Претраживање
Приказ резултата 1691-1700 од 1704
Expression and Characterization of a Dye-Decolorizing Peroxidase from Pseudomonas Fluorescens Pf0-1
(MDPI, 2019)
The consumption of dyes is increasing worldwide in line with the increase of population
and demand for clothes and other colored products. However, the e ciency of dyeing processes
is still poor and results in large ...
Poly(methyl methacrylate) denture base materials modified with ditetrahydrofurfuryl itaconate: Significant applicative properties
(Serbian Chemical Soc, Belgrade, 2015)
The aim of this work was to examine the possibility of modification of commercial denture base materials with itaconic acid esters, in order to obtain materials with lower toxicity and higher biocompatibility. Despite their ...
Application of Zirconia/Alumina composite oxide ceramics as photocatalysts for removal of 2,4,6-trichlorophenol from water
(MDPI, 2022)
The mesoporous zirconia/alumina composites were synthesized via a sol–gel method,
followed by heat treatment at 500 ◦C for 5 h. The effect of the ZrO2/Al2O3 ratio on the structural and
textural properties of the obtained ...
Electrochemical oxidation of 2,4,6-trichlorophenol on iron-doped nanozirconia cerami / Elektrohemijska oksidacija 2,4,6-trihlorfenola na nano-cirkonijum - oksidnoj matrici dopiranoj gvožđem
(Beograd: Srpsko hemijsko društvo, 2021)
Solvothermaly synthesized zirconium oxide nanopowders, pure and
doped with various amounts of iron ions (1–20 %), were used as modifiers of
glassy carbon electrodes. The modified electrodes were tested in the reaction ...
Application of Ni(II)-alumina Composites for Electrocatalytic Reduction of 4-nitrophenol
(International Institute for the Science of Sintering, Belgrade, 2020)
Nickel-alumina composites with various content of nickel were synthetized by sol-gel method. The characterization of samples was performed by diffuse reflectance spectroscopy and electrochemical impedance spectroscopy using ...
Study of Nd deposition onto W and Mo Cathodes from Molten Oxide-Fluoride Electrolyte
(Electrochemical Science Group (ESG), 2020)
Electrochemical reduction processes of Nd(III) on tungsten and molybdenum electrodes in NdF3+LiF and NdF3+LiF+Nd2O3 were investigated by cyclic voltammetry, chronoamperometry and open circuit measurements. Electrolytes and ...
Electrodeposition of Aluminium-Vanadium Alloys from Chloroaluminate Based Molten Salt Containing Vanadium Ions
(MDPI, 2021)
The Al-V alloys were synthetized by potentiostatic electrodeposition onto a glassy carbon electrode from equimolar AlCl3 + NaCl bath containing vanadium ions at 200 °C. The alloy deposits were characterized by X-ray ...
Al-Pd alloy formation by aluminium underpotential deposition onto palladium from chloroaluminate melt
(Belgrade : ESG, 2021)
The possibility of electrochemical underpotential deposition of aluminium onto palladium from equimolar AlCl3+NaCl melts at temperatures between 200 ° and 300 °C was investigated. Electrochemical techniques used were cyclic ...
Electrodeposition of Nb and Al from chloroaluminate melt on vitreous carbon
(Association of Metallurgical Engineers of Serbia AMES, 2016)
Niobium and aluminium were electrodeposited at 200 °C under argon
atmosphere onto vitreous carbon from inorganic chloroaluminate melts (AlCl3+NaCl)
with added niobium. Niobium was introduced into the electrolyte by anodic ...
Aluminum/zirconium alloys obtained by Al underpotential deposition onto Zr from low temperature AlCl3+NaCl molten salts / Легуре алуминијума и цирконијума добијене електрохемијским таложењем алуминијума при потпотенцијалу на цирконијуму из нискотемпературних AlCl3+NaCl растопа
(Belgrade : Serbian Chemical Society, 2019)
Contrary to the widely accepted hypothesis that it is not possible, aluminum underpotential deposition (UPD) onto zirconium from a low temperature (200, 250 and 300 °C) equimolar chloroaluminate melt was recorded. Furthermore, ...