Application of reactive siloxane prepolymers for the synthesis of thermoplastic poly(ester-siloxane)s and poly(ester-ether-siloxane)s
Primena reaktivnih siloksanskih pretpolimera za sintezu poli(ester-siloksana) i poli(ester-etar-siloksana)
Article (Published version)
Metadata
Show full item recordAbstract
Thermoplastic poly(ester-siloxane)s (TPES) and poly(ester-ether-siloxane)s, (TPEES), based on poly(butylene terephthalate) (PBT) as the hard segment and different siloxane-prepolymers as the soft segments, were prepared. The TPES and TPEES were synthesized by catalyzed two-step transesterification from dimethyl terephthalate, (DMT), 1,4-butanediol, (BD) and a siloxane-prepolymer. Incorporation of dicarboxypropyl- or disilanol-terminated poly(dimethylsiloxane) s (PDMS) into the polar poly(butylene terephthalate) chains resulted in rather inhomogeneous TPES copolymers, which was a consequence of a prononuced phase separation of the polar and non-polar reactants during synthesis. Two concepts were employed to avoid or reduce phase separation: 1) the use of siloxane-containing triblock prepolymers with hydrophilic terminal blocks, such as ethylene oxide (EO), poly(propylene oxide) (PPO) or poly(caprolactone) (PLC) when the terminal blocks serve as a compatibilizer between the extremely non...-polar PDMS and the polar DMT and BD, and 2) the use of a high-boiling solvent (1,2,4-trichlorobenzene) during the first phase of the reaction. Homogeneity was significantly improved in the case of copolymers based on PCL-PDMS-PCL.
U okviru ovog rada su sintetisani termoplastični poli(estar–siloksani) (TPES)
i poli(estar–etar–siloksani) (TPEES), sa tvrdim segmentima na bazi poli(butilentereftalata)
(PBT) i mekim segmentima na bazi različitih siloksanskih pretpolimera.
TPES i TPEES su sintetisani katalizovanom reakcijom dvostepene transesterifikacije,
iz dimetilterftalata (DMT), 1,4-butandiola (BD) i odgovarajućeg siloksanskog
pretpolimera. Pri ugradnji dikarboksipropil- ili disilanol-terminiranih
poli(dimetilsiloksana) (PDMS) u polarne poli(butilentereftalatne) lance dobijeni
su prilično nehomogeni TPES kopolimeri, što je bila posledica loše menjivosti
reaktanata tokom odigravanja reakcije. Primenjena su dva koncepta da bi se izbeglo
ili smanjilo fazno razdvajanje reakcione smene tokom sinteze organo–siloksanskih
kopolimera: 1) primena siloksanskih triblok-pretpolimera kod kojih su
hidrofilni terminalni blokovi, izgrađeni od etilenoksida (EO), poli(propilenoksida)
(PPO) ili poli(kaprolaktona) (PLC), i...mali funkciju kompatibilizatora između
nepolarnog PDMS-a i polarnih reaktanata, DMT-a i BD-a i 2) primena rastvaranja
visoke temperature ključanja (1,2,4-trihlorbenzena) za vreme izvođenja prve
faze reakcije. Značajno povećanje homogenosti postignuto je kod kopolimera na bazi
PCL–PDMS–PCL segmenata.
Keywords:
Compatibility / Phase separation / Poly(ester-ether-siloxane)s / Poly(ester-siloxane)s / Thermoplastic elastomersSource:
Journal of the Serbian Chemical Society, 2007, 72, 2, 139-150Publisher:
- Belgrade : Serbian Chemical Society
Funding / projects:
DOI: 10.2298/JSC0702139A
ISSN: 0352-5139; 1820-7421
WoS: 000245323500007
Scopus: 2-s2.0-34147183783
Collections
Institution/Community
IHTMTY - JOUR AU - Antić, Vesna AU - Vučković, Marija V. AU - Đonlagić, Jasna A. PY - 2007 UR - https://cer.ihtm.bg.ac.rs/handle/123456789/4625 AB - Thermoplastic poly(ester-siloxane)s (TPES) and poly(ester-ether-siloxane)s, (TPEES), based on poly(butylene terephthalate) (PBT) as the hard segment and different siloxane-prepolymers as the soft segments, were prepared. The TPES and TPEES were synthesized by catalyzed two-step transesterification from dimethyl terephthalate, (DMT), 1,4-butanediol, (BD) and a siloxane-prepolymer. Incorporation of dicarboxypropyl- or disilanol-terminated poly(dimethylsiloxane) s (PDMS) into the polar poly(butylene terephthalate) chains resulted in rather inhomogeneous TPES copolymers, which was a consequence of a prononuced phase separation of the polar and non-polar reactants during synthesis. Two concepts were employed to avoid or reduce phase separation: 1) the use of siloxane-containing triblock prepolymers with hydrophilic terminal blocks, such as ethylene oxide (EO), poly(propylene oxide) (PPO) or poly(caprolactone) (PLC) when the terminal blocks serve as a compatibilizer between the extremely non-polar PDMS and the polar DMT and BD, and 2) the use of a high-boiling solvent (1,2,4-trichlorobenzene) during the first phase of the reaction. Homogeneity was significantly improved in the case of copolymers based on PCL-PDMS-PCL. AB - U okviru ovog rada su sintetisani termoplastični poli(estar–siloksani) (TPES) i poli(estar–etar–siloksani) (TPEES), sa tvrdim segmentima na bazi poli(butilentereftalata) (PBT) i mekim segmentima na bazi različitih siloksanskih pretpolimera. TPES i TPEES su sintetisani katalizovanom reakcijom dvostepene transesterifikacije, iz dimetilterftalata (DMT), 1,4-butandiola (BD) i odgovarajućeg siloksanskog pretpolimera. Pri ugradnji dikarboksipropil- ili disilanol-terminiranih poli(dimetilsiloksana) (PDMS) u polarne poli(butilentereftalatne) lance dobijeni su prilično nehomogeni TPES kopolimeri, što je bila posledica loše menjivosti reaktanata tokom odigravanja reakcije. Primenjena su dva koncepta da bi se izbeglo ili smanjilo fazno razdvajanje reakcione smene tokom sinteze organo–siloksanskih kopolimera: 1) primena siloksanskih triblok-pretpolimera kod kojih su hidrofilni terminalni blokovi, izgrađeni od etilenoksida (EO), poli(propilenoksida) (PPO) ili poli(kaprolaktona) (PLC), imali funkciju kompatibilizatora između nepolarnog PDMS-a i polarnih reaktanata, DMT-a i BD-a i 2) primena rastvaranja visoke temperature ključanja (1,2,4-trihlorbenzena) za vreme izvođenja prve faze reakcije. Značajno povećanje homogenosti postignuto je kod kopolimera na bazi PCL–PDMS–PCL segmenata. PB - Belgrade : Serbian Chemical Society T2 - Journal of the Serbian Chemical Society T1 - Application of reactive siloxane prepolymers for the synthesis of thermoplastic poly(ester-siloxane)s and poly(ester-ether-siloxane)s T1 - Primena reaktivnih siloksanskih pretpolimera za sintezu poli(ester-siloksana) i poli(ester-etar-siloksana) VL - 72 IS - 2 SP - 139 EP - 150 DO - 10.2298/JSC0702139A ER -
@article{ author = "Antić, Vesna and Vučković, Marija V. and Đonlagić, Jasna A.", year = "2007", abstract = "Thermoplastic poly(ester-siloxane)s (TPES) and poly(ester-ether-siloxane)s, (TPEES), based on poly(butylene terephthalate) (PBT) as the hard segment and different siloxane-prepolymers as the soft segments, were prepared. The TPES and TPEES were synthesized by catalyzed two-step transesterification from dimethyl terephthalate, (DMT), 1,4-butanediol, (BD) and a siloxane-prepolymer. Incorporation of dicarboxypropyl- or disilanol-terminated poly(dimethylsiloxane) s (PDMS) into the polar poly(butylene terephthalate) chains resulted in rather inhomogeneous TPES copolymers, which was a consequence of a prononuced phase separation of the polar and non-polar reactants during synthesis. Two concepts were employed to avoid or reduce phase separation: 1) the use of siloxane-containing triblock prepolymers with hydrophilic terminal blocks, such as ethylene oxide (EO), poly(propylene oxide) (PPO) or poly(caprolactone) (PLC) when the terminal blocks serve as a compatibilizer between the extremely non-polar PDMS and the polar DMT and BD, and 2) the use of a high-boiling solvent (1,2,4-trichlorobenzene) during the first phase of the reaction. Homogeneity was significantly improved in the case of copolymers based on PCL-PDMS-PCL., U okviru ovog rada su sintetisani termoplastični poli(estar–siloksani) (TPES) i poli(estar–etar–siloksani) (TPEES), sa tvrdim segmentima na bazi poli(butilentereftalata) (PBT) i mekim segmentima na bazi različitih siloksanskih pretpolimera. TPES i TPEES su sintetisani katalizovanom reakcijom dvostepene transesterifikacije, iz dimetilterftalata (DMT), 1,4-butandiola (BD) i odgovarajućeg siloksanskog pretpolimera. Pri ugradnji dikarboksipropil- ili disilanol-terminiranih poli(dimetilsiloksana) (PDMS) u polarne poli(butilentereftalatne) lance dobijeni su prilično nehomogeni TPES kopolimeri, što je bila posledica loše menjivosti reaktanata tokom odigravanja reakcije. Primenjena su dva koncepta da bi se izbeglo ili smanjilo fazno razdvajanje reakcione smene tokom sinteze organo–siloksanskih kopolimera: 1) primena siloksanskih triblok-pretpolimera kod kojih su hidrofilni terminalni blokovi, izgrađeni od etilenoksida (EO), poli(propilenoksida) (PPO) ili poli(kaprolaktona) (PLC), imali funkciju kompatibilizatora između nepolarnog PDMS-a i polarnih reaktanata, DMT-a i BD-a i 2) primena rastvaranja visoke temperature ključanja (1,2,4-trihlorbenzena) za vreme izvođenja prve faze reakcije. Značajno povećanje homogenosti postignuto je kod kopolimera na bazi PCL–PDMS–PCL segmenata.", publisher = "Belgrade : Serbian Chemical Society", journal = "Journal of the Serbian Chemical Society", title = "Application of reactive siloxane prepolymers for the synthesis of thermoplastic poly(ester-siloxane)s and poly(ester-ether-siloxane)s, Primena reaktivnih siloksanskih pretpolimera za sintezu poli(ester-siloksana) i poli(ester-etar-siloksana)", volume = "72", number = "2", pages = "139-150", doi = "10.2298/JSC0702139A" }
Antić, V., Vučković, M. V.,& Đonlagić, J. A.. (2007). Application of reactive siloxane prepolymers for the synthesis of thermoplastic poly(ester-siloxane)s and poly(ester-ether-siloxane)s. in Journal of the Serbian Chemical Society Belgrade : Serbian Chemical Society., 72(2), 139-150. https://doi.org/10.2298/JSC0702139A
Antić V, Vučković MV, Đonlagić JA. Application of reactive siloxane prepolymers for the synthesis of thermoplastic poly(ester-siloxane)s and poly(ester-ether-siloxane)s. in Journal of the Serbian Chemical Society. 2007;72(2):139-150. doi:10.2298/JSC0702139A .
Antić, Vesna, Vučković, Marija V., Đonlagić, Jasna A., "Application of reactive siloxane prepolymers for the synthesis of thermoplastic poly(ester-siloxane)s and poly(ester-ether-siloxane)s" in Journal of the Serbian Chemical Society, 72, no. 2 (2007):139-150, https://doi.org/10.2298/JSC0702139A . .
Related items
Showing items related by title, author, creator and subject.
-
Structure-Property Correlation Study of Novel Poly(urethane-ester-siloxane) Networks
Pergal, Marija; Džunuzović, Jasna; Poreba, Rafal; Steinhart, Milos G.; Pergal, Miodrag M.; Vodnik, Vesna; Spirkova, Milena (American Chemical Society (ACS), 2013) -
Thermal properties of poly(urethane-ester-siloxane)s based on hyperbranched polyester
Pergal, Marija; Džunuzović, Jasna; Kicanovic, M.; Vodnik, Vesna; Pergal, Miodrag M.; Jovanovic, S. (Maik Nauka/Interperiodica/Springer, New York, 2011) -
Synthesis of thermoplastic poly(ester-siloxane)s in the melt and in solution / Sinteza termoplastičnih poli(estar-siloksana) u rastopu i rastvoru
Dojčinović, Biljana; Antić, Vesna; Vučković, Marija V.; Đonlagić, Jasna (Serbian Chemical Society, 2005)