Assembling biomaterial specimens in a mould made of thermoplastic polymer: 3-point bending test
Конференцијски прилог (Објављена верзија)
Метаподаци
Приказ свих података о документуАпстракт
The utilization of biomaterials with mycelia as a stabilizing agent is gaining popularity in the fields of construction and architecture, offering a sustainable solution aligned with the principles of the circular economy. Interdisciplinary research involving biologists, technologists, and engineers is necessary to advance this field where science, art and design converge. These biomaterials contribute to energy reduction and cost-effectiveness, utilizing readily available and recyclable raw materials. Mycelium-based blocks have shown to be more affordable than traditional cement and gypsum blocks while significantly reducing CO2 emissions. The mycelium network, formed by hyphae, can be cultivated into a solid material, providing a defined technological process. This study focusses on performing 3-point bending testing on moulded specimens using additive technology PLA material, following the ASTM D1037 standard. After the growth of mycelium and the formation of the test tube-shaped st...ructure, the samples are dried and characterized to enchance their mechanical characteristics.
Кључне речи:
Biomaterials / mycelia / additive technology / mold / bending testИзвор:
Program and the Book of Abstracts - International Conference of Experimental and Numerical Investigations and New Technologies, CNN TECH 2022, 05 – 08 July 2022, Zlatibor, Serbia, 2023, 28-28Издавач:
- Belgrade : Innovation Center of Faculty of Mechanical Engineering
Финансирање / пројекти:
- Министарство науке, технолошког развоја и иновација Републике Србије, институционално финансирање - 200026 (Универзитет у Београду, Институт за хемију, технологију и металургију - ИХТМ) (RS-MESTD-inst-2020-200026)
- Министарство науке, технолошког развоја и иновација Републике Србије, институционално финансирање - 200105 (Универзитет у Београду, Машински факултет) (RS-MESTD-inst-2020-200105)
Институција/група
IHTMTY - CONF AU - Baltić, Marija AU - Vorkapić, Miloš AU - Simonović, Aleksandar AU - Ivanov, Toni AU - Tanović, Dragoljub PY - 2023 UR - https://cer.ihtm.bg.ac.rs/handle/123456789/6364 AB - The utilization of biomaterials with mycelia as a stabilizing agent is gaining popularity in the fields of construction and architecture, offering a sustainable solution aligned with the principles of the circular economy. Interdisciplinary research involving biologists, technologists, and engineers is necessary to advance this field where science, art and design converge. These biomaterials contribute to energy reduction and cost-effectiveness, utilizing readily available and recyclable raw materials. Mycelium-based blocks have shown to be more affordable than traditional cement and gypsum blocks while significantly reducing CO2 emissions. The mycelium network, formed by hyphae, can be cultivated into a solid material, providing a defined technological process. This study focusses on performing 3-point bending testing on moulded specimens using additive technology PLA material, following the ASTM D1037 standard. After the growth of mycelium and the formation of the test tube-shaped structure, the samples are dried and characterized to enchance their mechanical characteristics. PB - Belgrade : Innovation Center of Faculty of Mechanical Engineering C3 - Program and the Book of Abstracts - International Conference of Experimental and Numerical Investigations and New Technologies, CNN TECH 2022, 05 – 08 July 2022, Zlatibor, Serbia T1 - Assembling biomaterial specimens in a mould made of thermoplastic polymer: 3-point bending test SP - 28 EP - 28 UR - https://hdl.handle.net/21.15107/rcub_cer_6364 ER -
@conference{ author = "Baltić, Marija and Vorkapić, Miloš and Simonović, Aleksandar and Ivanov, Toni and Tanović, Dragoljub", year = "2023", abstract = "The utilization of biomaterials with mycelia as a stabilizing agent is gaining popularity in the fields of construction and architecture, offering a sustainable solution aligned with the principles of the circular economy. Interdisciplinary research involving biologists, technologists, and engineers is necessary to advance this field where science, art and design converge. These biomaterials contribute to energy reduction and cost-effectiveness, utilizing readily available and recyclable raw materials. Mycelium-based blocks have shown to be more affordable than traditional cement and gypsum blocks while significantly reducing CO2 emissions. The mycelium network, formed by hyphae, can be cultivated into a solid material, providing a defined technological process. This study focusses on performing 3-point bending testing on moulded specimens using additive technology PLA material, following the ASTM D1037 standard. After the growth of mycelium and the formation of the test tube-shaped structure, the samples are dried and characterized to enchance their mechanical characteristics.", publisher = "Belgrade : Innovation Center of Faculty of Mechanical Engineering", journal = "Program and the Book of Abstracts - International Conference of Experimental and Numerical Investigations and New Technologies, CNN TECH 2022, 05 – 08 July 2022, Zlatibor, Serbia", title = "Assembling biomaterial specimens in a mould made of thermoplastic polymer: 3-point bending test", pages = "28-28", url = "https://hdl.handle.net/21.15107/rcub_cer_6364" }
Baltić, M., Vorkapić, M., Simonović, A., Ivanov, T.,& Tanović, D.. (2023). Assembling biomaterial specimens in a mould made of thermoplastic polymer: 3-point bending test. in Program and the Book of Abstracts - International Conference of Experimental and Numerical Investigations and New Technologies, CNN TECH 2022, 05 – 08 July 2022, Zlatibor, Serbia Belgrade : Innovation Center of Faculty of Mechanical Engineering., 28-28. https://hdl.handle.net/21.15107/rcub_cer_6364
Baltić M, Vorkapić M, Simonović A, Ivanov T, Tanović D. Assembling biomaterial specimens in a mould made of thermoplastic polymer: 3-point bending test. in Program and the Book of Abstracts - International Conference of Experimental and Numerical Investigations and New Technologies, CNN TECH 2022, 05 – 08 July 2022, Zlatibor, Serbia. 2023;:28-28. https://hdl.handle.net/21.15107/rcub_cer_6364 .
Baltić, Marija, Vorkapić, Miloš, Simonović, Aleksandar, Ivanov, Toni, Tanović, Dragoljub, "Assembling biomaterial specimens in a mould made of thermoplastic polymer: 3-point bending test" in Program and the Book of Abstracts - International Conference of Experimental and Numerical Investigations and New Technologies, CNN TECH 2022, 05 – 08 July 2022, Zlatibor, Serbia (2023):28-28, https://hdl.handle.net/21.15107/rcub_cer_6364 .