Cyclohexane oxidation and cyclohexyl hydroperoxide decomposition by poly(4-vinylpyridine-co-divinylbenzene) supported cobalt and chromium complexes
Samo za registrovane korisnike
2010
Autori
Lončarević, DavorKrstić, Jugoslav
Dostanić, Jasmina
Manojlović, Dragan
Čupić, Željko
Jovanović, Dušan M.
Članak u časopisu (Objavljena verzija)
Metapodaci
Prikaz svih podataka o dokumentuApstrakt
Polymer supported catalysts with Co(II) and Cr(VI) ions were prepared and characterized by means of FTIR, diffuse reflectance UV-vis, nitrogen physisorption, mercury porosimetry and SEM-EDX measurements. The catalytic activity and selectivity of the polymer supported catalysts were tested in aerobic liquid-phase partial oxidation of cyclohexane in a polytetrafluoroethylene lined reactor. The influence of reaction time and temperature, main products addition, mass of the catalyst and different metals loading was investigated. Product yield and cyclohexyl hydroperoxide formation in the catalytic system were used as critical parameters which could be optimized by changing the cobalt content on the polymer and the catalyst mass used in the catalytic runs. By increasing cobalt content, a higher activity and corresponding lower selectivity towards cyclohexanone were obtained. This study indicates that the selectivity towards cyclohexanone and cyclohexanol is mainly defined by the yield and t...ype of the catalyst with minor influence of temperature and main products addition. In addition catalysts were used for deperoxidation of cyclohexyl hydroperoxide in mild conditions. Nearly the same selectivity towards cyclohexanone and cyclohexanol is achieved using the cobalt containing catalyst, while a higher selectivity towards cyclohexanone is achieved using the chromium containing catalysts.
Ključne reči:
Cyclohexane oxidation / Cyclohexyl hydroperoxide / Polymer / AerobicIzvor:
Chemical Engineering Journal, 2010, 157, 1, 181-188Izdavač:
- Elsevier Science Sa, Lausanne
Finansiranje / projekti:
- Sinteza, karakterizacija i testiranje katalitičkih svojstava specijalno dizajniranih materijala (RS-MESTD-MPN2006-2010-142019)
- Mezoporozni i nanomaterijali u katalitičkim i sorpcionim procesima (RS-MESTD-MPN2006-2010-166001)
DOI: 10.1016/j.cej.2009.11.034
ISSN: 1385-8947
WoS: 000274772100023
Scopus: 2-s2.0-75349093739
Institucija/grupa
IHTMTY - JOUR AU - Lončarević, Davor AU - Krstić, Jugoslav AU - Dostanić, Jasmina AU - Manojlović, Dragan AU - Čupić, Željko AU - Jovanović, Dušan M. PY - 2010 UR - https://cer.ihtm.bg.ac.rs/handle/123456789/744 AB - Polymer supported catalysts with Co(II) and Cr(VI) ions were prepared and characterized by means of FTIR, diffuse reflectance UV-vis, nitrogen physisorption, mercury porosimetry and SEM-EDX measurements. The catalytic activity and selectivity of the polymer supported catalysts were tested in aerobic liquid-phase partial oxidation of cyclohexane in a polytetrafluoroethylene lined reactor. The influence of reaction time and temperature, main products addition, mass of the catalyst and different metals loading was investigated. Product yield and cyclohexyl hydroperoxide formation in the catalytic system were used as critical parameters which could be optimized by changing the cobalt content on the polymer and the catalyst mass used in the catalytic runs. By increasing cobalt content, a higher activity and corresponding lower selectivity towards cyclohexanone were obtained. This study indicates that the selectivity towards cyclohexanone and cyclohexanol is mainly defined by the yield and type of the catalyst with minor influence of temperature and main products addition. In addition catalysts were used for deperoxidation of cyclohexyl hydroperoxide in mild conditions. Nearly the same selectivity towards cyclohexanone and cyclohexanol is achieved using the cobalt containing catalyst, while a higher selectivity towards cyclohexanone is achieved using the chromium containing catalysts. PB - Elsevier Science Sa, Lausanne T2 - Chemical Engineering Journal T1 - Cyclohexane oxidation and cyclohexyl hydroperoxide decomposition by poly(4-vinylpyridine-co-divinylbenzene) supported cobalt and chromium complexes VL - 157 IS - 1 SP - 181 EP - 188 DO - 10.1016/j.cej.2009.11.034 ER -
@article{ author = "Lončarević, Davor and Krstić, Jugoslav and Dostanić, Jasmina and Manojlović, Dragan and Čupić, Željko and Jovanović, Dušan M.", year = "2010", abstract = "Polymer supported catalysts with Co(II) and Cr(VI) ions were prepared and characterized by means of FTIR, diffuse reflectance UV-vis, nitrogen physisorption, mercury porosimetry and SEM-EDX measurements. The catalytic activity and selectivity of the polymer supported catalysts were tested in aerobic liquid-phase partial oxidation of cyclohexane in a polytetrafluoroethylene lined reactor. The influence of reaction time and temperature, main products addition, mass of the catalyst and different metals loading was investigated. Product yield and cyclohexyl hydroperoxide formation in the catalytic system were used as critical parameters which could be optimized by changing the cobalt content on the polymer and the catalyst mass used in the catalytic runs. By increasing cobalt content, a higher activity and corresponding lower selectivity towards cyclohexanone were obtained. This study indicates that the selectivity towards cyclohexanone and cyclohexanol is mainly defined by the yield and type of the catalyst with minor influence of temperature and main products addition. In addition catalysts were used for deperoxidation of cyclohexyl hydroperoxide in mild conditions. Nearly the same selectivity towards cyclohexanone and cyclohexanol is achieved using the cobalt containing catalyst, while a higher selectivity towards cyclohexanone is achieved using the chromium containing catalysts.", publisher = "Elsevier Science Sa, Lausanne", journal = "Chemical Engineering Journal", title = "Cyclohexane oxidation and cyclohexyl hydroperoxide decomposition by poly(4-vinylpyridine-co-divinylbenzene) supported cobalt and chromium complexes", volume = "157", number = "1", pages = "181-188", doi = "10.1016/j.cej.2009.11.034" }
Lončarević, D., Krstić, J., Dostanić, J., Manojlović, D., Čupić, Ž.,& Jovanović, D. M.. (2010). Cyclohexane oxidation and cyclohexyl hydroperoxide decomposition by poly(4-vinylpyridine-co-divinylbenzene) supported cobalt and chromium complexes. in Chemical Engineering Journal Elsevier Science Sa, Lausanne., 157(1), 181-188. https://doi.org/10.1016/j.cej.2009.11.034
Lončarević D, Krstić J, Dostanić J, Manojlović D, Čupić Ž, Jovanović DM. Cyclohexane oxidation and cyclohexyl hydroperoxide decomposition by poly(4-vinylpyridine-co-divinylbenzene) supported cobalt and chromium complexes. in Chemical Engineering Journal. 2010;157(1):181-188. doi:10.1016/j.cej.2009.11.034 .
Lončarević, Davor, Krstić, Jugoslav, Dostanić, Jasmina, Manojlović, Dragan, Čupić, Željko, Jovanović, Dušan M., "Cyclohexane oxidation and cyclohexyl hydroperoxide decomposition by poly(4-vinylpyridine-co-divinylbenzene) supported cobalt and chromium complexes" in Chemical Engineering Journal, 157, no. 1 (2010):181-188, https://doi.org/10.1016/j.cej.2009.11.034 . .