Photocatalytic degradation of azo pyridone dye: Optimization using response surface methodology
Само за регистроване кориснике
2013
Аутори
Dostanić, JasminaLončarević, Davor
Rožić, Ljiljana
Petrović, Srđan
Mijin, Dušan
Jovanović, Dušan M.
Чланак у часопису (Објављена верзија)
Метаподаци
Приказ свих података о документуАпстракт
Response surface methodology (RSM) and central composite design have been applied to describe and optimize photocatalytic degradation of azo pyridone dye using TiO2, H2O2, and simulated sun light. The mutual interactions between three independent variables, viz. H2O2 concentration, irradiation time, and TiO2 content were obtained. The results revealed that the most influential variables under selected reaction conditions were irradiation time and TiO2 content. The optimized conditions for the photocatalytic degradation of azo pyridone dye were as follows: H2O2 concentration: 130.5 mg/L, irradiation time: 54.8 min, and TiO2 content: 2.48 g/L. Under these conditions, the maximum decolorization efficiency of 96.43% was achieved. This experimental value was in good agreement with the predicted one, which proved the validity of the model. Operation cost analysis indicated that irradiation time had the major influence on total process cost. The RSM based on the central composite design was s...hown to be a successful technique for the optimization of the decolorization efficiency of azo pyridone dye and can be very helpful in improving the process economic feasibility. TOC analysis showed that the dye could be effectively mineralized during photocatalytic degradation.
Кључне речи:
Photodegradation / Azo pyridone dye / Response surface methodology / Central composite design / OptimizationИзвор:
Desalination and Water Treatment, 2013, 51, 13-15, 2802-2812Издавач:
- Desalination Publ, Hopkinton
Финансирање / пројекти:
- Наноструктурни функционални и композитни материјали у каталитичким и сорпционим процесима (RS-MESTD-Integrated and Interdisciplinary Research (IIR or III)-45001)
DOI: 10.1080/19443994.2012.750699
ISSN: 1944-3994
WoS: 000316983000033
Scopus: 2-s2.0-84875852622
Институција/група
IHTMTY - JOUR AU - Dostanić, Jasmina AU - Lončarević, Davor AU - Rožić, Ljiljana AU - Petrović, Srđan AU - Mijin, Dušan AU - Jovanović, Dušan M. PY - 2013 UR - https://cer.ihtm.bg.ac.rs/handle/123456789/1352 AB - Response surface methodology (RSM) and central composite design have been applied to describe and optimize photocatalytic degradation of azo pyridone dye using TiO2, H2O2, and simulated sun light. The mutual interactions between three independent variables, viz. H2O2 concentration, irradiation time, and TiO2 content were obtained. The results revealed that the most influential variables under selected reaction conditions were irradiation time and TiO2 content. The optimized conditions for the photocatalytic degradation of azo pyridone dye were as follows: H2O2 concentration: 130.5 mg/L, irradiation time: 54.8 min, and TiO2 content: 2.48 g/L. Under these conditions, the maximum decolorization efficiency of 96.43% was achieved. This experimental value was in good agreement with the predicted one, which proved the validity of the model. Operation cost analysis indicated that irradiation time had the major influence on total process cost. The RSM based on the central composite design was shown to be a successful technique for the optimization of the decolorization efficiency of azo pyridone dye and can be very helpful in improving the process economic feasibility. TOC analysis showed that the dye could be effectively mineralized during photocatalytic degradation. PB - Desalination Publ, Hopkinton T2 - Desalination and Water Treatment T1 - Photocatalytic degradation of azo pyridone dye: Optimization using response surface methodology VL - 51 IS - 13-15 SP - 2802 EP - 2812 DO - 10.1080/19443994.2012.750699 ER -
@article{ author = "Dostanić, Jasmina and Lončarević, Davor and Rožić, Ljiljana and Petrović, Srđan and Mijin, Dušan and Jovanović, Dušan M.", year = "2013", abstract = "Response surface methodology (RSM) and central composite design have been applied to describe and optimize photocatalytic degradation of azo pyridone dye using TiO2, H2O2, and simulated sun light. The mutual interactions between three independent variables, viz. H2O2 concentration, irradiation time, and TiO2 content were obtained. The results revealed that the most influential variables under selected reaction conditions were irradiation time and TiO2 content. The optimized conditions for the photocatalytic degradation of azo pyridone dye were as follows: H2O2 concentration: 130.5 mg/L, irradiation time: 54.8 min, and TiO2 content: 2.48 g/L. Under these conditions, the maximum decolorization efficiency of 96.43% was achieved. This experimental value was in good agreement with the predicted one, which proved the validity of the model. Operation cost analysis indicated that irradiation time had the major influence on total process cost. The RSM based on the central composite design was shown to be a successful technique for the optimization of the decolorization efficiency of azo pyridone dye and can be very helpful in improving the process economic feasibility. TOC analysis showed that the dye could be effectively mineralized during photocatalytic degradation.", publisher = "Desalination Publ, Hopkinton", journal = "Desalination and Water Treatment", title = "Photocatalytic degradation of azo pyridone dye: Optimization using response surface methodology", volume = "51", number = "13-15", pages = "2802-2812", doi = "10.1080/19443994.2012.750699" }
Dostanić, J., Lončarević, D., Rožić, L., Petrović, S., Mijin, D.,& Jovanović, D. M.. (2013). Photocatalytic degradation of azo pyridone dye: Optimization using response surface methodology. in Desalination and Water Treatment Desalination Publ, Hopkinton., 51(13-15), 2802-2812. https://doi.org/10.1080/19443994.2012.750699
Dostanić J, Lončarević D, Rožić L, Petrović S, Mijin D, Jovanović DM. Photocatalytic degradation of azo pyridone dye: Optimization using response surface methodology. in Desalination and Water Treatment. 2013;51(13-15):2802-2812. doi:10.1080/19443994.2012.750699 .
Dostanić, Jasmina, Lončarević, Davor, Rožić, Ljiljana, Petrović, Srđan, Mijin, Dušan, Jovanović, Dušan M., "Photocatalytic degradation of azo pyridone dye: Optimization using response surface methodology" in Desalination and Water Treatment, 51, no. 13-15 (2013):2802-2812, https://doi.org/10.1080/19443994.2012.750699 . .