Electrical conductivity of the electrodeposited copper powder filled lignocellulose composites
Електрична проводљивост лигноцелулозних композита пуњених електролитичким бакарним прахом
2014
Аутори
Pavlović, MiroslavGligorić, Miladin
Ćosović, Vladan
Bojanić, Vaso
Tomić, Milorad
Pavlović, Miomir
Чланак у часопису (Објављена верзија)
Метаподаци
Приказ свих података о документуАпстракт
This article deals with the synthesis and characterization of electroconductive composite materials prepared by the compression molding of mixtures of lignocellulose and electrochemically deposited copper powder under different pressures, as well as with the investigation of the influence of particle morphology on conductivity and the percolation threshold of obtained composites. Electrodeposited copper powder content varied from 1.9-29.4 vol%. The analysis of the most significant properties of prepared composites and its components included impedance spectroscopy (IS) behavior, the measurements of electrical conductivity, scanning electron microscopy (SEM) and structural analysis. It has been shown that the percolation threshold (PT) depends on both particle shape and the type of spatial distribution. IS measurements and SEM analysis have shown that particles that have pronounced grain boundaries have a bit effect on the appearance of electric conductive pathways thus on the composite... conductivity. The packaging effect and more pronounced interparticle contact with copper powder particles lead to the “movement” of PT, which, for the particles <45 μm and the highest processing pressure of 27 MPa, was 7.2% (v/v).
У овом раду приказана је синтеза и карактеризација електропроводних композитних материјала на бази лигноцелулoзе и електрохемијски добијеног бакарног праха добијених хладним пресовањем на различитим притисцима, као и испитивање утицаја морфологије праха на проводност и перколациони праг добијених композита. Запремински удео бакарног праха је варирао 1.9−29.4% (v/v). Анализа најзначајнијих особина припремљених композита обухватала је импедансну спектроскопију (IS), скенирајућу електронску микроскопију (SEM), мерења електричне проводности и структурну анализу. Показано је да перколациони праг (PP) зависи како од облика честица тако и од њиховог просторног уређења. IS мерења и SEM анализе су показали да морфологија честица са изражено великом границом зрна има
велики утицај на појаву електричних проводних слојева. Ефекат паковања и израженији међучестични контакт са честицама бакарног праха доводи до „померања” PP, који је за честице <45 μm и највеćи притисак од 27 MPa износио 7.2% (v/v)....
Кључне речи:
impedance spectroscopy / electrolytic copper powder / lignocellulose / composite / impedansna spektroskopija / elektrolitički bakarni prah / lignoceluloza / kompozitИзвор:
Contemporary materials, 2014, V, 2, 203-211Издавач:
- Banja Luka, Republika Srpska, Bosna i Hercegovina : Akademija nauka i umetnosti Republike Srpske
Финансирање / пројекти:
- "Electroconducting composite materials based on lignocellulose and copper powders prepared by constant and programmed current-voltage electrolysis regimes“ (ELBAKOM140283), Ministry of Science and Technology of the Republic of Srpska
Институција/група
IHTMTY - JOUR AU - Pavlović, Miroslav AU - Gligorić, Miladin AU - Ćosović, Vladan AU - Bojanić, Vaso AU - Tomić, Milorad AU - Pavlović, Miomir PY - 2014 UR - https://cer.ihtm.bg.ac.rs/handle/123456789/6661 AB - This article deals with the synthesis and characterization of electroconductive composite materials prepared by the compression molding of mixtures of lignocellulose and electrochemically deposited copper powder under different pressures, as well as with the investigation of the influence of particle morphology on conductivity and the percolation threshold of obtained composites. Electrodeposited copper powder content varied from 1.9-29.4 vol%. The analysis of the most significant properties of prepared composites and its components included impedance spectroscopy (IS) behavior, the measurements of electrical conductivity, scanning electron microscopy (SEM) and structural analysis. It has been shown that the percolation threshold (PT) depends on both particle shape and the type of spatial distribution. IS measurements and SEM analysis have shown that particles that have pronounced grain boundaries have a bit effect on the appearance of electric conductive pathways thus on the composite conductivity. The packaging effect and more pronounced interparticle contact with copper powder particles lead to the “movement” of PT, which, for the particles <45 μm and the highest processing pressure of 27 MPa, was 7.2% (v/v). AB - У овом раду приказана је синтеза и карактеризација електропроводних композитних материјала на бази лигноцелулoзе и електрохемијски добијеног бакарног праха добијених хладним пресовањем на различитим притисцима, као и испитивање утицаја морфологије праха на проводност и перколациони праг добијених композита. Запремински удео бакарног праха је варирао 1.9−29.4% (v/v). Анализа најзначајнијих особина припремљених композита обухватала је импедансну спектроскопију (IS), скенирајућу електронску микроскопију (SEM), мерења електричне проводности и структурну анализу. Показано је да перколациони праг (PP) зависи како од облика честица тако и од њиховог просторног уређења. IS мерења и SEM анализе су показали да морфологија честица са изражено великом границом зрна има велики утицај на појаву електричних проводних слојева. Ефекат паковања и израженији међучестични контакт са честицама бакарног праха доводи до „померања” PP, који је за честице <45 μm и највеćи притисак од 27 MPa износио 7.2% (v/v). PB - Banja Luka, Republika Srpska, Bosna i Hercegovina : Akademija nauka i umetnosti Republike Srpske T2 - Contemporary materials T1 - Electrical conductivity of the electrodeposited copper powder filled lignocellulose composites T1 - Електрична проводљивост лигноцелулозних композита пуњених електролитичким бакарним прахом VL - V IS - 2 SP - 203 EP - 211 DO - 10.7251/COMEN1402203P ER -
@article{ author = "Pavlović, Miroslav and Gligorić, Miladin and Ćosović, Vladan and Bojanić, Vaso and Tomić, Milorad and Pavlović, Miomir", year = "2014", abstract = "This article deals with the synthesis and characterization of electroconductive composite materials prepared by the compression molding of mixtures of lignocellulose and electrochemically deposited copper powder under different pressures, as well as with the investigation of the influence of particle morphology on conductivity and the percolation threshold of obtained composites. Electrodeposited copper powder content varied from 1.9-29.4 vol%. The analysis of the most significant properties of prepared composites and its components included impedance spectroscopy (IS) behavior, the measurements of electrical conductivity, scanning electron microscopy (SEM) and structural analysis. It has been shown that the percolation threshold (PT) depends on both particle shape and the type of spatial distribution. IS measurements and SEM analysis have shown that particles that have pronounced grain boundaries have a bit effect on the appearance of electric conductive pathways thus on the composite conductivity. The packaging effect and more pronounced interparticle contact with copper powder particles lead to the “movement” of PT, which, for the particles <45 μm and the highest processing pressure of 27 MPa, was 7.2% (v/v)., У овом раду приказана је синтеза и карактеризација електропроводних композитних материјала на бази лигноцелулoзе и електрохемијски добијеног бакарног праха добијених хладним пресовањем на различитим притисцима, као и испитивање утицаја морфологије праха на проводност и перколациони праг добијених композита. Запремински удео бакарног праха је варирао 1.9−29.4% (v/v). Анализа најзначајнијих особина припремљених композита обухватала је импедансну спектроскопију (IS), скенирајућу електронску микроскопију (SEM), мерења електричне проводности и структурну анализу. Показано је да перколациони праг (PP) зависи како од облика честица тако и од њиховог просторног уређења. IS мерења и SEM анализе су показали да морфологија честица са изражено великом границом зрна има велики утицај на појаву електричних проводних слојева. Ефекат паковања и израженији међучестични контакт са честицама бакарног праха доводи до „померања” PP, који је за честице <45 μm и највеćи притисак од 27 MPa износио 7.2% (v/v).", publisher = "Banja Luka, Republika Srpska, Bosna i Hercegovina : Akademija nauka i umetnosti Republike Srpske", journal = "Contemporary materials", title = "Electrical conductivity of the electrodeposited copper powder filled lignocellulose composites, Електрична проводљивост лигноцелулозних композита пуњених електролитичким бакарним прахом", volume = "V", number = "2", pages = "203-211", doi = "10.7251/COMEN1402203P" }
Pavlović, M., Gligorić, M., Ćosović, V., Bojanić, V., Tomić, M.,& Pavlović, M.. (2014). Electrical conductivity of the electrodeposited copper powder filled lignocellulose composites. in Contemporary materials Banja Luka, Republika Srpska, Bosna i Hercegovina : Akademija nauka i umetnosti Republike Srpske., V(2), 203-211. https://doi.org/10.7251/COMEN1402203P
Pavlović M, Gligorić M, Ćosović V, Bojanić V, Tomić M, Pavlović M. Electrical conductivity of the electrodeposited copper powder filled lignocellulose composites. in Contemporary materials. 2014;V(2):203-211. doi:10.7251/COMEN1402203P .
Pavlović, Miroslav, Gligorić, Miladin, Ćosović, Vladan, Bojanić, Vaso, Tomić, Milorad, Pavlović, Miomir, "Electrical conductivity of the electrodeposited copper powder filled lignocellulose composites" in Contemporary materials, V, no. 2 (2014):203-211, https://doi.org/10.7251/COMEN1402203P . .