Tribological characterisation in dry sliding conditions of compocasted hybrid A356/SiCp/Grp composites with graphite macroparticles
Samo za registrovane korisnike
2019
Članak u časopisu (Objavljena verzija)
Metapodaci
Prikaz svih podataka o dokumentuApstrakt
The influence of SiC microparticles reinforcement and graphite macroparticles addition on the friction and wear characteristics of A356 Al-Si alloys, produced by compocasting, has been assessed using a pin-on-disc tribometer. The incorporation of SiC reinforcement increased the coefficient of friction and reduced the wear. The addition of graphite did not reduce the coefficient of friction. In the case of hybrid composite with 1 wt% graphite, wear was more or less the same as with SiC reinforced composite, while in the case of hybrid composite with 3 wt% graphite, wear was further reduced. On the worn surfaces of hybrid composites, the presence of the discontinuous mixed surface layer, containing graphite and transferred counter-body material, was noticed.
Ključne reči:
Friction / Graphite / Hybrid composites / WearIzvor:
International Journal of Advanced Manufacturing Technology, 2019, 100, 9-12, 2135-2146Izdavač:
- Springer London
Finansiranje / projekti:
- Istraživanje i optimizacija tehnoloških i funkcionalnih performansi ventilacionog mlina termoelektrane Kostolac B (RS-34028)
- Razvoj triboloških mikro/nano dvokomponentnih i hibridnih samopodmazujućih kompozita (RS-35021)
- Razvoj savremenih metoda dijagnostike i ispitivanja mašinskih struktura (RS-35040)
- Uticaj nano i mikrostrukturnih konstituenata na sintezu i karakteristike savremenih kompozitnih materijala sa metalnom osnovom (RS-172005)
DOI: 10.1007/s00170-018-2866-0
ISSN: 0268-3768
WoS: 000458310400001
Scopus: 2-s2.0-85055594030
Institucija/grupa
IHTMTY - JOUR AU - Vencl, Aleksandar AU - Vučetić, Filip AU - Bobić, Biljana AU - Pitel, Jan AU - Bobić, Ilija PY - 2019 UR - https://cer.ihtm.bg.ac.rs/handle/123456789/2393 AB - The influence of SiC microparticles reinforcement and graphite macroparticles addition on the friction and wear characteristics of A356 Al-Si alloys, produced by compocasting, has been assessed using a pin-on-disc tribometer. The incorporation of SiC reinforcement increased the coefficient of friction and reduced the wear. The addition of graphite did not reduce the coefficient of friction. In the case of hybrid composite with 1 wt% graphite, wear was more or less the same as with SiC reinforced composite, while in the case of hybrid composite with 3 wt% graphite, wear was further reduced. On the worn surfaces of hybrid composites, the presence of the discontinuous mixed surface layer, containing graphite and transferred counter-body material, was noticed. PB - Springer London T2 - International Journal of Advanced Manufacturing Technology T1 - Tribological characterisation in dry sliding conditions of compocasted hybrid A356/SiCp/Grp composites with graphite macroparticles VL - 100 IS - 9-12 SP - 2135 EP - 2146 DO - 10.1007/s00170-018-2866-0 ER -
@article{ author = "Vencl, Aleksandar and Vučetić, Filip and Bobić, Biljana and Pitel, Jan and Bobić, Ilija", year = "2019", abstract = "The influence of SiC microparticles reinforcement and graphite macroparticles addition on the friction and wear characteristics of A356 Al-Si alloys, produced by compocasting, has been assessed using a pin-on-disc tribometer. The incorporation of SiC reinforcement increased the coefficient of friction and reduced the wear. The addition of graphite did not reduce the coefficient of friction. In the case of hybrid composite with 1 wt% graphite, wear was more or less the same as with SiC reinforced composite, while in the case of hybrid composite with 3 wt% graphite, wear was further reduced. On the worn surfaces of hybrid composites, the presence of the discontinuous mixed surface layer, containing graphite and transferred counter-body material, was noticed.", publisher = "Springer London", journal = "International Journal of Advanced Manufacturing Technology", title = "Tribological characterisation in dry sliding conditions of compocasted hybrid A356/SiCp/Grp composites with graphite macroparticles", volume = "100", number = "9-12", pages = "2135-2146", doi = "10.1007/s00170-018-2866-0" }
Vencl, A., Vučetić, F., Bobić, B., Pitel, J.,& Bobić, I.. (2019). Tribological characterisation in dry sliding conditions of compocasted hybrid A356/SiCp/Grp composites with graphite macroparticles. in International Journal of Advanced Manufacturing Technology Springer London., 100(9-12), 2135-2146. https://doi.org/10.1007/s00170-018-2866-0
Vencl A, Vučetić F, Bobić B, Pitel J, Bobić I. Tribological characterisation in dry sliding conditions of compocasted hybrid A356/SiCp/Grp composites with graphite macroparticles. in International Journal of Advanced Manufacturing Technology. 2019;100(9-12):2135-2146. doi:10.1007/s00170-018-2866-0 .
Vencl, Aleksandar, Vučetić, Filip, Bobić, Biljana, Pitel, Jan, Bobić, Ilija, "Tribological characterisation in dry sliding conditions of compocasted hybrid A356/SiCp/Grp composites with graphite macroparticles" in International Journal of Advanced Manufacturing Technology, 100, no. 9-12 (2019):2135-2146, https://doi.org/10.1007/s00170-018-2866-0 . .