Microstructural and cavitation erosion behavior of the cualni shape memory alloy
Аутори
Volkov - Husović, TatjanaIvanić, Ivana
Kožuh, Stjepan
Stevanović, Sanja
Vlahović, Milica
Martinović, Sanja
Stopić, Srećko
Gojić, Mirko
Чланак у часопису (Објављена верзија)
Метаподаци
Приказ свих података о документуАпстракт
Microstructural and cavitation erosion testing was carried out on Cu-12.8Al-4.1Ni (wt. %) shape memory alloy (SMA) samples produced by continuous casting followed by heat treatment consisting of solution annealing at 885◦ C for 60 min and, later, water quenching. Cavitation resistance testing was applied using a standard ultrasonic vibratory cavitation set up with stationary specimen. Surface changes during the cavitation were monitored by metallographic analysis using an optical microscope (OM), atomic force microscope (AFM), and scanning electron microscope (SEM) as well as by weight measurements. The results revealed a martensite microstructure after both casting and quenching. Microhardness value was higher after water quenching than in the as-cast state. After 420 min of cavitation exposure, a negligible mass loss was noticed for both samples. Based on the obtained results, both samples showed excellent cavitation resistance. Mass loss and morphological analysis of the formed pits... indicated better cavitation resistance for the as-cast state (L).
Кључне речи:
Atomic force microscopy / Cavitation erosion / Electron microscopy / Optical microscopyИзвор:
Metals, 2021, 11, 7, 997-Издавач:
- MDPI
Финансирање / пројекти:
- Министарство науке, технолошког развоја и иновација Републике Србије, институционално финансирање - 200135 (Универзитет у Београду, Технолошко-металуршки факултет) (RS-MESTD-inst-2020-200135)
- Министарство науке, технолошког развоја и иновација Републике Србије, институционално финансирање - 200026 (Универзитет у Београду, Институт за хемију, технологију и металургију - ИХТМ) (RS-MESTD-inst-2020-200026)
- The Croatian Science Foundation (Project IP-2014-09-3405)
DOI: 10.3390/met11070997
ISSN: 2075-4701
WoS: 000676247800001
Scopus: 2-s2.0-85108239118
Институција/група
IHTMTY - JOUR AU - Volkov - Husović, Tatjana AU - Ivanić, Ivana AU - Kožuh, Stjepan AU - Stevanović, Sanja AU - Vlahović, Milica AU - Martinović, Sanja AU - Stopić, Srećko AU - Gojić, Mirko PY - 2021 UR - https://cer.ihtm.bg.ac.rs/handle/123456789/4745 AB - Microstructural and cavitation erosion testing was carried out on Cu-12.8Al-4.1Ni (wt. %) shape memory alloy (SMA) samples produced by continuous casting followed by heat treatment consisting of solution annealing at 885◦ C for 60 min and, later, water quenching. Cavitation resistance testing was applied using a standard ultrasonic vibratory cavitation set up with stationary specimen. Surface changes during the cavitation were monitored by metallographic analysis using an optical microscope (OM), atomic force microscope (AFM), and scanning electron microscope (SEM) as well as by weight measurements. The results revealed a martensite microstructure after both casting and quenching. Microhardness value was higher after water quenching than in the as-cast state. After 420 min of cavitation exposure, a negligible mass loss was noticed for both samples. Based on the obtained results, both samples showed excellent cavitation resistance. Mass loss and morphological analysis of the formed pits indicated better cavitation resistance for the as-cast state (L). PB - MDPI T2 - Metals T1 - Microstructural and cavitation erosion behavior of the cualni shape memory alloy VL - 11 IS - 7 SP - 997 DO - 10.3390/met11070997 ER -
@article{ author = "Volkov - Husović, Tatjana and Ivanić, Ivana and Kožuh, Stjepan and Stevanović, Sanja and Vlahović, Milica and Martinović, Sanja and Stopić, Srećko and Gojić, Mirko", year = "2021", abstract = "Microstructural and cavitation erosion testing was carried out on Cu-12.8Al-4.1Ni (wt. %) shape memory alloy (SMA) samples produced by continuous casting followed by heat treatment consisting of solution annealing at 885◦ C for 60 min and, later, water quenching. Cavitation resistance testing was applied using a standard ultrasonic vibratory cavitation set up with stationary specimen. Surface changes during the cavitation were monitored by metallographic analysis using an optical microscope (OM), atomic force microscope (AFM), and scanning electron microscope (SEM) as well as by weight measurements. The results revealed a martensite microstructure after both casting and quenching. Microhardness value was higher after water quenching than in the as-cast state. After 420 min of cavitation exposure, a negligible mass loss was noticed for both samples. Based on the obtained results, both samples showed excellent cavitation resistance. Mass loss and morphological analysis of the formed pits indicated better cavitation resistance for the as-cast state (L).", publisher = "MDPI", journal = "Metals", title = "Microstructural and cavitation erosion behavior of the cualni shape memory alloy", volume = "11", number = "7", pages = "997", doi = "10.3390/met11070997" }
Volkov - Husović, T., Ivanić, I., Kožuh, S., Stevanović, S., Vlahović, M., Martinović, S., Stopić, S.,& Gojić, M.. (2021). Microstructural and cavitation erosion behavior of the cualni shape memory alloy. in Metals MDPI., 11(7), 997. https://doi.org/10.3390/met11070997
Volkov - Husović T, Ivanić I, Kožuh S, Stevanović S, Vlahović M, Martinović S, Stopić S, Gojić M. Microstructural and cavitation erosion behavior of the cualni shape memory alloy. in Metals. 2021;11(7):997. doi:10.3390/met11070997 .
Volkov - Husović, Tatjana, Ivanić, Ivana, Kožuh, Stjepan, Stevanović, Sanja, Vlahović, Milica, Martinović, Sanja, Stopić, Srećko, Gojić, Mirko, "Microstructural and cavitation erosion behavior of the cualni shape memory alloy" in Metals, 11, no. 7 (2021):997, https://doi.org/10.3390/met11070997 . .