Procedures in Testing the Mechanical Characteristics of Composite Structures and the Possibility of Application to Biodegradable Materials: An Overview
Samo za registrovane korisnike
2023
Konferencijski prilog (Objavljena verzija)
,
International Sustainable Aviation and Energy Research Society
Metapodaci
Prikaz svih podataka o dokumentuApstrakt
This paper presents the static testing of the composite material's mechanical characteristics. An overview of the standards is made by which various tests are performed, and then an analysis of the results of the parameters obtained by the conventional method-stretching and optical (DIC system-bending) of carbon epoxy composite structures is given. These results represented the basis for the preparation and further application of biocomposite materials; that is, the testing procedure will be performed identically on composites containing mycelia. The mould for pressing biomaterial connected with mycelium is made of two parts. The primary purpose of the mould is to bring the loose natural material into a solid preparation following the standards ASTM D3039 and ASTM D7078, which include testing the technologically prepared and hardened sample for bending and shearing.
Ključne reči:
composite / biomaterial / experimental testing / mechanical characteristics / DIC systemIzvor:
International Symposium on Aircraft Technology ISATECH’22, Abstract Book, 2023, 44-44Izdavač:
- International Sustainable Aviation and Energy Research Society
Finansiranje / projekti:
- Ministarstvo nauke, tehnološkog razvoja i inovacija Republike Srbije, institucionalno finansiranje - 200026 (Univerzitet u Beogradu, Institut za hemiju, tehnologiju i metalurgiju - IHTM) (RS-MESTD-inst-2020-200026)
Institucija/grupa
IHTMTY - CONF AU - Baltić, Marija AU - Ivanović, Milica AU - Tanović, Dragoljub AU - Vorkapić, Miloš AU - Mladenović, Ivana PY - 2023 UR - https://cer.ihtm.bg.ac.rs/handle/123456789/7055 AB - This paper presents the static testing of the composite material's mechanical characteristics. An overview of the standards is made by which various tests are performed, and then an analysis of the results of the parameters obtained by the conventional method-stretching and optical (DIC system-bending) of carbon epoxy composite structures is given. These results represented the basis for the preparation and further application of biocomposite materials; that is, the testing procedure will be performed identically on composites containing mycelia. The mould for pressing biomaterial connected with mycelium is made of two parts. The primary purpose of the mould is to bring the loose natural material into a solid preparation following the standards ASTM D3039 and ASTM D7078, which include testing the technologically prepared and hardened sample for bending and shearing. PB - International Sustainable Aviation and Energy Research Society C3 - International Symposium on Aircraft Technology ISATECH’22, Abstract Book T1 - Procedures in Testing the Mechanical Characteristics of Composite Structures and the Possibility of Application to Biodegradable Materials: An Overview SP - 44 EP - 44 UR - https://hdl.handle.net/21.15107/rcub_cer_7055 ER -
@conference{ author = "Baltić, Marija and Ivanović, Milica and Tanović, Dragoljub and Vorkapić, Miloš and Mladenović, Ivana", year = "2023", abstract = "This paper presents the static testing of the composite material's mechanical characteristics. An overview of the standards is made by which various tests are performed, and then an analysis of the results of the parameters obtained by the conventional method-stretching and optical (DIC system-bending) of carbon epoxy composite structures is given. These results represented the basis for the preparation and further application of biocomposite materials; that is, the testing procedure will be performed identically on composites containing mycelia. The mould for pressing biomaterial connected with mycelium is made of two parts. The primary purpose of the mould is to bring the loose natural material into a solid preparation following the standards ASTM D3039 and ASTM D7078, which include testing the technologically prepared and hardened sample for bending and shearing.", publisher = "International Sustainable Aviation and Energy Research Society", journal = "International Symposium on Aircraft Technology ISATECH’22, Abstract Book", title = "Procedures in Testing the Mechanical Characteristics of Composite Structures and the Possibility of Application to Biodegradable Materials: An Overview", pages = "44-44", url = "https://hdl.handle.net/21.15107/rcub_cer_7055" }
Baltić, M., Ivanović, M., Tanović, D., Vorkapić, M.,& Mladenović, I.. (2023). Procedures in Testing the Mechanical Characteristics of Composite Structures and the Possibility of Application to Biodegradable Materials: An Overview. in International Symposium on Aircraft Technology ISATECH’22, Abstract Book International Sustainable Aviation and Energy Research Society., 44-44. https://hdl.handle.net/21.15107/rcub_cer_7055
Baltić M, Ivanović M, Tanović D, Vorkapić M, Mladenović I. Procedures in Testing the Mechanical Characteristics of Composite Structures and the Possibility of Application to Biodegradable Materials: An Overview. in International Symposium on Aircraft Technology ISATECH’22, Abstract Book. 2023;:44-44. https://hdl.handle.net/21.15107/rcub_cer_7055 .
Baltić, Marija, Ivanović, Milica, Tanović, Dragoljub, Vorkapić, Miloš, Mladenović, Ivana, "Procedures in Testing the Mechanical Characteristics of Composite Structures and the Possibility of Application to Biodegradable Materials: An Overview" in International Symposium on Aircraft Technology ISATECH’22, Abstract Book (2023):44-44, https://hdl.handle.net/21.15107/rcub_cer_7055 .