Microstructure and cavitation erosion performance of nickel-Inconel 718 composite coatings produced with cold spray
Само за регистроване кориснике
2020
Аутори
Kazasidis, MariosYin, Shuo
Cassidy, Jonathan
Volkov-Husović, Tatjana
Vlahović, Milica
Martinović, Sanja
Kyriakopoulou, Elena
Lupoi, Rocco
Чланак у часопису (Објављена верзија)
,
Elsevier
Метаподаци
Приказ свих података о документуАпстракт
The cold spray technique was employed in this study to produce pure nickel (Ni) and nickel-Inconel 718 powder deposits on duplex stainless steel substrates. High quality coatings were manufactured using nitrogen as the propellant gas. The coatings exhibited satisfactory Inconel 718 (In718) retention within the Ni matrix due to the highly ductile binder phase necessary for fabrication. The characterization of the coating microstructures was implemented by means of X-ray diffraction, electron microscopy, energy-dispersive X-ray spectroscopy, and microhardness testing. In addition, the erosion resistance of both coatings was evaluated by performing cavitation erosion tests, with the analysis of the eroded surfaces revealing different erosion mechanisms for each coating. The results demonstrated the efficiency of the cold spray technique for use in the production of metal-metal matrix composite coatings and the potential of In718 use in applications which demand enhanced cavitation erosion... resistance.
Кључне речи:
Cold spray / Nickel / Inconel 718 / Cavitation erosion / CoatingИзвор:
Surface and Coatings Technology, 2020, 382, 125195-Издавач:
- Elsevier
Финансирање / пројекти:
- SchuF Valve Technology GmbH : IP2018 0730
- Синтеза, процесирање и карактеризација наноструктурних материјала за примену у области енергије, механичког инжењерства, заштите животне стредине и биомедицине (RS-MESTD-Integrated and Interdisciplinary Research (IIR or III)-45012)
- Имплементација савременијих техничко-технолошких и еколошких решења у постојећим производним системима Рудника Бакра Бор и Рудника Бакра Мајданпек (RS-MESTD-Technological Development (TD or TR)-33007)
Напомена:
- The peer-reviewed version: http://cer.ihtm.bg.ac.rs/handle/123456789/3387
DOI: 10.1016/j.surfcoat.2019.125195
ISSN: 0257-8972
WoS: 000509631200007
Scopus: 2-s2.0-85076004015
Институција/група
IHTMTY - JOUR AU - Kazasidis, Marios AU - Yin, Shuo AU - Cassidy, Jonathan AU - Volkov-Husović, Tatjana AU - Vlahović, Milica AU - Martinović, Sanja AU - Kyriakopoulou, Elena AU - Lupoi, Rocco PY - 2020 UR - https://cer.ihtm.bg.ac.rs/handle/123456789/3274 AB - The cold spray technique was employed in this study to produce pure nickel (Ni) and nickel-Inconel 718 powder deposits on duplex stainless steel substrates. High quality coatings were manufactured using nitrogen as the propellant gas. The coatings exhibited satisfactory Inconel 718 (In718) retention within the Ni matrix due to the highly ductile binder phase necessary for fabrication. The characterization of the coating microstructures was implemented by means of X-ray diffraction, electron microscopy, energy-dispersive X-ray spectroscopy, and microhardness testing. In addition, the erosion resistance of both coatings was evaluated by performing cavitation erosion tests, with the analysis of the eroded surfaces revealing different erosion mechanisms for each coating. The results demonstrated the efficiency of the cold spray technique for use in the production of metal-metal matrix composite coatings and the potential of In718 use in applications which demand enhanced cavitation erosion resistance. PB - Elsevier T2 - Surface and Coatings Technology T1 - Microstructure and cavitation erosion performance of nickel-Inconel 718 composite coatings produced with cold spray VL - 382 SP - 125195 DO - 10.1016/j.surfcoat.2019.125195 ER -
@article{ author = "Kazasidis, Marios and Yin, Shuo and Cassidy, Jonathan and Volkov-Husović, Tatjana and Vlahović, Milica and Martinović, Sanja and Kyriakopoulou, Elena and Lupoi, Rocco", year = "2020", abstract = "The cold spray technique was employed in this study to produce pure nickel (Ni) and nickel-Inconel 718 powder deposits on duplex stainless steel substrates. High quality coatings were manufactured using nitrogen as the propellant gas. The coatings exhibited satisfactory Inconel 718 (In718) retention within the Ni matrix due to the highly ductile binder phase necessary for fabrication. The characterization of the coating microstructures was implemented by means of X-ray diffraction, electron microscopy, energy-dispersive X-ray spectroscopy, and microhardness testing. In addition, the erosion resistance of both coatings was evaluated by performing cavitation erosion tests, with the analysis of the eroded surfaces revealing different erosion mechanisms for each coating. The results demonstrated the efficiency of the cold spray technique for use in the production of metal-metal matrix composite coatings and the potential of In718 use in applications which demand enhanced cavitation erosion resistance.", publisher = "Elsevier", journal = "Surface and Coatings Technology", title = "Microstructure and cavitation erosion performance of nickel-Inconel 718 composite coatings produced with cold spray", volume = "382", pages = "125195", doi = "10.1016/j.surfcoat.2019.125195" }
Kazasidis, M., Yin, S., Cassidy, J., Volkov-Husović, T., Vlahović, M., Martinović, S., Kyriakopoulou, E.,& Lupoi, R.. (2020). Microstructure and cavitation erosion performance of nickel-Inconel 718 composite coatings produced with cold spray. in Surface and Coatings Technology Elsevier., 382, 125195. https://doi.org/10.1016/j.surfcoat.2019.125195
Kazasidis M, Yin S, Cassidy J, Volkov-Husović T, Vlahović M, Martinović S, Kyriakopoulou E, Lupoi R. Microstructure and cavitation erosion performance of nickel-Inconel 718 composite coatings produced with cold spray. in Surface and Coatings Technology. 2020;382:125195. doi:10.1016/j.surfcoat.2019.125195 .
Kazasidis, Marios, Yin, Shuo, Cassidy, Jonathan, Volkov-Husović, Tatjana, Vlahović, Milica, Martinović, Sanja, Kyriakopoulou, Elena, Lupoi, Rocco, "Microstructure and cavitation erosion performance of nickel-Inconel 718 composite coatings produced with cold spray" in Surface and Coatings Technology, 382 (2020):125195, https://doi.org/10.1016/j.surfcoat.2019.125195 . .