Effect of Al2O3 nanoparticles and strontium addition on structural, mechanical and tribological properties of Zn25Al3Si alloy
Само за регистроване кориснике
2018
Чланак у часопису (Објављена верзија)
Метаподаци
Приказ свих података о документуАпстракт
Nanocomposites were synthesized via compocasting using Zn25Al3Si and Zn25Al3Si0.03Sr alloys as the matrices and nanoparticles of Al2O3 (1 wt%) as the reinforcement. Structure of the nanocomposites was examined, and their basic mechanical and tribological properties were tested. Distribution of primary silicon particles in the structure of nanocomposites has been improved compared to their distribution in the Zn25Al3Si matrix alloy due to the presence of Al2O3 nanoparticles and strontium. The primary silicon particles in the structure of the nanocomposites were found to be more fine-grained compared to the same particles in the structure of the as-cast Zn25Al3Si alloy. Tested mechanical properties of the nanocomposite with Zn25Al3Si alloy matrix are improved, compared to the matrix alloy. The nanocomposite with Zn25Al3Si0.03Sr alloy matrix is characterized with slightly higher value of compressive yield strength and a slightly lower hardness value compared to the as-cast Zn25Al3Si alloy.... Both nanocomposites showed lower wear rate and higher coefficient of friction, compared to the matrix alloy, in sliding under the boundary lubricating regime. However, the nanocomposite with Zn25Al3Si alloy matrix showed better tribological properties than the nanocomposite with Zn25Al3Si0.03Sr alloy matrix.
Кључне речи:
Zn-Al-Si alloys / Strontium / Al2O3 nanoparticles / Microstructure / Fractography / Mechanical properties / Boundary lubrication / Friction / WearИзвор:
Journal of the Brazilian Society of Mechanical Sciences and Engineering, 2018, 40, 11Издавач:
- Springer Heidelberg, Heidelberg
Финансирање / пројекти:
- Republic of Serbia, Ministry of Education, Science and Technological Development
- Ministry of Education, Youth and Sports of Czech Republic - FSI-S-14-2336
- Утицај нано и микроструктурних конституената на синтезу и карактеристике савремених композитних материјала са металном основом (RS-MESTD-Basic Research (BR or ON)-172005)
- Развој триболошких микро/нано двокомпонентних и хибридних самоподмазујућих композита (RS-MESTD-Technological Development (TD or TR)-35021)
- Научно-технолошка подршка унапређењу безбедности специјалних друмских и шинских возила (RS-MESTD-Technological Development (TD or TR)-35045)
DOI: 10.1007/s40430-018-1441-9
ISSN: 1678-5878
WoS: 000446746200003
Scopus: 2-s2.0-85054827006
Институција/група
IHTMTY - JOUR AU - Vencl, Aleksandar AU - Bobić, Biljana AU - Vučetić, Filip AU - Svoboda, Petr AU - Popović, Vladimir AU - Bobić, Ilija PY - 2018 UR - https://cer.ihtm.bg.ac.rs/handle/123456789/2370 AB - Nanocomposites were synthesized via compocasting using Zn25Al3Si and Zn25Al3Si0.03Sr alloys as the matrices and nanoparticles of Al2O3 (1 wt%) as the reinforcement. Structure of the nanocomposites was examined, and their basic mechanical and tribological properties were tested. Distribution of primary silicon particles in the structure of nanocomposites has been improved compared to their distribution in the Zn25Al3Si matrix alloy due to the presence of Al2O3 nanoparticles and strontium. The primary silicon particles in the structure of the nanocomposites were found to be more fine-grained compared to the same particles in the structure of the as-cast Zn25Al3Si alloy. Tested mechanical properties of the nanocomposite with Zn25Al3Si alloy matrix are improved, compared to the matrix alloy. The nanocomposite with Zn25Al3Si0.03Sr alloy matrix is characterized with slightly higher value of compressive yield strength and a slightly lower hardness value compared to the as-cast Zn25Al3Si alloy. Both nanocomposites showed lower wear rate and higher coefficient of friction, compared to the matrix alloy, in sliding under the boundary lubricating regime. However, the nanocomposite with Zn25Al3Si alloy matrix showed better tribological properties than the nanocomposite with Zn25Al3Si0.03Sr alloy matrix. PB - Springer Heidelberg, Heidelberg T2 - Journal of the Brazilian Society of Mechanical Sciences and Engineering T1 - Effect of Al2O3 nanoparticles and strontium addition on structural, mechanical and tribological properties of Zn25Al3Si alloy VL - 40 IS - 11 DO - 10.1007/s40430-018-1441-9 ER -
@article{ author = "Vencl, Aleksandar and Bobić, Biljana and Vučetić, Filip and Svoboda, Petr and Popović, Vladimir and Bobić, Ilija", year = "2018", abstract = "Nanocomposites were synthesized via compocasting using Zn25Al3Si and Zn25Al3Si0.03Sr alloys as the matrices and nanoparticles of Al2O3 (1 wt%) as the reinforcement. Structure of the nanocomposites was examined, and their basic mechanical and tribological properties were tested. Distribution of primary silicon particles in the structure of nanocomposites has been improved compared to their distribution in the Zn25Al3Si matrix alloy due to the presence of Al2O3 nanoparticles and strontium. The primary silicon particles in the structure of the nanocomposites were found to be more fine-grained compared to the same particles in the structure of the as-cast Zn25Al3Si alloy. Tested mechanical properties of the nanocomposite with Zn25Al3Si alloy matrix are improved, compared to the matrix alloy. The nanocomposite with Zn25Al3Si0.03Sr alloy matrix is characterized with slightly higher value of compressive yield strength and a slightly lower hardness value compared to the as-cast Zn25Al3Si alloy. Both nanocomposites showed lower wear rate and higher coefficient of friction, compared to the matrix alloy, in sliding under the boundary lubricating regime. However, the nanocomposite with Zn25Al3Si alloy matrix showed better tribological properties than the nanocomposite with Zn25Al3Si0.03Sr alloy matrix.", publisher = "Springer Heidelberg, Heidelberg", journal = "Journal of the Brazilian Society of Mechanical Sciences and Engineering", title = "Effect of Al2O3 nanoparticles and strontium addition on structural, mechanical and tribological properties of Zn25Al3Si alloy", volume = "40", number = "11", doi = "10.1007/s40430-018-1441-9" }
Vencl, A., Bobić, B., Vučetić, F., Svoboda, P., Popović, V.,& Bobić, I.. (2018). Effect of Al2O3 nanoparticles and strontium addition on structural, mechanical and tribological properties of Zn25Al3Si alloy. in Journal of the Brazilian Society of Mechanical Sciences and Engineering Springer Heidelberg, Heidelberg., 40(11). https://doi.org/10.1007/s40430-018-1441-9
Vencl A, Bobić B, Vučetić F, Svoboda P, Popović V, Bobić I. Effect of Al2O3 nanoparticles and strontium addition on structural, mechanical and tribological properties of Zn25Al3Si alloy. in Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2018;40(11). doi:10.1007/s40430-018-1441-9 .
Vencl, Aleksandar, Bobić, Biljana, Vučetić, Filip, Svoboda, Petr, Popović, Vladimir, Bobić, Ilija, "Effect of Al2O3 nanoparticles and strontium addition on structural, mechanical and tribological properties of Zn25Al3Si alloy" in Journal of the Brazilian Society of Mechanical Sciences and Engineering, 40, no. 11 (2018), https://doi.org/10.1007/s40430-018-1441-9 . .