TY  - CONF
AU  - Perić, B
AU  - Simonović, A
AU  - Ivanov, T
AU  - Stupar, S
AU  - Vorkapić, Miloš
AU  - Peković, O
AU  - Svorcan, J
PY  - 2018
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/2927
AB  - Metal membranes are defined as thin steel circular plates. The metal membranes are widely used in the measurement technique and they are constantly loaded over the entire surface. In case that a membrane is loaded with uniform load over the entire surface. In case that the membrane is stiffened over the edge, then it is called a diaphragm. According to the making method membranes are divided into flat and corrugated. Corrugated membranes are used mainly in a low pressure area. Membranes are most commonly made of firm alloy austenitic steel. In this paper numerical and experimental analysis of a thin corrugated diaphragm 24 mm diameter is presented, with variable material thickness and variable corrugations geometry. Experimental tests are conducted on a corrugated stainless steel (AISI 316) diaphragm. Experimental results are compared with numerical results in ANSYS software package. A comparative analysis of the sinusoidal and toroidal diaphragms has shown that there is a higher sensitivity of the sinusoidal diaphragm, that is, if the thickness of the diaphragm increases, and their stiffness is increased. In general, for small pressure ranges from 10 mbar to 50 mbar, the sinusoidal diaphragms have a faster response. © 2018 The Authors.
PB  - Elsevier
C3  - Procedia Structural Integrity
T1  - Design and testing characteristics of thin stainless steel diaphragms
VL  - 13
SP  - 2196
EP  - 2201
DO  - 10.1016/j.prostr.2018.12.141
ER  - 

@conference{
author = "Perić, B and Simonović, A and Ivanov, T and Stupar, S and Vorkapić, Miloš and Peković, O and Svorcan, J",
year = "2018",
abstract = "Metal membranes are defined as thin steel circular plates. The metal membranes are widely used in the measurement technique and they are constantly loaded over the entire surface. In case that a membrane is loaded with uniform load over the entire surface. In case that the membrane is stiffened over the edge, then it is called a diaphragm. According to the making method membranes are divided into flat and corrugated. Corrugated membranes are used mainly in a low pressure area. Membranes are most commonly made of firm alloy austenitic steel. In this paper numerical and experimental analysis of a thin corrugated diaphragm 24 mm diameter is presented, with variable material thickness and variable corrugations geometry. Experimental tests are conducted on a corrugated stainless steel (AISI 316) diaphragm. Experimental results are compared with numerical results in ANSYS software package. A comparative analysis of the sinusoidal and toroidal diaphragms has shown that there is a higher sensitivity of the sinusoidal diaphragm, that is, if the thickness of the diaphragm increases, and their stiffness is increased. In general, for small pressure ranges from 10 mbar to 50 mbar, the sinusoidal diaphragms have a faster response. © 2018 The Authors.",
publisher = "Elsevier",
journal = "Procedia Structural Integrity",
title = "Design and testing characteristics of thin stainless steel diaphragms",
volume = "13",
pages = "2196-2201",
doi = "10.1016/j.prostr.2018.12.141"
}

Perić, B., Simonović, A., Ivanov, T., Stupar, S., Vorkapić, M., Peković, O.,& Svorcan, J.. (2018). Design and testing characteristics of thin stainless steel diaphragms. in Procedia Structural Integrity
Elsevier., 13, 2196-2201.
https://doi.org/10.1016/j.prostr.2018.12.141

Perić B, Simonović A, Ivanov T, Stupar S, Vorkapić M, Peković O, Svorcan J. Design and testing characteristics of thin stainless steel diaphragms. in Procedia Structural Integrity. 2018;13:2196-2201.
doi:10.1016/j.prostr.2018.12.141 .

Perić, B, Simonović, A, Ivanov, T, Stupar, S, Vorkapić, Miloš, Peković, O, Svorcan, J, "Design and testing characteristics of thin stainless steel diaphragms" in Procedia Structural Integrity, 13 (2018):2196-2201,
https://doi.org/10.1016/j.prostr.2018.12.141 . .