Marjanovic, B

Link to this page

Authority KeyName Variants
7ffc0ffb-7c06-477e-971d-1fae2c38aa1e
  • Marjanovic, B (1)
  • Marjanovic, B. (1)
Projects

Author's Bibliography

Characterization of the Ga-InSb system: experimental investigation of thermal, structural, mechanical and electrical properties

Gomidlelovic, L; Živković, Dragana; Talijan, Nadežda M.; Ćosović, Vladan; Balanović, Ljubiša; Pozega, E; Mitovski, A; Marjanovic, B

(National Institute of Optoelectronics, 2015)

TY  - JOUR
AU  - Gomidlelovic, L
AU  - Živković, Dragana
AU  - Talijan, Nadežda M.
AU  - Ćosović, Vladan
AU  - Balanović, Ljubiša
AU  - Pozega, E
AU  - Mitovski, A
AU  - Marjanovic, B
PY  - 2015
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/1709
AB  - The materials based on gallium-antimonide are widely used in electronic industry in the production of various electronic devices. The results of characterization of selected alloys in the Ga-InSb system obtained by experimental investigation of some thermal, structural, mechanical and electrical properties are presented in this paper. Applied experimental techniques included: differential thermal analysis, light optical microscopy, scanning electron microscopy with EDX, hardness, micro hardness and electrical conductivity measurements.
PB  - National Institute of Optoelectronics
T2  - Optoelectronics and Advanced Materials, Rapid Communications
T1  - Characterization of the Ga-InSb system: experimental investigation of thermal, structural, mechanical and electrical properties
VL  - 9
IS  - 7-8
SP  - 965
EP  - 968
UR  - https://hdl.handle.net/21.15107/rcub_cer_1709
ER  - 
@article{
author = "Gomidlelovic, L and Živković, Dragana and Talijan, Nadežda M. and Ćosović, Vladan and Balanović, Ljubiša and Pozega, E and Mitovski, A and Marjanovic, B",
year = "2015",
abstract = "The materials based on gallium-antimonide are widely used in electronic industry in the production of various electronic devices. The results of characterization of selected alloys in the Ga-InSb system obtained by experimental investigation of some thermal, structural, mechanical and electrical properties are presented in this paper. Applied experimental techniques included: differential thermal analysis, light optical microscopy, scanning electron microscopy with EDX, hardness, micro hardness and electrical conductivity measurements.",
publisher = "National Institute of Optoelectronics",
journal = "Optoelectronics and Advanced Materials, Rapid Communications",
title = "Characterization of the Ga-InSb system: experimental investigation of thermal, structural, mechanical and electrical properties",
volume = "9",
number = "7-8",
pages = "965-968",
url = "https://hdl.handle.net/21.15107/rcub_cer_1709"
}
Gomidlelovic, L., Živković, D., Talijan, N. M., Ćosović, V., Balanović, L., Pozega, E., Mitovski, A.,& Marjanovic, B.. (2015). Characterization of the Ga-InSb system: experimental investigation of thermal, structural, mechanical and electrical properties. in Optoelectronics and Advanced Materials, Rapid Communications
National Institute of Optoelectronics., 9(7-8), 965-968.
https://hdl.handle.net/21.15107/rcub_cer_1709
Gomidlelovic L, Živković D, Talijan NM, Ćosović V, Balanović L, Pozega E, Mitovski A, Marjanovic B. Characterization of the Ga-InSb system: experimental investigation of thermal, structural, mechanical and electrical properties. in Optoelectronics and Advanced Materials, Rapid Communications. 2015;9(7-8):965-968.
https://hdl.handle.net/21.15107/rcub_cer_1709 .
Gomidlelovic, L, Živković, Dragana, Talijan, Nadežda M., Ćosović, Vladan, Balanović, Ljubiša, Pozega, E, Mitovski, A, Marjanovic, B, "Characterization of the Ga-InSb system: experimental investigation of thermal, structural, mechanical and electrical properties" in Optoelectronics and Advanced Materials, Rapid Communications, 9, no. 7-8 (2015):965-968,
https://hdl.handle.net/21.15107/rcub_cer_1709 .

Phase diagram investigation and characterisation of ternary Sn-In-Me (Me = Ag, Cu) lead-free solder systems

Milosavljevic, Aleksandra; Živković, Dragana; Manasijević, Dragan; Talijan, Nadežda M.; Ćosović, Vladan; Grujić, Aleksandar; Marjanovic, B.

(Inderscience Enterprises Ltd, Geneva, 2010)

TY  - JOUR
AU  - Milosavljevic, Aleksandra
AU  - Živković, Dragana
AU  - Manasijević, Dragan
AU  - Talijan, Nadežda M.
AU  - Ćosović, Vladan
AU  - Grujić, Aleksandar
AU  - Marjanovic, B.
PY  - 2010
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/705
AB  - The Sn-In-Me (Me = Ag, Cu) systems belong to the group of potential candidates for lead-free solder materials. Samples, representing two vertical sections: with In : Ag = 7: 3 from Sn-In-Ag ternary system and with Cu: In = 1:9 from Sn-In-Cu ternary system, were measured with Differential Scanning Calorimetry (DSC). The experimental transformation temperatures were compared with CALPHAD-type calculation results based on thermodynamic parameter values from COST531 database. The characterisation of investigated samples was done using Scanning Electron Microscopy with Energy Dispersive X-ray (SEM-EDX), Light Optical Microscopy (LOM), electroconductivity and microhardness measurements.
PB  - Inderscience Enterprises Ltd, Geneva
T2  - International Journal of Materials & Product Technology
T1  - Phase diagram investigation and characterisation of ternary Sn-In-Me (Me = Ag, Cu) lead-free solder systems
VL  - 39
IS  - 1-2
SP  - 95
EP  - 107
DO  - 10.1504/IJMPT.2010.034263
ER  - 
@article{
author = "Milosavljevic, Aleksandra and Živković, Dragana and Manasijević, Dragan and Talijan, Nadežda M. and Ćosović, Vladan and Grujić, Aleksandar and Marjanovic, B.",
year = "2010",
abstract = "The Sn-In-Me (Me = Ag, Cu) systems belong to the group of potential candidates for lead-free solder materials. Samples, representing two vertical sections: with In : Ag = 7: 3 from Sn-In-Ag ternary system and with Cu: In = 1:9 from Sn-In-Cu ternary system, were measured with Differential Scanning Calorimetry (DSC). The experimental transformation temperatures were compared with CALPHAD-type calculation results based on thermodynamic parameter values from COST531 database. The characterisation of investigated samples was done using Scanning Electron Microscopy with Energy Dispersive X-ray (SEM-EDX), Light Optical Microscopy (LOM), electroconductivity and microhardness measurements.",
publisher = "Inderscience Enterprises Ltd, Geneva",
journal = "International Journal of Materials & Product Technology",
title = "Phase diagram investigation and characterisation of ternary Sn-In-Me (Me = Ag, Cu) lead-free solder systems",
volume = "39",
number = "1-2",
pages = "95-107",
doi = "10.1504/IJMPT.2010.034263"
}
Milosavljevic, A., Živković, D., Manasijević, D., Talijan, N. M., Ćosović, V., Grujić, A.,& Marjanovic, B.. (2010). Phase diagram investigation and characterisation of ternary Sn-In-Me (Me = Ag, Cu) lead-free solder systems. in International Journal of Materials & Product Technology
Inderscience Enterprises Ltd, Geneva., 39(1-2), 95-107.
https://doi.org/10.1504/IJMPT.2010.034263
Milosavljevic A, Živković D, Manasijević D, Talijan NM, Ćosović V, Grujić A, Marjanovic B. Phase diagram investigation and characterisation of ternary Sn-In-Me (Me = Ag, Cu) lead-free solder systems. in International Journal of Materials & Product Technology. 2010;39(1-2):95-107.
doi:10.1504/IJMPT.2010.034263 .
Milosavljevic, Aleksandra, Živković, Dragana, Manasijević, Dragan, Talijan, Nadežda M., Ćosović, Vladan, Grujić, Aleksandar, Marjanovic, B., "Phase diagram investigation and characterisation of ternary Sn-In-Me (Me = Ag, Cu) lead-free solder systems" in International Journal of Materials & Product Technology, 39, no. 1-2 (2010):95-107,
https://doi.org/10.1504/IJMPT.2010.034263 . .
2
2
3