Using the Low-Cost Waste Materials for Heavy Metals Removal from the Mine Wastewater
2011
Autori
Marković, RadmilaStevanović, Jasmina
Stevanović, Zoran
Bugarin, Mile
Nedeljković, Dragutin
Grujić, Aleksandar
Stajić-Trošić, Jasna
Članak u časopisu (Objavljena verzija)
Metapodaci
Prikaz svih podataka o dokumentuApstrakt
The possibility of application of low-cost and easily available materials such as cardboard or sawdust for the heavy metals removal from the acid mine water was investigated. The sawdust was obtained from oak and fir-wood. Those materials were tested on the real acid mine wastewater that contained copper, iron, zinc, nickel, and manganese in the concentrations above the maximal allowed level. The adsorption degrees of those elements were investigated. The results were shown that the iron was mechanically removed. The results of chemical analysis of effluent obtained by the use of sawdust from fir-wood indicate that the values for iron and nickel ions were lower than allowed values by the legislative direction. The highest value for copper adsorption degree of 98.31% was achieved at pH value of 7.94. Content of manganese in the effluent and at the end of process, was near the initial value. Using the sawdust obtained from oak as the adsorption material, zinc and manganese concentration ...in the effluent was near the start values and copper and iron content was decreased but the values were higher than allowed. Using the cardboard, the copper adsorption degree was up to 95 mass%, iron content was under the limit value for the applied chemical detection method. The content of the manganese was not changed and the content of the zinc was decreased but the concentration was over the maximum allowed value. [doi:10.2320/matertrans.M2011191]
Ključne reči:
mine wastewater / heavy metals removal / low-cost adsorption materialsIzvor:
Materials Transactions, 2011, 52, 10, 1849-1852Izdavač:
- Japan Inst Metals, Sendai
Finansiranje / projekti:
- Uticaj rudarskog otpada iz RTB-a Bor na zagađenje vodotokova sa predlogom mera i postupaka za smanjenje štetnog dejstva na životnu sredinu (RS-37001)
- Razvoj opreme i procesa dobijanja polimernih kompozitnih materijala sa unapred definisanim funkcionalnim svojstvima (RS-34011)
DOI: 10.2320/matertrans.M2011191
ISSN: 1345-9678
WoS: 000297181800001
Scopus: 2-s2.0-80655141860
Institucija/grupa
IHTMTY - JOUR AU - Marković, Radmila AU - Stevanović, Jasmina AU - Stevanović, Zoran AU - Bugarin, Mile AU - Nedeljković, Dragutin AU - Grujić, Aleksandar AU - Stajić-Trošić, Jasna PY - 2011 UR - https://cer.ihtm.bg.ac.rs/handle/123456789/844 AB - The possibility of application of low-cost and easily available materials such as cardboard or sawdust for the heavy metals removal from the acid mine water was investigated. The sawdust was obtained from oak and fir-wood. Those materials were tested on the real acid mine wastewater that contained copper, iron, zinc, nickel, and manganese in the concentrations above the maximal allowed level. The adsorption degrees of those elements were investigated. The results were shown that the iron was mechanically removed. The results of chemical analysis of effluent obtained by the use of sawdust from fir-wood indicate that the values for iron and nickel ions were lower than allowed values by the legislative direction. The highest value for copper adsorption degree of 98.31% was achieved at pH value of 7.94. Content of manganese in the effluent and at the end of process, was near the initial value. Using the sawdust obtained from oak as the adsorption material, zinc and manganese concentration in the effluent was near the start values and copper and iron content was decreased but the values were higher than allowed. Using the cardboard, the copper adsorption degree was up to 95 mass%, iron content was under the limit value for the applied chemical detection method. The content of the manganese was not changed and the content of the zinc was decreased but the concentration was over the maximum allowed value. [doi:10.2320/matertrans.M2011191] PB - Japan Inst Metals, Sendai T2 - Materials Transactions T1 - Using the Low-Cost Waste Materials for Heavy Metals Removal from the Mine Wastewater VL - 52 IS - 10 SP - 1849 EP - 1852 DO - 10.2320/matertrans.M2011191 ER -
@article{ author = "Marković, Radmila and Stevanović, Jasmina and Stevanović, Zoran and Bugarin, Mile and Nedeljković, Dragutin and Grujić, Aleksandar and Stajić-Trošić, Jasna", year = "2011", abstract = "The possibility of application of low-cost and easily available materials such as cardboard or sawdust for the heavy metals removal from the acid mine water was investigated. The sawdust was obtained from oak and fir-wood. Those materials were tested on the real acid mine wastewater that contained copper, iron, zinc, nickel, and manganese in the concentrations above the maximal allowed level. The adsorption degrees of those elements were investigated. The results were shown that the iron was mechanically removed. The results of chemical analysis of effluent obtained by the use of sawdust from fir-wood indicate that the values for iron and nickel ions were lower than allowed values by the legislative direction. The highest value for copper adsorption degree of 98.31% was achieved at pH value of 7.94. Content of manganese in the effluent and at the end of process, was near the initial value. Using the sawdust obtained from oak as the adsorption material, zinc and manganese concentration in the effluent was near the start values and copper and iron content was decreased but the values were higher than allowed. Using the cardboard, the copper adsorption degree was up to 95 mass%, iron content was under the limit value for the applied chemical detection method. The content of the manganese was not changed and the content of the zinc was decreased but the concentration was over the maximum allowed value. [doi:10.2320/matertrans.M2011191]", publisher = "Japan Inst Metals, Sendai", journal = "Materials Transactions", title = "Using the Low-Cost Waste Materials for Heavy Metals Removal from the Mine Wastewater", volume = "52", number = "10", pages = "1849-1852", doi = "10.2320/matertrans.M2011191" }
Marković, R., Stevanović, J., Stevanović, Z., Bugarin, M., Nedeljković, D., Grujić, A.,& Stajić-Trošić, J.. (2011). Using the Low-Cost Waste Materials for Heavy Metals Removal from the Mine Wastewater. in Materials Transactions Japan Inst Metals, Sendai., 52(10), 1849-1852. https://doi.org/10.2320/matertrans.M2011191
Marković R, Stevanović J, Stevanović Z, Bugarin M, Nedeljković D, Grujić A, Stajić-Trošić J. Using the Low-Cost Waste Materials for Heavy Metals Removal from the Mine Wastewater. in Materials Transactions. 2011;52(10):1849-1852. doi:10.2320/matertrans.M2011191 .
Marković, Radmila, Stevanović, Jasmina, Stevanović, Zoran, Bugarin, Mile, Nedeljković, Dragutin, Grujić, Aleksandar, Stajić-Trošić, Jasna, "Using the Low-Cost Waste Materials for Heavy Metals Removal from the Mine Wastewater" in Materials Transactions, 52, no. 10 (2011):1849-1852, https://doi.org/10.2320/matertrans.M2011191 . .