TY  - JOUR
AU  - Šuljagić, Marija
AU  - Petronijević, Ivan
AU  - Mirković, Miljana
AU  - Kremenović, Aleksandar
AU  - Džunuzović, Adis
AU  - Pavlović, Vladimir B.
AU  - Kalezić-Glišović, Aleksandra
AU  - Anđelković, Ljubica
PY  - 2023
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/5865
AB  - To investigate the influence of spinel structure and sintering temperature on the functional properties of BaTiO3/NixZn1−xFe2O4 (x = 0, 0.5, 1), NiFe2O4, ZnFe2O4, and Ni0.5Zn0.5Fe2O4 were in situ prepared by thermal decomposition onto BaTiO3 surface from acetylacetonate precursors. As-prepared powders were additionally sintered at 1150 °C and 1300 °C. X-ray powder diffraction (XRPD) and scanning electron microscopy (SEM) coupled with electron dispersive spectroscopy (EDS) were used for the detailed examination of phase composition and morphology. The magnetic, dielectric, and ferroelectric properties were investigated. The optimal phase composition in the BaTiO3/NiFe2O4 composite, sintered at 1150 °C, resulted in a wide frequency range stability. Additionally, particular phase composition indicates favorable properties such as low conductivity and ideal-like hysteresis loop behavior. The favorable properties of BaTiO3/NiFe2O4 make this particular composite an ideal material choice for further studies on applications of multi-ferroic devices.
PB  - MDPI
T2  - Inorganics
T1  - BaTiO3/NixZn1−xFe2O4 (x = 0, 0.5, 1) Composites Synthesized by Thermal Decomposition: Magnetic, Dielectric and Ferroelectric Properties
VL  - 11
IS  - 2
SP  - 51
DO  - 10.3390/inorganics11020051
ER  - 

@article{
author = "Šuljagić, Marija and Petronijević, Ivan and Mirković, Miljana and Kremenović, Aleksandar and Džunuzović, Adis and Pavlović, Vladimir B. and Kalezić-Glišović, Aleksandra and Anđelković, Ljubica",
year = "2023",
abstract = "To investigate the influence of spinel structure and sintering temperature on the functional properties of BaTiO3/NixZn1−xFe2O4 (x = 0, 0.5, 1), NiFe2O4, ZnFe2O4, and Ni0.5Zn0.5Fe2O4 were in situ prepared by thermal decomposition onto BaTiO3 surface from acetylacetonate precursors. As-prepared powders were additionally sintered at 1150 °C and 1300 °C. X-ray powder diffraction (XRPD) and scanning electron microscopy (SEM) coupled with electron dispersive spectroscopy (EDS) were used for the detailed examination of phase composition and morphology. The magnetic, dielectric, and ferroelectric properties were investigated. The optimal phase composition in the BaTiO3/NiFe2O4 composite, sintered at 1150 °C, resulted in a wide frequency range stability. Additionally, particular phase composition indicates favorable properties such as low conductivity and ideal-like hysteresis loop behavior. The favorable properties of BaTiO3/NiFe2O4 make this particular composite an ideal material choice for further studies on applications of multi-ferroic devices.",
publisher = "MDPI",
journal = "Inorganics",
title = "BaTiO3/NixZn1−xFe2O4 (x = 0, 0.5, 1) Composites Synthesized by Thermal Decomposition: Magnetic, Dielectric and Ferroelectric Properties",
volume = "11",
number = "2",
pages = "51",
doi = "10.3390/inorganics11020051"
}

Šuljagić, M., Petronijević, I., Mirković, M., Kremenović, A., Džunuzović, A., Pavlović, V. B., Kalezić-Glišović, A.,& Anđelković, L.. (2023). BaTiO3/NixZn1−xFe2O4 (x = 0, 0.5, 1) Composites Synthesized by Thermal Decomposition: Magnetic, Dielectric and Ferroelectric Properties. in Inorganics
MDPI., 11(2), 51.
https://doi.org/10.3390/inorganics11020051

Šuljagić M, Petronijević I, Mirković M, Kremenović A, Džunuzović A, Pavlović VB, Kalezić-Glišović A, Anđelković L. BaTiO3/NixZn1−xFe2O4 (x = 0, 0.5, 1) Composites Synthesized by Thermal Decomposition: Magnetic, Dielectric and Ferroelectric Properties. in Inorganics. 2023;11(2):51.
doi:10.3390/inorganics11020051 .

Šuljagić, Marija, Petronijević, Ivan, Mirković, Miljana, Kremenović, Aleksandar, Džunuzović, Adis, Pavlović, Vladimir B., Kalezić-Glišović, Aleksandra, Anđelković, Ljubica, "BaTiO3/NixZn1−xFe2O4 (x = 0, 0.5, 1) Composites Synthesized by Thermal Decomposition: Magnetic, Dielectric and Ferroelectric Properties" in Inorganics, 11, no. 2 (2023):51,
https://doi.org/10.3390/inorganics11020051 . .

TY  - CONF
AU  - Šuljagić, Marija
AU  - Petronijević, Ivan
AU  - Mirković, Miljana
AU  - Kremenović, Aleksandar
AU  - Džunuzović, Adis
AU  - Pavlović, Vladimir
AU  - Kalezić-Glišović, Aleksandra
AU  - Anđelković, Ljubica
PY  - 2023
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/6328
AB  - In order to examine the influence of phase composition and sintering temperature on the functional properties of perovskite/spinel composites, BaTiO3/NixZn1−xFe2O4 (x = 0, 0.5, 1), NiFe2O4, ZnFe2O4, and Ni0.5Zn0.5Fe2O4 were in situ prepared by thermal decomposition onto BaTiO3 surface. Acetylacetonate complexes were used as the precursors. The obtained powders were compressed to pellets and sintered at 1150 °C and 1300 °C. X-ray powder diffraction (XRPD) and scanning electron microscopy (SEM) coupled with electron dispersive spectroscopy (EDS) were used for the comprehensive investigation of phase composition and morphology. The magnetic, dielectric, and ferroelectric properties were performed in detail. The optimal phase composition was found in the BaTiO3/NiFe2O4 composite sintered at 1150 °C, which resulted in a wide frequency range stability. Furthermore, particular phase composition led to suitable properties such as low conductivity and ideal-like hysteresis loop behavior [1]. These functional properties of BaTiO3/NiFe2O4 make this composite a “material of choice“ for further studies on applications of multiferroic devices.
AB  - U cilju ispitivanja uticaja faznog sastava i temperature sinterovanja na funkcionalna svojstva perovskit/spinel kompozita BaTiO3/NixZn1−xFe2O4 (x = 0, 0,5, 1), NiFe2O4, ZnFe2O4, i Ni0,5Zn0,5Fe2O4 pripremljeni su in situ metodom termalne dekompozicije. U sintezi su korišćeni acetilacetonatni kompleksi kao prekursori. Dobijeni prahovi su komprimovani u tablete i sinterovani na 1150 °C i 1300 °C. Za detaljno ispitivanje faznog sastava i morfologije sintetisanih kompozita korišćene su metode rendgenske difrakcije praha (XRPD) i skenirajuće elektronske mikroskopije (SEM) spregnute sa energetsko disperzivnom spektroskopijom (EDS). Ispitivana su i magnetna, dielektrična i feroelektrična svojstva sinterovanih kompozita. Ustanovljeno je da optimalni fazni sastav pronađen kod kompozita BaTiO3/NiFe2O4 sinterovanog na 1150 °C dovodi do stabilnosti u širokom opsegu frekvencija. Optimalni fazni sastav pomenutog kompozita povoljno je uticao na funkcionalna svojstva kao što su niska provodnost i feroelektrično ponašenje koje se ogleda u zadovoljavajućem izgledu histerezisa [1]. Ova svojstva nedvosmisleno ukazuju da je kompozit BaTiO3/NiFe2O4 odgovarajući izbor za dalja istraživanja posvećena primeni multiferoičnih materijala.
PB  - Belgrade, Serbia : Serbian Cristallographic Soceity / Beograd, Srbija : Srpsko kristalografsko društvo
C3  - 28th Conference of the Serbian Crystallographic Society - Abstracts, June 14–15th, 2023 Čačak, Serbia / XXVIII Konferencija Srpskog kristalografskog društva - Izvodi radova, Jun 14–15, 2023 Čačak, Srbija
T1  - BaTiO3/NixZn1-xFe2O4 (x =0, 0.5, 1) composites synthesized by thermal decomposition: The influence of phase composition and sintering temperature on their physical properties
T1  - Uticaj faznog sastava i temperature sinterovanja na fizička svojstva BaTiO3/NixZn1-xFe2O4 (x =0, 0.5, 1) kompozita sintetisanih metodom termalne dekompozicije
SP  - 36
EP  - 37
UR  - https://hdl.handle.net/21.15107/rcub_cer_6328
ER  - 

@conference{
author = "Šuljagić, Marija and Petronijević, Ivan and Mirković, Miljana and Kremenović, Aleksandar and Džunuzović, Adis and Pavlović, Vladimir and Kalezić-Glišović, Aleksandra and Anđelković, Ljubica",
year = "2023",
abstract = "In order to examine the influence of phase composition and sintering temperature on the functional properties of perovskite/spinel composites, BaTiO3/NixZn1−xFe2O4 (x = 0, 0.5, 1), NiFe2O4, ZnFe2O4, and Ni0.5Zn0.5Fe2O4 were in situ prepared by thermal decomposition onto BaTiO3 surface. Acetylacetonate complexes were used as the precursors. The obtained powders were compressed to pellets and sintered at 1150 °C and 1300 °C. X-ray powder diffraction (XRPD) and scanning electron microscopy (SEM) coupled with electron dispersive spectroscopy (EDS) were used for the comprehensive investigation of phase composition and morphology. The magnetic, dielectric, and ferroelectric properties were performed in detail. The optimal phase composition was found in the BaTiO3/NiFe2O4 composite sintered at 1150 °C, which resulted in a wide frequency range stability. Furthermore, particular phase composition led to suitable properties such as low conductivity and ideal-like hysteresis loop behavior [1]. These functional properties of BaTiO3/NiFe2O4 make this composite a “material of choice“ for further studies on applications of multiferroic devices., U cilju ispitivanja uticaja faznog sastava i temperature sinterovanja na funkcionalna svojstva perovskit/spinel kompozita BaTiO3/NixZn1−xFe2O4 (x = 0, 0,5, 1), NiFe2O4, ZnFe2O4, i Ni0,5Zn0,5Fe2O4 pripremljeni su in situ metodom termalne dekompozicije. U sintezi su korišćeni acetilacetonatni kompleksi kao prekursori. Dobijeni prahovi su komprimovani u tablete i sinterovani na 1150 °C i 1300 °C. Za detaljno ispitivanje faznog sastava i morfologije sintetisanih kompozita korišćene su metode rendgenske difrakcije praha (XRPD) i skenirajuće elektronske mikroskopije (SEM) spregnute sa energetsko disperzivnom spektroskopijom (EDS). Ispitivana su i magnetna, dielektrična i feroelektrična svojstva sinterovanih kompozita. Ustanovljeno je da optimalni fazni sastav pronađen kod kompozita BaTiO3/NiFe2O4 sinterovanog na 1150 °C dovodi do stabilnosti u širokom opsegu frekvencija. Optimalni fazni sastav pomenutog kompozita povoljno je uticao na funkcionalna svojstva kao što su niska provodnost i feroelektrično ponašenje koje se ogleda u zadovoljavajućem izgledu histerezisa [1]. Ova svojstva nedvosmisleno ukazuju da je kompozit BaTiO3/NiFe2O4 odgovarajući izbor za dalja istraživanja posvećena primeni multiferoičnih materijala.",
publisher = "Belgrade, Serbia : Serbian Cristallographic Soceity / Beograd, Srbija : Srpsko kristalografsko društvo",
journal = "28th Conference of the Serbian Crystallographic Society - Abstracts, June 14–15th, 2023 Čačak, Serbia / XXVIII Konferencija Srpskog kristalografskog društva - Izvodi radova, Jun 14–15, 2023 Čačak, Srbija",
title = "BaTiO3/NixZn1-xFe2O4 (x =0, 0.5, 1) composites synthesized by thermal decomposition: The influence of phase composition and sintering temperature on their physical properties, Uticaj faznog sastava i temperature sinterovanja na fizička svojstva BaTiO3/NixZn1-xFe2O4 (x =0, 0.5, 1) kompozita sintetisanih metodom termalne dekompozicije",
pages = "36-37",
url = "https://hdl.handle.net/21.15107/rcub_cer_6328"
}

Šuljagić, M., Petronijević, I., Mirković, M., Kremenović, A., Džunuzović, A., Pavlović, V., Kalezić-Glišović, A.,& Anđelković, L.. (2023). BaTiO3/NixZn1-xFe2O4 (x =0, 0.5, 1) composites synthesized by thermal decomposition: The influence of phase composition and sintering temperature on their physical properties. in 28th Conference of the Serbian Crystallographic Society - Abstracts, June 14–15th, 2023 Čačak, Serbia / XXVIII Konferencija Srpskog kristalografskog društva - Izvodi radova, Jun 14–15, 2023 Čačak, Srbija
Belgrade, Serbia : Serbian Cristallographic Soceity / Beograd, Srbija : Srpsko kristalografsko društvo., 36-37.
https://hdl.handle.net/21.15107/rcub_cer_6328

Šuljagić M, Petronijević I, Mirković M, Kremenović A, Džunuzović A, Pavlović V, Kalezić-Glišović A, Anđelković L. BaTiO3/NixZn1-xFe2O4 (x =0, 0.5, 1) composites synthesized by thermal decomposition: The influence of phase composition and sintering temperature on their physical properties. in 28th Conference of the Serbian Crystallographic Society - Abstracts, June 14–15th, 2023 Čačak, Serbia / XXVIII Konferencija Srpskog kristalografskog društva - Izvodi radova, Jun 14–15, 2023 Čačak, Srbija. 2023;:36-37.
https://hdl.handle.net/21.15107/rcub_cer_6328 .

Šuljagić, Marija, Petronijević, Ivan, Mirković, Miljana, Kremenović, Aleksandar, Džunuzović, Adis, Pavlović, Vladimir, Kalezić-Glišović, Aleksandra, Anđelković, Ljubica, "BaTiO3/NixZn1-xFe2O4 (x =0, 0.5, 1) composites synthesized by thermal decomposition: The influence of phase composition and sintering temperature on their physical properties" in 28th Conference of the Serbian Crystallographic Society - Abstracts, June 14–15th, 2023 Čačak, Serbia / XXVIII Konferencija Srpskog kristalografskog društva - Izvodi radova, Jun 14–15, 2023 Čačak, Srbija (2023):36-37,
https://hdl.handle.net/21.15107/rcub_cer_6328 .