Mass transfer in inverse fluidized beds
Пренос масе у инверзно флуидизованом слоју
Authors
Jaćimovski, DarkoŠućurović, Katarina
Đuriš, Mihal
Arsenijević, Zorana
Krstić, Sanja
Bošković-Vragolović, Nevenka
Article (Accepted Version)
Metadata
Show full item recordAbstract
In this work, the coefficient of fluid-wall mass transfer in an inverse fluidized bed was determined using the adsorption method. The experiments were carried out in a column with a diameter of 45 mm with spherical and non-spherical particles of polypropylene and polyethylene with a diameter of 3.3-4.9 mm and a density of about 930 kg m-3. A diluted solution of methylene blue was used as a fluidization medium, which was adsorbed on part of the surface of the column on silica gel. The obtained results showed that the presence of particles during inverse fluidization does not contribute significantly to mass transfer compared to the influence of particles on transfer in conventional fluidized beds. Therefore, the pseudofluid concept was introduced into the analysis and an empirical correlation was performed to determine the mass transfer coefficient. The obtained results were compared with literature correlations for inverse and conventional fluidized beds.
У овом раду је одређиван коефицијент преноса масе флуид-зид у инверзнофлуидизованом слоју применом адсорпционе методе. Експерименти су вршени у колони пречника 45 мм са сферичним и несферичним честицама полипропилена и полиетилена пречника 3.3-4.9 мм и густине око 930 кг м-3. Као флуидизациони медијум коришћен је разблажени раствор метиленски плавог који је адсорбован на делу површине колоне на силикагелу. Добијени резултати показали су да присуство честица при инверзној флуидизацији не доприноси значајно преносу масе у поређењу са утицајем честица на пренос масе у конвенционално флуидизованим слојевима. Због тога је у анализу уведен концепт псеудофлуида и изведена је емпиријска корелација за одређивање коефицијента преноса масе. Извршено је поређење добијених резултата са литературним корелацијама за инверзну и конвенционалну флуидизације.
Keywords:
inverse fluidization / fluid-wall mass transfer / pseudofluidSource:
Journal of the Serbian Chemical Society, 2023, 88, 9, 905-919Publisher:
- Serbian Chemical Society
Funding / projects:
- Ministry of Science, Technological Development and Innovation of the Republic of Serbia, institutional funding - 200026 (University of Belgrade, Institute of Chemistry, Technology and Metallurgy - IChTM) (RS-MESTD-inst-2020-200026)
- Ministry of Science, Technological Development and Innovation of the Republic of Serbia, institutional funding - 200135 (University of Belgrade, Faculty of Technology and Metallurgy) (RS-MESTD-inst-2020-200135)
Note:
- Published version: https://cer.ihtm.bg.ac.rs/handle/123456789/7410
Related info:
Collections
Institution/Community
IHTMTY - JOUR AU - Jaćimovski, Darko AU - Šućurović, Katarina AU - Đuriš, Mihal AU - Arsenijević, Zorana AU - Krstić, Sanja AU - Bošković-Vragolović, Nevenka PY - 2023 UR - https://cer.ihtm.bg.ac.rs/handle/123456789/6303 AB - In this work, the coefficient of fluid-wall mass transfer in an inverse fluidized bed was determined using the adsorption method. The experiments were carried out in a column with a diameter of 45 mm with spherical and non-spherical particles of polypropylene and polyethylene with a diameter of 3.3-4.9 mm and a density of about 930 kg m-3. A diluted solution of methylene blue was used as a fluidization medium, which was adsorbed on part of the surface of the column on silica gel. The obtained results showed that the presence of particles during inverse fluidization does not contribute significantly to mass transfer compared to the influence of particles on transfer in conventional fluidized beds. Therefore, the pseudofluid concept was introduced into the analysis and an empirical correlation was performed to determine the mass transfer coefficient. The obtained results were compared with literature correlations for inverse and conventional fluidized beds. AB - У овом раду је одређиван коефицијент преноса масе флуид-зид у инверзнофлуидизованом слоју применом адсорпционе методе. Експерименти су вршени у колони пречника 45 мм са сферичним и несферичним честицама полипропилена и полиетилена пречника 3.3-4.9 мм и густине око 930 кг м-3. Као флуидизациони медијум коришћен је разблажени раствор метиленски плавог који је адсорбован на делу површине колоне на силикагелу. Добијени резултати показали су да присуство честица при инверзној флуидизацији не доприноси значајно преносу масе у поређењу са утицајем честица на пренос масе у конвенционално флуидизованим слојевима. Због тога је у анализу уведен концепт псеудофлуида и изведена је емпиријска корелација за одређивање коефицијента преноса масе. Извршено је поређење добијених резултата са литературним корелацијама за инверзну и конвенционалну флуидизације. PB - Serbian Chemical Society T2 - Journal of the Serbian Chemical Society T1 - Mass transfer in inverse fluidized beds T1 - Пренос масе у инверзно флуидизованом слоју VL - 88 IS - 9 SP - 905 EP - 919 DO - 10.2298/JSC230116016J ER -
@article{ author = "Jaćimovski, Darko and Šućurović, Katarina and Đuriš, Mihal and Arsenijević, Zorana and Krstić, Sanja and Bošković-Vragolović, Nevenka", year = "2023", abstract = "In this work, the coefficient of fluid-wall mass transfer in an inverse fluidized bed was determined using the adsorption method. The experiments were carried out in a column with a diameter of 45 mm with spherical and non-spherical particles of polypropylene and polyethylene with a diameter of 3.3-4.9 mm and a density of about 930 kg m-3. A diluted solution of methylene blue was used as a fluidization medium, which was adsorbed on part of the surface of the column on silica gel. The obtained results showed that the presence of particles during inverse fluidization does not contribute significantly to mass transfer compared to the influence of particles on transfer in conventional fluidized beds. Therefore, the pseudofluid concept was introduced into the analysis and an empirical correlation was performed to determine the mass transfer coefficient. The obtained results were compared with literature correlations for inverse and conventional fluidized beds., У овом раду је одређиван коефицијент преноса масе флуид-зид у инверзнофлуидизованом слоју применом адсорпционе методе. Експерименти су вршени у колони пречника 45 мм са сферичним и несферичним честицама полипропилена и полиетилена пречника 3.3-4.9 мм и густине око 930 кг м-3. Као флуидизациони медијум коришћен је разблажени раствор метиленски плавог који је адсорбован на делу површине колоне на силикагелу. Добијени резултати показали су да присуство честица при инверзној флуидизацији не доприноси значајно преносу масе у поређењу са утицајем честица на пренос масе у конвенционално флуидизованим слојевима. Због тога је у анализу уведен концепт псеудофлуида и изведена је емпиријска корелација за одређивање коефицијента преноса масе. Извршено је поређење добијених резултата са литературним корелацијама за инверзну и конвенционалну флуидизације.", publisher = "Serbian Chemical Society", journal = "Journal of the Serbian Chemical Society", title = "Mass transfer in inverse fluidized beds, Пренос масе у инверзно флуидизованом слоју", volume = "88", number = "9", pages = "905-919", doi = "10.2298/JSC230116016J" }
Jaćimovski, D., Šućurović, K., Đuriš, M., Arsenijević, Z., Krstić, S.,& Bošković-Vragolović, N.. (2023). Mass transfer in inverse fluidized beds. in Journal of the Serbian Chemical Society Serbian Chemical Society., 88(9), 905-919. https://doi.org/10.2298/JSC230116016J
Jaćimovski D, Šućurović K, Đuriš M, Arsenijević Z, Krstić S, Bošković-Vragolović N. Mass transfer in inverse fluidized beds. in Journal of the Serbian Chemical Society. 2023;88(9):905-919. doi:10.2298/JSC230116016J .
Jaćimovski, Darko, Šućurović, Katarina, Đuriš, Mihal, Arsenijević, Zorana, Krstić, Sanja, Bošković-Vragolović, Nevenka, "Mass transfer in inverse fluidized beds" in Journal of the Serbian Chemical Society, 88, no. 9 (2023):905-919, https://doi.org/10.2298/JSC230116016J . .