles appear at close positions. The applied set of examination methods of the bio-inspired design is not time consuming and produces sufficiently good results in the conceptual stage. Therefore, a further development of unique and adjusted numerical methods and codes at pre-computational fluid dynamics run is encouraged, together with shape parameterization.",
publisher = "Springer Nature Switzerland AG 2020",
journal = "Journal of the Brazilian Society of Mechanical Sciences and Engineering",
title = "Multidisciplinary research method for designing and selection of bio-inspired profiles in the conceptual designing stage",
volume = "43",
number = "1",
pages = "57",
doi = "10.1007/s40430-020-02789-2"
}

Linić, S., Lučanin, V. J., Živković, S. P., Raković, M., Ristić, S. S., Radojković, B.,& Polić, S. R.. (2021). Multidisciplinary research method for designing and selection of bio-inspired profiles in the conceptual designing stage. in Journal of the Brazilian Society of Mechanical Sciences and Engineering
Springer Nature Switzerland AG 2020., 43(1), 57.
https://doi.org/10.1007/s40430-020-02789-2

Linić S, Lučanin VJ, Živković SP, Raković M, Ristić SS, Radojković B, Polić SR. Multidisciplinary research method for designing and selection of bio-inspired profiles in the conceptual designing stage. in Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2021;43(1):57.
doi:10.1007/s40430-020-02789-2 .

Linić, Suzana, Lučanin, Vojkan J., Živković, Srđan P., Raković, Marko, Ristić, Slavica S., Radojković, Bojana, Polić, Suzana R., "Multidisciplinary research method for designing and selection of bio-inspired profiles in the conceptual designing stage" in Journal of the Brazilian Society of Mechanical Sciences and Engineering, 43, no. 1 (2021):57,
https://doi.org/10.1007/s40430-020-02789-2 . .

TY  - JOUR
AU  - Knežević, Dragan
AU  - Radojković, Bojana
AU  - Ristić, Slavica
AU  - Polić, Suzana R.
AU  - Janićijević, Milovan
AU  - Tomić, Ljubiša
AU  - Jegdić, Bore
PY  - 2021
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/3978
AB  - Temperature  distribution  induced  by  laser  radiation  is  a  very  important 
parameter for an efficient and safe application of lasers in different ceramic 
processing  techniques.  This  paper  presents  the  results  of  an  infrared 
thermography (IRT) application for monitoring temperature distribution on 
a ceramic surface during Nd: YAG laser irradiation with different fluences 
and 8ns pulse duration. FLIR, E40 and SC7200 IR cameras were used with 
the  aim  of  recording  the  maximum  temperature  in  the  irradiated  zones.  It 
was  expected  that  IRT  could  give  some  information  related  to  the  heat 
affected zone and possible damage to the base material; however, the results 
have  shown  that  IR  cameras,  even  those  with  high  performance  such  as 
SC7200,  cannot  record  the  maximum  temperature  value  at  the  moment  of 
laser  operation,  but  only  the  average  temperature  of  the  bulk  sample 
material  after  laser  pulses.  The  results  of  the  numerical  simulation  have 
confirmed the value of the thermographic measurements. The microstructure 
and  micromorphology  of  the  ceramic  surface  before  and  after  the  laser 
treatment  were  analysed  by  optical  and  scanning  electron  microscopy  as 
well  as  by  examining  the  roughness  of  the  irradiated  and  non-  irradiated 
surfaces,  while  the  micromechanical  changes  were  analysed  by  comparing 
the micro-hardness of the irradiated and non-exposed surfaces.
PB  - Vinča Institute of Nuclear Sciences, Belgrade
T2  - Thermal Science
T1  - Monitoring of a ceramic surface temperature field induced by pulsed Nd: YAG laser
VL  - 25
IS  - 1B
SP  - 567
EP  - 578
DO  - 10.2298/TSCI190811425K
ER  - 

@article{
author = "Knežević, Dragan and Radojković, Bojana and Ristić, Slavica and Polić, Suzana R. and Janićijević, Milovan and Tomić, Ljubiša and Jegdić, Bore",
year = "2021",
abstract = "Temperature  distribution  induced  by  laser  radiation  is  a  very  important 
parameter for an efficient and safe application of lasers in different ceramic 
processing  techniques.  This  paper  presents  the  results  of  an  infrared 
thermography (IRT) application for monitoring temperature distribution on 
a ceramic surface during Nd: YAG laser irradiation with different fluences 
and 8ns pulse duration. FLIR, E40 and SC7200 IR cameras were used with 
the  aim  of  recording  the  maximum  temperature  in  the  irradiated  zones.  It 
was  expected  that  IRT  could  give  some  information  related  to  the  heat 
affected zone and possible damage to the base material; however, the results 
have  shown  that  IR  cameras,  even  those  with  high  performance  such  as 
SC7200,  cannot  record  the  maximum  temperature  value  at  the  moment  of 
laser  operation,  but  only  the  average  temperature  of  the  bulk  sample 
material  after  laser  pulses.  The  results  of  the  numerical  simulation  have 
confirmed the value of the thermographic measurements. The microstructure 
and  micromorphology  of  the  ceramic  surface  before  and  after  the  laser 
treatment  were  analysed  by  optical  and  scanning  electron  microscopy  as 
well  as  by  examining  the  roughness  of  the  irradiated  and  non-  irradiated 
surfaces,  while  the  micromechanical  changes  were  analysed  by  comparing 
the micro-hardness of the irradiated and non-exposed surfaces.",
publisher = "Vinča Institute of Nuclear Sciences, Belgrade",
journal = "Thermal Science",
title = "Monitoring of a ceramic surface temperature field induced by pulsed Nd: YAG laser",
volume = "25",
number = "1B",
pages = "567-578",
doi = "10.2298/TSCI190811425K"
}

Knežević, D., Radojković, B., Ristić, S., Polić, S. R., Janićijević, M., Tomić, L.,& Jegdić, B.. (2021). Monitoring of a ceramic surface temperature field induced by pulsed Nd: YAG laser. in Thermal Science
Vinča Institute of Nuclear Sciences, Belgrade., 25(1B), 567-578.
https://doi.org/10.2298/TSCI190811425K

Knežević D, Radojković B, Ristić S, Polić SR, Janićijević M, Tomić L, Jegdić B. Monitoring of a ceramic surface temperature field induced by pulsed Nd: YAG laser. in Thermal Science. 2021;25(1B):567-578.
doi:10.2298/TSCI190811425K .

Knežević, Dragan, Radojković, Bojana, Ristić, Slavica, Polić, Suzana R., Janićijević, Milovan, Tomić, Ljubiša, Jegdić, Bore, "Monitoring of a ceramic surface temperature field induced by pulsed Nd: YAG laser" in Thermal Science, 25, no. 1B (2021):567-578,
https://doi.org/10.2298/TSCI190811425K . .

TY  - CONF
AU  - Polić, Suzana R.
AU  - Milosavljević, Anđelka
AU  - Petronić, Sanja
PY  - 2021
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/7376
AB  - Fenomen obrazovnog politehničkog koncepta VKhUTEMAS (Высшие государственные художественно-технические мастерские), koji je izgrađivan i realizovan tridesetih godina XX veka u Moskvi, savremeni teoretičari povezuju sa metodologijom stvaranja avangarde, ne samo u umetnosti i industrijskom dizajnu, već i u domenu mišljenja o problemima obrazovanja i eksperimentalnim nastavnim metodama. Takođe su značajni i programski sadržaji koji se odnose na domene proizvodnje, odnosno tehnologije materijala, posebno obrade metala. U ovom radu, iz politehničke vizure, koja je bila zastupljena posebno u bazičnom, propedeutičkom delu ovog obrazovnog koncepta, istražuje se pitanje predmetnosti zaštite kulturnog nasleđa VKhUTEMAS, na primeru studije slučaja kolekcije koja se danas nalazi u The Getty Research Institute u Los Anđelesu, pod nazivom „VKhUTEMAS Collection, 1920-1929“.
AB  - Phenomenon of the educational polytechnic concept of VKhUTEMAS (Высшие
государственные художественно-технические мастерские), which was built and implemented in the 1930s in Moscow, modern theorists connect with the methodology of creating avant-garde, not only in art and industrial design, already in the domain of opinions on education and experimental teaching methods. Also, significant are programs facilities relating to the domain of production, i.e. technology of materials, especially metal processing. In this paper from the polytechnic point of view, which was represented especially in the basic, propeductile part of this educational concept, the question of the subject matter of protection of the cultural heritage of Vkhutemas is investigated, on the example of the Study of Collection, which is located in the Getty Research Institute in Los Angeles, entitled "Vkhutemas Collection, 1920-1929".
PB  - Beograd: Akademija tehničkih strukovnih studija (ATSS)
C3  - Zbornik radova, 6. naučno-stručni skup POLITEHNIKA, Beograd, 10. decembar 2021.
T1  - Avangarda, politehnički aspekti propedeutike i „VKhUTEMAS Collection 1920-1929“
T1  - Avant-garde, polytechnical aspects of propedeutic and „VKhUTEMAS Collection 1920-1929“
SP  - 865
EP  - 869
UR  - https://hdl.handle.net/21.15107/rcub_cer_7376
ER  - 

@conference{
author = "Polić, Suzana R. and Milosavljević, Anđelka and Petronić, Sanja",
year = "2021",
abstract = "Fenomen obrazovnog politehničkog koncepta VKhUTEMAS (Высшие государственные художественно-технические мастерские), koji je izgrađivan i realizovan tridesetih godina XX veka u Moskvi, savremeni teoretičari povezuju sa metodologijom stvaranja avangarde, ne samo u umetnosti i industrijskom dizajnu, već i u domenu mišljenja o problemima obrazovanja i eksperimentalnim nastavnim metodama. Takođe su značajni i programski sadržaji koji se odnose na domene proizvodnje, odnosno tehnologije materijala, posebno obrade metala. U ovom radu, iz politehničke vizure, koja je bila zastupljena posebno u bazičnom, propedeutičkom delu ovog obrazovnog koncepta, istražuje se pitanje predmetnosti zaštite kulturnog nasleđa VKhUTEMAS, na primeru studije slučaja kolekcije koja se danas nalazi u The Getty Research Institute u Los Anđelesu, pod nazivom „VKhUTEMAS Collection, 1920-1929“., Phenomenon of the educational polytechnic concept of VKhUTEMAS (Высшие
государственные художественно-технические мастерские), which was built and implemented in the 1930s in Moscow, modern theorists connect with the methodology of creating avant-garde, not only in art and industrial design, already in the domain of opinions on education and experimental teaching methods. Also, significant are programs facilities relating to the domain of production, i.e. technology of materials, especially metal processing. In this paper from the polytechnic point of view, which was represented especially in the basic, propeductile part of this educational concept, the question of the subject matter of protection of the cultural heritage of Vkhutemas is investigated, on the example of the Study of Collection, which is located in the Getty Research Institute in Los Angeles, entitled "Vkhutemas Collection, 1920-1929".",
publisher = "Beograd: Akademija tehničkih strukovnih studija (ATSS)",
journal = "Zbornik radova, 6. naučno-stručni skup POLITEHNIKA, Beograd, 10. decembar 2021.",
title = "Avangarda, politehnički aspekti propedeutike i „VKhUTEMAS Collection 1920-1929“, Avant-garde, polytechnical aspects of propedeutic and „VKhUTEMAS Collection 1920-1929“",
pages = "865-869",
url = "https://hdl.handle.net/21.15107/rcub_cer_7376"
}

Polić, S. R., Milosavljević, A.,& Petronić, S.. (2021). Avangarda, politehnički aspekti propedeutike i „VKhUTEMAS Collection 1920-1929“. in Zbornik radova, 6. naučno-stručni skup POLITEHNIKA, Beograd, 10. decembar 2021.
Beograd: Akademija tehničkih strukovnih studija (ATSS)., 865-869.
https://hdl.handle.net/21.15107/rcub_cer_7376

Polić SR, Milosavljević A, Petronić S. Avangarda, politehnički aspekti propedeutike i „VKhUTEMAS Collection 1920-1929“. in Zbornik radova, 6. naučno-stručni skup POLITEHNIKA, Beograd, 10. decembar 2021.. 2021;:865-869.
https://hdl.handle.net/21.15107/rcub_cer_7376 .

Polić, Suzana R., Milosavljević, Anđelka, Petronić, Sanja, "Avangarda, politehnički aspekti propedeutike i „VKhUTEMAS Collection 1920-1929“" in Zbornik radova, 6. naučno-stručni skup POLITEHNIKA, Beograd, 10. decembar 2021. (2021):865-869,
https://hdl.handle.net/21.15107/rcub_cer_7376 .

TY  - CONF
AU  - Polić, Suzana R.
AU  - Petronić, Sanja
AU  - Milosavljević, Anđelka
PY  - 2021
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/7375
AB  - Umetnost kovanog gvožđa, vizantijska tehnika izrade predmeta, arheološko srebro srpskog srednjovekovnog blaga, predmeti od antičkog kamenja za pečate i nakit iz kolekcije Muzeja Kneza Pavla, zatim izrada relikvijara, umetnička obrada mačeva u skitskoj umetnosti, emajliranje, kopaničarstvo (rezbarenje drveta), staro srpsko zlatarstvo, kao i staro metalno posuđe srpskih vladarskih kuća, samo su neke od tema koje su bile zastupljene u časopisu Umetnički pregled, koji je u periodu od 1937-1941. godine objavljivao Muzej Kneza Pavla u Beogradu. U ovom radu, predmet istraživanja su politehnički sadržaji i način njihove tematizacije, u vezi sa istorijom, tradicijom, etnologijom i kulturom.
AB  - Wrought iron art, Byzantine technique of making items, archeological silver of Serbian medieval treasures, Antique stones for seals and jewelry from the collection of the Prince Paul Museum, then, making reliquaries, art processing in Scythians swords, enamel, wood carving, old Serbian art of craft gold, as well as the old dishes metal of Serbian ruling houses, only some of the topics that were represented in the magazine “Umetnički pregled”, which is in the period from 1937-1941. published the Prince Paule Museum in Belgrade. In this paper, the subject of research are polytechnic contents and the modus of their thematization, regarding history, tradition, ethnology and culture.
PB  - Beograd: Akademija tehničkih strukovnih studija (ATSS)
C3  - Zbornik radova, 6. naučno-stručni skup POLITEHNIKA, Beograd, 10. decembar 2021.
T1  - Tematizacija politehničkih sadržaja u glasilu Muzeja Kneza Pavla, časopisu „Umetnički pregled“ (1937-1941)
T1  - Thematisation of polytechnical contents in the Prince Paul Museum Journal "Umetnički pregled" (1937-1941)
SP  - 860
EP  - 864
UR  - https://hdl.handle.net/21.15107/rcub_cer_7375
ER  - 

@conference{
author = "Polić, Suzana R. and Petronić, Sanja and Milosavljević, Anđelka",
year = "2021",
abstract = "Umetnost kovanog gvožđa, vizantijska tehnika izrade predmeta, arheološko srebro srpskog srednjovekovnog blaga, predmeti od antičkog kamenja za pečate i nakit iz kolekcije Muzeja Kneza Pavla, zatim izrada relikvijara, umetnička obrada mačeva u skitskoj umetnosti, emajliranje, kopaničarstvo (rezbarenje drveta), staro srpsko zlatarstvo, kao i staro metalno posuđe srpskih vladarskih kuća, samo su neke od tema koje su bile zastupljene u časopisu Umetnički pregled, koji je u periodu od 1937-1941. godine objavljivao Muzej Kneza Pavla u Beogradu. U ovom radu, predmet istraživanja su politehnički sadržaji i način njihove tematizacije, u vezi sa istorijom, tradicijom, etnologijom i kulturom., Wrought iron art, Byzantine technique of making items, archeological silver of Serbian medieval treasures, Antique stones for seals and jewelry from the collection of the Prince Paul Museum, then, making reliquaries, art processing in Scythians swords, enamel, wood carving, old Serbian art of craft gold, as well as the old dishes metal of Serbian ruling houses, only some of the topics that were represented in the magazine “Umetnički pregled”, which is in the period from 1937-1941. published the Prince Paule Museum in Belgrade. In this paper, the subject of research are polytechnic contents and the modus of their thematization, regarding history, tradition, ethnology and culture.",
publisher = "Beograd: Akademija tehničkih strukovnih studija (ATSS)",
journal = "Zbornik radova, 6. naučno-stručni skup POLITEHNIKA, Beograd, 10. decembar 2021.",
title = "Tematizacija politehničkih sadržaja u glasilu Muzeja Kneza Pavla, časopisu „Umetnički pregled“ (1937-1941), Thematisation of polytechnical contents in the Prince Paul Museum Journal "Umetnički pregled" (1937-1941)",
pages = "860-864",
url = "https://hdl.handle.net/21.15107/rcub_cer_7375"
}

Polić, S. R., Petronić, S.,& Milosavljević, A.. (2021). Tematizacija politehničkih sadržaja u glasilu Muzeja Kneza Pavla, časopisu „Umetnički pregled“ (1937-1941). in Zbornik radova, 6. naučno-stručni skup POLITEHNIKA, Beograd, 10. decembar 2021.
Beograd: Akademija tehničkih strukovnih studija (ATSS)., 860-864.
https://hdl.handle.net/21.15107/rcub_cer_7375

Polić SR, Petronić S, Milosavljević A. Tematizacija politehničkih sadržaja u glasilu Muzeja Kneza Pavla, časopisu „Umetnički pregled“ (1937-1941). in Zbornik radova, 6. naučno-stručni skup POLITEHNIKA, Beograd, 10. decembar 2021.. 2021;:860-864.
https://hdl.handle.net/21.15107/rcub_cer_7375 .

Polić, Suzana R., Petronić, Sanja, Milosavljević, Anđelka, "Tematizacija politehničkih sadržaja u glasilu Muzeja Kneza Pavla, časopisu „Umetnički pregled“ (1937-1941)" in Zbornik radova, 6. naučno-stručni skup POLITEHNIKA, Beograd, 10. decembar 2021. (2021):860-864,
https://hdl.handle.net/21.15107/rcub_cer_7375 .