Претраживање
Приказ резултата 1-10 од 13
Microstructural and cavitation erosion behavior of the cualni shape memory alloy
(MDPI, 2021)
Microstructural and cavitation erosion testing was carried out on Cu-12.8Al-4.1Ni (wt. %) shape memory alloy (SMA) samples produced by continuous casting followed by heat treatment consisting of solution annealing at 885◦ ...
Electrodeposition of Aluminium-Vanadium Alloys from Chloroaluminate Based Molten Salt Containing Vanadium Ions
(MDPI, 2021)
The Al-V alloys were synthetized by potentiostatic electrodeposition onto a glassy carbon electrode from equimolar AlCl3 + NaCl bath containing vanadium ions at 200 °C. The alloy deposits were characterized by X-ray ...
Recovery of vanadium (V) oxyanions by a magnetic macroporous copolymer nanocomposite sorbent
(MDPI, 2021)
An amino‐functionalized magnetic macroporous copolymer of glycidyl methacrylate (GM) and ethylene glycol (E) dimethacrylate (m‐poly(GME)‐deta) was synthesized, fully characterized, and used to investigate the adsorption ...
Implementation of the Chicot–Lesage Composite Hardness Model in a Determination of Absolute Hardness of Copper Coatings Obtained by the Electrodeposition Processes
(MDPI, 2021)
The influence of various electrolysis parameters, such as the type of cathode, composition of the electrolyte and electrolysis time, on the morphology, structure and hardness of copper coatings has been investigated. ...
Electrorefining process of the non-commercial copper anodes
(MDPI, 2021)
The electrorefining process of the non-commercial Cu anodes was tested on the enlarged laboratory equipment over 72 h. Cu anodes with Ni content of 5 or 10 wt.% and total content of Pb, Sn, and Sb of about 1.5 wt.% were ...
Correlation of Morphology and Crystal Structure of Metal Powders Produced by Electrolysis Processes
(MDPI, 2021)
In this review paper, morphologies of metal powders produced by the constant (potentiostatic
and galvanostatic) regimes of electrolysis from aqueous electrolytes are correlated with
their crystal structure at the ...
Structural and electrochemical properties of nesting and core/shell pt/tio2 spherical particles synthesized by ultrasonic spray pyrolysis
(MDPI, 2020)
Pt/TiO2 composites were synthesized by single-step ultrasonic spray pyrolysis (USP) at different temperatures. In an in-situ method, Pt and TiO2 particles were generated from tetra-n-butyl orthotitanate and chloroplatinic ...
Zn-Co-CeO2 vs. Zn-Co Coatings: Effect of CeO2 Sol in the Enhancement of the Corrosion Performance of Electrodeposited Composite Coatings
(MDPI, 2021)
Electrodeposition and characterization of novel ceria-doped Zn-Co composite coatings was
the main goal of this research. Electrodeposited composite coatings were compared to pure Zn-Co
coatings obtained under the same ...
Morphology, Structure and Mechanical Properties of Copper Coatings Electrodeposited by Pulsating Current (PC) Regime on Si(111)
(MDPI, 2020)
Copper electrodeposition on (111)-oriented Si substrate was performed by the pulsating current (PC) regime at various average current densities in the range of 15–70 mA·cm−2, obtained by varying either the frequency (30, ...
Investigation on the Electrochemical Behaviour and Deposition Mechanism of Neodymium in NdF3–LiF–Nd2O3 Melt on Mo Electrode
(MDPI, 2020)
Neodymium was electrochemically deposited from NdF3–LiF–Nd2O3 molten salt electrolyte onto the Mo electrode at temperatures close to 1273 K. Cyclic voltammetry and chronoamperometry measurements were the applied electrochemical ...