TY  - CONF
AU  - Rosić, Milena
AU  - Maksimović, Jelena
AU  - Senćanski, Jelena
AU  - Dodevski, Vladimir
AU  - Čebela, Maria
AU  - Simović-Pavlović, Marina
AU  - Pagnacco, Maja
PY  - 2023
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/7360
AB  - Cobalt molybdate is of importantce for the development of mobile telecommunication systems, such as mobile phones and high-quality microwave dielectric ceramics for high resonant frequency selectivity in microwave devices. Due to their special catalytic properties, cobalt molybdates have been used as catalysts in many chemical and petrochemical processes. The CoMoO4 nanoparticles ware synthetized in a simple, quick, and inexpensive way, by using a glycine nitrate procedure (GNP), with and without calcination at 450 °C [1], and investigated by applying the Briggs-Rauscher oscillatory reaction method [2]. The complex oscillatory BR reaction is sensitive to different insoluble analyte addition [3]. This feature of BR oscillatory reaction is used to investigate effect of different masses of GNP synthetized (with and without calcination at 450 °C) CoMoO4 samples on oscillatory dynamics. These two samples give the complete different effects in BR reaction. Obtained results strongly suggest that BR oscillatory reaction could be used for distinguishing these two samples, opening new direction in the investigation of ceramics materials.
PB  - Belgrade : University of Belgrade, Institute for Multidisciplinary Research
C3  - Programme and the Book of Abstracts / 7th Conference of The Serbian Society for Ceramic Materials, 7CSCS-2023, June 14-16, 2023 Belgrade
T1  - Effect of CoMoO4 nanopowders synthesized by glycine nitrate procedure and calcinated at 450 °C on Briggs-Rauscher oscillatory dynamics
SP  - 120
EP  - 120
UR  - https://hdl.handle.net/21.15107/rcub_cer_7360
ER  - 

@conference{
author = "Rosić, Milena and Maksimović, Jelena and Senćanski, Jelena and Dodevski, Vladimir and Čebela, Maria and Simović-Pavlović, Marina and Pagnacco, Maja",
year = "2023",
abstract = "Cobalt molybdate is of importantce for the development of mobile telecommunication systems, such as mobile phones and high-quality microwave dielectric ceramics for high resonant frequency selectivity in microwave devices. Due to their special catalytic properties, cobalt molybdates have been used as catalysts in many chemical and petrochemical processes. The CoMoO4 nanoparticles ware synthetized in a simple, quick, and inexpensive way, by using a glycine nitrate procedure (GNP), with and without calcination at 450 °C [1], and investigated by applying the Briggs-Rauscher oscillatory reaction method [2]. The complex oscillatory BR reaction is sensitive to different insoluble analyte addition [3]. This feature of BR oscillatory reaction is used to investigate effect of different masses of GNP synthetized (with and without calcination at 450 °C) CoMoO4 samples on oscillatory dynamics. These two samples give the complete different effects in BR reaction. Obtained results strongly suggest that BR oscillatory reaction could be used for distinguishing these two samples, opening new direction in the investigation of ceramics materials.",
publisher = "Belgrade : University of Belgrade, Institute for Multidisciplinary Research",
journal = "Programme and the Book of Abstracts / 7th Conference of The Serbian Society for Ceramic Materials, 7CSCS-2023, June 14-16, 2023 Belgrade",
title = "Effect of CoMoO4 nanopowders synthesized by glycine nitrate procedure and calcinated at 450 °C on Briggs-Rauscher oscillatory dynamics",
pages = "120-120",
url = "https://hdl.handle.net/21.15107/rcub_cer_7360"
}

Rosić, M., Maksimović, J., Senćanski, J., Dodevski, V., Čebela, M., Simović-Pavlović, M.,& Pagnacco, M.. (2023). Effect of CoMoO4 nanopowders synthesized by glycine nitrate procedure and calcinated at 450 °C on Briggs-Rauscher oscillatory dynamics. in Programme and the Book of Abstracts / 7th Conference of The Serbian Society for Ceramic Materials, 7CSCS-2023, June 14-16, 2023 Belgrade
Belgrade : University of Belgrade, Institute for Multidisciplinary Research., 120-120.
https://hdl.handle.net/21.15107/rcub_cer_7360

Rosić M, Maksimović J, Senćanski J, Dodevski V, Čebela M, Simović-Pavlović M, Pagnacco M. Effect of CoMoO4 nanopowders synthesized by glycine nitrate procedure and calcinated at 450 °C on Briggs-Rauscher oscillatory dynamics. in Programme and the Book of Abstracts / 7th Conference of The Serbian Society for Ceramic Materials, 7CSCS-2023, June 14-16, 2023 Belgrade. 2023;:120-120.
https://hdl.handle.net/21.15107/rcub_cer_7360 .

Rosić, Milena, Maksimović, Jelena, Senćanski, Jelena, Dodevski, Vladimir, Čebela, Maria, Simović-Pavlović, Marina, Pagnacco, Maja, "Effect of CoMoO4 nanopowders synthesized by glycine nitrate procedure and calcinated at 450 °C on Briggs-Rauscher oscillatory dynamics" in Programme and the Book of Abstracts / 7th Conference of The Serbian Society for Ceramic Materials, 7CSCS-2023, June 14-16, 2023 Belgrade (2023):120-120,
https://hdl.handle.net/21.15107/rcub_cer_7360 .

TY  - CONF
AU  - Krstić, Sanja
AU  - Dodevski, Vladimir
AU  - Čebela, Maria
AU  - Rosić, Milena
AU  - Egerić, Marija
AU  - Vujasin, Radojka
AU  - Jaćimovski, Darko
PY  - 2023
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/11485
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/6622
AB  - The main aim of this research is to show influence of different hydroxides, applied in carbon materials activation process on the electrochemical properties of activated carbon samples. The carbon material samples were prepared by hydrothermal treatment of sucrose and thermally activated using KOH, NaOH and LiOH by chemical activation method. The electrochemical properties of the obtained carbon material samples were examined by cyclic voltammetry and electrochemical impedance spectroscopy and correlated to their physicochemical properties. Investigated samples showed characteristic capacitor-like behavior. The best result of specific capacitance was obtained for the sample synthesized treated by KOH, while the increase in capacitance follows the arrangement of the growth of ionic radius of a metal from an alkali which is used for activation. Dependence on the type of hydroxide is due to differences in the radii of a metal. The alkalis with larger radii of metal produce wider pores and consequently the structure of a porous layer become more accessible and available to the charge transfer of capacitive response.
PB  - Belgrade : University of Belgrade, Institute for Multidisciplinary Research
C3  - Programme and the Book of Abstracts / 7th Conference of The Serbian Society for Ceramic Materials, 7CSCS-2023, June 14-16, 2023 Belgrade
T1  - Supercapacitive properties of carbon materials activated by alkali metal hydroxides obtained from sucrose
SP  - 102
EP  - 102
UR  - https://hdl.handle.net/21.15107/rcub_vinar_11485
ER  - 

@conference{
author = "Krstić, Sanja and Dodevski, Vladimir and Čebela, Maria and Rosić, Milena and Egerić, Marija and Vujasin, Radojka and Jaćimovski, Darko",
year = "2023",
abstract = "The main aim of this research is to show influence of different hydroxides, applied in carbon materials activation process on the electrochemical properties of activated carbon samples. The carbon material samples were prepared by hydrothermal treatment of sucrose and thermally activated using KOH, NaOH and LiOH by chemical activation method. The electrochemical properties of the obtained carbon material samples were examined by cyclic voltammetry and electrochemical impedance spectroscopy and correlated to their physicochemical properties. Investigated samples showed characteristic capacitor-like behavior. The best result of specific capacitance was obtained for the sample synthesized treated by KOH, while the increase in capacitance follows the arrangement of the growth of ionic radius of a metal from an alkali which is used for activation. Dependence on the type of hydroxide is due to differences in the radii of a metal. The alkalis with larger radii of metal produce wider pores and consequently the structure of a porous layer become more accessible and available to the charge transfer of capacitive response.",
publisher = "Belgrade : University of Belgrade, Institute for Multidisciplinary Research",
journal = "Programme and the Book of Abstracts / 7th Conference of The Serbian Society for Ceramic Materials, 7CSCS-2023, June 14-16, 2023 Belgrade",
title = "Supercapacitive properties of carbon materials activated by alkali metal hydroxides obtained from sucrose",
pages = "102-102",
url = "https://hdl.handle.net/21.15107/rcub_vinar_11485"
}

Krstić, S., Dodevski, V., Čebela, M., Rosić, M., Egerić, M., Vujasin, R.,& Jaćimovski, D.. (2023). Supercapacitive properties of carbon materials activated by alkali metal hydroxides obtained from sucrose. in Programme and the Book of Abstracts / 7th Conference of The Serbian Society for Ceramic Materials, 7CSCS-2023, June 14-16, 2023 Belgrade
Belgrade : University of Belgrade, Institute for Multidisciplinary Research., 102-102.
https://hdl.handle.net/21.15107/rcub_vinar_11485

Krstić S, Dodevski V, Čebela M, Rosić M, Egerić M, Vujasin R, Jaćimovski D. Supercapacitive properties of carbon materials activated by alkali metal hydroxides obtained from sucrose. in Programme and the Book of Abstracts / 7th Conference of The Serbian Society for Ceramic Materials, 7CSCS-2023, June 14-16, 2023 Belgrade. 2023;:102-102.
https://hdl.handle.net/21.15107/rcub_vinar_11485 .

Krstić, Sanja, Dodevski, Vladimir, Čebela, Maria, Rosić, Milena, Egerić, Marija, Vujasin, Radojka, Jaćimovski, Darko, "Supercapacitive properties of carbon materials activated by alkali metal hydroxides obtained from sucrose" in Programme and the Book of Abstracts / 7th Conference of The Serbian Society for Ceramic Materials, 7CSCS-2023, June 14-16, 2023 Belgrade (2023):102-102,
https://hdl.handle.net/21.15107/rcub_vinar_11485 .

TY  - JOUR
AU  - Janković, Bojan Ž.
AU  - Kojić, Marija
AU  - Milošević, Milena
AU  - Rosić, Milena
AU  - Waisi, Hadi
AU  - Božilović, Bojana
AU  - Manić, Nebojša
AU  - Dodevski, Vladimir
PY  - 2023
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/7162
AB  - Thermo-chemical conversion via the pyrolysis of cigarette butt (CB) filters was successfully valorized and upcycled in the pre-carbonization and carbonization stages. The pre-carbonization stage (devolatilization) of the precursor material (cellulose acetate filter, r-CAcF) was analyzed by micro-scale experiments under non-isothermal conditions using TG-DTG-DTA and DSC techniques. The results of a detailed kinetic study showed that the decomposition of r-CAcF takes place via complex mechanisms, including consecutive reaction steps and two single-step reactions. Consecutive stages include the α-transition referred to as a cellulose polymorphic transformation (cellulose I → II) through crystallization mechanism changes, where a more thermodynamically ordered system was obtained. It was found that the transformation rate of cellulose I → II (‘cellulose regeneration’) is strongly affected by the presence of alkali metals and the deacetylation process. Two single-step reactions showed significant overlapping behavior, which involves a nucleation-controlled scission mechanism (producing levoglucosan, gaseous products, and abundant radicals) and hydrolytic decomposition of cellulose by catalytic cleavage of glycosidic bonds with the presence of an acidic catalyst. A macro-scale experiment showed that the operating temperature and heating rate had the most notable effects on the total surface area of the manufactured carbon. A substantial degree of mesoporosity with a median pore radius of 3.1695 nm was identified. The presence of macroporosity on the carbon surface and acidic surface functional groups was observed.
T2  - Polymers
T1  - Upcycling of the Used Cigarette Butt Filters through Pyrolysis Process: Detailed Kinetic Mechanism with Bio-Char Characterization
VL  - 15
IS  - 14
SP  - 3054
DO  - 10.3390/polym15143054
ER  - 

@article{
author = "Janković, Bojan Ž. and Kojić, Marija and Milošević, Milena and Rosić, Milena and Waisi, Hadi and Božilović, Bojana and Manić, Nebojša and Dodevski, Vladimir",
year = "2023",
abstract = "Thermo-chemical conversion via the pyrolysis of cigarette butt (CB) filters was successfully valorized and upcycled in the pre-carbonization and carbonization stages. The pre-carbonization stage (devolatilization) of the precursor material (cellulose acetate filter, r-CAcF) was analyzed by micro-scale experiments under non-isothermal conditions using TG-DTG-DTA and DSC techniques. The results of a detailed kinetic study showed that the decomposition of r-CAcF takes place via complex mechanisms, including consecutive reaction steps and two single-step reactions. Consecutive stages include the α-transition referred to as a cellulose polymorphic transformation (cellulose I → II) through crystallization mechanism changes, where a more thermodynamically ordered system was obtained. It was found that the transformation rate of cellulose I → II (‘cellulose regeneration’) is strongly affected by the presence of alkali metals and the deacetylation process. Two single-step reactions showed significant overlapping behavior, which involves a nucleation-controlled scission mechanism (producing levoglucosan, gaseous products, and abundant radicals) and hydrolytic decomposition of cellulose by catalytic cleavage of glycosidic bonds with the presence of an acidic catalyst. A macro-scale experiment showed that the operating temperature and heating rate had the most notable effects on the total surface area of the manufactured carbon. A substantial degree of mesoporosity with a median pore radius of 3.1695 nm was identified. The presence of macroporosity on the carbon surface and acidic surface functional groups was observed.",
journal = "Polymers",
title = "Upcycling of the Used Cigarette Butt Filters through Pyrolysis Process: Detailed Kinetic Mechanism with Bio-Char Characterization",
volume = "15",
number = "14",
pages = "3054",
doi = "10.3390/polym15143054"
}

Janković, B. Ž., Kojić, M., Milošević, M., Rosić, M., Waisi, H., Božilović, B., Manić, N.,& Dodevski, V.. (2023). Upcycling of the Used Cigarette Butt Filters through Pyrolysis Process: Detailed Kinetic Mechanism with Bio-Char Characterization. in Polymers, 15(14), 3054.
https://doi.org/10.3390/polym15143054

Janković BŽ, Kojić M, Milošević M, Rosić M, Waisi H, Božilović B, Manić N, Dodevski V. Upcycling of the Used Cigarette Butt Filters through Pyrolysis Process: Detailed Kinetic Mechanism with Bio-Char Characterization. in Polymers. 2023;15(14):3054.
doi:10.3390/polym15143054 .

Janković, Bojan Ž., Kojić, Marija, Milošević, Milena, Rosić, Milena, Waisi, Hadi, Božilović, Bojana, Manić, Nebojša, Dodevski, Vladimir, "Upcycling of the Used Cigarette Butt Filters through Pyrolysis Process: Detailed Kinetic Mechanism with Bio-Char Characterization" in Polymers, 15, no. 14 (2023):3054,
https://doi.org/10.3390/polym15143054 . .

TY  - JOUR
AU  - Kandić, Irina
AU  - Kragović, Milan
AU  - Krstić, Jugoslav
AU  - Gulicovski, Jelena
AU  - Popović, Jasmina
AU  - Rosić, Milena
AU  - Karadžić, Vesna
AU  - Stojmenović, Marija
PY  - 2022
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/5506
AB  - The impact of urbanization and modern agricultural practice has led to accelerated eutrophication of aquatic ecosystems, which has resulted in the massive development of cyanobacteria. Very often, in response to various environmental influences, cyanobacteria produce potentially car-cinogenic cyanotoxins. Long-term human exposure to cyanotoxins, through drinking water as well as recreational water (i.e., rivers or lakes), can cause serious health consequences. In order to overcome this problem, this paper presents the synthesis of completely new activated carbons and their potential application in contaminated water treatment. The synthesis and characterization of new active carbon materials obtained from waste biomass, date-palm leaf stalks (P_AC) and black alder cone-like flowers (A_AC) of reliable physical and chemical characteristics were presented in this article. The commercial activated carbon (C_AC) was also examined for the purpose of comparisons with the obtained materials. The detailed characterization of materials was carried out by X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), low-temperature N2 physisorption, and Field emission scanning electron microscopy (FESEM). Preliminary analyzes of the adsorption capacities of all activated carbon materials were conducted on water samples from Aleksandrovac Lake (Southern part of Serbia), as a eutrophic lake, in order to remove Cyanobacteria from water. The results after 24 h of filtration showed removal efficiencies for P_AC, A_AC, and C_AC of 99.99%, 99.99% and 89.79%, respectively.
PB  - Switzerland : Multidisciplinary Digital Publishing Institute (MDPI)
T2  - International Journal of Environmental Research and Public Health
T1  - Natural Cyanobacteria Removers Obtained from Bio-Waste Date-Palm Leaf Stalks and Black Alder Cone-Like Flowers
VL  - 19
IS  - 11
SP  - 6639
DO  - 10.3390/ijerph19116639
ER  - 

@article{
author = "Kandić, Irina and Kragović, Milan and Krstić, Jugoslav and Gulicovski, Jelena and Popović, Jasmina and Rosić, Milena and Karadžić, Vesna and Stojmenović, Marija",
year = "2022",
abstract = "The impact of urbanization and modern agricultural practice has led to accelerated eutrophication of aquatic ecosystems, which has resulted in the massive development of cyanobacteria. Very often, in response to various environmental influences, cyanobacteria produce potentially car-cinogenic cyanotoxins. Long-term human exposure to cyanotoxins, through drinking water as well as recreational water (i.e., rivers or lakes), can cause serious health consequences. In order to overcome this problem, this paper presents the synthesis of completely new activated carbons and their potential application in contaminated water treatment. The synthesis and characterization of new active carbon materials obtained from waste biomass, date-palm leaf stalks (P_AC) and black alder cone-like flowers (A_AC) of reliable physical and chemical characteristics were presented in this article. The commercial activated carbon (C_AC) was also examined for the purpose of comparisons with the obtained materials. The detailed characterization of materials was carried out by X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), low-temperature N2 physisorption, and Field emission scanning electron microscopy (FESEM). Preliminary analyzes of the adsorption capacities of all activated carbon materials were conducted on water samples from Aleksandrovac Lake (Southern part of Serbia), as a eutrophic lake, in order to remove Cyanobacteria from water. The results after 24 h of filtration showed removal efficiencies for P_AC, A_AC, and C_AC of 99.99%, 99.99% and 89.79%, respectively.",
publisher = "Switzerland : Multidisciplinary Digital Publishing Institute (MDPI)",
journal = "International Journal of Environmental Research and Public Health",
title = "Natural Cyanobacteria Removers Obtained from Bio-Waste Date-Palm Leaf Stalks and Black Alder Cone-Like Flowers",
volume = "19",
number = "11",
pages = "6639",
doi = "10.3390/ijerph19116639"
}

Kandić, I., Kragović, M., Krstić, J., Gulicovski, J., Popović, J., Rosić, M., Karadžić, V.,& Stojmenović, M.. (2022). Natural Cyanobacteria Removers Obtained from Bio-Waste Date-Palm Leaf Stalks and Black Alder Cone-Like Flowers. in International Journal of Environmental Research and Public Health
Switzerland : Multidisciplinary Digital Publishing Institute (MDPI)., 19(11), 6639.
https://doi.org/10.3390/ijerph19116639

Kandić I, Kragović M, Krstić J, Gulicovski J, Popović J, Rosić M, Karadžić V, Stojmenović M. Natural Cyanobacteria Removers Obtained from Bio-Waste Date-Palm Leaf Stalks and Black Alder Cone-Like Flowers. in International Journal of Environmental Research and Public Health. 2022;19(11):6639.
doi:10.3390/ijerph19116639 .

Kandić, Irina, Kragović, Milan, Krstić, Jugoslav, Gulicovski, Jelena, Popović, Jasmina, Rosić, Milena, Karadžić, Vesna, Stojmenović, Marija, "Natural Cyanobacteria Removers Obtained from Bio-Waste Date-Palm Leaf Stalks and Black Alder Cone-Like Flowers" in International Journal of Environmental Research and Public Health, 19, no. 11 (2022):6639,
https://doi.org/10.3390/ijerph19116639 . .

TY  - JOUR
AU  - Dodevski, Vladimir
AU  - Pagnacco, Maja
AU  - Radović, Ivana
AU  - Rosić, Milena
AU  - Janković, Bojan
AU  - Stojmenović, Marija
AU  - Mitić, Vojislav V.
PY  - 2020
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/3436
AB  - The aim of this research was to obtain a carbon solid residue by the carbonization process of biomass in an inert atmosphere which, through physical activation and chemical treatment (using TEOS - tetraethyl orthosilicate) would allow creation of highly porous and spatially distinct ordered bio-SiC ceramics. The results of carbonization experiments at several operating temperatures and activation of carbons with multiple-cycle treatments TEOS clearly showed the possibility of obtaining SiC nano-structures, after performing the carbothermal reduction at 1400 °C. The increase in the activation temperature and the duration time starts the development of the SiC particles inside the porous structure. The XRPD analysis showed that the major SiC polytype has cubic SiC (β-SiC) structure and remainder is hexagonal SiC polytypic (α-SiC) structure. It was established that the carbons obtained from carbonization of the Platanus orientalis L. plane tree fruit (PTF) precursor and activated at 850 °C with longer holding times (1 and 2 h) exhibit β-SiC (cubic) nano-wires. A possible nano-wires increment mechanism was suggested. The obtained results represent significant contribution in understanding the process as well as the main characteristics of SiC nano-materials and their possible applications.
PB  - Elsevier
T2  - Materials Chemistry and Physics
T1  - Characterization of silicon carbide ceramics obtained from porous carbon structure achieved by plant carbonization
VL  - 245
SP  - 122768
DO  - 10.1016/j.matchemphys.2020.122768
ER  - 

@article{
author = "Dodevski, Vladimir and Pagnacco, Maja and Radović, Ivana and Rosić, Milena and Janković, Bojan and Stojmenović, Marija and Mitić, Vojislav V.",
year = "2020",
abstract = "The aim of this research was to obtain a carbon solid residue by the carbonization process of biomass in an inert atmosphere which, through physical activation and chemical treatment (using TEOS - tetraethyl orthosilicate) would allow creation of highly porous and spatially distinct ordered bio-SiC ceramics. The results of carbonization experiments at several operating temperatures and activation of carbons with multiple-cycle treatments TEOS clearly showed the possibility of obtaining SiC nano-structures, after performing the carbothermal reduction at 1400 °C. The increase in the activation temperature and the duration time starts the development of the SiC particles inside the porous structure. The XRPD analysis showed that the major SiC polytype has cubic SiC (β-SiC) structure and remainder is hexagonal SiC polytypic (α-SiC) structure. It was established that the carbons obtained from carbonization of the Platanus orientalis L. plane tree fruit (PTF) precursor and activated at 850 °C with longer holding times (1 and 2 h) exhibit β-SiC (cubic) nano-wires. A possible nano-wires increment mechanism was suggested. The obtained results represent significant contribution in understanding the process as well as the main characteristics of SiC nano-materials and their possible applications.",
publisher = "Elsevier",
journal = "Materials Chemistry and Physics",
title = "Characterization of silicon carbide ceramics obtained from porous carbon structure achieved by plant carbonization",
volume = "245",
pages = "122768",
doi = "10.1016/j.matchemphys.2020.122768"
}

Dodevski, V., Pagnacco, M., Radović, I., Rosić, M., Janković, B., Stojmenović, M.,& Mitić, V. V.. (2020). Characterization of silicon carbide ceramics obtained from porous carbon structure achieved by plant carbonization. in Materials Chemistry and Physics
Elsevier., 245, 122768.
https://doi.org/10.1016/j.matchemphys.2020.122768

Dodevski V, Pagnacco M, Radović I, Rosić M, Janković B, Stojmenović M, Mitić VV. Characterization of silicon carbide ceramics obtained from porous carbon structure achieved by plant carbonization. in Materials Chemistry and Physics. 2020;245:122768.
doi:10.1016/j.matchemphys.2020.122768 .

Dodevski, Vladimir, Pagnacco, Maja, Radović, Ivana, Rosić, Milena, Janković, Bojan, Stojmenović, Marija, Mitić, Vojislav V., "Characterization of silicon carbide ceramics obtained from porous carbon structure achieved by plant carbonization" in Materials Chemistry and Physics, 245 (2020):122768,
https://doi.org/10.1016/j.matchemphys.2020.122768 . .