Carbon monoxide oxidation on Au(111) surface decorated by spontaneously deposited Pt
Abstract
Platinum is deposited spontaneously on Au(1 1 1) surface from 1 mM H2PtCl6 + 1 M HClO4 solution using multiple deposition procedure. X-ray photoelectron spectroscopy (XPS) analysis has shown that after immersion into the Pt containing solution and rinsing with water, Pt(OH)2 resides on the Au(1 1 1) substrate. Consecutive depositions as well as in situ scanning tunneling microscopy (STM) and electrochemical measurements are performed on previously electrochemically reduced Pt/Au(1 1 1) surfaces. Only homogeneous distribution of thus deposited Pt islands is observed by in situ STM. With subsequent depositions, the width of deposited Pt islands increases, but stays lower than 10 nm, while a significant increase of Pt islands height is observed, leading to moderate increase of the coverage. Cyclic voltammetry (CV) profiles of obtained Pt/Au(1 1 1) surfaces, and CO stripping curves are recorded in 0.5 M H2SO4 solution. CO oxidation takes place only at higher potentials shifting negatively ...with increasing coverage. This is discussed with respect to Pt islands width and height distributions and to the influence of the Au(1 1 1) substrate surface.
Keywords:
Scanning tunneling microscopy / CO oxidation / X-ray photoelectron spectroscopy / Platinum / Spontaneous depositionSource:
Electrochimica Acta, 2007, 53, 2, 998-1005Publisher:
- Elsevier
Funding / projects:
DOI: 10.1016/j.electacta.2007.08.019
ISSN: 00134686
WoS: 000251480900097
Scopus: 2-s2.0-35148832174
Collections
Institution/Community
IHTMTY - JOUR AU - Štrbac, Svetlana AU - Petrovic, S. AU - Vasilic, R. AU - Kovac, J. AU - Zalar, A. AU - Rakocevic, Z. PY - 2007 UR - https://cer.ihtm.bg.ac.rs/handle/123456789/3190 AB - Platinum is deposited spontaneously on Au(1 1 1) surface from 1 mM H2PtCl6 + 1 M HClO4 solution using multiple deposition procedure. X-ray photoelectron spectroscopy (XPS) analysis has shown that after immersion into the Pt containing solution and rinsing with water, Pt(OH)2 resides on the Au(1 1 1) substrate. Consecutive depositions as well as in situ scanning tunneling microscopy (STM) and electrochemical measurements are performed on previously electrochemically reduced Pt/Au(1 1 1) surfaces. Only homogeneous distribution of thus deposited Pt islands is observed by in situ STM. With subsequent depositions, the width of deposited Pt islands increases, but stays lower than 10 nm, while a significant increase of Pt islands height is observed, leading to moderate increase of the coverage. Cyclic voltammetry (CV) profiles of obtained Pt/Au(1 1 1) surfaces, and CO stripping curves are recorded in 0.5 M H2SO4 solution. CO oxidation takes place only at higher potentials shifting negatively with increasing coverage. This is discussed with respect to Pt islands width and height distributions and to the influence of the Au(1 1 1) substrate surface. PB - Elsevier T2 - Electrochimica Acta T1 - Carbon monoxide oxidation on Au(111) surface decorated by spontaneously deposited Pt VL - 53 IS - 2 SP - 998 EP - 1005 DO - 10.1016/j.electacta.2007.08.019 ER -
@article{ author = "Štrbac, Svetlana and Petrovic, S. and Vasilic, R. and Kovac, J. and Zalar, A. and Rakocevic, Z.", year = "2007", abstract = "Platinum is deposited spontaneously on Au(1 1 1) surface from 1 mM H2PtCl6 + 1 M HClO4 solution using multiple deposition procedure. X-ray photoelectron spectroscopy (XPS) analysis has shown that after immersion into the Pt containing solution and rinsing with water, Pt(OH)2 resides on the Au(1 1 1) substrate. Consecutive depositions as well as in situ scanning tunneling microscopy (STM) and electrochemical measurements are performed on previously electrochemically reduced Pt/Au(1 1 1) surfaces. Only homogeneous distribution of thus deposited Pt islands is observed by in situ STM. With subsequent depositions, the width of deposited Pt islands increases, but stays lower than 10 nm, while a significant increase of Pt islands height is observed, leading to moderate increase of the coverage. Cyclic voltammetry (CV) profiles of obtained Pt/Au(1 1 1) surfaces, and CO stripping curves are recorded in 0.5 M H2SO4 solution. CO oxidation takes place only at higher potentials shifting negatively with increasing coverage. This is discussed with respect to Pt islands width and height distributions and to the influence of the Au(1 1 1) substrate surface.", publisher = "Elsevier", journal = "Electrochimica Acta", title = "Carbon monoxide oxidation on Au(111) surface decorated by spontaneously deposited Pt", volume = "53", number = "2", pages = "998-1005", doi = "10.1016/j.electacta.2007.08.019" }
Štrbac, S., Petrovic, S., Vasilic, R., Kovac, J., Zalar, A.,& Rakocevic, Z.. (2007). Carbon monoxide oxidation on Au(111) surface decorated by spontaneously deposited Pt. in Electrochimica Acta Elsevier., 53(2), 998-1005. https://doi.org/10.1016/j.electacta.2007.08.019
Štrbac S, Petrovic S, Vasilic R, Kovac J, Zalar A, Rakocevic Z. Carbon monoxide oxidation on Au(111) surface decorated by spontaneously deposited Pt. in Electrochimica Acta. 2007;53(2):998-1005. doi:10.1016/j.electacta.2007.08.019 .
Štrbac, Svetlana, Petrovic, S., Vasilic, R., Kovac, J., Zalar, A., Rakocevic, Z., "Carbon monoxide oxidation on Au(111) surface decorated by spontaneously deposited Pt" in Electrochimica Acta, 53, no. 2 (2007):998-1005, https://doi.org/10.1016/j.electacta.2007.08.019 . .