Претраживање
Приказ резултата 21-30 од 41
Al-Pd alloy formation by aluminium underpotential deposition onto palladium from chloroaluminate melt
(Belgrade : ESG, 2021)
The possibility of electrochemical underpotential deposition of aluminium onto palladium from equimolar AlCl3+NaCl melts at temperatures between 200 ° and 300 °C was investigated. Electrochemical techniques used were cyclic ...
Estimation of the exchange current density and comparative analysis of morphology of electrochemically produced lead and zinc deposits
(Serbian Chemical Society, 2017)
The processes of lead and zinc electrodeposition from the very dilute electrolytes were compared by the analysis of polarization characteristics and by the scanning electron microscopic (SEM) analysis of the morphology of ...
Electrocrystallization of silver dendrites / Elektrokristalizacija dendrita srebra
(Belgrade, Serbia : Engineering Society for Corrosion, 2014)
Morphology of electrodeposited silver dendrites was investigated by scanning electron microscope (SEM). On the basis of morphological analysis, the structures and mechanism of growth were proposed. Silver dendrite is twin ...
Cross-section analysis of the morphology of electrodeposited copper obtained in the hydrogen co-deposition range / Morfologija poprečnog preseka prevlaka bakra dobijenih elektrohemijskim taloženjem u oblasti ko-depozicije vodonika
(Serbian Chemical Society, 2009)
Cross-section analysis of copper deposits electrodeposited in the hydrogen co-deposition range at a constant overpotential and in a pulsating overpotential (PO) regime was performed. It was shown that a complete structural ...
Zn-Co-CeO2 vs. Zn-Co Coatings: Effect of CeO2 Sol in the Enhancement of the Corrosion Performance of Electrodeposited Composite Coatings
(MDPI, 2021)
Electrodeposition and characterization of novel ceria-doped Zn-Co composite coatings was
the main goal of this research. Electrodeposited composite coatings were compared to pure Zn-Co
coatings obtained under the same ...
Fundamental aspects of lead electrodeposition processes: Nucleation and growth / Fundamentalni aspekti procesa elektrohemijskog taloženja olova - nukleacija i rast
(Belgrade, Serbia : Engineering Society for Corrosion, 2016)
In this comprehensive study, the processes of nucleation and growth of lead from electrolytes of various kind and compositions have been analyzed. The processes of Pb nucleation were examined by the analysis of potentiostatic ...
Electrochemical aspects of formation of dendrites / Elektrohemijski aspekti formiranja dendrita
(Belgrade, Serbia : Engineering Society for Corrosion, 2016)
The one of the main contributions of Belgrade Electrochemical School to the field of metal electrodeposition is investigation of a mechanism of formation and growth of the disperse deposits. Spongy-like, cauliflower-like, ...
Influence of the type of electrolyte on the morphological and crystallographic characteristics of lead powder particles / Uticaj tipa elektrolita na morfološke i kristalografske karakteristike praškastih čestica olova
(Serbian Chemical Society, 2013)
Lead electrodeposition processes from basic (nitrate) and complex (acetate) electrolytes were mutually compared by scanning electron microscopy and X-ray diffraction investigation of the produced powder particles. The shape ...
The study of Zn-Co alloy coatings electrochemically deposited by pulse current / Ispitivanje prevlaka Zn-Co legura dobijenih pulsirajućom strujom
(Association of Chemical Engineers of Serbia, 2012)
The electrochemical deposition by pulse current of Zn-Co alloy coatings on steel was examined, with the aim to find out whether pulse plating could produce alloys that could offer a better corrosion protection. The influence ...
Ternary Zn-Ni-Co alloy: anomalous codeposition and corrosion stability
(Serbian Chemical Society, 2015)
Electrochemically deposited Zn-Ni-Co alloys under various deposition conditions were investigated using atomic absorption spectroscopy for the determination of the chemical composition, atomic force microscopy for surface ...