TY  - JOUR
AU  - Dolic, Maja B.
AU  - Rajakovic-Ognjanovic, Vladana N.
AU  - Štrbac, Svetlana
AU  - Dimitrijević, Suzana I.
AU  - Mitrić, Miodrag
AU  - Onjia, Antonije E.
AU  - Rajaković, Ljubinka V.
PY  - 2017
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/3030
AB  - The objective of this study was to investigate the modification of materials used in wastewater treatment for possible antimicrobial application(s). Granulated activated carbon (GAC) and natural clinoptilolite (CLI) were activated using Cu2+-and Zn2+-ions and the disinfection ability of the resulting materials was tested. Studies of the sorption and desorption kinetics were performed in order to determine and clarify the antimicrobial activity of the metal-activated sorbents. The exact sorption capacities of the selected sorbents, GAC and CLI, activated through use of Cu2+-ions, were 15.90 and 3.60 mg/g, respectively, while for the materials activated by Zn2+-ions, the corresponding capacities were 14.00 and 4.72 mg/g,. The desorption rates were 2 and 3 orders of magnitude lower than their sorption efficacy for the Cu2+-, and Zn2+-activated sorbents, respectively. The intermediate sorption capacity and low desorption rate indicated that the overall antimicrobial activity of the metal-modified sorbents was a result of metal ions immobilized onto surface sites. The effect of antimicrobial activity of free ions desorbed from the metal-activated surface may thus be disregarded. The antimicrobial activities of Cu/GAC, Zn/GAC, Cu/CLI and Zn/ CLI were also tested against Escherichia coli, Staphylococcus aureus, and Candida albicans. After 15 min exposure, the highest levels of cell inactivation were obtained through the Cu/CLI and the Cu/GAC against E. coli, 100.0 and 98.24%, respectively. However, for S. aureus and yeast cell inactivation, all Cu2+-and Zn2+-activated sorbents proved to be unsatisfactory. A characterization of the sorbents was performed by Xray diffraction (XRD), X-ray photo electron spectroscopy (XPS), and field emission scanning electron microscopy (FE-SEM). A concentration of the adsorbed and released ions was determined by inductively coupled plasma-optical emission spectroscopy (ICP-OES) and mass spectrometry (ICP-MS). The results showed that the antimicrobial performance of the activated sorbents depended on the surface characteristics of the material, which itself designates the distribution and the bioavailability of the activating agent.
PB  - Elsevier
T2  - New Biotechnology
T1  - Natural sorbents modified by divalent Cu2+- and Zn2+- ions and their corresponding antimicrobial activity
VL  - 39
SP  - 150
EP  - 159
DO  - 10.1016/j.nbt.2017.03.001
ER  - 

@article{
author = "Dolic, Maja B. and Rajakovic-Ognjanovic, Vladana N. and Štrbac, Svetlana and Dimitrijević, Suzana I. and Mitrić, Miodrag and Onjia, Antonije E. and Rajaković, Ljubinka V.",
year = "2017",
abstract = "The objective of this study was to investigate the modification of materials used in wastewater treatment for possible antimicrobial application(s). Granulated activated carbon (GAC) and natural clinoptilolite (CLI) were activated using Cu2+-and Zn2+-ions and the disinfection ability of the resulting materials was tested. Studies of the sorption and desorption kinetics were performed in order to determine and clarify the antimicrobial activity of the metal-activated sorbents. The exact sorption capacities of the selected sorbents, GAC and CLI, activated through use of Cu2+-ions, were 15.90 and 3.60 mg/g, respectively, while for the materials activated by Zn2+-ions, the corresponding capacities were 14.00 and 4.72 mg/g,. The desorption rates were 2 and 3 orders of magnitude lower than their sorption efficacy for the Cu2+-, and Zn2+-activated sorbents, respectively. The intermediate sorption capacity and low desorption rate indicated that the overall antimicrobial activity of the metal-modified sorbents was a result of metal ions immobilized onto surface sites. The effect of antimicrobial activity of free ions desorbed from the metal-activated surface may thus be disregarded. The antimicrobial activities of Cu/GAC, Zn/GAC, Cu/CLI and Zn/ CLI were also tested against Escherichia coli, Staphylococcus aureus, and Candida albicans. After 15 min exposure, the highest levels of cell inactivation were obtained through the Cu/CLI and the Cu/GAC against E. coli, 100.0 and 98.24%, respectively. However, for S. aureus and yeast cell inactivation, all Cu2+-and Zn2+-activated sorbents proved to be unsatisfactory. A characterization of the sorbents was performed by Xray diffraction (XRD), X-ray photo electron spectroscopy (XPS), and field emission scanning electron microscopy (FE-SEM). A concentration of the adsorbed and released ions was determined by inductively coupled plasma-optical emission spectroscopy (ICP-OES) and mass spectrometry (ICP-MS). The results showed that the antimicrobial performance of the activated sorbents depended on the surface characteristics of the material, which itself designates the distribution and the bioavailability of the activating agent.",
publisher = "Elsevier",
journal = "New Biotechnology",
title = "Natural sorbents modified by divalent Cu2+- and Zn2+- ions and their corresponding antimicrobial activity",
volume = "39",
pages = "150-159",
doi = "10.1016/j.nbt.2017.03.001"
}

Dolic, M. B., Rajakovic-Ognjanovic, V. N., Štrbac, S., Dimitrijević, S. I., Mitrić, M., Onjia, A. E.,& Rajaković, L. V.. (2017). Natural sorbents modified by divalent Cu2+- and Zn2+- ions and their corresponding antimicrobial activity. in New Biotechnology
Elsevier., 39, 150-159.
https://doi.org/10.1016/j.nbt.2017.03.001

Dolic MB, Rajakovic-Ognjanovic VN, Štrbac S, Dimitrijević SI, Mitrić M, Onjia AE, Rajaković LV. Natural sorbents modified by divalent Cu2+- and Zn2+- ions and their corresponding antimicrobial activity. in New Biotechnology. 2017;39:150-159.
doi:10.1016/j.nbt.2017.03.001 .

Dolic, Maja B., Rajakovic-Ognjanovic, Vladana N., Štrbac, Svetlana, Dimitrijević, Suzana I., Mitrić, Miodrag, Onjia, Antonije E., Rajaković, Ljubinka V., "Natural sorbents modified by divalent Cu2+- and Zn2+- ions and their corresponding antimicrobial activity" in New Biotechnology, 39 (2017):150-159,
https://doi.org/10.1016/j.nbt.2017.03.001 . .

TY  - JOUR
AU  - Dolic, Maja B.
AU  - Rajakovic-Ognjanovic, Vladana N.
AU  - Štrbac, Svetlana
AU  - Dimitrijević, Suzana I.
AU  - Mitrić, Miodrag
AU  - Onjia, Antonije E.
AU  - Rajaković, Ljubinka V.
PY  - 2017
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/2158
AB  - The objective of this study was to investigate the modification of materials used in wastewater treatment for possible antimicrobial application(s). Granulated activated carbon (GAC) and natural clinoptilolite (CLI) were activated using Cu2+-and Zn2+-ions and the disinfection ability of the resulting materials was tested. Studies of the sorption and desorption kinetics were performed in order to determine and clarify the antimicrobial activity of the metal-activated sorbents. The exact sorption capacities of the selected sorbents, GAC and CLI, activated through use of Cu2+-ions, were 15.90 and 3.60 mg/g, respectively, while for the materials activated by Zn2+-ions, the corresponding capacities were 14.00 and 4.72 mg/g,. The desorption rates were 2 and 3 orders of magnitude lower than their sorption efficacy for the Cu2+-, and Zn2+-activated sorbents, respectively. The intermediate sorption capacity and low desorption rate indicated that the overall antimicrobial activity of the metal-modified sorbents was a result of metal ions immobilized onto surface sites. The effect of antimicrobial activity of free ions desorbed from the metal-activated surface may thus be disregarded. The antimicrobial activities of Cu/GAC, Zn/GAC, Cu/CLI and Zn/ CLI were also tested against Escherichia coli, Staphylococcus aureus, and Candida albicans. After 15 min exposure, the highest levels of cell inactivation were obtained through the Cu/CLI and the Cu/GAC against E. coli, 100.0 and 98.24%, respectively. However, for S. aureus and yeast cell inactivation, all Cu2+-and Zn2+-activated sorbents proved to be unsatisfactory. A characterization of the sorbents was performed by Xray diffraction (XRD), X-ray photo electron spectroscopy (XPS), and field emission scanning electron microscopy (FE-SEM). A concentration of the adsorbed and released ions was determined by inductively coupled plasma-optical emission spectroscopy (ICP-OES) and mass spectrometry (ICP-MS). The results showed that the antimicrobial performance of the activated sorbents depended on the surface characteristics of the material, which itself designates the distribution and the bioavailability of the activating agent.
PB  - Elsevier
T2  - New Biotechnology
T1  - Natural sorbents modified by divalent Cu2+- and Zn2+- ions and their corresponding antimicrobial activity
VL  - 39
SP  - 150
EP  - 159
DO  - 10.1016/j.nbt.2017.03.001
ER  - 

@article{
author = "Dolic, Maja B. and Rajakovic-Ognjanovic, Vladana N. and Štrbac, Svetlana and Dimitrijević, Suzana I. and Mitrić, Miodrag and Onjia, Antonije E. and Rajaković, Ljubinka V.",
year = "2017",
abstract = "The objective of this study was to investigate the modification of materials used in wastewater treatment for possible antimicrobial application(s). Granulated activated carbon (GAC) and natural clinoptilolite (CLI) were activated using Cu2+-and Zn2+-ions and the disinfection ability of the resulting materials was tested. Studies of the sorption and desorption kinetics were performed in order to determine and clarify the antimicrobial activity of the metal-activated sorbents. The exact sorption capacities of the selected sorbents, GAC and CLI, activated through use of Cu2+-ions, were 15.90 and 3.60 mg/g, respectively, while for the materials activated by Zn2+-ions, the corresponding capacities were 14.00 and 4.72 mg/g,. The desorption rates were 2 and 3 orders of magnitude lower than their sorption efficacy for the Cu2+-, and Zn2+-activated sorbents, respectively. The intermediate sorption capacity and low desorption rate indicated that the overall antimicrobial activity of the metal-modified sorbents was a result of metal ions immobilized onto surface sites. The effect of antimicrobial activity of free ions desorbed from the metal-activated surface may thus be disregarded. The antimicrobial activities of Cu/GAC, Zn/GAC, Cu/CLI and Zn/ CLI were also tested against Escherichia coli, Staphylococcus aureus, and Candida albicans. After 15 min exposure, the highest levels of cell inactivation were obtained through the Cu/CLI and the Cu/GAC against E. coli, 100.0 and 98.24%, respectively. However, for S. aureus and yeast cell inactivation, all Cu2+-and Zn2+-activated sorbents proved to be unsatisfactory. A characterization of the sorbents was performed by Xray diffraction (XRD), X-ray photo electron spectroscopy (XPS), and field emission scanning electron microscopy (FE-SEM). A concentration of the adsorbed and released ions was determined by inductively coupled plasma-optical emission spectroscopy (ICP-OES) and mass spectrometry (ICP-MS). The results showed that the antimicrobial performance of the activated sorbents depended on the surface characteristics of the material, which itself designates the distribution and the bioavailability of the activating agent.",
publisher = "Elsevier",
journal = "New Biotechnology",
title = "Natural sorbents modified by divalent Cu2+- and Zn2+- ions and their corresponding antimicrobial activity",
volume = "39",
pages = "150-159",
doi = "10.1016/j.nbt.2017.03.001"
}

Dolic, M. B., Rajakovic-Ognjanovic, V. N., Štrbac, S., Dimitrijević, S. I., Mitrić, M., Onjia, A. E.,& Rajaković, L. V.. (2017). Natural sorbents modified by divalent Cu2+- and Zn2+- ions and their corresponding antimicrobial activity. in New Biotechnology
Elsevier., 39, 150-159.
https://doi.org/10.1016/j.nbt.2017.03.001

Dolic MB, Rajakovic-Ognjanovic VN, Štrbac S, Dimitrijević SI, Mitrić M, Onjia AE, Rajaković LV. Natural sorbents modified by divalent Cu2+- and Zn2+- ions and their corresponding antimicrobial activity. in New Biotechnology. 2017;39:150-159.
doi:10.1016/j.nbt.2017.03.001 .

Dolic, Maja B., Rajakovic-Ognjanovic, Vladana N., Štrbac, Svetlana, Dimitrijević, Suzana I., Mitrić, Miodrag, Onjia, Antonije E., Rajaković, Ljubinka V., "Natural sorbents modified by divalent Cu2+- and Zn2+- ions and their corresponding antimicrobial activity" in New Biotechnology, 39 (2017):150-159,
https://doi.org/10.1016/j.nbt.2017.03.001 . .

TY  - JOUR
AU  - Dolic, Maja B
AU  - Rajakovic-Ognjanovic, Vladana N
AU  - Štrbac, Svetlana
AU  - Rakočević, Zlatko Lj.
AU  - Veljović, Đorđe
AU  - Dimitrijević, Suzana I.
AU  - Rajaković, Ljubinka V.
PY  - 2015
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/1791
AB  - This study is focused on the surface modifications of the materials that are used for antimicrobial water treatment. Sorbents of different origin were activated by Ag+-ions. The selection of the most appropriate materials and the most effective activation agents was done according to the results of the sorption and desorption kinetic studies. Sorption capacities of selected sorbents: granulated activated carbon (GAC), zeolite (Z), and titanium dioxide (T), activated by Ag+-ions were following: 42.06, 13.51 and 17.53 mg/g, respectively. The antimicrobial activity of Ag/Z, Ag/GAC and Ag/T sorbents were tested against Gram-negative bacteria E. coli, Gram-positive bacteria S. aureus and yeast C. albicans. After 15 min of exposure period, the highest cell removal was obtained using Ag/Z against S. aureus and E. coli, 98.8 and 93.5%, respectively. Yeast cell inactivation was unsatisfactory for all three activated sorbents. The antimicrobial pathway of the activated sorbents has been examined by two separate tests - Ag+-ions desorbed from the activated surface to the aqueous phase and microbial cell removal caused by the Ag+-ions from the solid phase (activated surface sites). The results indicated that disinfection process significantly depended on the microbial-activated sites interactions on the modified surface. The chemical state of the activating agent had crucial impact to the inhibition rate. The characterization of the native and modified sorbents was performed by X-ray diffraction technique, X-ray photoelectron spectroscopy and scanning electron microscope. The concentration of adsorbed and released ions was determined by inductively coupled plasma optical emission spectroscopy and mass spectrometry. The antimicrobial efficiency of activated sorbents was related not only to the concentration of the activating agent, but moreover on the surface characteristics of the material, which affects the distribution and the accessibility of the activating agent.
PB  - Elsevier
T2  - Applied Surface Science
T1  - The antimicrobial efficiency of silver activated sorbents
VL  - 357
SP  - 819
EP  - 831
DO  - 10.1016/j.apsusc.2015.09.032
ER  - 

@article{
author = "Dolic, Maja B and Rajakovic-Ognjanovic, Vladana N and Štrbac, Svetlana and Rakočević, Zlatko Lj. and Veljović, Đorđe and Dimitrijević, Suzana I. and Rajaković, Ljubinka V.",
year = "2015",
abstract = "This study is focused on the surface modifications of the materials that are used for antimicrobial water treatment. Sorbents of different origin were activated by Ag+-ions. The selection of the most appropriate materials and the most effective activation agents was done according to the results of the sorption and desorption kinetic studies. Sorption capacities of selected sorbents: granulated activated carbon (GAC), zeolite (Z), and titanium dioxide (T), activated by Ag+-ions were following: 42.06, 13.51 and 17.53 mg/g, respectively. The antimicrobial activity of Ag/Z, Ag/GAC and Ag/T sorbents were tested against Gram-negative bacteria E. coli, Gram-positive bacteria S. aureus and yeast C. albicans. After 15 min of exposure period, the highest cell removal was obtained using Ag/Z against S. aureus and E. coli, 98.8 and 93.5%, respectively. Yeast cell inactivation was unsatisfactory for all three activated sorbents. The antimicrobial pathway of the activated sorbents has been examined by two separate tests - Ag+-ions desorbed from the activated surface to the aqueous phase and microbial cell removal caused by the Ag+-ions from the solid phase (activated surface sites). The results indicated that disinfection process significantly depended on the microbial-activated sites interactions on the modified surface. The chemical state of the activating agent had crucial impact to the inhibition rate. The characterization of the native and modified sorbents was performed by X-ray diffraction technique, X-ray photoelectron spectroscopy and scanning electron microscope. The concentration of adsorbed and released ions was determined by inductively coupled plasma optical emission spectroscopy and mass spectrometry. The antimicrobial efficiency of activated sorbents was related not only to the concentration of the activating agent, but moreover on the surface characteristics of the material, which affects the distribution and the accessibility of the activating agent.",
publisher = "Elsevier",
journal = "Applied Surface Science",
title = "The antimicrobial efficiency of silver activated sorbents",
volume = "357",
pages = "819-831",
doi = "10.1016/j.apsusc.2015.09.032"
}

Dolic, M. B., Rajakovic-Ognjanovic, V. N., Štrbac, S., Rakočević, Z. Lj., Veljović, Đ., Dimitrijević, S. I.,& Rajaković, L. V.. (2015). The antimicrobial efficiency of silver activated sorbents. in Applied Surface Science
Elsevier., 357, 819-831.
https://doi.org/10.1016/j.apsusc.2015.09.032

Dolic MB, Rajakovic-Ognjanovic VN, Štrbac S, Rakočević ZL, Veljović Đ, Dimitrijević SI, Rajaković LV. The antimicrobial efficiency of silver activated sorbents. in Applied Surface Science. 2015;357:819-831.
doi:10.1016/j.apsusc.2015.09.032 .

Dolic, Maja B, Rajakovic-Ognjanovic, Vladana N, Štrbac, Svetlana, Rakočević, Zlatko Lj., Veljović, Đorđe, Dimitrijević, Suzana I., Rajaković, Ljubinka V., "The antimicrobial efficiency of silver activated sorbents" in Applied Surface Science, 357 (2015):819-831,
https://doi.org/10.1016/j.apsusc.2015.09.032 . .

TY  - JOUR
AU  - Dolic, Maja B
AU  - Rajakovic-Ognjanovic, Vladana N
AU  - Štrbac, Svetlana
AU  - Rakočević, Zlatko Lj.
AU  - Veljović, Đorđe
AU  - Dimitrijević, Suzana I.
AU  - Rajaković, Ljubinka V.
PY  - 2015
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/3183
AB  - This study is focused on the surface modifications of the materials that are used for antimicrobial water treatment. Sorbents of different origin were activated by Ag+-ions. The selection of the most appropriate materials and the most effective activation agents was done according to the results of the sorption and desorption kinetic studies. Sorption capacities of selected sorbents: granulated activated carbon (GAC), zeolite (Z), and titanium dioxide (T), activated by Ag+-ions were following: 42.06, 13.51 and 17.53 mg/g, respectively. The antimicrobial activity of Ag/Z, Ag/GAC and Ag/T sorbents were tested against Gram-negative bacteria E. coli, Gram-positive bacteria S. aureus and yeast C. albicans. After 15 min of exposure period, the highest cell removal was obtained using Ag/Z against S. aureus and E. coli, 98.8 and 93.5%, respectively. Yeast cell inactivation was unsatisfactory for all three activated sorbents. The antimicrobial pathway of the activated sorbents has been examined by two separate tests - Ag+-ions desorbed from the activated surface to the aqueous phase and microbial cell removal caused by the Ag+-ions from the solid phase (activated surface sites). The results indicated that disinfection process significantly depended on the microbial-activated sites interactions on the modified surface. The chemical state of the activating agent had crucial impact to the inhibition rate. The characterization of the native and modified sorbents was performed by X-ray diffraction technique, X-ray photoelectron spectroscopy and scanning electron microscope. The concentration of adsorbed and released ions was determined by inductively coupled plasma optical emission spectroscopy and mass spectrometry. The antimicrobial efficiency of activated sorbents was related not only to the concentration of the activating agent, but moreover on the surface characteristics of the material, which affects the distribution and the accessibility of the activating agent.
PB  - Elsevier
T2  - Applied Surface Science
T1  - The antimicrobial efficiency of silver activated sorbents
VL  - 357
SP  - 819
EP  - 831
DO  - 10.1016/j.apsusc.2015.09.032
ER  - 

@article{
author = "Dolic, Maja B and Rajakovic-Ognjanovic, Vladana N and Štrbac, Svetlana and Rakočević, Zlatko Lj. and Veljović, Đorđe and Dimitrijević, Suzana I. and Rajaković, Ljubinka V.",
year = "2015",
abstract = "This study is focused on the surface modifications of the materials that are used for antimicrobial water treatment. Sorbents of different origin were activated by Ag+-ions. The selection of the most appropriate materials and the most effective activation agents was done according to the results of the sorption and desorption kinetic studies. Sorption capacities of selected sorbents: granulated activated carbon (GAC), zeolite (Z), and titanium dioxide (T), activated by Ag+-ions were following: 42.06, 13.51 and 17.53 mg/g, respectively. The antimicrobial activity of Ag/Z, Ag/GAC and Ag/T sorbents were tested against Gram-negative bacteria E. coli, Gram-positive bacteria S. aureus and yeast C. albicans. After 15 min of exposure period, the highest cell removal was obtained using Ag/Z against S. aureus and E. coli, 98.8 and 93.5%, respectively. Yeast cell inactivation was unsatisfactory for all three activated sorbents. The antimicrobial pathway of the activated sorbents has been examined by two separate tests - Ag+-ions desorbed from the activated surface to the aqueous phase and microbial cell removal caused by the Ag+-ions from the solid phase (activated surface sites). The results indicated that disinfection process significantly depended on the microbial-activated sites interactions on the modified surface. The chemical state of the activating agent had crucial impact to the inhibition rate. The characterization of the native and modified sorbents was performed by X-ray diffraction technique, X-ray photoelectron spectroscopy and scanning electron microscope. The concentration of adsorbed and released ions was determined by inductively coupled plasma optical emission spectroscopy and mass spectrometry. The antimicrobial efficiency of activated sorbents was related not only to the concentration of the activating agent, but moreover on the surface characteristics of the material, which affects the distribution and the accessibility of the activating agent.",
publisher = "Elsevier",
journal = "Applied Surface Science",
title = "The antimicrobial efficiency of silver activated sorbents",
volume = "357",
pages = "819-831",
doi = "10.1016/j.apsusc.2015.09.032"
}

Dolic, M. B., Rajakovic-Ognjanovic, V. N., Štrbac, S., Rakočević, Z. Lj., Veljović, Đ., Dimitrijević, S. I.,& Rajaković, L. V.. (2015). The antimicrobial efficiency of silver activated sorbents. in Applied Surface Science
Elsevier., 357, 819-831.
https://doi.org/10.1016/j.apsusc.2015.09.032

Dolic MB, Rajakovic-Ognjanovic VN, Štrbac S, Rakočević ZL, Veljović Đ, Dimitrijević SI, Rajaković LV. The antimicrobial efficiency of silver activated sorbents. in Applied Surface Science. 2015;357:819-831.
doi:10.1016/j.apsusc.2015.09.032 .

Dolic, Maja B, Rajakovic-Ognjanovic, Vladana N, Štrbac, Svetlana, Rakočević, Zlatko Lj., Veljović, Đorđe, Dimitrijević, Suzana I., Rajaković, Ljubinka V., "The antimicrobial efficiency of silver activated sorbents" in Applied Surface Science, 357 (2015):819-831,
https://doi.org/10.1016/j.apsusc.2015.09.032 . .