Far infrared properties of bulk sintered and thin film Zn2SnO4
Samo za registrovane korisnike
2007
Autori
Nikolić, Maria VesnaIvetić, Tamara
Young, D.L.
Paraskevopoulos, Konstantinos M.
Zorba, Triantafyllia T.
Blagojević, Vladimir
Nikolić, Pantelija M.
Vasiljević-Radović, Dana
Ristić, Momčilo M.
Članak u časopisu (Objavljena verzija)
,
Elsevier
Metapodaci
Prikaz svih podataka o dokumentuApstrakt
Room temperature far infrared reflectivity spectra of single phase spinel zinc-stannate thin films, prepared by rf magnetron sputtering on a glass substrate, and bulk sintered samples were measured. The sintered samples were obtained by mechanical activation of starting ZnO and SnO2 powders for 10 min followed by sintering at 1300 °C for 2 h. The reflectivity diagrams obtained for bulk samples were numerically analyzed using the four-parameter model of coupled oscillators. The optical parameters were determined for six observed ionic oscillators belonging to the spinel structure and two additional oscillators originating from the sintering procedure resulting from pores and grain boundaries. The reflectivity diagrams obtained for thin film samples were analyzed using the four-parameter model for optical phonons with a standard optical multi-layer technique.
Ključne reči:
zinc-stannate / thin films / optical properties / infrared spectroscopyIzvor:
Materials Science and Engineering B-Solid State Materials for Advanced Technology, 2007, 138, 1, 7-11Izdavač:
- Elsevier
Finansiranje / projekti:
- Proučavanje međuzavisnosti u trijadi ''sinteza-struktura-svojstva'' za funkcionalne materijala (RS-MESTD-MPN2006-2010-142011)
DOI: 10.1016/j.mseb.2006.12.005
ISSN: 0921-5107
WoS: 000245322300002
Scopus: 2-s2.0-33847301632
Institucija/grupa
IHTMTY - JOUR AU - Nikolić, Maria Vesna AU - Ivetić, Tamara AU - Young, D.L. AU - Paraskevopoulos, Konstantinos M. AU - Zorba, Triantafyllia T. AU - Blagojević, Vladimir AU - Nikolić, Pantelija M. AU - Vasiljević-Radović, Dana AU - Ristić, Momčilo M. PY - 2007 UR - https://cer.ihtm.bg.ac.rs/handle/123456789/7482 AB - Room temperature far infrared reflectivity spectra of single phase spinel zinc-stannate thin films, prepared by rf magnetron sputtering on a glass substrate, and bulk sintered samples were measured. The sintered samples were obtained by mechanical activation of starting ZnO and SnO2 powders for 10 min followed by sintering at 1300 °C for 2 h. The reflectivity diagrams obtained for bulk samples were numerically analyzed using the four-parameter model of coupled oscillators. The optical parameters were determined for six observed ionic oscillators belonging to the spinel structure and two additional oscillators originating from the sintering procedure resulting from pores and grain boundaries. The reflectivity diagrams obtained for thin film samples were analyzed using the four-parameter model for optical phonons with a standard optical multi-layer technique. PB - Elsevier T2 - Materials Science and Engineering B-Solid State Materials for Advanced Technology T1 - Far infrared properties of bulk sintered and thin film Zn2SnO4 VL - 138 IS - 1 SP - 7 EP - 11 DO - 10.1016/j.mseb.2006.12.005 ER -
@article{ author = "Nikolić, Maria Vesna and Ivetić, Tamara and Young, D.L. and Paraskevopoulos, Konstantinos M. and Zorba, Triantafyllia T. and Blagojević, Vladimir and Nikolić, Pantelija M. and Vasiljević-Radović, Dana and Ristić, Momčilo M.", year = "2007", abstract = "Room temperature far infrared reflectivity spectra of single phase spinel zinc-stannate thin films, prepared by rf magnetron sputtering on a glass substrate, and bulk sintered samples were measured. The sintered samples were obtained by mechanical activation of starting ZnO and SnO2 powders for 10 min followed by sintering at 1300 °C for 2 h. The reflectivity diagrams obtained for bulk samples were numerically analyzed using the four-parameter model of coupled oscillators. The optical parameters were determined for six observed ionic oscillators belonging to the spinel structure and two additional oscillators originating from the sintering procedure resulting from pores and grain boundaries. The reflectivity diagrams obtained for thin film samples were analyzed using the four-parameter model for optical phonons with a standard optical multi-layer technique.", publisher = "Elsevier", journal = "Materials Science and Engineering B-Solid State Materials for Advanced Technology", title = "Far infrared properties of bulk sintered and thin film Zn2SnO4", volume = "138", number = "1", pages = "7-11", doi = "10.1016/j.mseb.2006.12.005" }
Nikolić, M. V., Ivetić, T., Young, D.L., Paraskevopoulos, K. M., Zorba, T. T., Blagojević, V., Nikolić, P. M., Vasiljević-Radović, D.,& Ristić, M. M.. (2007). Far infrared properties of bulk sintered and thin film Zn2SnO4. in Materials Science and Engineering B-Solid State Materials for Advanced Technology Elsevier., 138(1), 7-11. https://doi.org/10.1016/j.mseb.2006.12.005
Nikolić MV, Ivetić T, Young D, Paraskevopoulos KM, Zorba TT, Blagojević V, Nikolić PM, Vasiljević-Radović D, Ristić MM. Far infrared properties of bulk sintered and thin film Zn2SnO4. in Materials Science and Engineering B-Solid State Materials for Advanced Technology. 2007;138(1):7-11. doi:10.1016/j.mseb.2006.12.005 .
Nikolić, Maria Vesna, Ivetić, Tamara, Young, D.L., Paraskevopoulos, Konstantinos M., Zorba, Triantafyllia T., Blagojević, Vladimir, Nikolić, Pantelija M., Vasiljević-Radović, Dana, Ristić, Momčilo M., "Far infrared properties of bulk sintered and thin film Zn2SnO4" in Materials Science and Engineering B-Solid State Materials for Advanced Technology, 138, no. 1 (2007):7-11, https://doi.org/10.1016/j.mseb.2006.12.005 . .