Transport Parameters of Inkjet Printed Nanoparticle Silver on Polyimide Substrate Measured at Room and Liquid Nitrogen Temperatures
Samo za registrovane korisnike
2013
Autori
Menicanin, Aleksandar B.Zivanov, Ljiljana D.
Stojanović, Goran M.
Samardzic, Natasa M.
Randjelović, Danijela
Članak u časopisu (Objavljena verzija)
Metapodaci
Prikaz svih podataka o dokumentuApstrakt
This brief presents the transport parameters of silver layers on a polyimide substrate fabricated by an inkjet printing technology using nanoparticle inks with 20 wt% and 40 wt% silver. All the electrical characteristics of the samples were measured by Hall effect measurement system at 0.37 T. The electron mobility in inkjet printed silver layer was 7.07 and 4.58 cm(2)/V s for 20 wt% silver, 29.6 and 21.3 cm(2)/V s for 40 wt% silver at 77 and 300 K, respectively. The resistivity in inkjet printed silver layer with 20 wt% is 20.6 x 10(-6) and 27.1 x 10(-6) Omega cm, and 4.81 x 10(-6) and 8.27 x 10(-6) Omega cm for 40 wt% silver at 77 and 300 K, respectively. The surface morphology and profiles of the samples were obtained with an atomic force and scanning electron microscope.
Ključne reči:
Flexible technology / Hall measurement / inkjet printing / silver nanoparticle inkIzvor:
IEEE Transactions on Electron Devices, 2013, 60, 9, 2963-2967Izdavač:
- Ieee-Inst Electrical Electronics Engineers Inc, Piscataway
Finansiranje / projekti:
- Inovativne elektronske komponente i sistemi bazirani na neorganskim i organskim tehnologijama ugrađeni u robe i proizvode široke potrošnje (RS-MESTD-Technological Development (TD or TR)-32016)
- 0-3D nanostrukture za primenu u elektronici i obnovljivim izvorima energije: sinteza, karakterizacija i procesiranje (RS-MESTD-Integrated and Interdisciplinary Research (IIR or III)-45007)
- Mikro, nano-sistemi i senzori za primenu u elektroprivredi, procesnoj industriji i zaštiti životne sredine (RS-MESTD-Technological Development (TD or TR)-32008)
- Reinforcement of Research Potentials of the Faculty of Technical Sciences in the Field of Post Silicon Electronics (EU-FP7-256615)
DOI: 10.1109/TED.2013.2274661
ISSN: 0018-9383
WoS: 000323640300040
Scopus: 2-s2.0-84883286875
Institucija/grupa
IHTMTY - JOUR AU - Menicanin, Aleksandar B. AU - Zivanov, Ljiljana D. AU - Stojanović, Goran M. AU - Samardzic, Natasa M. AU - Randjelović, Danijela PY - 2013 UR - https://cer.ihtm.bg.ac.rs/handle/123456789/1175 AB - This brief presents the transport parameters of silver layers on a polyimide substrate fabricated by an inkjet printing technology using nanoparticle inks with 20 wt% and 40 wt% silver. All the electrical characteristics of the samples were measured by Hall effect measurement system at 0.37 T. The electron mobility in inkjet printed silver layer was 7.07 and 4.58 cm(2)/V s for 20 wt% silver, 29.6 and 21.3 cm(2)/V s for 40 wt% silver at 77 and 300 K, respectively. The resistivity in inkjet printed silver layer with 20 wt% is 20.6 x 10(-6) and 27.1 x 10(-6) Omega cm, and 4.81 x 10(-6) and 8.27 x 10(-6) Omega cm for 40 wt% silver at 77 and 300 K, respectively. The surface morphology and profiles of the samples were obtained with an atomic force and scanning electron microscope. PB - Ieee-Inst Electrical Electronics Engineers Inc, Piscataway T2 - IEEE Transactions on Electron Devices T1 - Transport Parameters of Inkjet Printed Nanoparticle Silver on Polyimide Substrate Measured at Room and Liquid Nitrogen Temperatures VL - 60 IS - 9 SP - 2963 EP - 2967 DO - 10.1109/TED.2013.2274661 ER -
@article{ author = "Menicanin, Aleksandar B. and Zivanov, Ljiljana D. and Stojanović, Goran M. and Samardzic, Natasa M. and Randjelović, Danijela", year = "2013", abstract = "This brief presents the transport parameters of silver layers on a polyimide substrate fabricated by an inkjet printing technology using nanoparticle inks with 20 wt% and 40 wt% silver. All the electrical characteristics of the samples were measured by Hall effect measurement system at 0.37 T. The electron mobility in inkjet printed silver layer was 7.07 and 4.58 cm(2)/V s for 20 wt% silver, 29.6 and 21.3 cm(2)/V s for 40 wt% silver at 77 and 300 K, respectively. The resistivity in inkjet printed silver layer with 20 wt% is 20.6 x 10(-6) and 27.1 x 10(-6) Omega cm, and 4.81 x 10(-6) and 8.27 x 10(-6) Omega cm for 40 wt% silver at 77 and 300 K, respectively. The surface morphology and profiles of the samples were obtained with an atomic force and scanning electron microscope.", publisher = "Ieee-Inst Electrical Electronics Engineers Inc, Piscataway", journal = "IEEE Transactions on Electron Devices", title = "Transport Parameters of Inkjet Printed Nanoparticle Silver on Polyimide Substrate Measured at Room and Liquid Nitrogen Temperatures", volume = "60", number = "9", pages = "2963-2967", doi = "10.1109/TED.2013.2274661" }
Menicanin, A. B., Zivanov, L. D., Stojanović, G. M., Samardzic, N. M.,& Randjelović, D.. (2013). Transport Parameters of Inkjet Printed Nanoparticle Silver on Polyimide Substrate Measured at Room and Liquid Nitrogen Temperatures. in IEEE Transactions on Electron Devices Ieee-Inst Electrical Electronics Engineers Inc, Piscataway., 60(9), 2963-2967. https://doi.org/10.1109/TED.2013.2274661
Menicanin AB, Zivanov LD, Stojanović GM, Samardzic NM, Randjelović D. Transport Parameters of Inkjet Printed Nanoparticle Silver on Polyimide Substrate Measured at Room and Liquid Nitrogen Temperatures. in IEEE Transactions on Electron Devices. 2013;60(9):2963-2967. doi:10.1109/TED.2013.2274661 .
Menicanin, Aleksandar B., Zivanov, Ljiljana D., Stojanović, Goran M., Samardzic, Natasa M., Randjelović, Danijela, "Transport Parameters of Inkjet Printed Nanoparticle Silver on Polyimide Substrate Measured at Room and Liquid Nitrogen Temperatures" in IEEE Transactions on Electron Devices, 60, no. 9 (2013):2963-2967, https://doi.org/10.1109/TED.2013.2274661 . .