Morphology investigation of mechanically activated ZnO-SnO2 system
Само за регистроване кориснике
2008
Аутори
Ivetić, T.Vuković, Zorica
Nikolić, Maria Vesna
Pavlović, Vladimir B.
Nikolić, J.R.
Minić, D.
Ristić, M.M.
Чланак у часопису (Објављена верзија)
Метаподаци
Приказ свих података о документуАпстракт
Powder mixtures of zinc oxide and tin oxide in the molar ratio, ZnO:SnO2 = 2:1, were mechanically activated in a planetary ball mill in the time intervals of 0-160 min. The adsorption-desorption isotherms, specific surface area, pore volume and pore size distribution spectra of mechanically activated powder mixtures were established by N2 adsorption at 77 K. Microstructure analysis was performed using scanning electron microscopy (SEM) and digital pattern recognition (DPR) microstructure quantity analysis. The phase composition of the mixed powders was determined by X-ray analysis. Mechanochemical activation of the ZnO-SnO2 system resulted in fine grinding of the starting particles and generation of contacts between them, mass transfer at contacts zones and formation of Zn2SnO4 spinel, which was observed after 40 min of activation.
Кључне речи:
A. Milling / powders / spinels / Microstructure analysis / solid-state reactionИзвор:
Ceramics International, 2008, 34, 3, 639-643Издавач:
- Elsevier Sci Ltd, Oxford
Финансирање / пројекти:
- Проучавање међузависности у тријади ''синтеза-структура-својства'' за функционалне материјала (RS-MESTD-MPN2006-2010-142011)
DOI: 10.1016/j.ceramint.2007.01.003
ISSN: 0272-8842
WoS: 000254698300028
Scopus: 2-s2.0-39049093773
Институција/група
IHTMTY - JOUR AU - Ivetić, T. AU - Vuković, Zorica AU - Nikolić, Maria Vesna AU - Pavlović, Vladimir B. AU - Nikolić, J.R. AU - Minić, D. AU - Ristić, M.M. PY - 2008 UR - https://cer.ihtm.bg.ac.rs/handle/123456789/462 AB - Powder mixtures of zinc oxide and tin oxide in the molar ratio, ZnO:SnO2 = 2:1, were mechanically activated in a planetary ball mill in the time intervals of 0-160 min. The adsorption-desorption isotherms, specific surface area, pore volume and pore size distribution spectra of mechanically activated powder mixtures were established by N2 adsorption at 77 K. Microstructure analysis was performed using scanning electron microscopy (SEM) and digital pattern recognition (DPR) microstructure quantity analysis. The phase composition of the mixed powders was determined by X-ray analysis. Mechanochemical activation of the ZnO-SnO2 system resulted in fine grinding of the starting particles and generation of contacts between them, mass transfer at contacts zones and formation of Zn2SnO4 spinel, which was observed after 40 min of activation. PB - Elsevier Sci Ltd, Oxford T2 - Ceramics International T1 - Morphology investigation of mechanically activated ZnO-SnO2 system VL - 34 IS - 3 SP - 639 EP - 643 DO - 10.1016/j.ceramint.2007.01.003 ER -
@article{ author = "Ivetić, T. and Vuković, Zorica and Nikolić, Maria Vesna and Pavlović, Vladimir B. and Nikolić, J.R. and Minić, D. and Ristić, M.M.", year = "2008", abstract = "Powder mixtures of zinc oxide and tin oxide in the molar ratio, ZnO:SnO2 = 2:1, were mechanically activated in a planetary ball mill in the time intervals of 0-160 min. The adsorption-desorption isotherms, specific surface area, pore volume and pore size distribution spectra of mechanically activated powder mixtures were established by N2 adsorption at 77 K. Microstructure analysis was performed using scanning electron microscopy (SEM) and digital pattern recognition (DPR) microstructure quantity analysis. The phase composition of the mixed powders was determined by X-ray analysis. Mechanochemical activation of the ZnO-SnO2 system resulted in fine grinding of the starting particles and generation of contacts between them, mass transfer at contacts zones and formation of Zn2SnO4 spinel, which was observed after 40 min of activation.", publisher = "Elsevier Sci Ltd, Oxford", journal = "Ceramics International", title = "Morphology investigation of mechanically activated ZnO-SnO2 system", volume = "34", number = "3", pages = "639-643", doi = "10.1016/j.ceramint.2007.01.003" }
Ivetić, T., Vuković, Z., Nikolić, M. V., Pavlović, V. B., Nikolić, J.R., Minić, D.,& Ristić, M.M.. (2008). Morphology investigation of mechanically activated ZnO-SnO2 system. in Ceramics International Elsevier Sci Ltd, Oxford., 34(3), 639-643. https://doi.org/10.1016/j.ceramint.2007.01.003
Ivetić T, Vuković Z, Nikolić MV, Pavlović VB, Nikolić J, Minić D, Ristić M. Morphology investigation of mechanically activated ZnO-SnO2 system. in Ceramics International. 2008;34(3):639-643. doi:10.1016/j.ceramint.2007.01.003 .
Ivetić, T., Vuković, Zorica, Nikolić, Maria Vesna, Pavlović, Vladimir B., Nikolić, J.R., Minić, D., Ristić, M.M., "Morphology investigation of mechanically activated ZnO-SnO2 system" in Ceramics International, 34, no. 3 (2008):639-643, https://doi.org/10.1016/j.ceramint.2007.01.003 . .