Using QFD and AHP Tools in the Case of Industrial Transmitters Manufacturing
Кorišćenje QFD И AHP alata u slučaju proizvodnje industrijskih transmitera
Чланак у часопису (Објављена верзија)
,
Faculty of Mechanical Engineering, Belgrade
Метаподаци
Приказ свих података о документуАпстракт
The analysis of a new product realization from the view of customer
requirements and a relevant technical response of a company is presented
in this paper. Two types of tools are used: QFD and AHP. HOQ within
QFD is used for modeling technical requirements on the basis of defined
customer demands. AHP serves as an addition in the process of technical
requirements definition, it is used as a strategy for fast response to
customer requirements. A comparison between leading foreign and
domestic producers of transmitters has also been presented. HOQ
realization on the example of intelligent pressure transmitter has shown
that design parameters were defined. The implementation of AHP
methodology has pointed at the significance of modular architecture for
transmitter realization. Original contribution of this work is reflected in
QFD analysis solutions – customer requirements were satisfied by giving
technical characteristics with the aim of a new product realization.
У овом раду представљена је анализа реализације
новог производа са аспекта потреба купаца и
релевантног техничког одговора компаније. Користе
се две врсте алата: QFD и АHP. HOQ у оквиру QFD
се користи за моделирање техничких захтева на
основу дефинисаних потреба клијената. AHP служи
као додатак у процесу дефинисања техничких
захтева, употребљава се као стратегија за брзо
реаговање на захтеве купаца. Такође је приказано
поређење водећих страних и домаћих произвођача
трансмитера. Реализација HOQ-а на примеру
интелигентног трансмитера притиска показала је да
су параметри дизајна дефинисани. Примена AHP
методологије указала је на значај модуларне
архитектуре за реализацију трансмитера.
Оригинални допринос овог рада огледа се у QFD
анализама - захтеви купаца су удовољени давањем
техничких карактеристика са циљем реализације
новог производа.
Кључне речи:
QFD / AHP / Designing of products / Transmitter / Modular designИзвор:
FME Transactions, 2020, 48, 164-172Издавач:
- Serbia : University of Belgrade, Faculty of Mechanical Engineering
Финансирање / пројекти:
- Микро, нано-системи и сензори за примену у електропривреди, процесној индустрији и заштити животне средине (RS-MESTD-Technological Development (TD or TR)-32008)
- Развој стохастичког модела утврђивања елемената времена рада производног циклуса и њихова оптимизација за серијску производњу у металопрерађивачкој индустрији и у процесима рециклаже (RS-MESTD-Technological Development (TD or TR)-35017)
DOI: 10.5937/fmet2001164C
ISSN: 1451-2092; 2406-128X
WoS: 000500917100021
Scopus: 2-s2.0-85078673666
Институција/група
IHTMTY - JOUR AU - Ćoćkalo, Dragan AU - Vorkapić, Miloš AU - Kreculj, Dragan AU - Đorđević, Dejan AU - Frantlović, Miloš PY - 2020 UR - https://cer.ihtm.bg.ac.rs/handle/123456789/3862 AB - The analysis of a new product realization from the view of customer requirements and a relevant technical response of a company is presented in this paper. Two types of tools are used: QFD and AHP. HOQ within QFD is used for modeling technical requirements on the basis of defined customer demands. AHP serves as an addition in the process of technical requirements definition, it is used as a strategy for fast response to customer requirements. A comparison between leading foreign and domestic producers of transmitters has also been presented. HOQ realization on the example of intelligent pressure transmitter has shown that design parameters were defined. The implementation of AHP methodology has pointed at the significance of modular architecture for transmitter realization. Original contribution of this work is reflected in QFD analysis solutions – customer requirements were satisfied by giving technical characteristics with the aim of a new product realization. AB - У овом раду представљена је анализа реализације новог производа са аспекта потреба купаца и релевантног техничког одговора компаније. Користе се две врсте алата: QFD и АHP. HOQ у оквиру QFD се користи за моделирање техничких захтева на основу дефинисаних потреба клијената. AHP служи као додатак у процесу дефинисања техничких захтева, употребљава се као стратегија за брзо реаговање на захтеве купаца. Такође је приказано поређење водећих страних и домаћих произвођача трансмитера. Реализација HOQ-а на примеру интелигентног трансмитера притиска показала је да су параметри дизајна дефинисани. Примена AHP методологије указала је на значај модуларне архитектуре за реализацију трансмитера. Оригинални допринос овог рада огледа се у QFD анализама - захтеви купаца су удовољени давањем техничких карактеристика са циљем реализације новог производа. PB - Serbia : University of Belgrade, Faculty of Mechanical Engineering T2 - FME Transactions T1 - Using QFD and AHP Tools in the Case of Industrial Transmitters Manufacturing T1 - Кorišćenje QFD И AHP alata u slučaju proizvodnje industrijskih transmitera IS - 48 IS - 1 SP - 164 EP - 172 DO - 10.5937/fmet2001164C ER -
@article{ author = "Ćoćkalo, Dragan and Vorkapić, Miloš and Kreculj, Dragan and Đorđević, Dejan and Frantlović, Miloš", year = "2020", abstract = "The analysis of a new product realization from the view of customer requirements and a relevant technical response of a company is presented in this paper. Two types of tools are used: QFD and AHP. HOQ within QFD is used for modeling technical requirements on the basis of defined customer demands. AHP serves as an addition in the process of technical requirements definition, it is used as a strategy for fast response to customer requirements. A comparison between leading foreign and domestic producers of transmitters has also been presented. HOQ realization on the example of intelligent pressure transmitter has shown that design parameters were defined. The implementation of AHP methodology has pointed at the significance of modular architecture for transmitter realization. Original contribution of this work is reflected in QFD analysis solutions – customer requirements were satisfied by giving technical characteristics with the aim of a new product realization., У овом раду представљена је анализа реализације новог производа са аспекта потреба купаца и релевантног техничког одговора компаније. Користе се две врсте алата: QFD и АHP. HOQ у оквиру QFD се користи за моделирање техничких захтева на основу дефинисаних потреба клијената. AHP служи као додатак у процесу дефинисања техничких захтева, употребљава се као стратегија за брзо реаговање на захтеве купаца. Такође је приказано поређење водећих страних и домаћих произвођача трансмитера. Реализација HOQ-а на примеру интелигентног трансмитера притиска показала је да су параметри дизајна дефинисани. Примена AHP методологије указала је на значај модуларне архитектуре за реализацију трансмитера. Оригинални допринос овог рада огледа се у QFD анализама - захтеви купаца су удовољени давањем техничких карактеристика са циљем реализације новог производа.", publisher = "Serbia : University of Belgrade, Faculty of Mechanical Engineering", journal = "FME Transactions", title = "Using QFD and AHP Tools in the Case of Industrial Transmitters Manufacturing, Кorišćenje QFD И AHP alata u slučaju proizvodnje industrijskih transmitera", number = "48, 1", pages = "164-172", doi = "10.5937/fmet2001164C" }
Ćoćkalo, D., Vorkapić, M., Kreculj, D., Đorđević, D.,& Frantlović, M.. (2020). Using QFD and AHP Tools in the Case of Industrial Transmitters Manufacturing. in FME Transactions Serbia : University of Belgrade, Faculty of Mechanical Engineering.(48), 164-172. https://doi.org/10.5937/fmet2001164C
Ćoćkalo D, Vorkapić M, Kreculj D, Đorđević D, Frantlović M. Using QFD and AHP Tools in the Case of Industrial Transmitters Manufacturing. in FME Transactions. 2020;(48):164-172. doi:10.5937/fmet2001164C .
Ćoćkalo, Dragan, Vorkapić, Miloš, Kreculj, Dragan, Đorđević, Dejan, Frantlović, Miloš, "Using QFD and AHP Tools in the Case of Industrial Transmitters Manufacturing" in FME Transactions, no. 48 (2020):164-172, https://doi.org/10.5937/fmet2001164C . .