Butulija, Svetlana

Link to this page

Authority KeyName Variants
39989a62-f268-4321-98d9-f1f2427aadf9
  • Butulija, Svetlana (3)
Projects

Author's Bibliography

The influence of strontium content and sintering temperature on monazite stability

Mirković, Miljana; Maletaškić, Jelena; Butulija, Svetlana; Anđelković, Ljubica; Šuljagić, Marija

(Association for ETRAN Society, 2024)

TY  - JOUR
AU  - Mirković, Miljana
AU  - Maletaškić, Jelena
AU  - Butulija, Svetlana
AU  - Anđelković, Ljubica
AU  - Šuljagić, Marija
PY  - 2024
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/7551
AB  - This paper shows a simple way to synthesize a series of Ce1-xSrxPO4 ceramic materials using acetate solutions of Ce and Sr instead of nitrate which were used so far. For synthesis, the preparation method was used by simple mixing of acetate solutions of Ceand Sr(, with NaH2PO4 at room temperature, and the studied compositions were Ce1-xSrxPO4 (where x = 0, 0.1, 0.2, 0.3, 0.4, 0.5). The disintegration of Sr in monazite structures in different sintering temperature ranges from 600°C to 1000°C was investigated. The X-ray diffraction was used to track the evolution of the phase composition with thermal treatment. The morphology of sintered ceramics was obtained by scanning electron microscopy and vibrational bands of selected spectra were observed using the FT-IR method. Relative geometric density of selected samples was evaluated. The most favorable conditions for obtaining high-temperature Ce, Sr phosphate-based ceramic material are reported.
AB  - У овом раду је приказан једноставан начин да се синтетише серија Ce1-xSrxPO4 керамичких материјала коришћењем ацетатних раствора Ce и Sr уместо до сада коришћених нитрата. За синтезу је коришћен метод припреме једноставним мешањем раствора Ce(C2H3O2)3·xH2O), Sr(C2H3O2)2, и NaH2PO4 као прекурсора на собној температури, а испитивани састави су Ce1-xSrxPO4 (где је к = 0 , 0,1, 0,2, 0,3, 0,4, 0,5). Испитивана је дезинтеграција Sr у структурама моназита у различитим температурним распонима синтеровања од 600 °C до 1000 °C. Дифракција рендгенских зрака на праху (XRD) је коришћена за праћење еволуције фазног састава синтетисаних и синтерованих узорака. Морфологија синтероване керамике испитивана је скенирајућом електронском микроскопијом (СЕМ), а вибрациое траке одабраних спектра су испитане ФТИР методом. Згушњавање и еволуција микроструктуре су одређене коришћењем релативне геометријске густине одабраних узорака. Приказани су најповољнији услови за добијање високотемпературног керамичког материјала на бази Ce, Sr фосфата.
PB  - Association for ETRAN Society
T2  - Science of Sintering
T1  - The influence of strontium content and sintering temperature on monazite stability
VL  - 56
SP  - 115
EP  - 121
DO  - 10.2298/SOS220811024M
ER  - 
@article{
author = "Mirković, Miljana and Maletaškić, Jelena and Butulija, Svetlana and Anđelković, Ljubica and Šuljagić, Marija",
year = "2024",
abstract = "This paper shows a simple way to synthesize a series of Ce1-xSrxPO4 ceramic materials using acetate solutions of Ce and Sr instead of nitrate which were used so far. For synthesis, the preparation method was used by simple mixing of acetate solutions of Ceand Sr(, with NaH2PO4 at room temperature, and the studied compositions were Ce1-xSrxPO4 (where x = 0, 0.1, 0.2, 0.3, 0.4, 0.5). The disintegration of Sr in monazite structures in different sintering temperature ranges from 600°C to 1000°C was investigated. The X-ray diffraction was used to track the evolution of the phase composition with thermal treatment. The morphology of sintered ceramics was obtained by scanning electron microscopy and vibrational bands of selected spectra were observed using the FT-IR method. Relative geometric density of selected samples was evaluated. The most favorable conditions for obtaining high-temperature Ce, Sr phosphate-based ceramic material are reported., У овом раду је приказан једноставан начин да се синтетише серија Ce1-xSrxPO4 керамичких материјала коришћењем ацетатних раствора Ce и Sr уместо до сада коришћених нитрата. За синтезу је коришћен метод припреме једноставним мешањем раствора Ce(C2H3O2)3·xH2O), Sr(C2H3O2)2, и NaH2PO4 као прекурсора на собној температури, а испитивани састави су Ce1-xSrxPO4 (где је к = 0 , 0,1, 0,2, 0,3, 0,4, 0,5). Испитивана је дезинтеграција Sr у структурама моназита у различитим температурним распонима синтеровања од 600 °C до 1000 °C. Дифракција рендгенских зрака на праху (XRD) је коришћена за праћење еволуције фазног састава синтетисаних и синтерованих узорака. Морфологија синтероване керамике испитивана је скенирајућом електронском микроскопијом (СЕМ), а вибрациое траке одабраних спектра су испитане ФТИР методом. Згушњавање и еволуција микроструктуре су одређене коришћењем релативне геометријске густине одабраних узорака. Приказани су најповољнији услови за добијање високотемпературног керамичког материјала на бази Ce, Sr фосфата.",
publisher = "Association for ETRAN Society",
journal = "Science of Sintering",
title = "The influence of strontium content and sintering temperature on monazite stability",
volume = "56",
pages = "115-121",
doi = "10.2298/SOS220811024M"
}
Mirković, M., Maletaškić, J., Butulija, S., Anđelković, L.,& Šuljagić, M.. (2024). The influence of strontium content and sintering temperature on monazite stability. in Science of Sintering
Association for ETRAN Society., 56, 115-121.
https://doi.org/10.2298/SOS220811024M
Mirković M, Maletaškić J, Butulija S, Anđelković L, Šuljagić M. The influence of strontium content and sintering temperature on monazite stability. in Science of Sintering. 2024;56:115-121.
doi:10.2298/SOS220811024M .
Mirković, Miljana, Maletaškić, Jelena, Butulija, Svetlana, Anđelković, Ljubica, Šuljagić, Marija, "The influence of strontium content and sintering temperature on monazite stability" in Science of Sintering, 56 (2024):115-121,
https://doi.org/10.2298/SOS220811024M . .

The influence of strontium content and sintering temperature on monazite stability

Mirković, Miljana; Maletaskić, Jelena; Butulija, Svetlana; Anđelković, Ljubica; Šuljagić, Marija

(Association for ETRAN Society, 2023)

TY  - JOUR
AU  - Mirković, Miljana
AU  - Maletaskić, Jelena
AU  - Butulija, Svetlana
AU  - Anđelković, Ljubica
AU  - Šuljagić, Marija
PY  - 2023
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/7211
AB  - This paper shows a simple way to synthesize a series of Ce1-xSrxPO4 ceramic materials using acetate solutions of Ce and Sr instead of nitrate which were used so far. For synthesis, the preparation method was used by simple mixing of acetate solutions of Ceand Sr(, with NaH2PO4 at room temperature, and the studied compositions were Ce1-xSrxPO4 (where x = 0, 0.1, 0.2, 0.3, 0.4, 0.5). The disintegration of Sr in monazite structures in different sintering temperature ranges from 600°C to 1000°C was investigated. The X-ray diffraction was used to track the evolution of the phase composition with thermal treatment. The morphology of sintered ceramics was obtained by scanning electron microscopy and vibrational bands of selected spectra were observed using the FT-IR method. Relative geometric density of selected samples was evaluated. The most favorable conditions for obtaining high-temperature Ce, Sr phosphate-based ceramic material are reported.
AB  - У овом раду је приказан једноставан начин да се синтетише серија Ce1-xSrxPO4 керамичких материјала коришћењем ацетатних раствора Ce и Sr уместо до сада  коришћених нитрата. За синтезу је коришћен метод припреме једноставним мешањем  раствора Ce(C2H3O2)3·xH2O), Sr(C2H3O2)2, и NaH2PO4 као прекурсора на собној  температури, а испитивани састави су Ce1-xSrxPO4 (где је к = 0 , 0,1, 0,2, 0,3, 0,4, 0,5).  Испитивана је дезинтеграција Sr у структурама моназита у различитим  температурним распонима синтеровања од 600 °C до 1000 °C. Дифракција рендгенских  зрака на праху (XRD) је коришћена за праћење еволуције фазног састава синтетисаних и  синтерованих узорака. Морфологија синтероване керамике испитивана је скенирајућом  електронском микроскопијом (СЕМ), а вибрациое траке одабраних спектра су испитане  ФТИР методом. Згушњавање и еволуција микроструктуре су одређене коришћењем  релативне геометријске густине одабраних узорака. Приказани су најповољнији услови за  добијање високотемпературног керамичког материјала на бази Ce, Sr фосфата.
PB  - Association for ETRAN Society
T2  - Science of Sintering
T1  - The influence of strontium content and sintering temperature on monazite stability
DO  - 10.2298/SOS220811024M
ER  - 
@article{
author = "Mirković, Miljana and Maletaskić, Jelena and Butulija, Svetlana and Anđelković, Ljubica and Šuljagić, Marija",
year = "2023",
abstract = "This paper shows a simple way to synthesize a series of Ce1-xSrxPO4 ceramic materials using acetate solutions of Ce and Sr instead of nitrate which were used so far. For synthesis, the preparation method was used by simple mixing of acetate solutions of Ceand Sr(, with NaH2PO4 at room temperature, and the studied compositions were Ce1-xSrxPO4 (where x = 0, 0.1, 0.2, 0.3, 0.4, 0.5). The disintegration of Sr in monazite structures in different sintering temperature ranges from 600°C to 1000°C was investigated. The X-ray diffraction was used to track the evolution of the phase composition with thermal treatment. The morphology of sintered ceramics was obtained by scanning electron microscopy and vibrational bands of selected spectra were observed using the FT-IR method. Relative geometric density of selected samples was evaluated. The most favorable conditions for obtaining high-temperature Ce, Sr phosphate-based ceramic material are reported., У овом раду је приказан једноставан начин да се синтетише серија Ce1-xSrxPO4 керамичких материјала коришћењем ацетатних раствора Ce и Sr уместо до сада  коришћених нитрата. За синтезу је коришћен метод припреме једноставним мешањем  раствора Ce(C2H3O2)3·xH2O), Sr(C2H3O2)2, и NaH2PO4 као прекурсора на собној  температури, а испитивани састави су Ce1-xSrxPO4 (где је к = 0 , 0,1, 0,2, 0,3, 0,4, 0,5).  Испитивана је дезинтеграција Sr у структурама моназита у различитим  температурним распонима синтеровања од 600 °C до 1000 °C. Дифракција рендгенских  зрака на праху (XRD) је коришћена за праћење еволуције фазног састава синтетисаних и  синтерованих узорака. Морфологија синтероване керамике испитивана је скенирајућом  електронском микроскопијом (СЕМ), а вибрациое траке одабраних спектра су испитане  ФТИР методом. Згушњавање и еволуција микроструктуре су одређене коришћењем  релативне геометријске густине одабраних узорака. Приказани су најповољнији услови за  добијање високотемпературног керамичког материјала на бази Ce, Sr фосфата.",
publisher = "Association for ETRAN Society",
journal = "Science of Sintering",
title = "The influence of strontium content and sintering temperature on monazite stability",
doi = "10.2298/SOS220811024M"
}
Mirković, M., Maletaskić, J., Butulija, S., Anđelković, L.,& Šuljagić, M.. (2023). The influence of strontium content and sintering temperature on monazite stability. in Science of Sintering
Association for ETRAN Society..
https://doi.org/10.2298/SOS220811024M
Mirković M, Maletaskić J, Butulija S, Anđelković L, Šuljagić M. The influence of strontium content and sintering temperature on monazite stability. in Science of Sintering. 2023;.
doi:10.2298/SOS220811024M .
Mirković, Miljana, Maletaskić, Jelena, Butulija, Svetlana, Anđelković, Ljubica, Šuljagić, Marija, "The influence of strontium content and sintering temperature on monazite stability" in Science of Sintering (2023),
https://doi.org/10.2298/SOS220811024M . .

Brushite-Metakaolin Composite Geopolymer Material as an Effective Adsorbent for Lead Removal from Aqueous Solutions

Đukić, Dunja; Krstić, Aleksandar; Jakovljević, Ksenija; Butulija, Svetlana; Anđelković, Ljubica; Pavlović, Vladimir; Mirković, Miljana

(MDPI, 2022)

TY  - JOUR
AU  - Đukić, Dunja
AU  - Krstić, Aleksandar
AU  - Jakovljević, Ksenija
AU  - Butulija, Svetlana
AU  - Anđelković, Ljubica
AU  - Pavlović, Vladimir
AU  - Mirković, Miljana
PY  - 2022
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/4941
AB  - Newly designed mesoporous brushite-metakaolin-based geopolymer materials were examined with an idea for using this material as a potential adsorbent for Pb(II) removal from aqueous solutions. As a starting component for geopolymer synthesis, a natural raw kaolinite clay with the
addition of 2 wt.%, 4 wt.%, 6 wt.%, 8 wt.%, and 10 wt.% of pure brushite was used. Phase, structural,morphological, and adsorption properties of newly synthesized mesoporous brushite-metakaolin geopolymer materials were examined in detail by the means of XRPD, FTIR, SEM-EDS, BET/BJH, and ICP-OES methods. The ICP-OES results showed that the synthesized material samples with 2 wt.%, 4 wt.%, and 6 wt.% of brushite possess significant adsorption properties and the mechanisms of the adsorption process can be attributed to chemisorption. The most notable result is that brushite-metakaolin-geopolymer with 2 wt.% of brushite have the best efficiency removal, more than 85% of Pb(II).
PB  - MDPI
T2  - Sustainability
T1  - Brushite-Metakaolin Composite Geopolymer Material as an Effective Adsorbent for Lead Removal from Aqueous Solutions
VL  - 14
IS  - 7
SP  - 4003
DO  - 10.3390/su14074003
ER  - 
@article{
author = "Đukić, Dunja and Krstić, Aleksandar and Jakovljević, Ksenija and Butulija, Svetlana and Anđelković, Ljubica and Pavlović, Vladimir and Mirković, Miljana",
year = "2022",
abstract = "Newly designed mesoporous brushite-metakaolin-based geopolymer materials were examined with an idea for using this material as a potential adsorbent for Pb(II) removal from aqueous solutions. As a starting component for geopolymer synthesis, a natural raw kaolinite clay with the
addition of 2 wt.%, 4 wt.%, 6 wt.%, 8 wt.%, and 10 wt.% of pure brushite was used. Phase, structural,morphological, and adsorption properties of newly synthesized mesoporous brushite-metakaolin geopolymer materials were examined in detail by the means of XRPD, FTIR, SEM-EDS, BET/BJH, and ICP-OES methods. The ICP-OES results showed that the synthesized material samples with 2 wt.%, 4 wt.%, and 6 wt.% of brushite possess significant adsorption properties and the mechanisms of the adsorption process can be attributed to chemisorption. The most notable result is that brushite-metakaolin-geopolymer with 2 wt.% of brushite have the best efficiency removal, more than 85% of Pb(II).",
publisher = "MDPI",
journal = "Sustainability",
title = "Brushite-Metakaolin Composite Geopolymer Material as an Effective Adsorbent for Lead Removal from Aqueous Solutions",
volume = "14",
number = "7",
pages = "4003",
doi = "10.3390/su14074003"
}
Đukić, D., Krstić, A., Jakovljević, K., Butulija, S., Anđelković, L., Pavlović, V.,& Mirković, M.. (2022). Brushite-Metakaolin Composite Geopolymer Material as an Effective Adsorbent for Lead Removal from Aqueous Solutions. in Sustainability
MDPI., 14(7), 4003.
https://doi.org/10.3390/su14074003
Đukić D, Krstić A, Jakovljević K, Butulija S, Anđelković L, Pavlović V, Mirković M. Brushite-Metakaolin Composite Geopolymer Material as an Effective Adsorbent for Lead Removal from Aqueous Solutions. in Sustainability. 2022;14(7):4003.
doi:10.3390/su14074003 .
Đukić, Dunja, Krstić, Aleksandar, Jakovljević, Ksenija, Butulija, Svetlana, Anđelković, Ljubica, Pavlović, Vladimir, Mirković, Miljana, "Brushite-Metakaolin Composite Geopolymer Material as an Effective Adsorbent for Lead Removal from Aqueous Solutions" in Sustainability, 14, no. 7 (2022):4003,
https://doi.org/10.3390/su14074003 . .
2