TY  - JOUR
AU  - Ristić, Slavica S.
AU  - Polić-Radovanović, Suzana R.
AU  - Katavić, Boris T.
AU  - Kutin, Marina M.
AU  - Nikolić, Zoran N.
AU  - Puharić, Mirjana A.
PY  - 2010
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/6063
AB  - Preventive care, research, and restoration of cultural heritage objects requires multidisciplinary research and the involvement of experts of different profiles, using high technology equipment. Nondestructive methods dominate in the diagnosis of the situation and protection of cultural heritage objects. The application of lasers has opened many possibilities for research in the field of protection, conservation, restoration, and/or assessment of artifacts. We present the results of the interaction of ruby-laser light with the surfaces of Neolithic ceramics (Obrenovac, Serbia) and samples of copper of unknown age. The investigation was conducted in order to determine the maximum energy density of the laser light that can be applied in nondestructive testing and encrustation cleaning of these ceramic and metal cultural heritage objects. We investigate the laser-light interactions using a scanning electron microscope (SEM) with energy-dispersal unit for the analysis of X-rays (EDX).
PB  - Springer
T2  - Journal of Russian Laser Research
T1  - Ruby laser beam interaction with ceramic and copper artifacts
VL  - 31
SP  - 380
EP  - 389
DO  - 10.1007/s10946-010-9158-y
ER  - 

@article{
author = "Ristić, Slavica S. and Polić-Radovanović, Suzana R. and Katavić, Boris T. and Kutin, Marina M. and Nikolić, Zoran N. and Puharić, Mirjana A.",
year = "2010",
abstract = "Preventive care, research, and restoration of cultural heritage objects requires multidisciplinary research and the involvement of experts of different profiles, using high technology equipment. Nondestructive methods dominate in the diagnosis of the situation and protection of cultural heritage objects. The application of lasers has opened many possibilities for research in the field of protection, conservation, restoration, and/or assessment of artifacts. We present the results of the interaction of ruby-laser light with the surfaces of Neolithic ceramics (Obrenovac, Serbia) and samples of copper of unknown age. The investigation was conducted in order to determine the maximum energy density of the laser light that can be applied in nondestructive testing and encrustation cleaning of these ceramic and metal cultural heritage objects. We investigate the laser-light interactions using a scanning electron microscope (SEM) with energy-dispersal unit for the analysis of X-rays (EDX).",
publisher = "Springer",
journal = "Journal of Russian Laser Research",
title = "Ruby laser beam interaction with ceramic and copper artifacts",
volume = "31",
pages = "380-389",
doi = "10.1007/s10946-010-9158-y"
}

Ristić, S. S., Polić-Radovanović, S. R., Katavić, B. T., Kutin, M. M., Nikolić, Z. N.,& Puharić, M. A.. (2010). Ruby laser beam interaction with ceramic and copper artifacts. in Journal of Russian Laser Research
Springer., 31, 380-389.
https://doi.org/10.1007/s10946-010-9158-y

Ristić SS, Polić-Radovanović SR, Katavić BT, Kutin MM, Nikolić ZN, Puharić MA. Ruby laser beam interaction with ceramic and copper artifacts. in Journal of Russian Laser Research. 2010;31:380-389.
doi:10.1007/s10946-010-9158-y .

Ristić, Slavica S., Polić-Radovanović, Suzana R., Katavić, Boris T., Kutin, Marina M., Nikolić, Zoran N., Puharić, Mirjana A., "Ruby laser beam interaction with ceramic and copper artifacts" in Journal of Russian Laser Research, 31 (2010):380-389,
https://doi.org/10.1007/s10946-010-9158-y . .

TY  - JOUR
AU  - Katavić, Boris T.
AU  - Ristić, Slavica S.
AU  - Polić-Radovanović, Suzana R.
AU  - Nikolić, Zoran N.
AU  - Puharić, Mirjana
AU  - Kutin, Marina M.
PY  - 2010
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/6056
AB  - U radu su prikazani rezultati delovanja laserske svetlosti, talasne dužine λ = 694,3 nm (rubinski laser, Q-switch mod), na uzorke od bakra i aluminijuma. Cilj ispitivanja je bio da se odrede maksimalne gustine energije laserskog snopa koje mogu da se koriste u dijagnostičke svrhe (interferometrijska snimanja, lasersko skeniranje, itd), kao i u uklanjanju depozita, a da pri tome snop ne stupa u interakciju sa osnovnim materijalom. Odabrani uzorci od bakra i aluminijuma bili su dugi niz godina izloženi atmosferskim uticajima. Rezultati delovanja laserske svetlosti ispitivani su skenirajućim elektronskim mikroskopom. Istraživanja su pokazala da je bezbedna granica
gustine energije rubinskog lasera za dijagnostičke metode za oba metalna uzorka do 20×103 J/m2.
AB  - Nondestructive methods are dominant in diagnosing the status and
protection of all kinds of contemporary industrial objects, as well as objects
of industrial heritage. Laser methods open wide possibilities of research
in the field of diagnosis and metal processing. This paper presents
the results of laser radiation interaction (wavelength λ = 694.3 nm, Ruby
laser, Q-switch mode) with metal samples covered with a deposit. The
goal of the examination was to determine the maximum energy density of
the ruby laser beam, that can be used in diagnostics purposes (interferometric
methods; 3D scanning) and as a tool for safe removal of deposits,
without interacting with the basic material. Microscopic examination performed
with SEM coupled with EDX allowed the determination of the safe
laser light energy density levels, which caused the removal of the deposite
from the surface of the sample, without degradation of the surface. The
energy density up to 20 kJ/m2 is the maximum allowed for diagnosis or
deposit removal.
PB  - Association of Chemical Engineers of Serbia
T2  - Hemijska industrija
T1  - Analiza praga oštećenja bakra i aluminijuma u interakciji sa rubinskim laserom
T1  - The analysis of damage threshold in ruby laser interaction with copper and aluminium
VL  - 64
IS  - 5
SP  - 447
EP  - 452
DO  - 10.2298/HEMIND100325042K
ER  - 

@article{
author = "Katavić, Boris T. and Ristić, Slavica S. and Polić-Radovanović, Suzana R. and Nikolić, Zoran N. and Puharić, Mirjana and Kutin, Marina M.",
year = "2010",
abstract = "U radu su prikazani rezultati delovanja laserske svetlosti, talasne dužine λ = 694,3 nm (rubinski laser, Q-switch mod), na uzorke od bakra i aluminijuma. Cilj ispitivanja je bio da se odrede maksimalne gustine energije laserskog snopa koje mogu da se koriste u dijagnostičke svrhe (interferometrijska snimanja, lasersko skeniranje, itd), kao i u uklanjanju depozita, a da pri tome snop ne stupa u interakciju sa osnovnim materijalom. Odabrani uzorci od bakra i aluminijuma bili su dugi niz godina izloženi atmosferskim uticajima. Rezultati delovanja laserske svetlosti ispitivani su skenirajućim elektronskim mikroskopom. Istraživanja su pokazala da je bezbedna granica
gustine energije rubinskog lasera za dijagnostičke metode za oba metalna uzorka do 20×103 J/m2., Nondestructive methods are dominant in diagnosing the status and
protection of all kinds of contemporary industrial objects, as well as objects
of industrial heritage. Laser methods open wide possibilities of research
in the field of diagnosis and metal processing. This paper presents
the results of laser radiation interaction (wavelength λ = 694.3 nm, Ruby
laser, Q-switch mode) with metal samples covered with a deposit. The
goal of the examination was to determine the maximum energy density of
the ruby laser beam, that can be used in diagnostics purposes (interferometric
methods; 3D scanning) and as a tool for safe removal of deposits,
without interacting with the basic material. Microscopic examination performed
with SEM coupled with EDX allowed the determination of the safe
laser light energy density levels, which caused the removal of the deposite
from the surface of the sample, without degradation of the surface. The
energy density up to 20 kJ/m2 is the maximum allowed for diagnosis or
deposit removal.",
publisher = "Association of Chemical Engineers of Serbia",
journal = "Hemijska industrija",
title = "Analiza praga oštećenja bakra i aluminijuma u interakciji sa rubinskim laserom, The analysis of damage threshold in ruby laser interaction with copper and aluminium",
volume = "64",
number = "5",
pages = "447-452",
doi = "10.2298/HEMIND100325042K"
}

Katavić, B. T., Ristić, S. S., Polić-Radovanović, S. R., Nikolić, Z. N., Puharić, M.,& Kutin, M. M.. (2010). Analiza praga oštećenja bakra i aluminijuma u interakciji sa rubinskim laserom. in Hemijska industrija
Association of Chemical Engineers of Serbia., 64(5), 447-452.
https://doi.org/10.2298/HEMIND100325042K

Katavić BT, Ristić SS, Polić-Radovanović SR, Nikolić ZN, Puharić M, Kutin MM. Analiza praga oštećenja bakra i aluminijuma u interakciji sa rubinskim laserom. in Hemijska industrija. 2010;64(5):447-452.
doi:10.2298/HEMIND100325042K .

Katavić, Boris T., Ristić, Slavica S., Polić-Radovanović, Suzana R., Nikolić, Zoran N., Puharić, Mirjana, Kutin, Marina M., "Analiza praga oštećenja bakra i aluminijuma u interakciji sa rubinskim laserom" in Hemijska industrija, 64, no. 5 (2010):447-452,
https://doi.org/10.2298/HEMIND100325042K . .

TY  - CONF
AU  - Ristić, Slavica
AU  - Srećković, Milesa
AU  - Polić-Radovanović, Suzana R.
AU  - Kutin, Marina
PY  - 2009
UR  - https://dais.sanu.ac.rs/123456789/124
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/6193
AB  - The effects of laser light and material interaction during the process of testing, processing and conservations of cultural heritage objects are very important concerning of the material characteristics preservation. Ruby and Nd3YAG lasers are very often used as light sources in a variety of optical recording and testing methods of cultural heritage items (eg interferometry). Special emphasis is give on the undesirable effects that may occur in the tests due to local laser beam focusing and to energy density increasing, as well as on the application of the laser processing, corrosion cleaning and material sintering.
PB  - Belgrade: Institute of Technical Sciences of the Serbian Academy of Sciences and Arts
C3  - Eleventh Annual Conference YUCOMAT 2009, Programme and The Book of Abstracts
T1  - The effects of laser light interactions with materials  of cultural heritage
SP  - 104
UR  - https://hdl.handle.net/21.15107/rcub_cer_6193
ER  - 

@conference{
author = "Ristić, Slavica and Srećković, Milesa and Polić-Radovanović, Suzana R. and Kutin, Marina",
year = "2009",
abstract = "The effects of laser light and material interaction during the process of testing, processing and conservations of cultural heritage objects are very important concerning of the material characteristics preservation. Ruby and Nd3YAG lasers are very often used as light sources in a variety of optical recording and testing methods of cultural heritage items (eg interferometry). Special emphasis is give on the undesirable effects that may occur in the tests due to local laser beam focusing and to energy density increasing, as well as on the application of the laser processing, corrosion cleaning and material sintering.",
publisher = "Belgrade: Institute of Technical Sciences of the Serbian Academy of Sciences and Arts",
journal = "Eleventh Annual Conference YUCOMAT 2009, Programme and The Book of Abstracts",
title = "The effects of laser light interactions with materials  of cultural heritage",
pages = "104",
url = "https://hdl.handle.net/21.15107/rcub_cer_6193"
}

Ristić, S., Srećković, M., Polić-Radovanović, S. R.,& Kutin, M.. (2009). The effects of laser light interactions with materials  of cultural heritage. in Eleventh Annual Conference YUCOMAT 2009, Programme and The Book of Abstracts
Belgrade: Institute of Technical Sciences of the Serbian Academy of Sciences and Arts., 104.
https://hdl.handle.net/21.15107/rcub_cer_6193

Ristić S, Srećković M, Polić-Radovanović SR, Kutin M. The effects of laser light interactions with materials  of cultural heritage. in Eleventh Annual Conference YUCOMAT 2009, Programme and The Book of Abstracts. 2009;:104.
https://hdl.handle.net/21.15107/rcub_cer_6193 .

Ristić, Slavica, Srećković, Milesa, Polić-Radovanović, Suzana R., Kutin, Marina, "The effects of laser light interactions with materials  of cultural heritage" in Eleventh Annual Conference YUCOMAT 2009, Programme and The Book of Abstracts (2009):104,
https://hdl.handle.net/21.15107/rcub_cer_6193 .

TY  - CONF
AU  - Milosavljević, Anđelka
AU  - Petronić, Sanja
AU  - Srećković, Milesa
AU  - Kovačević, Kata
AU  - Ostojić, Stanko
AU  - Kutin, Marina
AU  - Polić-Radovanović, Suzana R.
AU  - Đorđević, Dejan
AU  - Negovanović, Vitomir
AU  - Mirkov, Nikola
PY  - 2006
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/6222
AB  - Multicomponent nickel alloy, alloyed with: Mn, Cr, Al, Fe, B, Zr and others, was subjected after mechanical under the vacuum heat treatments: solution heat treatment at 1080oC for 1 hour, primary precipitation at 840 oC for 4 hours, secondary precipitation heat treatment at 760 oC for 3 hours and stress relief annealing at 700 oC for 1 hour. After heat treatment, laser surface treatment was applied and was related to the material deformation and damage formation on the material surface. Preliminary investigations were carried out by laser drilling and resulting traces on material were recorded by scanning electron microscope to find out the influence of different energies and pulse length on structural changes in the material.
PB  - Belgrade: Institute of Technical Sciences of the Serbian Academy of Sciences and Arts
C3  - Programme and the Book of Abstracts - Eighth Annual Conference YUCOMAT 2006,  September 4-8, 2006, Herceg Novi
T1  - Laser beam Induced Structural Changes in Multicomponent Nickels Alloys
VL  - VIII
SP  - 114
EP  - 114
UR  - https://hdl.handle.net/21.15107/rcub_cer_6222
ER  - 

@conference{
author = "Milosavljević, Anđelka and Petronić, Sanja and Srećković, Milesa and Kovačević, Kata and Ostojić, Stanko and Kutin, Marina and Polić-Radovanović, Suzana R. and Đorđević, Dejan and Negovanović, Vitomir and Mirkov, Nikola",
year = "2006",
abstract = "Multicomponent nickel alloy, alloyed with: Mn, Cr, Al, Fe, B, Zr and others, was subjected after mechanical under the vacuum heat treatments: solution heat treatment at 1080oC for 1 hour, primary precipitation at 840 oC for 4 hours, secondary precipitation heat treatment at 760 oC for 3 hours and stress relief annealing at 700 oC for 1 hour. After heat treatment, laser surface treatment was applied and was related to the material deformation and damage formation on the material surface. Preliminary investigations were carried out by laser drilling and resulting traces on material were recorded by scanning electron microscope to find out the influence of different energies and pulse length on structural changes in the material.",
publisher = "Belgrade: Institute of Technical Sciences of the Serbian Academy of Sciences and Arts",
journal = "Programme and the Book of Abstracts - Eighth Annual Conference YUCOMAT 2006,  September 4-8, 2006, Herceg Novi",
title = "Laser beam Induced Structural Changes in Multicomponent Nickels Alloys",
volume = "VIII",
pages = "114-114",
url = "https://hdl.handle.net/21.15107/rcub_cer_6222"
}

Milosavljević, A., Petronić, S., Srećković, M., Kovačević, K., Ostojić, S., Kutin, M., Polić-Radovanović, S. R., Đorđević, D., Negovanović, V.,& Mirkov, N.. (2006). Laser beam Induced Structural Changes in Multicomponent Nickels Alloys. in Programme and the Book of Abstracts - Eighth Annual Conference YUCOMAT 2006,  September 4-8, 2006, Herceg Novi
Belgrade: Institute of Technical Sciences of the Serbian Academy of Sciences and Arts., VIII, 114-114.
https://hdl.handle.net/21.15107/rcub_cer_6222

Milosavljević A, Petronić S, Srećković M, Kovačević K, Ostojić S, Kutin M, Polić-Radovanović SR, Đorđević D, Negovanović V, Mirkov N. Laser beam Induced Structural Changes in Multicomponent Nickels Alloys. in Programme and the Book of Abstracts - Eighth Annual Conference YUCOMAT 2006,  September 4-8, 2006, Herceg Novi. 2006;VIII:114-114.
https://hdl.handle.net/21.15107/rcub_cer_6222 .

Milosavljević, Anđelka, Petronić, Sanja, Srećković, Milesa, Kovačević, Kata, Ostojić, Stanko, Kutin, Marina, Polić-Radovanović, Suzana R., Đorđević, Dejan, Negovanović, Vitomir, Mirkov, Nikola, "Laser beam Induced Structural Changes in Multicomponent Nickels Alloys" in Programme and the Book of Abstracts - Eighth Annual Conference YUCOMAT 2006,  September 4-8, 2006, Herceg Novi, VIII (2006):114-114,
https://hdl.handle.net/21.15107/rcub_cer_6222 .

TY  - CONF
AU  - Radovanović, Radovan
AU  - Milosavljević, Anđelka
AU  - Milovanović, Andra
AU  - Kutin, Marina
AU  - Polić-Radovanović, Suzana R.
AU  - Radaković, Zoran
PY  - 2005
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/6401
AB  - Tests were performed on  aircraft  power  component  chambers  made  of  the  AlMgZn alloy. 
The chambers contained cracks or did not contain any cracks. The contemporary optical technique was applied in order to determine the stress distribution at a given pressure of 10 bar inside the chamber with or without  a crack. In addition to the experimental research, changes in the material were also evaluated by numerical methods.
PB  - London: Springer Nature
C3  - International Congres “Welding and Joining 2005: Frontiers of Materials Joining” 25–27 January 2005, Tel Aviv, Israel
T1  - Application of contemporary optical techniques for quality inspection of  structural parts produced of multicomponent aluminium alloys
VL  - 49
IS  - 3-4
SP  - 234
UR  - https://hdl.handle.net/21.15107/rcub_cer_6401
ER  - 

@conference{
author = "Radovanović, Radovan and Milosavljević, Anđelka and Milovanović, Andra and Kutin, Marina and Polić-Radovanović, Suzana R. and Radaković, Zoran",
year = "2005",
abstract = "Tests were performed on  aircraft  power  component  chambers  made  of  the  AlMgZn alloy. 
The chambers contained cracks or did not contain any cracks. The contemporary optical technique was applied in order to determine the stress distribution at a given pressure of 10 bar inside the chamber with or without  a crack. In addition to the experimental research, changes in the material were also evaluated by numerical methods.",
publisher = "London: Springer Nature",
journal = "International Congres “Welding and Joining 2005: Frontiers of Materials Joining” 25–27 January 2005, Tel Aviv, Israel",
title = "Application of contemporary optical techniques for quality inspection of  structural parts produced of multicomponent aluminium alloys",
volume = "49",
number = "3-4",
pages = "234",
url = "https://hdl.handle.net/21.15107/rcub_cer_6401"
}

Radovanović, R., Milosavljević, A., Milovanović, A., Kutin, M., Polić-Radovanović, S. R.,& Radaković, Z.. (2005). Application of contemporary optical techniques for quality inspection of  structural parts produced of multicomponent aluminium alloys. in International Congres “Welding and Joining 2005: Frontiers of Materials Joining” 25–27 January 2005, Tel Aviv, Israel
London: Springer Nature., 49(3-4), 234.
https://hdl.handle.net/21.15107/rcub_cer_6401

Radovanović R, Milosavljević A, Milovanović A, Kutin M, Polić-Radovanović SR, Radaković Z. Application of contemporary optical techniques for quality inspection of  structural parts produced of multicomponent aluminium alloys. in International Congres “Welding and Joining 2005: Frontiers of Materials Joining” 25–27 January 2005, Tel Aviv, Israel. 2005;49(3-4):234.
https://hdl.handle.net/21.15107/rcub_cer_6401 .

Radovanović, Radovan, Milosavljević, Anđelka, Milovanović, Andra, Kutin, Marina, Polić-Radovanović, Suzana R., Radaković, Zoran, "Application of contemporary optical techniques for quality inspection of  structural parts produced of multicomponent aluminium alloys" in International Congres “Welding and Joining 2005: Frontiers of Materials Joining” 25–27 January 2005, Tel Aviv, Israel, 49, no. 3-4 (2005):234,
https://hdl.handle.net/21.15107/rcub_cer_6401 .

TY  - CONF
AU  - Radovanović, Radovan
AU  - Milosavljević, Anđelka
AU  - Milovanović, Andra
AU  - Polić-Radovanović, Suzana R.
AU  - Radaković, Zoran
AU  - Kutin, Marina
PY  - 2005
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/6400
AB  - The    paper   presents   the    tested   mechanical    properties   and    determined   optimal
characteristics  of  the  multi-component  aluminium  alloy  that  are achieved by applying
Artificial aging for 30 min. At 190oC, after previously quenching  and  deforming  to 20%.
In   addition   to   the   optimal  mechanical  tests,  the  upper  mentioned  mechanical  heat
treatment   develops   optimal   resistance   to   corrosion   cracking   which  is  of  extreme
importance  in   the  exploatation  of   the  particular  structural  member  produced  of this
aluminium alloy. The  qualitative  and  quantitative  bases for the strain and stress analysis are obtained by applying the modern optical technique.
PB  - London: Springer Nature
C3  - International Congres “Welding and Joining 2005: Frontiers of Materials Joining” 25–27 January 2005, Tel Aviv, Israel
T1  - Testing a structural member with or without cracks produced of multi-component Aluminium alloy by applying contemporary optical techniques
VL  - 49
IS  - 3-4
SP  - 236
UR  - https://hdl.handle.net/21.15107/rcub_cer_6400
ER  - 

@conference{
author = "Radovanović, Radovan and Milosavljević, Anđelka and Milovanović, Andra and Polić-Radovanović, Suzana R. and Radaković, Zoran and Kutin, Marina",
year = "2005",
abstract = "The    paper   presents   the    tested   mechanical    properties   and    determined   optimal
characteristics  of  the  multi-component  aluminium  alloy  that  are achieved by applying
Artificial aging for 30 min. At 190oC, after previously quenching  and  deforming  to 20%.
In   addition   to   the   optimal  mechanical  tests,  the  upper  mentioned  mechanical  heat
treatment   develops   optimal   resistance   to   corrosion   cracking   which  is  of  extreme
importance  in   the  exploatation  of   the  particular  structural  member  produced  of this
aluminium alloy. The  qualitative  and  quantitative  bases for the strain and stress analysis are obtained by applying the modern optical technique.",
publisher = "London: Springer Nature",
journal = "International Congres “Welding and Joining 2005: Frontiers of Materials Joining” 25–27 January 2005, Tel Aviv, Israel",
title = "Testing a structural member with or without cracks produced of multi-component Aluminium alloy by applying contemporary optical techniques",
volume = "49",
number = "3-4",
pages = "236",
url = "https://hdl.handle.net/21.15107/rcub_cer_6400"
}

Radovanović, R., Milosavljević, A., Milovanović, A., Polić-Radovanović, S. R., Radaković, Z.,& Kutin, M.. (2005). Testing a structural member with or without cracks produced of multi-component Aluminium alloy by applying contemporary optical techniques. in International Congres “Welding and Joining 2005: Frontiers of Materials Joining” 25–27 January 2005, Tel Aviv, Israel
London: Springer Nature., 49(3-4), 236.
https://hdl.handle.net/21.15107/rcub_cer_6400

Radovanović R, Milosavljević A, Milovanović A, Polić-Radovanović SR, Radaković Z, Kutin M. Testing a structural member with or without cracks produced of multi-component Aluminium alloy by applying contemporary optical techniques. in International Congres “Welding and Joining 2005: Frontiers of Materials Joining” 25–27 January 2005, Tel Aviv, Israel. 2005;49(3-4):236.
https://hdl.handle.net/21.15107/rcub_cer_6400 .

Radovanović, Radovan, Milosavljević, Anđelka, Milovanović, Andra, Polić-Radovanović, Suzana R., Radaković, Zoran, Kutin, Marina, "Testing a structural member with or without cracks produced of multi-component Aluminium alloy by applying contemporary optical techniques" in International Congres “Welding and Joining 2005: Frontiers of Materials Joining” 25–27 January 2005, Tel Aviv, Israel, 49, no. 3-4 (2005):236,
https://hdl.handle.net/21.15107/rcub_cer_6400 .

TY  - CONF
AU  - Radovanović, Radovan
AU  - Milosavljević, Anđelka
AU  - Srećković, Milesa
AU  - Polić-Radovanović, Suzana R.
AU  - Jotić, Dragan
AU  - Kutin, Marina
AU  - Matić, Marija
PY  - 2001
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/6373
AB  - Bimetals – metal materials consisted of more layers-belong to the group of materials of intensive development. The essence of usage of bimetals lays within the possibility to unite the good qualities of 2 or more components in the new system, whose quality exceeds quality of each component. This paper considers experimental testing on bimetals of special use, especially the ones being used in industry of motor vehicles, as well as the air and the army industry. Fort he production of bimetals, hot-rolleda stell Č.0148 and brass Cu76Zn24Si0.5 have been used. These alloys have been treated with the thermic and thermo-mechanic treatments, and then they have been subjected under the laser treatment, with various dynamic working regimes of lasers (ruby laser, wave length λ= 694.3 x 10-9m, Q-swich). Structural changes, upon applied treatments, have been monitored with optical, transmission and scanning microscopes. Based on microphotography and the results of obtained mechanical characteristics, different terms been defined and they are of great significance in means of obtaining the optimal characteristics of treated alloys.
PB  - Belgrade: Institute of Technical Sciences of the Serbian Academy of Sciences and Arts
C3  - Programme and The Book of Abstracts - Fourth Yugoslav Materials Research Society Conference YUCOMAT 2001
T1  - Performance of bimetal materials under the various conditions of laser treatments
SP  - 9
UR  - https://hdl.handle.net/21.15107/rcub_cer_6373
ER  - 

@conference{
author = "Radovanović, Radovan and Milosavljević, Anđelka and Srećković, Milesa and Polić-Radovanović, Suzana R. and Jotić, Dragan and Kutin, Marina and Matić, Marija",
year = "2001",
abstract = "Bimetals – metal materials consisted of more layers-belong to the group of materials of intensive development. The essence of usage of bimetals lays within the possibility to unite the good qualities of 2 or more components in the new system, whose quality exceeds quality of each component. This paper considers experimental testing on bimetals of special use, especially the ones being used in industry of motor vehicles, as well as the air and the army industry. Fort he production of bimetals, hot-rolleda stell Č.0148 and brass Cu76Zn24Si0.5 have been used. These alloys have been treated with the thermic and thermo-mechanic treatments, and then they have been subjected under the laser treatment, with various dynamic working regimes of lasers (ruby laser, wave length λ= 694.3 x 10-9m, Q-swich). Structural changes, upon applied treatments, have been monitored with optical, transmission and scanning microscopes. Based on microphotography and the results of obtained mechanical characteristics, different terms been defined and they are of great significance in means of obtaining the optimal characteristics of treated alloys.",
publisher = "Belgrade: Institute of Technical Sciences of the Serbian Academy of Sciences and Arts",
journal = "Programme and The Book of Abstracts - Fourth Yugoslav Materials Research Society Conference YUCOMAT 2001",
title = "Performance of bimetal materials under the various conditions of laser treatments",
pages = "9",
url = "https://hdl.handle.net/21.15107/rcub_cer_6373"
}

Radovanović, R., Milosavljević, A., Srećković, M., Polić-Radovanović, S. R., Jotić, D., Kutin, M.,& Matić, M.. (2001). Performance of bimetal materials under the various conditions of laser treatments. in Programme and The Book of Abstracts - Fourth Yugoslav Materials Research Society Conference YUCOMAT 2001
Belgrade: Institute of Technical Sciences of the Serbian Academy of Sciences and Arts., 9.
https://hdl.handle.net/21.15107/rcub_cer_6373

Radovanović R, Milosavljević A, Srećković M, Polić-Radovanović SR, Jotić D, Kutin M, Matić M. Performance of bimetal materials under the various conditions of laser treatments. in Programme and The Book of Abstracts - Fourth Yugoslav Materials Research Society Conference YUCOMAT 2001. 2001;:9.
https://hdl.handle.net/21.15107/rcub_cer_6373 .

Radovanović, Radovan, Milosavljević, Anđelka, Srećković, Milesa, Polić-Radovanović, Suzana R., Jotić, Dragan, Kutin, Marina, Matić, Marija, "Performance of bimetal materials under the various conditions of laser treatments" in Programme and The Book of Abstracts - Fourth Yugoslav Materials Research Society Conference YUCOMAT 2001 (2001):9,
https://hdl.handle.net/21.15107/rcub_cer_6373 .