Monitoring of a ceramic surface temperature field induced by pulsed Nd: YAG laser
Аутори
Knežević, DraganRadojković, Bojana
Ristić, Slavica
Polić, Suzana R.
Janićijević, Milovan
Tomić, Ljubiša
Jegdić, Bore
Чланак у часопису (Објављена верзија)
Метаподаци
Приказ свих података о документуАпстракт
Temperature distribution induced by laser radiation is a very important
parameter for an efficient and safe application of lasers in different ceramic
processing techniques. This paper presents the results of an infrared
thermography (IRT) application for monitoring temperature distribution on
a ceramic surface during Nd: YAG laser irradiation with different fluences
and 8ns pulse duration. FLIR, E40 and SC7200 IR cameras were used with
the aim of recording the maximum temperature in the irradiated zones. It
was expected that IRT could give some information related to the heat
affected zone and possible damage to the base material; however, the results
have shown that IR cameras, even those with high performance such as
SC7200, cannot record the maximum temperature value at the moment of
laser operation, but only the average temperature of the bulk sample
material after laser pulses. The ... results of the numerical simulation have
confirmed the value of the thermographic measurements. The microstructure
and micromorphology of the ceramic surface before and after the laser
treatment were analysed by optical and scanning electron microscopy as
well as by examining the roughness of the irradiated and non- irradiated
surfaces, while the micromechanical changes were analysed by comparing
the micro-hardness of the irradiated and non-exposed surfaces.
Кључне речи:
Laser / Chemical properties / Surface properties / Scanning electron microscopy (SEM) / Numerical simulationИзвор:
Thermal Science, 2021, 25, 1B, 567-578Издавач:
- Vinča Institute of Nuclear Sciences, Belgrade
Финансирање / пројекти:
- Истраживање и оптимизација технолошких и функционалних перформанси вентилационог млина термоелектране Костолац Б (RS-34028)
- Ministry of Culture and Information of the Republic of Serbia project IP 391-00-16/2017-16/38
Институција/група
IHTMTY - JOUR AU - Knežević, Dragan AU - Radojković, Bojana AU - Ristić, Slavica AU - Polić, Suzana R. AU - Janićijević, Milovan AU - Tomić, Ljubiša AU - Jegdić, Bore PY - 2021 UR - https://cer.ihtm.bg.ac.rs/handle/123456789/3978 AB - Temperature distribution induced by laser radiation is a very important parameter for an efficient and safe application of lasers in different ceramic processing techniques. This paper presents the results of an infrared thermography (IRT) application for monitoring temperature distribution on a ceramic surface during Nd: YAG laser irradiation with different fluences and 8ns pulse duration. FLIR, E40 and SC7200 IR cameras were used with the aim of recording the maximum temperature in the irradiated zones. It was expected that IRT could give some information related to the heat affected zone and possible damage to the base material; however, the results have shown that IR cameras, even those with high performance such as SC7200, cannot record the maximum temperature value at the moment of laser operation, but only the average temperature of the bulk sample material after laser pulses. The results of the numerical simulation have confirmed the value of the thermographic measurements. The microstructure and micromorphology of the ceramic surface before and after the laser treatment were analysed by optical and scanning electron microscopy as well as by examining the roughness of the irradiated and non- irradiated surfaces, while the micromechanical changes were analysed by comparing the micro-hardness of the irradiated and non-exposed surfaces. PB - Vinča Institute of Nuclear Sciences, Belgrade T2 - Thermal Science T1 - Monitoring of a ceramic surface temperature field induced by pulsed Nd: YAG laser VL - 25 IS - 1B SP - 567 EP - 578 DO - 10.2298/TSCI190811425K ER -
@article{ author = "Knežević, Dragan and Radojković, Bojana and Ristić, Slavica and Polić, Suzana R. and Janićijević, Milovan and Tomić, Ljubiša and Jegdić, Bore", year = "2021", abstract = "Temperature distribution induced by laser radiation is a very important parameter for an efficient and safe application of lasers in different ceramic processing techniques. This paper presents the results of an infrared thermography (IRT) application for monitoring temperature distribution on a ceramic surface during Nd: YAG laser irradiation with different fluences and 8ns pulse duration. FLIR, E40 and SC7200 IR cameras were used with the aim of recording the maximum temperature in the irradiated zones. It was expected that IRT could give some information related to the heat affected zone and possible damage to the base material; however, the results have shown that IR cameras, even those with high performance such as SC7200, cannot record the maximum temperature value at the moment of laser operation, but only the average temperature of the bulk sample material after laser pulses. The results of the numerical simulation have confirmed the value of the thermographic measurements. The microstructure and micromorphology of the ceramic surface before and after the laser treatment were analysed by optical and scanning electron microscopy as well as by examining the roughness of the irradiated and non- irradiated surfaces, while the micromechanical changes were analysed by comparing the micro-hardness of the irradiated and non-exposed surfaces.", publisher = "Vinča Institute of Nuclear Sciences, Belgrade", journal = "Thermal Science", title = "Monitoring of a ceramic surface temperature field induced by pulsed Nd: YAG laser", volume = "25", number = "1B", pages = "567-578", doi = "10.2298/TSCI190811425K" }
Knežević, D., Radojković, B., Ristić, S., Polić, S. R., Janićijević, M., Tomić, L.,& Jegdić, B.. (2021). Monitoring of a ceramic surface temperature field induced by pulsed Nd: YAG laser. in Thermal Science Vinča Institute of Nuclear Sciences, Belgrade., 25(1B), 567-578. https://doi.org/10.2298/TSCI190811425K
Knežević D, Radojković B, Ristić S, Polić SR, Janićijević M, Tomić L, Jegdić B. Monitoring of a ceramic surface temperature field induced by pulsed Nd: YAG laser. in Thermal Science. 2021;25(1B):567-578. doi:10.2298/TSCI190811425K .
Knežević, Dragan, Radojković, Bojana, Ristić, Slavica, Polić, Suzana R., Janićijević, Milovan, Tomić, Ljubiša, Jegdić, Bore, "Monitoring of a ceramic surface temperature field induced by pulsed Nd: YAG laser" in Thermal Science, 25, no. 1B (2021):567-578, https://doi.org/10.2298/TSCI190811425K . .